Imagine an alternate universe where the value of the Planck constant is 6.6207 x 10^-36 J*s.
In that universe, which of the following objects would require quantum mechanics to describe, that is, would show both particle and wave properties? Which objects would act like everyday objects, and be adequately described by classical mechanics?
3.A turtle with a mass of 450. g, 29. cm long, moving at 2.7 cm/s.
quantum or classical?

Answers

Answer 1

Answer:

See explanation

Explanation:

According to Louis de Broglie, particles could exhibit wavelike properties and have an associated wavelength.

Now for a turtle with a mass of 450. g, 29. cm long, moving at 2.7 cm/s, recall that we can only describe a by quantum mechanics when the body is very small and its associated wavelength is large.

This object has a large mass, hence it is discussed by classical rather than quantum mechanics


Related Questions

CHEMISTRY H E L P
In the following chemical reaction, what reactant is represented by X? AlCl₃ + X → Al(OH)₃ + NaCl

A) NaOH
B) ClOH
C) Al(OH)
D) It cannot be determined.

Answers

Answer: NAOH

Explanation:

Which chemical equation is unbalanced?
C + O2 Right arrow. CO2
Sr + O2 Right arrow. 2SrO
6H2 + 3O2 Right arrow. 6H2O
H2 + H2 + O2 Right arrow. H2O + H2O

Answers

Answer:

Sr + 02 Right arrow.2Sr0

Answer:

b

Explanation:

Isopropanol burns in oxygen to yield carbon dioxide, water, and heat. Which word equation best represents this chemical reaction?
isopropanol Right arrow. carbon dioxide + water + heat
isopropanol Right arrow. carbon dioxide + water + oxygen
isopropanol + oxygen Right arrow. carbon dioxide + water + heat
isopropanol + oxygen + heat Right arrow. carbon dioxide + water

Answers

Answer:

isopropanol + oxygen Right arrow. carbon dioxide + water + heat

Explanation:

Word equation:

isopropanol + oxygen    →   carbon dioxide + water + heat

Chemical equation:

2C₃H₇OH  + 9O₂       →     6CO₂ + 8H₂O + Heat

The given reaction is combustion of isopropanol. Isopropanol burn in the presence of oxygen and produced carbon dioxide and water. Heat is also produced in this reaction.

The given reaction also follow the law of conservation of mass. There are equal number of moles of each element on both side of reaction equation thus mass remain conserved.

isopropanol + oxygen Right arrow. carbon dioxide + water + heat

The following information should be considered:

Word equation:

isopropanol + oxygen    →   carbon dioxide + water + heat

Chemical equation:

[tex]2C_3H_7OH + 9O_2 \rightarrow 6CO_2 + 8H_2O + Heat[/tex]  

The given reaction is combustion of isopropanol. Isopropanol should be burn with the presence of oxygen and generated carbon dioxide and water. Heat is also generated in this reaction. The given reaction also follows the law of conservation of mass

Learn more; https://brainly.com/question/1691136?referrer=searchResults

Can I get Help with this question ‍♂️ please?

Answers

Answer:

Molar mass of the substance

what is the difference between the number of electrons in an atom of selenium, Se and the number of electrons in an atom of aluminum, Al?

Answers

Answer:

Well, electrons can be converted into a atomic number so if SE atomic number is 34 that means it has 34 electrons. AI has a atomic number of 13 meaning it has 13 electrons. So the difference is that SE has more electrons then AI.

What is the correct name of CUCIO2
Chemistry

Answers

Answer:

Copper(II) Chlorite = Cu(ClO2)

Explanation:

how you write the compound is very important as well

Increasing the force on an object _________ its acceleration, if the mass of the object stays the same

Answers

Increases fill in the blank

PLS HELP GIVING 100 PTS EASY SCIENCE HELP PLS

Answers

Answer:

B hope it helps

Explanation:

Why do balls bounce higher on hard floors than on carpet?

a) They don't. That is a myth.
b) The carpet friction creates thermal energy.
c) The carpet fibers attract the molecules in the ball.
d)The carpet is so nice and soft the ball doesn't want to go.

Answers

Answer:

I'm pretty sure c......

Answer is B

The friction causes the ball to lose energy on carpets, which makes the ball bounce less. On hard floors, not as much thermal energy is lost, which is why it bounces higher.

