why are vials made from vapor glass stronger then typical vials?
I.they contain aluminum instead of boron.
II. They submerged in hot salt bath.
III. They formed out of long glass tubes.
A) I
B) I and II
C) I and III
D) I, II, and III
Answer:
2
Explanation:
I'm not that sure plz tell me if this is right
True or False
a. The cones in our eyes detect color, while the rods perceive brightness.
b. In white light, white objects absorb all the colors.
c. At night, when light is dim, our cones are not activated so objects will appear as their normal color.
P.
d. Violet has the longest wavelength which is why it gets refracted the most.
V
e. The angle of incidence always equals the angle of reflection.
true
false
true
true
false
What is the smallest kind of volcano
Answer:
Cinder cones
Explanation:
If you have 500 mL of a 0.10 M solution of the acid, what mass of the corresponding sodium salt of the conjugate base do you need to make the buffer with a pH of 7.74 (assuming no change in volume)
Answer:
5.90g of NaClO are needed
Explanation:
Assuming the weak acid is HClO pKa = 7.54
To solve this question we must use the H-H equation for acids:
pH = pKa + log [A-] / [HA]
Where pH is the pH we want = 7.74
pKa is pKa of the weak acid = 7.54
[A-] could be taken as the moles of the conjugate base (Moles NaClO) and [HA] moles weak acid = 0.500L * (0.10mol/L) = 0.0500 moles HClO
Replacing:
7.74 = 7.54 + log [NaClO] / [0.0500 moles]
0.20 = log [NaClO] / [0.0500 moles]
1.5849 = [NaClO] / [0.0500 moles]
Moles NaClO = 0.0792 moles
The mass is: -Molar mass NaClO = 74.44g/mol-
0.0792 moles * (74.44g / 1mol) =
5.90g of NaClO are needed5.90g of NaClO mass of the sodium salt of the conjugate base are need to make the buffer with a pH of 7.74.
What is pH?pH tells the solution is acidic or basic. pH means potential hydrogen.
Given,
Assuming the weak acid is (hypochlorous acid) HClO
pKa = 7.54
[tex]pH = pKa + \dfrac{ log[A-] }{ [HA]}[/tex]
(Moles NaClO) and [HA] moles weak acid = 0.500L * (0.10mol/L) = 0.0500 moles HClO
Putting the value
[tex]7.74 = 7.54 + \dfrac{ log[NaClO] }{ [0.0500 moles]}\\0.20 =\dfrac{ log}{[0.0500 moles]} \\1.5849 =\dfrac{ [NaClO]}{Moles\;of\; NaClO } = 0.0792 moles[/tex]
The mass is
Molar mass NaClO
= 74.44g/mol - 0.0792 moles * (74.44g / 1mol)
=5.90g of NaClO are needed
Thus, 5.90g of NaClO are needed.
Learn more about pH, here:
https://brainly.com/question/15289741
More energy can be absorbed by a larger sample of a substance due to its higher mass.
True
or
False
?
Answer:
true
Explanation:
10. A community currently uses coal to produce electricity. What would be an
advantage of using nuclear energy instead? *
a. Uranium is safer than coal
b. Nuclear energy produces no waste
c. Uranium deposits are more abundant than coal
d. Nuclear energy does not produce greenhouse gases
Answer:
c
Explanation:
I'm pretty sure it's C. If it is not then it might be d
Which of these is most likely to create large areas of land subsidence?
A chloride ion, : Cl :i– , acts as a alternate base when it combines with
A. a OH– ion
B. a K+ ion
C. an H– ion
D. an H+ ion
Answer:
D
Explanation:
The answer is D...and if you need explanation you can comment
What volume of water would you add to 35.81 mL of 1.59 M acetic acid solution to make it a 0.97 M?
Answer: A volume of 58.69 mL of water would you add to 35.81 mL of 1.59 M acetic acid solution to make it a 0.97 M.
Explanation:
Given: [tex]V_{1}[/tex] = 35.81 mL, [tex]M_{1}[/tex] = 1.59 M
[tex]V_{2}[/tex] = ?, [tex]M_{2}[/tex] = 0.97 M
Formula used to calculate volume is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\1.59 M \times 35.81 mL = 0.97 M \times V_{2}\\V_{2} = 58.69 mL[/tex]
Thus, we can conclude that a volume of 58.69 mL of water would you add to 35.81 mL of 1.59 M acetic acid solution to make it a 0.97 M.
