in blood plasma, ph is maintained by the carbonic acid-bicarbonate buffer system. how is ph maintained when acid or base is added to the buffer system?

If the solution absorbs large amount of light, then it will transmit very less amount of light. Therefore, A high absorbance corresponds to a Low transmittance.

What is spectrophotometer?

A spectrophotometer is a device that accurately measures electromagnetic energy at specific wavelengths of light. It uses properties of light and energy to identify colors and determine the amount of each color in a ray. The two main components of a spectrophotometer are the spectrometer and the photometer.

Spectrometer: A spectrometer sends a straight beam of light through a lens to a prism, which splits it into individual wavelengths. A wavelength selector then filters only the specified wavelengths and sends them to the photometer.

Photometer: A photometer is a piece of device that detects the number of photons absorbed and transmits that measurement to a digital readout.

Therefore, A high absorbance corresponds to a Low transmittance.

To know more about spectrophotometer, check out:

https://brainly.com/question/24864511

#SPJ4

This indicates that the neuron's inside potential is 70 mV lower than its outside. At rest, the potassium ions inside the cell outnumber the sodium ions by a somewhat large margin.

Potassium ions are kept at high concentrations inside neurons whereas sodium ions are kept at high quantities outside the cell.

The potassium and sodium cations can diffuse down their concentration gradients because the cell has leaky channels that allow them to do so.

For cells to operate normally, these variations are essential. Outside of the cell, sodium ions are far more common than within.

learn more about potassium ions  refer

https://brainly.com/question/12578279

#SPJ4

Answer: Li2S  and Al because metals replace metals

Explanation:

The chemical reaction between Al₂S₃ and lithium is a single displacement reaction which forms products of lithium sulfide Li₂S and Al.

Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.

There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical reactions:

1) inorganic reactions

2)organic reactions

3) biochemical reactions

During chemical reactions atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical reaction,here:

https://brainly.com/question/14929452

#SPJ2

Answer:

linear particle accelerator

The control center of a cell is nucleus

Nucleus is the structure in a cell that contains the chromosomes. The nucleus has a membrane around it, and is where RNA is made from the DNA in the chromosomes.

The nucleus controls and regulates the activities of the cell (e.g., growth and metabolism) and carries the genes, structures that contain the hereditary information. Nucleoli are small bodies often seen within the nucleus. The matrix in which the nuclear components are suspended is the nucleoplasm.

A cell cannot function without a nucleus. This is because nucleus controls almost every activity of the cell.

learn more about nucleus from

https://brainly.com/question/141626

#SPJ1

A type of microscope known as an electron microscope uses an accelerated electron beam as its illuminating source.

The electron microscope offers benefits and drawbacks. One of the biggest drawbacks of the electron microscope, though, is that it cannot examine live samples. As a result of utilizing this microscope to view microorganisms, the following drawbacks are listed:

*Samples must be exposed to analysis in a vacuum state since other molecules in the air easily scatter electrons. This states that using this microscope to study live specimens is not possible.

*Additionally, the requirement that the sample be evaluated in a vacuum state makes it impossible to comprehend biological interactions in various bacteria.

*When investigating microorganisms, an electron microscope can only provide black-and-white images, which is not ideal.

* Equipment as expensive and specialised as electron microscopes. The employment of an electron microscope in the research could be counterproductive because most studies have little funding.

* For proper use of this technology, specialized operators, who may need years of training, are needed to operate electron microscopes.

To know more about electron microscopy

https://brainly.com/question/2172027

A substance has the chemical structure C4H9N. Compound is a saturated acyclic hydrocarbon if the index of hydrogen shortage is zero.

If everything went according to plan, you would have discovered that IHD = 4, which denotes a total of 4 rings and/or pi bonds. Pi bonds can form between two carbons (C=C, CC), two carbons and oxygen (C=O), two carbons and nitrogen (C=N, CN), two nitrogens (N=N), or two oxygen atoms (N=O). Any rings may or may not contain the N or O.

IHD=2(6)+2−62=4 I H D = 2 ( 6 ) + 2 − 6 2 = 4 . This supports the idea that benzene has one ring and three double bonds.

To know more about acyclic hydrocarbon visit:-

https://brainly.com/question/16497760

#SPJ4

Answer:

According to the graph, during year 14, revenue from online ads is approximately $4.2 million, while revenue from online ads has more than doubled revenue from printed ads (at least by year 14)

Both curves intersect between the seventh and eighth year, I would say around the middle of year 7, and both online ads and printed ads generated an approximate revenue of $2.2 million each

Explanation:

Hybridization is Sp2 if the bond angle between two adjacent hybrid orbitals is 180 degrees.

What exactly is an orbital?

How do orbitals get started?