Science Safety Poster Project

Answers

Where is the poster bro

Propionic acid (CH3CH-COOH) has a K, 1.3 x 10^-5 and phosphoric acid (H3PO2) has a Ka = 7.5 x 10^-3
Choose the conjugate base for each.
A. CH3CH2COO2- for CH3CH2COOH; HPO4 2- for H3PO4
B. CH3CH2CO- for CH3CH2COOH; H2PO3 - for H3PO4
C. CH3CH2COOH2 for CH3CH2COOH; H4PO4 for H3PO4
D. CH3CH2COO- for CH3CH2COOH; H2PO4 - for H3PO4

Answers

Answer:

D. CH3CH2COO- for CH3CH2COOH; H2PO4 - for H3PO4.

Explanation:

Hello!

In this case, since the ionization of a weak acid produces a conjugate acid, molecule to which the leaving H⁺ is added to, and a conjugate base, everything that remains after the withdrawal of the H⁺, we can note down the ionization of each acid down below:

[tex]CH_3CH_2COOH\rightleftharpoons CH_3CH_2COO^-+H^+\\\\H_3PO_4\rightleftharpoons H^++H_2PO_4^-[/tex]

Thus, we notice that the answer is D. CH3CH2COO- for CH3CH2COOH; H2PO4 - for H3PO4 because the phosphoric acid is most likely to ionize to dihydrogen phosphate ions rather than phosphate, or hydrogen phosphate ions it undergoes a stepwise ionization in which the first step is the predominant one.

Best regards!

PLEASE HELP WHICH ONE IS IT AND CAN YOU EXPLAN HOW YOU GOT THE ANSWERS TY!!!

In a titration, a 20 mL sample of NaOH(aq) was neutralized by 14.9 mL of 0.13 mol/L
H2SO4(aq). The concentration of the base is
A)8.7 mol/L
B)10.048 mol/L
C)0.19 mol/L
D)0.35 mol/L
/L

Answers

Answer:

C)0.19 mol/L .

Explanation:

Hello!

In this case, since the chemical reaction between sodium hydroxide and sulfuric acid is:

[tex]H_2SO_4+2NaOH\rightarrow Na_2SO_4+2H_2O[/tex]

Whereas a 1:2 mole ratio is seen between the acid and the base, we can write:

[tex]2*M_{acid}V_{acid}=M_{base}V_{base}[/tex]

In such a way, we solve for the concentration of base and plug in to obtain:

[tex]M_{base}=\frac{2*M_{acid}V_{acid}}{V_{base}} \\\\M_{base}=\frac{2*0.13mol/L*14.9mL}{20mL} \\\\M_{base}=0.19mol/L[/tex]

Thus, the answer is C)0.19 mol/L

Best regards!

8. How many moles of carbon dioxide are there in 52.06 g of carbon dioxide?
A) 0.8452
B) 1.183
C) 6.022 x 1023
D) 8.648 x 1023
E) 3.134 x 1025

Answers

Answer:

B) 1.183

Explanation:

To convert from grams (mass) to moles, we need to divide by the atomic mass (amu)..

The amu of [tex]CO_{2}[/tex]  is 44.008

52.06/44.08 = 1.182966733

This can be rounded to 1.1830 moles of CO2

1.183 moles of carbon dioxide are there in 52.06 g of carbon dioxide.

Explanation:

Moles of substance are defined ratio of the given mass of the substance to the molar mass of the substance.

Given :

The 52.06 grams of carbon dioxide.

To find :

The moles of carbon dioxide.

Solution:

The mass of carbon dioxide = 52.06 g

The molar mass of carbon dioxide = 44.01 g/mol

The moles of carbon dioxide:

[tex]=\frac{52.06 g}{44.01 g/mol}=1.183 mol[/tex]

1.183 moles of carbon dioxide are there in 52.06 g of carbon dioxide.

Learn more about the number of moles here:

brainly.com/question/16192776?referrer=searchResults

brainly.com/question/2293228?referrer=searchResults

name all nonmetals that are noble has.
PLEASE HELP ASAP ILL GIVE YOU BRAINLIEST

Answers

Hellium argon neon xenon krypton randon oxygen fluorine chlorine bromine

The following is a procedure that was theoretically performed by a student. Read through the procedure and answer the questions below.1.A 10.0 mL graduated cylinder to measure 10.0 mL of a 1.00 M CaCl2 solution into an initially empty 50.0 mL beaker.2.A 50.0 mL graduated cylinder was then used to measure out 25.0 mL of 0.500 M K2CO3. This K2CO3solution was then added to the beaker containing the CaCl2 solution. The solution became cloudy, and the student concluded that a precipitate must have formed. Write a balanced chemical reaction below, including phases, and identify the chemical formula of the precipitate:

Answers

Answer:

CaCl2 (aq) + K2CO3(aq) ---------> CaCO3(s) + 2KCl(aq)

Explanation:

We have the reactants as calcium chloride and potassium carbonate. Recall that we are expecting that the reaction will yield a precipitate. We must keep that in mind as we seek to write its balanced chemical reaction equation.

