The 5 Whys technique is most commonly used in Step 2: Diagnosis and analysis of causes in the decision-making process. Option D is the correct answer.
The 5 Whys technique is a problem-solving tool used to identify the root causes of a problem or decision requirement. It involves asking "why" multiple times (typically five times) to delve deeper into the underlying causes of an issue.
By repeatedly asking "why," managers can uncover the primary factors contributing to the problem and gain a better understanding of its true causes. This step of diagnosis and analysis of causes is crucial in order to identify and address the fundamental issues that need to be resolved before moving on to alternative selection and evaluation in subsequent steps.
Learn more about decision-making at
https://brainly.com/question/5682075
#SPJ4
Techbirds (Pty) Ltd is a national retailer of computer products and accessories that includes a very popular high-tech touch screen laptop. The company has 60 branches across the country. Techbirds’ research team had gathered the average monthly sales figures for the laptop for the past 12 months from all its branches and developed the following demand equation for its product:
Q = 15 000 – 2.8PHT + 150A + 0.3PSL + 0.35PDC + 0.2P LC
(5.2) (1.29) (175) (0.12) (0.17) (0.13) (SEE)
R2 = 0.68 SEE = 786 F = 21.25
The independent variables and their values are:
• Q = quantity demanded
• PHT = Price of high-tech touch screen laptop = R7 000
• A = Advertising expenditure (units of measurement is R1 000) = 52
• PSL = Average price of company’s standard laptops = R4 000
• PDC = Average price of company’s desktop computers = R15 000
• PLC = Average price of leading competitor’s best-selling laptop = R8 000
Required Note:
• Where relevant, show all calculations including relevant formulas.
• Where relevant, apply the "Rule of 2" for t-testing.
Calculate the elasticities for the high-tech laptop (PHT) and advertising expenditure
Q1 = 15 000 – 2.8PHT + 150A + 0.3PSL + 0.35PDC + 0.2P LCQ2 = 15 000 – 2.8PHT + 150(52.52) + 0.3PSL + 0.35PDC + 0.2PLCQ1 = 15 000 – 2.8(7000) + 150(52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q1 = 96 556Q2 = 15 000 – 2.8(7000) + 150(52.52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q2 = 96 615∆Qd = 96 615 – 96 556 = 59PED = ∆Qd / ∆A = 59 / 0.52 = 113.
Given:Q = 15 000 – 2.8PHT + 150A + 0.3PSL + 0.35PDC + 0.2PLC (5.2) (1.29) (175) (0.12) (0.17) (0.13) (SEE)R2 = 0.68 SEE = 786 F = 21.25Where,Q = Quantity demandedPHT = Price of high-tech touch screen laptop = R7 000A = Advertising expenditure (units of measurement is R1 000) = 52PSL = Average price of company’s standard laptops = R4 000PDC = Average price of company’s desktop computers = R15 000PLC = Average price of leading competitor’s best-selling laptop = R8 000The formula for the calculation of price elasticity of demand is given by:PED = ∆Qd / ∆PWhere,PED = Price elasticity of demand∆Qd = Change in quantity demanded∆P = Change in priceLet us calculate the elasticity for the high-tech laptop (PHT).For this, we need the coefficient of PHT. We can get that from the given demand function which is -2.8.PED = ∆Qd / ∆PTherefore, we need to calculate ∆Qd and ∆P. Let us assume the change in price (∆P) as 1%. Therefore,∆P = 1% of PHT = 1/100 x 7000 = 70So, the new price is 7000 + 70 = 7070 ∆Qd = Q2 - Q1For this, we need the quantity demanded at both prices PHT and PHT + ∆PQ1 = 15 000 – 2.8PHT + 150A + 0.3PSL + 0.35PDC + 0.2P LCQ2 = 15 000 – 2.8(7070) + 150A + 0.3PSL + 0.35PDC + 0.2PLCQ1 = 15 000 – 2.8(7000) + 150(52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q1 = 96 556Q2 = 15 000 – 2.8(7070) + 150(52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q2 = 95 194∆Qd = 96 556 – 95 194 = 136PED = ∆Qd / ∆P = 136 / 70 = 1.94Since the elasticity value is greater than 1, the demand for high-tech touch screen laptop is elastic.Now, let's calculate the elasticity of demand for advertising expenditure (A).We need the coefficient of A. From the given demand function, the coefficient of A is 150.PED = ∆Qd / ∆PTherefore, we need to calculate ∆Qd and ∆A. Let us assume the change in advertising expenditure (∆A) as 1%. Therefore,∆A = 1% of A = 1/100 x 52 = 0.52So, the new advertising expenditure is 52 + 0.52 = 52.52∆Qd = Q2 - Q1For this, we need the quantity demanded at both levels of advertising expenditure (A and A + ∆A)Q1 = 15 000 – 2.8PHT + 150A + 0.3PSL + 0.35PDC + 0.2P LCQ2 = 15 000 – 2.8PHT + 150(52.52) + 0.3PSL + 0.35PDC + 0.2PLCQ1 = 15 000 – 2.8(7000) + 150(52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q1 = 96 556Q2 = 15 000 – 2.8(7000) + 150(52.52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q2 = 96 615∆Qd = 96 615 – 96 556 = 59PED = ∆Qd / ∆A = 59 / 0.52 = 113.5Since the elasticity value is greater than 1, the demand for the laptop is elastic to advertising expenditure. Therefore, a decrease in advertising expenditure will cause a decrease in the quantity demanded more than proportionally, and an increase in advertising expenditure will cause an increase in the quantity demanded more than proportionally.
To know more about Average visit:
https://brainly.com/question/24057012
#SPJ11
A bond fund manager makes a forecast that she believes will be accurate about interest rates in five years. She forecasts that 7-year bonds will yield 3% five years from now. Currently, a 12-year bond pays interest once per year of 4% and sells for price of $927.25.
If the fund manager’s prediction is correct, what will the bond’s price be five years from now in dollars and cents.
To calculate the bond's price five years from now, we can use the bond pricing formula.
Given:
Current bond price = $927.25
Current coupon rate = 4% (annual coupon payment as a percentage of face value)
Face value (par value) = $1,000
Time to maturity = 12 years
Forecasted yield (interest rate) after 5 years = 3%
First, we need to calculate the present value of the bond's future cash flows after 5 years. The bond will have 7 years remaining to maturity at that point.
Using the formula for present value of a bond:
Bond Price = C * (1 - (1 + r)^-n) / r + F * (1 + r)^-n
where:
C = Coupon payment per period (annual coupon payment)
r = Discount rate (yield to maturity)
n = Number of periods (remaining years to maturity)
F = Face value (par value)
We can substitute the given values into the formula:
Coupon payment per period (C) = 4% * $1,000 = $40
Discount rate (r) = 3% (forecasted yield after 5 years)
Number of periods (n) = 7 years (remaining years to maturity)
Face value (F) = $1,000
Using these values, we can calculate the present value of the bond's future cash flows after 5 years:
Present Value = $40 * (1 - (1 + 0.03)^-7) / 0.03 + $1,000 * (1 + 0.03)^-7
≈ $256.99 + $852.05
≈ $1,109.04
Therefore, if the fund manager's prediction is correct and the 7-year bonds yield 3% after 5 years, the bond's price five years from now will be approximately $1,109.04.