To know more about Orbitals click:

brainly.com/question/18914648

#SPJ4

the pH at the equivalence point in the titration of 25.6 ml is.

=12×14+12×3.74+12log 0.1=8.37.

The weak acid salt hydrolysis determines the pH at the equivalence point in the titration of weak acid with strong base.As a result, we must determine the pKb of the conjugated base, compute the concentration of OH- beginning from there, and then utilize the pH=14-pOH formula.

The pH at the equivalence point is more than 7 in a weak acid/strong base titration.This is because the mixture contains water, the neutral cation of a strong base, and the anion of a weak acid (a base).

To know more about hydroxide solution visit:

https://brainly.com/question/21904397

#SPJ4

The pressure of this sample at 27° c and at the same volume is  calculated to be 0.6 atm.

Law of Gay-Lussac states that pressure of a given mass of gas varies directly with Kelvin temperature when the volume is constant.

Given that the volumes of the two states are equal. At constant volume, we use the Gay-Lussac equation:

As, P₁/T₁ = P₂/T₂

Given P1= 0.8 , T1= 127°

and T2= 27°

Now, (0.8)/(127+273) = (P₂)/(27+273)

We get, P₂ = 0.6 atm

The pressure of this sample at 27° c and  at same volume is 0.6 atm.

To know more about Gay-Lussac equation, refer

https://brainly.com/question/8350750

#SPJ4

Answer:

c. decomposition

Explanation:

it formula is splitting between O2 and 2H2O

Isotopes are any of two or more forms of an element where the atoms have the same number of protons, but a different number of neutrons within their nuclei. Thus, isotopes have the same atomic number but a different mass number.

In an atom, there are three components called subatomic particles as follows:

In a neutral atom, the number of protons, which is the atomic number, equate the number of electrons.

According to this question, the transparent subatomic particle inside the atom's nucleus is proton while the blue colored particle is the neutron.

In atom A, there are 3 protons, hence the atomic number of atom A is 3. However, in atom B, the number of protons and neutrons are 4 and 3 respectively, hence, the mass number i.e. protons + neutrons is 7.

Learn more about isotope at: https://brainly.com/question/12955625

#SPJ1

Half life Of Radioactive Element is 18 days

Percentage of original sample remained after 108 days is 1.5625%

The amount of time needed for a reactant to achieve half of its starting concentration or pressure is known as the half-life of a reaction. The half-life for a first-order reaction is concentration-independent and stable over time.

It is denoted by the symbol ‘t1/2’ and is usually expressed in seconds.

Given;

t 1/2 = 18 days;

t = 108 days;

Amount of remaining radioactive element

R = [tex]\frac{Ro}{2^n}[/tex], where n = [tex]\frac{t}{t1/2}[/tex]

⇒n= 108/18

n= 6;

so,

[tex]\frac{R}{Ro}[/tex] = [tex]\frac{1}{2^6}[/tex]

= 0.015625

⇒ Percentage of original sample remained , [tex]\frac{R}{Ro}[/tex] × 100 = 1.5625 %

Half life Of Radioactive Element is 18 days

Percentage of original sample remained after 108 days is 1.5625%

To refer more about Half life of a reaction visit:

https://brainly.com/question/14936355

#SPJ4

The product of the combustion reaction of lithium is = Lithium Oxide

Lithium-like elements such as sodium and potassium are always stored in air-tight storage to avoid exposure to the air because they start a reaction with the gases present in the atmosphere to avoid this these elements are stored in oil (Lithium in fact float on the oil but the reaction is prevented).

When the process of combustion of lithium starts, a strong red-tinted flame is observed because of its burning.

The following equation shows what happens during the combustion of Lithium in the presence of Oxygen-

              4Li + [tex]O_{2}[/tex]  →  2[tex]Li_{2}[/tex]O

To learn more about Lithium Combustion,

https://brainly.com/question/9816962

The element most likely have Low electronegativity and low ionization energy.

Low electronegativity:

The lower left corner of the periodic table contains elements with low electronegativities, which tend to lose electrons in chemical processes. The electronegativity of an atom is not a straightforward, stable feature that can be directly evaluated in a single experiment, in contrast to ionization energy or electron affinity.

Low ionization energy:

Ionization energy values over a certain threshold indicate strong nuclear and electron attraction. That attraction's magnitude will be determined by: The nucleus' charge is as follows: The nucleus becomes more positively charged and more strongly attracts electrons as there are more protons present.

Hence, the element most likely have Low electronegativity and low ionization energy.

To learn more about ionization energy click:

https://brainly.com/question/18640183

#SPJ4

The average atomic mass of the element which is represented in the above diagram is 16.

An element is defined as a substance which cannot be split into simpler forms by ordinary chemical process. There are different categories of elements including the metals, nonmetals and metalloids.

