After slowing down by 15 miles per hour and reducing the speed by one third, you are now going at 60 miles per hour.
What is the current speed after slowing down?If you are initially driving at a rate of one and a half miles per minute, it means you are traveling at a speed of 90 miles per hour (since there are 60 minutes in an hour).
In the second step, you slow down by 15 miles per hour. This reduces your speed to 75 miles per hour.
Finally, you reduce your speed by one third, which means you need to subtract one third of 75 from 75. One third of 75 is 25, so subtracting 25 from 75 gives you a speed of 50 miles per hour.
Therefore, after slowing down by 15 miles per hour and then reducing your speed by one third, you are now traveling at a speed of 50 miles per hour.
Learn more about Speed
brainly.com/question/17661499
#SPJ11
a current of 5.59 a in a long, straight wire produces a magnetic field of 2.23 μt at a certain distance from the wire. find this distance.
The distance from the wire is approximately 0.100 meters. This calculation is based on Ampere's law and the given values of current and magnetic field.
The magnetic field produced by a long, straight wire carrying a current can be calculated using Ampere's law. Ampere's law states that the magnetic field at a distance r from a long, straight wire carrying a current I is given by:
B = (μ₀I) / (2πr)
where B is the magnetic field, μ₀ is the permeability of free space (approximately 4π × 10^(-7) T·m/A), I is the current, and r is the distance from the wire.
In this case, we are given the current I as 5.59 A and the magnetic field B as 2.23 μT. To find the distance from the wire, we rearrange the formula:
r = (μ₀I) / (2πB)
Substituting the values:
r = (4π × 10^(-7) T·m/A × 5.59 A) / (2π × 2.23 × 10^(-6) T)
r ≈ 0.100 m
Therefore, the distance from the wire is approximately 0.100 meters.
The distance from the wire is approximately 0.100 meters. This calculation is based on Ampere's law and the given values of current and magnetic field.
To know more about Ampere's law visit:
https://brainly.com/question/17070619
#SPJ11
A rectangular loop with dimensions 4.20 cm by 9.50 cm carries current I. The current in the loop produces a magnetic field at the center of the loop that has magnitude 3.10×10−5 T and direction away from you as you view the plane of the loop. What are the magnitude and direction (clockwise or counterclockwise) of the current in the loop?
Answer:
1.63 A and in clockwise direction
Explanation:
The magnetic field due to the rectangular loop is :
[tex]$B=\frac{2 \mu_0 I}{\pi}\left(\frac{\sqrt{L^2+W^2}}{LW}\right)$[/tex]
Given : W = 4.20 cm
[tex]$=4.20 \times 10^{-2} \ m$[/tex]
L = 9.50 cm
[tex]$= 9.50 \times 10^{-2} \ m$[/tex]
[tex]$B = 3.40 \times 10^{-5} \ T $[/tex]
Rearranging the above equation, we get
[tex]$I=\frac{B \pi LW}{2 \mu_0\sqrt{L^2+W^2}}$[/tex]
[tex]$I=\frac{(3.40 \times 10^{-5}) \pi(9.50 \times 10^{-2})(4.20 \times 10^{-2})}{2(4 \pi \times 10^{-7})\sqrt{(9.50 \times 10^{-2})^2+(4.20 \times 10^{-2})^2}}$[/tex]
I = 1.63 A
So the magnitude of the current in the rectangular loop is 1.63 A.
And the direction of current is clockwise.
How would you classify an EM wave with a frequency of 10^7 Hz?
Answer:
I think it is television and radio wave
Bad codes. Which of these codes cannot be Huffman codes for any probability assignment? (a) {1,01,00}. (b) {00,01,10,110}. (c) (01,10}.
Among the given codes, code (b) {00,01,10,110} cannot be a Huffman code for any probability assignment.
Huffman coding is a prefix coding technique used for data compression, where the more frequent symbols are assigned shorter codes. A Huffman code is uniquely decodable, meaning no code is a prefix of another code. Based on this understanding, we can analyze each of the provided codes to determine if they can be valid Huffman codes.
Code (a) {1,01,00}: This code can be a valid Huffman code. The code lengths are distinct, and no code is a prefix of another code, satisfying the requirements.
Code (b) {00,01,10,110}: This code cannot be a Huffman code. The prefix "10" and "110" overlap, violating the prefix condition. Therefore, it cannot represent a valid Huffman code for any probability assignment.
