Is it balanced or unbalanced

The net ionic equation for the reaction between iron (iii) sulfate and potassium hydroxide is

Fe³⁺(aq) + 3OH¯(aq) —> Fe(OH)₃(s) (Option B)

Chemical equations are representations of chemical reactions using symbols and formula of the reactants and products.

The reactants are located on the left side while the products are located on the right side.

Reactants —> Products

The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.

In solution

Fe₂(SO₄)₃ (aq) --> 2Fe³⁺(aq) + 3SO₄²⁻(aq)

KOH (aq) --> K⁺(aq) + OH¯(aq)

The reaction proceeds as follow

Fe₂(SO₄)₃ (aq) + KOH (aq) —>

Fe³⁺(aq) + SO₄²⁻(aq) + K⁺(aq) + OH¯(aq) —> Fe(OH)₃(s) + SO₄²⁻(aq) + K⁺(aq)

Cancel out the spectator ions (i.e SO₄²⁻ + K⁺) and balance to obtain the net ionic equation

Fe³⁺(aq) + 3OH¯(aq) —> Fe(OH)₃(s)

Learn more about chemical equation:

https://brainly.com/question/7181548

#SPJ9

Answer:

A. Whenever the population has increased, steel consumption has increased as well.

Explanation:

Based on the graph of US population and steel consumption, what could have led to the increase in steel consumption seen  on the graph is that whenever the population has increased, steel consumption has increased as well.

A critical look at the graph, you will discover that the population and the steel consumption are moving upwards (i.e they are increasing). It's seen that as the population increases, steel consumption increases. This is true because as the population increases, people are building houses, more transportation systems that require steel are being manufactured, more household utensils that are steel products are being fabricated etc; therefore the consumption of steel increases.

Answer: True

Explanation: The farther away from the center or heat.

Answer:

Yes

Explanation:

The equator is the imaginary belt around the earth and it is created and named because the sun mostly shines on that part/line making heat which causes it to be hot.

Answer:

648.7g of Mg must be added

Explanation:

Based on the reaction:

3Mg + 1/2P4 → Mg3P2

3 moles of Mg produce 1 mole of Mg3P2

To solve this problem we neeed to find the moles of Mg3P2 in 1200g. With these moles and the chemical reaction we can finf moles of Mg and its mass:

Moles Mg3P2 -Molar mass: 134.88g/mol-:

1200.0g Mg3P2 * (1mol / 134.88g) = 8.897 moles of Mg3P2

Moles Mg:

8.897 moles of Mg3P2 * (3mol Mg / 1mol Mg3P2) = 26.69 moles of Mg

Mass Mg -Molar mass: 24.305g/mol-:

26.69 moles of Mg * (24.305g / 1mol) =

Answer:

That animal is a Carnivore.

Explanation:

The skull is that of a Panther which is a carnivore. Hope this helps

Answer:

Explanation:

The new volume can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

Since we are finding the new volume

[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]

From the question we have

[tex]V_2 = \frac{25 \times 4.38}{0.65} = \frac{109.5}{0.65} \\ = 168.46153...[/tex]

We have the final answer as

Hope this helps you

Answer: The lowest possible whole number coefficient for water is 1.

Explanation:

A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble  water and remain in solid form are represented by (s) after their chemical formulas.

The balanced chemical reation for aqueous solutions of lithium hydroxide and acetic acid react to yield lithium acetate and water is:

[tex] LiOH(aq)+CH_3COOH(aq)\rightarrow CH_3COOLi(aq)+H_2O(l)[/tex]

Thus the lowest possible whole number coefficient for water is 1.

In the balanced equation for given reaction, the lowest possible whole number coefficient for water is one.

Stoichiometry of any reaction will tells about the relative amount of species presents before and after the chemical reaction.

Reaction between the lithium hydroxide and acetic acid is a neutralization reaction, as here lithium hydroxide is a base and acetic acid is a acid as a result of which it produces water molecule and lithium salt of acetate. And balanced equation for this will be represented as:

LiOH(aq) + CH₃COOH(aq)  CH₃COOLi(aq) + H₂O(l)

In the above equation all entities are present in equal amounts on both the sides and from the stoichiometry of the reaction it is clear that coefficient of water is 1.

