Answer:
75 watts
Explanation:
what will happen to the sugar when mixed to liquid?
Answer:
Heres the answer.
Explanation:
When you stir a spoonful of sugar into a glass of water, you are forming a solution. This type of liquid solution is composed of a solid solute, which is the sugar, and a liquid solvent, which is the water. As the sugar molecules spread evenly throughout the water, the sugar dissolves.
What is a segment of DNA that can code for?
Answer:
gene
Explanation:
DNA is divided into functional units called genes. A gene is a segment of DNA that codes for a functional product (mRNA, tRNA, or rRNA). Since the vast majority of genes are transcribed into mRNA and mRNA is subsequently translated into polypeptides or proteins, most genes code for protein synthesis
Answer:
coding for protein are called exons, and the noncoding regions separating the exons are called introns. Following transcription, these coding sequences must be joined together before the mRNAs can function. The process of removal of the introns and subsequent rejoining of the exons is called RNA splicing.
Explanation:
When comparing the proper position for spotting different exercises, you can conclude that, in spotting any exercise, it is important to __________. A. stand with your feet together B. keep your hand on the bar C. keep your back upright D. Place your hand inside the lifter's hands Please select the best answer from the choices provided. A B C D
Answer:
The answer is B
Explanation:
I took the test. PS... if your taking this test in college you should know it. I'm taking this test in middle school and got a 100%
Exercising is an essential part of the body's daily rouging and hence its necessary to keep the position of the body straight when standing and spotting the exercises.
The person should adopt the proper mechanism of exercising and a proper formal way of doing it. They should focus on posture when standing and sitting.Hence the option C is correct.
Learn more about the proper position for spotting different exercises,
brainly.com/question/1255990.
What is the current in a 160V circuit if the resistance is 5Ω?
Answer:
use v=IR
Explanation:
so, 160=I*5
I = 160/5
=32 ampere
The current = 32 A
Further explanationElectric current is a ratio between the voltage and the amount of resistance at the conductor.
Can be formulated
[tex]\large{\boxed{\bold{I=\frac{V}{R}}}[/tex]
V = Voltage (volts)
R = resistance (ohms)
This formula is also known as Ohm's Law, which states that
the amount of current flowing is directly proportional to the voltage and inversely proportional to the resistance.
V=160 V
R=5Ω
[tex]\tt I=\dfrac{160}{5}=32~A[/tex]
in rutherford's gold foil experiment a very small number of alpha particles were deflected. what about the structure of the atoms that could have caused this?
Answer:The atom being mostly empty space. A small number of alpha particles were deflected by large angles (> 4°) as they passed through the foil. There is a concentration of positive charge in the atom. Like charges repel, so the positive alpha particles were being repelled by positive charge
What is the predominant intermolecular force in the liquid state of each of these compounds: hydrogen fluoride (HF), carbon tetrabromide (CBr4), and nitrogen trifluoride (NF3)? Force(s): Dipole-dipole Hydrogen Bonding Dispersion
Answer:
HF - hydrogen bonding
CBr4 - Dispersion
NF3 - Dipole-dipole
Explanation:
Hydrogen bonding occurs when hydrogen is covalently bonded to a highly electronegative atom such as fluorine, chlorine nitrogen, oxygen etc. Hence the dominant intermolecular force in HF is hydrogen bonding.
CBr4 is nonpolar because the molecule is tetrahedral and the individual C-Br dipole moments cancel out leaving the molecule with a zero dipole moment hence the dominant intermolecular force are the dispersion forces.
NF3 has a resultant dipole moment hence the molecules are held together by dipole-dipole interaction.
The predominant intermolecular force in the liquid state of the compounds are as follows:
HF - hydrogen bondingHF - hydrogen bondingCBr4 - DispersionHF - hydrogen bondingCBr4 - DispersionNF3 - Dipole-dipoleDiscussion:
Hydrogen bonding is a bonding characterized covalent bonding of hydrogen to a highly electronegative atom such as fluorine, chlorine nitrogen, oxygen etc.In essence, the dominant intermolecular force in HF is hydrogen bonding.
Carbon tetrabromide, CBr4 is nonpolar because the molecule is tetrahedral and the individual C-Br dipole moments neutralise leaving the molecule with a zero dipole moment hence the dominant intermolecular force are the dispersion forces.Nitrogen trifluoride, NF3 has its molecules held together by dipole-dipole interaction as a result of its resultant dipole moment.Read more:
https://brainly.com/question/18099727
How many moles of sodium chloride are present in 0.5 L of 4 Molar NaCl(aq)
Select one:
O a. 2 moles
O b. 3 moles
c. 8 moles
d. 0.25 moles
Answer:
the answer is c.
