if water is accidentally added to a saturated aqueous solution the solution remains saturated. true false

To make a 0.6 mL of a 1 M solution of sodium borohydride, you will need to follow these steps:

Determine the amount of sodium borohydride required:

The formula weight of sodium borohydride is 37.83 g/mol. To make a 1 M solution, you need 1 mole of sodium borohydride per liter of solution. Since you are making only 0.6 mL of solution, you need to calculate how much of sodium borohydride is required.

1 M = 1 mol/L

Therefore, 1 mole of sodium borohydride is required to make a 1 M solution in 1 liter of solution.

To make 0.6 mL of a 1 M solution, you need to calculate the amount of sodium borohydride required as follows:

1 M = 1 mol/L = 37.83 g/L

0.6 mL = 0.0006 L

Therefore, the amount of sodium borohydride required is:

0.6 mL x 37.83 g/L = 0.022698 g

Dissolve sodium borohydride in a small amount of solvent:

Sodium borohydride is a highly reactive compound and can react violently with water. Therefore, it is recommended to dissolve it in a suitable solvent. One commonly used solvent is tetrahydrofuran (THF). Add the calculated amount of sodium borohydride to a small amount of THF and stir gently until it dissolves.

Dilute to the final volume:

Add THF to make up the final volume of 0.6 mL. Mix well.

Note: Always handle sodium borohydride with caution and use appropriate safety equipment as it is a strong reducing agent and can react violently with water or other incompatible materials.

Learn more about sodium borohydride here:

https://brainly.com/question/31321350

#SPJ11

Dipole-dipole forces and dispersion forces are the intermolecular forces present in HBr. Because bromine has a higher electronegativity than hydrogen, HBr is a polar molecule.

London dispersion forces (LDF), dipole-dipole interactions, and hydrogen bonds are the three different intermolecular forces. All substances at least have LDF, but molecules can have any combination of these three types of intermolecular interactions.

Water (H2O), hydrogen chloride (HCl), and hydrogen fluoride (HF) are all examples of dipole-dipole forces. Hydrogen chloride, or HCl Permanent dipole HCl. In contrast to the hydrogen atom, which has a partially positive charge, the chlorine atom has a partially negative charge.

To know more about bromine visit:-

https://brainly.com/question/29028678

#SPJ1

To determine the amount of heat absorbed when ice is heated from point A to B, we should use the following equation: q = mcΔT.

In  q = mcΔT,  q is heat absorbed, m is mass of the ice, c is specific heat capacity, ΔT is the temperature change. When heat absorbed gives positive sign and heat when emitted gives negative sign.

This equation takes into account the mass (m) of the ice, the specific heat capacity (c) of the ice, and the change in temperature (ΔT) from point A to B.

Learn more about ice : https://brainly.com/question/23557049

#SPJ11

We must apply the Nernst equation, which connects a battery's voltage to the concentration of the ions participating in the process, to answer this problem. The Nernst equation reads as follows: E = E° - (RT/nF)ln(Q)

Car battery voltage can vary from 12.6 to 14.4, as we can see when we check more closely. The car battery's voltage will be 12.6 volts when the engine is off and fully charged. As "resting voltage," this is understood.

Part A: The appropriate half-reactions are:  Mg → Mg2+ + 2e- (oxidation)

Cu₂₊ + 2e- → Cu (reduction)

The standard electrode potentials are: E°(Mg2+/Mg) = -2.37 V,

E°(Cu₂+/Cu) = +0.34 V

The reaction quotient at equilibrium is:

Q = [Mg₂₊]/[Cu₂₊] = (1.0×10⁻⁴)/(1.4) = 7.14×10⁻⁵

With these values entered into the Nernst equation, we obtain:

E = 0.34 - (8.31×298)/(2×96485)ln(7.14×10⁻⁵) - (-2.37)

E = 1.10 V

As a result, the battery's initial voltage is 1.10 V.

Part B: We must use the equation to get the battery's voltage after supplying 4.7 A for 8.0 hours.

E = E° - (RT/nF)ln(Q) - (IΔt/nF)

We must first determine how many moles of electrons were exchanged during the reaction:

n = 2 (from the balanced equation)

At the new concentration, the reaction quotient is:

Q' = ([Mg₂₊] - Δ[Mg₂₊])/([Cu₂₊] + Δ[Cu₂₊])

= (1.0×10⁻⁴ - 2nMg)/(1.4 + 2nCu)

= (1.0×10⁻⁴ - 2(4.7)(8×3600))/(1.4 + 2(4.7)(8×3600))

= 3.64×10⁻⁵

where Δ[Mg₂₊] = 2nMg and Δ[Cu₂₊] = -2nCu.

