Infrared and microwaves are two sorts of electromagnetic radiation that are commonly utilized for communication purposes.
What are examples of electromagnetic radiation?One case of the utilize of infrared radiation for communication is in inaccessible controls for electronic gadgets. Infrared signals are utilized to transmit commands from the farther control to the gadget, such as changing the channel on a tv or altering the volume on a sound framework.
One case of the utilize of microwaves for communication is in cellular phone systems. Microwaves are utilized to transmit data between cell phone towers and versatile gadgets. The recurrence of the microwaves utilized in cell phone systems is regularly within the run of 800 MHz to 2.5 GHz.
Learn more about electromagnetic radiation from
https://brainly.com/question/29696752
#SPJ1
Question 19
Of the following, the one classified as a compound is:
a. aluminum
b. ammonia
c. nitrogen
d. sulfur
The compound among the options is b. ammonia, which is composed of the elements nitrogen and hydrogen. Aluminum, nitrogen, and sulfur are elements, not compounds.
The term "compound" refers to a substance formed by the combination of two or more elements in fixed proportions. In the given options, the one classified as a compound is:
b. ammonia
Ammonia (NH3) is a compound formed by the elements nitrogen and hydrogen. The other options - aluminum, nitrogen, and sulfur - are all elements and not compounds.
To know more about Ammonia click here .
brainly.com/question/31525313
#SPJ11
Selecting a Microbicidal Chemical (cont'd)
•Noncorrosive or nonstaining properties
•Sanitizing and deodorizing properties
•Affordability and ready availability
•___ ____ can completely fulfill all of these requirements:
-Glutaraldehyde and _____ ____ approach this ideal.
a. No single microbicidal chemical can completely fulfill all of these requirements.
b. Glutaraldehyde and hydrogen peroxide approach this ideal.
To answer your question about selecting a microbicidal chemical that fulfills certain requirements, such as noncorrosive or nonstaining properties, sanitizing and deodorizing properties, and affordability and ready availability:
No single chemical can completely fulfill all of these requirements. However, glutaraldehyde and hydrogen peroxide approach this ideal.Both of these chemicals possess strong microbicidal properties and are relatively affordable and readily available. Additionally, they exhibit some sanitizing and deodorizing properties. It's important to note, however, that no perfect microbicidal chemical exists that meets every requirement completely.
Learn more about microbicidal: https://brainly.com/question/15390106
#SPJ11
Calcium hydroxide has a Ksp of 4.68 x10^-6.
a. How many moles of calcium hydroxide will dissolve in 1 L of pure water (it’s molar solubility)?
b. At most, how many moles of calcium hydroxide will dissolve in 1 L of 3.25 M NaOH solution?
c. What minimum concentration of sodium hydroxide is needed to precipitate calcium from a 0.015 M solution of calcium chloride?
a) The molar solubility of calcium hydroxide in 1 L of pure water is 1.35 x 10⁻² mol/L.
b) In a 3.25 M NaOH solution, the maximum moles of calcium hydroxide that will dissolve is 1.44 x 10⁻² mol.
c) A minimum NaOH concentration of 0.030 M is needed to precipitate calcium from a 0.015 M solution of calcium chloride.
a) Ca(OH)₂ ⇌ Ca²⁺ + 2OH⁻
Ksp = [Ca²⁺][OH⁻]² = 4.68 x 10⁻⁶
Let x = molar solubility of Ca(OH)₂, so [Ca²⁺] = x, [OH⁻] = 2x
Ksp = x(2x)² => x = √(Ksp/4) = √(4.68 x 10⁻⁶/4) = 1.35 x 10⁻² mol/L
b) In 3.25 M NaOH, [OH⁻] = 3.25 M
Ksp = [Ca²⁺][(3.25 + 2x)²] => x = (Ksp - 3.25²) / (4 * 3.25) = 1.44 x 10⁻² mol
c) CaCl₂ + 2NaOH → Ca(OH)₂ + 2NaCl
[Ca²⁺] = 0.015 M, Ksp = [Ca²⁺][OH⁻]² => [OH⁻] = √(Ksp/[Ca²⁺]) = √(4.68 x 10⁻⁶/0.015) = 0.030 M
To know more about molar solubility click on below link:
https://brainly.com/question/28170449#
#SPJ11
Which type of pressure sensor uses a wire fastened to a diaphragm?
a.) Bellows sensor
b.) Strain gauge
c.) Helical sensor
d.) Diaphragm element
Strain gauge is the type of pressure sensor uses a wire fastened to a diaphragm. Hence, option B is correct.