So we now have;

CaCl2 (aq) + K2CO3(aq) ---------> CaCO3(s) + 2KCl(aq)

Recall that the rule of balancing chemical reaction equation states that the number of atoms of each element on the right side of the reaction equation must be the same as the number of atoms of the same element on the left hand side of the reaction equation.

which mineral is composed of calcium and fluorine?

Answers

Answer:

Fluorite

What is Fluorite? Fluorite is an important industrial mineral composed of calcium and fluorine (CaF2). It is used in a wide variety of chemical, metallurgical, and ceramic processes

Exactly what the first person said. Fluorite.

What is the ratio of hydrogen atoms to oxygen atoms in a water molecule?​

Answers

2:1
The ratio of hydrogen atoms to oxygen atoms used to make water molecules is always 2:1, no matter how many water molecules are being made.

Question 10 of In which way does a balanced chemical equation demonstrate the conservation of matter? A. It shows the same number of atoms of each element on both sides of the equation. B. It shows how the atoms of an element can appear on only one side of the equation. C. It shows the same number of molecules of each compound on both sides of the equation. D. It shows how matter can be both created and destroyed by a chemical reaction. SJEMALT​

Answers

Answer:

it’s probably c

Explanation:

Answer:

C

Explanation:

I searched it up

When recommending solutions to decrease human impact, which location were you able to make the greatest positive impact? Please explain your selection by using data from the simulation.
What recommendations would you give to your local community to help to decrease the local effects of human impact on the environment? List 2 recommendations and how they will positively impact your community.
What recommendations would you give to the global governments to help decrease the global effects of human impact on the environment? List 2 recommendations and how they will positively impact our planet.

Answers

When recommending solutions to decrease human impact, which location were you able to make the greatest positive impact? Please explain your selection by using data from the simulation.

New york, 893 - 853 = 40 which is the highest quotient.  

What recommendations would you give to your local community to help to decrease the local effects of human impact on the environment? List 2 recommendations and how they will positively impact your community.

Installing solar panels and replanting 2 trees for every tree that’s been cut down, this will help the atmosphere and deforestation.  

What recommendations would you give to the global governments to help decrease the global effects of human impact on the environment? List 2 recommendations and how they will positively impact our planet.

Constructing using only recycled materials decreases water pollution to 823 ppm and Creating more protected areas decreases air pollution to 368 ppm this will help the environment and oxygen.  

Answer:

........

Explanation:

Marine chemist exam in the mass percent composition of manganese sulfide compound from ocean floor he determined that 60.2% of this compound is sulfur determine the mole ratio between manganese and sulfur

Answers

Explanation:

Let the mass of the compound be 100g.

There are 60.2g of sulfur.

Moles of sulfur

= 60.2g / (32.07g/mol) = 1.877mol

There are 100g - 60.2g

= 39.8g of manganese.

Moles of manganese

= 39.8g / (54.94g/mol) = 0.724mol

Mole ratio of manganese to sulfur

= 0.724mol : 1.877mol = 1 : 2.5.

Which of the following would likely occur as a result of an oil spill in the ocean?

I. The levels of salt and other nutrients typically present in ocean water would greatly increase.
II. There would be no more upwelling of nutrients from cold ocean depths.
III. Humans would be less able to use fish and shellfish from the affected area as food.
IV. There would be global interruptions in the water cycle.
A. III only
B. IV only
C. I and III only
D. I, II, III, and IV

Answers

Answer:

D.

Explanation:

The Oil spill effects on environments and habitats can be catastrophic: they can kill plants and animals, disturb salinity/pH levels, pollute air/water and more. Read more about the types of oil pollution.

Statements that express occurrences as a result of oil spill in the ocean are:

C: I. The levels of salt and other nutrients typically present in ocean water would greatly increase.

III. Humans would be less able to use fish and shellfish from the affected area as food.

An oil spill can be regarded as a of release liquid petroleum hydrocarbon into the environment.

This release can be on land or in the body of water especially ocean, however this spillage is very dangerous to aquatic lives which indirectly affects man.

