I'll give you brainliest, if your answer is right :) Element A is in group 1A with a molar mass of 10 g/mol Element B is in group 7A with a molar mass of 30g/mol
a, A (solid) and B (gas) undergoes a combination reaction. Write the balanced chemical equation.
b, How many grams of B2 are needed to form a 2.5 M solution of AB with a volume of 250 mL?

Answers

Answer 1

Mass of B₂ = 18.75 g

Further explanation

Given

Element A and element B

Required

The reaction

mass of B₂

Solution

The balanced equation :

2A(s) + B₂(g) ⇒2AB(s)

mol AB :

= Molarity x Volume

= 2.5 M x 0.25 L

= 0.625

From the equation, mol ratio of B₂ : AB = 1 : 2, so mol B₂ :

= 1/2 x mol AB

= 1/2 x 0.625

= 0.3125

Mass B₂ (Molar mass = 2x30 g/mol=60 g/mol)

= mol x molar mass

= 0.3125 x 60 g/mol

= 18.75 g


Related Questions

If the flour mixture is then taken and put into the oven for about 20 minutes, it turns into something very tasty. What kind of change has happened now?

Answers

Answer:

physical change

Explanation:

i got the same question sorry for the late response but that's the answer good luck

ANSWER QUICK !!!
How many grams of hydrogen gas will be produced if you start with 15.0 grams of zinc and an excess amount of HCI?

balanced equation:
Zn + 2HCI = ZnCl2 + H2

Answers

Answer:

uhh

ExplanatioUHHHHHHHHHHHHHHHHHHH

UHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

WHAT

IS

THIS

AAAAAAAA

Calculate the number of oxygen atoms in a 50.0g sample of scheelite CaWO4

Answers

Answer:

0.696 atoms of oxygen

Explanation:

We'll begin by calculating the number of mole in 50 g of scheelite CaWO₄. This can be obtained as follow:

Mass of CaWO₄ = 50 g

Molar mass of CaWO₄ = 40 + 184 + (4×16)

= 40 + 184 + 64

= 288 g/mol

Mole of CaWO₄ =?

Mole = mass / Molar mass

Mole of CaWO₄ = 50 / 288

Mole of CaWO₄ = 0.174 mole

Finally, we shall determine the number of oxygen atom in 50 g (i.e 0.174 mole) of CaWO₄. This can be obtained as follow:

1 mole of CaWO₄ contains 4 atoms of oxygen.

Therefore, 0.174 mole of CaWO₄ will contain = 0.696 atoms of oxygen.

Thus, 50 g (i.e 0.174 mole) of CaWO₄ contains 0.696 atoms of oxygen.

The combustion of gasoline produces carbon dioxide and water. assume gasoline to be pure octane (c8h18) and calculate how many kilograms of carbon dioxide are added to the atmosphere per 3.8 kg of octane burned. ( hint: begin by writing a balanced equation for the combustion reaction.) express your answer using two significant figures.

Answers

Answer:

11.73 Kg of CO₂

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2C₈H₁₈ + 25O₂ —> 16CO₂ + 18H₂O

Next, we shall determine the mass of C₈H₁₈ that reacted and the mass of CO₂ produced from the balanced equation. This can be obtained as follow:

Molar mass of C₈H₁₈ = (12×8) + (18×1)

= 96 + 18

= 114 g/mol

Mass of C₈H₁₈ from the balanced equation = 2 × 114 = 228 g

Convert 228 g to kg.