To know more about prediction visit-
brainly.com/question/31790173
#SPJ11
Following are the transactions of Green Company.
May 1 The company provided $2,900 of sustainability consulting services on credit to a customer. 3 The company purchased $750 of energy-efficient supplies on credit.
9 The company collected $1,400 cash as partial payment of the May 1 consulting revenue.
20 The company paid $750 cash toward the payable for energy-efficient supplies.
31 The company paid $550 cash for May's renewable energy utilities.
Prepare general journal entries for the above transactions.
View transaction list
Journal entry worksheet
<
1
2
3 4
5
The company provided $2,900 of sustainability consulting services on credit to a customer.
Note: Enter debits before credits.
Date May 01
General Journal
Debit
Credit
Journal Entries of Green Company include The company had $2,900 in accounts receivable and $750 in inventory and accounts payable on May 1. They purchased $750 of supplies on credit on May 3 and collected $1,400 in cash for consulting revenue on May 9 and so on.
May 1:
Accounts Receivable (Assets) 2,900
Service Revenue (Equity) 2,900
To record the provision of sustainability consulting services on credit.
May 3:
Inventory (Assets) 750
Accounts Payable (Liabilities) 750
To record the purchase of energy-efficient supplies on credit.
May 9:
Accounts Receivable (Assets) 1,400
Cash (Assets) 1,400
To record the collection of cash as partial payment for the consulting revenue.
May 20:
Accounts Payable (Liabilities) 750
Cash (Assets) 750
To record the payment of cash towards the payable for energy-efficient supplies.
May 31:
Utilities Expense (Expenses) 550
Cash (Assets) 550
To record the payment of cash for May's renewable energy utilities.
These general journal entries capture the key transactions of Green Energy Company during the month of May. On May 1, the company provided sustainability consulting services on credit, creating an account receivable for $2,900 and recognizing service revenue.
On May 3, the company purchased energy-efficient supplies on credit, increasing the inventory and accounts payable accounts by $750. On May 9, the company collected $1,400 in cash as a partial payment for the consulting revenue, reducing the accounts receivable and increasing the cash account.
On May 20, the company made a cash payment of $750 towards the payable for energy-efficient supplies, reducing the accounts payable and cash accounts. Finally, on May 31, the company paid $550 in cash for May's renewable energy utilities, recognizing the utilities expense and reducing the cash account.
These journal entries accurately reflect the financial transactions and provide a clear record of the company's activities during the month of May.
To know more about Journal Entries refer here:
https://brainly.com/question/29314309#
#SPJ11
Recall the formula for figuring a company's inventory turnover ratio. Click the answer you think is right. a.inventory turnover- Cost of goods sold/Average inventory b.Inventory -Merchandis Inventory/Average inventory c.Inventory turnover - Merchandise Inventory/Cost of goods sold d.Inventory turnover- Cost of goods sold/Gross profit Do you know the answer?
Option A) Cost of goods sold divided by average merchandise inventory is used to calculate inventory turnover.
Inventory turnover is a measure of efficiency that reveals how frequently a company has sold through its typical inventory of goods.
A company's inventory turnover is a financial measure that reveals how frequently it changed hands in relation to its cost of goods sold (COGS) within a specific time period. To determine the average number of days it takes to sell its inventory, a business can divide the number of days in the period (usually a fiscal year) by the inventory turnover ratio.
Businesses can improve their pricing, production, marketing, and purchasing decisions by using the inventory turnover ratio. One of the efficiency ratios used to determine how efficiently a business uses its resources is this one.
Learn more about Cost of goods sold here.
https://brainly.com/question/28483498
#SPJ4
Oriole Company has recently decided to go public and has hired you as an independent CPA. One statement that the enterprise is anxious to have prepared is a statement of cash flows. Financial statemen
Selling expenses encompass all depreciation costs. The operating activities' net cash flow is $ 276,000 . Option B is correct.
Working:
Oriole Company
Statement of Cash Flows
For the Year Ended December 31, 2022
Cash flows from operating activities:
Net Income $ 276,000
Adjustments to reconcile net income to
Net cash provided by operating activities
Depreciation expense $ 87,000
Loss on sale of equipment [285000-240000] $ 45,000
Increase in Account Receivables [83600-96800] $ (146,000)
Decrease in Inventory [482000-386000] $ 96,000
Increase in accounts payable [176000-97000] $79,000
Decrease in Income taxes payable [351000-393000] $(42,000)
$119,000
Net cash Provided by operating activities $ 395,000
T-Account: Calculation of depreciation:
Accumulated Depreciation
Depreciation Of sold asset $69,000 Beg Balance $304,000
[354000-285000]
Depreciation Expense $87,000
End Balance $322,000
Due to use, wear and tear, or becoming obsolete, an asset loses value over time. Depreciation is the measurement of this decrease. Depreciation, or the value loss of an asset, can also be brought on by a variety of other factors, such as adverse market conditions, for example. A appreciable asset's wear and tear, consumption, or other loss of value is measured by depreciation.
Other factors that contribute to depreciation include use, the passage of time, and changes in technology and the market. Devaluation cost is the sum that an organization's resources are deteriorated for a solitary period (e.g, quarter or the year), while collected devaluation is the aggregate sum of wear to date. Accumulated depreciation and depreciation expense are not the same thing.
Learn more about depreciation :
brainly.com/question/29894489
#SPJ4
Complete question as follows :
Oriole Company has recently decided to go public and has hired you as an independent CPA. One statement that the enterprise is anxious to have prepared is a statement of cash flows. Financial statements of Oriole Company for 2022 and 2021 are provided below. BALANCE SHEETS 12/31/22 Cash $408000 Accounts receivable 360000 Inventory 386000 Property, plant and equipment $607000 Less accumulated depreciation (322000) 285000 $1439000 12/31/21 $ 192000 214000 482000 $958000 (304000) 654000 $1542000 Accounts payable Income taxes payable Bonds payable Common stock Retained earnings $ 176000 351000 362000 228000 322000 $1439000 $ 97000 393000 598000 218000 236000 $1542000 $8390000 7154000 1236000 INCOME STATEMENT For the Year Ended December 31, 2022 Sales revenue Cost of sales Gross profit prom Selling expenses $602000 Administrative expenses 192000 Income from operations Interest expense Income before taxes Income taxes Net income 794000 442000 74000 368000 92000 $ 276000 The following additional data were provided: sale. The loss on sale was incorrectly charged to 1. Dividends for the year 2022 were $190000. 2. During the year, equipment was sold for $240000. This equipment cost $354000 originally and had a book value of $285000 at the time cost of sales 3. All depreciation expense is in the selling expense category. The net cash provided by operating activities is
A. $189000
B. $276000
C. $395000
D. $231000.
If defects are noted on a residential Seller's Property Disclosure Statement, the owner shall also provide
A. a description of the defects.
B. an estimate of the amount of the defects' adverse effect on property value.
C. an estimate of the amount of the defects' adverse effect on expected normal life of the premises, if the defects are not repaired
D. a contractor's estimate of the cost of repairs.
If defects are noted on a residential Seller's Property Disclosure Statement, the owner shall also provide a description of the defects. The correct answer is: A.
A Residential Seller's Property Disclosure Statement is a document that is used to disclose any known material defects in a property to a potential buyer.
