if you radioactively labelled nadh and fadh2, you would observe that the radioactivity would be transported at the

B. The major source of sulfur dioxides is fuel combustion, such as burning coal and oil in power plants and other industrial processes.

The fundamental chemical process of releasing energy from a fuel and air combination is combustion, sometimes referred to as burning. While natural erosion of soils can release small amounts of sulfur dioxide, it is not a significant contributor to the levels we see in the atmosphere. Industrial processing, such as refining metals and producing chemicals, can also release sulfur dioxide, but to a lesser extent than fuel combustion. Road traffic can contribute to air pollution, but sulfur dioxide emissions from cars and trucks are generally lower than those from industrial sources.

Learn more about combustion here:

brainly.com/question/24703998

#SPJ11

The correct answer is c. Carbon monoxide. Poisoning has been implicated in many rush-hour traffic accidents. Carbon monoxide is a colorless, odorless gas that can be produced by the incomplete burning of fossil fuels, such as gasoline, in vehicles. When inhaled, carbon monoxide can interfere with the body's ability to transport oxygen, leading to dizziness, confusion, and even death. It is important to make sure vehicles are properly maintained and that exhaust systems are functioning correctly to prevent carbon monoxide poisoning.
Carbon monoxide poisoning has been implicated in many rush-hour traffic accidents, as it can lead to symptoms such as dizziness, confusion, and impaired coordination, which can affect a driver's ability to operate a vehicle safely.

To know about pathways about human body pathway poisoning, click here:-

https://brainly.com/question/30156446

#SPJ11

A(n) compound is a substance with a fixed composition of atoms of two or more different elements that are bonded together.

Reason being A chemical compound is a chemical substance composed of many identical molecules containing atoms from more than one chemical element held together by chemical bonds. A molecule consisting of atoms of only one element is therefore not a compound.

To learn more about chemical compounds, click on this -

brainly.com/question/12166462

#SPJ11

Answer: HOCl is considered the primary product when chlorine is added to water.

When chlorine is added to water, it reacts with water to form a mixture of hypochlorous acid (HOCl) and hydrochloric acid (HCl) as the primary products. The exact ratio of these products depends on the pH of the water. In acidic solutions, more HCl is formed, while in basic solutions, more HOCl is formed. HOCl is a powerful disinfectant and is commonly used in water treatment to kill bacteria, viruses, and other harmful microorganisms. It works by disrupting the cell membranes of these microorganisms, which causes them to die. However, HOCl can also react with organic compounds in the water to form harmful byproducts, such as trihalomethanes, which can pose a health risk. To minimize the formation of harmful byproducts, water treatment plants carefully control the amount of chlorine added to the water and adjust the pH of the water to optimize the formation of HOCl. Overall, the addition of chlorine to water is an important step in ensuring safe and clean drinking water for the public.

Learn more about HOCl  here:

https://brainly.com/question/9440783

#SPJ11

A. True. Potassium-40 is a radioactive isotope that undergoes beta decay to produce argon-40 as a daughter product.

Potassium-40 is a radioactive isotope that occurs naturally in the Earth's crust. It has a half-life of 1.3 billion years and undergoes beta decay to produce calcium-40 and argon-40 as daughter products. However, most of the time, potassium-40 decays to produce argon-40, which is a noble gas and therefore very stable. This process is used in geology to date rocks and minerals, as the ratio of potassium-40 to argon-40 can be used to determine the age of a rock or mineral. The decay of potassium-40 to argon-40 is also used in various scientific fields, including biology, where it is used in potassium-argon dating to determine the age of fossils and archaeological materials.

Learn more about Potassium-40  here:

https://brainly.com/question/13321031

#SPJ11

5/4 is the fraction value for 125%.  A fraction consists of two components. The numerator is the figure at the highest point of the queue.

The components of a whole and group of items are represented by fractions. A fraction consists of two components. The numerator is the figure at the highest point of the queue. It details the number of equal portions that were taken from the total or collection.  The denominator is the figure that appears below the line.  It displays the total amount of identical objects within a collection or the total amount of equal sections that the collection is divided into.

125%= 125/100=5/4

To know more about fraction, here:

https://brainly.com/question/10354322

#SPJ1

Catalytic converters work to reduce carbon monoxide, hydrocarbons, and nitrogen oxides, but they do not directly reduce carbon dioxide emissions.option (d)

Carbon dioxide is a byproduct of the combustion reaction that occurs in the engine, and catalytic converters do not directly affect this process.