Naturally, resistive pressure sensors utilize the change produced in electrical resistance of a strain gauge that is bonded to the diaphragm that's exposed to the pressure medium.
Resistive or piezoresistive effect is the effect that is defined as the resistive pressure measurement sensors utilize the change in electrical resistance of a strain gauge bonded to the diaphragm (which is also known as a flexure element) which is exposed to the pressure medium.
Generally a diaphragm pressure transducer is defined as a mechanical device which is used in the conversion of pressure changes into an electric signal, that is generally measured to gauge changes in pressure. Hence, option B is correct.
Learn more about pressure sensor from the link given below.
https://brainly.com/question/18882857
#SPJ4
How do you get an acyl halide from a carboxylic acid?
To obtain an acyl halide from a carboxylic acid, you can use a reagent called thionyl chloride (SOCl[tex]^{2}[/tex]) or phosphorus pentachloride (PCl[tex]^{5}[/tex]). These reagents react with the carboxylic acid to form an intermediate called an acyl chloride or acyl halide, along with the corresponding hydrogen halide (HCl or HBr).
To obtain an acyl halide from a carboxylic acid:
1. Start with a carboxylic acid molecule, which has the general formula R-COOH, where R represents an alkyl or aryl group.
2. Choose an appropriate halogenating agent, such as thionyl chloride (SOCl[tex]^{2}[/tex]) for converting the carboxylic acid into an acyl chloride, or phosphorus tribromide (PBr[tex]_{3}[/tex]) for converting it into an acyl bromide.
3. Combine the carboxylic acid and the halogenating agent in a suitable reaction vessel, typically under anhydrous conditions to prevent unwanted side reactions with water.
4. Allow the reaction to proceed, during which the -OH group in the carboxylic acid will be replaced by a halogen atom (e.g., -Cl or -Br), resulting in the formation of the desired acyl halide.
5. After the reaction is complete, separate the acyl halide product from the reaction mixture using appropriate purification techniques, such as distillation or chromatography.
The final product will be an acyl halide with the general formula R-COX, where R is the same alkyl or aryl group from the starting carboxylic acid, and X is the halogen atom (e.g., Cl or Br).
More on acids and halides: https://brainly.com/question/31377595
#SPJ11
Mario is taking a math test. A special strategy he should use would be to:
Mario can use his scratch paper to jot down important information or intermediate calculations. This will help him to keep track of his work and ensure that he doesn't lose any important information along the way. By using these strategies, Mario can improve his performance on the math test and increase his chances of success.
One special strategy that Mario can use while taking a math test is to read the instructions and questions carefully. This will help him to understand the requirements of each question and avoid making careless mistakes. In addition, it will help him to identify any important information or key terms that may be necessary for solving the problem.
Another strategy that Mario can use is to work through the test systematically, starting with the easiest questions and moving on to the more difficult ones. This will help him to build confidence and momentum as he progresses through the test. He can also use this strategy to manage his time effectively, making sure to allocate enough time for each question based on its difficulty level.
For such more questions on Mario:
https://brainly.com/question/2292981
#SPJ11
Safety and Infection Control
Safe Use of Equipment -
Airway Management: Use of Home Oxygen (RM FUND 9.0 Ch 53)
-nurse should teach the client to apply a water-based lubricant to protect the nares from drying during oxygen therapy
-the nurse should teach the client to leave the nasal cannula on while eating because it does not interfere with eating
-the nurse should teach the client that a disadvantage of the nasal cannula is that it dislodges easily. the client should form the habit of checking its position periodically and readjusting it as necessary
-the nurse should teach the client about oxygen toxicity, which is a complication of o2 therapy, usually from high concentrations or long durations
(s/s: nonproductive cough, substernal pain, nasal suffices, nausea, vomiting, fatigue, HA, sore throat, and hypoventilation. Client should be taught to report these promptly
-the nurse should also teach the client that o2 is combustible and thus increases the risk of fire injuries. no one in the house should smoke or use any device that might generative sparks int eat area where the oxygen is in use
This information provides guidelines for the safe use of home oxygen therapy equipment.