With these values entered into the Nernst equation, we obtain:

E = 0.34 - (8.31×298)/(2×96485)ln(3.64×10⁻⁵) - (-2.37) - (4.7×8×3600)/(2×96485)

E = 1.07 V

As a result, the battery's voltage is 1.07 V after providing 4.7 A for 8.0 hours.

Part C: When [Mg₂₊] = 0, the reaction will come to an end. We may use the following equation to determine how long it will take for this to occur:

Q = [Mg₂₊]

To know more about concentration visit:-

https://brainly.com/question/29276511

#SPJ1

The volume of an ideal gas at 6.97 atm and 493 K when 89.5 mol is present is 519.46 L.

The equation of state for a fictitious perfect gas is known as the ideal gas law, sometimes known as the generic gas equation. It is a good estimate of how many gases behave under various circumstances.

Using the ideal gas law equation, we can calculate the volume of the gas:

PV = nRT

where P = 6.97 atm, n = 89.5 mol, R = 0.082057 L⋅atm mol⋅K, and T = 493 K.

Substituting these values into the equation, we get:

V = (nRT) / P
V = (89.5 mol) x (0.082057 L⋅atmmol⋅K) x (493 K) / 6.97 atm
V = 519.46 L

Therefore, the volume of the gas is 519.46 L.

Learn more about ideal gas law: https://brainly.com/question/25290815

#SPJ11

Since the central atom has 10 electron in outermost outermost shell which disobeyed the octet rule.  octet rule -> disobeyed. and the diagram is attached below:

Atom is a free and open source text editor created by the development team at Github. It is a modern and customizable cross-platform text editor that supports syntax highlighting, auto-completion, code folding and more. Atom is designed to be extremely user-friendly and to provide an environment for both novice and expert users. Atom also has a package manager that allows users to easily find and install packages that extend the functionality of the editor. Additionally, Atom has a vibrant community of developers and users that are continuously creating and updating packages for the editor. Atom is an excellent choice for writing code and text, as it provides an efficient, intuitive, and customizable environment.

To learn more about atom
https://brainly.com/question/25674345
#SPJ1

The first equivalence point occurs at 27.2 mL of 0.1017 M KOH, and the second equivalence point occurs at 54.4 mL of 0.1017 M KOH.


1. Calculate the moles of H₂SO₃: 0.022 L * 0.113 mol/L = 0.002486 mol

2. Since H₂SO₃ has two acidic protons, the moles of KOH required for the first equivalence point is the same: 0.002486 mol

3. Calculate the volume of KOH needed for the first equivalence point: 0.002486 mol / 0.1017 mol/L = 0.0272 L or 27.2 mL

4. For the second equivalence point, we need double the moles of KOH: 2 * 0.002486 mol = 0.004972 mol

5. Calculate the volume of KOH needed for the second equivalence point: 0.004972 mol / 0.1017 mol/L = 0.0544 L or 54.4 mL

To know more about equivalence point click on below link:

https://brainly.com/question/31375551#

#SPJ11

The pH of the hydrofluoric acid is 3.4451.

What is pH?

A pH is a quantitative measure of the acidity or basicity of aqueous solutions. The pH scale has a range of 0 to 14. A pH of 7 is considered neutral. A pH of less than 7 indicates acidity. A pH greater than 7 indicates that the solution is basic.

What is Ka?

Ka or acid dissociation constant (Ka) measures how much an acid dissociates in solution and hence its strength.

Given,

Ka of hydrofuoric acid= 6.8 × 10⁻⁴

To find pKa,

pKa= -log₁₀Ka

      = -log 6.8×10⁻⁴

      = 4 - 0.8325

      = 3.1675

pH  = pKa + log (A⁻)/(HA)

      = 3.1675 + log (0.31×225)/(0.23×160)

      = 3.1675 + log 1.895

      = 3.1675 + 0.2776

      = 3.4451

Therefore, the pH of hydrofluoric acid is 3.4451.

To learn more about pH, click here:

https://brainly.com/question/2288405

#SPJ12

The solubility of Ag₃PO₄ (silver phosphate) in water is approximately 6.4 x 10⁻⁴ g/L.

To calculate the solubility of Ag₃PO₄ in water, we first need to understand its dissociation in water: Ag₃PO₄(s) ↔ 3Ag⁺(aq) + PO₄³⁻(aq). Let the solubility be represented by 's'. This means that for every mole of Ag₃PO₄ dissolved, 3 moles of Ag+ and 1 mole of PO₄³⁻ are formed.