However, some newer catalytic converters may have an additional mechanism, such as an oxygen sensor, that can indirectly reduce carbon dioxide emissions by improving the fuel efficiency of the engine. Overall, catalytic converters are an important component of reducing harmful emissions from vehicles and improving air quality.

Learn more about Catalytic converters

https://brainly.com/question/15591051

#SPJ4

The total amount of energy necessary to break apart 2 moles of H2 molecules and 1 mole of O2 molecules is 1370 kJ.

To calculate the total amount of energy required to break apart 2 moles of H2 molecules and 1 mole of O2 molecules, we need to consider the bond dissociation energy of each type of bond.
1. H2 molecule has one H-H bond with a bond dissociation energy of approximately 436 kJ/mol.
2. O2 molecule has one O=O double bond with a bond dissociation energy of approximately 498 kJ/mol.
Step 1: Calculate the energy required to break H2 molecules.
Energy for H2 = 2 moles * 436 kJ/mol = 872 kJ
Step 2: Calculate the energy required to break O2 molecules.
Energy for O2 = 1 mole * 498 kJ/mol = 498 kJ
Step 3: Add the energies calculated in steps 1 and 2 to find the total energy.
Total energy = Energy for H2 + Energy for O2 = 872 kJ + 498 kJ = 1370 kJ
The total amount of energy necessary to break apart 2 moles of H2 molecules and 1 mole of O2 molecules is 1370 kJ.

Learn more about energy here

https://brainly.com/question/1371184

#SPJ11

The molecule that has a trigonal-pyramidal molecular geometry is B. [tex]NH_{3}[/tex]

To understand why [tex]NH_{3}[/tex] has a trigonal-pyramidal molecular geometry, we need to look at its Lewis structure. The nitrogen atom has five valence electrons, and each hydrogen atom has one valence electron. Therefore, the total number of valence electrons in [tex]NH_{3}[/tex] is 8. In the Lewis structure, the nitrogen atom is placed in the center with three hydrogen atoms surrounding it, each forming a single covalent bond with the nitrogen atom. This structure has one lone pair of electrons on the nitrogen atom.

To determine the molecular geometry, we use the VSEPR theory, which states that electron pairs around a central atom will arrange themselves in such a way as to minimize repulsion. In [tex]NH_{3}[/tex], there are four electron pairs around the nitrogen atom - three bonding pairs and one lone pair. The bonding pairs repel each other, as do the lone pair and bonding pairs. The repulsion causes the molecule to take on a trigonal-pyramidal shape, with the three hydrogen atoms at the base and the lone pair at the apex of the pyramid.

In summary, [tex]NH_{3}[/tex] has a trigonal-pyramidal molecular geometry because of the repulsion between the bonding and lone pairs of electrons around the nitrogen atom. Therefore, Option B is correct.

Know more about Lewis Structure here:

https://brainly.com/question/20300458

#SPJ11

The term for the value corresponding to the number of atoms in 12.01 g of carbon is Avogadro's number.

Avogadro's number is defined as the number of atoms or molecules in one mole of a substance. One mole of any substance contains 6.022 x 10²³ atoms or molecules. This value is essential in chemistry as it allows scientists to relate the mass of a substance to the number of atoms or molecules present.

For example, if we know the mass of a substance, we can calculate the number of atoms or molecules present using Avogadro's number. Similarly, if we know the number of atoms or molecules present, we can calculate the mass of the substance using the molar mass.

Avogadro's number is named after Italian scientist Amedeo Avogadro, who first proposed the concept of molecules in 1811. It is a fundamental constant in chemistry and is used in many calculations, including those related to stoichiometry, gas laws, and solutions.

Learn more about Avogadro's number here: https://brainly.com/question/30340398

#SPJ11

The amount by which a solution's vapor pressure, freezing point, and boiling point differ from those of the pure solvent depends on the concentration of solute particles in the solution. This is known as colligative properties.

Colligative properties are physical properties of solutions that depend only on the number of solute particles in the solution, regardless of the chemical identity of the solute particles. The colligative properties include vapor pressure lowering, freezing point depression, boiling point elevation, and osmotic pressure.

For example, in the case of vapor pressure lowering, the presence of solute particles in a solution decreases the number of solvent molecules at the surface of the solution, thereby reducing the vapor pressure of the solution compared to that of the pure solvent.

The amount of vapor pressure lowering is proportional to the concentration of solute particles in the solution, but is independent of the identity of the solute particles.

