Reaction 3 produced O2 2.37 times faster than Reaction 1 produced H2O. (a) The variable that is different (or changed) between Reactions 1 and 3 is the concentration of hydrogen peroxide ([H2O2]).
(b) Reaction 3 produced O2 faster than Reaction 1 produced H2O.
(c) The ratio of the rates of these two experiments can be calculated using the equation:
rate = Δ[H2O]/Δt (or Δ[O2]/Δt)
The data provided for Reactions 1 and 3 are:
Reaction 1:
[H2O2] = 0.01 M
Δ[H2O] = 1.04 x 10^-4 M
Δt = 60 s
Reaction 3:
[H2O2] = 0.02 M
Δ[O2] = 1.23 x 10^-4 M
Δt = 30 s
To calculate the rates, we need to divide the change in concentration by the time:
rate1 = Δ[H2O]/Δt = (1.04 x 10^-4 M) / (60 s) = 1.73 x 10^-6 M/s
rate3 = Δ[O2]/Δt = (1.23 x 10^-4 M) / (30 s) = 4.10 x 10^-6 M/s
The ratio of the rates is:
rate3 / rate1 = (4.10 x 10^-6 M/s) / (1.73 x 10^-6 M/s) = 2.37
Therefore, Reaction 3 produced O2 2.37 times faster than Reaction 1 produced H2O.
Learn more about Reaction here:
https://brainly.com/question/28984750
#SPJ11
Calculate the volume of 0.5 M sodium phosphate needed to react with Cu(NO3)2 (aq) in a Copper Cycle that starts with 0.636 grams of Cu(s).
[tex]Cu(NO_{3} )_{2}[/tex]Calculate the volume of 0.5 M sodium phosphate needed to react with [tex]Cu(NO_{3} )_{2}[/tex] (aq) in a Copper Cycle that starts with 0.636 grams of Cu(s).
To exercise session the extent of 0.Five sodium phosphate anticipated to reply with [tex]Cu(NO_{3} )_{2}[/tex] (aq) in a Copper Cycle, we need to first of all training session the honest compound circumstance for the reaction.
Cu + 2[tex]NO_{3}[/tex]+ 2[tex]Na^{++}[/tex] HPO42-→ [tex]CuHPO_{4}[/tex]↓ + 2[tex]Na^{+}[/tex] + 2[tex]NO_{3} ^{-}[/tex]
This condition indicates that one mole of Cu responds with one mole of sodium phosphate to border one mole of copper (II) hydrogen phosphate, which inspires out of association. Hence, we actually need to workout the amount of moles of Cu in 0.636 grams of Cu(s) to decide how a great deal sodium phosphate required.
The molar mass of Cu is sixty three.55 g/mol, so the amount of moles of Cu in zero.636 grams may be decided as follows:
moles of Cu = mass of Cu/molar mass of Cu
moles of Cu = 0.636 g/sixty three.Fifty five g/mol
moles of Cu = zero.01 mol
Consequently, we are able to require zero.01 moles of sodium phosphate to reply with the copper on this response. Since the grouping of the sodium phosphate is given as zero.5 M, we can utilize the accompanying recipe to compute the extent of sodium phosphate required:
moles of solute = fixation x quantity (in liters)
adjusting the equation we get
volume (in liters) = moles of solute/fixation
subbing the qualities we get
volume (in liters) = zero.01 mol/0.5 M
extent (in liters) = 0.02 L or 20 mL
Subsequently, we can require 20 mL of zero.Five M sodium phosphate to reply with the zero.636 grams of Cu(s) in the Copper Cycle.
To learn more about Copper, refer:
https://brainly.com/question/28773927
#SPJ4
For a one step reaction, the activation energy for the forward reaction is 40.0 kJ mol-1, and the enthalpy of reaction is -20.0 kJ mol-1. Calculate the activation energy for the reverse reaction.
The activation energy for the reverse reaction is 60.0 kJ/mol.
To calculate the activation energy for the reverse reaction, we'll need to use the activation energy of the forward reaction and the enthalpy of the reaction. Here are the steps:
1. Recall the relationship between activation energy, enthalpy, and reverse reaction activation energy: activation energy of reverse reaction = activation energy of forward reaction - enthalpy of reaction
2. Insert the given values into the equation:
Activation energy of reverse reaction = 40.0 kJ/mol (forward reaction) - (-20.0 kJ/mol) (enthalpy)
3. Simplify the equation:
Activation energy of reverse reaction = 40.0 kJ/mol + 20.0 kJ/mol
4. Calculate the activation energy of the reverse reaction:
Activation energy of reverse reaction = 60.0 kJ/mol
learn more about activation energy refer: https://brainly.com/question/28384644
#SPJ11
A sample of N2 gas is stored in a rigid 2.5 L container at 25°C and 1.0 atm. How many moles of nitrogen gas are present in the container? 0.10 moles 1.2 moles 9.8 moles 0.51 moles r=0.08206 L*atm/mol*K
WILL MARK BRAINLIEST
We can use the ideal gas law to determine the number of moles of nitrogen gas present in the container:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
We are given that the container is rigid, which means its volume is constant. We can also assume that nitrogen gas behaves ideally at these conditions.
Substituting the given values into the ideal gas law, we get:
n = PV/RT
where P = 1.0 atm, V = 2.5 L, T = 25°C + 273.15 = 298.15 K, and R = 0.08206 L·atm/(mol·K).