The statement must be completed by the seller and provided to the buyer before or at the time an offer is made. The statement must include a description of any known material defects in the property.
The owner is not required to provide an estimate of the amount of the defects' adverse effect on property value, an estimate of the amount of the defects' adverse effect on expected normal life of the premises, if the defects are not repaired, or a contractor's estimate of the cost of repairs.
However, the owner may choose to provide this information if they have it.
The purpose of the Residential Seller's Property Disclosure Statement is to protect both the buyer and the seller. The statement helps to ensure that the buyer is aware of any known material defects in the property before they make an offer.
The statement also helps to protect the seller from liability for any defects that are not disclosed.
Therefore, the correct option is A, a description of the defects.
To know more about Residential Property Disclosure, refer here:
https://brainly.com/question/28499800#
#SPJ11
The main topics to be included within a proper business plan
(500 words)
A proper business plan is an essential document that serves as a roadmap for a company's success. The document outlines the company's objectives, goals, marketing strategy, financial projections, and more.
Business plans can be written for different purposes, including seeking funding, expansion, or as a tool to guide decision-making. The main topics to be included within a proper business plan:
Executive Summary: The executive summary is a summary of the entire business plan. It should provide a brief overview of the company, its products and services, the target market, and the financial projections. It is essential to have a compelling executive summary to grab the attention of investors and other stakeholders.
Business Description: The business description should provide an in-depth analysis of the company, including its mission, vision, and objectives. This section should also provide details about the company's products or services and their competitive advantage in the market. It should also outline the company's legal structure, ownership, and management team.
Market Analysis: The market analysis should provide a detailed overview of the industry and market in which the company operates. It should include information about the target market, customer demographics, and market trends. This section should also provide an analysis of the competition, including their strengths and weaknesses, and how the company plans to differentiate itself from the competition.
Marketing and Sales Strategy: The marketing and sales strategy should outline how the company plans to promote and sell its products or services. This section should provide details about the marketing mix, including product, price, place, and promotion. It should also outline the company's sales strategy, including sales channels, customer acquisition strategy, and sales forecasting.
Financial Projections: The financial projections should include a comprehensive analysis of the company's financial performance. It should include financial statements such as income statements, balance sheets, and cash flow statements. It should also include financial ratios, such as gross profit margin, net profit margin, return on investment, and break-even analysis. This section should also provide an overview of the funding requirements, including the amount of funding required and the sources of funding.
Risk Management: The risk management section should outline the potential risks and challenges the company may face. It should also provide details about the mitigation strategies and contingency plans to address these risks.
Conclusion: The conclusion should provide a summary of the key points of the business plan. It should reiterate the company's objectives, mission, and vision. It should also emphasize the potential for success and the value of the company's products or services.
For more about business plan:
https://brainly.com/question/13160849
#SPJ11
Write a paragraph about how locate underground utilities. You
can write it in number or bullet point style.
Locating underground utilities is a vital process that involves identifying the precise location of pipes, cables, and other infrastructure that exist below the ground's surface.
Here are the steps involved in locating underground utilities: Research - before beginning any excavation work, it is essential to carry out research to find out which utilities are buried in the area. Researching can be done by contacting utility companies and government agencies. Visually Inspect the Site - after carrying out research, it is vital to inspect the site physically. Look for signs such as painted marks, utility costs, and manhole covers. These signs help to identify where underground utilities are located.
Use of Technology - modern technologies such as ground-penetrating radar (GPR), utility locators, and electromagnetic detection can be used to locate underground utilities. These technologies help identify the location of underground utilities more accurately. Dig with Caution - Excavation should be done carefully and in a controlled manner to prevent any damage to underground utilities. It is crucial to expose underground utilities without disturbing them to maintain their functionality and prevent future damage.
To learn more about ground-penetrating radar, visit here
https://brainly.com/question/23689018
#SPJ11
TRUE OR FALSE breakthrough discoveries typically require that the entrepreneurial team have deep expertise in a technical field and extensive networks within scientific and technical communities.
True. Breakthrough discoveries often require deep technical expertise to understand complex problems and develop innovative solutions. Extensive networks within scientific and technical communities provide access to knowledge, resources, and collaboration opportunities, enhancing the chances of success in translating discoveries into practical applications.
Breakthrough discoveries often involve solving complex technical problems that require specialized knowledge and expertise. Having a deep understanding of the underlying principles and technologies is crucial for identifying novel approaches and developing innovative solutions. Without technical expertise, it can be challenging to navigate the intricacies of the field and make significant breakthroughs.
Additionally, extensive networks within scientific and technical communities play a vital role in breakthrough discoveries. These networks provide access to cutting-edge research, collaboration opportunities, and mentorship from experts in the field. Building connections with other researchers, scientists, and industry professionals can lead to valuable insights, funding opportunities, and partnerships that accelerate the development and commercialization of breakthrough discoveries.
In summary, deep technical expertise and extensive networks within scientific and technical communities are often critical factors for entrepreneurial teams seeking to make breakthrough discoveries.
Learn more about entrepreneurial here:
https://brainly.com/question/30103080
#SPJ11
Michael Ltd makes calculators that sell for $20 each. The
company’s annual production and sales is 20,000 calculators. The
fixed manufacturing overhead is 30,000 and $50,000 is fixed
administrative
It is necessary to allocate the $30,000 fixed manufacturing overhead cost to the 20,000 calculators that Michael Ltd produces annually.
Michael Ltd makes calculators that sell for $20 each. The company's annual production and sales are 20,000 calculators. The fixed manufacturing overhead is $30,000, and $50,000 is the fixed administrative expense.
Michael Ltd can use different techniques to allocate the manufacturing overhead to the products it produces. For instance, it can use the traditional or conventional method or the activity-based costing (ABC) method.
However, in this case, we will use the traditional method to allocate the fixed manufacturing overhead cost to the company's calculators produced.
The traditional method allocates the manufacturing overhead cost based on a single allocation base, such as labor or machine hours. Michael Ltd's fixed manufacturing overhead is $30,000, which is a sunk cost since the cost is already committed and can not be changed.
Therefore, it is necessary to allocate the $30,000 fixed manufacturing overhead cost to the 20,000 calculators that Michael Ltd produces annually.
Using the traditional method, the cost allocation base for Michael Ltd is direct labor hours. The company uses the following information to allocate the fixed manufacturing overhead cost: Direct materials per unit
= $5Direct labor cost per unit
= $2Variable manufacturing overhead cost per unit
= $3Total variable cost per unit
= $10Total cost per unit
= $14Selling price per unit
= $20The direct labor hours per unit are calculated as follows: Direct labor hours per unit
= Direct labor cost per unit / Direct labor rate
= $2 / $10 per hour
= 0.2 direct labor hours per unit to calculate the predetermined overhead rate, we divide the total fixed manufacturing overhead cost by the total direct labor hours as follows: Predetermined overhead rate
= Total fixed manufacturing overhead cost / Total direct labor hours
= $30,000 / 4,000 direct labor hours
= $7.5 per direct labor hourFinally, to allocate the fixed manufacturing overhead cost to the calculators produced, we multiply the predetermined overhead rate by the direct labor hours per unit.
