In a statistics course, a linear regression equation was computed to predict the final exam score from the score on the first test. the equation was y=10+0.9x where y is the final exam score and x is the score on the first test. Bill scored a 90 on the first test and his residual was -2. what was his score on the final exam?

a. 89
b. 91
c. 93
d. 90
e. not enough information

The proof principle that you are describing is known as induction. Induction is a method of proof that is used to establish that a property holds for all natural numbers (or, more generally, for all elements of a well-ordered set).

The basic idea behind induction is as follows:

First, you start with a base case, which is a specific natural number (usually 0 or 1) for which you can directly prove that the property holds.

Next, you assume that the property holds for some natural number n. This is known as the induction hypothesis.

Using the induction hypothesis, you then prove that the property also holds for the natural number n+1. This is known as the induction step.

Since you have already established that the property holds for the base case, and you have shown that if it holds for one natural number, it must also hold for the next natural number, it follows that the property holds for all natural numbers.

Induction is a very powerful proof technique and is used extensively in mathematics to prove theorems about the properties of natural numbers and other well-ordered sets.

To know more about induction visit :

https://brainly.com/question/13540448?referrer=searchResults

#SPJ4

At a continuous speed of 20 miles per hour, it takes 2 minutes to cross this bridge.

The unitary method is used to calculate the value of a single unit and then multiply that value by itself in order obtain the desired value. Unitary refers to a single, unique, or solitary unit. As a result,

this method's objective is to establish values in terms of a single unit. If a car can drive 44 kilometer two litres of gas, for instance, the unitary approach can be used to calculate how many kilometers it can travel on one litre of gas. The value of a single unit is determined by the unitary technique, and also the value of the required quantity of units can then be calculated using this value.

given,

 0.76 miles = (4024/5280) miles

Speed =20 miles per hour

Time: =(Distance / Speed) = (0.76/20)

= 0.038 ( in hours )

into minutes = 2 min

At a continuous speed of 20 miles per hour, it takes 2 minutes to cross this bridge

To know more about unitary method visit:

https://brainly.com/question/28276953

#SPJ4

A circle of radius 4.6 cm is drawn with its center at the origin. The diameter XY of the circle is also drawn, along with two chords XP and YQ connecting the endpoints of the diameter.

A circle of radius 4.6 cm is drawn with its center at the origin, which is labeled as O. The diameter XY of the circle is also drawn and labeled, with the endpoints X and Y. Two chords XP and YQ are then drawn connecting the endpoints of the diameter. The chord XP starts at X and ends at P, while the chord YQ starts at Y and ends at Q. This diagram demonstrates the idea of a circle and its diameter, as well as how two chords can be drawn from the same two endpoints of a diameter. The circle and its diameter can also be used to calculate the circumference of the circle and the length of the diameter.

Circumference of circle = 2 * π * 4.6 = 28.96 cm

Length of diameter = 2 * 4.6 = 9.2 cm

Learn more about radius here

https://brainly.com/question/15047456

#SPJ4

The total annual salary with a festive bonus is Rs (12r+2000)

In maths, multiply means the repeated addition of groups of equal sizes.

Given that, there is an annual salary at r rupees per month along with a Christmas bonus of, Rs 2000.

Here, a person is getting monthly salary  = Rs r

Therefore, his annual salary = Rs r × 12

= Rs 12r

He is also getting a bonus for Christmas = Rs 2000

So, in total, he will get =  Rs (12r+2000)

Hence, The total annual salary with a festive bonus is Rs (12r+2000)

For more references on multiplication, click;

https://brainly.com/question/5992872

#SPJ1

Answer:

Slope: 3

y-intercept: ( 0, −5)

Graph a solid line, then shade the area above the boundary line since

y is greater than 3x −5.

y ≥ 3x −5

Answer:

7

Step-by-step explanation:

4+3=7

7-4=3

7-3=4

The equation in the form at point (3m, 2m) is [tex]$\ln y^2+y=2 x-2.62$[/tex], the magnitude of the velocity is 7.81 m/s, the direction of the velocity is 50.19°.