Plugging in these values:
n = (1.0 atm) x (2.5 L) / (0.08206 L·atm/(mol·K) x (298.15 K))
n = 0.102 moles
Therefore, there are approximately 0.10 moles of nitrogen gas present in the container.
to increase the volume of a fixed amount of gas from 100ml to 200ml
1) reduce temp from 400K to 200K at constant pressure
2) increase pressure from 1.00 atm to 2.00 atm at constant pressure
3) increase temp from 25 defree C to 50 degree C at constant pressure
By increasing the temperature from 25°C to 50°C at constant pressure, the volume of the gas will increase from 100ml to approximately 200ml.
To increase the volume of a fixed amount of gas from 100ml to 200ml, you should follow the third option: 3) Increase the temperature from 25°C to 50°C at constant pressure.
Here's a step-by-step explanation:
Step 1: Convert the given temperatures to Kelvin.
- 25°C + 273.15 = 298.15K
- 50°C + 273.15 = 323.15K
Step 2: Apply Charles's Law, which states that at constant pressure, the volume of a gas is directly proportional to its temperature.
- V1/T1 = V2/T2
Step 3: Plug in the given values and solve for the new volume (V2).
- (100ml / 298.15K) = (V2 / 323.15K)
Step 4: Solve for V2.
- V2 = (100ml / 298.15K) * 323.15K
- V2 ≈ 200ml
To learn more about temperature click here https://brainly.com/question/29072206
#SPJ11
By increasing the temperature from 25°C to 50°C at constant pressure, the volume of the gas will increase from 100ml to approximately 200ml.
To increase the volume of a fixed amount of gas from 100ml to 200ml, you should follow the third option: 3) Increase the temperature from 25°C to 50°C at constant pressure.
Here's a step-by-step explanation:
Step 1: Convert the given temperatures to Kelvin.
- 25°C + 273.15 = 298.15K
- 50°C + 273.15 = 323.15K
Step 2: Apply Charles's Law, which states that at constant pressure, the volume of a gas is directly proportional to its temperature.
- V1/T1 = V2/T2
Step 3: Plug in the given values and solve for the new volume (V2).
- (100ml / 298.15K) = (V2 / 323.15K)
Step 4: Solve for V2.
- V2 = (100ml / 298.15K) * 323.15K
- V2 ≈ 200ml
To learn more about temperature click here https://brainly.com/question/29072206
#SPJ11
ou have added all reagents for the Diels Alder lab and brought the solution to a reflux. However, some of the compounds remain undissolved. What should you do? O Add more xylene to help things dissolve Discard the chemicals and start over Move foward with the reaction
If some of the compounds remain undissolved after adding all reagents for the Diels Alder lab and bringing the solution to a reflux, you should add more xylene to help things dissolve.
It is important to ensure that all the compounds are dissolved before moving forward with the reaction.
Discarding the chemicals and starting over is not necessary unless the compounds cannot be dissolved even after adding more xylene.
Moving forward with the reaction without dissolving all the compounds can lead to incomplete reaction and inaccurate results.
To know more about Diels Alder, refer here:
https://brainly.com/question/30751490#
#SPJ11
If some of the compounds remain undissolved after adding all reagents for the Diels Alder lab and bringing the solution to a reflux, you should add more xylene to help things dissolve.
It is important to ensure that all the compounds are dissolved before moving forward with the reaction.
Discarding the chemicals and starting over is not necessary unless the compounds cannot be dissolved even after adding more xylene.
Moving forward with the reaction without dissolving all the compounds can lead to incomplete reaction and inaccurate results.
To know more about Diels Alder, refer here:
https://brainly.com/question/30751490#
#SPJ11
Sulfuric acid reacts with a vanadium oxide compound according to the following unbalanced reaction. What are the coefficients in the balanced chemical equation in the order in which it is written?
H2SO4(aq) + V203 → V2(S04)3 + H20(1)
The balanced chemical equation for this reaction is therefore 2H₂SO₄(aq) + V₂0₃ → V₂(S0₄)₃ + 3H₂0.
This equation shows that two molecules of sulfuric acid are required for every one molecule of vanadium oxide in order to form one molecule of vanadium sulfate and three molecules of water.
Sulfuric acid is a powerful oxidizing agent, and when it reacts with a vanadium oxide compound, the reaction produces vanadium sulfate and water. The unbalanced chemical equation for this reaction is H₂SO₄(aq) + V₂0₃ → V₂(S0₄)₃ + H₂0.
To balance this equation, the coefficients must be adjusted so that the number of atoms of each element on the left side of the equation is equal to the number of atoms of each element on the right side of the equation.
Know more about vanadium here
https://brainly.com/question/14252506#
#SPJ11
Balance each equation by inserting coefficients as needed.
C3H8+O2 ----> CO2+H2O
N2H4------> NH3+N2
The balanced equations by inserting coefficients are C₃H₈ + 5O₂ → 3CO₂ + 4H₂O and N₂H₄ → 2NH₃ + N₂.