Similarly, the amount of freezing point depression and boiling point elevation is proportional to the concentration of solute particles in the solution. The colligative properties are important in various fields, such as in the determination of molar mass of unknown solutes or in the process of freeze-drying of food and pharmaceuticals.

For more question on vapor pressure click on

https://brainly.com/question/30459262

#SPJ11

Cobalt-60 is more likely to be used in external radiotherapy than in internal radiotherapy for the treatment of cancer.

Using a machine like a linear accelerator, external radiotherapy involves projecting high-energy radiation beams towards the tumor from outside the body. Cobalt-60 is one of the radiation sources that can be used to produce these beams.

The cobalt-60 source is housed in a device called a teletherapy unit that emits radiation beams in a precise and controlled manner. This allows the radiation to be aimed specifically at the tumor while minimizing exposure to nearby healthy tissues.

Learn more about Cobalt - 60:https://brainly.com/question/14253921

#SPJ1

Any reaction that releases 265 kcal of energy can be classified as exothermic, which means that it releases energy in the form of heat.

This release of energy is typically the result of an oxidation reaction, where a substance loses electrons and becomes oxidized, while another substance gains electrons and becomes reduced. The process of oxidation can be a major source of energy in biological systems, such as during cellular respiration, where glucose is oxidized to release energy that is used by cells to carry out various functions.

A reaction that releases 265 kcal of energy can be classified as an exothermic reaction. This is because exothermic reactions involve the release of energy, whereas endothermic reactions absorb energy. Oxidation and reduction are related to the transfer of electrons, and activation refers to the energy required for a reaction to proceed.

To know more about reduction click here

brainly.com/question/30281969

#SPJ11

Any reaction that releases 265 kcal of energy can be classified as an exothermic reaction. Exothermic reactions release energy in the form of heat, light or sound, while endothermic reactions absorb energy from the surroundings.

A reaction that releases 265 kcal of energy can be classified as an exothermic reaction. In an exothermic reaction, energy is released in the form of heat, resulting in a net decrease in the system's total energy.

Reduction and oxidation are chemical processes that involve the transfer of electrons between molecules, but they do not necessarily involve the release or absorption of energy. Activation energy is the energy required to start a chemical reaction, but it does not determine whether a reaction is exothermic or endothermic.

To know more about Exothermic reactions :

https://brainly.com/question/28546817

#SPJ11

A muonic atom is created when a muon, which has a mass of 105.7 MeV/c, combines with a proton. Muons and electrons are similar in nature, but muons are more massive than electrons.

Answers of the given questions are below :

(a) The radius of the first Bohr orbit of a muonic atom can be calculated using the formula for the Bohr radius:

r = ε₀h² / πmeμ

where ε₀ is the vacuum permittivity, h is Planck's constant, me is the mass of the electron, and μ is the reduced mass of the muonic atom.

Using the given mass of the muon and the mass of the proton, we can calculate the reduced mass:

μ = meMp / (me + Mp) = 186.6 MeV/c²

Substituting the values and solving for r, we get:

r = 0.00054 nm

(b) The magnitude of the lowest energy state can be calculated using the formula:

E = -μe⁴/8ε₀²h²n²

where e is the elementary charge and n is the principal quantum number.

For n=1, we get:

E = -207.2 eV

(c) The shortest wavelength in the Lyman series can be calculated using the formula:

1/λ = R∞(1/n₁² - 1/n₂²)

where R∞ is the Rydberg constant and n₁ and n₂ are the initial and final quantum numbers, respectively.

For the Lyman series, n₁=1 and n₂=2. Substituting the values and solving for λ, we get:

λ = 187.5 nm

To know more about the muonic atom refer here :

https://brainly.com/question/28529640#

#SPJ11

Coal emits the most carbon dioxide when burned. Coal is a fossil fuel that is commonly used in power plants to generate electricity.

When burned, coal releases carbon dioxide as well as other pollutants such as sulfur dioxide, nitrogen oxides, and particulate matter. These emissions contribute to air pollution and climate change.

In contrast, burning natural gas emits less carbon dioxide than coal. Natural gas is composed mainly of methane, which has a lower carbon content than coal. Oil also emits less carbon dioxide than coal but more than natural gas. Burning wood also releases carbon dioxide but is considered to be carbon-neutral because the carbon dioxide released is equal to the amount absorbed by the tree during its lifetime.