Hence, 1 is the whole number coefficient for water.

To know more about stoichiometry, visit the below link:
https://brainly.com/question/16060199

Explanation: Crystallization or crystallization is the process by which a solid forms, where the atoms or molecules are highly organized into a structure known as a crystal.

HOPE THIS HELPS!!!! :)

Answer:

calcium

Explanation:

Answer:

A.wood

Explanation:

It is a poor conductor of heat

Answer:

Hydrogen, lithium, sodium, and potassium all have 1 valence electron ( an electron in the outermost energy level is a valence electron).

Answer:c. oxygen,light,and glucose combine to produce high energy molecules

Explanation:

Answer:A = $90

B = $390

Explanation:

The aspect of the environmentally sustainable society has not been soil erosion.

An environmentally sustainable society has been the one that has been able to meet the current and future needs of the generation. The plantation of trees, reducing the greenhouse effect, and the method for the generation of a sustainable environment has been the characteristic of a sustainable society.

The soil erosion results in damage to the soil with the flow of the upper layer of soil from the water flow. The soil erosion will be resultant in damage to the environmentally sustainable society.

For more information about environmentally sustainable society, refer to the link:

https://brainly.com/question/17666127

Answer:

The vacuole is the storage area of the cell. Most cells have one large vacuole. Vacuoles store food and other materials needed by the cell. They can also store waste products.

Explanation:

Answer:

Chemists generally use the mole as the unit for the number of atoms or molecules of a material. One mole (abbreviated mol) is equal to 6.022×1023 molecular entities (Avogadro's number), and each element has a different molar mass depending on the weight of 6.022×1023 of its atoms (1 mole).\

Have a great day!!!!

Explanation:

1 mole of (NH₄)₂CO₃ has:

Let's consider the chemical formula of ammonium carbonate: (NH₄)₂CO₃.

The subscripts inform us of the number of moles of atoms in 1 mole of molecules.

Nitrogen has 2 subscripts: "1" (which is not written) and "2" (outside the parenthesis). The global subscript for nitrogen is obtained by multiplying both subscripts.

[tex]N: 1 \times 2 = 2[/tex]

Hydrogen has 2 subscripts: "4" and "2" (outside the parenthesis). The global subscript for nitrogen is obtained by multiplying both subscripts.

[tex]H: 4 \times 2 = 8[/tex]

The subscript for carbon is "1".

The subscript for oxygen is "3".

1 mole of (NH₄)₂CO₃ has:

Learn more: https://brainly.com/question/375587

Answer:

Explanation:

The momentum of an object can be found by using the formula

momentum = mass × velocity

From the question we have

momentum = 2 × 85

We have the final answer as

Hope this helps you

Answer:

0.0500L of 3.00M HCl are needed to react completely

Explanation:

Hydrochloric acid HCl reacts with sodium carbonate, Na2CO3, as follows:

2HCl + Na₂CO₃ → 2NaCl + H₂O + CO₂

Where 2 moles of HCl reacts per mole of Na₂CO₃

To find the volume of 3.00M HCl needed to react completely we need first to calculate the moles of Na₂CO₃ added and, with this chemical equation we can solve for moles of HCl as follows:

Moles Na₂CO₃:

0.750L * (0.100moles Na₂CO₃ / L) = 0.0750moles

Moles HCl:

0.0750moles Na₂CO₃ * (2 moles HCl / 1 mole of Na₂CO₃) = 0.150 moles of HCl

Volume of 3.00M HCl:

0.150 moles of HCl * (1L / 3.00moles) =

Answer:

0.600 g/cm³

Explanation:

Step 1: Given data

Step 2: Calculate the volume of the cylinder

First, we have to determine the radius, which is half of the diameter.

r = d/2 = 2.34 cm/2 = 1.17 cm

Then, we use the formula for the volume of the cylinder.

V= π × r² × h

V= π × (1.17 cm)² × 6.62 cm

V = 28.5 cm³

Step 3: Calculate the density (ρ) of the sample

The density is equal to the mass divided by the volume.

ρ = m/V

ρ = 17.1 g/28.5 cm³

ρ = 0.600 g/cm³

Answer:

Gravitational to Mechanical to electrical

Explanation:

In a hydropower dam, the gravitational potential energy is converted to mechanical energy which in turn produces electrical energy.