The balanced equations are as follows:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
To balance this equation, we need to make sure that the number of atoms of each element is equal on both sides of the equation. To balance the carbon atoms, we need to put a coefficient of 3 in front of CO₂. To balance the hydrogen atoms, we need to put a coefficient of 4 in front of H₂O. Finally, to balance the oxygen atoms, we need to put a coefficient of 5 in front of O₂. Therefore, the balanced equation is:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
The next equation is:
N₂H₄ → 2NH₃ + N₂
To balance this equation, we need to make sure that the number of atoms of each element is equal on both sides of the equation. To balance the nitrogen atoms, we need to put a coefficient of 2 in front of NH₃. To balance the nitrogen atoms on the reactant side, we need to put a coefficient of 1 in front of N₂. Therefore, the balanced equation is:
N₂H₄ → 2NH₃ + N₂
In summary, to balance a chemical equation, we need to follow the law of conservation of mass, which states that the total mass of the reactants must be equal to the total mass of the products.
Know more about balanced equation here:
https://brainly.com/question/7181548
#SPJ11
Calculate the standard change in Gibbs free energy for the following reaction at 25C
3H2(g)+Fe2O3(s) ---> 2Fe(s)+3H2O(g)
delta G (rxn) = ____ kJ
The standard change in Gibbs free energy for the given reaction at 25C is -824.2 kJ/mol.
To calculate the standard change in Gibbs free energy (delta G rxn) for the given reaction at 25C, we need to use the equation: delta G rxn = delta G f(products) - delta G f(reactants), where delta G f is the standard molar Gibbs free energy of formation for each compound involved in the reaction. We can look up these values in a standard thermodynamic data table, such as the NIST Chemistry WebBook.
Using the values for delta G f, we get: delta G rxn = [2(-273.2 kJ/mol Fe) + 3(-228.6 kJ/mol H2O(g))] - [3(0 kJ/mol H2) + 1(-824.2 kJ/mol Fe2O3(s))], delta G rxn = -824.2 kJ/mol
Therefore, the standard change in Gibbs free energy for the given reaction at 25C is -824.2 kJ/mol.
To know more about Gibbs free energy, refer here:
https://brainly.com/question/20358734#
#SPJ11
A cleaning soluation had a poh of 4.0, what is the hydronium ion concentration?
The hydronium ion concentration of a cleaning solution with a pOH of 4.0 is 1.0×10⁻¹⁰ M.
The pH and pOH of a solution are related to the hydronium ion (H₃O⁺) and hydroxide ion (OH⁻) concentrations through the equations:
pH = -log[H₃O⁺]
pOH = -log[OH⁻]
Since pH + pOH = 14 at 25°C, we can use these equations to find the hydronium ion concentration:
pOH = 4.0
pH + pOH = 14
pH = 14 - 4.0 = 10.0
[H₃O⁺] = [tex]10^{-PH}[/tex] = [tex]10^{-10}[/tex] = 1.0×[tex]10^{-10}[/tex] M
Therefore, the hydronium ion concentration of the cleaning solution is 1.0×10⁻¹⁰ M, which is a very low concentration of acidic ions. This means that the solution is highly basic, with a pH of 10.0, and is likely to be effective in removing dirt, grime, and stains from surfaces.
The pH and pOH of a solution are important parameters that help us understand the acidity or basicity of the solution. A pH value below 7 indicates that the solution is acidic, while a pH above 7 indicates that the solution is basic. A pH of 7 indicates that the solution is neutral, such as pure water.
Similarly, the pOH value can be used to determine the hydroxide ion concentration, which is related to the basicity of the solution. A pOH value below 7 indicates that the solution is acidic, while a pOH above 7 indicates that the solution is basic. A pOH of 7 indicates that the solution is neutral.
In the case of the cleaning solution mentioned in the question, the pOH value of 4.0 corresponds to a hydroxide ion concentration of 1.0×10⁻⁴ M. This concentration is much lower than the hydronium ion concentration of 1.0×10⁻¹⁰ M, indicating that the solution is highly basic.
learn more about hydronium here:
https://brainly.com/question/2817451
#SPJ11
the ksp of ca(oh)2 is 6.684 × 10–5 at 25 °c. what is the concentration of oh–(aq) in a saturated solution of ca(oh)2(aq)?
The concentration of OH⁻(aq) in a saturated solution of [tex]Ca(OH)_2[/tex](aq) at 25 °C is approximately 0.00289 M.
The Ksp (solubility product constant) of [tex]Ca(OH)_2[/tex] at 25 °C is 6.684 × [tex]10^{-5[/tex]. This means that when Ca(OH)2 dissolves in water, it dissociates into [tex]Ca^{2+[/tex] and 2 OH- ions, and their product of concentrations is equal to Ksp.
Therefore, in a saturated solution of [tex]Ca(OH)_2[/tex](aq), the concentration of [tex]Ca^{2+[/tex] and OH- ions would be equal to the solubility of [tex]Ca(OH)_2[/tex]. Since one mole of [tex]Ca(OH)_2[/tex] produces two moles of OH- ions, the concentration of OH- ions in the saturated solution would be:
[OH-] = 2 x [tex]\sqrt(Ksp)[/tex]
Substituting the given Ksp value into the equation, we get:
[OH-] = 2 x [tex]\sqrt(6.684 * 10^{-5)[/tex] = 0.00289 M
Therefore, the concentration of OH- ions in a saturated solution of [tex]Ca(OH)_2[/tex](aq) at 25 °C is 0.00289 M. This means that the solution is basic since the concentration of OH- ions is greater than the concentration of H+ ions.
