In a social group, 62 members enjoy dancing and 28 members enjoy hiking. If each of the 75 members in the group enjoys dancing or hiking, how many members enjoy both dancing and hiking?

Let's call the length of the rectangle "l" and the width "w". We know that the diagonal of the rectangle is 60 inches, and that it creates angles of 30 degrees and 60 degrees in the corners of the rectangle.

Using trigonometry, we can relate the sides of the rectangle to its diagonal and the angles formed by the diagonal. Specifically, we can use the sine and cosine functions to relate the sides to the angles:

sin(30) = w/60 and cos(30) = l/60

sin(60) = l/60 and cos(60) = w/60

Simplifying each equation, we get:

w = 30√3 and l = 30

Therefore, the area of the rectangle is:

Area = l x w = (30)(30√3) = 900√3 square inches.

Hence, the area of the rectangle in simplified radical form is 900√3 square inches.

The integer that represents the amount of time in seconds the ball takes to reach the end of the ramp is 9.

To find the amount of time in seconds it takes for the ball to reach the end of the ramp, we need to divide the total distance by the rate of descent.

The total distance the ball needs to travel is 18 feet, and it descends 2 feet each second.

Therefore, the time it takes for the ball to reach the end of the ramp can be calculated as follows:

time = distance / rate

time = 18 feet / 2 feet/second

time = 9 seconds

So, the integer is 9.

Read more about speed at

https://brainly.com/question/24571540

#SPJ1

Answer:

highest: $1,438

lowest: $1,062

Step-by-step explanation:

The highest and lowest points are adding $188 and subtracting $188 from her brother's amount.

So, to find the highest point, add $188 to $1,250, which is $1,438.

To find the lowest point, subtract $188 from $1,250, which is $1,062.

Hope this helps ;)

Answer:

12

Step-by-step explanation:

4 x 4= 16 so 4 x 3=12 and 3/4 = 4 x 3

The value of x after simplifying the given equation is approximately 1295.6.

To solve for x in the equation

(679/1327) + (677-x)/1329 + (675-x)/1331 + (673-x)/1333 = 4

We can start by simplifying the fractions and combining like terms

679/1327 + (3x - 1010)/((1329)(1331)(1333)) = 4

Multiplying both sides by (1327)(1329)(1331)(1333), we get

(679)(1329)(1331)(1333) + (3x - 1010)(1327)(1331)(1333) = 4(1327)(1329)(1331)(1333)

Expanding the products and simplifying, we get

(679)(1329)(1331)(1333) + (3x)(1327)(1331)(1333) - 1010(1327)(1331)(1333) = 4(1327)(1329)(1331)(1333)

Adding 1010(1327)(1331)(1333) to both sides, and dividing both sides by (3)(1327)(1331)(1333), we get

x ≈ 1295.6

To know more about equation here

https://brainly.com/question/28243079

#SPJ1

Answer:

7/4

Step-by-step explanation:

i am sooo sure that  the answer is 1.75

The calculated Social Security tax is $ 6621.60 on the maximum taxable earning, that is $106800 on the rate of 6.2% and Medicare tax is  $1812.50 on the annual salary, that is $125,000 on the rate of 1.45%.

Hence option d is the correct option.

The annual salary of an individual is given as  $125,000.

Medicare tax is levied on the annual salary of an individual, that is on $125,000. It is given as 1.45 % on $125,000.

The maximum taxable earnings is $106,800 and Social Security tax is levied on this $106,800. It is given as 6.2% on $106,800.

Thus, applying basic rule of percentage calculation we get,

Earnings from Social Security tax  = $(6.2% of 106800)

= ${(62/100*10)(106800)

= $ 6621.60

Earnings from Medicare tax = $(1.45% of 125000)

=  $(145/100*100)(125000)}

= $1812.50

Hence option d Social Security tax: $6,621.60, Medicare tax: $1,812.50 is the correct option.

To know more about percentage calculation here

https://brainly.com/question/29541337

#SPJ4

The simplified expression using rational numbers is 82.25.

First, let's start by defining what a rational number is. A rational number is any number that can be expressed as a ratio of two integers, where the denominator is not zero. For example, 2/3, 5, and -7/2 are all rational numbers.

Now, let's simplify the expression using rational numbers. We can start by simplifying (5.5)² and 9(5.5)².

(5.5)² is equal to 30.25, which is a rational number because it can be expressed as 121/4.

