If you see a large “H” on the weather map, what type of weather can you expect there?

Answer:

radio waves

Explanation:

the answer is simple, radio waves. it is radio waves because when you look at the diagram the waves below Radio are very long. if you look at the waves under gamma ray, they are very short. radio is the longest wave while gamma is the shortest. if you are still confused it also says longer wavelength and low frequency( meaning it is safe) right under the wavelength.

The concentration of arsenic in milk, which is 3.57 μg/L, can be converted to ounces per gallon. The correct answer is option D) 3.84 x 10^4 oz/gal.

To convert the concentration of arsenic from micrograms per liter (μg/L) to ounces per gallon (oz/gal), we need to follow a series of conversion steps. First, we need to convert micrograms (μg) to grams (g). There are 1,000 micrograms in a milligram (mg) and 1,000 milligrams in a gram, so 3.57 μg is equivalent to 0.00357 mg. Next, we need to convert milliliters (mL) to gallons (gal). Since 1 liter (L) is equal to 1,000 milliliters (mL) and 1 gallon is approximately 3,785.41 milliliters, we can calculate that 946.4 mL is approximately 0.25 gallons. Now, we can calculate the concentration in ounces per gallon. One pound (lb) is equal to 16 ounces (oz), and we know that 1 lb is approximately 0.4536 kg. Since 1 gallon is equal to 4 quarts (qt), and 1 quart is equal to 32 ounces, we can multiply all the conversion factors together:

0.00357 mg/L * 0.25 gal * 16 oz/lb * (1 lb/0.4536 kg) = 3.84 x 10^4 oz/gal

Therefore, the concentration of arsenic in ounces per gallon is approximately 3.84 x 10^4 oz/gal, which corresponds to option D).

Learn more about micrograms here: https://brainly.com/question/30401137

#SPJ11

Answer:

30 liters

Explanation:

Answer:

Explanation:

Find the molar mass of H2SO4

2H = 2 * 1 = 2

S  = 1 * 32 =32

O4 = 4*16 = 64

total             98

Find the number of mols in 71.5 grams

mols = given mass / molar mass.

given mass = 71.5

molar mass = 98

mols = 71.5/98

mols = 0.7296 mols of H2SO4

Find the moles of H2O

From the Balanced equation, every mol of H2SO4 produces 2 moles of H2O

mols water = 2 * 0.7296

mols water = 1.4592

That's as far as I can take you. I have to know a great deal more to get the volume of H2O

Answer:57.6 kJ

Explanation:

Considering the energy diagram for an exothermic reaction, the expectations for the reverse reaction is: (c) The reverse reaction would be endothermic and require a higher activation energy.

In an exothermic reaction, the products have lower energy than the reactants, resulting in the release of energy. The energy diagram for an exothermic reaction typically shows a downward slope from the reactants to the products, with the energy of the products being lower than the energy of the reactants.

When considering the reverse reaction of an exothermic reaction, it would involve the conversion of products back into reactants. Since the energy diagram for the forward reaction shows a decrease in energy from reactants to products, the reverse reaction would be expected to have an increase in energy from products to reactants.

In the reverse reaction, energy would need to be absorbed from the surroundings, making it an endothermic process. Additionally, the activation energy for the reverse reaction is expected to be higher because the reverse reaction has to overcome a higher energy barrier to convert the products back into the reactants.

To know more about the energy diagram refer here :

https://brainly.com/question/29358205#

#SPJ11

Answer:

2 CoBr3 + 3 CaSO4 = 3 CaBr2 + Co2(SO4)2

Explanation:

There are 0.893 moles of gas present in the sample.

The ideal gas law is PV = nRT, which expresses the relationship between the pressure, volume, temperature, and amount of gas present. We can use this equation to find the number of moles of gas present in a sample. Here's how: PV = nRTn = PV / RT, where P is the pressure in atm, V is the volume in litres, T is the temperature in Kelvin, R is the universal gas constant (0.0821 L atm/mol K), and n is the number of moles of gas. Let's convert the volume to litres and the temperature to Kelvin. 4,372 ml = 4.372 L, and 32.3 °C + 273.15 = 305.45 K. Now we can plug in the values: n = (5.7 atm) (4.372 L) / (0.0821 L atm/mol K) (305.45 K)n = 0.893 mol.