For more such questions on Concentration.
https://brainly.com/question/31479718#
#SPJ11
determine ∆s for the phase change of 2.80 moles of water from liquid to solid at 0.0 °c. (∆h = -6.01 kj/mol)
The entropy change for the phase change of 2.80 moles of water from liquid to solid at 0.0 °C is -0.129 kJ/K.
The entropy change for the phase change of water from liquid to solid at 0 °C can be calculated using the following equation:
ΔS = ΔH / T
where ΔH is the enthalpy change, T is the temperature in Kelvin, and ΔS is the entropy change.
Given that the enthalpy change is ΔH = -6.01 kJ/mol, we can calculate the entropy change as follows:
ΔS = (-6.01 kJ/mol) / (273.15 K)
Note that the temperature needs to be in Kelvin, so we added 273.15 to convert 0 °C to Kelvin.
Now, we need to multiply the entropy change by the number of moles of water that undergoes the phase change:
ΔS = (-6.01 kJ/mol) / (273.15 K) * 2.80 mol
ΔS = -0.0462 kJ/(mol K) * 2.80 mol
ΔS = -0.129 kJ/K.
learn more about Phase change here:
https://brainly.com/question/30270780
#SPJ11
you have a 250ml sample of 1.09 molarity acetic acid assuming no volume change how much naoh must be added in order to make the best buffer
6.25 g
12.5 g
16.3 g
21.3 g
none of these
To make the best buffer, we need to add 10.9 g of [tex]NaOH[/tex]. So, none of the option matches the answer therefore, the correct option is none of the these.
To make the best buffer, we need to add an equal amount of a strong base ([tex]NaOH[/tex]) to the weak acid (acetic acid) solution. The balanced equation for the neutralization reaction is:
[tex]CH_3COOH + NaOH - > CH_3COONa + H_2O[/tex]
From the balanced equation, we can see that 1 mole of acetic acid reacts with 1 mole of [tex]NaOH[/tex]. To calculate the amount of [tex]NaOH[/tex] needed, we first need to calculate the number of moles of acetic acid in the sample:
moles of acetic acid = Molarity x Volume (in L)
moles of acetic acid = 1.09 mol/L x 0.250 L
moles of acetic acid = 0.2725 mol
Since we need to add an equal amount of [tex]NaOH[/tex], we need 0.2725 moles of [tex]NaOH[/tex]. The molar mass of [tex]NaOH[/tex] is 40 g/mol, so the mass of [tex]NaOH[/tex] needed is:
mass of [tex]NaOH[/tex]= moles of [tex]NaOH[/tex] x molar mass
mass of [tex]NaOH[/tex] = 0.2725 mol x 40 g/mol
mass of [tex]NaOH[/tex]= 10.9 g
Therefore, the correct answer is none of these. The amount of [tex]NaOH[/tex]needed to make the best buffer is 10.9 g.
Know more about buffer here:
https://brainly.com/question/13076037
#SPJ11
A 400.0 g sample of water is at 30.0'С How many joules of energy are required to raise the temperature of the water to 45.0'C ?
a) 628 J b) 1880J c) 25100 J d) 450 J
The specific heat capacity of water is 4.184 J/(g·°C).
The temperature change is:
ΔT = 45.0 °C - 30.0 °C = 15.0 °C
The amount of energy required is:
q = m × c × ΔT
where m is the mass of water in grams, c is the specific heat capacity of water, and ΔT is the temperature change in degrees Celsius.
Plugging in the values:
q = 400.0 g × 4.184 J/(g·°C) × 15.0 °C
q = 25104 J
Therefore, the answer is (c) 25100 J (rounded to two significant figures).
Heat capacity is the amount of heat energy required to increase the temperature of a substance by one degree Celsius (or one Kelvin). It is a physical property of a substance that relates the change in the internal energy of a system to the change in temperature. The heat capacity of a substance can be expressed either as specific heat capacity (the amount of heat required to raise the temperature of one gram of the substance by one degree Celsius) or as molar heat capacity (the amount of heat required to raise the temperature of one mole of the substance by one degree Celsius).
Visit here to learn more about heat capacity brainly.com/question/28921175
#SPJ11
Which of the following statement is true regarding migration of bio molecules? O The rate of migration is directly proportional to the current O The rate of migration is inversely proportional to the current O The rate of migration is directly proportional to the resistance of the medium O The rate of migration is directly proportional to the high molecular weight.
The correct statement regarding the migration of bio molecules is that the rate of migration is inversely proportional to the current. The correct option is the rate of migration is inversely proportional to the current.
This means that as the current increases, the rate of migration decreases. The reason for this is that when an electric field is applied to a solution, charged particles will move towards the electrode of the opposite charge. In the case of bio molecules, they will move towards the electrode that has the opposite charge to their own.
However, as the current increases, the number of charged particles in the solution also increases, leading to greater competition for space and slower migration rates. Additionally, the rate of migration is also affected by the resistance of the medium, with higher resistance leading to slower migration rates, and by the molecular weight of the bio molecules, with larger molecules migrating more slowly than smaller ones.
Therefore, it is important to consider all these factors when studying the migration of bio molecules in electric fields. The correct option is the rate of migration is inversely proportional to the current.
