If one electron is removed from sodium during a reaction, which energy level becomes the valence shell?

The final concentration assuming the volumes are additive when a 71.0 ml portion of a 1.50 m solution is diluted to a total volume of 258 ml. a 129 ml portion of that solution is diluted by adding 149 ml of water is 0.191 M

This can be solved by using the dilution factor.

So the dilution factor for the first dilution is 71.0 ml to 258 ml

DF1=258/71=3.63

For the first solution, the dilution factor is

3.163, refers that the concentration is decreased by a factor of 3.163.

The concentration of diluted solution is

c(diluted)=1.50/3.63=0.413

Now, you take a sample of 129 mL of this diluted solution and add another 165 mL of water. So,

V(final)=129ml +149 ml=278 mL

The concentration of the 129 mL sample is equal to the concentration of the first diluted solution, i.e. 0.413 M

So,

DF2=278/129=2.155

So, the final concentration is

c(final)=0.413/2.155=0.191 M

To learn more about dilution visit:

brainly.com/question/15718488

#SPJ4

By using the specific heat capacity of water, the temperature of the water in the cup is found to reach 38.5℃ assuming the cup absorbs negligible heat as it is a perfect insulator.

The specific heat capacity of a substance is defined as the amount of heat (J) absorbed per unit mass (kg) when its temperature rises 1 K (or 1 °C).

The specific heat capacity of a solid is determined by its mass, temperature change, and solid nature.

Specific heat capacity is useful in calculating processing temperatures and the amount of heat required for processing, as well as in distinguishing between two polymeric composite materials.

No. of moles of CaO available = 10.1 / 56 = 0.18 mol

Since 1 mol reactant supplies 64.8 kJ, thus 0.18 mol gives = 11.69 kJ

Therefore, we have 11.69 kJ heat available

Now,

ΔH = mCΔT

where,

ΔH = heat supplied

C = specific heat

ΔT = rise in temperature

Therefore,

ΔT = ΔH/mC = 17.8

Thus,

Final temperature = 18 + 17.8 = 35.8℃

Result:

Hence, (B) 35.8℃ is the temperature of the water in the cup.

Learn more about Specific heat capacity of water here:

https://brainly.com/question/16952828

#SPJ4

The empirical and molecular formula of a compound that has the aforementioned percentages are CClH₂ and C₂Cl₂H₄ respectively.

The empirical formula, which is a notation indicating the ratios of the various elements present in a compound, without regard to the actual numbers, can be calculated as follows:

Next, we divide by the smallest mole value as follows:

The empirical ratio of Cl:C:H is 1:1:2, hence, the empirical formula is CClH₂.

The molecular formula can be calculated as follows:

{CClH₂}n = 98.96g/mol

(12 + 35.5 + 2)n = 98.96

49.5n = 98.96

n = 2

The molecular formula of the compound is C₂Cl₂H₄

Learn more about molecular formula at: https://brainly.com/question/14044066

#SPJ1

The empirical and molecular formula for the compound is CClH₂ and C₂Cl₂H₄ respectively.

Empirical formula is defined as a chemical formula where the number of atoms in the molecule is replaced by the most basic ratio of the elements in the compound.

Molecular formula is defined as a chemical formula that specifies how many atoms of each element there are in total in each substance's molecules.

Without respect to actual quantities, the empirical formula, which is a notation representing the ratios of the different elements contained in a compound, can be determined as follows:

71.65% Cl = 71.65g ÷ 35.5 = 2.02mol

24.27% C = 24.27g ÷ 12 = 2.0223mol

4.07% H = 4.07g ÷ 1 = 4.07mol

The smallest mole value is

Cl = 2.02mol ÷ 2.02 = 1

C = 2.0223mol ÷ 2.02 = 1

H = 4.07mol ÷ 2.02 = 2

So the empirical formula is CClH₂

The molecular formula can be calculated as

[CClH₂]n = 98.96g/mole

(12 + 35.5 + 2)n = 98.96

49.5n = 98.96

n = 2

So, the molecular formula is C₂Cl₂H₄

Thus, the empirical and molecular formula for the compound is CClH₂ and C₂Cl₂H₄ respectively.