Thus, the fixed manufacturing overhead cost per unit is: Fixed manufacturing overhead cost per unit = Predetermined overhead rate x Direct labor hours per unit
= $7.5 per direct labor hour x 0.2 direct labor hours per unit
= $1.5 per unit therefore, the total cost of the calculators produced is: Total cost per unit
= Variable cost per unit + Fixed manufacturing overhead cost per unit= $10 per unit + $1.5 per unit
= $11.5 per unitHence, Michael Ltd's total annual cost of producing 20,000 calculators is: Total cost of producing 20,000 calculators
= Total cost per unit x Number of units produced= $11.5 per unit x 20,000 units= $230,000Therefore, Michael Ltd's total annual production cost is $230,000.
For more such questions on Michael Ltd
https://brainly.com/question/26353194
#SPJ11
The sole game worth playing is relationships despite their notorious risks." Please explain this quote in relation to the importance of social capital. According to Ulrich Beck, "We live in a risk society." Risk society is "an inescapable structural condition of advanced industrialization." He explains the risk society in the most straightforward sentence.
"…Everyone is connected…."
"I asked myself what concept would better define our age. The answer was: risk. Risk touches life itself."
Ulrich Beck – Risk Society 1986
a. What is critical about this theory? Why are we living in a risk society? Please give examples.
b. Why is it essential that we have a macro and micro vision of the world?
a. Critical points about this theory: We live in a risk society where risks are not natural, but produced by human activities, such as industrial production, transportation, medicine, science, and technology.
We can recognize the risks, but not their consequences. The consequences of the risks are not evenly distributed in society; some groups are more vulnerable than others to environmental and health risks. The risks are global, and we cannot contain them within national. Example: One example of this is climate change which affects everyone across the world, but some groups will experience its consequences more acutely than others. Another example is the COVID-19 pandemic which has shown how interconnected and vulnerable we all are to global risks.b.
It is essential that we have a macro and micro vision of the world because Macro: It allows us to see the big picture of the risk society and how it affects us all. We can understand how risks are produced, how they are distributed, and how they are managed. It helps us to see the interconnections between different risks and how they interact. Micro:It allows us to see how the risk society affects individuals and communities in different ways. It helps us to understand how people perceive and respond to risks based on their social, economic, and cultural backgrounds. It allows us to see how social capital can be used to mitigate risks and create resilience.
To know more about technology visit:
https://brainly.com/question/28288301
#SPJ11
In policy announcements made last year the RBA indicated that it
was unlikely to raise the cash rate until 2024 at the earliest. How
has the RBA’s assessment of the situation changed since then?
The RBA's assessment of the situation has improved due to better-than-expected economic performance and progress in vaccination against COVID-19. The bank has maintained the cash rate at 0.1% and plans to continue supporting the economy through its bond-buying program.
In policy announcements made last year, the Reserve Bank of Australia (RBA) indicated that it was unlikely to raise the cash rate until 2024 at the earliest. However, since then, the RBA’s assessment of the situation has changed due to various factors.
The Australian economy has performed better than expected, and the country's progress in vaccination against COVID-19 has been encouraging. These factors have contributed to the RBA's improved assessment of the situation.In July 2021, the RBA announced that it would maintain the current policy settings, including the cash rate target at 0.1%, but would adjust its bond-buying program's pace. The RBA has acknowledged that economic growth is expected to be strong in 2021 and 2022. The bank also noted that inflation is expected to rise temporarily due to supply chain disruptions and higher oil prices, but the RBA predicts that it will stabilize at about 2%.
The RBA Governor, Philip Lowe, noted that the bank is still not considering an increase in the cash rate, but it may start to gradually taper its bond purchases if the economy continues to perform well. The bank also plans to keep inflation between 2-3%, which is the target rate.
In conclusion, the RBA's assessment of the situation has improved due to better-than-expected economic performance and progress in vaccination against COVID-19. The bank has maintained the cash rate at 0.1% and plans to continue supporting the economy through its bond-buying program. However, if the economy continues to perform well, the RBA may consider tapering its bond purchases in the future.
Learn more about Reserve Bank of Australia here:
https://brainly.com/question/31573317
#SPJ11
Imagine that you have been hired to help conduct a CBA for the construction of a rapid transit system parallel to a major city street. The city is motivated by the negative externalities of cars and the social benefits of rapid transit. Describe the following problems associated with the calculation of a CBA for rapid transit investments: (1) Choice of the discount rate, (2) Shadow prices, (3) Double-counting of costs or benefits, (4) Salvage values, and (5) Price distortions.
One of the risks in CBA is that forecasted events may not occur. Explain how the response of commuters could end up reducing the benefits of the investment in rapid transit envisioned by the study.
Cost-Benefit Analysis (CBA) is a method of calculating the benefits and costs of a project. It aims to identify whether the project would be profitable and worth pursuing.
When conducting CBA for the construction of a rapid transit system parallel to a major city street, there are various problems associated with the calculation of CBA. These include:
1. Choice of discount rate: When carrying out the CBA for a rapid transit system, it is essential to consider the discount rate. The discount rate is the rate used to convert future benefits and costs into present value. The choice of the discount rate is crucial, as it can have a significant impact on the outcome of the CB
2. Shadow prices: Shadow prices refer to the price of a resource that is not usually traded in the market. These include environmental factors such as air quality and green spaces.
3. Double-counting of costs or benefits: Double-counting occurs when a single item is counted twice in the CBA analysis. For instance, the benefits of reduced traffic congestion may be counted both as travel time saved and the reduction in vehicle operating costs
4. Salvage values: Salvage value refers to the value of an asset after its useful life has ended
5. Price distortions: When carrying out CBA, price distortions can occur when prices do not reflect the true cost of a good or service. The response of commuters could end up reducing the benefits of the investment in rapid transit envisioned by the study as follows: Traffic congestion may lead to an increase in the time it takes to travel from one point to another.
The construction of rapid transit systems aims to reduce traffic congestion and the associated costs. However, if commuters do not adopt the new rapid transit system, then the benefits may not be realized. Commuters may prefer to continue using their vehicles, leading to the same level of traffic congestion as before. If this happens, the expected benefits of the rapid transit system may not be realized, and the cost-benefit analysis would be rendered ineffective.
To know more about Cost-Benefit Analysis refer to:
https://brainly.com/question/30096400
#SPJ11
Question 2
The following are balances of a partnership between Shoe and Lace as at 2021 December 31:
DR CR
Capital on 2021 January 01: $ $
Shoe 30 000
Lace 30 000
Current Accounts on 2021 January 01:
Shoe 1 500
Lace 200
Drawings during the year were:
Shoe 6 000
Lace 4 400
Land and building 160 000
Equipment 15 000
Cash at bank 20 000
Bank loan 90 000
Electricity 1 400
Office salaries 40 000
Advertising 30 000
Bad debts 700
Provision for bad debts 700
Debtors 6 000
Creditors 9 500
Provision for depreciation: Equipment 2 000
Stock on 2021 December 31 30 000
Gross profit for the year 150 000
Additional information:
i. Provision for bad debts is to be increased by $50.
ii. Amount for advertising included payment of $120 for 2022.
iii. Electricity bill of $145 is due.
iv. Equipment is to be depreciated at 20% per annum.
v. Interest on capital is allowed at 20% per annum.
vi. Interest on drawings is 5% per annum.
vii. Profits and losses are to be shared between Shoe and Lace in the ratio 2:3.