9(5.5)² is equal to 9 times 30.25, which is equal to 272.25. This is also a rational number because it can be expressed as 109/4.

Next, let's simplify √5.75. To do this, we need to express the square root as a rational number. We can do this by rationalizing the denominator.

To rationalize the denominator, we multiply both the numerator and denominator of the expression by the conjugate of the denominator. In this case, the conjugate of √5.75 is √5.75.

So, 5.75√ can be simplified as follows:

5.75√ = 5.75√5.75/√5.75

= 5.75√5.75/5.75

= √5.75

Now, we can rewrite the expression as:

(121/4) + √5.75 + (109/4) + 5.75 + 9

Combining like terms, we get:

(121/4) + (109/4) + 15.75 + 9

Simplifying further, we get:

(230/4) + 15.75 + 9

= 57.5 + 15.75 + 9

= 82.25

To know more about rational number here

https://brainly.com/question/24540810

#SPJ4

Hence ,the surface area of the trapezoid is  173 [tex]ft^{2}[/tex] .

In geometry,  a quadrilateral with at least one set of parallel sides is referred to as a trapezium in American and Canadian English, or a  trapezium in British and other  forms of English. In Euclidean geometry, a trapezium is a convex quadrilateral by  definition. The bases of the  trapezium are the parallel sides.

The amount  of space that a trapezoidal prism is surface takes up is known as its surface area. A three-dimensional solid called a trapezoidal  prism is composed of two  trapezoids on opposing faces connected by four  rectangles known as the lateral faces. You will learn how to determine the surface area of a trapezoidal prism, as with  all three-dimensional shapes.

We know that ,surface area of trapezoid is,

Surface Area= [tex]\frac{1}{2}[/tex] x (sum of the lengths of the parallel sides) x perpendicular distance between parallel sides

In given figure,

∵ value of parallel sides is 10 ft and 13 ft ,

So, the sum of the lengths of the parallel sides= 10+13=23 ft

∵ perpendicular distance between parallel sides= 15 ft

∴ The Surface Area of trapezoid = [tex]\frac{1}{2}[/tex] x (sum of the lengths of the parallel sides) x perpendicular distance between parallel sides

⇒The Surface Area of trapezoid = [tex]\frac{1}{2}[/tex] x 23 x 15

⇒The Surface Area of trapezoid = [tex]\frac{1}{2}[/tex] x 345

⇒The Surface Area of trapezoid = 172.5 [tex]ft^{2}[/tex] ≅ 173 [tex]ft^{2}[/tex]

Learn more about area here:

https://brainly.com/question/25292087

#SPJ1.

In order to find the upper and lower bounds of a rounded number:

The upper and lower bounds can be found by dividing the degrees of accuracy by 2 and then subtracting and adding with the value to give the lower and upper bounds respectively.

Kindly check the above explanation inorder to know how to calculate the value as your information is incomplete

Learn more about bound on

https://brainly.com/question/28725724

#SPJ1

How does one find the upper and lower bound of a variable

She needs 74.25 ft² of glass to cover the pyramid.

To obtain the surface area of any prism, we combine the areas of all the parts that compose the prism.

The pyramid in this problem is composed as follows:

The area of the square base is given as follows:

As = 5.5² = 30.25 ft².

The area of the four triangles is given as follows:

At = 4 x 1/2 x 5.5 x 4

At = 44 ft².

Hence the surface area of the pyramid is given as follows:

S = As + At

S = 30.25 + 44

S = 74.25 ft².

More can be learned about the surface area of a pyramid at https://brainly.com/question/22744289

#SPJ1

Answer:

d Because I just took the test and got it right

The statement " Each neighborhood in DMR encompasses just the vertices and edges of a bad triangle" is false because a neighborhood in a Delaunay triangulation typically encompasses more than just the vertices and edges of a single bad triangle.

The statement is incorrect. A "bad triangle" refers to a specific type of triangle that can occur in a Delaunay triangulation, which is a type of triangulation used in computational geometry. A bad triangle is a triangle that violates the Delaunay condition, which requires that the circumcircle of the triangle contains no other vertices of the triangulation.

While a Delaunay triangulation can be used to partition a set of points into a set of triangles, each neighborhood in the triangulation typically encompasses more than just the vertices and edges of a single bad triangle. Instead, a neighborhood typically encompasses all of the triangles in the triangulation that share a common vertex or edge with a given triangle.