However, burning wood can still contribute to air pollution and is not a sustainable long-term energy source. Overall, coal is the most carbon-intensive fossil fuel and a major contributor to climate change. The transition to cleaner energy sources such as renewable energy and natural gas can help reduce carbon emissions and mitigate the impacts of climate change.

To learn more about, carbon dioxide

https://brainly.com/question/21256960

#SPJ11

The balanced chemical equation for the reaction of calcium chloride (CaCl₂) with a fatty acid (R-COOH) to form soap (R-COONa) and carbon dioxide (CO₂) is:

CaCl₂ + 2 R-COOH → R-COONa + CO₂ + 2 HCl

In this reaction, calcium chloride (CaCl₂) reacts with a fatty acid (R-COOH), which is the structure of a typical soap molecule, to form soap (R-COONa) and carbon dioxide (CO₂) as products. The balanced equation is obtained by ensuring that the number of atoms of each element is the same on both sides of the equation.

To balance the equation, the coefficients of the reactants and products are adjusted. In this case, two molecules of the fatty acid are required to react with one molecule of calcium chloride to form two molecules of soap, one molecule of carbon dioxide, and two molecules of hydrochloric acid (HCl) as a byproduct.

The balanced equation represents a stoichiometric ratio between the reactants and products in the chemical reaction.

To know more about calcium chloride refer here:

https://brainly.com/question/28944725#

#SPJ11

(a) The pressure inside the bubble as a function of the bubble size can be calculated using the Laplace-Young equation,

which relates the pressure difference across the bubble wall to the curvature of the bubble. As the bubble size decreases, the pressure inside the bubble increases.

(b) The number of molecules inside the bubble depends on the size of the bubble and the concentration of carbon dioxide in the liquid. However, we can estimate the number of molecules using the ideal gas law, which relates the number of molecules to the pressure, volume, and temperature.

(c) The equations derived in parts (a) and (b) still apply for small bubbles, but for very large bubbles, the pressure inside the bubble may approach atmospheric pressure, and the number of molecules inside the bubble may become difficult to estimate accurately.

To know more about concentrations click here

brainly.com/question/29072206

#SPJ11

The lakes having characteristics of being clean, high in DO, deep and receiving few nutrients are typically classified as "oligotrophic" lakes.

The lakes having characteristics of being clean, high in DO, deep and receiving few nutrients are typically classified as "oligotrophic" lakes. Oligotrophic lakes are generally low in nutrients and productivity, resulting in clear water, high oxygen levels, and limited biological productivity.

These  lakes are often deep and have a low rate of nutrient input, usually from sources such as rainfall or groundwater. The opposite of oligotrophic lakes is eutrophic lakes, which are high in nutrients and productivity, resulting in murky water, low oxygen levels, and high biological productivity.

Visit to know more about Oligotrophic:-

brainly.com/question/5552139

#SPJ11

If the concentration of B is doubled while that of A is unchanged, the reaction rate will increase by eight times. option (d) is correct

The speed at which a chemical reaction occurs to yield products is called the rate of reaction. The rate of the reaction depends on the concentration and depicts the rate of the change of the reactants into products during the chemical changes.

The reaction is shown as,

A+ 2B → P

The rate of reaction is shown as,

rate =K [A][B]³

The concentration of A is constant and of B is doubled.

Let the concentration be,

Concentration of A = 1

Concentration of B = 2

So, the rate of reaction will be,

rate =K [A][B]³

rate= K [1] [2]³

rate= 8K

When the concentration of the B is doubled i.e the concentration of B = 4

Now the rate of reaction will be,

rate =K [A][B]³

rate= K [1] [4]³

rate= 64K

Comparing the rate of the reactions we get, the ratio of 8:1.

Therefore, the factor increases by 8 times.

Option (d) is correct

To know more about reaction rate here

https://brainly.com/question/14766971

#SPJ4

Answer:

The type of chemical bond found between the atoms in molecular oxygen (O2) is a covalent bond. Each oxygen atom has six valence electrons, and they share two electrons to each other to form a double bond between them, which stabilizes molecules with a total of 16 valence electrons.  

To solve this problem, we need to use the formula for calculating the Ka of a weak acid: Ka = [H+][A-]/[HA].

where [H+] is the concentration of hydrogen ions (protons), [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the acid. We are given the pH of the solution, which is 2.67. We know that pH = -log[H+], so we can find the concentration of hydrogen ions: [H+] = 10^(-pH) = 10^(-2.67) = 0.00200 M.