Some important points to remember include:
Applying water-based lubricant: The nurse should teach the client to apply a water-based lubricant to the nares during oxygen therapy to prevent drying of the nasal mucosa.Leaving nasal cannula on while eating: The client can leave the nasal cannula in place while eating since it does not interfere with eating.Checking the position of the nasal cannula periodically: The nurse should teach the client that the nasal cannula may dislodge easily and that they should check its position periodically and readjust it as necessary.Oxygen toxicity: The client should be taught about oxygen toxicity, which is a complication of oxygen therapy that may occur from high concentrations or long durations of oxygen therapy. The nurse should educate the client about the signs and symptoms of oxygen toxicity, which include a nonproductive cough, substernal pain, nasal stuffiness, nausea, vomiting, fatigue, headache, sore throat, and hypoventilation. The client should be instructed to report these symptoms promptly.Risk of fire injuries: The nurse should educate the client that oxygen is a combustible gas and increases the risk of fire injuries. Therefore, no one in the house should smoke or use any device that might generate sparks in the area where the oxygen is in use.For more question on home oxygen click on
https://brainly.com/question/5470502
#SPJ11
Why did we choose TPA-25....(the specific Alu)?
The TPA-25 as the specific Alu because it has been shown to have a high level of activity in retrotran position, the process by which Alu elements replicate and insert themselves into new locations in the genome. TPA-25 has been well-studied and characterized in previous research, making it a reliable target for experimentation.
The TPA-25 the specific Alu for the reasons Specificity TPA-25 is a specific Alu sequence that has been identified for its unique characteristics. It helps target a particular region within the genome, ensuring precise and accurate analysis.
Reliability TPA-25 is a well-studied and reliable Alu sequence, which means that it has been proven to produce consistent and trustworthy results in various studies and applications Relevance The choice of TPA-25 may be based on its relevance to the research question or the biological process under investigation. It could be associated with a specific gene, trait, or disease, making it an ideal candidate for the study. Ease of detection TPA-25 may have been chosen due to its ease of detection through various molecular techniques, such as PCR or sequencing, which allows researchers to effectively and efficiently study the sequence. In summary, we chose TPA-25 the specific Alu because of its specificity, reliability, relevance, and ease of detection in genomic research.
learn more about specific here
https://brainly.com/question/11297584
#SPJ11
The copper tubing connecting multiple chlorine cylinders to a manifold assembly is called the?
a) Pigtail
b) Service Connection
c) Chlorine Conduit
d) Chemical Tubing
The copper tubing connecting multiple chlorine cylinders to a manifold assembly is called the Pigtail.
Manifold Pigtails are used to connect medical gas high pressure cylinders to the manifold header bars. These pigtails undergo high pressure gas before entering the manifold and these pigtails should be replaced per the manufacture recommendations, or if there is noticeable damage. Pigtails are designed to withstand pressures up to 3000psi. When ordering pigtails, it’s important to note whether your pigtail must have a check valve. Most pigtails come with the proper CGA fittings and are a braided stainless-steel construction. However, per the NFPA 99, Oxygen manifolds are required to have coffer pigtails that do not contain any polymeric materials.
To know more about Pigtail
please click:-
https://brainly.com/question/16777277
#SPJ11
Which one of the following atoms has the largest radius?
A) Ne
B) Cl
C) F
D) S
E) O
The answer is A) Ne. This is because as you move down a group (vertical column) on the periodic table, the atomic radius tends to increase.
Neon (Ne) is located in the last row of the noble gases, and therefore has the largest atomic radius among the given options. Chlorine (Cl), fluorine (F), sulfur (S), and oxygen (O) are all located in the nonmetal group, but they are higher up in the periodic table and therefore have smaller radii. Atomic radius is the distance from the center of an atom to the outermost energy level of its electrons. Atomic radius is determined by several factors, including the number of protons and electrons in the atom, the number of electron shells, and the size of the nucleus. Since Neon has 10 protons, 10 electrons, and two electron shells, it has a larger radius than the other atoms listed.
To learn more about atomic radius click here https://brainly.com/question/29440273
#SPJ11
Indicate the element that has been oxidized and the one that has been reduced:2C2H2 + 5O2 --> 4CO4 + 2H2O
In the reaction, the element that has been oxidized is carbon (C) from C₂H₂, as it increases its oxidation state from +2 in C₂H₂ to +4 in CO₂. The element that has been reduced is oxygen (O) from O₂, as it decreases its oxidation state from 0 in O₂ to -2 in CO₂ and H₂O.