For more about migration:
https://brainly.com/question/17991559
#SPJ11
For the reaction between acetic acid and sodium hydroxide: 1. Write the equation of the reaction. (0.5pts) 2. How many moles of acetic acid are required to completely neutralize 25ml NaOH 0.5M? (0.5pts)
The equation of the reaction is [tex]CH_{3}COOH[/tex] + NaOH -> [tex]CH_{3}COOHNa[/tex] + [tex]H_{2}O[/tex]. We need 0.0125 moles of acetic acid to completely neutralize 25ml of NaOH 0.5M.
1. The equation for the reaction between acetic acid and sodium hydroxide is: [tex]CH_{3}COOH[/tex] + NaOH -> [tex]CH_{3}COOHNa[/tex] + [tex]H_{2}O[/tex]
2. To calculate how many moles of acetic acid are required to completely neutralize 25ml of NaOH 0.5M, we need to use the following equation: Moles = concentration x volume
First, we need to convert the volume of NaOH from milliliters to liters: 25ml = 0.025L, Then, we can use the concentration of NaOH (0.5M) and the volume in liters to calculate the number of moles of NaOH: Moles of NaOH = 0.5M x 0.025L = 0.0125 moles
Since the reaction is a 1:1 ratio, we know that we need the same number of moles of acetic acid as moles of NaOH. Therefore, we need 0.0125 moles of acetic acid to completely neutralize 25ml of NaOH 0.5M.
To know more about acetic acid, refer here:
https://brainly.com/question/12924347#
#SPJ11
Peleg has proposed an equation to model water uptake for a variety of dehydrated foods. In particular, this empirical equation was developed from data related to absorption of water for milk powder and rice. The equation, where Mt) is the moisture content at time t, Mo is the original moisture content of the sample, and kı and k2 are parameters that affect the rate of moisture uptake, is a rate equation similar to those used in chemical kinetics 1. What is the value of M(t) when t = 0 and when t = [infinity]?2. What is the value of dM(t)/dt when t = 0 and when t = [infinity]?
The equation proposed by Peleg to model water uptake for dehydrated foods is: dM(t)/dt approaches zero as t approaches infinity.
M(t) = k1t / (1 + k2t) + Mo
where M(t) is the moisture content at time t, Mo is the original moisture content, and k1 and k2 are parameters that affect the rate of moisture uptake.
To find the value of M(t) when t = 0, we substitute t = 0 into the equation:
M(0) = k1(0) / (1 + k2(0)) + Mo = Mo
So, M(0) = Mo.
To find the value of M(t) when t = infinity, we take the limit of the equation as t approaches infinity:
lim t→∞ M(t) = lim t→∞ k1t / (1 + k2t) + Mo
Since the denominator of the fraction becomes much larger than the numerator as t becomes very large, the fraction approaches zero. Therefore, we can simplify the equation to:
lim t→∞ M(t) = Mo
So, M(t) approaches Mo as t approaches infinity.
To find the value of dM(t)/dt, we differentiate the equation with respect to time:
dM(t)/dt = k1 / [tex](1 + k2t)^2[/tex]
To find the value of dM(t)/dt when t = 0, we substitute t = 0 into the equation:
dM(0)/dt = k1 / [tex](1 + k20)^2[/tex] = k1
So, dM(0)/dt = k1.
To find the value of dM(t)/dt when t = infinity, we take the limit of the equation as t approaches infinity:
lim t→∞ dM(t)/dt = lim t→∞ k1 /[tex](1 + k2t)^2[/tex]= 0
So, dM(t)/dt approaches zero as t approaches infinity.
Learn more about model water
https://brainly.com/question/28798288
#SPJ4
This experiment pertains Stereochemistry of ketone reduction. This one question has two parts.
Draw out the reaction of acetophenone with sodium borohydride in methanol.. You will observe tiny bubbles rising in the reaction mixture. What are they made of?
The reaction of acetophenone with sodium borohydride in methanol:
CH3COC6H5 + NaBH4 + CH3OH → CH3CHOHC6H5 + NaCH3OH + H2
The tiny bubbles that are observed rising in the reaction mixture are hydrogen gas (H2). The reduction of acetophenone by sodium borohydride produces hydrogen gas as a by-product, which appears as tiny bubbles rising to the surface of the reaction mixture.
The hydrogen gas is produced by the reduction of the borohydride ion (BH4-) by acetophenone. The reaction generates an intermediate species, a borate ester, which decomposes to release hydrogen gas.
The bubbles are a visible indication that the reduction reaction is taking place and can be used to monitor the progress of the reaction. The amount of hydrogen gas produced can also be used to calculate the yield of the reduction reaction.
To learn more about reaction of acetophenone here:
https://brainly.com/question/31433113
#SPJ11
4. Solid lead has a density of 11.34 g/cm³. Molten (liquid) lead has a density of 10.66 g/cm³. If you
melted a 510 g piece of lead, how much more volume will it take up?
The amount of volume that the piece of lead will take up would be 2.87 cm³
How to find the volume ?The difference in these volumes will give us the additional volume taken up by the melted lead.
Density (ρ) is defined as mass (m) divided by volume (V), or ρ = m/V. Rearranging the formula to find the volume, we get V = m/ρ.