Find the moles of 127.5g of NaCl.
Answer:
n = 2.18 moles
Explanation:
Given that,
Mass = 127.5g
Molar mass of NaCl = 58.44 g/mol
We need to find the number of moles. We know that,
No. of moles = Given mass/molar mass
Put all the values,
[tex]n=\dfrac{127.5\ g}{58.44\ g/mol}\\\\n=2.18\ moles[/tex]
Hence, there are 2.18 moles of 127.5g of NaCl.
When temperature drops, (for example from 20 degrees celsius to 10 degrees celsius)
a.) energy increases
b.) particles move slower
c.) particles collide more often
d.) pressure increases
Answer:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
Explanation:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
what is the ingredient formula for petroleum
Answer:
(C15H15N)
Explanation:
What is indicated by the methyl-prefix?
Answer:
The molecule is a branched hydrocarbon.
Explanation:
The methyl prefix indicate the presence of a single carbon or the molecule is a branched hydrocarbon.
Prefix in IUPAC NomenclatureThe Prefix is used to show or indicate the substituents, side chains of the molecule and prefix attached to the beginning of a word and the molecules name is based on the number of carbon atoms in IUPAC nomenclature. The International Union of Pure and Applied Chemistry (IUPAC).
For Example:
Number of carbon Atoms Root Name Prefix (side group)
1 meth- methyl-
2 eth- ethyl-
3 prop- propyl-
4 but- butyl-
5 pent- pentyl-
6 hex- hexyl-
7 hept- heptyl-
Thus, we can say that prefix tells us the number of carbon atoms in each molecule. A presence of single carbon is indicated by the methyl prefix or we can also say that the molecule is branched hydrocarbon.
Learn more about the IUPAC nomenclature here: https://brainly.com/question/16903179
#SPJ2
Why is it important for scientists to use the scientific method?
Answer:
The scientific method attempts to minimize the influence of bias or prejudice in the experimenter. Even the best-intentioned scientists can't escape bias. ... That's the job of the scientific method. It provides an objective, standardized approach to conducting experiments and, in doing so, improves their results.
Answer:
to get used to them
Explanation:
you have to practice them so that they can get into your head
PLEASE HELP MEEEEEEEEEEEEE
Answer:
Explanation:
THE BEST ANSWER IS CCC
Write the chemical reaction happening in self heating cans …..
[tex]\huge\mathsf{\red{\underline{\underline{Answer}}}}[/tex]
[tex]{\green{\dashrightarrow}}[/tex]Self-heating cans work through an exothermic chemical reaction between two chemicals. Popular combinations are aluminum and silica, calcium oxide and water, and copper sulfate and zinc. When the two substances combine, the reaction produces enough heat to raise the temperature of the can.
The partial pressure of N2 in a mixture of gases, where the total pressure is 1.50 atm, is 300. torr. What is the mole fraction of N2
Answer:
The mole fraction of N₂ is 0.26.
Explanation:
The pressure exerted by a particular gas in a mixture is known as its partial pressure. So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:
PT = PA + PB
This relationship is due to the assumption that there are no attractive forces between the gases.
Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.
So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:
PA = XA * PT
In this case:
PA= PN₂= 300 torrXA=XN₂= ?PT= 1.50 atm= 1140 torr (being 1 atm= 760 torr)Replacing:
300 torr= XN₂*1140 torr
Solving:
[tex]X_{N_{2} } =\frac{300 torr}{1140 torr}[/tex]
XN₂= 0.26
The mole fraction of N₂ is 0.26.
How many significant figures are in the measurement 1.3000 meters
Answer:
5
Explanation:
mark me brainliest!
A group of students found metamorphic rocks near a campsite. The presence of metamorphic rock is most likely evidence of that the rock formed from .
Answer:
Igneous or sedimentary rocks.
Explanation:
The presence of metamorphic rock is most likely evidence of that the rock formed from igneous or sedimentary rocks. The igneous rock converted into metamorphic rocks when the rock experience intense heat and pressure within the Earth's crust. These metamorphic rocks are crystalline and often have a “squashed” texture. So due to high temperature and pressure, the metamorphic rock is formed from igneous rock.