In the reaction 2C₂H₂ + 5O₂ → 4CO₂ + 2H₂O, carbon (C) undergoes oxidation as it gains oxygen atoms and increases its oxidation state from -1 in C₂H₂ to +4 in CO₂. This represents a loss of electrons by carbon, which is characteristic of oxidation. On the other hand, oxygen (O) undergoes reduction as it loses oxygen atoms and decreases its oxidation state from 0 in O₂ to -2 in CO₂ and H₂O. This represents a gain of electrons by oxygen, which is characteristic of reduction.
Learn more about oxidation here:
https://brainly.com/question/9496279
#SPJ11
In the given equation, the element that has been oxidized is carbon, and the one that has been reduced is oxygen. This can be determined by looking at the changes in oxidation numbers of the elements involved.
In the equation reactants, each carbon atom in C2H2 has an oxidation number of -1, while each oxygen atom in O2 has an oxidation number of 0. In the products, each carbon atom in CO has an oxidation number of +2, while each oxygen atom in H2O has an oxidation number of -2. This means that the carbon atoms have gained electrons (reduced) and the oxygen atoms have lost electrons (oxidized).
To summarize, the element that has been oxidized is oxygen, and the one that has been reduced is carbon. It is important to understand the concept of oxidation-reduction reactions as they play a vital role in various chemical processes.
learn more about equation here
https://brainly.com/question/30360236
#SPJ11
the density of pure water is 1 g/ml. when doing ppm and ppb calculations, we assume 1 l of solution weighs 1 kg. this means that we assume that the density of the solution is 1 g/ml. why are we allowed to make this assumption?
Answer:
A 5.0-g sample of spinal fluid contains 3.75 mg (0.00375 g) of glucose. What is the percent by mass of glucose in spinal fluid?
Solution
The spinal fluid sample contains roughly 4 mg of glucose in 5000 mg of fluid, so the mass fraction of glucose should be a bit less than one part in 1000, or about 0.1%. Substituting the given masses into the equation defining mass percentage yields:
%glucose=3.75mgglucose×1g1000mg5.0gspinalfluid=0.075%(8.3.2)
The computed mass percentage agrees with our rough estimate (it’s a bit less than 0.1%).
Explanation:
Electron withdrawing vs donating...what do each do to a negative charge and acidity?
An electron withdrawing group will decrease the negative charge and increase acidity, while an electron donating group will increase the negative charge and decrease acidity.
Electron withdrawing groups (EWGs) pull electrons away from a molecule or atom, creating a positive charge on that molecule or atom. This results in an increase in acidity because the positive charge makes it easier for the molecule or atom to donate a proton. On the other hand, electron donating groups (EDGs) push electrons towards a molecule or atom, creating a negative charge on that molecule or atom. This results in a decrease in acidity because the negative charge makes it harder for the molecule or atom to donate a proton. Therefore, EWGs increase acidity while EDGs decrease acidity.
Learn more about molecule Refer: https://brainly.com/question/15089056
#SPJ11
In drinking water regulations, the abbreviation "MCL" stands for?
a) Maximum contaminant level
b) Multiple constituent levels
c) Most common level
d) Minimum considered legal
The abbreviation "MCL" in drinking water regulations stands for A) Maximum contaminant level. It refers to the highest level of a contaminant that is allowed in public water systems under the Safe Drinking Water Act.
MCLs are set by the U.S. Environmental Protection Agency (EPA) based on health considerations and the ability of treatment technologies to remove the contaminant from drinking water.
The Safe Drinking Water Act (SDWA) is a federal law in the United States that regulates the quality of public drinking water. The law requires the U.S. Environmental Protection Agency (EPA) to establish national drinking water standards, including Maximum Contaminant Levels (MCLs) for certain contaminants in public water systems.
An MCL is the highest level of a contaminant that is allowed in drinking water, as determined by the EPA. MCLs are established based on health considerations and the ability of treatment technologies to remove the contaminant from drinking water. MCLs are enforceable standards that all public water systems must comply with.
For more question on MCL click on
https://brainly.com/question/13287116
#SPJ11
A student mixes 40.mL of 0.10MHBr(aq) with 60.mL of 0.10MKOH(aq) at 25°C. What is the [OH−] of the resulting solution?