Code (c) {01,10}: This code can be a valid Huffman code. The code lengths are distinct, and no code is a prefix of another code, meeting the requirements.
In conclusion, out of the given codes, only code (b) {00,01,10,110} cannot be a Huffman code for any probability assignment due to the overlapping prefix condition.
Learn more about Huffman code here:
https://brainly.com/question/31323524
#SPJ11
differences between mass and weight
Explanation:
Mass : -
1. It is the amount of mass present in an object.
2. SI unit : Kilograms ( kg )
3. Relation between Mass and Weight is W = mg.
Weight : -
1. It is the force with which it is attracted towards the centre of the earth.
2. SI unit : Newton ( N )
3. Relation between Mass and Weight is W = mg.
Mass is a measure of the amount of matter in an object, while weight is a measure of the force of gravity on the object.
Where do humans and other animals get their food? From only other animals From plants and other animals From only plants From the sun.
HELP PLZZZ
Answer:
Humans (which are omnivores) get their food from plants and other animals.
Some animals (omnivores) get their food from plants and other animals.
Some animals (carnivores) get their food from only other animals.
Some animals (herbivores) get their food from only plants.
Answer:
c
Explanation:
the luminous efficacy of a tungsten lamp is about 12 lumens/watt. what is the efficacy of a fluorescent tube (in lumens/watt)? group of answer choices 20 50 80 100
The efficacy of a fluorescent tube, in lumens/watt, is typically in the range of 50 to 100 lumens/watt.
Fluorescent tubes are more efficient than tungsten lamps in converting electrical energy into visible light. They generally have higher luminous efficacy due to their different technology and design. While the specific efficacy can vary depending on the tube's characteristics and design, a range of 50 to 100 lumens/watt is a common estimate for the efficacy of fluorescent tubes. Therefore, among the given options, the closest answer is 50 lumens/watt.
To learn more about fluorescent tube:
https://brainly.com/question/14397769
#SPJ11
Which best describes vibration?
0
the distance traveled per unit in time
the action of moving back and forth quickly and steadily
the distance between one compression and the compression next to it
the action of moving through a material or substance
which best describes vibration
Answer:
the distance between one compression and the compression next to it
Explanation:
Answer:
The one above this wrong.
The correct answer is b. The action of moving back and forth quickly and steadily
Explanation:
A visitor asks, "Why are the orbits of the planets elliptical?"
A) Because both the Sun and the other planets are pulling on each planet, which distorts a circular orbit into an ellipse. B) Because collisions between the planets that took place when the solar system was forming knocked the planets into orbits of this shape. C) This is the only shape that a planet's orbit can have; other types of objects like moons and stars can have orbits with different shapes.
D) This is the only shape an orbit can have that is stable so that the planet doesn't fall into the Sun or go shooting off into space.
The orbits of the planets are elliptical because both the Sun and the other planets are pulling on each planet, which distorts a circular orbit into an ellipse. The correct option is A.
The elliptical shape of the planets' orbits can be explained by gravitational forces acting between celestial bodies. According to Newton's law of universal gravitation, every object with mass exerts an attractive force on other objects. In the case of planets, their orbits are influenced by the gravitational pull of the Sun and the gravitational interactions with other planets in the solar system.
The combined gravitational forces of the Sun and other planets create a net force on each planet, causing its path to deviate from a perfect circle. The resulting gravitational pull distorts the circular orbit into an elliptical shape. This means that the distance between the planet and the Sun varies throughout its orbital path, with the closest point known as perihelion and the farthest point known as aphelion.
While other factors, such as collisions during the formation of the solar system, may have played a role in shaping the planets' orbits, the primary reason for their elliptical shape is the gravitational interaction between celestial bodies. The elliptical orbit is a stable configuration that allows the planet to maintain its trajectory without falling into the Sun or being ejected into space, as mentioned in option D.
To learn more about Planets click here
https://brainly.com/question/7439931
#SPJ11
: When an unbalanced force acts on an object, the force (1 Point) changes the motion of the object O is cancelled by another force does not change the motion of the object O is equal to the weight of the object
When an unbalanced force acts on an object, it changes the motion of the object.