First, let's find the volume of solid lead (V solid):
V solid = m solid / ρ solid
V solid = 510 g / 11.34 g/cm³
V solid ≈ 44.98 cm³
Now, let's find the volume of liquid lead (V_liquid):
V liquid = m liquid / ρ liquid
V liquid = 510 g / 10.66 g/cm³
V liquid ≈ 47.85 cm³
Finally, let's find the difference in volume:
ΔV = V liquid - V solid
ΔV ≈ 47.85 cm³ - 44.98 cm³
ΔV ≈ 2.87 cm³
Find out more on volume at https://brainly.com/question/20410293
#SPJ1
there are 8 isomeric alcohols with the formula c5h12o. specify the iupac name of this isomer: fill in the blank 1 is it chiral?
The eight isomeric alcohols with the formula [tex]C_{5} H_{12} O[/tex] are:
Pentan-1-olPentan-2-ol2-Methylbutan-1-ol2-Methylbutan-2-ol3-Methylbutan-1-ol3-Methylbutan-2-ol2,2-Dimethylpropanol (or neopentyl alcohol)3,3-Dimethylbutan-1-ol (or tert-amyl alcohol)To determine if an isomer is chiral, we need to look at its stereochemistry. An alcohol is chiral if it has a chiral carbon atom, which is a carbon atom bonded to four different groups.
From the list above, we can see that pentan-1-ol, 2-methylbutan-1-ol, 3-methylbutan-1-ol, and 3,3-dimethylbutan-1-ol all have a chiral carbon atom and are therefore chiral.
So, to fill in the blank, the name of the isomer is either pentan-1-ol, 2-methylbutan-1-ol, 3-methylbutan-1-ol, or 3,3-dimethylbutan-1-ol, and it is chiral.
Learn more about isomeric alcohols
https://brainly.com/question/30524246
#SPJ4
One of the reactions that is often studied in equilibrium experiment is: NH3 + H2O <-> NH4 + OHWhat would happen to the concentration of NH3 if you added some pure water to the reaction? briefly explain
Hi! When you add pure water to the reaction [tex]NH_{3} + H_{2} O <-> NH_{4} ^{+} + OH^{-}[/tex], it causes a shift in the equilibrium. Here's a step-by-step explanation:
1. Adding more water increases the concentration of [tex]H_{2} O[/tex] in the reaction mixture.
2. According to Le Chatelier's Principle, the system will respond by shifting the equilibrium to counteract this change, in this case, shifting to the right.
3. As the equilibrium shifts to the right, more [tex]NH_{3} [/tex] and [tex]H_{2} O[/tex] react to form [tex]NH_{4}^{+}[/tex] and [tex]OH^{-}[/tex]
4. Consequently, the concentration of [tex]NH_{3} [/tex] decreases as more of it is consumed to form [tex]NH_{4}^{+}[/tex] and [tex]OH^{-}[/tex].
So, adding pure water to the reaction results in a decrease in the concentration of [tex]NH_{3}[/tex] as the equilibrium shifts to the right to form more [tex]NH_{4}^{+}[/tex] and [tex]OH^{-}[/tex].
To know more about the Le Chatelier's Principle:
https://brainly.com/question/29009512
#SPJ11
What is the percent yield of CO2 if a reaction starts with 91.3 g C, He and produces 87.0 g CO2? 2С, Н, +90, - 6 CO, +6H,0 Select the correct answer below: О 30.4% О 87.5% О 76.4%, 0 748
To calculate the percent yield of CO2, we need to first determine the theoretical yield and then compare it with the actual yield (87.0 g CO2).
The balanced equation for the reaction is:
2C6H14 + 19O2 → 12CO2 + 14H2O
From the balanced equation, we can see that 2 moles of C6H14 (2 x C, He) produce 12 moles of CO2.
First, find the moles of C6H14 using the provided mass (91.3 g) and molar mass of C6H14 (86 g/mol).
moles of C6H14 = (91.3 g) / (86 g/mol) = 1.0616 moles
Now, use the stoichiometry of the reaction to find the moles of CO2 produced.
moles of CO2 = (1.0616 moles of C6H14) x (12 moles of CO2 / 2 moles of C6H14) = 6.3696 moles of CO2
Next, convert the moles of CO2 to grams using the molar mass of CO2 (44 g/mol).
theoretical yield of CO2 = (6.3696 moles of CO2) x (44 g/mol) = 280.2624 g CO2
Finally, calculate the percent yield using the formula:
percent yield = (actual yield / theoretical yield) x 100
percent yield = (87.0 g CO2 / 280.2624 g CO2) x 100 ≈ 31.0%
The percent yield of CO2 for the given reaction is approximately 31.0%.
Learn more about molar mass here:
https://brainly.com/question/22997914
#SJP11
determine the molar solubility of caso4 in a solution containing 0.16 m k2so4. ksp (caso4) = 7.1×10-5.
In a solution containing 0.16 M K2SO4, the molar solubility of CaSO4 is 4.44 x 10-4 M.