Since this is a weak acid, we can assume that most of the acid is in the form of HA, and only a small fraction has dissociated into H+ and A-. Therefore, we can assume that the concentration of HA is approximately equal to the initial concentration of the acid, which is 0.250 M.

Now we need to find the concentration of A-. To do this, we use the fact that the acid is weak, which means that its dissociation is described by the equilibrium: HA ⇌ H+ + A-, The equilibrium constant for this reaction is Ka. At equilibrium, the concentrations of the reactants and products are related by the expression: Ka = [H+][A-]/[HA].

We know the values of Ka and [H+] (from the pH), and we have already estimated the value of [HA]. Therefore, we can solve for [A-]: Ka = [H+][A-]/[HA], Ka = (0.00200)(x)/(0.250 - x), where x is the concentration of A- at equilibrium (which we don't know yet). Solving for x, we get: x = 0.0087 M, Now we can calculate the value of Ka: Ka = [H+][A-]/[HA]
Ka = (0.00200)(0.0087)/(0.250 - 0.0087), Ka = 7.2 x 10^-5, Therefore, the value of Ka for the weak acid is 7.2 x 10^-5.

To know more about hydrogen click here

brainly.com/question/30037191

#SPJ11

find the value of Ka for the weak acid. To calculate the Ka value of a weak acid with a 0.250 M concentration and a pH of 2.67:

Step 1: Calculate the hydrogen ion concentration [H+] using the pH value.
pH = -log[H+]
2.67 = -log[H+]
[H+] = 10^(-2.67)

Step 2: Determine the concentration of the weak acid and its conjugate base.
Initial concentration of the weak acid (HA) = 0.250 M
Initial concentration of its conjugate base (A-) = 0
Since the weak acid partially dissociates, let x be the change in concentration:
HA ⇌ H+ + A-
0.250 - x    x     x

Step 3: Write the expression for Ka.
Ka = ([H+][A-]) / [HA]

Step 4: Use the equilibrium concentrations in the Ka expression.
Ka = (x)(x) / (0.250 - x)

Step 5: Since x is very small compared to 0.250, you can simplify the expression.
Ka ≈ (x^2) / 0.250

Step 6: Substitute the [H+] value obtained in Step 1 for x.
Ka ≈ (10^(-2.67))^2 / 0.250

Step 7: Calculate the Ka value.
Ka ≈ 2.189 × 10^(-5)

The value of Ka for the weak acid is approximately 2.189 × 10^(-5).

To know more about pH value of a week acids:

https://brainly.com/question/3191232

#SPJ11

4000 g of neon will contain the same number of atoms as 1,000 g of bromine.

Hence, the correct option is E.

The mass of one Br atom is four times greater than the mass of one Ne atom. Therefore, the number of Ne atoms that would have the same mass as 1,000 g of Br is

(Number of Br atoms in 1,000 g Br) x (mass of one Br atom) / (mass of one Ne atom)

To find the number of Br atoms in 1,000 g Br, we divide 1,000 g Br by the molar mass of Br

1,000 g Br / 79.904 g/mol = 12.51 mol Br

One mole of any substance contains Avogadro's number (6.02 x 10^23) of particles (atoms, molecules, etc.).

Therefore, the number of Br atoms in 12.51 mol Br is

12.51 mol Br x (6.02 x 10^23 atoms/mol) = 7.53 x 10^24 Br atoms

Now we can calculate the mass of Ne that would contain the same number of atoms as 1,000 g Br

(Number of Br atoms in 1,000 g Br) x (mass of one Br atom) / (mass of one Ne atom)

= (7.53 x 10^24 atoms) x (79.904 g/mol) / (20.180 g/mol)

= 2.99 x 10^25 g Ne

Therefore, 4,000 g Ne (rounded to the nearest thousand) has same number of atoms as 1,000 g of bromine.

Hence the correct option is E.

To know more about neon here

https://brainly.com/question/20365054

#SPJ4

The current 0.65 A and time 20 min = 1200 seconds. We also need the atomic mass of silver Ag, which is 107.87 g/mol. Finally, we need to use Faraday's constant, which is 96,485 coulombs per mole of electrons. mass in grams = current in amperes x time in seconds x atomic mass in grams / Faraday's constant.