That being said, the oxygen is a chemical element which belongs to group 6 and period 2 in the periodic table, has valence electron of 6, and an average mass of 16. In addition to this, oxygen is a metal. Some few examples of other chemical elements include:

So therefore, it can be deduced from the explanation given above that oxygen is a chemical element which is diatomic.

Complete question:

What is the average atomic mass of the element represented above

a. 8

b. 16

c. 32

d. 64

Read more atomic mass:

https://brainly.com/question/3187640

#SPJ1

When an atom X of an element in Group 1 reacts to become X+, number of filled energy levels decreases. The correct option is D.

An atom's electrons typically fill all of the lowest energy levels first, followed by the higher ones. The electrons are in the lowest energy state possible thanks to this filling order.

Atom X will lose an electron to become atom [tex]X^{+1}[/tex], since the atom is neutral and the electron is unit negatively charged. While the nonmetal picks up one or more electrons, the metal loses one or more. The amount of electrons lost is a function of the metal's position in the periodic table. Elements in group 1 lose one electron, while those in group 2 lose two. When one electron is lost, a positive charge results because there are more protons than electrons. With the negative charge, the opposite occurs.

Know more about electrons and energy level at:

https://brainly.com/question/10763798

#SPJ1

The complete question is:

When an atom X of an element in Group 1 reacts to become X+ -

A mass number of X increases.

B atomic number of X decreases.

C charge of the nucleus increases.

D number of filled energy levels decreases.

E=2.1781018J is the ratio for an atom energy (n2Z2). wavelength of light required to shift an electron in a hydrogen atom between level n=1 to n=2.

The wavelength, which will also apply to troughs, is the separation between two wave crests. The frequency is measured in frames a second (Hz), which is the quantity of vibrations that cross a specific area in a second (Hertz).

When wavelength is expressed in metres, 1/ represents the amount of waves in a wave train that can be discovered in a duration of one metre, or for the number in a height of one centimeter if wavelength is expressed in centimeters. Its amplitude of the wave of the spectra line is the name given to this figure.

To know more about wavelength visit:-

https://brainly.com/question/27353508

#SPJ4

According to the given statement The amount of heat that water absorbs is 878.64 J.

Equation q = -CT, where C seems to be the calorimeter's heat capacity and T is the temp change, can be used to determine how much heat is released during the reaction. Since the combustion takes place at a fixed volume, the reaction's q is equal to E.

Amount of water = m = 75.0 g

Specific heat capacity of water = c = 4.184 J /g⁰C

Initial temperature of water = T = 23.0⁰C

Final temperature of water = T' = 20.2⁰C

The phrase for how much heat water absorbs is presented below.

q = mcΔT

q = 75.0 g * 4.184 J /g⁰C * (23.0 - 20.2)⁰ C

q = 878.64

The amount of heat that water absorbs is 878.64 J

To know more about Calorimeter constant visit:

https://brainly.com/question/4802333

#SPJ4

Answer:

Density = 3 g/cm³

Explanation:

Density is a ratio which compares an object's mass per every 1 unit volume. Grams is a unit of mass and cm³ is a unit of volume. Since you have been given values for both a mass and volume, you can use them to determine the density.

Density = g/cm³                                     <----- Density units

Density = 90 g / 30 cm³                        <----- Insert values

Density = 3 g / 1 cm³                              <----- Simplify

Density = 3 g/cm³

The balanced chemical equation for the reaction is as follows:

6 Li[s] + [tex]N_{2}[/tex][g] = 2[tex]Li_{3}[/tex]N[s]

Meaning of the reaction is that 6 moles of lithium reacts with nitrogen to form two moles of lithium nitride.

The product formed is:

Highly flammable and reactive chemical and a Dangerous fire and explosion hazard.

Lithium Nitride can affect you when breathed in and may be absorbed through the skin.

Contact can severely irritate and burn the skin and eyes. Breathing Lithium Nitride can irritate the nose and throat.

To know more about lithium nitride here

https://brainly.com/question/26279041

#SPJ4

Answer:

The "control" is a group that continues under normal conditions in an experiment.

Explanation:

The control group regulates the experiment and serves as a reference point for changing variables.

When the ice and water mixture has come to a uniform temperature of 0°C, then 50.3 grams of ice has melted.

Melting of ice is the change in state of water from solid to liquid. As, it involves change in state of water without forming any new substance, it is a physical change.

where, q is heat released and m is mass of water -- 100 g

c is specific heat capacity of water -- 4.186 J/g.°C

T is change in temperature = 60-100 = -40

So, q = 100 * 4.186 * -40

Thus, q = -16744j

Amount of heat absorbed by ice = -q = -(-16744) J

= 16744 J

H = q/m

q is the amount of heat absorbed = 16744 J

m is the mass of ice melted

H is the heat of fusion = 333 J/g

so, 333J/g = 1674/ m

Now, m = 1674 / 333

= 50.3g

Therefore, 50.3 g of ice will have melted.