Answer:

C. Mass

Explanation:

Answer:

Customary

Explanation:

Answer:

Customary

Explanation:

Answer:The Cl atom should transfer two electrons to Ca because it has more electrons

than Ca, so the formula becomes CaCl2.

Explanation: i took the quiz

Calcium forms ionic compound with two chlorine atoms as CaCl₂. Hence, Ca atom should transfer only one electron to one chlorine and the second electron is given to second Cl.  Thus, option C is correct.

Ionic bond is formed between a metal and non metal by losing electron from the metal. The non metal should be an electronegative atom to accept that electron and forms a negative charge.

While the metal forms a partial positive charge. This charge separation make them attractive each other and make it ionic.

Ca is a second group element have two valence electrons. Ca forms compounds with halogens by donating its two electrons  each to two halogen atoms and make a dihalide.

Cl have 7 electrons and tends to accept one electron from the metal to complete its octet. Thus one chlorine need only one electron from Ca. The second electron is then transferred to a second chlorine atom.

Therefore, the CaCl₂ compound is formed by transferring two electrons from calcium into two chlorine atom. Hence, option C ic correct.

To find more about ionic bonding, refer the link below:

https://brainly.com/question/11527546

#SPJ2

Answer:

The oxidation state of nitrogen in NO changes from +2 to 0, and the oxidation state of carbon in CO changes from +2 to +4 as the reaction proceeds.

Explanation:

In the catalytic converter, the oxidation number of nitrogen in NO changes from +2 to 0, and of carbon in CO changes from +2 to +4 as the reaction proceeds. Thus, option C is correct.

The catalytic converter is a device used in vehicle exhaust to reduce the emission of toxic gas. The reaction in the device occurs to convert the nitric oxide into oxygen and nitrogen.

The redox reaction is given as,

2NO(g) + 2CO(g) → N₂(g) + 2CO₂(g)

In the reduction half of the reaction, the electrons are lost (addition of oxygen) like in carbon monoxide the oxygen is added that changes the number from +2 to +4. CO is a reducing agent that oxidized the carbon atom.

In the reduction half of the reaction, the oxygen is removed (electrons are added) and is shown by NO where the oxygen was lost to form N₂ with oxidation +2 to 0.

Therefore, option C. NO is a reducing agent that reduced nitrogen in the reaction.

Learn more about catalytic converters here:

https://brainly.com/question/17093572

#SPJ6

Answer: C.

Explanation:

Answer

Incidentally, they all form dew but because grass is closer to the soil, which maintains heat longer than the air where tree leaves are found, you will find more condensation in that region. Also, higher up the wind and sun will allow faster evaporation which makes the dew less noticable on tree leaves.

Explanation:

Preferred objects of dew formation are thus poor conducting or well isolated from the ground, and non-metallic, while shiny metal coated surfaces are poor infrared radiators. ... If the wet soil beneath is the major source of vapor, however (this type of dew formation is called distillation), wind always seems adverse.

Answer:

need points

Explanation:

Answer:

nm

Explanation:

trust me:)

d. Fe(s) and Al(s)

In the redox reaction, it is also known  

Reducing agents are substances that experience oxidation  

Oxidizing agents are substances that experience reduction

The metal activity series is expressed in voltaic series  

Li-K-Ba-Ca-Na-Mg-Al-Mn- (H2O) -Zn-Cr-Fe-Cd-Co-Ni-Sn-Pb- (H) -Cu-Hg-Ag-Pt-Au  

The more to the left, the metal is more reactive (easily release electrons) and the stronger reducing agent  

The more to the right, the metal is less reactive (harder to release electrons) and the stronger oxidizing agent

So that the metal located on the left can push the metal on the right in the redox reaction  

The electrodes which are easier to reduce than hydrogen (H), have E cells = +

The electrodes which are easier to oxidize than hydrogen have a sign E cell = -

So the above metals or metal ions will reduce Pb²⁺ (aq) will be located to the left of the Pb in the voltaic series or which have a more negative E cell value (greater reduction power)

The metal  : d. Fe(s) and Al(s)