To learn more about empirical formula, refer to the link below:

https://brainly.com/question/14044066

#SPJ1

Answer:

so it is D mark as brainlist plss Explanation:

The statement that describe nonspontaneous reaction is the The Gibbs free energy for the reaction is positive.

What is non spontaneous reaction?

Nonspontaneous reaction is a type of chemical reaction that does not support or give room for products to be formed at given conditions. For a reaction to be nonspontaneous,it must be an endothermic reaction that is heat is absorbed from the surrounding and there must be decrease in entropy, or increase. The Gibbs free energy is positive.

Therefore, The statement that describe nonspontaneous reaction is the The Gibbs free energy for the reaction is positive.

The red color is emitted when electrons in the gas return to ground state.

From the Bohr model, we know that an electron in atom could be found in its lowest energy state. The electron could receive energy in this lowest energy state and move to a higher energy state called the excited sate. The lower energy state that the electron was at the first is called the ground state of the electron.

As the electrons return to ground states, photons of light of a characteristic wavelength is emitted. The color of the light shows the wavelength of the light emitted.

Learn more about Bohr model:https://brainly.com/question/3964366

#SPJ1

A mutation is an organism's genetic code that affects a trait. Therefore, option (A) is correct.

A mutation is a change in a genetic sequence that include changes as small as the substitution of a nucleotide base or a single DNA building block with another nucleotide base.

The DNA sequence can sometimes undergo changes in its base-pairs sequence is termed a mutation. A mutation changes proteins translated by the DNA. The cells can usually recognize the damage caused by mutation.

A mutation is a heritable modification in the traits of an organism. The term “mutant” indicates a person who has these heritable alterations. Mutations generally produce recessive genes. In rock pocket mouse, a mutation in the gene for fur color causes black fur instead of the brown fur found in mice without the mutation.

Learn more about mutation, here:

https://brainly.com/question/13923224

#SPJ1

There are many applications for hydrochloric acid. It is used for the production of chlorides, fertilizers and dyes, as well as in galvanic plating and in the photographic, textile and rubber industries.

Eyes, skin and mucous membranes are corroded by hydrochloric acid. In humans, acute (short-term) inhalation exposure may cause eye, nose, and respiratory tract irritation, as well as inflammation and pulmonary edema. Acute oral exposure can cause mucosal, esophageal, and stomach burns, and dermal contact can cause severe burns, ulceration, and scarring in humans. Gastritis, chronic bronchitis, dermatitis, and photosensitization have all been associated with chronic (long-term) exposure to hydrochloric acid. Long-term exposure to low concentrations can also cause tooth discoloration and erosion. Hydrochloric acid has not been classified as a carcinogen by the EPA.

Learn more hydrochloric acid here-

https://brainly.com/question/15231576

#SPJ4

Match each subatomic particle with the correct descriptions

Has a positive charge - proton

Has a negative charge - electron

Has a neutral charge = neutron

Found in nucleus of atom - proton and electron

Mass of 1 AMU - proton and neutron

Subatomic particle are the particle which is smaller than atom in size or of or relating to the inside of the atom

Know more about proton neutron electron

https://brainly.com/question/14020937

#SPJ1

The precise proportion of air to a combustible gas or vapor at which complete combustion occurs is known as the stoichiometric ratio.

To determine the stoichiometry by mass, multiply the quantity of molecules needed for each reactant by its molar mass to get the mass of each reactant per mole of reaction. Divide each by the sum of the reactions to determine the mass ratios.

In the field of chemistry known as stoichiometry, needed quantitative data is ascertained by exploiting relationships between the reactants and/or products of a chemical process. Stoichiometry literally translates as the measure of elements because the Greek words stoikhein and metron both mean element and measure, respectively.

