I'm walking 1.6m/s to 7-11 and it started to rain so I sped up to 2.7m/s in 1.2
seconds. What is my acceleration?
a=(vf-viyt
-0.92m/s2
O 01.1m/s2
0.92m/s2
1.1m/s2
1 points
Save A

Answer:

Coefficient of kinetic friction = 0.38 (Approx.)

Explanation:

Given:

Applied force = 45 N

Mass of wooden crate = 12 kg

Find:

Coefficient of kinetic friction

Computation:

Coefficient of kinetic friction = Applied force / (Mass)(Acceleration due to gravity)

Coefficient of kinetic friction = 45 / (12)(9.8)

Coefficient of kinetic friction = 45 / 117.6

Coefficient of kinetic friction = 0.3826

Coefficient of kinetic friction = 0.38 (Approx.)

Answer:

The system will tend to person A

Explanation:

A force is defined as either a pull or a push, in this scenario person A weighs lass that person B, so the resultant effect of the 10N interactive force will tend towards person A.

This is solely because person A is less than person B in weigh

Answer:

Initial y-component of speed

Vy = 28 * sin 30 = 14 m/sec vertically

1/2 m Vy^2 = 2 m g h    conservation of energy of y-component

h = Vy^2 / (2 * g) = 14^2 / (2 * 9.8) = 10 m

The answer for this question is negative externality

The direction of acceleration due to gravity is always towards earth, going downwards.

mark me brainliesttt :))

Answer:

[tex] \large{ \tt{☄ \: EXPLANATION}} : [/tex]

[tex] \large{ \tt{♨ \:LET'S \: START}} : [/tex]

[tex] \large{ \boxed{ \tt{❁ \: ACCELERATION \: (a) = \frac{FINAL \: VELOCITY(v) - INITIAL \: VELOCITY(u)}{TIME \: TAKEN \: ( \: t \: )}}}} [/tex]

- Plug the values & then simplify !

[tex] \large{ \bf{↬a = \frac{60 - 0}{300} = \frac{60}{300} = \boxed{ \bold{ \bf{0.2 \: m {s}^{ - 2} }}} }}[/tex]

[tex] \large{ \tt{۵ \: AGAIN, \: USING\: SECOND \: EQUATION \: OF \: MOTION}} : [/tex]

[tex] \boxed{ \large{ \bf{✾ \: s = \frac{u + v}{2} \times t}}}[/tex]

- Plug the values & then simplify !

[tex] \large{ \bf{↦s = \frac{0 + 60}{2} \times 300 = \boxed{ \bold{ \bf{9000 \: m}}}}}[/tex]

❃ The days that break you are the days that make you ! ♪

♡ Hope I helped! ツ

☃ Have a wonderful day / evening ! ☼

# StayInAndExplore ! ☂

▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁

Answer:

What she said is right I know it is

Answer:

3.125×10²¹ N/C

Explanation:

Electric Field: This can be defined as the force experienced per unit charge. The S.I unit of electric Field is N/C

Applying,

E = F/q.................. Equation 1

Where E = Electric Field, F = Force experienced, q = Charge of an electron.

From the question,

Given: F = 500 N, q = 1.6×10⁻¹⁹ C

Substitute these values into equation 1

E = 500/(1.6×10⁻¹⁹)

E = 312.5×10¹⁹

E = 3.125×10²¹ N/C

Answer:

Train Bike Truck

Explanation:

Answer:

[tex] \large{ \tt{☄ EXPLANATION}} : [/tex]

[tex] \large{ \tt{♡ \: LET'S \: GET \: STARTED}} : [/tex]

[tex] \large{ \boxed{ \tt{❃ \: WORK ( \: W \: ) = FORCE\: ( \: F) \times DISPLACEMENT \: ( \: D \: )}}}[/tex]

- Plug the values and then simplify !

[tex] \large{ \bf{↦ \: 150 = F \times 10}}[/tex]

[tex] \large{ \bf{↦F\times 10 = 150}}[/tex]

[tex] \large{ \bf{↦ \: F = \frac{150}{10}}} [/tex]

[tex] \large {\bf{↦F = \boxed{ \bf{15} \: N}}}[/tex]

[tex] \boxed{ \boxed{ \large{ \tt{✤ \: OUR \: FINAL \: ANSWER : \boxed{ \bf{15 \: n}}}}}}[/tex]

ツ Hope I helped ! ۵

☪ Have a wonderful day / evening ! ☼

# StayInAndExplore ! ☂

▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁

Answer:

Power = ML²T⁻³

Pressure = ML⁻¹T⁻²

Explanation:

Applying,

Power(P) = Work(W)/Time(t)

P = W/t..................... Equation 1

But

W = Fd............. Equation 2

Where F = force, d = distance

Also,

F = ma.............. Equation 3

Where m = mass, a = acceleration.

Also,

a = v/t................  Equation 4

Where v = velocity

Also,

v = d/t............... Equation 5

Where d = distance

Substitute equation 5 into equation 4

a = d/t²................. Equation 6

Substitute equation 6 into equation 3

F = m(d/t²)........... Equation 7

Susbtitute equation 7 into equation 2

W = m(d/t²)×d

W = md²/t²........... Equation 8

Substitute equation 8 into equation 1

P = (md²/t²)/t

P = md²/t³............ Equation 9

In dimension,

mass(m) = M, distance(d) = L, time(t) = T

Substitute into equation 9

P = ML²/T³

P = ML²T⁻³

And

Pressure(R) = Force(F)/Area(A)

R = F/A................ Equation 10

F = md/t²,

A = d²

Susbtitute into equation 10

R = (md/t²)/d²

R = m/t²d

Therefore,

R = ML⁻¹T⁻²

According to law of conservation of energy,

= ½mv² = mgh

= mv² = 2mgh

= v² = 2mgh/m

= v = √2gh

So, now just put the values of g & h, abd you are done;

= v = √2×9.8×1.6

= v = √31.36

= v = 5.6 m/s

Answer:

10 is the correct answer

Answer:

Total Distance: 420 meters

Diameter: 42 cm

Notice the units meters vs cm

420÷ 42 = 10 total revolutions

Answer:

67.5

Explanation:

The plane accelerates at 2.7m/s,^2

Time is 25 seconds

The velocity can be calculated as follows

= 25×2.7

= 67.5

Hence the speed f the plane is 67.5

Answer:

  t = 0.714 s and  x = 5.0 m

Explanation:

This is a projectile throwing exercise, in this case when the skater leaves the bridge he goes with horizontal speed

         vₓ = 7.0 m / s

Let's find the time it takes to get to the river

         y = y₀ + v_{oy} t - ½ g t²

the initial vertical speed is zero and when it reaches the river its height is zero

        0 = y₀ + 0 - ½ g t²

        t = [tex]\sqrt{\frac{2y_o}{g} }[/tex]

        t = ra 2 2.5 / 9.8

        t = 0.714 s

the distance traveled is

       x = vₓ t

       x = 7.0 0.714

       x = 5.0 m

Answer: [tex]0.05\ mm[/tex]

Explanation:

Given

Cross-sectional area of wire [tex]A_1=4\ mm^2[/tex]

Extension of wire [tex]\delta l=0.1\ mm[/tex]

Extension in a wire is given by

[tex]\Rightarrow \delta l=\dfrac{FL}{AE}[/tex]

where, [tex]E=\text{Youngs modulus}[/tex]

[tex]\Rightarrow \delta_1=\dfrac{FL}{A_1E}\quad \ldots(i)[/tex]

for same force, length and material

[tex]\Rightarrow \delta_2=\dfrac{FL}{A_2E}\quad \ldots(ii)[/tex]

Divide (i) and (ii)

[tex]\Rightarrow \dfrac{0.1}{\delta_2}=\dfrac{A_2}{A_1}\\\\\Rightarrow \delta_2=0.1\times \dfrac{4}{8}\\\\\Rightarrow \delta_2=0.05\ mm[/tex]

Explanation:

given Time Period = 5 Sec

Amplitude = 1m, Wave length = 15 m

using time period = 1/ frequency , Frequency = 1/5 cycles per sec = 0.2 sec = 12 per min

wave speed= Frequency * Wave length

speed = 0.2*15 = 3m/s

Answer:

T = 0.01 s

Explanation:

Given that,

The frequency of the beats of a hummingbird, f = 100 Hz

We need to find the period of the hummingbirds flaps. Let the time is t. We know that the relation between frequency and time period is given by :

T = 1/f

Put all the values,

T = 1/100 = 0.01 s

So, the time period of the humming bird is 0.01 s.

Answer:

All of above

Explanation:

[tex]\huge{ \mathrm{  \underline{ Answer }\:  \:  ✓ }}[/tex]

Total force acting on right side = 800 N

Total force acting on left side :

Now, equivalent force acting on the plane is :

And the direction of equivalent force will be the direction of greater force, that is right direction.