When an unbalanced force is applied to an object, the net force acting on the object is not zero. According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. Therefore, when an unbalanced force is exerted on an object, it causes a change in the object's motion.
The direction and magnitude of the acceleration depend on the direction and magnitude of the unbalanced force. If the unbalanced force is greater than the opposing forces acting on the object (such as friction or air resistance), the object will experience a change in its velocity and undergo acceleration in the direction of the net force. This acceleration can result in the object speeding up, slowing down, or changing its direction of motion.
It is important to note that when the net force acting on an object is zero, the object remains in a state of either rest or constant velocity, as described by Newton's first law of motion. In this case, the object is said to be in equilibrium, and the forces acting on it are balanced. However, when an unbalanced force is present, it disrupts this equilibrium and causes a change in the object's motion.
To learn more about unbalanced force refer:
https://brainly.com/question/227461
#SPJ11
It is much more difficult to move a dresser full of clothes than an empty dresser
Answer:
Newton's Law 2
Hope this helps!
Which of the following describes half-life? Choose which apply.
A. Half-life is the amount of time it takes for half of a sample to decay.
B. The shorter the half-life, the more unstable the nuclide.
C. Half-life cannot be calculated for nuclides.
D. The longer the half-life, the more stable the nuclide
please answer correctly
A positive point charge and a negative point charge are inside a parallel plate capacitor The point charges interact only with capacitor, not with each other. Let the negative capacitor plate be the zero of potential energy for both charges. a. Draw the electric field vector inside the capacitor. b. Draw the forces acting on the two charges. c. Is the potential energy of the positive/negative point charge positive, negative, or zero? Explain. U
d. In which direction does the potential energy of the positive/negative charge decrease? Explain
a. From the positive plate towards the negative plate.
b. The positive point experiences a force directed opposite to the electric field vector, and the negative point experiences in the same direction.
c. The positive point charge is positive, while the negative point charge is zero.
d. The positive charge decreases as it moves towards the negative plate, while the negative charge remains constant.
a. Inside a parallel plate capacitor, the electric field vector is directed from the positive plate toward the negative plate. This field configuration arises due to the accumulation of a positive charge on the positive plate and an equal amount of negative charge on the negative plate.
The electric field vector lines are parallel and uniformly distributed between the plates.
b. The forces acting on the charges can be determined using the equation F = qE, where F is the force, q is the charge, and E is the electric field. The positive point charge will experience a force opposite to the electric field vector since it carries a positive charge.
Therefore, the force on the positive point charge will be directed toward the positive plate. The negative point charge, carrying a negative charge, will experience a force in the same direction as the electric field vector, towards the negative plate.
c. The potential energy (PE) of a point charge in an electric field can be calculated using the equation PE = qV, where q is the charge and V is the electric potential. In this scenario, the potential energy of the positive point charge will be positive.
This is because the positive point charge is moving from a lower potential (negative plate) to a higher potential (positive plate). On the other hand, the potential energy of the negative point charge is zero, as it is chosen as the zero reference point for potential energy.
In summary, inside a parallel plate capacitor, the electric field vector points from the positive plate to the negative plate. The positive point charge experiences a force towards the positive plate, while the negative point charge experiences a force towards the negative plate.
The potential energy of the positive point charge is positive, indicating a higher potential at the positive plate, while the potential energy of the negative point charge is zero, chosen as the reference point.
As the positive point charge moves towards the negative plate, its potential energy decreases, while the potential energy of the negative charge remains constant.
To learn more about charge, visit
https://brainly.com/question/30236242
#SPJ11
The gas in the precipitator behaves in a highly non-Ohmic manner--indeed, the current is proportional to the third power of the electric field! This means that the effective resistance of the gas depends strongly on the applied field. After a layer of dust has accumulated on the ground plate, the effective resistance of the gas is. Once a layer of dust has accumulated, the effective resistance rises to. What is the magnitude of the electric field between the plates when there is a layer of dust? When there is a layer? Assume that the potential difference between the plates remains constant. Hint: are the resistances in parallel or in series?
The magnitude of the electric field between the plates when there is a layer of dust is higher than when there is no layer of dust. The resistances are in seriesThe gas in the precipitator behaves in a highly non-Ohmic manner. The current is proportional to the third power of the electric field.
