In terms of diameter, the planet saturn is larger than _______ , but smaller than _______.

The vertical impulse by the lift force during this time is 4.15 by minutes for Newton second.

We have a demon That there is a force of 52 down cause of 15. Right? This is what we have you in the questions and acting on the bill. Be both masked by Graham of Mars five g. No. In the meantime. And travelers given that the time and develop acting on this fourth, you should humanists. But we need to find the impulse England's. They seem to not advise you actually. This is what we need to find. So we know that false change in momentum much time. So basically impulses change momentum, but you find impulses changing moment also jay so G is false in campaign so we can put forth here. The forces to do time 59 1 dime. That's Spanish for -5. This was with 15 to 10 days to four minutes, five Newton and two times three seconds Volunteers. They will get 15 into 10 days to the R -4. 15 10 by minus for Newton's second.

To know more about vertical impulse click-

https://brainly.com/question/26152956

#SPJ1

Answer:

My own understanding of gravity is not correct for galaxy-size scales.

In writing an essay you must consider the structure of the essay, Hence, the structure of the essay should be considered;

Generally, Individual factors, such as expertise, personal taste choice, emotions, hunger level, health status, special dietary requirements, ethnicity, and personal income, are some examples of these influences that make a contribution to an individual's food choices.

Other examples of these influences that contribute to a person's food choices include outside factors.

A person's religious beliefs may have a significant impact on the kinds of meals they purchase. For instance, individuals who follow the religion of Islam will not consume cattle or lamb that has not been killed using the halal procedure, but those who follow the religion of Jews will only consume items that have been certified as kosher.

Read more about food choices

https://brainly.com/question/29495121

#SPJ1

Answer: yo  your in high bro  u need to learn this stuff if you want to past u fell me ? Explanation:

The Mass of the board is also 60kg when a 60 kg load is located at the very end of a uniform board of length l, which is supported one-quarter of the way from the end and is balanced.

The Mass of the board is also 60kg because of a 60 kg load is located at the very end of a uniform board of length l which is also balanced and supported by one end.

Given:

Load is located at the very end of a uniform board= 60Kg

length of uniform board = L

Now to find the mass of the board do as follows;

⇒FN(l/4)-Mg(l/4)-60g(l/4)=0

⇒Mg(1/4)=60g(1/4)

⇒M(mass)=60kg

Hence , the Mass of the board is also 60kg .

To know more about Mass  visit

https://brainly.com/question/14044933

#SPJ4

The gravitational force exerted on a 50 kg mass on Jupiter's surface is 1.30×[tex]10^{3[/tex] N. Acceleration due to gravity on Jupiter is 2.23 times that of the earth.

Gravitational force is due to mass in an object. This is an attractional force with which all objects are attracting each other. All heavenly bodies have great mass. They attract each other and also if an object is reaching in their gravitational pull.

Force of gravity is calculated using the formula

F = G m1. m2/ [tex]r^{2}[/tex]

We are given mass of Jupiter and radius in terms of earth mass and radius.

volume of earth = 4/3 π[tex]r^{3[/tex]

Volume of Jupiter= 1323 × volume of earth

4/3 π[tex]R^{3[/tex] = 4/3 π[tex]r^{3[/tex] × 1323

R = r [tex]\sqrt[3]{1323}[/tex] =10.97 r

So, Gravity force on Jupiter = G 50 × 318 M/10.97 ×10.97[tex]r^{2}[/tex]

                                             =  50 ×5.97×[tex]10^{24[/tex]÷ 10.97×10.97×6.37×[tex]10^{6[/tex]

after calculation we get the value 1.30×[tex]10^{3[/tex] N

To know more about gravitational force here

brainly.com/question/12528243

#SPJ4

The change in gravitational potential energy stored in 16 Jule.

Gravitational potential

In classical mechanics, of the  gravitational potential at in a  location is equal to the work per unit mass that's would be needed to Move an object to that locations from a fixed references  location. It is analogous to the electric potential with the mass playing the role of charge.