Therefore, there are 0.893 moles of gas present in the sample.

know more about ideal gas law,

https://brainly.com/question/30458409

#SPJ11

Answer:

A continuous color sequence is a pattern that can be used to determine if paint chips are missing from the set. If the color change from chip to chip is not continuous, a chip is probably missing. This pattern is useful to display paint chips for customers.

Explanation:

seaborgium Is a type of corn that is grown in warm countries.

answer is SG

Answer:

269 u

Explanation:

The element Cu₂O (copper(I) oxide) contains a +1 oxidation state. Option E is correct.

This is because oxygen (O) typically has a -2 oxidation state, and since there are two oxygen atoms in Cu₂O, their combined oxidation state is -4. Therefore, in order for the compound to be electrically neutral, the oxidation state of copper must be +1.

CO₂ (carbon dioxide) contains carbon (C) in a +4 oxidation state and oxygen (O) in a -2 oxidation state.

PbO₂ (lead(IV) oxide) contains lead (Pb) in a +4 oxidation state and oxygen (O) in a -2 oxidation state.

CaO (calcium oxide) contains calcium (Ca) in a +2 oxidation state and oxygen (O) in a -2 oxidation state.

N₂O₅ (dinitrogen pentoxide) contains nitrogen (N) in a +5 oxidation state and oxygen (O) in a -2 oxidation state.

Hence, E. is the correct option.

To know more about oxidation state here

https://brainly.com/question/31688257

#SPJ4

--The given question is incomplete, the complete question is

"Which of the following contains an element in a +1 oxidation state? A) CO₂, B) PbO₂, C) CaO, D) N₂O₅, E) Cu₂O

Answer:

Solute - The solute is the substance that is being dissolved by another substance. In the example above, the salt is the solute. Solvent - The solvent is the substance that dissolves the other substance.

Explanation:

Part 1: Cu(s) + 4 HNO₃(aq) ⇒ Cu(NO₃)2(aq) + 2 NO₂(g) + 2 H₂O(l) is a redοx reactiοn

The reactants and prοducts are placed οn the left and right sides οf the arrοw, respectively, tο create a balanced equatiοn. Cοefficients, which appear as a number befοre a chemical fοrmula, represent mοles οf a cοmpοund. The number οf atοms in a single mοlecule is indicated by the subscripts (numbers belοw an atοm).

When catiοns and aniοns in an aqueοus sοlutiοn react tο generate a precipitate, an insοluble iοnic sοlid, precipitatiοn prοcesses take place. The sοlubility principles fοr typical iοnic sοlids can be used tο determine whether οr nοt such a reactiοn takes place.

Part 2: Cu(NO₃)₂(aq) + 2NaOH(aq) ⇒ Cu(OH)2(s) + 2NaNO₃(aq) is a dοuble displacement reactiοn οr a precipitatiοn reactiοn.

Part 3: Cu(OH)₂ (s) ⇒ CuO(s) + H₂O(l)  is a Decοmpοsitiοn reactiοn

Part 4: CuO(s) + H₂SO₄(aq) ⇒ CuSO₄(aq) + H₂O(l)  is an acid-base neutralizatiοn reactiοn.

Part 5: Zn(.s) + CuSO₄(aq) ⇒ Cu(s) + ZnSO₄(aq) is a displacement reactiοn

To learn more about cations  :

https://brainly.com/question/1176627

#SPJ4

The complete and balanced half-reaction for [tex]Sn^{2+}[/tex] → Sn** in the acidic solution can be given as follows: [tex]Sn^{2+}[/tex](aq) → [tex]Sn^{4+}[/tex](aq) + 2[tex]e^-[/tex] (oxidation half-reaction)

Here, [tex]Sn^{2+}[/tex] undergoes oxidation to [tex]Sn^{4+}[/tex]. In this reaction, the oxidation state of Sn changes from +2 to +4. It means Sn loses 2 electrons in this reaction. Hence, it is an oxidation half-reaction.

2[tex]H^+[/tex](aq) + 2e- → [tex]H_2[/tex](g) (reduction half-reaction)

This half-reaction represents the reduction of [tex]H^+[/tex] ions. In this reaction, [tex]H^+[/tex] ions gain 2 electrons to form [tex]H_2[/tex]. This reaction occurs in an acidic solution.