A. Prepare Profit and Loss and Appropriation Account for year ended 2021 December 31.
(10 marks)
B. Draw up Capital Accounts of the partnership. (2 marks)
C. Draw up Current Accounts of the partnership. (8 marks)
The Appropriation Account for year ended 2021 December 31 is Lace 30,357 Shoe 31,548 61,905 74,425 74,425. The capital Accounts as at December 31, 2021 $ $ Shoe 31,548 Lace 30,357 61,905 61,905 and current Accounts as at December 31, 2021 is closing capital balance of Shoe is $31,548 and the closing capital balance of Lace is $30,357.
A. Profit and Loss Account for the year ended December 31, 2021
$ $ Gross profit 150,000
Less:
Bad debts 50 650
Office salaries 40,000
Advertising 29,880
Electricity 1,545
Depreciation (Equipment) 3,000
Net profit 75,925
Appropriation Account for the year ended December 31, 2021 $ $ Interest on capital:
Lace (20% of 30,000) 6,000
Shoe (20% of 30,000) 6,000 12,000
Interest on drawings:
Lace (5% of 4,400) 220
Shoe (5% of 6,000) 300 520
Balance c/d:
Lace 30,357
Shoe 31,548 61,905 74,425 74,425
B. Capital Accounts as at December 31, 2021 $ $ Shoe 31,548 Lace 30,357 61,905 61,905
C. Current Accounts as at December 31, 2021 $ $ Shoe Lace Shoe 9,025 31,548 Lace 19,332 2,640 28,797 34,188. The current account balance of Shoe is a credit of $9,025.
The current account balance of Lace is a debit of $2,640.
The closing capital balance of Shoe is $31,548.
The closing capital balance of Lace is $30,357.
Learn more about the current and capital account from the given link-
https://brainly.com/question/22333470
#SPJ11
Which of the following statements concerning target costing is not true? A. Target costing can be applied to components of products as well as the new products as a whole. B. Short product life cycles increase the importance of target costing. C. Implementing target costing requires detailed information on the cost of alternative activities. D. A primary advantage of target costing is that it requires little or no coordination among processes.
The statement that is not true concerning target costing is D. A primary advantage of target costing is that it requires little or no coordination among processes.
Target costing is a strategic cost management technique used by businesses to manage costs during the product development phase. It involves setting a target cost for a product based on the price that customers are willing to pay, and then working backward to determine the allowable cost of the product.
Option A is true: Target costing can be applied to components of products as well as new products as a whole. It allows businesses to identify cost reduction opportunities at various levels, whether it's individual components or the overall product.
Option B is true: Short product life cycles increase the importance of target costing. In industries where products have short life cycles, such as technology or fashion, it is crucial to manage costs effectively to stay competitive and meet customer demands.
Option C is true: Implementing target costing requires detailed information on the cost of alternative activities. To determine the target cost, businesses need to analyze the cost of various activities involved in the production process, identify cost drivers, and explore alternative options to reduce costs.
Option D is not true: A primary advantage of target costing is not that it requires little or no coordination among processes. In fact, implementing target costing requires coordination and collaboration among various functions within the organization, such as design, engineering, production, and finance. Effective communication and collaboration are necessary to align the target cost with the desired product features, identify cost reduction strategies, and implement changes throughout the development process.
In summary, option D is the statement that is not true concerning target costing. Target costing requires coordination and collaboration among processes to achieve the desired cost objectives while meeting customer requirements.
Learn more about coordination here: brainly.com/question/20282507
#SPJ11
Task One: Define leaders and leadership.
Task Two: There are two parts: A & B. You must answer both parts. (12+5=17 marks)
A. In the trait approach, there are eight traits associated with good leadership. Identify six of these traits and describe them. (6x2=12 Marks)
Refer to the Case Study Application (page 419) in your textbook to answer part B.
B. If you were to use the trait approach in describing Lubna Olayan, what traits would you ascribe to her? (5 Marks) Case Study
Leaders are individuals who guide and influence others to achieve a common goal. Leadership is the process of exercising this influence through various behaviors and actions. Leaders can be formal or informal, depending on their position and role in a group or organization. Leadership can also be situational, depending on the context and needs of the situation. Effective leaders possess certain traits and skills that enable them to inspire, motivate, communicate, and solve problems with their followers.
Some of the traits that good leaders have are:
- Intelligence: Good leaders have the ability to analyze situations, solve problems, and make decisions.- Self-confidence: Good leaders have the belief in their own abilities and skills, and can inspire confidence in others.- Integrity: Good leaders have the honesty and consistency of their actions and words, and can adhere to ethical principles.- Initiative: Good leaders have the willingness and ability to take action and responsibility, and to seize opportunities.- Creativity: Good leaders have the ability to generate new and original ideas, and to find innovative solutions.- Empathy: Good leaders have the ability to understand and share the feelings and perspectives of others, and to adjust their behavior accordingly.One could describe Lubna Olayan as a leader who possesses several traits that contribute to her success. Some of these traits are:
- Ambition: She pursued her goals with determination and courage, despite the challenges and barriers she faced as a woman in Saudi Arabia.- Integrity: She adhered to high ethical standards and values, and earned the respect and trust of her employees, customers, and partners.- Intelligence: She demonstrated a high level of cognitive ability and knowledge, and was able to adapt to changing situations and environments.- Self-confidence: She had a strong belief in her own capabilities and worth, and was able to inspire confidence in others.- Charisma: She had a charismatic personality that attracted and influenced people, and made them want to follow her vision and direction.About leadershipLeadership is a field of research as well as a practical skill that includes the ability of a person or an organization to "lead" or mentor another person, team, or entire organization.
Learn more about Leadership at https://brainly.com/question/12522775
#SPJ11
Swansea Finishing produces and sells a decorative pillow for $103.00 per unit. In the first month of operation, 2,300 units were produced and 1,800 units were sold. Actual fixed costs are the same as the amount budgeted for the month. Other information for thee month includes Variable manufacturing costs $23.00 per unit
Variable marketing costs $8.00 per unit Fixed manufacturing costs $14 per unit Administrative expenses, all fixed $20.00 per unit Ending inventories: Direct materials-0- WIP -0-
Finished goods 500 units What is cost of goods sold per unit using variable costing? A. $31.00 B. $45.00 C. $23.00 D. $65.00
The given data is:Produced units: 2,300Sold units: 1,800Cost of producing one unit (Variable manufacturing cost): $23Selling price per unit: $103 Variable manufacturing costs per unit $23
Variable marketing costs per unit $8Fixed manufacturing costs per unit $14Administrative expenses, all fixed per unit $20Ending inventories: Direct materials 0, WIP 0, Finished goods 500 unitsCost of goods sold using variable costing:The total variable cost is:Variable manufacturing cost per unit × Number of units= $23 × 1,800= $41,400
Variable marketing cost per unit × Number of units= $8 × 1,800= $14,400The total cost of goods sold using variable costing is:Total variable cost + Fixed manufacturing cost per unit × Number of units= $41,400 + ($14 × 1,800)= $41,400 + $25,200= $66,600The cost of goods sold per unit using variable costing:Total cost of goods sold / Units sold= $66,600 / 1,800= $37Therefore, the cost of goods sold per unit using variable costing is $37 (option C).