Sol-As per the given question ∆PE = mgh

M= skg

g= 4m/s^2

∆h = 2m

∆PE = 2m×4m×2m

= 16 Joules.

To know more about gravitational potential energy click-

https://brainly.com/question/15896499

#SPJ1

The critical angles for red and violet light through diamond are 24.5° and 24.0°, respectively.

The incidence on incidence at which the refraction angles equals 90 degrees is known as that of the critical angle. The polarization di incident light and the light beam bends in the direction of normal when it enters a thicker environment from a similarly rarer medium.

The critical angle is the angle of impact that provides a 90-degree angle of refraction. Keep in mind that an angle of impact value is how the angle of inclination is defined. For water-air borders and crown glass-water borders, the angle of inclination would be 48.6 degrees and 61.0 degrees, respectively.

To know more about critical angles visit:

https://brainly.com/question/24796244

#SPJ4

Positive acceleration describes an increase in speed; negative acceleration describes a decrease in speed. Hence option C is correct.

Acceleration is defined as the speed at which an object's velocity changes over time. It is a vector quantity to accelerate. If a point or object travelling straight forward accelerates or decelerates, it is moving faster or slower.  The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t).

When the car accelerates positively, its speed rises. As the car slows down, its speed decreases. Negative acceleration occurs when a force causes a body's velocity to decrease. Therefore, the body's negative acceleration can also be referred to as its deceleration.

Thus, positive acceleration describes an increase in speed; negative acceleration describes a decrease in speed. Hence option C is correct.

To learn more about acceleration, refer to the link below:

https://brainly.com/question/12550364

#SPJ1

The change or mutation in a segment of DNA after replication may lead to changes in the genotype, the traits of the organism and the proteins (option i, ii and iii).

A genetic mutation is any change in the nucleotide bases of the genome of an organism that may be associated with modifications in the phenotypic traits or features of the organism if this change alters the expression of a given gene that produces a particular protein.

Mutations may be neutral when they don't show an apparent effect on the phenotype of an organism such as occur in mutations located in intergenic regions.

Therefore, with this data, we can see that a genetic mutation may alter the proteins produced by an organism which has a direct effect on the phenotype by altering the structures that it is able to synthesize.

Learn more about genetic mutations here:

https://brainly.com/question/29000870

#SPJ1

Therefore, if the slit width an is cut in half, the central maximum expands to double its original size.

A wave is an energetic disruption in a fluid that doesn't include any net particle motion. Elastic deformation, a change in pressure, an electrical or magnetic intensity, an electric potential, or a shift in temperature are a few examples.

The SI system for wavelength is the meter, which is frequently abbreviated as m. Frequency is measured using multiples or subdivision of a meter. Notably, exponential ratios of 10 are employed when widths are a key aspect.

To know more about Wave visit:

https://brainly.com/question/19477984

#SPJ4

The complete question is-

Consider a wave passing through a single slit. What happens to the width of the central maximum of its diffraction pattern as the slit is made half as wide?

Its width does not change.

It becomes one-half as wide.

It becomes twice as wide.

It becomes one-fourth as wide.

It becomes four times wider

The force exerted on the system produces WD = 20J and K.E = 0.736J of work if a speed of a box that appears of ramp is 0.80 m/s.

At this point, describing a force as pushing or pulling is quite acceptable. There is no such thing as a force how an item "has in it" and "contains." A force is applied to one thing by another. The idea of the a force encompasses both living and non-living things.