Consider the flow field:

u=2+y & v=2 y

Determine the streamline equation by using the following equation:

[tex]& \frac{d x}{u}=\frac{d y}{v} \\ \frac{d x}{2+y}=\frac{d y}{2 y} \\\\& \int d x=\int\left(\frac{2+y}{2 y}\right) d y \\\\& x=\ln y+\frac{y}{2}+C[/tex]

(A)

Since the stream line passes through (3,2).

[tex]$$\begin{aligned}& x=\ln y+\frac{y}{2}+C \\& 3=\ln 2+\frac{2}{2}+C \\& C=2-\ln 2 \\& C=1.31\end{aligned}$$[/tex]

Substitute the value of C in equation (1).

[tex]& x=\ln y+\frac{y}{2}+C \\\\& x=\ln y+\frac{y}{2}+1.31 \\\\& 2 x-1.31 \times 2=2 \ln y+y \\\\& \ln y^2+y=2 x-2.62[/tex]

Therefore, the equation of streamline equation at point (3m, 2m) is [tex]$\ln y^2+y=2 x-2.62$[/tex].

(B).

Calculate the magnitude of the velocity of a particle located at point (5m , 3m).

[tex]V & =\sqrt{u^2+v^2} \\\\& =\sqrt{(2+y)^2+(2 y)^2} \\\\& =\sqrt{(2+3)^2+(2 \times 3)^2} \\\\& =\sqrt{5^2+6^2} \\\\& =7.81 \mathrm{~m} / \mathrm{s}[/tex]

Therefore, the magnitude of the velocity of a particle located at point (5m , 3m) is 7.81m/s.

(C).

Calculate the direction of the velocity of a particle located at point (5m , 3m) measured counterclockwise from the positive x-axis is

[tex]\tan \theta & =\frac{v}{u} \\\\& =\frac{2 y}{2+y} \\\\& =\frac{6}{5} \\\\& =50.19^{\circ}[/tex]

Therefore, the direction of the velocity of a particle located at point (5m , 3m) is 50.19°.

For more such questions on magnitude and velocity

https://brainly.com/question/18084516

#SPJ4

A flow field for a fluid is described by u=(2+y) m/s and v=(2y) m/s, where y is in meters.

      A.) Determine the equation of the streamline that passes through point (3m, 2m). Write the equation in the form

 x={x(y)}, where y is in meters.

      B.) Find the magnitude of the velocity of a particle located at point (5m , 3m).

      C.) Find the direction ? of the velocity of a particle located at point (5m , 3m) measured counterclockwise from the positive x axis.

Answer:

y = 2x - 3

Step-by-step explanation:

A (0,-3)

B (2,1)

slope = (-3-1)/(0-2)

-4/-2

2

y intercept = -3

As per the concept of unitary method, the another way to express 8 feet is 2 [tex]\frac{2}{3}[/tex] yards.

In math, unitary method is known as a way of finding out the solution of a problem by initially finding out the value of a single unit, and then finding out the essential value by multiplying the single unit value.

Here we have given that a clothesline rope is 8 feet long.

Now we need to find another way to express 8 feet

We know that the formula to convert the measurement it to divide the length by the conversion ratio.

As we know that one yard is equal to 3 feet, then we can use this simple formula to convert is written as

yards = [tex]\frac{feet}{3}[/tex]

Then we have to convert the improper fraction into mixed fraction from, then we get,

2[tex]\frac{2}{3}[/tex] yards

For such more questions about unitary method:

brainly.com/question/28276953

#SPJ4

Answer:

Step-by-step explanation:

Given angles of elevation of 10° and 50° measured 10 seconds apart from an observation point 1.5 miles away, you want to know the vertical change in distance, and the average speed of the shuttle between the two observations.

The tangent relation tells you ...

  Tan = Opposite/Adjacent

Then the height of the shuttle at the observed angles was ...

  Opposite = Tan · Adjacent

  h1 = tan(10°)·(1.5 mi) ≈ 0.264490 mi

  h2 = tan(50°)·(1.5 mi) ≈ 1.787630 mi

The amount of vertical travel in the 10-second interval was ...

  1.787630 mi -0.264490 mi = 1.523240 mi

The space shuttle traveled about 1.523 miles vertically in the 10-second interval.

