If you are in a car that is traveling at 60 mph and a balanced force is applied to the car what will happen to the motion of the car? /gen

Answers

Answer 1

Answer:

The car will stop moving

Explanation:

If a balanced force is applied to the car in motion, the car will stop accelerating and remain stationary because all the forces acting on the car are equal.

Also, you can say, since a balanced force is applied, the net force or resultant force on the car is zero. According to Newton's second law of motion, an object will move in the direction of the applied force. When the resultant force on the object is zero, it means the object will not move.


Related Questions

You are riding on a carousel that is rotating at a constant 24 rpm. It has an inside radius of 4 ftand outside radius of 12 ft. You begin to run from the inside to the outside along a radius. Your peak velocity with respect to the carousel is 6 mph and occurs at a radius of 8 ft.What are your maximum Coriolis acceleration magnitude and its directionwith respect to the carousel

Answers

Answer:

magnitude of the Coriolis acceleration is 44.235 ft/s² and the direction of the acceleration is along the axis of transmission

Explanation:

Given the data in the question;

Speed of carousel N = 24 rpm

From the diagram below, selected path direction defines the Axis of slip.

Hence, The Coriolis is acting along the axis of transmission

Now, we determine the angular speed ω of the carousel.

ω = 2πN / 60

we substitute in the value of N

ω = (2π × 24) / 60

ω = 2.5133 rad/s

Next, we convert the given velocity from mph to ft/s

we know that; 1 mph = 1.4667 ft/s

so

[tex]V_{slip[/tex] = 6 mph = ( 6 × 1.4667 ) = 8.8002 ft/s

Now, we determine the magnitude of the Coriolis acceleration

[tex]a_c[/tex] = 2( [tex]V_{slip[/tex] × ω )

we substitute

[tex]a_c[/tex] = 2( 8.8002 ft/s × 2.5133 rad/s )

[tex]a_c[/tex] = 44.235 ft/s²

Hence, magnitude of the Coriolis acceleration is 44.235 ft/s² and the direction of the acceleration is along the axis of transmission

You and your friends are pushing a car with a total of 1080 N of force. You are able to push the car for a distance of 218 m. Calculate the work done on the car.

Answers

Answer:

How much power is required to pull a sled if you use 60J of work in 5 seconds? ... Misfortune occurs and Renatta and her friends find themselves getting a workout. They apply a cumulative force of 1080 N to push their car 218 m to the ... Calculate the amount of work done when moving a 567N crate a distance of 20 meters.

Explanation:

Misfortune occurs and Renatta and her friends find themselves getting a ... They apply a cumulative force of 1080 N to push the car 218 m to the nearest fuel ... Write down what they give you. ... Determine the work done by Lamar in deadlifting 300 kg to a height of 0.90 m ... Work = Force x Distance = Joules (force = weight).

Can someone please help me on this?

Answers

Don’t listen to the link the other person sent!!!

Which category best describes this group of shapes? rhombuses rectangles parallelograms squares II​

Answers

they're parallelograms

Urgent!!!!! A student heated 235 g of water in a beaker until the water reached 100°C. The student removed the beaker from the heat and placed the beaker on a counter in a 23°C room. The student recorded the temperature of the water every 4 minutes for 20 minutes. The data are shown in the table. Estimate the average temperature of the air in the room at 20 min. explain your answer.

Answers

It’s says that the temperature in the room is 23C so the air temperature in the air would be 23C

The average temperature of the air in the room at 20 min is 23°C.

What is temperature?

Temperature is the degree of hotness or coldness of the object.

A student heated 235 g of water in a beaker until the water reached 100°C. The student removed the beaker from the heat and placed the beaker on a counter in a 23°C room. The student recorded the temperature of the water every 4 minutes for 20 minutes.

The surrounding is vast, its temperature does not get affected by small amount of water. So, the temperature of air remains constant.

Thus, the average temperature of the air in the room at 20 min is 23°C.

Learn more about temperature.

https://brainly.com/question/11464844

#SPJ2

What is the flux through the plane taken parnllel to the field?​

Answers

Answer:

the flux through the plane is zero.

Explanation:

give 3 example of right quantities that have no unit​

Answers

Answer:

velocity ratio

mechanical advantage

Relative density

Consider a coaxial cable (like the kind that is used to carry a signal to your TV). In this cable, a current I runs in one direction along the inner central wire, and the same current I runs in the opposite direction in the hollow conductor. How does the magnetic field B outside the entire cable (outside both the inner wire as well as the hollow conductor) vary as a function of distance away from the cable

Answers

Answer:

0 < r < r_exterior     B_total = [tex]\frac{\mu_o I}{2\pi r}[/tex]

r > r_exterior            B_total = 0

Explanation:

The magnetic field created by the wire can be found using Ampere's law

        ∫ B. ds = μ₀ I

bold indicates vectors and the current is inside the selected path

           

outside the inner cable

          B₁ (2π r) = μ₀ I

          B₁ = [tex]\frac{\mu_o I}{2\pi r}[/tex]

the direction of this field is found by placing the thumb in the direction of the current and the other fingers closed the direction of the magnetic field which is circular in this case.

For the outer shell

for the case   r> r_exterior

         

           B₂ = \frac{\mu_o I}{2\pi  r}

This current is in the opposite direction to the current in wire 1, so the magnetic field has a rotation in the opposite direction

for the case r <r_exterior

in this case all the current is outside the point of interest, consequently not as there is no internal current, the field produced is zero

           B₂ = 0

Now we can find the field created by each part

0 < r < r_exterior

          B_total = B₁

          B_total = [tex]\frac{\mu_o I}{2\pi r}[/tex]  

r > r_exterior

          B_total = B₁ -B₂

          B_total = 0

A negative charge of 2 C and a positive charge of 3 C are separated by 80 m. What is the force between the two charges?

Answers

Answer:

6

Explanation: i looked this up.

According to the Coloumb's law, the force is obtained from the charges and the distance between them is 8.4375×10⁶ N. This force results in the attractive force.

What is Coloumb's law?

Coloumb's law states the relation between the charges and the distance between the charges. Coloumb's law states that the Force is directly proportional to the product of charges and inversely proprotional to the square of distance between them.

The Coloumb's law gives the force of attraction or repulsion between the charged bodies. Two charges with positive or negative charges repels each other. One positive and one negative charge attract each other.

The force increases with the product of charges increases as product of charges and force are directly proprotional. The force decreases with the increase in distance of seperation and vice-versa. The SI unit of force is newton (N).

The Coloumb's law is:

          F = k (q₁×q₂ / r²)

k is the constant of proportionality and is equal to 9×10⁹ N.m²/C².

q₁, q₂ = charges

r² =  distance of seperation of charges.

From the given,

q₁ = -2C ( negative sign represents the negative charge)

q₂ = +3C ( + sign represents the positive charge)

r² = 80 m ( distance between the charges)

F = k (q₁×q₂ / r²)

  = 9×10⁹×2×3 / 80×80

 = 54×10⁹ / 6400

 = 8437500 N

F = 8.4375×10⁶ N

There is the presesnce of both positive and negative charges, hence it results in the attractive force. Hence, the force F between two charges separated by 80m is  8.4375×10⁶ N.

To learn more about the Coloumb's law:

https://brainly.com/question/14519256

#SPJ2

Average running speed is 8km/h. Convert this to m/s :
a)8m/s
b)2.2m/s
c)28.8m/s
d)8km/h

Answers

Answer:

Im not sure if you mean miles per hour or meters per hour but if it is miles it is 4.97 miles per hour and if it is meters then it is 8000 meters per hour

Explanation:

Sorry if I'm wrong

The universe cooled after the Big Bang.At some point hydrogen atoms combined to form helium.What is this process called?

Answers

Answer:

Nuclear fusion

Explanation:

8. What is the mass and charge of a proton?
A. 1 amu, no charge
B. 1 amu, charge of +1
C. Mass of O, charge of -1
D. None of the above

Answers


B.

Step By Step Explanation:

Two risks of exposure to High levels of UV radiation

Answers

Answer:

uv radiation cause cancer

uv radiation effect our eyes

Answer:

you can get

1:skin cancer

2:eye damage

3:skin damage

4:immune system suppression

choose which two u want

hope this helped

:)

Explanation:

A circuit is built based on this circuit diagram.
What is the equivalent resistance of the circuit?
0.61 Ω
Ο 1.6 Ω
7.5Ω
Ο 18 Ω
12V
3.0 Ω.
6.0 Ω
9.Ο Ω.
Will mark brainlyest. No “links” I don’t want them

Answers

[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]

Actually Welcome to the concept of resistors,

The equivalent circuit is given as,

1/Rp = 1/3 + 1/6 + 1/9

1/Rp = 6+3+2/18

1/Rp = 11/18

Rp = 18/11 ==> 1.63 ==> 1.6 ohms

hence the equivalent resistance of the circuit is 1.6 ohms

The equivalent resistance of the circuit is 1.6Ω. The correct option is B.

What is Ohm’s law?

Ohm’s law state that ” At constant temperature, the current (I) flowing through a conductor is directly proportional to the potential difference(V) across the two endpoints of the given conductor.”

I.e V ∝ I

V=IR

Where V= potential difference across the conductor.

I = current flowing through the conductor.

R= constant pf proportionality i.e resistance which unit is ohm(Ω).

There are two ways we can connect the resistors.

(i) series connection

If a number of resistors are said to be connected in series When the same current (I) flows through them.

Let R1, R2, and R3 be the resistors connected in series.

Then the R equivalent is

Req=R1+R2+R3

(ii) parallel connection

A number of resistors are said to be connected in parallel when the same potential difference(V) exists across each of them.

Let R1, R2, and R3 be the resistors connected in parallel.

Then the R equivalent is

1/Req=1/R1+1/R2+1/R3

In this question,

The three resistance connected in parallel by applying the above formula we get,

1/Req=1/R1+1/R2+1/R3

1/Req = 1/3 + 1/6 + 1/9      .................  (∵R1=3Ω,R2=6Ω AND R3=9Ω)

1/Req =11/18

Req=18/11

Req=1.6363Ω

Req≈1.6Ω

Therefore, The equivalent resistance of the circuit is 1.6Ω.

To learn more about resistance click:

https://brainly.com/question/29427458

#SPJ7

how do stocks and bonds differ

Answers

Answer:

Explanation:

Stocks give you partial ownership in a corporation, while bonds are a loan from you to a company or government. The biggest difference between them is how they generate profit: stocks must appreciate in value and be sold later on the stock market, while most bonds pay fixed interest over time.

Answer:

Stocks give you partial ownership in a corporation, while bonds are a loan from you to a company or government. The biggest difference between them is how they generate profit: stocks must appreciate in value and be sold later on the stock market, while most bonds pay fixed interest over time.

Explanation:

None

7)
Which wave carries the most energy?
-)
A)

B)
C)
D)
Hover over answer image to enlarge

Answers

C.

Explanation:

C. is a gamma ray and they carry the most energy.

The most energy is carried by the gamma rays. The correct option is C.

What is a gamma ray?

Gamma radiation, also known as gamma rays, is a type of electromagnetic radiation produced by the radioactive decay of atomic nuclei. It is made up of electromagnetic waves with the shortest wavelengths, which are typically shorter than those of X-rays.

Waves with a higher frequency have more energy. Gamma rays have the shortest wavelengths and highest frequencies of any electromagnetic wave. Gamma rays have more energy than any other electromagnetic wave due to their extremely high frequencies.

To know more about gamma rays follow

https://brainly.com/question/22166705

#SPJ6

1.What is the Kinetic energy of a 3 kg object moving at 4 m/s?
Plz help I’ll give points

Answers

Answer:

24 J

Explanation:

[tex]K = \frac{1}{2} mv^{2} = \frac{1}{2} (3kg)(4m/s)^{2} = 24 J[/tex]

A marble and a basketball are rolling toward you at the same velocity. If the same amount of force is used to stop both objects, what is true about the amount of time needed to stop those objects?

Answers

Answer:

The amount of time needed to stop the marble is much less than the amount of time needed to stop the basketball.

Explanation:

To explain this question we can use the equation:

Change in momentum = Force x Time

Where momentum = mass x Velocity

In the case of the basketball, it has a much larger mass than the marble, meaning it has much more momentum than the marble. This means that with the same amount of force, it will need much more time to stop.

Likewise, the marble has less mass than the basketball meaning it will have less momentum. This means that with the same amount of force, it will require less time to stop.

Logically this also makes sense if we think about it in a real life scenario. If we try to stop a marble with our finger, we can stop it much faster then if we try to stop a basketball with our finger because of the difference in mass between the two objects, therefore the marble will require much less time to be stopped than the basketball.

Hope this helped!

the pygmy shrew has an average mass of 2.0 g if 49 of these shrew are placed on a spring scale with a spring constant of 24 N/m , what is the springs displacement

Answers

Answer:

Spring's displacement, x = -0.04 meters.

Explanation:

Let the spring's displacement be x.

Given the following data;

Mass of each shrew, m = 2.0 g to kilograms = 2/1000 = 0.002 kg

Number of shrews, n = 49

Spring constant, k = 24 N/m

We know that acceleration due to gravity, g is equal to 9.8 m/s².

To find the spring's displacement;

At equilibrium position:

Fnet = Felastic + Fg = 0

But, Felastic = -kx

Total mass, Mt = nm

Fg = -Mt = -nmg

-kx -nmg = 0

Rearranging, we have;

kx = -nmg

Making x the subject of formula, we have;

[tex] x = \frac {-nmg}{k} [/tex]

Substituting into the formula, we have;

[tex] x = \frac {-49*0.002*9.8}{24} [/tex]

[tex] x = \frac {-0.9604}{24} [/tex]

x = -0.04 m

Therefore, the spring's displacement is -0.04 meters.

Transverse thrusters are used to make large ships fully maneuverable at low speeds without tugboat assistance. A transverse thruster consists of a propeller mounted in a duct; the unit is then mounted below the waterline in the bow or stern of the ship. The duct runs completely across the ship. Calculate the thrust developed by a 1900 kW unit supplied to the propeller if the duct is 2.6 m in diameter and the ship is stationary.

Answers

Answer:

Thrust developed = 212.3373 kN

Explanation:

Assuming the ship is stationary

Determine the Thrust developed

power supplied to the propeller ( Punit ) = 1900 KW

Duct distance ( diameter ; D  ) = 2.6 m

first step : calculate the area of the duct

A = π/4 * D^2

   =  π/4 * ( 2.6)^2  = 5.3092 m^2

next : calculate the velocity of propeller

Punit = (A*v*β ) / 2  * V^2     ( assuming β = 999 kg/m^3 ) also given V1 = 0

∴V^3 = Punit * 2 / A*β

         = ( 1900 * 10^3 * 2 ) / ( 5.3092 * 999 )

hence V2 = 8.9480 m/s

Finally determine the thrust developed

F = Punit / V2

  = (1900 * 10^3) / ( 8.9480)

  = 212.3373 kN

If you were on a spaceship traveling at 0.50c away from a star, what speed
would the starlight pass you?

Answers

Explanation:

The speed of light in vacuum is the same by all observers (2nd Principle). You would find that the starlight passes you at c. This is more than a thousand times faster than existing space craft.

According to all observers, the velocity of light in a vacuum will be the same (2nd Principle). You'd discover that the starlight is passing you at c. Compared to current spacecraft, this really is a thousand times faster.

What is Speed?

The amount of the shift in approach per unit of time or the size of the displacement over time for an object can be used to describe speed, which would be a scalar quantity in everyday language and kinematics.

The maximum speed that can be maintained when a time period grows closer to zero is the starting speed.

By dividing the object's distance traveled by the duration of the interval, the mean pace of the object for the given period of time is calculated. Speed and velocity are not always the same thing.

To know more about Speed:

https://brainly.com/question/28224010

#SPJ2

A bucket of water of mass 14.6 kg is suspended by a rope wrapped around a windlass, that is a solid cylinder with diameter 0.320 m with mass 11.1 kg . The cylinder pivots on a frictionless axle through its center. The bucket is released from rest at the top of a well and falls a distance 11.0 m to the water. You can ignore the weight of the rope.

Required:
a. What is the tension in the rope while the bucket is falling?
b. What is the time of fall?
c. While the bucket is falling, what is the force exerted on the cylinder by the axle?

Answers

Answer:

a. T = 39.41 N

b. t = 1.76s

c. 150.78 N

Explanation:

Given:

Mass of bucket of water, Mb = 14.6 kg

Mass of cylinder, Mc = 11.1 kg

Diameter of cylinder, D =  0.320 m, or radius, r = D/2 = 0.16m

Displacement of the bucket from the top, that is the vertical displacement , y = 11.0 m

a. The tension in the rope while the bucket is falling is:

F = mg - T = ma

Where F= The force

m= mass

g= Acceleration due to gravity

T = tension in the rope

a = acceleration

T= m(g - a)

Then, calculating the angular acceleration of the pulley system in relation to its radial acceleration

T= 1/2Ma

Merging the two final equation so as to solve for a

M(g - a) = 1/2Ma

Make a the subject of the formula

Mg - Ma = 1/2Ma

1/2Ma + Ma = Mg

a (1/2 M + M) = Mg

Divide both side by (1/2 M + M)

a = Mg ÷ (1/2 M + M)

Inputing the given value in the formula above

g= 9.8m/s2

a = (14.6 kg) (9.8m/s2) ÷ 1/2 (11.1 kg) + 14.6 kg

a = 7.1007m/s2

Now it is easy to input the value into T= 1/2Ma

T = 1/2 (11.1 kg) (7.1007m/s2) = 39.41 N

B. Time of fall is:

Using one of the equation of motion

s = ut + 1/2 at^2

U = Initial velocity

t = time

a = acceleration

s= distance in this case displacement y

making t the subject of the formula

t = √(2s ÷ a)

u is 0 since the bucket starts from rest

so, t = √((2)(11.0 m) ÷ 7.1007m/s2)

t = 1.76s

c.  the force exerted on the cylinder by the axle = T + Mg

  = 42 N + (11.1 kg) (9.8m/s2)

= 150.78 N

Which electromagnetic wave has the shortest wavelength?



Which electromagnetic wave would have a wavelength approximately the size of the tip of a pencil?



Which electromagnetic wave has the longest wavelength?

Answers

Answer:

shortest - gamma Ray's

size of a pencil tip : most likely microwaves

longest - radio waves

Gamma rays have the shortest wavelength whereas Radio waves have the longest wavelength. The wave whose wavelength is about the size of the tip of a pencil is infrared ray.

What is an Electromagnetic spectrum?

The whole electromagnetic waves are divided into several classes based on their frequencies or energies as follows, in the order of increasing frequency:

Radio waves

Microwaves

Infrared

Visible

Ultraviolet

X-rays

Gamma rays

The Gamma rays are the shortest wavelength group with frequencies greater than 3 × 10²⁰ Hz.

The Radio waves are the longest wavelength group. Their frequency is lower than 3 × 10⁷ Hz.

The tip of a pencil is about 0.5mm in width.

Calculate the frequency of the wave whose wavelength is about the size of the tip of a pencil i.e. λ = 0.5 mm,

ν = 3×10⁸/(0.5×10⁻³) = 6×10¹¹ Hz.

The infrared rays have frequencies in the range of 3×10¹¹ Hz to 3×10¹³ Hz. So, the wave is infrared.

Infrared waves have a wavelength about the tip of a pencil.

Learn more about the electromagnetic spectrum here

https://brainly.com/question/23423065

#SPJ2

An object is pushed with a force of 400 N for 20 meters; what is the work done on the object? Solve using W=F*d

Answers

Answer:

800joules

Explanation:

work is measured in joules

A particle oscillates in simple harmonic motion, with amplitude A and period T. The particle starts from position x = A. What is the magnitude of the particle's displacement a time 3T/2?

A. 3A
B. 6A
C. 2A
D. 0

Answers

Answer:

i guess it is D because,

y = A sin(wt)

w = [tex]\frac{2\pi }{T}[/tex] and t = 3T/ 2

now, Y = A sin ( [tex]\frac{2\pi }{T} X \frac{3T}{2}[/tex])

so, Y = 0radian

Explanation:

The magnitude of the particle's displacement a time 3T/2 is zero. The correct option is D.

What is magnitude?

Magnitude is simply "distance or quantity" in the context of physics.

A = amplitude of SHM

T = time period of SHM

At t = 0 s, the position of a particle is, x = A

At t = 3T/2, find the magnitude of the particle's displacement

d = magnitude of displacement of particle at time

t = 3T/2

t = ?

t= t1 + t2 = T + T/2

where

t1 = T

t2 = T/2

Now, in time t1 = T, the particle will return to its initial position as the particle completes one full cycle of motion in time T.

Therefore, after time t1 = T, the position of the particle is given by x = A, and the total displacement by the particle is 0.

Now in time

t2=T/2

The particle will go to another extreme position, given by x = -A.

Therefore, the net displacement of particles in time

3/T2

is given by:

d=0+(−A)=−A

d=−A

Therefore, the correct option is D. 0.

To learn more about the magnitude, refer to the link:

https://brainly.com/question/14452091

#SPJ2

1. A train is moving north at 5 m/s on a straight track. The engine is causing it to accelerate northward at 2 m/s^2.
How far will it go before it is moving at 20 m/s?
A) 83
B) 43
C) 39
D) 94
E) 20

Answers

Answer:

(D) x = 93.8 m

Explanation:

v^2 = v0^2 + 2ax

(20 m/s)^2 = (5 m/s)^2 + 2(2 m/s^2)x

Solving for x,

x = 93.8 m

can someone please help me answer this!!

Answers

i may be wrong, but i believe it is C, as there is no mention of sunlight being a control variable. the amount of sunlight greatly determines plant growth since they obviously use it for photosynthesis

The first extra-solar planet around a main sequence star (i.e., not a neutron star or white dwarf) was found around the star 51 Pegasi in 1995. The large planet causes a measureable motion of the star around the center of mass of the system. Pegasi 51's orbital motion had a period of 4 days indicating a very large planet very close to the star. A large planet of mass M around a small star of mass 4M. The distance between planet and star is L. Both the planet and star will orbit around the center of mass of the system (marked by the red X).

Required:
Where is the center of mass of the star-planet system?

Answers

Answer:

   [tex]r_{cm}[/tex]= 1/5 L

Explanation:

To find the center of mass of the system let's use

        [tex]r_{cm} = \frac{1}{M}[/tex] ∑ r_i x_i

where m is the total mass of the system

let's apply this expression to our case

       

Let's set the reference frame on the star

         [tex]r_{cm} = \frac{1}{M +4M} ( 4M 0 + M L)[/tex]

         r_{cm} = [tex]\frac{1}{5}[/tex] L

         [tex]r_{cm}[/tex]= 1/5 L

Hey, the breast center is 1/5 of the distance between the star and the planet.

This is energy of motion
Hint
First two letters Ki

Answers

Answer: Kinetic Energy

Explanation:Kinetic energy is the energy of motion. All moving objects have kinetic energy.

Answer:

Kinetic energy

Explanation:

Kinetic energy is energy produced when the object is in motion.

A ball bounces changing velocity from vi=15m/s[D] to vf=15m/s[U] in t=0.01s. The balls acceleration is *
A) 0
B) 30m/s/s
C) 3000m/s/s
D) 0.3m/s/s

Answers

Answer:

Option (A) is correct

Explanation:

a= (vf-vi)/ t

put the values

hence,

a= ( 15-15)/0.01

a=0

Other Questions
What were people who moved to California during the gold rush How long will it take the population of a certain country to double if its annual growth rate is 7.3%? PLEASE HELP I NEED IT TO PASS THIS CLASS Let x2+8x=7 .What values make an equivalent number sentence after completing the square?Enter your answers in the boxes.x2+8x+ ? = ? I need the answer I dont know what it is so can anybody help. Does anyone know how to solve if you do plss help answer the question with work shown and an explanation of how you got your answer NO LINKS OR DOING IT JUST FOR THE POINTS Will give brainliest identify 2 properties of sound waves Explain how where a person lives might affect his or her mood. Pls help - will give brainliest PLEASE HELP 50 points Helppp the tutorsss arent workinggg In an aquarium 2/5 of the fish or surgeonfish. Of these, 3/4 are yellow tangs. what fraction of all fish in the aquarium or yellow tangs Identify which of these habits could result in credit issues.A. paying for large purchases in cashB. loaning money to a creditworthy personC. spending money within a personal budgetD. charging money on multiple credit cards and not making payments Heritage Images/Getty ImagTaken together, the two images best support which of the following claims regarding developments in the period from 1450 to 1750 ?AEuropean military technology was inferior to Asian military technology.BRulers served as military commanders and typically led armies into battle themselves,Gunpowder technology facilitated the expansion of land-based empires.DReligious divisions were not a significant source of military conflict. PLS GRAPH THE EQUATION!! If 4.04g of h2 gas react with oxygen gas to create 36.36g of water, how many grams of oxygen reacted? Cody is purchasing sports equiptment for $161.37. In Colorado, the sales tax is 2.9%. What is the total cost, including tax, on his purchase? Two angles are vertical angles. If one of the angles measures 35 and the other measures (4x+3), which algebraic equation can be used to solve for the value of x?35 + 4x + 3 = 18035 + 4x + 3 = 9035 = 4x + 3None of these are correct4x + 3 = 90 Write a program that randomly (using the random number generator) picks gift card winners from a list of customers (every customer has a numeric ID) who completed a survey. After the winning numbers are picked, customers can check if they are one of the gift card winners. In your main function, declare an integer array of size 10 to hold the winning customer IDs (10 winners are picked). Pass the array or other variables as needed to the functions you write. For each step below, decide what arguments need to be passed to the function. Then add a function prototype before the main function, a function call in the main function and the function definition after the main function. Based on the passage, which does the phrase "fill the bill" mean?