Learn more about triangulation here

brainly.com/question/30333669

#SPJ4

False. Each neighborhood in DMR encompasses the vertices and edges of a Delaunay triangle, which is a good triangle.

, each neighborhood in DMR (Delaunay Mesh Refinement) does not necessarily encompass just the vertices and edges of a bad triangle. DMR is an algorithm used to refine meshes, and it can involve both bad and good triangles to ensure a high-quality mesh output. The neighborhoods can contain multiple triangles and their respective vertices and edges, depending on the refinement criteria.

False. Each neighborhood in DMR encompasses the vertices and edges of a Delaunay triangle, which is a good triangle.

learn more about neighborhood in DMR encompasses

https://brainly.com/question/31564799

#SPJ11

Answer: We can use the halfangle formula for the tangent to answer this question. Using this formula we get that [tex]$\tan\left(\frac{11\pi}{12}\right) = \sqrt{3} - 2[/tex].

Step by Step Explanation:  The half angle formula for tangent is [tex]$\tan\left(\frac{A}{2}\right) = \frac{\sin(A)}{1+\cos(A)}[/tex]  . So

[tex]$\tan\left(\frac{11\pi}{12}\right)[/tex]

[tex]$= \frac{\sin(\frac{11\pi}{6})}{1+\cos(\frac{11\pi}{6})}[/tex]

[tex]$= \frac{\sin(2\pi - \frac{\pi}{6})}{1+\cos(2\pi - \frac{\pi}{6})}[/tex]

[tex]$ = \frac{-\sin(\frac{\pi}{6})}{1+\cos(\frac{\pi}{6})}[/tex]

[tex]$= \frac{-1/2}{1 + \sqrt{3}/2}[/tex]

[tex]$= -\frac{1}{2+\sqrt{3}}[/tex]

 [tex]$= - \frac{2-\sqrt{3}}{(2+\sqrt{3})(2-\sqrt{3})}[/tex]

[tex]= - \frac{2 -\sqrt{3}}{4-3}}[/tex]

[tex]= \sqrt{3} -2[/tex]

These are some of the common halfangle identities:

[tex]\cos(A/2) = \sqrt{\frac{1+\cos(A)}{2}[/tex]

[tex]\sin(A/2) = \sqrt{\frac{1-\cos(A)}{2}[/tex]

[tex]\tan(A/2) = \frac{\sin(A)}{1+\cos(A)} = \frac{1 - \cos(A)}{\sin(A)}[/tex]

To know more about trigonometric functions, visit:

https://brainly.com/question/14746686

#SPJ1

The expected length of a staff meeting is approximately 12.5 minutes.

what is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

To calculate the expected length of a staff meeting, we need to find the mean of the probability density function given.

The formula for finding the expected value or mean of a continuous random variable with probability density function f(x) is:

E(X) = ∫ x f(x) dx over the range of the variable

Using this formula, we can find the expected length of a staff meeting as follows:

E(X) = ∫ x f(x) dx over the range of the variable

  = ∫ 0 to 1 x [tex]5(x-0.5)^{5}[/tex] dx  (since the length of a meeting can't be negative)

  = 5 ∫ 0 to 1 x[tex](x-0.5)^{5}[/tex] dx

Now we can use integration by parts or substitution to solve the integral. For simplicity, we can use substitution, with u = x - 0.5 and du = dx:

E(X) = 5 ∫ -0.5 to 0.5[tex]5(x-0.5)(u)^{5}[/tex] du

= 5 ∫ -0.5 to 0.5 [tex](u^6 + 0.5u^5)[/tex] du

= 5 [(1/7)[tex]u^7\\[/tex] + (1/10)[tex]u^6[/tex]] evaluated at -0.5 and 0.5

= 5 [(1/7)[tex](0.5)^7[/tex] + (1/10)[tex](0.5)^6[/tex] - (1/7)[tex](-0.5)^7[/tex] - (1/10)[tex](-0.5)^7[/tex]]

≈ 0.2083 hours or 12.5 minutes

Therefore, the expected length of a staff meeting is approximately 12.5 minutes.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ4

Therefore, expression 3x5/6 simplifies to 3 5/6.

In mathematics, an expression is a combination of symbols and/or numbers that represents a quantity or a mathematical relationship between quantities. Expressions can be simple or complex, and can involve arithmetic operations, algebraic operations, functions, and variables. Expressions can be evaluated, simplified, and manipulated using mathematical rules and operations to obtain new expressions or values.