The equilibrium constant for the reaction, Ksp, is given by the expression: Ksp = [Ag⁺]³[PO₄³⁻]. Since 3 moles of Ag+ are produced per mole of Ag₃PO₄, [Ag+] = 3s, and [PO₄³⁻] = s. So, Ksp = (3s)³(s).

The Ksp for Ag₃PO₄ is 2.8 x 10⁻¹⁸. Solving for 's' (solubility in mol/L), we get s ≈ 1.2 x 10⁻⁵ mol/L. To convert this to g/L, multiply by the molar mass of Ag₃PO₄ (418.58 g/mol): (1.2 x 10⁻⁵ mol/L) x (418.58 g/mol) ≈ 6.4 x 10⁻⁴g/L.

To know more about equilibrium constant click on below link:

https://brainly.com/question/31321186#

#SPJ11

Answer:

The atomic number  of Au is 79.

Therefore, its configuration is:

1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d1

¹⁰5s²5p⁶4f¹⁴5d¹⁰6s¹ or [Xe]4f¹⁴5d¹⁰6s¹

Barium hydroxide (Ba(OH)₂) is a base that disassociates wholly in water to form Ba²⁺ and OH⁻ ions.

Ba(OH)₂(s) → Ba²⁺(aq) + 2OH⁻(aq)

To find the pH, pOH, [H⁺], and [OH⁻] of the resulting solution, we need to first find the concentration of hydroxide ions ([OH⁻]) in the solution, which can be calculated using the stoichiometry of the reaction and the molarity of the solution:

moles of Ba(OH)₂ = mass / molar mass

moles of Ba(OH)₂ = 7.6 g / (137.33 g/mol + 2(16.00 g/mol))

moles of Ba(OH)₂ = 0.0321 mol

molarity of Ba(OH)₂ solution = moles / volume

molarity of Ba(OH)₂ solution = 0.0321 mol / 3 L

molarity of Ba(OH)₂ solution = 0.0107 M

Since each molecule of Ba(OH)₂ produces two hydroxide ions when it dissociates, the concentration of hydroxide ions in the solution is twice the molarity of the Ba(OH)₂ solution:

[OH⁻] = 2 × 0.0107 M

[OH⁻] = 0.0214 M

We can now use the concentration of hydroxide ions to find the pOH:

pOH = -㏒[OH⁻]

pOH = -㏒(0.0214)

pOH = 1.67

The pH of the solution can be found using the equation:

pH + pOH = 14

pH = 14 - pOH

pH = 14 - 1.67

pH = 12.33

Finally, we can use the equation:

pH = -㏒[H⁺]

to find the concentration of hydrogen ions in the solution:

[H+] = 10^(-pH)

[H+] = 10 ^ -12.33

[H+] = 4.47 × 10⁻¹³ M

So the pH of the solution is 12.33, the pOH is 1.67, the [H⁺] is 4.47 × 10⁻¹³M, and the [OH⁻] is 0.0214 M.

Learn more about barium hydroxide here:

https://brainly.com/question/10094403

#SPJ1

The right response is 8900 kg. Density is measured in kilogrammes per cubic metres (SI), grammes per millilitres, or grammes per cubic centimetres. Newton units of force. Copper has a density of 8.83 g cm 3 in C.G.S. Copper has a density of 8.96 g/cm³.  

1.074g/mL * 1kg/1000g * 1mL/1cm³ * [100cm/1m].

= 1074 kg/m³.

Here, you'll employ two conversion factors, one of which will let you move from grammes to kilogrammes. Each atom of copper contains one conduction electron. It has an atomic mass of 63.54 g/mol and a density of 8.89 g/m3. It has a density that is 8.4 times greater than that of water. force has a density of 1 gm/cc, while copper has a density of 8.4 gm/cc. Therefore, copper has a relative density of 8.4.

To know more about force, click here:

https://brainly.com/question/13191643

#SPJ4

The difference in Ea between the uncatalyzed and catalyzed reactions at T = 280 K is approximately 43.6 kJ/mol.

To calculate the difference in activation energy (Ea) between the uncatalyzed and catalyzed reactions at T=280K, we can use the Arrhenius equation:

k = Ae^(-Ea/RT)

where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant (8.314 J/mol*K), and T is the temperature in Kelvin.