A
[OH−]=0.060M
B
[OH−]=0.033M
C
[OH−]=0.020M
D
[OH−]=0.00000010M
The [[tex]OH^-[/tex]] of the resulting solution is C) [[tex]OH^-[/tex]]=0.020M.
The balanced chemical equation for the reaction between HBr and KOH is:
[tex]HBr + KOH[/tex] → [tex]KBr + H_2O[/tex]
From the balanced equation, we can see that one mole of KOH reacts with one mole of HBr to produce one mole of water and one mole of KBr.
First, we need to determine the number of moles of HBr and KOH in the solution:
moles of HBr = (0.10 M) x (0.040 L) = 0.0040 moles
moles of KOH = (0.10 M) x (0.060 L) = 0.0060 moles
Since KOH and HBr react in a 1:1 ratio, the number of moles of HBr that react with KOH is 0.0040 moles.
This means that there are 0.0060 - 0.0040 = 0.0020 moles of KOH remaining after the reaction.
The total volume of the solution is 40 mL + 60 mL = 100 mL = 0.100 L.
The concentration of [tex]OH^-[/tex] in the remaining KOH solution is:
[[tex]OH^-[/tex]] = moles of KOH remaining / total volume of the solution
[[tex]OH^-[/tex]] = 0.0020 moles / 0.100 L
[[tex]OH^-[/tex]] = 0.020 M
For more question on solution click on
https://brainly.com/question/25326161
#SPJ11
What is the minimum chlorine residual that must be maintained in a potable water distribution system?
a) 0.2 mg/l
b) 0.5 mg/l
c) 1.0 mg/l
d) 2.0 mg/l
The minimum chlorine residual that must be maintained in a potable water distribution system is option (b) 0.5 mg/l.
A water distribution system is a portion of the water supply network that consists of elements that deliver potable water from a centralised treatment plant or wells to users to meet their needs for residential, commercial, industrial, and fire fighting purposes.
The phrase "water distribution network" refers to the section of a water distribution system that runs up to the service points of bulk water users or demand nodes, which group together many consumers.
Pipelines, storage spaces, pumps, and other accessories make up a water distribution system.
Hence, The minimum chlorine residual that must be maintained in a potable water distribution system is option (b) 0.5 mg/l.
To know more about water distribution system click here:
https://brainly.com/question/30779584
#SPJ11
Why don't vinyl or aryl halides undergo Sn2?
Vinyl and aryl halides do not undergo Sn2 reactions due to their respective electronic configurations. Both vinyl and aryl halides have a significant degree of pi-bonding character in their molecular orbitals, which causes the carbon-halogen bond to be highly polarized.
As a result, the carbon-halogen bond becomes highly reactive toward nucleophilic attack, which can lead to the formation of carbocation intermediates. These carbocation intermediates are highly unstable and reactive, and they can quickly react with solvent molecules, rendering them incapable of undergoing Sn2 reactions. Additionally, the steric hindrance of the aryl group in aryl halides can also inhibit Sn2 reactions by making it difficult for a nucleophile to approach the carbon atom. Overall, the electronic and steric properties of vinyl and aryl halides prevent them from undergoing Sn2 reactions.
Find out more about Sn2 reactions
at brainly.com/question/29341964
#SPJ11
How many moles of C are in 1.22 moles of C6H12O6?A) 7.32 moles C D) 14.7 moles CB) 87.9 moles C E) 2.44 moles CC) 1.22 moles C
The number of moles of C in 1.22 moles of C₆H₁₂O₆ you need to multiply the moles of C₆H₁₂O₆ by the number of carbon atoms in the molecule: [tex](1.22 moles) C_6H_{12}O_6* 6 moles C/moleC_6H_{12}O_6 = 7.32 moles[/tex]
The correct answer is A) 7.32 moles C.
The molecular formula of C₆H₁₂O₆ represents one molecule of glucose, which contains six carbon atoms (C), twelve hydrogen atoms (H), and six oxygen atoms (O).
Given that the number of moles of C₆H₁₂O₆ is 1.22 moles, we can determine the number of moles of carbon (C) atoms in 1.22 moles of C₆H₁₂O₆ by multiplying the number of moles of C₆H₁₂O₆ by the ratio of carbon atoms to molecules of C₆H₁₂O₆.