Explanation:
The number of moles of sodium chloride present in 0.5 L of 4 Molar NaCl(aq) is 2 moles. The correct option is a.
What are moles?Moles are the quantity or amount of any substance. It is a measurement quantity.
The concentration of NaCl is 4 molar
The volume of the solution is 0.5 L is given.
To calculate the number of moles, we use the formula of molarity, in which moles are divided by the volume of the given solution. The formula is:
Molarity = moles/ volume
4 M = moles / 0.5 L
Putting the values in the given formula:
Moles = 4 x 0.5 L = 2 moles
Thus, the correct option is a. 2 moles is the number of moles of sodium chloride.
Learn more about moles, here:
https://brainly.com/question/26416088
#SPJ2
When solving by using the Quadratic Formula, what are the steps to follow? a. factor, find values for a,b,c, subtract c. substitute into the formula, find values for a,b,c, simplify b. simplify, find values for a,b,c, factor d. find values for a,b,c, substitute into the formula, simplify
Answer:
D!
Explanation:
When solving by using the Quadratic Formula, The steps to follow are to find values for a, b, c, substitute them into the formula, and simplify. The correct option is d.
What are Quadratic Formulas?A quadratic equation is a mathematical equation that shows the equation in an arranged form in which the unknown variables are x and known variables are a, b, and c. Where a is not equal to 0.
The standard quadratic equation
ax² + bx + c = 0
To solve the quadratic equation, first, find the variable value, and substitute the value of a, b, and c. Simplify it and ans solve it and then get the solution. There is another thing in the quadratic equation, which is factorization.
Thus, the correct option is d. find values for a, b, c, substitute them into the formula, and simplify.
To learn more about Quadratic Formulas, refer to the link:
https://brainly.com/question/11540485
#SPJ2
Which number completes the balanced chemical equation showing the process of rusting?
4Fe + 3O2 ---> ____Fe2O3
A. 1
B. 2
C. 4
D. 12
Answer:
B. 2
Explanation:
HAPPYYYY TURKEY BREAK
Answer:
2
Explanation:
Number the elements sodium, magnesium, phosphorus, and chlorine in the predicted order ionization energies from the highest to the smallest. sodium magnesium phosphorus chlorine
Answer:
It goes 4 3 2 1
Explanation:
Alphabetical order
Answer:
4- sodium, 3-magnesium, 2-phosphorus, 1-chlorine
Explanation:
edge!
if you perfom 30 joules of work lifting a 20-N box from the floor to a shelf how high is the shelf
Answer: 1.5 m
Explanation: E=mgh=Fh
30 J = 20 N * h
h = 30/20 = 1.5 m
Answer:
1.5 m
Explanation:
it just is its easy made A on test
Objects that conduct electricity can easily carry an electrical charge. Which of the following materials best conducts electricity?
A. copper wire
B. plastic tubing
C. rubber sheets
D. cotton string
Answer:
copper wire!
Explanation:
Each copper atom has lost one electron and become a positive ion. ... The electrons can move freely through the metal. For this reason, they are known as free electrons. They are also known as conduction electrons, because they help copper to be a good conductor of heat and electricity. Copper, Silver, Aluminum, Gold, Steel and Brass are common conductors of electricity. When properly installed, it is the safest and most efficient metal to produce electricity. Copper is commonly used as an effective conductor in household appliances and in electrical equipment in general. Because of its low cost, most wires are copper-plated. For a material to be a good conductor, the electricity passed through it must be able to move the electrons; the more free electrons in a metal, the greater its conductivity.
One method for separating polypeptides utilizes their different solubilities. The solubility of large polypeptides in water depends upon the relative polarity of their R groups, particularly the number of ionized groups. The more ionized groups there are, the more soluble the polypeptide. Which of each pair of the polypeptides that follow is more soluble at the indicated pH?
a. (Phe-Met)3 or (Glu)m at pH 7.0
b. (Lys-Ala)3 or(Gly)m at pH 7.0
c. (Ala-Ser-Gly)5 or (Asn-Ser-His)5 at pH 6.0
d. (Ala-Asp-Gly)5 or (Asn-Ser-His)5 at pH 3.0:
Answer:
The definition has been defined throughout the clarification segment below, as per the provided case.