Hence, Correct option is :

_____________________________

[tex]\mathrm{ \:TeeNForeveR\:}[/tex]

Answer:

[tex]D_T=18.567m[/tex]

Explanation:

From the question we are told that:

Acceleration [tex]a=8.0 m/s^2[/tex]

Displacement [tex]d=1.05 m[/tex]

Initial time [tex]t_1=6.0s[/tex]

Final Time [tex]t_2=2.5s[/tex]

Generally the equation for Velocity of 1.05 travel is mathematically given by

Using Newton's Law of Motion

 [tex]V^2=2as[/tex]

 [tex]V=\sqrt{2*6*1.05}[/tex]

 [tex]V=4.1m/s[/tex]

Generally the equation for Distance traveled before stop is mathematically given by

 [tex]d_2=v*t_1[/tex]

 [tex]d_2=3.098*4[/tex]

 [tex]d_2=12.392[/tex]

Generally the equation for Distance to stop is mathematically given by

Since For this Final section

Final velocity [tex]v_3=0 m/s[/tex]

Initial velocity [tex]u_3=4.1 m/s[/tex]

Therefore

Using Newton's Law of Motion

 [tex]-a_3=(4.1)/(2.5)[/tex]

 [tex]-a_3=1.64m/s^2[/tex]

Giving

 [tex]v_3^2=u^2-2ad_3[/tex]

Therefore

 [tex]d_3=\frac{u_3^2}{2ad_3}[/tex]

 [tex]d_3=\frac{4.1^2}{2*1.64}[/tex]

 [tex]d_3=5.125m[/tex]

Generally the Total Distance Traveled is mathematically given by

 [tex]D_T=d_1+d_2+d_3[/tex]

 [tex]D_T=5.125m+12.392+1.05 m[/tex]

 [tex]D_T=18.567m[/tex]

Answer:

The path difference must be equal to an integral (1 * lambda, 2 * lambda, -------n * lambda) number of wavelengths for constructive interference to occur.

Answer:

A screw is a mechanism that converts rotational motion to linear motion, and a torque (rotational force) to a linear force.[1] It is one of the six classical simple machines. The most common form consists of a cylindrical shaft with helical grooves or ridges called threads around the outside.[2][3] The screw passes through a hole in another object or medium, with threads on the inside of the hole that mesh with the screw's threads. When the shaft of the screw is rotated relative to the stationary threads, the screw moves along its axis relative to the medium surrounding it; for example rotating a wood screw forces it into wood. In screw mechanisms, either the screw shaft can rotate through a threaded hole in a stationary object, or a threaded collar such as a nut can rotate around a stationary screw shaft.[4][5] Geometrically, a screw can be viewed as a narrow inclined plane wrapped around a cylinder.

Explanation:

Answer:

Change is for better and is necessary too. Everyone knows it but only the ones who apply it are the ones whom we call as intelligent. When a person changes in an order to make his life better, he chooses the right thing because staying put at a place in life doesn't take anyone anywhere.

Taking the example of a few infamous personalities, whom we consider as intelligent, we see a common thing that each one of them had a certain vision in life and in order to achieve it, they were ready to accept any kind of change and still are. So, this makes it clear that change is what leads us to our goal and in order to achieve it, we need to change with time.

Answer:

0.011

Explanation:

Answer:

84.05

Explanation:

F=f+F

F=49.05+35

=84.05

Answer:

 v_f = 20 m / s

Explanation:

For this exercise let's use the relationship between momentum and moment

        I = Δp

        F t = m v_f - m v₀

as the body starts from rest v₀ = 0

        F t = m v_f

        v_f = [tex]\frac{F t}{m}[/tex]

let's calculate

        v_f = 4 2 / 0.4

         v_f = 20 m / s

Answer:

When electrons flow through wires from a terminal to a terminal circuit is created.

Answer:

The impulse applied by the stick to the hockey park is approximately 7 kilogram-meters per second.  

Explanation:

The Impulse Theorem states that the impulse experimented by the hockey park is equal to the vectorial change in its linear momentum, that is:

[tex]I = m\cdot (\vec{v}_{2} - \vec{v_{1}})[/tex] (1)

Where:

[tex]I[/tex] - Impulse, in kilogram-meters per second.

[tex]m[/tex] - Mass, in kilograms.

[tex]\vec{v_{1}}[/tex] - Initial velocity of the hockey park, in meters per second.

[tex]\vec{v_{2}}[/tex] - Final velocity of the hockey park, in meters per second.

If we know that [tex]m = 0.2\,kg[/tex], [tex]\vec{v}_{1} = -10\,\hat{i}\,\left[\frac{m}{s}\right][/tex] and [tex]\vec {v_{2}} = 25\,\hat{i}\,\left[\frac{m}{s} \right][/tex], then the impulse applied by the stick to the park is approximately:

[tex]I = (0.2\,kg)\cdot \left(35\,\hat{i}\right)\,\left[\frac{m}{s} \right][/tex]

[tex]I = 7\,\hat{i}\,\left[\frac{kg\cdot m}{s} \right][/tex]

The impulse applied by the stick to the hockey park is approximately 7 kilogram-meters per second.  

Answer:

the types of force shown in the picture is

balanced force.