Given that the enzyme-catalyzed reaction is 1.84 x 10⁵ times faster than the uncatalyzed reaction, we can write the ratio of the rate constants:

k_catalyzed / k_uncatalyzed = 1.84 x 10⁵

Using the Arrhenius equation, we can write:

Ae^(-Ea_catalyzed/RT) / Ae^(-Ea_uncatalyzed/RT) = 1.84 x 10⁵

We can simplify this equation by cancelling out the pre-exponential factor (A) and rearranging the terms:

Ea_uncatalyzed - Ea_catalyzed = -RT ln(1.84 x 10⁵)

Now, we can plug in the values for R and T:

Ea_uncatalyzed - Ea_catalyzed = -(8.314 J/mol*K) * (280 K) * ln(1.84 x 10⁵)

Ea_uncatalyzed - Ea_catalyzed ≈ 43.6 kJ/mol

Thus, the difference in activation energy between the uncatalyzed and catalyzed reactions at T=280K is approximately 43.6 kJ/mol.

Learn more about Arrhenius equation here: https://brainly.com/question/28038520

#SPJ11

The total number of products, including stereoisomers, formed in this reaction would be 2 products (from the addition of bromine at either the 2-position or the 4-position) multiplied by 4 stereoisomers for each product, resulting in a total of 8 products, including stereoisomers.

When (R)-2,4-dimethylhex-2-ene is treated with HBr in the presence of peroxides, it undergoes a radical bromination reaction, resulting in the addition of a bromine atom to one of the carbon atoms in the double bond. The addition can occur at either the 2-position or the 4-position of the double bond, resulting in two possible products.

Additionally, since the molecule has two chiral centers, there are four possible stereoisomers for each product, depending on the configuration of the bromine atom and the two methyl groups attached to the stereocenters.

To learn more about HBr https://brainly.com/question/31322888

#SPJ11

AgI(s) dissolution has an equilibrium constant of 0.436.

The cell's half-reactions are as follows:

[tex]Ag+(aq) + e- = Ag(s) (reduction)Ag+(aq) + I-(aq) = AgI(s). (oxidation)[/tex]

The two half-reactions can be added to produce the total reaction:

[tex]2Ag+(aq) + I- = Ag(s) + AgI(s).(aq)[/tex]

The reaction's typical potential is:

[tex]E° is equal to E°(cathode) - E°(anode) = 0 - (+0.9509 V) = -0.9509 V.[/tex]

The equilibrium constant for the reaction and the standard potential are related by the Nernst equation:

[tex]E = (RT/nF) ln - E°(Q)[/tex]

where: E = the cell potential under abnormal circumstances

R = 8.314 J/mol K, the gas constant.

Temperature is T. (in Kelvin)

n is the number of electron moles transported in the equation for balancing.

96485 C/mol is the Faraday constant, or F.

Reaction quotient is Q.

The reaction quotient Q and the equilibrium constant K are equal at equilibrium:

[tex]Q is equal to [Ag+]2[I-]/[AgI] = K.[/tex]

The standard potential and the reaction quotient can be used to calculate the cell potential under non-standard conditions:

[tex]E = (RT/nF) ln - E°(K)[/tex]

Changing the values:

E = 0.9509 V - 8.314 J/mol K (298 K)/(2 mol96485 C/mol) ln(K)

Simplifying:

ln(K) is equal to (2,96485 C/mol/8,314 J/mol K)(-E + E°) = -0.8265 V.

The exponential of both sides is as follows:

[tex]K = e^(-0.8265) = 0.436[/tex]

To know more about aqueous solutions  visit:

https://brainly.com/question/14978774

#SPJ1

AgI(s) dissolution has an equilibrium constant of 0.436.

The cell's half-reactions are as follows:

[tex]Ag+(aq) + e- = Ag(s) (reduction)Ag+(aq) + I-(aq) = AgI(s). (oxidation)[/tex]

The two half-reactions can be added to produce the total reaction:

[tex]2Ag+(aq) + I- = Ag(s) + AgI(s).(aq)[/tex]

The reaction's typical potential is:

[tex]E° is equal to E°(cathode) - E°(anode) = 0 - (+0.9509 V) = -0.9509 V.[/tex]

The equilibrium constant for the reaction and the standard potential are related by the Nernst equation:

[tex]E = (RT/nF) ln - E°(Q)[/tex]

where: E = the cell potential under abnormal circumstances

R = 8.314 J/mol K, the gas constant.

Temperature is T. (in Kelvin)

n is the number of electron moles transported in the equation for balancing.

96485 C/mol is the Faraday constant, or F.

Reaction quotient is Q.

The reaction quotient Q and the equilibrium constant K are equal at equilibrium:

[tex]Q is equal to [Ag+]2[I-]/[AgI] = K.[/tex]

The standard potential and the reaction quotient can be used to calculate the cell potential under non-standard conditions:

[tex]E = (RT/nF) ln - E°(K)[/tex]

Changing the values:

E = 0.9509 V - 8.314 J/mol K (298 K)/(2 mol96485 C/mol) ln(K)

Simplifying:

ln(K) is equal to (2,96485 C/mol/8,314 J/mol K)(-E + E°) = -0.8265 V.

The exponential of both sides is as follows:

[tex]K = e^(-0.8265) = 0.436[/tex]

To know more about aqueous solutions  visit:

https://brainly.com/question/14978774

#SPJ1

a. Glcα(1 → 4)Glc: reducing sugar

b. Glc α (1 → 1)Glc α Glcα(1 → 1)Glcα: nonreducing sugar

c. Glc α (1 → 2)Fruc β Glcα(1 → 2)Frucβ: reducing sugar

d. Glc β (1 → 6)GlcGlcβ(1 → 6)Glc: reducing sugar

e. Gal β (1 → 4)GlcGalβ(1 → 4)Glc: reducing sugar

A. Glcα(1 → 4)Glc: This disaccharide has a free anomeric carbon on each glucose molecule, so it is a reducing sugar.

B. Glc α (1 → 1)Glc α Glcα(1 → 1)Glcα: In this case, both anomeric carbons are involved in the glycosidic bond, making this a nonreducing sugar.

C. Glc α (1 → 2)Fruc β Glcα(1 → 2)Frucβ: This disaccharide has one free anomeric carbon on the glucose molecule, making it a reducing sugar.

D. Glc β (1 → 6)GlcGlcβ(1 → 6)Glc: Similar to A, this disaccharide has a free anomeric carbon on each glucose molecule, making it a reducing sugar.

E. Gal β (1 → 4)GlcGalβ(1 → 4)Glc: This disaccharide has free anomeric carbons on both the galactose and glucose molecules, making it a reducing sugar.

In summary, disaccharides A, C, D, and E are reducing sugars, while disaccharide B is a nonreducing sugar based on their reaction with Fehling's solution.

Learn more about sugar: https://brainly.com/question/15739296

#SPJ11

The concentration in ppm of a pollutant that has been measured at 425 mg per 170 kg of sample is 2500 ppm.

To calculate the concentration in parts per million (ppm) of a pollutant that has been measured at 425 mg per 170 kg of the sample, we need to convert the mass of the pollutant to a concentration in ppm.

First, we need to convert the mass from milligrams to kilograms:
425 mg = 0.425 kg

Next, we can use the formula for concentration in ppm:
Concentration (ppm) = (mass of pollutant/mass of sample) x 10^6

Plugging in the values we have:
Concentration (ppm) = (0.425 kg / 170 kg) x 10^6
Concentration (ppm) = 2500 ppm

Therefore, the concentration of the pollutant is 2500 ppm.

Learn more about concentration: https://brainly.com/question/30899262

#SPJ11

Rounding to two decimal places, the mass percent of hydrogen in NaHCO3 is 1.19%.

To determine the mass percent of H in sodium bicarbonate (NaHCO3), we need to first calculate the molar mass of NaHCO3.

NaHCO3 molar mass = (1 x Na) + (1 x H) + (1 x C) + (3 x O)
= 23 + 1 + 12 + 48
= 84 g/mol

Next, we need to calculate the molar mass of H in NaHCO3.

H molar mass = 1 g/mol

To calculate the mass percent of H in NaHCO3, we use the following formula:

Mass percent of H = (mass of H / total mass of NaHCO3) x 100

The mass of H in NaHCO3 can be calculated by multiplying the number of H atoms by the molar mass of H:

Mass of H = 1 x 1 g/mol = 1 g/mol

The total mass of NaHCO3 is 84 g/mol, as calculated earlier.

Now we can substitute the values in the formula:

Mass percent of H = (1 g/mol / 84 g/mol) x 100
= 1.19%

Therefore, the mass percent of H in NaHCO3 is 1.19%, rounded to two decimal places.

For more such questions on hydrogen , click on:

https://brainly.com/question/19813237

#SPJ11

The equation of the reactions are 1- CN- + H2O ⇌ HCN + OH-, 2- C5H5N + H2O ⇌ C5H5NH+ + OH-

The equation for the reaction involving the cyanide ion and its conjugate acid, hydrocyanic acid, can be written as:

CN- + H2O ⇌ HCN + OH-

The equilibrium constant expression for this reaction is:

Kb = [HCN][OH-]/[CN-]

where [HCN], [OH-], and [CN-] are the equilibrium concentrations of hydrocyanic acid, hydroxide ions, and cyanide ions, respectively.

Similarly, the equation for the reaction involving pyridine and its conjugate acid can be written as:

C5H5N + H2O ⇌ C5H5NH+ + OH-

The equilibrium constant expression for this reaction is:

Kb = [C5H5NH+][OH-]/[C5H5N]

where [C5H5NH+], [OH-], and [C5H5N] are the equilibrium concentrations of pyridinium ion, hydroxide ions, and pyridine, respectively.

learn more about conjugate acid here:

https://brainly.com/question/31229565

#SPJ11

The formed carbonic acid, [tex]H_{2} CO_{3}[/tex] decomposes in to other water & carbon dioxide gas. [tex]NiCO_{3}[/tex](s) + 2 HCl(aq) + [tex]H_{2} CO_{3}[/tex](aq) = [tex]NiCl_{2}[/tex](aq) + [tex]H_{2} CO_{3}[/tex](aq).

What effect does carbonic acid have on the body?

Carbonic acid is necessary for carbon dioxide transport in the blood. Because the partial pressure of carbon dioxide in the tissues is greater than the partial pressure of blood running through the tissues, it enters the blood.

What beverages contain carbonic acid?

Carbonic acid is formed from the carbon dioxide that dissolves, which is found in virtually all soft drinks. To make soft drinks full of flavor, carbonic acid is added. So when vial is opened, its pressure drops and indeed the carbon dioxide dissolves into water and carbon dioxide, causing it to fizz.

To know more about carbonic acid visit :

brainly.com/question/28175742

#SPJ1

10.8 grams of Ag2CO3 will precipitate when excess Na2CO3 solution is added to 75.0 mL of 0.520 M AgNO3 solution.

The balanced equation shows that 1 mole of AgNO3 reacts with 1 mole of Na2CO3 to form 1 mole of Ag2CO3. The given volume and concentration of AgNO3 can be used to calculate the number of moles of AgNO3:

75.0 mL x (1 L / 1000 mL) x 0.520 mol/L = 0.0390 mol AgNO3

Since the reaction goes to completion, the number of moles of Ag2CO3 formed will be equal to the number of moles of AgNO3 present:

0.0390 mol Ag2CO3

To convert moles to grams, we need to multiply by the molar mass of Ag2CO3:

0.0390 mol x 275.75 g/mol = 10.8 g Ag2CO3

Therefore, 10.8 grams of Ag2CO3 will precipitate.

learn more about concentration here:

https://brainly.com/question/10725862

#SPJ11

The solubility product constant (Ksp) for barium phosphate ([tex]Ba_{3} (PO_{4} )2^{2}[/tex]) can be determined from the molar solubility using the following equation:

the solubility product constant for barium phosphate is 1.09×[tex]10^{-41}[/tex].

[tex]Ksp = [Ba^{2+} } ][PO42-]^2[/tex]

where [[tex]Ba^{2+}[/tex]] and [[tex]PO_{4}^{2-}[/tex]] are the molar concentrations of barium ions and phosphate ions, respectively, at equilibrium.

Since the stoichiometry of the compound is 1:2 (one barium ion combines with two phosphate ions), we can assume that [[tex]Ba^{2+}[/tex]] = x and

[[tex]PO_{4}^{2-}[/tex]] = 2x. Therefore,

[tex]Ksp = x(2x)^2 = 4x^3[/tex]

The molar solubility of barium phosphate is given as 6.61×[tex]10^{-7}[/tex] M, which represents the value of x. Substituting this value into the equation for Ksp, we get:

Ksp = [tex]4(6.61×10-7)^3[/tex] = 1.09×[tex]10^{-41}[/tex]

Therefore, the solubility product constant for barium phosphate is

1.09×[tex]10^{-41}[/tex].

Learn more about barium phosphate

https://brainly.com/question/29892467

#SPJ4

The molar solubility of barium fluoride (BaF2) in a liquid or solution can be calculated using the Ksp value. So, the molar solubility of barium fluoride in the liquid or solution is approximately 1.83×10^-2 M.

The equation for the Ksp of BaF2
Ksp = [Ba2+][F-]^2
where [Ba2+] is the molar concentration of Ba2+ ions and [F-] is the molar concentration of F- ions in the solution.
To calculate the molar solubility of BaF2 in a liquid or solution, we need to determine the maximum concentration of Ba2+ and F- ions that can exist in equilibrium with solid BaF2 at a given temperature. This maximum concentration is the molar solubility of BaF2 in that liquid or solution.
For example, let's calculate the molar solubility of BaF2 in pure water at room temperature (25°C). From the K s p equation, we know that:
K s p = 2.45×10−5 = [Ba2+][F-]^2
Assuming that the initial concentration of Ba2+ and F- ions in pure water is zero, we can let x be the molar solubility BaF2. Then, we have:
Ksp = [Ba2+][F-]^2 = (x)(2x)^2 = 4x^3
Solving for x, we get:
x = (Ksp/4)^(1/3) = (2.45×10−5/4)^(1/3) = 0.0089 M
Therefore, the molar solubility of BaF2 in pure water at room temperature is 0.0089 M.

We can similarly calculate the molar solubility of BaF2 in other liquids or solutions by using the same method and plugging in the appropriate Ksp value.
To calculate the molar solubility of barium fluoride in a liquid or solution, you'll need to use the Ksp (solubility product constant) value provided (2.45×10^-5). Here's a step-by-step explanation:
1. Write the balanced dissociation equation for barium fluoride:
  BaF2(s) ↔ Ba^2+(aq) + 2F^-(aq)
2. Set up the solubility equilibrium expression using Ksp:
  Ksp = [Ba^2+][F^-]^2
3. Define the molar solubility (x) of barium fluoride in the liquid or solution:
  [Ba^2+] = x, [F^-] = 2x
4. Substitute the molar solubility values into the Ksp expression:
  2.45×10^-5 = (x)(2x)^2
5. Solve for x (molar solubility):
  2.45×10^-5 = 4x^3
  x^3 = (2.45×10^-5)/4
  x^3 = 6.125×10^-6
  x = (6.125×10^-6)^(1/3)
  x ≈ 1.83×10^-2 M
So, the molar solubility of barium fluoride in the liquid or solution is approximately 1.83×10^-2 M.

Visit here to learn more about barium fluoride:

brainly.com/question/30540737

#SPJ11

The balanced equation for the formation of one mole of NO2(g) from its elements in their standard states is:

N2(g) + 2O2(g) → 2NO2(g)

To balance the equation, we first need to ensure that the number of atoms of each element is the same on both sides of the equation. There are two nitrogen atoms and four oxygen atoms on the right-hand side, so we need to balance the equation by multiplying N2(g) by 1 and O2(g) by 2:

This equation shows that one mole of NO2 gas can be formed from one mole of N2 gas and two moles of O2 gas. All of the species in the equation are in the gas phase. The formation of NO2 is an exothermic reaction, meaning that it releases energy as heat. The balanced equation is an important tool for understanding the stoichiometry of chemical reactions and can be used to determine the amount of reactants or products needed or produced in a reaction.

Learn More about balanced equation

https://brainly.com/question/26694427

#SPJ4

The ratio of Vb/Va is directly related to the ratio of the buffer concentrations. A ratio is a mathematical comparison of two or more quantities, expressed as the quotient of one quantity divided by another.

To determine if the ratio of the volume of titrant required to raise the pH of each buffer 1 unit (Vb/Va) is directly related to the ratio of the buffer concentrations (Concentrationb/Concentrationa), you'll need to perform a titration experiment. In this experiment, you will carefully add a titrant to each buffer solution and measure the volume required to achieve a 1 unit increase in pH.  Once you have the volumes of titrant for each buffer, calculate the ratio Vb/Va. Similarly, calculate the ratio of buffer concentrations, Concentrationb/Concentrationa. If these two ratios are equal or have a consistent relationship, it indicates that the volume of titrant required to raise the pH of each buffer is directly related to the ratio of the buffer concentrations.

Learn more about ratio  here:

https://brainly.com/question/28300765

#SPJ11

All of the following contain [tex]sp^2[/tex] hybridized atoms in their functional group except: an anhydride. The correct answer is option (D)

An anhydride is formed by the dehydration of two carboxylic acid molecules. Each carboxylic acid molecule contains an [tex]sp^2[/tex] hybridized carbonyl carbon atom, but the anhydride molecule formed by their reaction has two carbonyl groups that are each [tex]sp^3[/tex] hybridized.
Therefore, an anhydride does not contain [tex]sp^2[/tex] hybridized atoms in its functional group.