The effective resistance of the gas depends strongly on the applied field. After a layer of dust has accumulated on the ground plate, the effective resistance of the gas is increasing. Once a layer of dust has accumulated, the effective resistance rises to a high level. This increase in resistance is due to the layer of dust between the plates.The magnitude of the electric field between the plates when there is a layer of dustThe magnitude of the electric field between the plates when there is a layer of dust is higher than when there is no layer of dust.
The reason for this is that the resistance of the gas in the precipitator is higher when there is a layer of dust. This means that the potential difference between the plates must be increased to maintain the same current. The electric field between the plates is proportional to the potential difference between the plates divided by the distance between the plates. In series, the resistances add together. Therefore, the effective resistance of the gas in the precipitator is the sum of the resistance of the gas and the resistance of the layer of dust.
To know more about resistance visit :
https://brainly.com/question/32301085
#SPJ11
use molecular orbital theory to complete the ground state electron configuration for each of the molecules.
The ground state electron configurations for the molecules are:
Oxygen (O2): σ2s^2 σ*2s^2 σ2p^4 π2p^2
Nitrogen (N2): σ2s^2 σ*2s^2 σ2p^3 π2p^2
To determine the ground state electron configurations of the molecules using molecular orbital theory, we need to consider the molecular orbital diagram and the electron filling order.
Oxygen (O2):
The atomic configuration of oxygen is 1s^2 2s^2 2p^4. In molecular oxygen (O2), we combine the atomic orbitals to form molecular orbitals. The molecular orbital diagram for O2 is as follows:
The filling order for molecular orbitals is as follows: σ2s < σ2s < σ2p < π2p < π2p < σ*2p. According to Hund's rule, each orbital should be singly filled before pairing occurs.
The electron configuration for O2 can be obtained by filling the molecular orbitals with the valence electrons from each oxygen atom:
σ2s^2 σ*2s^2 σ2p^4 π2p^2
Nitrogen (N2):
The atomic configuration of nitrogen is 1s^2 2s^2 2p^3. In molecular nitrogen (N2), we combine the atomic orbitals to form molecular orbitals. The molecular orbital diagram for N2 is as follows:
The filling order for molecular orbitals is the same as in the case of oxygen: σ2s < σ2s < σ2p < π2p < π2p < σ*2p.
The electron configuration for N2 can be obtained by filling the molecular orbitals with the valence electrons from each nitrogen atom:
σ2s^2 σ*2s^2 σ2p^3 π2p^2
Using molecular orbital theory, we determined the ground state electron configurations for the molecules as follows:
Oxygen (O2): σ2s^2 σ*2s^2 σ2p^4 π2p^2
Nitrogen (N2): σ2s^2 σ*2s^2 σ2p^3 π2p^2
Please note that the electron configurations obtained through molecular orbital theory represent the ground state electronic distribution based on the available orbitals and their energy levels.
To learn more about electron, visit
https://brainly.com/question/26084288
#SPJ11
find the magnitude of the earth's centripetal acceleration as it travels around the sun. assume a year of 365 days.
To find the magnitude of the Earth's centripetal acceleration as it travels around the Sun, we can use the formula for centripetal acceleration: a = (v^2) / r
where a is the centripetal acceleration, v is the velocity of the Earth, and r is the radius of the Earth's orbit. The velocity of the Earth can be calculated using the formula: v = (2πr) / T. where T is the period of the Earth's orbit, which is the length of a year. Given that a year has 365 days, we can convert it to seconds by multiplying by 24 (hours), 60 (minutes), 60 (seconds): T = 365 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute. Now, we need to find the radius of the Earth's orbit. The average distance between the Earth and the Sun, known as the astronomical unit (AU), is approximately 149.6 million kilometers or 1.496 × 10^11 meters. Plugging the values into the equations: T = 365 * 24 * 60 * 60 = 31,536,000 seconds. r = 1.496 × 10^11 meters. Calculating the velocity: v = (2π * 1.496 × 10^11) / 31,536,000 ≈ 29,788 m/s. Finally, we can calculate the centripetal acceleration: a = (v^2) / r = (29,788^2) / (1.496 × 10^11) ≈ 0.00593 m/s^2. Therefore, the magnitude of the Earth's centripetal acceleration as it travels around the Sun is approximately 0.00593 m/s^2.