1000 g = 1 Kg

Therefore,

228 g = 228 g × 1 Kg / 1000 g

228 g = 0.228 Kg

Molar mass of CO₂ = 12 + (16×2)

= 12 + 32

= 44 g/mol

Mass of CO₂ from the balanced equation = 16 × 44 = 704 g

Convert 704 g to Kg

1000 g = 1 Kg

Therefore,

704 g = 704 g × 1 Kg / 1000 g

704 g = 0.704 Kg

SUMMARY:

From the balanced equation above,

0.228 Kg of C₈H₁₈ reacted to produce 0.704 Kg of CO₂.

Finally, we shall determine the mass of carbon dioxide, CO₂, that will be produced by the reaction of 3.8 kg of octane, C₈H₁₈. This can be obtained as follow:

From the balanced equation above,

0.228 Kg of C₈H₁₈ reacted to produce 0.704 Kg of CO₂.

Therefore, 3.8 kg of C₈H₁₈ will react to produce = (3.8 × 0.704) / 0.228 = 11.73 Kg of CO₂

Thus, 11.73 Kg of CO₂ is added to the atmosphere per 3.8 kg of C₈H₁₈.

Calculate how much heat is absorbed by a sample that weighs 12 kilograms, has a specific heat of 0.231 kg/CJ, and is heated from 45 K to 80 K.
PLEASE ANSWER 20 POINTS

Answers

Answer:

97 J

Explanation:

Step 1: Given data

Mass of the sample (m): 12 kgSpecific heat capacity (c): 0.231 J/kg.°C (this can also be expressed as 0.231 J/kg.K)Initial temperature: 45 KFinal temperature: 80 K

Step 2: Calculate the temperature change

ΔT = 80 K - 45 K = 35 K

Step 3: Calculate the heat required (Q)

We will use the following expression.

Q = c × m × ΔT

Q = 0.231 J/kg.K × 12 kg × 35 K = 97 J

I need help ASAP please giving brainliest!!

Answers

Answer:

Silver Lake Picnic Area, Or C

Explanation:

answer is top option, aka A


______ is required for making a scientific inquiry

Answers

Understanding the natural world

Which of the following BEST describes how these elements would be classified?

A.
Element Q is a nonmetal and element R is a nonmetal.

B.
Element Q is a metal and element R is a metalloid.

C.
Element Q is a nonmetal and element R is a noble gas.

D.
Element Q is a metal and element R is a noble gas.

Answers

The answer is C!! Good luck!

Draw the electron configuration for a neutral atom of nitrogen.

Answers

Answer:

1s22s22p3.

Explanation:

Electronic configuration of a neutral atom is 1s22s22p3.  

Please see the image attached

 

Neutral atom of nitrogen will have equal number of proton and electron i.e equal to 7. 7 electron of the nitrogen are placed into the s and p orbitals in the ground state.  

In his experiment, Balmer introduced hydrogen gas in a discharged tube in order to excite electrons on higher energy levels. Then, as the electrons dropped down to lower energy levels, photons were emitted by the atoms. What is the energy of a photon emitted by a electron dropping from level n

Answers

Answer:

2.56 eV

Explanation:

Using the formula;

ΔE= -RH(1/n^2final - 1/n^2initial)

RH = -2.18 * 10-18 J

nfinal = 2

ninitial =1

Substituting values;

ΔE= -2.18 * 10-18 J(1/4^2 - 1/2^2)

ΔE= -2.18 * 10-18 J(0.0625 - 0.25)

ΔE= 4.09 * 10^-19 J

To convert to eV

4.09 * 10^-19 J/1.6 * 10^-19

=2.56 eV

is microorganisms bigger or particles bigger

Answers

Answer:

particles bigger

Explanation:

Even when compared with animal cells, microorganisms become smaller. They are about 1/10 the size of a typical human cell. Therefore, compared with human-sized animal cells, the size of bacteria (such as bacterial cells) will be the size of a cat or puppy. The size of the virus is about 1/10 of that of other microorganisms such as bacteria.

Hope it helps. If not, I'm so sorry.

Answer:

particles are bigger than microorganism

2.Your culture media recipe says you need to add 2.625g of Sodium Bicarbonate per liter of media. You realize you only have a 7.5% solution of Sodium Bicarbonate you can use. What volume of that solution can you add, while making your media, to have the necessary mass of NaHCO3

Answers

Answer:

35mL of the 7.5% solution are required to meake the media

Explanation:

To prepare the culture media there are required 2.625g of sodium bicarbonate. We have a 7.5% solution of sodium bicarbonate (That is, 7.5g of sodium bicarbonate in 100mL of solution). Thus, to obtain 2.625g we need:

2.625g Sodium bicarbonate * (100mL / 7.5g) =

35mL of the 7.5% solution are required to meake the media

A certain molecular compound has a solubility in acetonitrile of at . Calculate the greatest mass of that could be dissolved in of acetonitrile at this temperature. You may assume the volume of the solution doesn't change as the is dissolved. Be sure your answer has the correct unit symbol and number of significant digits.