Explanation:
Polypeptides were essential amino acids although therefore realize that those acids become charged individually, provide various R groups but have specific isoelectric positions as well.
The polypeptides could be divided by analysis of multiple isoelectric points including fulfilling the following, even though a protein always at the isoelectric point seems to have the end up losing money.
At pH 7, it would be very negatively (-) charged, although (Phe-Met)₃ is even less positive and therefore less reversible. This would be strongly positively (+) charge (equatorial) around pH 7, except for the amino as well as carboxyl-terminal, then (Gly)₂₀ which again is hourly rounding. Although the carboxylate categories of Asp compounds become partly protonated although neutral throughout (Ala-Asp-Gly)₅, around pH 3, although the imidazole categories of His compounds become completely protonated although covalently bonded throughout (Asn-Ser-His)₅.About pH 6.0, only certain polymers provide covalent bonds of polar Ser, however (Asn-Ser-His)₅ does have side bonds of polar Asn as well as partly protonated peptide bonds of His.A neutron has what kind of charge?
Answer:
Neutrons have no charge.
Explanation:
Remember it this way Neutral (neither of any side, in this case, + or +) and Neutron both have N. so Neutron is Neutral
1. What process occurs along transform fault plate boundary?
Answer:
hope it helps...
Explanation:
Along the third type of plate boundary, two plates move laterally and pass each other along giant fractures in Earth's crust. Transform faults are so named because they are linked to other types of plate boundaries. The majority of transform faults link the offset segments of oceanic ridges.
What do you notice when you get into a car that has been sitting in the sun for a while?
Why is the inside of the car so hot?
How would things be different if the car’s windows were left open?
Answer:
I notice that it's extremely hot after it has been sitting in thr sun for a while. The sun's rays have been directly shining on the car because the car was in the sun's Ray's directly. If the car's windows were to be left open, it would be less hot but still be hot if the rays of the sun were directly on the car.
Which description best characterizes the motion of particles in a solid?
a. slow but able to move past one another
b. fast and widely spaced
c.not moving
d.vibrating around fixed positions
Answer:
Explanation:
Slow but able to move past one another
An object with a mass of 20.0 kg has a force of 5.0 Newton's applied to it. What is the resulting acceleration of the object?
Answer:
1/4
Explanation:
force/mass
5/20=1/4 abs
The pictures show a rock changing over time.
What process best describes what is happening to this rock?
weathering by acid rain
weathering by plant roots
weathering by water and ice
weathering by wind
Answer:
can you show the picture
Consider the reaction below. Which species is(are) the Brønsted-Lowry acid(s)?
HF (aq) + NHâ (aq) â NHâ⺠(aq) + Fâ» (aq) g
Answer:
HF is the acid
Explanation:
The Brønsted-Lowry theory defines the acids and bases in chemistry as follows:
An acid is the species that can donate a proton
A base can accept protons.
In the reaction:
HF(aq) + NH₃(aq) → NH₄⁺(aq) + F⁻(aq)
As you can see, HF can donate its proton to produce F⁻: HF is the acid
In the same way, NH₃ is accepting a proton, NH₃ is the base.
A chemistry student named Igor was performing a titration experiment. He used 500mL of 6M sulfuric acid, H2SO4(aq) to completely neutralize a 2.00 L solution of unknown concentration sodium hydrodixe, NaOH(aq). What is the concentration of the NaOH(aq) in molarity (M)?
Answer:
3 M
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
H2SO4 + 2NaOH —> Na2SO4 + 2H2O
From the balanced equation above, the following data were obtained:
Mole ratio of the acid, H2SO4 (nA) = 1
Mole ratio of the base, NaOH (nB) = 2
Next, the data obtained from the question. This include the following:
Volume of acid, H2SO4 (Va) = 500 mL
Molarity of acid, H2SO4 (Ma) = 6 M
Volume of base, NaOH (Vb) = 2 L
Molarity of base, NaOH (Mb) =?
Next, we shall convert 2 L to millilitres (mL). This can be obtained as follow:
1 L = 1000 mL
Therefore,
2 L = 2 L × 1000 mL /1 L
2 L = 2000 mL
Thus, 2 L is equivalent to 2000 mL.