Mass m = 23kg

Force F = 10N

Length of the ramp = 2m

Velocity V = 0.8m/s

The force's efforts on the system that results in

WF = F × D = 10 × 2.0 = 20 J

The force's efforts on the system that results in, u = 0.

dKE = ½mv² = 0.5 × 2.3 × 0.8 × 0.8

= 0.736 J

To know more about force visit:

brainly.com/question/13191643

#SPJ4

Explanation:

this question we need to find the amount of heat they just removed from 60 g of steam At 100°C. To change too 60 g of water two 20 degrees Celsius. The specific heat of liquid water As 4.184 jewel program degree Celsius specific heat of steam As 1.84 joules per gram degree C. Heat off vaporization of water to is 40.67. Kill a jewel family. First this 60 g of 18 has converted to 60 g of water at 100°C. As the heat removed will be en indu L status and as the number of malls and Elysa heat of vaporization, that is 40.67. Hello Joel palmer so that each one that is the heat removed is equal to 60 indu 40.65 divided by 18. That is the given Mars by Moller mass gives the number of moles. That is by 16 to 40.65 by 18. Such that H one. The heat remote is obtained us 1 35.5 kg jule. Now the water is converted from 100°C to 20 degrees Celsius. The heat at a more can be calculated by mm indu C'e, hindu deity. That is M is the mass. C is the specific heat capacity. That is 4.18 Joule per kilogram and DT is the change in temperature that is 100 minus 20. That is 80°C says that he'd removed H2 is equal to .06 Hindu 4.18. For in due 100 minus 20 obtained us 20 kg jokes. Thus the total heat. Little mood will be H one Plus H two. That is 1 35.5 plus 20 And it has obtained as 155.5 kilo jule.

Answer:

third one

Explanation:

x is always the least sum of a calculation as per as the chart it's nb-90

Answer:

Explanation:

KE=mv(v)/2

KE=2(1.5)(1,5)/2

KE=2.25

Important Formulas:

[tex]KE=.5mv^2[/tex]

__________________________________________________________

[tex]m=2kg[/tex] (measured in kg)

[tex]v=1.5m/s[/tex] (measured in meter per second)

[tex]KE=?[/tex] (measured in joules)

__________________________________________________________

[tex]KE=.5(2)(1.5)^2[/tex]

[tex]\fbox{KE = 2.25J}[/tex]

Answer:

A. Freezing point: Increase.

B. Melting point: Decrease

C. Boiling point:  Decrease​

Explanation:

As we go up in higher altitudes the air becomes on and less dense, hence the decrease in the water vapor content at such altitude leads to a decrease of boiling point.

Thus the air above is cool and much colder than at the ground surface. The vapor pressure is temperature-dependent and thus the melting point will decrease.

Sound components are identified as coming from the same sound source. this means that the components are generated by the same physical object or process, and they tend to have similar characteristics such as frequency, timbre, and intensity.

 These components are usually perceived as being part of a single sound or voice, rather than being perceived as separate sounds.

For example, if you are listening to a person speaking, the different sound components that make up their voice, such as their pitch, vowel sounds, and consonant sounds, are all generated by the same source (the person's vocal cords and mouth).

In some cases, sound components can be isolated and analyzed individually. For example, in audio engineering or music production, in order to shape the overall sound of a recording or performance.

Additionally, sound components can be synthesized or manipulated using digital audio software, allowing for the creation of new sounds or the modification of existing ones.

Learn more about Sound from

https://brainly.com/question/29667803
#SPJ1

Answer:

The rock hits the ground 29.25 m far from the point of drop.

Explanation:

We know,

s = ut + 1/2 at²

to find the time taken for the rock to hit the ground, where u is 0 and a = g,

2.1 = 4.9t²

t = 0.65

The horizontal distance covered in this time:

distance = speed x time

d = 45 x 0.65

d = 29.25 m

To sterilise a 50.0-g glass infant bottle, we must increase its heat from 22.0 to 95.0 degrees Celsius, or 3066 J of heat is transferred.

Heat is the result of the movement of kinetic energy within a material or an item, or from form of energy to a material or an object. Electromagnetic energy can be transported using three different mechanisms: radiation, conduction, and convection. Conduction of heat through solids, convection of liquids and gases, and electromagnetic radiation (radiation).

When a substance is subjected to a material-specific phase-change temperature, the material immediately undergoes a phase shift from a solid to a liquid. sources include solar energy, heat pumps, deep geothermal heat pumps, nat gas, lpg (LP), oil, coal, and wood.