To learn more about magnitude, https://brainly.com/question/29751082
#SPJ11
The idea that force causes acceleration doesn't seem strange. This and other ideas of Newtonian mechanics are consistent with our everyday experience. Why do the ideas of relativity seem strange? 1. The effects of relativity become apparent only at very high speeds very uncommon to everyday experience. 2. Earth's rotation doesn't let us observe relativity that applies to systems moving in straight trajectories. arnold (ta 22957) Homework II 3. For the effects of relativity to become apparent large masses are needed. 4. The principles of relativity apply outside Farth.
The ideas of relativity seem strange : The effects of relativity become apparent only at very high speeds very uncommon to everyday experience. The correct option is 1.
The ideas of relativity seem strange compared to Newtonian mechanics because they involve phenomena that are not commonly observed in our everyday experiences.
One reason is that the effects of relativity become significant only at very high speeds, close to the speed of light. In our everyday lives, we rarely encounter speeds anywhere close to this magnitude, so we don't directly observe the relativistic effects. It is only in extreme situations, such as in particle accelerators or when studying objects moving at a significant fraction of the speed of light, that the predictions of relativity become apparent.
Another reason is that Earth's rotation and the motions of everyday objects typically occur at speeds much lower than the speed of light. Relativity primarily applies to systems moving in straight trajectories at high speeds, and the rotational motion of Earth doesn't allow us to easily observe these effects in our daily lives.
Additionally, for the effects of relativity to become apparent, very large masses are needed. In everyday scenarios, the masses involved are usually much smaller than those required to observe significant relativistic effects.
Lastly, the principles of relativity apply not just on Earth but also in any reference frame. They are not limited to our planet and are applicable to the entire universe. The correct option is 1.
To know more about relativity, refer here:
https://brainly.com/question/31293268#
#SPJ11
What happens to the volume of sound as the amplitude gets larger?
What happens when an object is moved against gravity, such as rolling a toy car up a
ramp?
a. Potential energy does not change
b. Potential energy decreases as it is transformed into kinetic energy
c. Kinetic energy does not change
d. Kinetic energy is transformed into potential energy
Answer:
gravitational force remain constant
we have that from the Question, it can be said that
What happens when an object is moved against gravity, such as rolling a toy car up is
Kinetic energy is transformed into potential energyOpion DFrom the Question we are told
What happens when an object is moved against gravity, such as rolling a toy car up
a. Potential energy does not change
b. Potential energy decreases as it is transformed into kinetic energy
c. Kinetic energy does not change
d. Kinetic energy is transformed into potential energy
Generally the equation for Kinetic energy is mathematically given as
K.E=1/2mv^2
Generally the equation for Potential energy is mathematically given as
P.E=mgh
Therefore
With increase in height of the car Kinetic energy is transformed into potential energy as g remains constant
Hence
What happens when an object is moved against gravity, such as rolling a toy car up is
Kinetic energy is transformed into potential energyOpion DFor more information on this visit
https://brainly.com/question/22610586?referrer=searchResults
The magnetic field of a solenoid is analogous to the electric field of a O charged wire O charged disk O charged parallel-plate capacitor O dipole O battery
The magnetic field of a solenoid is analogous to the electric field of a charged parallel-plate capacitor.
A solenoid is a long coil of wire wound tightly in the form of a cylinder. When an electric current flows through the solenoid, a magnetic field is generated inside it. This magnetic field is similar to the electric field that exists between the plates of a charged parallel-plate capacitor.
In both cases, the field lines are uniformly distributed and run parallel to each other. The strength of the field is proportional to the current for a solenoid and the charge for a capacitor.
Additionally, the magnetic field of a solenoid is similar to the electric field of a capacitor because they both exhibit a directional property, creating a preferred direction for the field lines.
To know more about magnetic field, refer here:
https://brainly.com/question/30331791#
#SPJ11
A positive point charge is placed at 5 cm from a negatively charged plate.
it is then pulled away from the plate, so it is 10 cm from the plate. Describe
what happened to the potential energy of the charge. (Hint what
happened to the force on the charge more force means more potential
energy) *
Answer: I'm not sure about this one, but you can go to this link to understand it better https://youtu.be/wEQxtUwiV1E.Its a Khan Academy Video Hope This Helps
Explanation:
Find the change in time (
t) it takes the magnetic field to drop to zero. (A loop of wire of radius 30 mm has electrical resistance 0.038 ohms. The loop is initially inside a uniform magnetic field of magnitude 1.8 T parallel to the loops axis. The magnetic field is then reduced slowly at a constant rate which induces a current 0.20 A in the loop.)