Answers

Answer:

Amount = 2250 g

Explanation:

Note: This question is incomplete and lacks each and every data to solve. However, I have found the similar question on the internet and will be solving this question for you. Cheers!

Data Missing:

Organic Compound O

Solubility = 0.225 g/ml

Temperature = 10°C

Calculate the greatest mass of O that can be dissolved in 10.0 L acetonitrile at 10°C temperature.

Solution:

As we know the volume of the acetonitrile = 10.0 L

but first, we need to convert this into mL

We know that,

1 L contains 1000 mL

So,

10 L will contain = 10 x 1000 mL

10 L = 10000 mL

We, can write, 10000 mL as:

1 x [tex]10^{4}[/tex] mL

Now, the formula to calculate the greatest amount of O that can be dissolved in 1 x [tex]10^{4}[/tex] mL acetonitrile at 10°C temperature is:

Amount  = Solubility x volume

Here,

Solubility = 0.225 g/ml

and

Volume = 1 x [tex]10^{4}[/tex] mL

Plugging in the values, we get:

Amount  = 0.225 g/ml x 1 x [tex]10^{4}[/tex] mL

Amount  = 0.225 x [tex]10^{4}[/tex] g

Amount = 2250 g

What determines the change of an ion formed by an atom

Answers

Answer:

Ions are formed when the number of protons in an atom does not equal the number of electrons. If more protons are present, the ion is positive and is known as a cation; if more electrons are present, the ion is negative and referred to as an anion. Ions are highly reactive species.

Explanation:

Answer:

An atom becomes charged when the number of protons does not equal the number of electrons. For example, if an element has six protons but only five electrons, the net charge of the element is +1. Conversely, if an element has six protons but seven electrons, then the net charge of the element is -1.

Explanation:

In addition to liquid precipitation, which are present when freezing rain occurs?

ice pellets
snowflakes
cold surfaces
warm temperatures

Answers

Answer:

I believe the correct answer is cold surfaces.

Explanation:

Answer:

C

Explanation:

If snails and crayfish die, what happens to the other species?

Answers

Crayfish are very intolerant of pollution and other human-generated fouling of their environment. ... This abundance may be due more to the acid-generated absence of fish which prey on crayfish than to a direct, positive influence of the acid on the crayfish itself.

Answer:

Other species will slowly die, because the species that eat snails and crayfish will not have anything to eat, then the thing that eats them will not have anything. This process will go on and on. So long story short populations will decrease, then off.

When 70.4 g of benzamide (C7H7NO) are dissolved in 850. g of a certain mystery liquid X, the freezing point of the solution is 2.7 C lower than the freezing point of pure X. On the other hand, when 70.4 g of ammonium chloride (NH CI) are dissolved in the same mass of X, the freezing point of the solution is 9.9 °C lower than the freezing point of pure X.

Required:
Calculate the van't Hoff factor for ammonium chloride in X.

Answers

Answer:

1.62

Explanation:

From the given information:

number of moles of benzamide  [tex]=\dfrac{70.4 \ g}{121.14 \ g/mol}[/tex]

= 0.58 mole

The molality = [tex]\dfrac{mass \ of \ solute (i.e. \ benzamide )}{mass \ of \ solvent }[/tex]

[tex]= \dfrac{0.58 }{0.85 }[/tex]

= 0.6837

Using the formula:

[tex]\mathbf {dT = l \times k_f \times m}[/tex]

where;

dT = freezing point = 27

l = Van't Hoff factor = 1

kf = freezing constant of the solvent

2.7 °C = 1 × kf ×  0.6837 m

kf = 2.7 °C/ 0.6837m

kf = 3.949 °C/m

number of moles of NH4Cl = [tex]\dfrac{70.4 \ g}{53.491 \ g /mol}[/tex]

= 1.316 mol

The molality = [tex]\dfrac{1.316 \ mol}{0.85 \ kg}[/tex]

= 1.5484

Thus;

the above kf value is used in determining the  Van't Hoff factor for  NH4Cl

i.e.