Here,

To simplify 3x5/6, we can rewrite it as (3/1) × (5/6). Multiplying the numerators and denominators, we get:

(3/1) × (5/6) = 15/6

= 2 3/6

Since 3/6 can be simplified to 1/2, we have:

2 3/6 = 2 1/2

To know more about expression,

https://brainly.com/question/1859113

#SPJ1

The reference angle of x can be found to be 13π/3.

The exact values of sin x, tan x, and sec x in simplest form:

Since our angle x = (10π) / -3 is in the third quadrant, we subtract π to get the reference angle:

reference angle = |x - π| = |(10π) / -3 - π| = |-13π/3|

The reference angle is 13π/3.

sin x = sin(reference angle) = sin(13π/3)

sin(π/3) = √3/2

So, sin x = √3/2

tan x = tan(reference angle) = tan(13π/3)

tan(π/3) = √3

So, tan x = √3

sec x = 1 / cos x = 1 / cos(reference angle) = 1 / cos(13π/3)

cos(π/3) = 1/2

So, sec x = 1 / (-1/2) = -2.

Find out more on reference angles at https://brainly.com/question/31174002

#SPJ1

The graphical representation that will be most appreciated for the data would be box plot, because the median can easily be determined from the large set of data. That is option A.

The box plot is a type of graphical representation of data that gIves more than one detail about the data set such as;

Box plots allow you to compare multiple data sets better than others dues to the above listed features that it has.

Learn more about histogram here:

brainly.com/question/28164315

#SPJ1

Answer: 3/8 >2/6

Step-by-step explanation:

Answer:

Step-by-step explanation: There are 2.54 centimeters in a inch, for every inch you need to multiply it by 2.54.  

2.54 x 12 = 30.48

Answer = 30.48

A 12inch ruler is 30cm.

If you look at a ordinary see through plastic ruler one side says 12 inches and the other, 30 centimetres by one millimeter.

Answer:

The answer for x is 27

Step-by-step explanation:

2x/3-1x/9+5=20

2x/3-x/9=20-5

6x-x/9=15

5x/9=15

multiply both sides by 9

5x/9×9=15×9

5x=15×9

divide both sides by 5

5x/5=15×9/5

x=3×9

x=27

Answer:

Step-by-step explanation:

a).The bearing of point A from B is 234°.

b). The bearing of point B from point A is 054°.

Bearing is usually measured in degrees, with 0° indicating the reference direction (usually North), and increasing clockwise to 360°. It refers to the direction or angle between a reference direction and a point or object.

The bearing of point A from B is the angle measured from the north of B to the straight line distance between A and B which is 234°. While the bearing of point B from point A is the angle measure starting from the north of A to the straight line distance between A and B which is 054°.

Therefore, the bearing of point A from B is 234° while the bearing of point B from point A is 054°.

Read more about bearing here:https://brainly.com/question/22518031

#SPJ1

The area of the rectangle is 231 square meters.

To find the area of a rectangle, we need to multiply its length by its width.

Given that the length of the rectangle is 21 meters and the width is 11 meters, we can find the area as:

Area = Length x Width

Area = 21 meters x 11 meters

Area = 231 square meters

Therefore, the area of the rectangle is 231 square meters.

Read more about atea at

https://brainly.com/question/24487155

#SPJ1

Truck B consumed 0.045 mL more diesel than Truck A.

The fuel consumption for each truck is obtained applying the proportions in the context of the problem.

A proportion is applied as we are converting a fraction to decimal, dividing the numerator by the denominator, as follows:

Hence the difference is given as follows:

0.535 - 0.49 = 0.045 mL.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

Answer:

0.00825

Step-by-step explanation:

Move the decimal point two places to the left to go from a percentage to a decimal.

Based on the given options and the information provided, the missing answer for "Reason 3" is option D, ASA.

The proof mentioned is based on the fact that the two triangles have two pairs of congruent angles and one pair of congruent sides.

This corresponds to the criteria for the ASA postulate, which states that if two triangles have two pairs of congruent angles and one pair of congruent sides, then the triangles are congruent.

Therefore, by using the ASA postulate, we can conclude that the two given triangles are congruent.

Learn more about Triangle here:

brainly.com/question/2773823

#SPJ1

Answer:  $1.80

Step-by-step explanation: 15% of 12 is 1.8