In miles per second, the average speed during that time was about ...

  (1.523 mi)/(10 s) = 0.1523 mi/s

In miles per hour, that's about ...

  (0.1523 mi/s)(3600 s/h) ≈ 548 mi/h

The solutions for the given equation is (1, 12), (2, 18), (3, 24), (4, 30) and (5, 36).

In mathematics, an equation is a formula that expresses the equality of two expressions, by connecting them with the equals sign =.

The given equation is y=6x+6.

The solution of an equation is the set of all values that, when substituted for unknowns, make an equation true.

Substitute, x=1, 2, 3, 4, 5,.....

When x=1

y=6x+6

y=12

When x=2

y=6x+6

y=6(2)+6

y=18

When x=3

y=6x+6

y=6(3)+6

y=24

When x=4

y=6x+6

y=6(4)+6

y=30

When x=5

y=6x+6

y=6(5)+6

y=36

Therefore, the solutions for the equation is (1, 12), (2, 18), (3, 24), (4, 30) and (5, 36).

To learn more about the solution of an equation visit:

https://brainly.com/question/14506845.

#SPJ1

Answer:

-3<c<11/2

Step-by-step explanation:

-7<2c-1

-7+1<2c

-6<2c

-3<c

and

2c-1<10

2c<10+1

2c<11

c<11/2

Final answer (combine both):

-3<c<11/2

a) The probability that an apple from the tree has a weight greater than 90 grams is of: 0.2514 = 25.14%.

b) i) The p-value of the test is of: 0.0045.

b) ii) The conclusion of the test is given as follows: There is enough evidence to conclude that the mean weight of apples from tree A is greater than the mean weight of apples from tree B, as the p-value of the test is less than the significance level.

The z-score of a measure X of a variable that has mean symbolized by [tex]\mu[/tex] and standard deviation symbolized by [tex]\sigma[/tex] is obtained by the rule presented as follows:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The mean and the standard deviation of the weight of the apples are given as follows:

[tex]\mu = 85, \sigma = 7.5[/tex]

The probability that an apple from the tree has a weight greater than 90 grams is one subtracted by the p-value of Z when X = 90, hence:

Z = (90 - 85)/7.5

Z = 0.67

Z = 0.67 has a p-value of 0.7486.

1 - 0.7486 = 0.2514 = 25.14%.

For each sample, the mean and the standard error are given as follows:

Hence, for the distribution of differences, the mean and the standard error are given as follows:

The test statistic is given by the division of the mean by the standard error of the distribution of differences, hence:

z = 4.2/1.61 = 2.61.

Using the z-table, with z = 2.61, the p-value is of:

0.0045.

As the p-value is less than the significance level, there is enough evidence to conclude that the mean weight of apples from tree A is greater than the mean weight of apples from tree B.

More can be learned about the normal distribution at https://brainly.com/question/25800303

#SPJ1

Answer:

Step-by-step explanation:

Lacey you can do this one  :D

J = H  ( b/c of red marks)

180= 128 + ∠j

52 = ∠j

t = ∠j

t = 52

180 = s + 2*t

180 = s + 2*52

180 = s + 104

180-104 =s

76 = s

Answer:

Below

Step-by-step explanation:

the difference between 51.2 and a number is  :   51.2 - x

 Now multiply this by 6  :   6 x (51.2-x)    

     and this equals 68.3  :      6 x (51.2-x) = 68.3

By combination, Three men and three women must be chosen among the six men and seven women that are available. necessary number of methods =  [tex]^6C_3 * ^7C_3 = 20 * 35 = 700.[/tex]

The sequence of the selection is irrelevant since a combination in mathematics is a selection of items from a set having various members. Regardless of the sequence in which the items were chosen, a mathematical approach known as a combination may be used to calculate the number of alternative arrangements within a collection of objects. Any order can be chosen by a combination. Combinations and permutations are two alternative strategies to divide up a collection of items into subsets in mathematics. The subset's elements can be listed in any order in a combination. In a permutation, the components of a subset are listed in a certain order.