To know more about melting of ice, refer

https://brainly.com/question/23557049

#SPJ4

Hello,

I hope you and your family are doing well!

To calculate the ∆H for the solution process of NaOH, you can use the equation:

∆H = q/n

where q is the heat absorbed or released during the process, and n is the number of moles of solute that are dissolved.

To find the heat absorbed or released during the process, you can use the equation:

q = m * C * ∆T

where m is the mass of the solvent (water), C is the specific heat of the solvent, and ∆T is the change in temperature of the solvent.

Substituting the given values into this equation gives us:

q = 100.0 g * 4.18 J/g-K * (37.8°C - 21.6°C) = 10,019 J

To find the number of moles of NaOH dissolved, you can use the molar mass of NaOH:

n = 6.50 g / 39.9968 g/mol = 0.1625 mol

Substituting these values into the equation ∆H = q/n gives us:

∆H = 10,019 J / 0.1625 mol = 61,726 J/mol

Converting this to kJ/mol gives us:

∆H = 61,726 J/mol / 1000 J/kJ = 61.726 kJ/mol

Therefore, the ∆H for the solution process of NaOH is approximately 61.726 kJ/mol.

Please rate this answer 5 stars and brainliest if you find it helpful!

Happy Holidays & New Year!

The total number of molecules that are present in 4.6×[tex]10^{3}[/tex] mg of NaCl is 0.47×[tex]10^{23}[/tex]

Atomic masses:

Na=23  , Cl=35.5

The molar mass of NaCl=58.5

1gm of NaCl contains=1/58.5 moles of NaCl

And,

      1gm of NaCl contains=1/58.5×6.022×[tex]10^{23}[/tex] molecules of NaCl

4.6x[tex]10^{3}[/tex] mg =(4.6x[tex]10^{3}[/tex]x[tex]10^{-3}[/tex] gm) of NaCl contains= [tex]\frac{1}{58.5}[/tex] ×6.022×[tex]10^{23}[/tex]×4.6

                                                                              =0.017×27.70×[tex]10^{23}[/tex]

                                                                              =0.47×[tex]10^{23}[/tex]

Therefore the total number of molecules present in 4.6×[tex]10^{3}[/tex] mg NaCl is 0.47×[tex]10^{23}[/tex]

Learn more about molar mass:

https://brainly.com/question/28447857

The major product of the reaction is (2S,3R)-3-methoxy - 3-methylpentan-2-ol

Epoxide reacts with methanol in the presence of sulfuric acid.

In this chemical reaction, methanol act as nucleophile and sulfuric acid act as catalyst.

What are Epoxides?

Epoxides are a type of cyclic ether in which a three-membered ring is formed by a oxygen atom bonded to two adjacent carbon atoms. They are also known as oxiranes. Epoxides are used in a variety of applications, including as chemical intermediates, catalysts, and as raw materials for a range of products.

What is sulfuric acid?

Sulfuric acid is a strong, corrosive acid that is used in a variety of industrial applications. It is also known as battery acid, as it is used in car batteries to facilitate a chemical reaction. Sulfuric acid is colorless and odorless, and is composed of two hydrogen atoms, one sulfur atom, and four oxygen atoms.

To know more about Sulfuric acid,

https://brainly.com/question/21691816

#SPJ4

The volume of sulfur tetrafluoride gas that is collected is 13.17L.

The volume of an ideal gas can be calculated using the following ideal gas equation;

PV = nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

T = temperature (K)

R = gas law constant

According to this question, a reaction occurs at 32.0°C and evolves 526mmol of sulfur tetrafluoride gas. The volume of sulfur tetrafluoride gas collected assuming the pressure in the room is exactly 1 atm can be calculated as follows:

1 × V = 0.526 × 0.0821 × 305

V = 13.17L

Therefore, 13.17L is the volume of the gas.

Learn more about volume at: https://brainly.com/question/24189159

#SPJ1

This chemical molecule consists of 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms.There are 24 atoms in all.Six C atoms, twelve H atoms, and six O atoms make up one glucose molecule.

Six-carbon glucose is broken down during glycolysis into two pyruvate molecules each one with three carbons.In the glycolysis summary below, glucose transforms to two pyruvate molecules, producing two ATP molecules and two NADH molecules.

D-glucose, D-fructose, D-galactose, & D-mannose are the four most prevalent six-carbon sugars (hexoses).

To know more about Atoms visit:

https://brainly.com/question/13654549

#SPJ1