Approximately 6.375 seconds pass before the magnetic field disappears completely.
To find the change in time (Δt) it takes for the magnetic field to drop to zero, we can use Faraday's law of electromagnetic induction.
Faraday's law states that the induced electromotive force (EMF) in a loop of wire is equal to the rate of change of magnetic flux through the loop. Mathematically, it can be expressed as:
[tex]\begin{equation}EMF = -\frac{d\Phi}{dt}[/tex]
Where:
EMF is the electromotive force (voltage)
[tex]\frac{d\Phi}{dt}[/tex] is the rate of change of magnetic flux
In this case, the induced current in the loop is 0.20 A. We can use Ohm's law to relate the current, resistance, and voltage:
EMF = I * R
Where:
I is the current (0.20 A)
R is the resistance (0.038 ohms)
Since the magnetic field is reducing at a constant rate, we can assume that the rate of change of magnetic flux is constant.
The magnetic flux (Φ) through the loop is given by:
Φ = B * A
Where:
B is the magnetic field (1.8 T)
A is the area of the loop (π * r²)
Substituting the values:
Φ = (1.8 T) * (π * (0.03 m)²)
= 0.051 m² * T
Now, we can equate the two equations for EMF:
[tex]\begin{equation}EMF = -\frac{d\Phi}{dt}[/tex]
[tex]\begin{equation}I \cdot R = -\frac{d\Phi}{dt}[/tex]
Rearranging for dt:
[tex]\begin{equation}dt = -\frac{d\Phi}{I \cdot R}[/tex]
Substituting the values:
[tex]\begin{equation}dt = -\frac{0.051\text{ m}^2 \cdot T}{0.20\text{ A} \cdot 0.038\text{ ohms}}[/tex]
[tex]\begin{equation}= -\frac{0.051}{0.008\text{ s}}[/tex]
= -6.375 s
The negative sign indicates that the time is decreasing. However, we are interested in the magnitude of the time, so we can take the absolute value:
Δt = |dt| = 6.375 s
Therefore, the change in time it takes for the magnetic field to drop to zero is approximately 6.375 seconds.
To know more about the EMF refer here :
https://brainly.com/question/22055509#
#SPJ11
What types of metal solids, (Other then aluminum foil) Would be able to work just like it?
The type of metal solids other then aluminum foil would be able to work is Copper,Tin,Stainless steel,Brass,Nickel and Silver foils.
There are several types of metal solids that can work similarly to aluminum foil in certain applications. Some options include:
1. Copper foil: Copper foil has good electrical conductivity and is often used in electrical and electronic applications, including circuit boards and electromagnetic shielding.
2. Tin foil: Tin foil, also known as tinfoil, is a thin sheet of tin. It is commonly used for wrapping food items and has similar properties to aluminum foil.
3. Stainless steel foil: Stainless steel foil is resistant to corrosion and has high strength. It can be used for various applications, such as heat exchangers, laboratory equipment, and packaging.
4. Brass foil: Brass foil is an alloy of copper and zinc, which provides good electrical and thermal conductivity. It can be utilized in applications similar to copper foil.
5. Nickel foil: Nickel foil has excellent resistance to corrosion and high-temperature environments. It is commonly used in battery manufacturing, aerospace components, and chemical processing.
6. Silver foil: Silver foil is highly conductive and often used in specialized applications where high conductivity is required, such as in certain types of electronic circuits and sensors.
These metal foils may not be as readily available or as widely used as aluminum foil, but they can serve specific purposes depending on their unique properties. It's important to consider factors such as electrical conductivity, thermal conductivity, corrosion resistance, and cost when selecting the appropriate metal foil for a particular application.
For more such questions on metal solids,click on
https://brainly.com/question/16839220
#SPJ8
A heavy piano is pushed up an inclined plane into a moving van. Which of the following choices best explains how the inclined plane made the task easier?
1. The force needed to move the piano up the plane was less than the force needed to lift it straight up into the van, but the distance over which the piano moved was greater.
2.The force exerted on the piano was the same as if it had been lifted, but the distance it needed to be move decreased, so the total work decreased.