9.9 = l × 3.949 × 1.5484 m

[tex]l = \dfrac{9.9}{3.949 \times 1.5484 \ m}[/tex]

l = 1.62

Draw a Lewis structure for SO2 in which all atoms have a formal charge of zero. Explicitly showing the zero charges is optional. Do not consider ringed structures.

Answers

Answer:

See explanation and image attached

Explanation:

"A formal charge (FC) is the charge assigned to an atom in a molecule, assuming that electrons in all chemical bonds are shared equally between atoms, regardless of relative electronegativity" (chemlibretext).

We can obtain the formal charge from the formula;

Formal Charge = [number of valence electrons on atom] – [non-bonded electrons + 1/2number of bonds].

A structure in which SO2 has a zero formal charge is attached to this answer.

Image credit: Chemtopper

[10 pts]Iron and vanadium both have the BCC crystal structure and V forms a substitutional solid solution in Fe for concentrations up to approximately 20 wt.% V at room temperature. Determine the concentration in weight percent of V that must be added to iron to yield a unit cell edge length of 0.289 nm.

Answers

Answer:

The answer is below

Explanation:

The unit cell edge length (a) = 0.298 nm = 0.289 * 10⁻⁷ cm

The unit volume (V) = a³ = (0.289 * 10⁻⁷ cm)³ = 24 * 10⁻²⁴ cm³

There are 2 atoms per cell, hence N = 2. Also, [tex]n_a=avogadro\ constant=6.02*10^{23}\ mol^{-1}[/tex]

[tex]atomic\ weight\ of\ iron(A_f)=55.85,atomic\ weight\ of\ vanadium(A_V)=50.94,[/tex]

[tex]density\ of\ iron(\rho_f)=7.87,density\ of\ vanadium(\rho_v)=6.1.\\\\V=\frac{nA_{av}}{n_a\rho_{av}} \\\\A_{av}=\frac{100}{C_v/A_v+C_f/A_f} \\\\\rho_{av}=\frac{100}{C_v/\rho_v+C_f/\rho_f} \\\\C_v=concentration\ of\ vanadium,C_f=concentration\ of\ iron.\\\\V=\frac{nA_{av}}{n_a\rho_{av}}=\frac{n*\frac{100}{C_v/A_v+C_f/A_f}}{n_a*\frac{100}{C_v/\rho_v+C_f/\rho_f}}\\\\[/tex]

[tex]24*10^{-24}=\frac{2*\frac{100}{C_v/50.94+C_f/55.85}}{6.02*10^{23}*\frac{100}{C_v/6.1+C_f/7.87}}\\\\7.2=\frac{C_v/6.1+C_f/7.87}{C_v/50.94+C_f/55.85}\ \ \ (1) \\\\Also:\\\\C_v+C_f=100\%\ \ \ (2)\\\\\\solving\ equation\ 1\ and\ 2\ simultaneously\ gives:\\\\C_v=10\% \ and\ C_f=90\%\\\\[/tex]

The heat of vaporization of water at the normal boiling point, 373.2 K, is 40.66 kJ/mol. The molar heat capacity of liquid water is 75.37 J K-1 mol-1 and that of gaseous water is 36.4 J K-1 mol-1. Assume that these values are independent of temperature. What is the heat of vaporization of water at 300.2 K?

Answers

Answer:

[tex]\Delta _{vap}H(300.2K)=43,658\frac{J}{mol}=43.66\frac{kJ}{mol}[/tex]

Explanation:

Hello!