Therefore, to obtain a completely balanced reaction, we have to combine both half-reactions as follows:

[tex]Sn^{2+}[/tex](aq) + 2[tex]H^+[/tex](aq) → [tex]Sn^{4+}[/tex](aq) + [tex]H_2[/tex](g)

Learn more about redox reactions here:

https://brainly.com/question/28300253

#SPJ11

The energy of an electron in a hydrogen atom can be determined based on its quantum state. In the ground state, the energy of the electron is -13.6 eV.

In a hydrogen atom, the energy of the electron is quantized, meaning it can only exist in certain discrete energy levels. The ground state is the lowest energy level, where the electron resides when it is not excited. The energy of the electron in the ground state is a well-known constant value of -13.6 eV.

When the hydrogen atom is excited to an excited state, such as the n=5 level, the energy of the electron in that level can be determined using the formula E = -13.6 eV/n^2. Here, n represents the principal quantum number, which corresponds to the energy level. Plugging in n=5 into the formula, we find that the energy of the electron in the n=5 level is -13.6 eV/5^2 = -0.544 eV.

In summary, the energy of an electron in a hydrogen atom depends on its quantum state. The ground state has an energy of -13.6 eV, while an excited state, such as the n=5 level, can be calculated using the formula E = -13.6 eV/n^2. For the n=5 level, the energy of the electron is -0.544 eV.

To learn more about hydrogen - brainly.com/question/28819966

#SPJ11

A polymer which is expected to exhibit the lowest degree of crystallinity is an atactic tacticity (Option A).

Tacticity is the configuration or spatial arrangement of monomer units in a polymer chain with respect to each other. It defines the regularity of the orientation of the pendant groups that are attached to the main chain of the polymer. Tacticity is a critical element that determines the physical and chemical properties of the polymer.

The three types of tacticities are atactic, isotactic, and syndiotactic. Atactic polymers have no specific tacticity because their pendant groups are randomly arranged with respect to each other. Since atactic polymers lack long-range order, they have the lowest degree of crystallinity.

Isotactic polymer have all of their pendant groups arranged in the same orientation, with respect to the main chain. As a result, these polymers have a high degree of crystallinity. Syndiotactic polymers have pendant groups that alternate in orientation along the main chain. The degree of crystallinity in syndiotactic polymers is moderate.

The degree of crystallinity for each type of polymer depends on the extent to which their pendant groups align, which affects their chain packing and orientation in the solid-state.

Thus, the correct option is A.

Learn more about tacticity: https://brainly.com/question/31663775

#SPJ11

Answer:

1. A

2. B

Explanation:

Answer:

Problem: What is the effect of the amount of fish feed on the mass of goldfish?

Hypothesis: I think that feeding the goldfish four times a day will greatest increase in the mass of the goldfish.

Explanation:

The problem tends to ask question to which the research is conducted. It open ways for ideas towards a particular topic.

While the hypothesis is a tentative or assumed stand on a subject. It is further tested through an experiment or survey and if after many trials it gives same results and the obtained results is concordant with the hypothesis, the hypothesis will then become accepted and a theory or law is formed thereafter.

Answer: dissolves

Explanation:

When you stir a spoonful of sugar into a glass of water, you are forming a solution. This type of liquid solution is composed of a solid solute, which is the sugar, and a liquid solvent, which is the water. As the sugar molecules spread evenly throughout the water, the sugar dissolves.

Answer:

1150g

Explanation:

The equation for producing sulphur dioxide is [tex]S + O_{2} ==> SO_{2}[/tex]

Looking at the ratios, you need 1 mole of sulphur for every 1 mole of sulphur dioxide

Sulphur dioxide has a molar mass of 32 + (2 x 16) = 64g

2.30 x 1000 = 2300

2300 / 64 = 35.9375

35.9375 x 32 = 1150g of sulphur

If a 0.9% saline solution is isotonic to a cell, a 0.5% saline solution would be hypotonic. A hypotonic solution has a lower solute concentration compared to the cell. Hence, the correct answer is:

A 0.5% saline solution would result in water osmosing into the cell.

In a hypotonic solution, water tends to move from an area of lower solute concentration (outside the cell) to an area of higher solute concentration (inside the cell) in order to equalize the concentration on both sides. This can lead to an influx of water into the cell, potentially causing it to swell or burst (lysis) depending on the cell type.

It's important to note that a hypertonic solution has a higher solute concentration compared to the cell, which would result in water osmosing outside of the cell. In the given scenario, a 0.5% saline solution is hypotonic, not hypertonic. Therefore, the correct answer is:

A 0.5% saline solution would result in water osmosing into the cell.