To determine the molar solubility of CaSO4 in a solution containing 0.16 M K2SO4 with a Ksp of 7.1 x 10^-5:
1. Write the solubility equilibrium equation: CaSO4 (s) <=> Ca2+ (aq) + SO42- (aq)
2. Identify the initial concentration of SO42-: 0.16 M (from the 0.16 M K2SO4 solution, since 1 mole of K2SO4 produces 1 mole of SO42-)
3. Set up an ICE (Initial, Change, Equilibrium) table:
CaSO4 (s) | Ca2+ (aq) | SO42- (aq)
Initial | 0 | 0.16 M
Change | +x | +x
Equilibrium| x | 0.16+x M
4. Write the Ksp expression: Ksp = [Ca2+][SO42-] = 7.1 x 10^-5
5. Substitute equilibrium concentrations into the Ksp expression: (7.1 x 10^-5) = (x)(0.16+x)
6. Since x is much smaller than 0.16, we can approximate that 0.16+x ≈ 0.16.
7. Solve for x: (7.1 x 10^-5) = (x)(0.16) -> x ≈ 4.44 x 10^-4 M
The molar solubility of CaSO4 in a solution containing 0.16 M K2SO4 is approximately 4.44 x 10^-4 M.
Learn more about molar solubility: https://brainly.com/question/28566275
#SPJ11
a solution contains 0.376 m potassium cyanide and 0.143 m hydrocyanic acid. the ph of this solution is .
The pH of a solution containing 0.376 M potassium cyanide (KCN) and 0.143 M hydrocyanic acid (HCN) is approximately 9.63.
To determine the pH of a solution containing 0.376 M potassium cyanide (KCN) and 0.143 M hydrocyanic acid (HCN), we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
Here, pKa is the acid dissociation constant for HCN (approximately 9.21), [A⁻] is the concentration of the conjugate base (potassium cyanide, 0.376 M), and [HA] is the concentration of the acid (hydrocyanic acid, 0.143 M).
pH = 9.21 + log(0.376/0.143)
Now, calculate the pH using the given concentrations:
pH ≈ 9.21 + log(2.62) ≈ 9.21 + 0.42 ≈ 9.63
Therefore, the pH of this solution is approximately 9.63.
Learn more about Henderson-Hasselbalch equation here: https://brainly.com/question/26746644
#SPJ11
how many grams of water are produced from 5.0 mol of oxygen gas and 8.0mol h2?
The 180.15 grams of water produced from 5.0 moles of [tex]O2[/tex] and 8.0 moles of [tex]H2[/tex].
How will be water are produced?To solve this problem, we first need to write the balanced chemical equation for the reaction between oxygen gas and hydrogen gas to produce water:
[tex]2 H2 + O2 → 2 H2O[/tex]
According to the equation, 1 mole of [tex]O2[/tex] reacts with [tex]2[/tex] moles of [tex]H2[/tex] to produce [tex]2[/tex] moles of [tex]H2O[/tex].
Therefore, we can use the mole ratios to determine how many moles of water are produced from 5.0 mol of [tex]O2[/tex] and 8.0 mol of [tex]H2[/tex]:
From the balanced equation, we can see that 1 mole of [tex]O2[/tex] reacts with [tex]2[/tex] moles of [tex]H2[/tex] to produce 2 moles of [tex]H2O[/tex].
So, if we have 5.0 moles of [tex]O2[/tex] and 8.0 moles of [tex]H2[/tex], we have an excess of [tex]H2[/tex]. The limiting reagent in this reaction is [tex]O2[/tex] , because we have less moles of [tex]O2[/tex] than we need to react with all of the [tex]H2[/tex].
To determine the amount of water produced, we need to use the mole ratio from the balanced equation:
moles of [tex]H2O[/tex] = moles of [tex]O2[/tex] x ([tex]2[/tex] moles of [tex]H2O[/tex] / 1 mole of [tex]O2[/tex] )
moles of [tex]H2O[/tex] = 5.0 mol [tex]O2[/tex] x ([tex]2[/tex] mol [tex]H2O[/tex] / 1 mol [tex]O2[/tex] )
moles of [tex]H2O[/tex] = 10.0 mol [tex]H2O[/tex]
Now we have the number of moles of water produced. To calculate the mass of water, we need to use the molar mass of water, which is approximately 18.015 g/mol:
mass of [tex]H2O[/tex] = moles of [tex]H2O[/tex] x molar mass of [tex]H2O[/tex]
mass of [tex]H2O[/tex] = 10.0 mol [tex]H2O[/tex] x 18.015 g/mol
mass of [tex]H2O[/tex] = 180.15 g
Learn more about water produced
brainly.com/question/2126065
#SPJ11
Please answer the question in the attachment
The mole% of ²⁵Mg, given that average atomic mass of magnisium is 24.3 is 10%
How do i determine the mole% of ²⁵Mg?From the question given above, the following data were obtained: ²⁵
Average atomic mass of boron = 24.3Mass of 1st isotope, ²⁴Mg = 24Mole% of 1st isotope, ²⁴Mg (1st%) = 80%?Mass of 2nd isotope, ²⁵Mg = 25Mass of 3rd isotope, ²⁶Mg = 26Mole% of 2nd isotope, ²⁵Mg (2nd%)= B =? Mole% of 3rd isotope, ²⁶Mg (3rd%) = C = 100 - 80 - B = 20 - BAverage atomic mass = [(Mass of 1st × 1st%) / 100] + [(Mass of 2nd × 2nd%) / 100] + [(Mass of 3rd × 3rd%) / 100]
24.3 = [(24 × 80) / 100] + [(25 × B) / 100] [(26 × (20 - B) / 100]
24.3 = 19.2 + 0.25B + 5.2 - 0.26B
Collect like terms
24.3 - 19.2 - 5.2 = 0.25B - 0.26B
-0.1 = -0.01B
Divide both sides by -0.01
B = -0.1 / -0.01
B = 10%
Thus, we can conclude that the mole% of ²⁵Mg is 10%
Learn more about percentage abundance of isotope:
https://brainly.com/question/24873591
#SPJ1
Describe and explain how crude oil is separated into fractions by fractional distillation
Answer:
Hello, the answer is!!!!