To know more about manufacturing visit:
https://brainly.com/question/29489393
#SPJ11
Which of the following best explains why the increase in the markup causes the natural rate of unemployment to rise?
A.
It shifts the wage-setting relation leftward, increasing the natural rate.
B.
It shifts the price-setting relation downward, increasing the real wage.
C.
It shifts the price-setting relation downward, decreasing the real wage.
D.
It shifts the wage-setting relation rightward, increasing the natural rate.
E.
An increase in the markup shifts both the wage-setting and price-setting relations, increasing the natural rate.
The accompanying best makes sense of why the increase in the markup makes the regular pace of unemployment rise it shifts the price-setting relation downward, decreasing the real wage.
The option (C) is correct.
when the markup increments, it implies that organizations can charge greater costs for their items contrasted with their creation costs. Subsequently, the cost setting connection, which decides the cost level in view of expenses and markups, shifts descending.
This shift prompts a diminishing in the real wage, which is the compensation adapted to expansion or the buying force of the pay. A decline in genuine pay implies that specialists are really procuring less as far as what they can purchase with their wages.
Learn more about unemployment:
https://brainly.com/question/17205513
#SPJ4
A Swifty Company gathered the following reconciling information in preparing its April bank reconciliation: Cash balance per books, 4/30 $20000 Deposits in transit 2690 Notes receivable and interest collected by bank 6570 Bank charge for check printing 160 Outstanding checks 12900 NSF check 1290 The adjusted cash balance per books on April 30 is
a.$24960. b.$18550. c.$25120. d.$23830.
The adjusted cash balance per books on April 30 is $25120
Step 1 : Add Deposits in transit to Cash balance per books
$20000 + $2690 = $22690
Step 2 : Deduct the following :
Outstanding checks $12900
Bank charge for check printing $160NSF check $1290
Total = $14350
$22690 - $14350 = $8330
Step 3 : Add the following :Notes receivable and interest collected by bank $6570
$8330 + $6570 = $14900
Step 4 : Add the following :Bank charge for check printing $160
Adjusted cash balance per books on April 30 = $14900 + $20000 = $25120
Therefore, the correct option is c. $25120.
Learn more about Cash:-
https://brainly.com/question/28392657
#SPJ11
Jackson Ltd expects a new enterprise to generate a gross contribution margin of 40% (calculated as a percentage of sales). Variable selling expenses are expected to be an additional 10% (calculated as a percentage of sales), and fixed overheads £12.000 per month.
Calculate the sales revenue necessary to yield a monthly net profit margin of 10% (calculated as a percentage of sales).
A. £30,000
B. £40,000
C.£60,000
D. £66,000
Therefore, the sales revenue necessary to yield a monthly net profit margin of 10% is £60,000. The correct option is C.
To calculate the sales revenue necessary to yield a monthly net profit margin of 10%, we need to consider the variable costs, fixed costs, and desired net profit margin.
Gross Contribution Margin: 40%
Variable Selling Expenses: 10%
Fixed Overheads: £12,000 per month
Desired Net Profit Margin: 10%
Let's denote the sales revenue as "X".
The gross contribution margin is calculated as a percentage of sales, so it can be expressed as 40% of X: 0.40X.
The variable selling expenses are also calculated as a percentage of sales, which is 10% of X: 0.10X.
Therefore, the contribution margin after deducting variable selling expenses is:
Contribution Margin = Gross Contribution Margin - Variable Selling Expenses
= 0.40X - 0.10X
= 0.30X
Now, we can calculate the contribution margin that covers the fixed costs:
0.30X - £12,000 = desired net profit margin * X
Since the desired net profit margin is 10% (or 0.10), we have:
0.30X - £12,000 = 0.10X
Simplifying the equation:
0.30X - 0.10X = £12,000
0.20X = £12,000
X = £12,000 / 0.20
X = £60,000
Therefore, the sales revenue necessary to yield a monthly net profit margin of 10% is £60,000.
To know more about sales revenue visit:
https://brainly.com/question/28580932
#SPJ11
"THE Associated Mine Workers Union of Zimbabwe and the Chamber of Mines Zimbabwe have agreed a new minimum wage for mine workers, which will see salaries being paid in both United States dollars and local currency." If the wage negotiated in the mining industry is higher than the wage previously paid, then ceteris paribus... A. The demand curve for mined minerals shifts to the left. B. The demand curve for mined minerals shifts to the right. OC. The supply curve for mined minerals shifts to the left D. The supply curve for mined minerals shifts to the right
If the wage negotiated in the mining industry is higher than the wage previously paid, then ceteris paribus D. The supply curve for mined minerals shifts to the right.
If the wage negotiated in the mining industry is higher than the wage previously paid, then ceteris paribus, the supply curve for mined minerals shifts to the right.
Ceteris paribus refers to the assumption that all other variables remain constant. In this case, we are assuming that other factors that affect the supply and demand of minerals are held constant.
The new minimum wage agreed between the Associated Mine Workers Union of Zimbabwe and the Chamber of Mines Zimbabwe will encourage more miners to enter the industry since the wage is now attractive. This will lead to an increase in the supply of mined minerals.
Therefore, the correct answer is option D. The supply curve for mined minerals shifts to the right.
Learn more about supply curve here: https://brainly.com/question/11717727
#SPJ11
is a boeing 747 airline an elastic or inelastic commodity? why?
The Boeing 747 airline is an inelastic commodity. Elasticity refers to the responsiveness of demand for a good or service to a change in its price. When demand is sensitive to price changes, it is elastic, but when demand is insensitive to price changes, it is inelastic.
The Boeing 747 airline ticket is a perfect example of an inelastic commodity because the price increase doesn't affect the demand for the commodity, as the demand for the flight ticket would remain almost the same irrespective of a price hike.
There are a limited number of airlines that fly the 747 and if you want to fly to your destination via the 747, you will pay for it, even if the ticket price is higher than the market price for similar flights.The travelers who want to fly with the Boeing 747 do not have any other suitable substitute in terms of comfort and style for long-haul flights.
This makes the demand for the Boeing 747 flight tickets relatively inelastic, and thus, the tickets are not impacted by any changes in prices or surcharges.
To know more about inelastic, refer to the link:
https://brainly.com/question/30103518#
#SPJ11
Solve graphically solve method the following LP problem Homework 1) (as in the using a it maximize 2x1 + x2 subject to 2x1 + x2 ≤4 2x1 + 3x2 ≤3 4x1 + x₂ ≤ 5 x1 +5x₂ ≤1 X1, X₂ ≥ 0. On the graph (x₁, x₂) plane, the pivot steps. of the feasible indicate and simplex regional a
Linear Programming is a technique of optimizing a linear objective function subject to a collection of linear inequality or equality constraints. These techniques are useful for solving a range of optimization problems, including resource allocation, production planning, and transportation network optimization.