The ratio of carbon atoms to molecules of C₆H₁₂O₆is 6:1, as there are six carbon atoms in one molecule of C₆H₁₂O₆
So, the number of moles of C atoms in 1.22 moles of C₆H₁₂O₆ is:
[tex](1.22 moles) C_6H_{12}O_6* 6 moles C/moleC_6H_{12}O_6 = 7.32 moles[/tex]
Learn more about moles here:
https://brainly.com/question/26416088
#SPJ11
Question 63
At the top of the US Environmental Protection Agencies list of the 18 top cancer risks is:
a. Indoor air pollution
b. Sulfur dioxide
c. Carbon monoxide
d. Nitrogen dioxide
Indoor air pollution is at the top of the US Environmental Protection Agency's list of the 18 top cancer risks.
Indoor air pollution is at the top of the US Environmental Protection Agency's list of the 18 top cancer risks. Indoor air pollution can come from a variety of sources, including tobacco smoke, radon, volatile organic compounds (VOCs), and combustion byproducts from gas-fired appliances, wood-burning stoves, and fireplaces.
Exposure to these indoor air pollutants has been linked to a variety of health problems, including cancer, respiratory problems, and other chronic diseases. As a result, the EPA has identified indoor air pollution as a significant public health risk and has developed guidelines and regulations to help reduce exposure to indoor air pollutants.
Visit to know more about Indoor air pollution:-
brainly.com/question/14518398
#SPJ11
what volume will 2.0 moles of oxygen occupy at 720 mmHg and 21 o C ?
Answer:
We may utilise the ideal gas law to answer this problem, which links a gas's pressure, volume, number of moles, and temperature:
PV = nRT
where P denotes atmospheric pressure (atm), V denotes volume in litres (L), n is the number of moles, R denotes the gas constant (0.08206 Latm/(molK)), and T denotes temperature in Kelvin (K).
To begin, we must convert pressure from mmHg to atm and temperature from Celsius to Kelvin:
720 mmHg equals 0.947 atm
21°C = 294 K
Then, using the supplied parameters, we can solve for the volume using the ideal gas law:
V = nRT/P
(2.0 mol)(0.08206 Latm/(molK))(294 K)/(0.947 atm)
V ≈ 50.3 L
SOO the answer is , 2.0 moles of oxygen will occupy approximately 50.3 liters of volume at 720 mmHg and 21°C.
(im so sorry if its wrong)
what is nitrogen containing compound is found in the urine of mammals and is widely used in fertilizer?
Answer: Urea (Chemical Formula:CH₄N₂O) is found in the urine of animals - kind of like the name suggests! It's also used in fertilizers to provide plants with nitrogen for healthy growth.
Why do the Br- and Cl- not attack the alkyl iodides that form in the SN2 reaction carried out?
This results in a greater tendency for [tex]SN2[/tex] reactions to occur with alkyl iodides, as compared to alkyl bromides or chlorides.
How will be [tex]Br-[/tex] and [tex]Cl-[/tex] not attack the alkyl iodides?In an [tex]SN2[/tex] (substitution nucleophilic bimolecular) reaction, a nucleophile attacks the substrate, which is typically an alkyl halide, at the same time as a leaving group departs.
In the case of the reaction between an alkyl iodide and a nucleophile, such as [tex]Br-[/tex] or [tex]Cl-[/tex], the nucleophile may not attack the newly formed alkyl iodide because of the large size difference between iodine and bromine or chlorine.
Iodine is a much larger atom than both bromine and chlorine, and it has a weaker bond with carbon.
This makes the C-I bond more polarizable, meaning it is easier to distort the electron density around the iodine atom.
When the leaving group departs from the carbon atom, it leaves behind a positively charged carbon atom, which is highly reactive and susceptible to attack by nucleophiles.
At the same time, the large size of the iodine atom makes it more difficult for the nucleophile to approach the carbon atom and attack it.
On the other hand, bromine and chlorine are much smaller atoms, which makes them less polarizable and less likely to distort the electron density around the carbon atom.
Additionally, the smaller size of these atoms allows them to approach the carbon atom more closely, which increases the likelihood of steric hindrance from the alkyl groups present around the carbon atom.
This steric hindrance makes it difficult for the nucleophile to attack the carbon atom, further reducing the likelihood of reaction.