50.0 g (0.84 J/g C) of heat was transported (95 C - 22 C)

= 3066 J of heat transferred

To know more about heat visit:

https://brainly.com/question/28921175

#SPJ4

The reason behind action and reaction forces not balance each other out is d)because the action force acts on the carriage, while the reaction force acts on the horse. So, correct option is d.

Forces generally act two by two, which are known as activity and response forces.

The activity force is the power applied to an article by the first activity, and the response force is an equivalent power applied by the item the other way.

A power that is applied to an item is alluded to as an activity force. A response force is the consequence of an inverse heading activity force.

Newton's third law of motion tends to these two forces, alluded to as activity and response powers.

The depicted activity and response powers don't adjust each other out in light of the fact that the activity force follows up on the carriage and the response force follows up on the pony.

Hence, correct option is d.

To know more about action and reaction forces, visit here:

brainly.com/question/13186730

#SPJ4

(Complete question) is:

A horse pulls on a carriage. By Newton's third law, the carriage pulls back on the horse with equal force. Why do the action and reaction forces just described not balance each other out?

A.

because this is not an action--reaction pair

B.

because action and reaction forces are not equal in magnitude in this case

C.

because action and reaction forces act in the same direction in this case

D.

because the action force acts on the carriage, while the reaction force acts on the horse

The braking force that caused the car to skid to a stop is given by the equation:

Force = mass * acceleration

Plugging in the values for the mass of the car (2400 kg) and its acceleration (-7 m/s/s), we get:

Force = 2400 kg * (-7 m/s/s)

= -16800 N

This is the force that the brakes had to exert on the car in order to bring it to a stop. This force would have acted in the opposite direction to the car's motion, or to the right in this case.

A golf ball with a mass of 0.050 kg is at rest on the tee and accelerates to 102 m/s as soon as it is struck. The average force applied to the ball if the club and ball made contact for 0.94 ms is 6.3 kN.

Impulse is a term used to describe how a net force—a specific type of "moving force"—affects an object. An impulsive force is a strong force that acts quickly to cause a finite change in momentum. Impulsive forces were conceptualized separated from regular forces throughout science history.

Force times time equals change in momentum for an impulse.

F = mv/t

F = (0.050 kg)(102 m/s) / 0.81 ms × 10⁻³ = 6.3 kN

To learn more about impulse visit:

brainly.com/question/904448

#SPJ4

The type of observation that astronomers can use to measure the composition of extrasolar planet atmospheres : comparisons of a star's spectrum when planet is in transit versus when it is eclipsed.

Several planets outside the Solar System called exoplanets have been observed to have atmospheres. At the present , most atmosphere detections are of hot Jupiter or Neptune that orbit very close to their star and therefore have heated and extended atmospheres.

As a transiting extrasolar planet passes in front of its host star, one can observe the exoplanet's atmosphere as it is backlit by the star. Additional atmospheric observations can also be made by watching as exoplanet disappears and reappears from behind the star.

To know more about extrasolar planets, refer

https://brainly.com/question/14018668

#SPJ4

A scientific law is something we can use to make a specific, concrete prediction. For example, the law of gravitation states that masses will attract each other, and you will find that this is always the case. However, it can also be used to make concrete statements about the properties of an object in the right conditions. For example, if a material were found that was not attracted to other objects with masses, we could say that the material has no mass (Option B).

A scientific law is a well sustained statement or model based on diverse hypotheses that were tested by using the scientific method, which additionally allows us to make predictions about certain questions raised by observing the natural world.

Scientific laws are based on experimentla and observational procedures that can be used to test all statements of the laws and thus also verified in their assumptions.

Therefore, with this data, we can see that scientific law is based on several well sustained assumptions that were tested by using the scientific method and thus conformed to make predictions about certain outcomes

Complete question:

Choose the right option. A scientific law is something we can use to make a specific, concrete prediction. For example, the law of gravitation states that masses will attract each other, and you will find that this is always the case. However, it can also be used to make concrete statements about the properties of an object in the right conditions. For example, if a material were found that was not attracted to other objects with masses, we could say that____

the material is charged.

the material has no mass.

the material must be floating.

the material has very little mass.