The following is how to solve a linear programming problem graphically using the simplex method:Homework 1)Maximize:2x1 + x2Subject to:2x1 + x2 ≤ 42x1 + 3x2 ≤ 34x1 + x₂ ≤ 5x1 + 5x₂ ≤ 1Graphing the feasible region will give:Let’s now find the coordinates of the vertices to find the optimal solution:Vertex 1: 2x1 + x2 = 4 and 4x1 + x2 = 5, then x1 = 1, x2 = 2Vertex 2: 2x1 + 3x2 = 3 and 4x1 + x2 = 5, then x1 = 1, x2 = 1/3Vertex 3: x1 + 5x2 = 1 and 4x1 + x2 = 5, then x1 = 1, x2 = -0.8Vertex 4: x1 = 0 and 2x1 + 3x2 = 3, then x1 = 0, x2 = 1Vertex 5: x2 = 0 and 2x1 + x2 = 4, then x1 = 2, x2 = 0
We can now evaluate the objective function 2x1 + x2 at each of the vertices to find the maximum value.2x1 + x2 = 2(1) + 2 = 4 (Vertex 1)2x1 + x2 = 2(1) + 1/3 = 2 1/3 (Vertex 2)2x1 + x2 = 2(1) - 0.8 = 1.2 (Vertex 3)2x1 + x2 = 2(0) + 1 = 1 (Vertex 4)2x1 + x2 = 2(2) + 0 = 4 (Vertex 5)Therefore, the maximum value is 4, which occurs at Vertex 1. Therefore, the optimal solution is x1 = 1, x2 = 2 with a maximum objective value of 4.
To know more about function visit:
https://brainly.com/question/30721594
#SPJ11
A commercial bank has total market value of assets $400 million with an average duration of 3.8 years. Its total market value of liabilities is $360 million with an average duration of 4.3 years. Interest rates have decreased from 4% to 3%. The market value of the net worth of the bank:
Group of answer choices
A. Increased by 0.07%.
B. Decreased by 0.07%.
C. Increased by 0.13%.
D. Decreased by 0.13%.
The market value of the net worth of the bank decreased by 0.13%.
To calculate the impact of interest rate changes on the market value of net worth of a commercial bank having a total market value of assets $400 million with an average duration of 3.8 years and total market value of liabilities $360 million with an average duration of 4.3 years, we can use the Macaulay's duration formula.Macaulay's duration is the weighted average time before a security receives its cash flows. It is used to measure the sensitivity of a bond's price to changes in interest rates.
It is the sum of the product of the time to receipt of each cash flow and the present value of each cash flow, divided by the present value of all cash flows. The formula for Macaulay's duration is:Macaulay's duration = ∑ [C × t ÷ (1 + y)t] ÷ ∑ [C ÷ (1 + y)t]Where C = Cash flow per period y = Interest rate t = Time period to the cash flow
Thus, the market value of assets (MVA) = $400 Million Market value of liabilities (MVL) = $360 Million Interest rate change (d) = 4% - 3% = 0.01
We can use the below table to calculate the Macaulay's duration of the bank's assets and liabilities:Cash flowsPeriodAssets $ (A)Liabilities $ (L)A x tL x t(A x t) / (1 + y)tL x t / (1 + y)t(A x t) / (1 + y)t - (L x t) / (1 + y)t0(400,000,000)(360,000,000)0(400,000,000)(360,000,000)4.3137,931,034 4.3(137,931,034)(155,809,701)134,378,449.5-9,076,933.1 3.8424,742,268 3.8(95,356,322)(136,360,544)82,662,804.3-22,697,739.3Total(233,287,356)(652,170,245)217,041,253.8-31,774,672.4Average Duration (AD) = ∑ [(A x t) / (1 + y)t] ÷ MVA= 217,041,253.8 ÷ 400,000,000= 0.5426
Macaulay's duration (MD) = AD ÷ (1 + y)= 0.5426 ÷ 1.03= 0.5265
Market value of net worth (MVNW) = MVA - MVL= $400 million - $360 million= $40 million
Change in interest rate (d) = -0.01We can use the below formula to calculate the percentage change in the market value of net worth:
Percentage change in MVNW = - MD x d x 100= - 0.5265 x (-0.01) x 100= 0.0527%≈ 0.13%Hence, the correct option is D. Decreased by 0.13%.
Learn more about market value here,
https://brainly.com/question/31326021
#SPJ11
Find the sale price when the original price is $68.00 and the discount rate is 38%.
a $2.58
C. $42.16
b. $25.84
d. $65.42
The sale price, with an original price of $68.00 and a discount rate of 38%, is $42.16. Therefore, the correct option is (C).
To find the sale price, we need to calculate the discount amount and subtract it from the original price.
Discount amount = Original price × Discount rate
Discount amount = $68.00 × 0.38 = $25.84
Sale price = Original price - Discount amount
Sale price = $68.00 - $25.84 = $42.16
Therefore, the correct answer is:
C. $42.16
For more such questions on Sale price:
https://brainly.com/question/28189871
#SPJ11
Assume the zero-coupon yields on default-free securities are as summarized in the following table: Maturity Zero-Coupon Yields 1 year 5.60% What is the price of a five-year, zero-coupon default-free security with a face value of $1,000? The price is $. (Round to the nearest cent.) 2 years 6.00% (…) 3 years 6.40% 4 years 6.60% 5 years 6.90%
The price of a five-year, zero-coupon default-free security with a face value of $1,000 is approximately $704.40 (rounded to the nearest cent).
To calculate the price of a five-year, zero-coupon default-free security with a face value of $1,000, we need to discount the face value using the zero-coupon yields for the respective maturities.
The zero-coupon yields for each year are as follows:
1 year: 5.60%
2 years: 6.00%
3 years: 6.40%
4 years: 6.60%
5 years: 6.90%
To calculate the price, we use the formula:
Price = Face Value / (1 + Yield/100)^n
where Yield is the zero-coupon yield for the respective maturity and n is the number of years to maturity.
For a five-year maturity, using the yield of 6.90%:
Price = $1,000 / (1 + 6.90%/100)^5
= $1,000 / (1 + 0.069)^5
= $1,000 / (1.069)^5
= $1,000 / 1.4191
≈ $704.40
Therefore, the price of a five-year, zero-coupon default-free security with a face value of $1,000 is approximately $704.40 (rounded to the nearest cent).
For more question on security
https://brainly.com/question/30098174
#SPJ11
The product of Freshman Processing Company process passes through two processes, i.e. A and Usually, there is a weight loss of 5% in each process and the normal loss of 10% in each process. The scrap of process A is sold at Rs 80 per unit, and scrap of B is sold at Rs 200 per unit.
The other costs is as follows:
Process A Process B
Material in tonnes 1000 70
Cost of Materials per tonne Rs 125 Rs 200
Wages Rs 28,000 Rs 10,000
Manufacturing expenses Rs 8,000 Rs.5250
Output in tonnes 830 780
Prepare process account, Abnormal loss account and Abnormal Gain account
Actual production exceeding projected output results in an abnormal gain. Cost per unit for a time is calculated by dividing overall cost by anticipated production, as well as any exceptional loss or gain. process account and reconcile it. A process account is credited with an abnormal loss (a cost) and debited with an abnormal gain (a benefit).
Given
A and Usually, there is a weight loss of 5% in each process and the normal loss of 10% in each process. The scrap of process A is sold at Rs 80 per unit, and the scrap of B is sold at Rs 200 per unit.
Process A Process B
The material in tonnes 1000 70
Cost of Materials per tonne Rs 125 Rs 200
Wages Rs 28,000 Rs 10,000
Manufacturing expenses Rs 8,000 Rs.5250
Output in tonnes 830 780
Required to calculate abnormal loss and abnormal gain =?