The mass of Ag plated out after electrolysis can be calculated using Faraday’s law of electrolysis which states that the mass of a substance produced at an electrode during electrolysis is directly proportional to the quantity of electricity passed through the cell and inversely proportional to the equivalent weight of the substance. The equivalent weight of Ag is 108 g/mol. mass = current × time × atomic weight / number of electrons × Faraday Constan where, current = 0.65 A time = 20 min = 1200 s atomic weight = 108 g/mol number of electrons = 1 since Ag+ ion gains one electron to form Ag Faraday constant = 96,485 C/mol mass = 0.65 A × 1200 s × 108 g/mol / 1 × 96485 C/mol mass ≈ 0.78 g Therefore, the mass of Ag plated out after 20 minutes is approximately 0.78 g.

learn more about electrons here.

https://brainly.com/question/6663044

#SPJ11

The term that is not a measure of water turbidity is: b. simple turbidity unit. The other terms (a. nephelometric turbidity unit, c. formazin turbidity unit, and d. jackson turbidity unit) are all valid measures of water turbidity.

A Simple Turbidity Unit, or STU for short, is an inexpensive device used to measure the amount of suspended solids in a liquid. It consists of a light source and a photocell. The photocell is placed in a container that is filled with the liquid to be measured. A light beam is then passed through the liquid and the photocell measures the amount of light that is scattered by the suspended particles. The more particles present, the more light is scattered and the higher the turbidity reading.

To learn more about turbidity click here https://brainly.com/question/26612834

#SPJ11

The statement that "Ozone can be formed by the action of sunlight on nitrogen oxides and hydrocarbons" is incomplete and misleading.False.

Ozone is not formed by the action of sunlight on nitrogen oxides and hydrocarbons alone, but rather by a complex photochemical reaction involving these substances as well as oxygen molecules.

This reaction, known as atmospheric photochemical smog, occurs in the presence of sunlight and leads to the formation of various pollutants, including ozone.

The nitrogen oxides and hydrocarbons act as precursors to the formation of other pollutants, which can then react with oxygen to form ozone.

For such more questions on Nitrogen oxides:

https://brainly.com/question/13629381

#SPJ11

If the primary concern for a structure is fire resistance, one should use B.

Answer - If the primary concern for a structure is fire resistance, one should use heavy timber framing. This type of framing is made up of large, solid wood members that can withstand high temperatures and remain stable in case of a fire. that have a slower burn rate and better fire resistance compared to other framing techniques.Post and beam framing, platform framing, and balloon framing do not offer the same level of fire resistance as heavy timber framing.

to know more about fire resistance, click on this -

brainly.com/question/11471571

#SPJ11

NaCl and KBr crystals that are used in cell holders in IR spectroscopy should be kept away from aqueous solutions because it will be evaporated while its spectrum is being obtained.

Generally Infrared Spectroscopy is defined as the analysis of infrared light interacting with a molecule. Basically, this spectroscopy can be observed in three ways by measuring absorption, emission and reflection. So, the main use of this technique is found in the organic and inorganic chemistry. IR spectroscopy is basically used by chemists to determine functional groups present in the molecules.

Basically, volatile liquid can't be prepared with this method, because volatile liquid gets evaporated while its spectrum is being obtained. For instance, if the liquid sample is toxic or smelly, we should not use this method. Therefore, NaCl and KBr are dissolved into water, and thus they can't be used for aqueous samples.

Learn more about IR spectroscopy from the link given below.

https://brainly.com/question/28523860

#SPJ4

Breath analyzers can not effectively measure non potable alcohols or organic vapors because they may have different chemical properties and concentrations which can result in inaccurate readings.

Breath analyzers are designed to measure the concentration of ethanol in a person's breath to estimate their blood alcohol content (BAC). Its work by detecting and analyzing the alcohol molecules in the breath sample provided by the user.

But most breath analyzers are not capable of accurately measuring non-potable alcohols or organic vapors because their sensors are specifically calibrated to detect ethanol.

Read more about breath analyzers

brainly.com/question/13339812

#SPJ1

The correct answer is c. Activated carbon is used to control tastes and odors in water. It works by adsorbing organic compounds that contribute to the unpleasant taste and odor.

Turbidity refers to the cloudiness or haziness of water and activated carbon does not have a direct impact on it. Additionally, activated carbon does not kill bacteria, but rather removes certain organic compounds that can provide a food source for bacteria to grow.

Finally, activated carbon does not keep chlorine in suspension, but rather removes it from the water if it is present.
Hi! Activated carbon is used to:
c. Control tastes and odors

To know more about Carbon click here .

brainly.com/question/14272000

#SPJ11