Finally, we shall determine the molarity of the base, NaOH. This can be obtained as follow:
Volume of acid, H2SO4 (Va) = 500 mL
Molarity of acid, H2SO4 (Ma) = 6 M
Volume of base, NaOH (Vb) = 2000 mL
Mole ratio of the acid, H2SO4 (nA) = 1
Mole ratio of the base, NaOH (nB) = 2
Molarity of base, NaOH (Mb) =?
MaVa / M Vb = nA/nB
6 × 500 / Mb × 2000 = 1/2
3000 / Mb × 2000 = 1/2
Cross multiply
Mb × 2000 × 1 = 3000 × 2
Mb × 2000 = 6000
Divide both side by 2000
Mb = 6000 /2000
Mb = 3 M
Thus, the molarity of the base, NaOH is 3 M.
which issue is a limitation of using synthetic polymers
Answer: As trash, Synthetic Polymers are not biodegradable. Landfills can easily fill up with synthetic polymers. Plastics can be made into different products. Recycling synthetic polymers is costly.
Explanation: Hope this helps in any way possible!
The main issues of using synthetic polymers include toxicity poor biocompatibility etc. Synthetic polymers stay non-degradable for ling time and make the surface polluted.
What are synthetic polymers?Natural polymers are naturally made substances such as cellulose, starch, glycogen etc. Polymers made by man are called synthetic polymers. Synthetic polymers are diverse and are made through several polymerization techniques.
PVC, polyethylene, polyesters Teflon etc. are very common polymers in daily life. A major class of synthetic polymers include plastics which are major pollutants nowadays.
Most of the synthetic polymers are non-biodegradable and will cause landfill issues. Some them are toxic in nature and might cause several health issues. Blending them with biodegradable polymers is a solution for this.
Find more on synthetic polymers:
https://brainly.com/question/4047007
#SPJ2
A box has dimensions: l = 10.0 cm; w = 5.0 cm; h = 2.5 cm determined by a mm ruler. Calculate
the volume of the box ± its absolute uncertainty.
Answer:
Volume of box = 125 cm³
Explanation:
Given:
Length l = 10 cm
Width b = 5 cm
Height h = 2.5 cm
Find:
Volume of box
Computation:
Volume of box = lbh
Volume of box = 10 x 5 x 2.5
Volume of box = 125 cm³
Round each number to two significant figures. 0.002353
Answer:
0.0024
Explanation:
you dont count the zeros as significant factors then round up 3 to 4 because you always round up if its 5 dont worry about the other numbers you dont need them hope it helped
What is the relationship between atomic size and bond length for H2O / H2S and CO2 / CS2?
5. A sample of methane has a volume of 225 mL at 0.650 atm of pressure. What will the new volume be if the
pressure is increased to 1.25 atm?
Answer:
not sure
Explanation:
Choose the formula for hydroxide.
OH
HPO4
Ca(OH)2
d Ba(OH)2
Answer:
OH
Explanation:
Hydroxide is a diatomic anion with chemical formula OH⁻.
What is the frequency of a photon that has a wavelength of 754 um?
Answer:
0.39760273
Explanation:
I typed into calculator hope it's right.
A biology experiment requires the preparation of a water bath at 37.08C (body temperature). The temperature of the cold tap water is 22.08C, and the temperature of the hot tap water is 55.08C. If a student starts with 90.0 g cold water, what mass of hot water must be added to reach 37.08C
Answer:
75 g
Explanation:
[tex]m_1[/tex] = Initial mass of water = 90 g
c = Specific heat of water
[tex]\Delta T_1[/tex] = Initial temperature difference = [tex](37.08-22.08)^{\circ}\text{C}[/tex]
[tex]m_1[/tex] = Mass of water to be added
[tex]\Delta T_2[/tex] = Final temperature difference = [tex](37.08-55.08)^{\circ}\text{C}[/tex]
Since, heat energy in the system is conserved we know
[tex]m_1c\Delta T_1+m_2c\Delta T_2=0\\\Rightarrow m_1c\Delta T_1=-m_2c\Delta T_2\\\Rightarrow m_2=-\dfrac{m_1\Delta T_1}{\Delta T_2}\\\Rightarrow m_2=-\dfrac{90(37.08-22.08)}{37.08-55.08}\\\Rightarrow m_2=75\ \text{g}[/tex]
The mass of water to be added to reach the desired temperature is 75 g.
Which of these is most likely observed during winter weather?
Cumulonimbus clouds
Explosive sounds
Freezing rain
Water spouts
Please Help!
Answer:
FREEZING RAIN
Explanation:
Answer:
C. freezing rain hope it helps :)
Explanation: