In order to build a skyscraper Builders, Inc. hires 400 construction workers and 50 managers. Builders, Inc. represents A entrepreneurship B land C capital D labor

Answers

Answer 1

Answer:A

Explanation:


Related Questions

9. An orifice tube restriction is often indicated by:
A.low gauge pressure
B.high gauge pressure
C.inoperative compressor
D.no compressor cycling

Answers

Answer:

I believe 80% the answer is low gage pressure.

Explanation:

while naturally a restriction of an orifice like placing your thumb on a water hose would cause a high pressure output, however in an entire system if the proper amount of fluid is not making its way through the system then there would be inadequate system pressure. I hope my train of thought is correct though. let me know either way

all of the following are steps in the problem solving process except a. try, b. reflect, c. debug, d. define

Answers

Answer:

a

Explanation:

What is a rivet and how do tehey work

Answers

Answer:

A rivet is a mechanical fastener composed of a head on one end and a cylindrical stem on another (called the tail) which has the appearance of a metal pin.

When installed the rivet is either drilled, placed or punched into a hole, afterwards the tail is then deformed, holding the rivet in place. When finished the tail has the appearance of a dumbbell shape completing the riveted joint.

The traditional number of brick in a cube

Answers

Answer:

500 Bricks

Explanation:

what is a type of technology that can be attached to a tag and used to identify postal packages ​

Answers

Here’s the answer
Ur welcome

Engineering is a broad category that includes a variety of occupations and attempts to solve problems using math and

Answers

Answer:

Engineering is a broad category that includes a variety of occupations and attempts to solve problems using math and  systematic and scientific processes.

Explanation:

Engineering is the scientific discipline that deals with the implementation of science on materials, constructions, machines, systems and processes to realize a specific goal. It is an area of ​​technical activity that includes a number of specialized areas and disciplines aimed at the practical application of scientific, economic, social and practical knowledge in order to turn natural resources for the benefit of humans.

The goals of engineering activities are the invention, development, creation, implementation, repair, maintenance and / or improvement of equipment, materials or processes.  Engineering is closely intertwined with science, relying on the postulates of fundamental science and the results of applied research. In this sense, it is a branch of scientific and technical activity.

Answer:

Engineering is a broad category that includes a variety of occupations and attempts to solve problems using math and Science

Edge 2021

Gretchen is looking for a cord with three prongs in the welding shop. Which of the following is the voltage of the power cord?
O 3
O 30
O 10
O 110

Answers

110v positive, negative and ground

How can a company distinguish between fully certified engineers and those who are not as qualified?
A professional in the same field must write the engineer a letter of recommendation.
b.Fully certified engineers have taken a PE examination and have received a Professional Engineering license.
c.Fully certified engineers must earn at least a master’s degree in their specialty.
d.The engineer will need to work for the company for at least six months in order to gain experience.

Answers

Answer:

The correct option is;

b. Fully certified engineer have taken a PE examination and received a Professional Engineering license

Explanation:

To be recognized as a licensed engineer, it is required for the applicant to have completed a university degree program that lasts up to 4 years and to have worked for up to 4 years under the supervision of a Professional Engineer and pass two exams that test competency of an engineer, known as the Fundamentals of Engineering (FE) exam and the Principles and Practice of Engineering (PE) exam.

Answer:

The correct answer is C for most but be careful the orders can change.

Explanation:

Fully certified engineers have taken a PE examination and have received a Professional Engineering license.

What are examples of professional organizations? Check all that apply. American Institute of Architects Business Professionals of America DECA American Medical Association Screen Actors Guild American Society of Mechanical Engineers SkillsUSA Future Educators Association

Answers

Answer:

The correct option are;

American Institute of Architects

American Medical Association

American Society of Mechanical Engineers

Explanation:

A professional association is an association with the main purpose of promoting the basics and practices of a given profession. A professional association serves as a pillar for the interest of those practicing a particular profession and those of the best interest of the public.

The Business Professionals of America, DECA, Skills USA, and Future Educators are student associations while Screen Actors Guild is a labor union

American Institute of Architects, American Medical Association, and American Society of Mechanical Engineers. Therefore, options A, D, and F are correct.

Professional organizations are groups or associations that are formed by individuals within a particular profession or industry. They serve as a platform for professionals to come together, network, collaborate, and advance their careers.

These organizations often have a focus on professional development, knowledge sharing, advocacy, and setting industry standards. Membership in professional organizations can provide individuals with access to resources, training, and industry updates.

Learn more about professional organizations, here:

https://brainly.com/question/12644612

#SPJ6

Which conditions are required for nuclear fusion to begin

Answers

Fusion processes require fuel and a confined environment with sufficient temp, pressure, and confinement time to create a plasma in which fusion can occur.

Answer:

1.) the gas cloud must be very dense

2.) atoms must be stripped of their electrons

3.) temperature must exceed 14 million kelvin

Explanation:

Plato/edmentum

1. You purchased a U.S. socket set that contained 13 sockets ranging from 1/4" to 1". List the socket sizes in order from smallest to biggest:

Answers

Answer:

sorry for the spam

Explanation:

1. Of the following answers, which is NOT a method to control dangerous welding processes?
Purge gas damming systems Glove boxes/bags Fume-less electrodes Backing plates

Answers

Answer:

The correct option is;

Purge gas d a m m i n g systems

Explanation:

The hazards that can occur during a welding process includes exposure to molten metal, hot s l a g, flying sparks, ultraviolet light, skin burns from chemicals, inhalation of toxic fumes, fire outbreak, and electric shocks

The purge gas is meant to protect the weld pool from contamination by other reactive gases, such as oxygen and steam, while the weld zone is still molten or very hot. It does not protect the welder from the produced poisonous fumes

Purge gas d a m m i ng systems, are used to reduce the amount of gas used for purging during welding so as to reduce the cost of the consumable inert gas used for welding and the time for welding.

Glove boxes or bags can be used to protect the welder from welding hazards by completely enclosing the work area and holding the poisonous fumes within the enclosure, away from the welder

Fume-less electrodes are electrodes that produce lesser amount of fumes compared to the generally available electrode of similar specification

Backing plates can provide support to hot molten weld metal during welding processes such as e l e c t r o s l a g welding

Answer: Fume-less electrodes

Explanation: I am currently doing dual credits so I have welding classes. Based off my experience, having electrodes that are scentless is risky, because the electrodes can produce harmful chemical too, which therefore you cannot feel until the damage is already done.

how does negative feedback influence the behavior of a system .

Answers

Negative feedback is a process by which a system responds to a change in its output by counteracting that change, which helps to maintain the stability of the system.

How to explain the information

This feedback mechanism is used in many different systems, from biological organisms to technological systems.

In a negative feedback loop, the output of the system is measured, and this measurement is compared to a desired or setpoint value. If the output deviates from the setpoint, the feedback mechanism initiates a corrective action to bring the output back to the setpoint value. This corrective action can be either reducing the input to the system, or increasing it.

Learn more about system on

https://brainly.com/question/14688347

#SPJ1

what does a graphic designer need to do to monitor the progress of the project

Answers

Answer:

At first the graphic designer has to break the process down into it's fundamental components. Which could be:

1) Discussion and Clear Comprehension of the Brief

2) Research and Collection of Information

3) Sketching

4) Execution and Experimentation

5) Finalization

6) Revision and Further Corrections

7) Submissions

Then self-analysis is required to figure out the current stage process. Project management soft-wares such as Trello could be helpful when it comes to tracking the progress. Hope this answers the question.

Explanation:

How would an engineer know if a product design were feasible?
The design has never been developed before.
O The design fits into the engineer's original vision.
O The design has already been proven to keep the cost of the project down.
O The design meets all of the criteria and limitations designated by the project.

Answers

- the last one ‘design meets all the criteria...’
The answer is - The design meets all of the criteria and limitations designated by the project.

Cell phones require powerful batteries in order to work effectively. Which
activity is best described as an engineering endeavor related to cell-phone
batteries

Answers

The activity that is best described as an engineering endeavor related to cell-phone batteries is option D. Improving their design to make it easier to recycle them when they are no longer useful.

What batteries are used for cell phones?

Lithium-ion (Li-ion) batteries are known to be a kind of battery that is often used in a lot of our modern-day smartphones.

Note that the above batteries are said to be made of  different parts, such as  an anode (a negative terminal), etc.

Therefore,  The activity that is best described as an engineering work that is linked to cell-phone batteries is option D. Improving their design to make it easier to recycle them when they are no longer useful.

Learn more about cell-phone batteries from

https://brainly.com/question/13956133

#SPJ1

Answer:

The answer is B: improving their design to make it easier to recycle them when they are no longer useful

Explanation:

i took the quiz

It's expected that by 2022 there will be almost _____ Internet users making connections.

A. 4.8 billion
B. 8.4 million
C. 48 million
D. 84 billion

Answers

Answer:

A.

Explanation:

4.8 billion is the answer

identify one of the advantages of 3d modeling?

Answers

Answer:

Hello Adam here! (UWU)

Explanation:

The advantages of 3D modeling for designers is not limited to productivity and coordination, it is an excellent communication tool for both the designer and end user. 3D models can help spark important conversations during the design phase and potentially avoid costly construction mishaps.

Happy to Help! (>.O)

All boats must have a light on the boat but there are no rules as to wear it has to be *
(10 Points)
True
False

Answers

Answer:

PLS IF YOU FIND IT HELPFUL GIVE ME BRAINLIEST

Explanation:

true

PLZ HELP ASAP WILL GIVE FREE BRAINLIEST You are operating a powerboat at night. Your green sidelight must be visible to boats approaching from which direction(s)? head-on only port (left) only head-on and starboard (right) head-on and behind

Answers

My answer to the question is Head-on and starboard (right).

For some people their defeee of honesty and integrity depends hevily on two things need and opportunities

Answers

Whenever I hold a strategic planning session, the first value that all the executives agree on is integrity. Leaders know that honesty and integrity are the foundations of leadership. Leaders stand up for what they believe in.

When driving, your hand position should be at
10 and 2
3 and 6
9 and 5
8and 4

Answers

10 and 2 is the correct answer

Technician A says diesel engines are also called compression ignition engines. Technician B says diesel engines have much higher compression ratios. Who is correct

Answers

Answer:

Both Technician A and Technician B

Explanation: Both technicians are correct.

Answer: I would say Technician A

Explanation:

Hope this helps!!!

What are some qualities of a good engineer? Explain why each characteristic is important. (2-3 sentences minimum)

Answers

A good engineer is smart.

between chain, belt and gear drive, which causes more friction?​

Answers

Answer:

All of them cause friction

Explanation:

google

A slogan promoting STEM

Answers

Answer:

science technology engineering mathematics

Explanation:

Which option is a potential environmental risk of adopting a new technology?
A shorter product life
B harm to an ecosystem
C increase in human diseases
D reduced workplace safety

Answers

Answer:

its b

Explanation:

The option that is a potential environmental risk of adopting a new technology is harm to an ecosystem. The correct option is B.

What is technology?

Technology is the implementation of knowledge of science to the feasible goals of human life, or, as it is frequently referred to, to the modification and deception of the human environment.

The majority of electronics contain non-biodegradable materials, as well as heavy metals and toxic materials such as cadmium, lead, and mercury.

These toxic materials can leach into the ground over time, contaminating the water we drink, the plants we eat, and the animals that live nearby.

Pollution, radiation, noise, land use patterns, the work environment, and climate change are all examples of environmental health risks.

Policies in sectors other than health, such as energy, industry, agriculture, transportation, and land planning, are driving these risks.

Thus, the correct option is B.

For more details regarding technology, visit:

https://brainly.com/question/9171028

#SPJ5

Different types of names given to explicit convertion in java​

Answers

Two types of name is given to explicit conversation in java .They are

1. Automatic

2. Explicit

Name two types of errors and state how each is minimized when measuring the length of objects

Answers

Answer:

Some types of errors are:

Environmental Error Instrumental Errors Observational Errors.Random Errors.

Explanation:

Ways to minimize errors are:

Double check all measurements for accuracy.Double check your formulas are correct.Make sure observers and measurement takers are well trained.Make the measurement with the instrument that has the highest precision.Take the measurements under controlled conditions.

Elizabeth has been asked to design a pool umbrella that can withstand wind speeds of up to 30 miles per hour. Now that she understands the problem, which of the following describes her next step?
A. She can test and evaluate the problem.
B. She can begin to assemble a team.
C. She is ready to design a prototype.
D. She will need to research the problem even more.

Answers

Answer:

The correct option is;

D. She will need to research the problem even more

Explanation:

In other to properly design the pool umbrella that will be reliable and meet the needs of the particular customer, she will need to carry out a basic research about the environment where the pool umbrella is to be used, the presence of other factors that can impact on an idea for the pool umbrella.

She can then proceed to create a concept about the proposed pool umbrella, which is in the form of a paper concept

She will then proceed to carry out a more detailed study based on the paper concept that will consist of concept technology and application as well as functionality.

Answer:

D. She will need to research the problem even more.

Explanation:

If she understands the problem then the next step in the design process would be to continue researching her problem.

Hope this helps!

Other Questions
9.Huge bought x notebooks. Write an expression to model the cost of thenotebooks Huge Bought0 2.50xO 25xO 32x can absolute location change If you're unsure if somethingis true, what should you do?A. Research the informationB. Trust it if you know the personC. Trust it if the person has shared accurate contentbeforeD. All of the aboveYes Anyone know the answer Who are these two people (world history) ____was formed in 1886, won wage increases and shorter work weeks for its members between 1890 and 1915. 2. Which culture lived in adobe villages in the mountains of far westTexas? Find the distance between the two points on a number line-18 and -4 Why do historians continue to gather historical evidence for even well-known events Place the following in chronological order. Reorder answers 1.People roamed the earth and did not settle in one location Reorder answers 2.People began to farm & domesticate animals Reorder answers 3.Civilization developed among groups of people Reorder answers 4.People began to live in permanent settlements Express each rational number in decimal form17)[tex] - \frac{7}{4} [/tex] You will complete the following in your teams notebook part 1 what is th function of immunoseppressant for organ transplant patient? A rectangle has a length of 12 yards less than 10 times its width. If the area of the rectangle is 880 yards A mass of gas occupies 20 cm3 at 5 degrees Celcius and 760 mm Hg pressure. What is its volume at 30 degrees Celcius and 800 mm Hg pressure? If f(x)=(3+ X) over (X -3) what is f(a+2) Help on this one. You will get 10 points Shriver Corp. borrows $25,000 from a bank and signs a two-year promissory note. What accounts will be affected by this transaction and what is the effect? Can anyone help me with question 1 and 2 ? How can nuclear energy be converted in electrical energy