(drumroll)
Heated crude oil enters a tall fractionating column, which is hot at the bottom and gets cooler towards the top. vapors from the oil rise through the column. vapors condense when they become cool enough. liquids are led out of the column at different heights.
explain why it is necessary to add an aqueous solution of sulfuric acid to the reaction solution after the reduction to form the alcohol product.
The addition of an aqueous solution of sulfuric acid after the reduction step is necessary to neutralize any remaining base that may have been used in the reduction process. This is important because the presence of residual base can interfere with the subsequent steps of the reaction and lead to unwanted side products. Additionally, the sulfuric acid can protonate the alcohol product, which helps to drive the reaction forward and improve the yield. Overall, the addition of sulfuric acid helps to ensure that the desired alcohol product is formed efficiently and with high purity.
Adding an aqueous solution of sulfuric acid serves as an acid catalyst. This catalyst accelerates the reaction rate and facilitates the conversion of the intermediate product into the desired alcohol product.
Here is a step-by-step explanation:
1. The reduction process takes place, typically converting a carbonyl group into an alcohol group.
2. The intermediate product is formed but may not be stable or could be slow to convert into the desired alcohol product.
3. An aqueous solution of sulfuric acid is added to the reaction mixture.
4. The sulfuric acid acts as an acid catalyst, providing protons (H+) that help stabilize the intermediate and facilitate the conversion to the alcohol product.
5. The reaction proceeds more efficiently, and the desired alcohol product is formed.
In summary, the addition of an aqueous solution of sulfuric acid after the reduction is necessary to accelerate the reaction rate and promote the formation of the alcohol product.
For more questions on aqueous solutions : https://brainly.com/question/15328999
#SPJ11
One of the diagrams below best represents the relationship between delta G
Question in image.
The graph to the left represents the relationship between ΔG° because S° is positive, TS° becomes a larger positive number as T increases.
What is the relationship between ΔG° and temperature of a reaction?The relationship between ΔG° (standard free energy change) and temperature (T) of a reaction is described by the following equation:
ΔG° = -RTlnK
where R is the gas constant, T is the temperature in Kelvin, and K is the equilibrium constant of the reaction. This equation is known as the Gibbs-Helmholtz equation.
From this equation, ΔG° and temperature are inversely proportional to each other. As the temperature increases, the value of ΔG° becomes less negative (or more positive), which means that the reaction becomes less spontaneous. Similarly, as the temperature decreases, the value of ΔG° becomes more negative (or less positive), which means that the reaction becomes more spontaneous.
Find out more on standard free energy change here: https://brainly.com/question/17214293
#SPJ1
A 35.41 g sample of a substance is initially at 28.9 degrees Celsius. After absorbing 2461 J of heat the temperature of the substance is 154.4 degrees Celsius. What is the specific heat of the substance?
The specific heat of the substance, is determined by using the formula: q = m * c * ΔT, Therefore, the specific heat of the substance is 0.586 J/g°C.
To find the specific heat of the substance, we can use the formula:
q = m * c * ΔT
where q is the amount of heat absorbed, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.
In this problem, we are given the mass of the substance (m = 35.41 g), the initial temperature (T1 = 28.9 °C), the final temperature (T2 = 154.4 °C), and the amount of heat absorbed (q = 2461 J).
First, we need to calculate the change in temperature:
ΔT = T2 - T1
ΔT = 154.4 °C - 28.9 °C
ΔT = 125.5 °C
Now we can plug in the values and solve for the specific heat:
q = m * c * ΔT
2461 J = 35.41 g * c * 125.5 °C
c = 2461 J / (35.41 g * 125.5 °C)
c = 0.586 J/g°C
Therefore, the specific heat of the substance is 0.586 J/g°C.
Visit here to learn more about specific heat : https://brainly.com/question/11297584
#SPJ11
2 no (g) ⇌ n2 (g) o2(g) heat change: decrease in temperature what is the effect on the concentration of [o2]a. increasesb. more info is neededc. decreases d. stays the same
The correct answer is b. more info is needed.
For the reaction 2 NO(g) ⇌ [tex]N_2(g) + O_2(g),[/tex]; Heat change= ?: with a decrease in temperature the effect on the concentration of [[tex]O_2[/tex]] can not be determined as it is not given whether the heat is released or absorbed.
To determine the effect on the concentration of [tex]O_2[/tex], we'll apply Le Chatelier's principle. The principle states that if a system at equilibrium is subjected to a change in temperature, pressure, or concentration of a component, the system will adjust to counteract that change and re-establish equilibrium.
Since the reaction is exothermic (releases heat) or endothermic this can not be said unless we have the value of heat change we can not determine the effect of change in temperature on the concentration of oxygen gas.
Therefore, to determine the effect on the concentration of [tex]O_2[/tex]:
b. more information is needed.
Learn more about Le Chatelier's principle here: https://brainly.com/question/29009512
#SPJ11