In this case, according to the Kirchhoff's law for the enthalpy change, it is possible to compute the heat of vaporization at 300.2 K by considering the following thermodynamic route:

[tex]\Delta _{vap}H(300.2K)=Cp_{liq}(T_b-T\°)+\Delta _{vap}H\°+Cp_{vap}(T-T_B)[/tex]

Whereas the first term stands for the effect of taking the liquid from 298.15 K to 373.15 K, the second term stands for the standard enthalpy of vaporization and the last term that of the vapor from the boiling point to 300.2 K; thus we plug in to obtain:

[tex]\Delta _{vap}H(300.2K)=75.37\frac{J}{mol*K} (373.2K-298.15K)+40,660\frac{J}{mol} +36.4\frac{J}{mol*K}(300.2K-373.2K)\\\\\Delta _{vap}H(300.2K)=43,658\frac{J}{mol}=43.66\frac{kJ}{mol}[/tex]

Best regards!

HELPPp now plsss I really need help !!!!!

Answers

Answer:

The Forces that form each star would be your answer :)

What is the electron configuration of phosphorus

Answers

1s², 2s², 2p⁶, 3s², 3p⁵

Further explanation

Given

Phosphorus element

Required

The electron configuration

Solution

The energy level is expressed in the form of electron configurations.  

Writing electron configurations starts from the lowest to the highest sub-shell energy level. There are 4 sub-shells in the shell of an atom, namely s, p, d and f.

Charging electrons in the sub shell uses the following sequence:  

1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, 5p⁶, 6s², etc.  

Electron configurations are based on the number of electrons in the atomic number.

The atomic number of the phosphorus is 15, so the number of electrons is 15.

The configuration:

1s², 2s², 2p⁶, 3s², 3p⁵

Name the intermolecular force that corresponds to: an attraction between a partially positive region in one molecule and a partially negative region in another molecule. an attraction between two temporarily polarized molecules. an attraction between a negatively charged particle and a partially positive region in a molecule. an attraction between a partially positive hydrogen atom in a molecule and a partially negative and highly electronegative atom on another molecule.

Answers

Answer:

an attraction between a partially positive region in one molecule and a partially negative region in another molecule....dipole-dipole interaction

an attraction between two temporarily polarized molecules...dispersion forces

an attraction between a negatively charged particle and a partially positive region in a molecule....ion dipole interaction

an attraction between a partially positive hydrogen atom in a molecule and a partially negative and highly electronegative atom on another molecule....Hydrogen bonding

Explanation:

Some molecules have permanent dipole. As a result of this, the positive part of one molecule may attract the negative part of the other molecule leading to dipole-dipole interaction.

Dispersion forces occur in all molecules and is as a result of temporary polarization of a molecule due to instantaneous dipole–induced dipole attractions.

If a charged particle is attracted by a dipole in a molecule, we call it ion-dipole interaction.

When hydrogen is bonded to a highly electronegative element, the positive end of the dipole is on hydrogen while the negative end of the dipole is on the electronegative element. Molecular associations often result from this permanent dipole and is called hydrogen bonding, e.g, HF.

The reaction that occurs in a Breathalyzer, a device used to determine the alcohol level in a person's bloodstream, is given below. If the rate of appearance of Cr2(SO4)3 is 1.24 mol/min at a particular moment, what is the rate of disappearance of C2H6O at that moment

Answers

Answer:

The rate of disappearance of C₂H₆O = 2.46 mol/min

Explanation:

The equation of the reaction is given below:

2 K₂Cr₂O₇ + 8 H₂SO₄ + 3 C₂H₆O → 2 Cr₂(SO₄)₃ + 2 K₂SO₄ + 11 H₂O

From the equation of the reaction, 3 moles of C₂H₆O is used when 2 moles of Cr₂(SO₄)₃ are produced, therefore, the mole ratio of C₂H₆O to Cr₂(SO₄)₃ is 3:2.