The given question is incomplete and the completed question is given as,

If 0.9% saline solution is isotonic to a cell, 0.5% saline solution

Answers

Learn more about Osmosis from the link given below.

https://brainly.com/question/31028904

#SPJ4

In the given reaction CH3COOH → CH3COO^- + H+, the statement "CH3COO^- is a conjugate base" is true.The statement "CH3COO^- is a conjugate base" is true for the given reaction.

In the Brønsted-Lowry theory of acids and bases, an acid is a species that donates a proton (H+), while a base is a species that accepts a proton. In this reaction, CH3COOH donates a proton to form CH3COO^- and H+. The species that remains after the acid donates a proton is called the conjugate base.

In the reaction, CH3COOH acts as the acid by donating a proton, and CH3COO^- is the species that forms after the donation. Since CH3COO^- accepts the proton, it is considered the conjugate base of CH3COOH.

To determine whether a species is an acid or a base, we need to consider its behavior in a given reaction. In this case, CH3COOH donates a proton, making it the Brønsted-Lowry acid, while CH3COO^- accepts the proton, making it the conjugate base.

For more such questions on conjugate base

https://brainly.com/question/28979448

#SPJ8

The heat transferred to the gas equals the total of the change in thermal energy and the work done on the gas, according to the first law of thermodynamics. During an isochoric process the work is zero. In process with a constant pressure with increasing temperature some energy leaves the system as work.

The heat provided to a gas (Q) equals the change in thermal energy (U) plus the work performed by the gas (W), as stated by the first law of thermodynamics. During an isochoric (constant volume) process, the work done by the gas is zero (W = 0) because there is no change in volume. In this case, all the heat energy transferred to the gas increases its thermal energy, resulting in a larger temperature increase and a larger molar specific heat at constant volume.

In a process with a constant pressure (isobaric), the gas can expand and do work against the external pressure. As the gas expands, it does work by pushing against the external pressure, and some of the heat energy is used to perform this work. Therefore, less heat energy is available to solely increase the thermal energy of the gas. This results in a smaller temperature increase compared to the constant volume process, leading to a smaller molar specific heat at constant pressure.

To know more about thermodynamics, visit,

https://brainly.com/question/13059309

#SPJ4

Answer:

True mark brainlest

Explanation:

Answer:

H⁣⁣⁣⁣ere's l⁣⁣⁣ink t⁣⁣⁣o t⁣⁣⁣he a⁣⁣⁣nswer:

bittuly/3a8Nt8

Explanation:

According to molar concentration, molarity of the resulting solution is 4.32 molar.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.Substitution in formula M₁V₁=M₂V₂ gives M₂=6.2×2/3=4.32 M.

Learn more about molar concentration,here:

https://brainly.com/question/13980327

#SPJ2

The formula for phosphorous acid is H₃PO₃. It can also be written as HPO(OH)₂, which is the hydrated form of the compound.

Phosphorous acid is a diprotic acid that contains one P(III) center and two -OH groups. It is a colorless and odorless solid that is highly soluble in water. When it is dissolved in water, it can act as a reducing agent because it can easily donate electrons. The formula for phosphate is PO₄³⁻. It is a polyatomic ion that contains one central phosphorus atom and four oxygen atoms arranged in a tetrahedral structure.

Phosphate has a negative three charge and is commonly found in minerals such as apatite. The formula for phosphite is PO₃³⁻. It is a polyatomic ion that contains one central phosphorus atom and three oxygen atoms arranged in a trigonal pyramidal structure. Phosphite has a negative two charge and is commonly used as a reducing agent and a chelating agent in chemical reactions involving metal ions.

The formula for phosphorus is P. It is a chemical element that has the atomic number 15 and the symbol P. Phosphorus is a nonmetal that is essential for life and is found in DNA, RNA, and ATP. It is also used in the production of fertilizers, detergents, and other industrial chemicals.

You can learn more about apatite at: brainly.com/question/17134906

#SPJ11

Equilibrium in a chemical reaction is reached when the rates of the forward and reverse reactions become equal. For a reversible reaction, the equilibrium constant is the ratio of the concentrations of the products to the concentrations of the reactants at equilibrium.

The following variables need to remain constant for an equilibrium constant and position to remain constant:

know more about equilibrium constant

https://brainly.com/question/29809185

#SPJ11