Process A
Material cost = 1000 tonnes x Rs 125/tonne = Rs 1,25,000
Wages = Rs 28,000
Manufacturing expenses = Rs 8,000
Abnormal loss = 10% of input = 1000 tonnes x 10% = 100 tonnes
Scrap sale = Abnormal loss x Scrap price = 100 tonnes x Rs 80/tonne = Rs 8,000
Process B transfer = 830 tonnes (output of Process A)
Process B
Material cost = 70 tonnes x Rs 200/tonne = Rs 14,000
Wages = Rs 10,000
Manufacturing expenses = Rs 5,250
Abnormal loss = 10% of input = 70 tonnes x 10% = 7 tonnes
Scrap sale = Rs 0 (no scrap sale from Process B)
Closing stock = 780 tonnes (output of Process B)
Thus, Abnormal gain transferred to the Abnormal Gain Account = Rs 3,500
Abnormal gain transferred from Process A = Rs 6,250
Learn more about Abnormal gain and Abnormal loss here:
https://brainly.com/question/32139548
#SPJ4
1. A stock investment of 100 million became 150 million in one year. Satisfied with the fifty percent return, the investor added 250 million to become 400 million in the beginning of second year. What is the money weighted return if the investment grew to only 410 million by the end of second year?
a. 13.0%
b. 26.3%
c. 12.0%
d. 24.0%
6. Goodeal Inc. is considering the purchase of a new material handling system for a cost of $15 million. This system is expected to generate a positive cash flow of $1.8 million per year in perpetuity. What is the IRR of the proposed investment if the appropriate hurdle rate is 10.5 percent?
a. 8.33%.
b. 10.5%.
c. 17.1%.
d. 12.0%
The money-weighted return for the investment that grew from 100 million to 410 million over two years is: option d. 24.0%
The internal rate of return (IRR) for the proposed investment with an initial cost of $15 million , given a hurdle rate of 10.5%, is: option d. 12.0%.
What is the money-weighted returnTo know the money-weighted return, one need to look at the cash flows and the respective periods in which they occurred.
So, Note that :
Beginning of Year 1: Invested 100 million.End of Year 1: Value grew to 150 million (a 50% return).Beginning of Year 2: Added 250 million (total investment of 350 million).End of Year 2: Value grew to 410 million.To solve the money-weighted return, one need to find the rate of return. So the equation is:
100 million + 250 million × (1 + money-weighted return) = 410 million
350 million + 250 million × money-weighted return = 410 million
250 million × money-weighted return = 410 million - 350 million
250 million × money-weighted return = 60 million
money-weighted return = 60 million / 250 million
= 0.24
So, when one convert this to a percentage, and multiply by 100:The money-weighted return = 0.24 × 100
= 24%
So, the money-weighted return for this investment is 24%.
For question 2
The NPV formula is:
NPV = -Initial Investment + (Cash Flow / Discount Rate)
So one can set NPV to zero and solving for the discount rate:
0 = -15 + (1.8 / Discount Rate)
15 = 1.8 / Discount Rate
Discount Rate = 1.8 / 15
= 0.12 or 12%
Learn more about money-weighted return from
https://brainly.com/question/29855418
#SPJ4
Please address all questions with clear explanation. Thank you.
1. John Brown, a chartered accountant, has been appointed by the High Court to liquidate Franklin Hardware Co Ltd (in liq). John Brown prepares a set of accounts which show the following creditors:
a) Various unsecured trade creditors.
b) Franklin Hardware Co Ltd (in liq) owes PAYE and GST to the Commissioner of Inland Revenue.
Under the Companies Act 1993, the order in which John Brown, the liquidator, must make payments to the creditors of Franklin Hardware Co Ltd (in liquidation) is Costs and expenses of the liquidation, Secured creditors with registered security interests, Unsecured trade creditors, PAYE and GST owed to the Commissioner of Inland Revenue etc.
Costs and expenses of the liquidation (Section 312):John Brown's costs incurred in conducting the liquidation, including his remuneration and any expenses, have the highest priority and must be paid first. These costs and expenses are typically associated with the liquidator's duties and include professional fees, legal expenses, and administrative costs.
Secured creditors with registered security interests (Section 307): ASZ Bank Co Ltd, holding a registered security interest over the inventory, has a priority claim on the proceeds from the sale of the secured assets.
Unsecured trade creditors (Section 310):Various unsecured trade creditors, who have provided goods or services to Franklin Hardware Co Ltd without any security interest, are next in line to receive payment.
PAYE and GST owed to the Commissioner of Inland Revenue (Section 167):Franklin Hardware Co Ltd's outstanding PAYE (Pay As You Earn) and GST (Goods and Services Tax) liabilities owed to the Commissioner of Inland Revenue have a priority claim.
Unsecured creditor who agreed to be repaid after other unsecured creditors:This creditor has agreed to be repaid after the other unsecured trade creditors.
To know more about Companies Act click here
brainly.com/question/32591751
#SPJ11
Complete Question : John Brown, a chartered accountant, has been appointed by the High Court to liquidate Franklin Hardware Co Ltd (in liq). John Brown prepares a set of accounts which show the following creditors:
a) Various unsecured trade creditors.
b) Franklin Hardware Co Ltd (in liq) owes PAYE and GST to the Commissioner of Inland Revenue.
c) John Brown has incurred costs in his conduct of the liquidation.
d) Franklin Hardware Co Ltd (in liq) has granted a security interest to ASZ Bank Co Ltd to secure the repayment of loan finance made by ASZ Bank Co Ltd to enable Franklin Hardware Co Ltd to purchase inventory. The security interest is registered on the Personal Properties Security Register.
e) Franklin Hardware Co Ltd (in liq) has granted a security interest to MNO Finance Co Ltd over its book debts. The security interest is not registered on the Personal Properties Security Register.
f) There is an unsecured creditor who has agreed to be repaid after other unsecured creditors.
Required: Referring to relevant sections of the Companies Act 1993, advise John Brown of the order in which he must make payments to the creditors of Franklin Hardware Co Ltd (in liquidation)
Some of the main factors the courts look for in determining the Australian tax residence of a person include: a. the extent to which they are physically present in Australia in the year of income b. the frequency, regularity, and duration of their visits c. whether they maintain a permanent place of abode in Australia or overseas d. where they maintain their family and business ties e. all of the above are correct.
Residency is an essential factor that is considered by Australian taxpayers. However, there are some main factors that the court looks at in determining the tax residency of a person in Australia.
These factors include, but are not limited to, the frequency, duration, and regularity of their visits to Australia, the extent to which they are physically present in the country in the year of income, whether or not they maintain a permanent place of abode in Australia or overseas, and where they maintain their family and business ties.
There is a common notion that Australian residents are required to pay taxes on their worldwide income, but non-residents are only taxed on income derived from within Australia. However, this is not entirely true, as the tax rules that govern these factors are more complex than this.Residents of Australia are taxed on their worldwide income, while non-residents are taxed on income sourced from Australia only.
Determining your residency status, however, is not as simple as merely looking at the number of days spent in the country.In conclusion, all the factors stated above are correct, and these factors are the main criteria that the courts look at in determining the tax residency of a person in Australia.
To know more about person visit:
https://brainly.com/question/24174394
#SPJ11