The rate of appearance of Cr₂(SO₄)₃ in that particular moment is given 1.64 mol/min. This would than means that C₂H₆O must be used up at a rate which is approximately equal to their mole ratios. Thus,  the rate of of the disappearance of C₂H₆O can be calculated from the mole ratio of Cr₂(SO₄)₃ and C₂H₆O.

Rate of disappearance of C₂H₆O = 1.64 mol/min of  Cr₂(SO₄)₃  * 3 moles of C₂H₆O / 2 moles of Cr₂(SO₄)₃

Rate of disappearance of C₂H₆O = 2.46 mol/min of C₂H₆O

Therefore, the rate of disappearance of C₂H₆O = 2.46 mol/min

Which MOLECULES do cells need to get in order to function properly?

Answers

Answer:

they get animal cells

Explanation:

PLS HELLPPPP
Which of the following objects would have the greatest gravitational attraction between them if they were set 3.0 km apart?
A .20kg object and a 200kg object
A 10kg object and a 100kg object
A 30kg object and a 200,000kg object
A 400,000 kg object and a 100,000,000kg object

Answers

Answer:

A 400,000 kg object and a 100,000,000kg object

Explanation:

The objects with the most mass between them will have the greatest gravitational attraction.

This is why the last option is the right choice.

The reason for this is based on the Newton's law of universal gravitation which states that:

 "the gravitational force of attraction between two bodies is directly proportional to the product of their masses and inversely proportional to the square of the distance between them".

So, the more the mass, the greater the gravitational attraction between two bodies.

Which of the following is a list of the minimum amount of data needed for determining the molar enthalpy of solution of KCl(s) in pure H2O(1) ? (Assume that the KCl(aq) has the same specific heat capacity as pure water and that the initial temperatures of the KCl(s) and the water are the same.)
(A) Mass of KCl(s), initial temperature of the water, and final temperature of the solution
(B) Mass of H20, initial temperature of the water, and final temperature of the solution
(C) Mass of KCl(s), mass of H20, initial temperature of the water, and final temperature of the solution
(D) Mass of KCl(s), mass of H20, initial temperature of the water, final temperature of the solution, and atmospheric pressure

Answers

Answer:

 (C) Mass of KCl(s), mass of H20, initial temperature of the water, and final temperature of the solution

Explanation:

molar enthalpy of solution of KCl(s) is heat evolved or absorbed when one mole of KCl is dissolved in water to make pure solution . The heat evolved or absorbed can be calculated by the following relation.

Q = msΔt where m is mass of solution or water , s is specific heat and Δt is change in temperature of water .

So data required is mass of water or solution , initial and final temperature of solution , specific heat of water is known .

Now to know molar heat , we require mass of solute or KCl dissolved to know heat heat absorbed or evolved by dissolution of one mole of solute .

The correct option is option C.

To determine the molar enthalpy of the solution of [tex]Kcl(s)[/tex] is pure [tex]H_2O(l)[/tex]

We need to know that the,

grams of [tex]Kcl(s)[/tex]  grams of [tex]H_2O[/tex]  Initial temperature of [tex]H_2O[/tex]  The final temperature of the solution.  

Learn More:https://brainly.com/question/25758173

So I saw this question: If 28.0 grams of Pb(NO3)2 react with 18.0 grams of NaI, what mass of PbI2 can be produced? Pb(NO3)2 + NaI → PbI2 + NaNO3

I saw an answer that question but I need one part explained. The answer balanced the equation, but I do not know how they did that or why. They added a 2 to both sides and I do not know where it came from or why it made it balanced.

Answers

mass of PbI₂ = 27.6606 g

Further explanation

Given

Pb(NO₃)₂ + NaI → PbI₂ + NaNO₃

28.0 grams of Pb(NO₃)₂ react with 18.0 grams of NaI

Required

mass of PbI₂

Solution

Balanced equation

Pb(NO₃)₂ + 2NaI → PbI₂ + 2NaNO₃

The principle of a balanced reaction is the number of atoms in the reactants = the number of atoms in the product

mol Pb(NO₃)₂ :

= 28 : 331,2 g/mol

= 0.0845

mol NaI :

= 18 : 149,89 g/mol

= 0.12

Limiting reactant : mol : coefficient

Pb(NO₃)₂ : 0.0845 : 1 = 0.0845

NaI : 0.12 : 2 = 0.06

NaI limiting reactant (smaller ratio)

mol PbI₂ based on NaI

= 1/2 x 0.12 = 0.06

Mass PbI₂ :

= 0.06 x 461,01 g/mol

= 27.6606 g

You'll be given 100 points if you answer this question!!!!!!!!!!!!