Therefore, due to the large size difference between iodine and bromine or chlorine, the newly formed alkyl iodide is much more reactive and susceptible to attack by nucleophiles than alkyl bromides or chlorides, which have smaller halogens.
Learn more about alkyl bromides
brainly.com/question/29803884
#SPJ11
Consider a solution initially containing 0. 50 mol ammonia (nh3) and 0. 30 mol of ammonium ion (nh4 ). What is the ph after addition of 0. 20 mol of hcl to this solution? (nh4 , ka = 5. 6 × 10–10 )?
The pH value after addition of 0.20 mol of HCl to this solution is found to be 9.03.
We can use the Henderson-Hasselbalch equation to calculate the pH of the solution after the addition of HCl,
pH = pKa + log([NH₃]/[NH₄⁺])
Initially, the concentration of NH₃ is 0.50 mol and the concentration of NH₄⁺ is 0.30 mol. After adding 0.20 mol of HCl, the concentration of NH₄⁺ increases by 0.20 mol, while the concentration of NH₃ decreases by the same amount. Therefore, the new concentrations are,
[NH₃] = 0.50 - 0.20 = 0.30 mol
[NH₄⁺] = 0.30 + 0.20 = 0.50 mol
The dissociation constant, Ka, for NH₄⁺ is 5.6 × 10⁻¹⁰.
The pKa for this system is determined from the expression,
Ka = [NH₃][H₃O⁺] / [NH₄⁺]
pKa = - log Ka
Using the given Ka value, we can calculate the pKa,
pKa = -log (5.6 × 10⁻¹⁰) = 9.25
Now, we can substitute the values for [NH₃], [NH₄⁺], and pKa into the Henderson-Hasselbalch equation,
pH = 9.25 + log(0.30/0.50)
Simplifying,
pH = 9.25 - 0.22
Therefore, the pH of the solution after the addition of HCl is approximately 9.03.
To know more about Henderson-Hasselbalch equation, visit,
https://brainly.com/question/13423434
#SPJ4
an aqueous solution of gold nitrate, au(no3)3 undergoes electrolysis in order to plate on a necklace, requiring 0.50 hours using 4.50 amperes of current. what mass of gold in grams is plated on the necklace? faraday's const
5.52 grams mass of gold will be plated on the necklace.
What is mass?
Faraday's constant is 96,485 Coulombs per mole.
To calculate the mass of gold plated on the necklace, we need to know the amount of charge that has passed through the electrolytic cell during the electrolysis process. We can calculate the charge using the equation:
charge = current x time
charge = 4.50 A x 0.50 h x 3600 s/h = 8100 C
Next, we need to calculate the moles of electrons involved in the electrolysis process. Each mole of [tex]Au(NO_{3})_{3}[/tex] requires 3 moles of electrons to reduce [tex]Au_{3}^{+}[/tex] to metallic gold. So, the moles of electrons is:
moles of electrons = charge / Faraday's constant / 3
moles of electrons = 8100 C / (96,485 C/mol) / 3 = 0.0280 mol
Finally, we can calculate the mass of gold using the molar mass of gold, which is 196.97 g/mol:
mass of gold = moles of electrons x molar mass of gold
mass of gold = 0.0280 mol x 196.97 g/mol = 5.52 g
Therefore, 5.52 grams of gold will be plated on the necklace.
To know more about gold, visit:
https://brainly.com/question/16585110
#SPJ1
Complete question is: an aqueous solution of gold nitrate, [tex]Au(NO_{3})_{3}[/tex]undergoes electrolysis in order to plate on a necklace, requiring 0.50 hours using 4.50 amperes of current. 5.52 grams mass of gold is plated on the necklace.
Indicate the element that has been oxidized and the one that has been reduced.2Na + FeCl2 --> 2NaCl + Fe
In this reaction, the element that has been oxidized is Fe (iron) because it has lost electrons to form Fe²⁺ ions. The element that has been reduced is Na (sodium) because it has gained electrons to form Na+ ions.
Oxidation is the process of losing electrons, while reduction is the process of gaining electrons. In this case, sodium (Na) is oxidized because it loses electrons, going from its elemental state (Na) to forming Na+ ions (NaCl). Sodium loses one electron to become a Na+ ion. On the other hand, iron (Fe) is reduced because it gains electrons, going from a compound FeCl₂ (where iron is in the +2 oxidation state) to its elemental state (Fe). Iron gains two electrons to become neutral iron atoms.