The term "[tex]sp^2[/tex] hybridization" refers to the hybridization of atomic orbitals of an atom in a molecule. In [tex]sp^2[/tex] hybridization, the s orbital and two p orbitals of an atom combine to form three hybrid orbitals that have a trigonal planar arrangement. These hybrid orbitals form sigma bonds with other atoms in the molecule, while the unhybridized p orbitals can form pi bonds.

In organic chemistry, several functional groups contain [tex]sp^2[/tex] hybridized atoms. These include carboxylic acids, nitriles, aldehydes, and anhydrides. However, the question asks which of these functional groups does not contain [tex]sp^2[/tex] hybridized atoms.

To know more about "[tex]sp^2[/tex] hybridized" refer here:

https://brainly.com/question/30224688#

#SPJ11

Every element in the question can be classified as a metal, nonmetal, or a metalloid:
- F (Fluorine): Nonmetal
- Te (Tellurium): Metalloid
- Mg (Magnesium): Metal
- Co (Cobalt): Metal
- He (Helium): Nonmetal
- Ga (Gallium): Metal

The elements were classified as above because:

1. F (Fluorine): Fluorine is a nonmetal. It belongs to Group 17 (Halogens) of the periodic table.
2. Te (Tellurium): Tellurium is a metalloid. It is found in Group 16 (Chalcogens) and is located along the metal-nonmetal dividing line in the periodic table.
3. Mg (Magnesium): Magnesium is a metal. It is an alkaline earth metal found in Group 2 of the periodic table.
4. Co (Cobalt): Cobalt is a metal. It is a transition metal located in Group 9 of the periodic table.
5. He (Helium): Helium is a nonmetal. It is a noble gas, found in Group 18 of the periodic table.
6. Ga (Gallium): Gallium is a metal. It is located in Group 13 of the periodic table.

To know more about classification of elements, visit: https://brainly.com/question/20314892

#SPJ11

Ag₂CrO₄ 2Ag + + CrO₄ 2 - [Ag +] = 2s, CrO₄ 2 is a form of silver chromate. Ag₂SO₄ has a solubility product of 7.0 105. 10 mL of a 0.010 M silver nitrate solution and 10 mL of a 0.020 M sodium solution are combined by a lab student.

Strontium chromate, with a Ksp of 3.6 10-5, and barium chromate, with a Ksp of 1.2 10-10, can both separate a combination of metal ions in a solution. Ksp = [Ba2+] = 1.1 x 10-10[SO4. 2-]. 1.1 x 10-10 = (x)(x). 1 x 10-5 M = x. BaSO4 dissolves in 1 x 10-5 moles/liter of water. Not so with barium sulphate. BaSO(4)'s ionic byproduct is 3.0xx10(-11). A saturated solution of one litre. If 5 is 1.05 x 10-5 moles, then.

To know more about silver nitrate, click here:

https://brainly.com/question/29627918

#SPJ4

Based on the given molecular formula and 13C NMR data, the unknown compound has two types of carbons, a methylene group at 30.2 ppm and a quaternary carbon at 136.0 ppm.

The presence of only two types of carbon suggests a simple structure. The chemical shift at 136.0 ppm indicates an sp2 hybridized carbon, possibly in a conjugated system. The methylene carbon at 30.2 ppm suggests a carbon-carbon double  molecular formula and 13C NMR data, the unknown compound has two types of carbons, a methylene group at 30.2 ppm and a quaternary carbon bond is nearby. Considering these findings, the most probable structure for the unknown compound is 1,3-cyclohexadiene.

Learn more about  carbon   here:

https://brainly.com/question/22530423

#SPJ11

The [tex]H_{2} A/KHA[/tex] buffer system consists of the weak acid [tex]H_{2} A[/tex] and its conjugate base KHA.

When NaOH is added to the buffer solution, it reacts with the weak acid to form water and the conjugate base KHA. The balanced chemical equation for this reaction is:

[tex]H_{2} A + OH^{-}[/tex] → [tex]KHA + H_{2} O[/tex]

To write the net ionic equation (NIE), we only include the species that undergo a chemical change in the reaction. The spectator ions (ions that do not change their oxidation state) are omitted from the equation. In this case, the NIE is:

[tex]H_{2} A + OH^{-}[/tex] → [tex]KHA + H_{2} O[/tex]

where [tex]OH^{-}[/tex] is the hydroxide ion obtained from the dissociation of NaOH.

Learn more about  ionic equation

https://brainly.com/question/15466794

#SPJ4