Once spillage occur, levels of salt and other nutrients will increase in the ocean and this can harm aquatic lives.

especially the marine ecosystem, due to human activity, and is a form of pollution.

Therefore option C is correct.

Learn more at:

https://brainly.com/question/19722933?referrer=searchResults

anybody?i will appreciate it

Answers

Answer:

fat provide 9 calories per gram

PLSS HELP ME

Think critically, explain why some fronts produce stronger storms than others. GIVE 2 EVIDENCES PLSSS.

I WILL GIVE YOU BRAINLIEST

Answers

There are several reasons why some front produce stronger storms than others:
- temperature difference between the air masses: the larger the difference the greater the change when they collide and the stronger the storm
- moisture
- slope of the front. Fast moving fronts tend to have a steeper slopes and a narrower band of violent weather.

How do I round 74,000 to have only one significant figure?

Answers

Answer:

7x10⁴.

Explanation:

Hello!

In this case, when rounding big number to a representation with less significant figures than it, we need to make sure we remove the spare figures and round up whether the next digit is five or more.

In such a way, for 74,000, we notice that 4 is not enough to round up the 7, that is why the number would contain a 7 only; moreover, to get rid of the thousand places, we need to introduce an exponent in 4 places, which means that the result would be:

7x10⁴.

Best regards!

Many organisms on Earth exhibit similar ____________.

Question 1 options:

time


single-celled


characteristics


nonliving

Answers

Characteristics is the correct answer!

Answer:

characteristics

Explanation:

i promise becasue i am a teacher so i hope you like it

A 50.0mL flask filled with a solution of hydrogen peroxide has a total mass of 88.5 g. The mass of the flask is 16.5 g. The density of the hydrogen peroxide solution is

Answers

Answer:

1.44 g/mL

Explanation:

total mass is mass of the flask plus mass of the solution

TM = Flask + H2O2

88.5 = 16.5 + x

x = 72.0 gram

density = mass/volume

H2O2 density = 72/50

= 1.44 g/mL

A gas in a sealed container has a pressure of 100 kPa at a temperature of 27 C. If the pressure in the container is increased to 20 kPa, what is the new temperature?

Answers

Answer: 32.4 C

Explanation: Gay-Lussac's Law or Third Gas Law states that for a constant volume, the pressure is directly proportional to absolute temperature: P alpha T; also stated as P/T = K, where K is a constant, and similarly, P1/T1 = P2/T2 .

Here P1= 100 kPa, P2=120 kPa (If pressure increases by 20 kPA), T1=27 C [Given]

Hence, T2= (T1*P2)/P1 = (27*120)/100=32.4 C [C is degree in Celcius]

The new temperature of the gas in the container when the pressure increased by 20 KPa is 87 °C

Data obtained from the question Initial pressure (P₁) = 100 KPa Initial temperature (T₁) = 27 °C = 27 + 273 = 300 KNew pressure (P₂) = 120 KPa New temperature (T₂) =?

How to determine the new temperature

The new temperature of the gas can be obtained as follow:

P₁ / T₁ = P₂ / T₂

100 / 300 = 120 / T₂

Cross multiply

100 × T₂ = 300 × 120

Divide both side by 100

T₂ = (300 × 120) / 100

T₂ = 360 K

Subtract 273 to obtain answer in °C

T₂ = 360 – 273 K

T₂ = 87 °C

Learn more about gas laws:

https://brainly.com/question/6844441

#SPJ2

What can rocks tell paleoclimatologists about Earth’s atmosphere at the time that the rock was forming?

Answers

Answer: Rocks can tell paleoclimatologists the different climates that have existed during different geological ages.

Hope this helps!

9. What metric unit would be most
appropriate to use when measuring
the length of a paperclip?
a. Millimeter
b. Decimeter
c. Meter
d. Kilometer

Answers

Answer: a. Millimeter

Explanation:

A paperclip is a small device or instrument that can be used to hold the papers or stack of papers together. The length of the paperclip can be measured using millimeter. It is equal to the thousands of meters. The millimeter is a dimension which is used to measure the very small length objects which have visible scale distances and length.

Decimeter can be used to measure the length of the object smaller than paperclips. Meter and kilometers are used for objects and distances larger than paperclip.