3.The distance that the piano was moved was less that the distance it would have had to be lifted, so the total work decreased.
4. The amount of force need to push the piano up the ramp is the same as the force needed to lift it, so the amount of work remained the same.
The term mechanical advantage has to do with the ratio of the load to the effort.
What is mechanical advantage?
The term mechanical advantage has to do with the ratio of the load to the effort. There is a mechanical advantage when the effort applied is less than the load.
Hence, the task is made easier because the force needed to move the piano up the plane was less than the force needed to lift it straight up into the van, but the distance over which the piano moved was greater.
Learn more about mechanical advantage:https://brainly.com/question/20521425
#SPJ1
Light travels at a speed of 3.0 ´ 108 m/s. If it takes light from the sun 5.0 ´ 102 s to reach Earth, what is the distance between Earth and the sun?
Answer:
The distance between the Earth and the Sun is:
1.5 multiplied by 10 raised to the power 8 km
Explanation:
(5.0 x 10²) x (3.0 x 10⁸) = 1.5 x 10¹¹ meters = 1.5 x 10⁸ km.
what must you do to maintain steerage on a personal water craft? you must apply the throttle apply the brakes and turn hard drag a foot in the water
To maintain steerage on a personal watercraft, you must apply the throttle, apply the brakes and turn hard, and drag a foot in the water,as you move forward, the watercraft will start moving in the direction you want it to go
Steering a personal watercraft is not as simple as it looks. It can be dangerous and can lead to accidents if the rider does not know how to handle the watercraft. To maintain steerage on a personal watercraft, you must first apply the throttle. As you move forward, the watercraft will start moving in the direction you want it to go. Applying the brakes and turning hard will help you steer the watercraft in the desired direction.
This is achieved by slowing down the watercraft and allowing it to turn naturally in the water. The final step is to drag a foot in the water. This is important when you want to make a sharp turn. Dragging a foot in the water helps to create a pivot point that helps you turn the watercraft in the desired direction, this technique is also used to help you maintain balance on the watercraft. So therefore to maintain steerage on a personal watercraft, you must apply the throttle, apply the brakes and turn hard, and drag a foot in the water,as you move forward, the watercraft will start moving in the direction you want it to go.
To know more about pivot point visit:
https://brainly.com/question/31261482
#SPJ11
how can isotopes of a given element be identified?
Answer: All isotopes of a given element have the same number of protons but different numbers of neutrons in each atom. ... Each atomic number identifies a specific element, but not the isotope; an atom of a given element may have a wide range in its number of neutrons.
Explanation: Hopefully this helps. Have a great day.
it took 500 n of force to push a car 4 meters. how much work was done?
Answer:
2000J
Explanation:
The formula for work is W=Force x Distance
W=FxD
W=500N x 4m
W=2,000 Joules
A student watches as a trash can lid moves across a yard. Which of these could have caused the trash can lid to move?
Answer:
wind energy
Explanation:
Wind energy can be defined as a form of a solar energy. It is generated by the immense force of the wind that blows in an area. Wind energy is a useful energy and is mostly used to generate electricity. It is clean source of energy.
In the context, trash can lid is being blown away by the wind energy and it is seen moving across the yard. The energy of the wind forces the lid of the trash can to move from one place to another against friction. Thus, wind energy caused the trash can lid to move across the yard as seen by a student.
AM and FM stand for two different processes that are used to code voices and music for transmission. What does AM stand for? 1. Amplitude Modulation 2. Amplitude Mediation A
Answer:
1. Amplitude Modulation
Explanation:
AM is an acronym for Amplitude Modulation and it's refers to a process that is typically used for coding sounds such as voices and music for transmission from one point to another.
On the other hand, FM is an acronym for frequency modulation used for the propagation and transmission of sound waves.
Basically, the two forms of modulation are used for broadcasting in radio transmission.
Electromagnetic waves is a propagating medium used in all communications device to transmit data (messages) from the device of the sender to the device of the receiver.
Generally, the most commonly used electromagnetic wave technology in telecommunications is radio waves.
Radio waves can be defined as an electromagnetic wave that has its frequency ranging from 30 GHz to 300 GHz and its wavelength between 1mm and 3000m. Therefore, radio waves are a series of repetitive valleys and peaks that are typically characterized of having the longest wavelength in the electromagnetic spectrum.