Learn more about Oxidation here:
https://brainly.com/question/9496279
#SPJ11
Consider the following elementary steps that make up the mechanism of a certain reaction:
2A→B+C
B+D→E+C
Q1. Which species is a reaction intermediate?
1. A
2. B
3. C
4. D
5. E
The intermediate species in the reaction is B. Hence, the correct option is 2.
Generally a reactive intermediate is defined as a short-lived, high-energy, highly reactive molecule. When it is generated in a chemical reaction, reaction intermediate gets quickly converted into a more stable molecule. For example : carbocation, carboanion, free radicals etc.
The overall chemical reaction can be obtained by the addition of both steps:
2A + B + D —> B + 2C + E
remove common species B
2A + D —> 2C + E
Answer:
2A + D —> 2C + E
Intermediate is present in product of 1st step and reactant of 2nd step
B is such an element
So, B is an intermediates
Answer: B Hence, the correct option is 2.
Learn more about intermediates from the link given below.
https://brainly.com/question/14944914
#SPJ4
Question 106
Any time a MCL is exceeded the NTNCWA must give notice by continuous posting in a conspicuous location within the area served by the water system.
a. True
b. False
Any time a MCL is exceeded the NTNCWA must give notice by continuous posting in a conspicuous location within the area served by the water system. True
According to the National Primary Drinking Water Regulations under the Safe Drinking Water Act, when the maximum contaminant level (MCL) is exceeded, the water system must notify its customers as soon as possible, but the notification requirement does not necessarily involve continuous posting.
The water system can use various methods to provide notice, including hand-delivered notices, mail, telephone, or other methods, as long as the notice reaches customers within a specified timeframe. The specific notification requirements vary depending on the contaminant and the severity of the violation.
Learn more about water system
https://brainly.com/question/29219204
#SPJ4
It is not likely that a person gives off any nonalcoholic organics vapors or is it?
It is possible for a person to give off nonalcoholic organic vapors, as the human body produces a variety of volatile organic compounds (VOCs) through various metabolic processes.
However, the amount and type of VOCs emitted by an individual can vary based on factors such as diet, activity level, and genetics.
Additionally, the presence of nonalcoholic organic vapors in a person's breath or sweat does not necessarily indicate any health concerns or problems.
It is not likely that a person gives off nonalcoholic organic vapors, as the human body typically does not produce or emit such substances in significant amounts.
To know more about Nonalcoholic click here .
brainly.com/question/12733338
#SPJ11
Question 49
The majority of sulfur dioxide originated from:
a. Automobile exhaust
b. Coal and oil burning power plants
c. Industrial smelters
d. Volcanic eruptions
The majority of sulfur dioxide originated from option B: Coal and oil burning power plants, while some parts come from option D: volcanic eruptions.
A colorless gas that is easily soluble in water is sulfur dioxide (SO₂). It is mostly produced by burning fossil fuels for electricity production, industry, and home heating. Sulfur dioxide is released in huge amounts during volcanic eruptions. The enormous amounts of sulfur dioxide released during a single eruption may be sufficient to change the climate on a large scale.
In a similar way, sulfur dioxide is released into the air by hot springs. Even the reaction of hydrogen sulfide with atmospheric oxygen might result in the production of sulfur dioxide. Marshes and other areas where biological degradation is occurring release hydrogen sulfide.
To know more about sulfur dioxide, refer:
https://brainly.com/question/14891308
#SPJ4
What physical state of matter is associated the particles having least amount of thermal energy?
gas
solid
liquid
All phases of matter contain the same measure of thermal energy.
The physical state of matter associated with particles having the least amount of thermal energy is solid.
Answer - The physical state of matter that is associated with particles having the least amount of thermal energy is a solid. In a solid, the particles are tightly packed together and have very little kinetic energy, making it the state with the lowest thermal energy. In contrast, gases have the highest thermal energy as the particles are spread out and have the most kinetic energy. Liquids fall in between solids and gases in terms of thermal energy. It should be noted, however, that different substances have different amounts of thermal energy at the same state of matter. Finally, the statement "All phases of matter contain the same measure of thermal energy" is incorrect.
To learn more about thermal energy -
brainly.com/question/30859008
#SPJ11