Which of the following are base formulas? (Choose 2)
CH3OH
NH3
CH4
NaOH
HNO3
H2SO4
Answer:
Na0H
Ca(OH)2
NH40H
Are the answers
When crossing parents with genotypes Rr and rr what will be the percentage of the genotypes of the offspring
Answer:
Explanation:
Heterozygous cross with a hom.ozygous recessive yields the following results
50% rr (hom.ogyzous recessive)
50% Rr (heterozygous dominant)
A heterozygous cross with a homozygous recessive gives the following results: 50% rr (homozygous recessive) and 50% Rr (heterozygous dominant).
What is Parental crossing?Crossing over is a type of cellular process which occurs during the process of meiosis when chromosomes of the same type line up. When these two chromosomes – one from the mother and one from the father – line up, parts of the chromosome can be switched. Two chromosomes contain the same genes, but the genes may have different forms.
The organisms in this initial hybridization are called the parental or P generation. The progeny of the Rr x rr cross are called F1 generation which will have a heterozygous cross with the homozygous recessive giving the following results: 50% Rr (homozygous recessive) and 50% rr (heterozygous dominant)
A cross between two of the offspring in F1 generation would produce a new set of progeny called second filial generation (or F2 generation).
Thus, a heterozygous cross with a homozygous recessive gives the following results: 50% rr (homozygous recessive) and 50% Rr (heterozygous dominant).
Learn more about Parental crossing, here:
https://brainly.com/question/15033007
#SPJ2
PLZ HELP... provide the correct coefficients to balance the chemical equation C2H6+O2 -> CO2 + H20
What happens to a catalyst in a reaction?
Question 1 options:
a)
It is incorporated into the products.
b)
It remains unused.
c)
It is incorporated into the reactants.
d)
It evaporates.
Answer:
it's eveporates remains unused products
[tex]\huge{ \mathcal{ \underline{ Answer }\: \: ✓ }}[/tex]
Catalyst are substance that are added to a reaction in order to speed of the reaction.
And they remain the same before and after the reaction, hence the correct option is :
B. It remains unused.
__________________________
[tex]\mathrm{ ☠ \: TeeNForeveR \: ☠}[/tex]
The reaction of an acid and a base will always produce what kind of salt?
A.
a combination of the cation from the acid and the anion from the base
B.
a combination of the cation from a strong base and the anion from a weak acid
C.
neutral salts from the cation of a strong base and the anion from a weak acid
D.
basic salts from the cation of a strong base and a strong acid
E.
depends on the strength of the acid and the base
Explanation:
E maybe i am not sure or C
A student observed an example in which all of the offspring of an organism have the same
genetic material, which is identical to the parent organism. Based on this the student can
conclude that this organism
A.
is unicellular
B.
makes its own food.
C.
reproduces asexually.
D.
has a lot of genetic diversity.
HELP PLEASE!!!!!!!
140 grams of lead (II) nitrate are dissolved in water then mixed with a solution containing 75 grams of sodium chloride. The reaction creates the precipitate, lead (II) Chloride, and a solution of sodium nitrate. How many grams of lead (II) Chloride can be produced given the initial amount of lead (II) nitrate?
Answer:
Try a grams calculator, Its pretty to nd one :D
Explanation:
What does the electrostatic force do inside the nucleus?
A. It adds to the strong nuclear force.
B. It holds the protons and neutrons together. C. It causes the protons to repel each other.
D. It cancels out the strong nuclear force
Answer:
C. it causes the protons to repel each other.
How many grams of LiF are needed to make 87 g LiF solution into a
34.5% solution?
solution?
answer options:
30 g LIF
0.01 g LIF
45.8 g LIF
0.02 g LIF
Answer: 30 g LiF
Explanation:
How many moles of aluminum sulfide will be produced if 12 moles of Sg react?
Answer:
Molar mass = [9(12.0)+8(1.01)+4(16.0)] = 180.1 g/mol Moles = 112 g 1 mol x 180.1 g = 0.622 mol (3 sig figs)
Explanation:
is A tomato smells rotten a chemical
reaction
Answer:
yup
Explanation:
because chemical change took place
the reaction cant be reversible