Three men and three women must be chosen among the six men and seven women that are available. necessary number of methods =  [tex]^6C_3 * ^7C_3 = 20 * 35 = 700.[/tex]

To know more about combination visit:
https://brainly.com/question/19692242

#SPJ4

To find the constant of variation in this situation, we need to use the formula for inverse variation, which is:

y = k / x

where y is the number of cigarettes a person smokes, x is the length of time they can hold their breath, and k is the constant of variation.

In this case, we are given that y = 10 cigarettes and x = 50 seconds. We can solve for k by multiplying both sides of the equation by x:

k = y * x

= 10 cigarettes * 50 seconds

= 500

Therefore, the constant of variation in this situation is 500. This means that for every 50 seconds of breath-holding time, a person will smoke approximately 10 cigarettes.

Simple random sampling is a good way because he will have a more representative sample if he chooses randomly. which is the correct answer would be an option (B).

A sample is randomly chosen from the population in basic random sampling, guaranteeing that each person has an equal chance of being chosen.

Simple random sampling is a good way for a librarian to check a sample of books from the library to get an idea of how many need replacing because it will provide a more representative sample.

In simple random sampling, a sample is selected from the population at random, ensuring that each member of the population has an equal chance of being selected. This means that the sample will accurately represent the characteristics of the population as a whole.

Thus, He will have a more representative sample if he chooses randomly.

To learn more about simple random sampling click here:

https://brainly.com/question/13219833

#SPJ1

The value of the composite function is 2x - 15

A function can be defined as a rule, law ore equation that explicitly shows the relationship between two variables.

These variables are called;

From the information given, we have the functions;

To determine the composite function (fog)(x), we have to substitute the value of g(x) as the variable 'x' in the function, f(x), we have;

(fog)(x) = 2 - (18 -2x) + 1

Now, expand the bracket

(fog)(x) = 2 - 18 + 2x + 1

collect like terms

(fog)(x) = 2x - 15

Hence, the function is 2x - 15

Learn more about functions here:

https://brainly.com/question/25638609

#SPJ1

Answer:

Wdym what to put for 1 and 2??

Step-by-step explanation:

there’s no picture on my screen ;-;

Answer: 49/60 mins.

Step-by-step explanation:

First lap time = 5/6 minute

Second lap time = 11/12 minute

Third lap = ?

To find the 3rd lap mins, we need to find 5 x 6, which is 30. Then, we need to find 1 1/12 more than 30. Then, when we get that answer, we need to find 1 1/10 fewer mins to get the 3rd lap time. If you do it all right, you should end up with 49 mins or 49/60 mins as a fraction (The denominator was changed to 60 to make the problem more realistic and easier) I hoped this helped.

If the two expression be 14 - 3a and 7a - 9 then the combined term exists 4a + 5.

A mathematical expression is a phrase that has a minimum of two numbers or variables and at least one mathematical operation. It is possible to multiply, divide, add, or subtract in math. An expression has the following structure: Expression: (Math Operator, Number/Variable, Math Operator).

The addition, subtraction, multiplication, and division mathematical operations are used to create mathematical expressions.

Let the two expression be 14 - 3a and 7a - 9

Expression one - 14 - 3a

Expression two - 7a - 9

Combining both two terms

14 - 3a + (7a - 9)  = 14 - 3a + 7a - 9

simplifying the above equation, we get

= (-3a + 7a) + 114 - 9)

=  4a + 5

If the two expression be 14 - 3a and 7a - 9 then the combined term exists 4a + 5.

To learn more about expression refer to:

https://brainly.com/question/723406

#SPJ1

Using the fact that all points on a circle are equidistant to its center, we will see that:

a =  -3 ±√21

All the points on a circle are equidistant to its center. Here the center is at (-3, -2), and we know that (0, -6) is on the circle.

The distance between these two is:

d = √( (-3 - 0)^2 + (-2 + 6)^2) = 5

Then the distance between (a, 0) also should be 5 units, so:

5 = √( (-3 - a)^2 + (-2 - 0)^2)

5 = √( (-3 - a)^2 + 4)

5^2 = (-3 - a)^2 + 4

25 - 4 = (-3 - a)^2

21 = (-3 - a)^2

±√21 = -3 - a

a = -3 ±√21

these are the two possible values of a.