3.
What do we call materials
that let heat pass through
them easily?
Thermal conductors
Thermal insulators
Transparent
4.
Which of these is a good
thermal conductor?
Plastic
Wood
Steel
5.
Which of these is a good
thermal insulator?
Steel
Iron
Polystyrene
6.
To save on heating bills, do
you think the roof of a
building should be lined with
a thermal conductor
a thermal insulator
nothing
7.
How does heat travel?
From cold things to hotter things
From hot things to colder things
Between things of the same temperature

Answers

Answer:conducts ,steel, polystyrene, thermal insulation

Explanation:

Write a balanced equation for the reaction of sodium phosphide with potassium chloride.

Answers

Answer:

Na3PO4 + KCl = NaCl + K3PO4

Explanation:

You have to know the Chemical Formula for Sodium phosphide, = Na3PO4 and Potassium chloride. which is = KCI

3(NaP)+3KCL→ 3NaCI+ K3P
Other Questions
Where could the instructions be held to create a protein? Janice drew a scale drawing of a house. The scale of the drawing was 1 inch : 3 feet. If the actual length of a rug in the hallway is 9 feet, how long is the rug in the drawing? Billiard ball A (0.35 kg) is struck such that it moves at 10 m/s toward asecond identical ball (Ball B). After the collision Ball A continues to movein the same direction at 2 m/s. What is the magnitude of the velocity forBall B after the collision?Before Collision:10 m/sAAfter Collision:2 m/sO please help me ASAP I need it What is the distance if each path in miles? i need help with this question 100 points to do this short response for me please ASAPPPPP I NEEDDD HELPPPP ASAAAPPPPPPPPPPPPPPPP Thiamine hydrochloride (vitamin B1 hydrochloride, HC12- H17ON4SCl2) is a weak acid with Ka 5 3.4 3 1027. Sup- pose 3.0 3 1025 g of thiamine hydrochloride is dissolved in 1.00 L of water. Calculate the pH of the resulting solution. (Hint: This is a sufficiently dilute solution that the autoion- ization of water cannot be neglected.) Find the value of x. *2x+632 Drag the tiles to the correct boxes to complete the pairs.Match each type of database to its applicationMultistageStationaryDistributedVirtualused for concise as well as detailedhistorical dataarrowRightused where access to data is rarearrowRightused for accessing data in diverseapplications using middlewarearrowRightused by an organization that runsseveral businessesarrowRight The total population of Aiken County is 173,000 and there are approximately 23,000 students enrolled in Aiken County schools. What percentage of Aiken County residents are enrolled in Aiken County schools? Round your answer to the nearest tenth. What is the most important organism on the food web?Provide a link to a resource if can. 3. What determines the frequency (color) of photons? In the Roman Republic, what was the responsibility of the assembly?Group of answer choicesmake religious decisionsestablish courtsmake lawsadvise elected officials What is f(+3) if f(x) = 5 x Find the x-intercept of the line:8x - 4y = -24 In its 2017 annual report, Campbell Soup Company reports beginning-of-the-year total assets of $7,837 million, end-of-the-year total assets of $7,726 million, total sales of $7,890 million, and net income of $887 million.Compute Campbell's asset turnover. (Round answer to 4 decimal places, e.g. 4.8726.) Find the indicated side of the triangle Which document is correctly paired with its author?Thomas Paine: Articles of ConfederationGeorge Washington: Virginia Bill of RightsThomas Jefferson: Declaration of IndependenceJohn Hancock: U.S. Constitution