A coffee cup calorimeter contains 100.0 mL of 1.50 M Ba(NO3)2 at 25.0o C. A student pours 100.0 mL of 1.50 M Na2SO4 at 25.0o C into the calorimeter. A precipitate forms and the temperature rises to 29.7o C. Assume that no heat was lost to the surroundings, the volumes were additive, the specific heat capacity of the solution was 4.184 J/gK, and the density of the solution was 1.00 g/mL.
A. This reaction could be represented as a complete ionic or a net ionic equation. Write the balanced chemical equation that should be used in association with the Delta Hrxn value for this reaction.
B. Find the amount of heat that was lost or gained by the solution in the calorimeter.
C. Find the heat of reaction, Delta Hrxn.
D. Is the reaction endothermic or exothermic?

Answers

Answer:

Ba(NO₃)₂  +  Na₂SO₄   →  BaSO₄ + 2NaNO₃

q = 3.93 kJ

ΔH_{rxn} =  26.2 kJ/mole

Exothermic

Explanation:

Given that:

The Volume of Ba (NO₃)₂ = 100.0 mL

The molarity of Ba (NO₃)₂ = 1.50 M

The volume of Na₂SO₄ = 100.0 mL

The molarity of Na₂SO₄ = 1.50 M

From the above, the total volume of solution = 200.0 mL

Density of solution = 1 g/mL

The balanced equation can be written as:

Ba(NO₃)₂  +  Na₂SO₄   →  BaSO₄ + 2NaNO₃

We know that:

Density = mass/volume

Thus;

the mass of the solution = density × volume

= 200 × 1

= 200 g

Temperature change ΔT = T₂ - T₁

ΔT = (29.7 - 25)° C

ΔT = 4.7° C

Heat capacity c = 4.184 J/gK

The amount of heat lost or gained q = m× c×ΔT

q = 200 × 4.184 × 4.7

q = 3932.96 J

q = 3.93 kJ

From the above information, we can determine the number of moles of Ba(NO₃)₂ and  Na₂SO₄

For Ba(NO₃)₂

number of moles = 0.10 × 1.50

= 0.15

For Na₂SO₄

number of moles = 0.10 × 1.50

= 0.15

ΔH_{rxn} = q/number of moles

ΔH_{rxn} = 3.93/0.15

ΔH_{rxn} =  26.2 kJ/mole

From the reaction, we will notice that the temperature increased. This significantly implies that heat is evolved from the reaction. As such, the reaction is exothermic.

Other Questions
What is the difference between digital instruments and decimal scaled instruments to measure Could you please explain how you got your answer Need help with this question pls help. Hi today im becoming completely honest with everyone ive met online Hi I'm Yuri I suffer with D.I.D if you don't understand what that is look it upHi I'm eenwoo I live inside of Yuri (who is the host) but she likes to call me her older brother I'm 20 and Yuri is 17 i hope my old friends will understand that I wasn't cat fishing and I'm sorry for the misunderstanding we just didn't feel comfortable telling you guys....I hope you forgive us :) i'm really getting tired of the questions like these lol 4/3=-6e-5/3solve for "E" plz Please help please help ASAP please answer if you can i just can't understand:( Write one sentence that contain past tense Consider a second cosine waveform y(t) with the peak value of 10A and frequency of 60Hz. Calculate the power throughtput wherein x(t) and y(t) can be assumed to be the voltage waveform and the current waveform respectively across the two terminals. Have you ever get pis-s-ed of because you care so much about things and other people's life and stuff? Where the sidewalk ends , please give me all the answers. You will get 10 points According to the scatterplot below, about how many commercials could one expect to see in 30 minutes of television programming? Contagious diseases are under control and no longer pose a serious threat to public health today.TrueFalse Please help and thank you I need help I'm in 5th grade and this all my points You were in the car with a family member. You started with 7/10 of a tank of gas, and when you got home you had . How much gas did you use? To understand the concept of moment of a force and how to calculate it using a scalar formulation.The magnitude of the moment of a force with a magnitude F around a point O is defined as follows:MO=Fdwhere d is the force's moment arm. The moment arm is the perpendicular distance from the axis at point O to the force's line of action.A stool at a restaurant is anchored to the floor. When a customer is in the process of sitting down, a horizontal force with magnitude F1 is exerted at the top of the stool support. When the customer is seated, a vertical force with magnitude F2 is exerted on the stool support. If the maximum moment magnitude that the stool support can sustain about point A is MA = 160 Nm , what is the maximum height d1 that the stool can have if the magnitudes of the two forces are F1 = 300 N and F2 = 720 N . Assume that moments acting counterclockwise about point A are positive whereas moments acting clockwise about A are negative. Explain the difference between an invasive species and a nonnative species. can u pls help me with this question