Learn more about circles:

https://brainly.com/question/25871159

#SPJ1

A coordinate system is a two-dimensional number line, for example, two perpendicular number lines or axes.

This is a typical coordinate system:

coordinate plane1

The horizontal axis is called the x-axis and the vertical axis is called the y-axis.

The center of the coordinate system is called the origin. The axes intersect when both x and y are zero. The coordinates of the origin are (0, 0).

An ordered pair contains the coordinates of one point in the coordinate system. That is named by its ordered pair of the form of (x, y).

The first number corresponds to the x-coordinate and the second to the y-coordinate.

To graph a point, we have to draw a dot at the coordinates that correspond to the ordered pair. It is one of the best ways to start at the origin.

The x-coordinate shows how many steps have to take from positive to negative on the x-axis, the same as the y-coordinate tells how to have many steps from positive to negative on the y-axis.

To know more about the coordinate planes:

https://brainly.com/question/25072940

#SPJ4

Answer:

- 4, - 3, - 2, - 1, 0, 1

Step-by-step explanation:

- 15 < 3n < 6 ( divide each interval by 3 )

- 5 < n < 2

then integer value of n are - 4, - 3, - 2, - 1, 0, 1

To determine the number and type of solutions to the quadratic equation x^2 - x = -1/4, we can use the discriminant, which is the part of the quadratic formula that determines the number of solutions. The quadratic formula is:

x = (-b +/- sqrt(b^2 - 4ac)) / (2a)

where a, b, and c are the coefficients of the quadratic equation. In this case, the coefficients of the equation are a = 1, b = -1, and c = -1/4. Plugging these values into the formula gives us:

x = (1 +/- sqrt(1^2 - 4(1)(-1/4))) / (2(1))

x = (1 +/- sqrt(1 + 1)) / 2

x = (1 +/- sqrt(2)) / 2

Therefore, the quadratic equation has two solutions: x = (1 + sqrt(2)) / 2 and x = (1 - sqrt(2)) / 2. These solutions are both real numbers.

The result of the subtraction of the algebraic expression (5.62n − 2.8) − (4 + 14.3n) is -8.68n - 6.8 Third option is correct.

What is algebraic expression?

An algebraic expression is a mathematical phrase that uses numbers, operations such as addition and multiplication, and variables (letters or symbols that represent unknown values). Algebraic expressions are used to represent real-world problems and situations. Algebraic expressions can be combined and simplified, and they can also be used to solve equations. Algebraic expressions can be used to describe anything from the area of a circle to the cost of a car. Algebraic expressions are an essential part of algebra, and they are used to help students understand mathematics concepts in a more concrete way.

The given algebraic expressions are 5.62n - 2.8 and 4 + 14.3n

Now,

(5.62n − 2.8) − (4 + 14.3n)

5.62n - 2.8 - 4 - 14.3n

-8.68n - 6.8

Third option is correct

To learn more about algebraic expression, refer to the link-

https://brainly.com/question/2164351

#SPJ1

Answer:

the answer is b

Step-by-step explanation:

Answer:

mn/100

Step-by-step explanation:

m% = m/100

m% of n = m% × n = m/100 × n = mn/100

I believe the answer is x= 12

Answer:

11.25

Step-by-step explanation:

If the painter used 2.5 liters of paint every hour, then in 5.5 hours he would have used 2.5 * 5.5 = <<2.5*5.5=13.75>>13.75 liters of paint.

If he had 25 liters of paint to begin with and used 13.75 liters of paint, he would have 25 - 13.75 = <<25-13.75=11.25>>11.25 liters of paint left. Answer: {11.25}.

The painter had 11.25 L paint left.

The unitary method is a technique for solving a problem by first finding the value of a single unit, and then finding the necessary value by multiplying the single unit value.

Given here in 1 hour he uses 2.5 L of paint

          then in 5.5 hours he uses 2.5 × 5.5 = 13.5 L

Therefore quantity of paint left is = 25 - 13.5 = 11.5 L

Hence, The painter had left  11.25 L .

Learn more about the unitary method here:

https://brainly.com/question/22056199

#SPJ2