Learn more about scientific laws here:

https://brainly.com/question/1432753

#SPJ1

The magnitude and direction of the magnetic force on a particle of charge is - 2.21 in the opposite direction.

Magnetic force is defined as the electrically charged particles that are in motion and exhibit either attraction or repulsion. The interaction between moving and stationary charged particles is explained by the electromagnetic force, commonly known as the Lorentz force.

The magnitude and direction of the magnetic force can be calculated as

F = q v B sinθ

Given q = 13 C

v = - 20 m/s

B =  0.5 T²

F = 13 C x - 20 m/s x 0.5 T² sinθ

F = - 130 sinθ

Let θ is equal to 1

Then, F = 130 sin1

F = - 130 x 0.017

F = - 2.21

Thus, the magnitude and direction of the magnetic force on a particle of charge is - 2.21 in the opposite direction.

To learn more about magnetic force, refer to the link below:

https://brainly.com/question/3160109

#SPJ1

Answer:

D

Explanation:

More pressure pushes more gas into the solvent

   think about the opposite when you open a soda and decrease the pressure....the gas comes out of solution....

At a distance of 15 cm, the magnetic field strength (measured in microteslas) is 0.68 T.

A magnetic field, a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials.  The magnetic field is the area in which a magnet produces its magnetic effects. We use the magnetic field as a tool to describe how the magnetic force is distributed in the vicinity and inside something magnetic in nature.

Magnetism is created by moving electric charges. The tiniest units of matter are known as atoms. Each atom contains charged particles called electrons. The nucleus, or core, of an atom is made up of electrons that spin like tops.

The Earth's magnetic field (and surface magnetic field) has two poles, one close to the planet's geographic north pole (see Magnetic North Pole) and the other close to its geographic south pole. Together, these poles resemble a magnetic dipole (see Magnetic South Pole).

Formula to calculate magnetic field around a wire:

B=(μ_° I)/2πd

B = The strength of magnetic field (Tesla)

μ₀ = permeability of free space = 4π × 10⁻⁷ T/mA

I = the current (Ampere)

π = 3.14

d = distance from the wire (m)

Given

I = 1.70 A

D=15.0 cm

B=(μ_° I)/2πd

B=(4π × 10⁻⁷×1.70)/2πd

B=(2 × 10⁻⁷×1.70)/d

B=(3.4× 10⁻⁷)/15

B=0.68×〖10〗^(-6)

B=0.68μT

To know more about Magnetic Field visit:

https://brainly.com/question/23096032

#SPJ4

One important way astronomers can learn in some detail about what happens when galaxies collide is to simulate galaxy collisions on a large computer and watch what the simulation predicts.

Simulating galaxy collisions on a large computer allows astronomers to observe how galaxies interact and evolve when they collide.

They can observe how stars, dust, and gas interact, how the shape of the galaxies change, how the distribution of stars changes, and how the total mass of the galaxies is affected.

They can also observe how the collision affects the gas and dust, and how they form new stars, as well as how subsequent collisions can cause the galaxies to merge completely. Simulations provide a powerful tool to gain insight into the complexities of galaxy collisions and to understand how galaxies form, evolve, and interact.

Learn more about the galaxies collide:

https://brainly.com/question/25123335

#SPJ4

If we know the stall torque and no load speed of a pm dc motor, the maximum power motor can deliver is P max = 1/2* Tstall * 1/2* ω(no load).

A mechanical device that produces stall torque has an output rotational speed of zero. Electric motors are capable of developing torque when stalled.

However, as the current flowing is at its maximum while an electric motor is halted, they are vulnerable to overheating and potential damage.

The no load speed is the speed when running at nominal voltage and zero load.

So, the maximum power motor can deliver is P max = 1/2* Tstall * 1/2* ω(no load).

To know more about power:

https://brainly.com/question/28528630

#SPJ4