2NH3 (gas) + 5F2 → N2F4 + 6HF

    34g          190g     104g

Quantity of N2F4​ created from 2gNH3 = (104/34) × 2 = 6.12

Quantity of N2F4​ created from 8gF2 = (104​/109) × 8 = 4.38

N2​F4 ​will be limited, and the real product weight is 3.56 g.

Yield % = (Actual product quantity / calculated product quantity) x 100

             = (3.56 / 4.83) x 100

             = 81.28%

To know more about stoichiometric ratio, click on the link below:

https://brainly.com/question/19819068

#SPJ9

John Dalton made some hypothesis about the structure of atom. He proposed that matter is composed of great number of indivisible particles called atoms they can neither be destroyed nor be created.

There are different theories regarding the structure and electronic properties of an atom. Many scientists contributed to the modern theory of atomic structure in which John Dalton was first to mention the word atom.

According to Dalton' theory, matter is composed of indivisible particles called atoms. Atoms can neither be created nor be destroyed. All the atoms of the same element are identical in all aspects.

Atoms of different elements are different and the compounds are formed by the combination of atoms.  Dalton's theory provided a sound basis for the laws of chemical combination and also several properties of gases and liquids known at that time.

However, he could not explain the reason for chemical combination of atoms and did not give any idea about the existence of isotopes and isobars.

Hence, the main aspects of Dalton's theory was the indivisibility of atoms and the chances of chemical combination.

To learn more about Dalton's theory, find the link below:

https://brainly.com/question/11855975

#SPJ1

Donald rides his bicycle 12 km north, turns around, and then rides the bicycle 9 km back toward his starting point.

He rides total 21 km .

An object, a concept, or a collection of data that can be utilized to start a process or conversation. The essay provided a good place to start for our conversation.

Your beginning point is the location from where you begin a journey. Safaris into northern Tanzania's game parks and reserves depart from the recently constructed airport. From their starting position, they had already traveled a few miles or more on foot.

A baseline is a beginning or the beginning of something.

The baseline line is always crucial and can be used as a basis for comparison.

In many fields, including medicine, the baseline data—which is the data discovered at the start of a study—is employed.

Every person's base line or start up is equally important and significant, and it's frequently taken seriously to avoid mistakes that might not be readily rectified.

To know more about Starting point please click here ; https://brainly.com/question/17438205

#SPJ13

Answer: Hope this helps!

Explanation:

Oxygen has the atomic number 8; its atoms contain 8 protons and 8 electrons. Uranium has the atomic number 92; its atoms contain 92 protons and 92 electrons.

I don't know if this is what your looking for but i think it should help!

Group B is incorrect and they most likely added too much acid. Option D.

Group B Streptococci Group B Streptococci GBS are bacteria that naturally occur and migrate in the body. Although most of the time the bacteria are not harmful, they can cause serious illness in people of all ages. In fact group, B streptococcal disease is a common cause of serious infections in newborns. A positive test result means you have a group B streptococcal infection.

This doesn't mean you will get sick or affect your baby, but it does mean that you are at a higher risk of passing the bacteria on to your baby. Group B Streptococcus also known as Group B Streptococcus GBS is a type of bacterial infection found in the vagina or rectum of pregnant women. This bacterium is normally found in the vagina and/or rectum of about 25% of healthy adult women. GBS-positive females are considered colonized.

Learn more about Group B acid here:-https://brainly.com/question/10864774

#SPJ1

The idea is to foretell the formation of a carbonyl compound by the reaction between alcohol and too much pyridinium chlorochromate. An oxidizing agent called pyridinium chlorochromate converts the alcohol group into the 1carbonyl group.

The carbonyl molecule that results from the reaction will depend on the reactant's OH group. Pyridinium chlorochromate [PCC] converts primary OH to aldehydes, whereas it converts secondary OH to ketones, and oxidation of tertiary OH has little effect. Alcohols and pyridinium chlorochromate [PCC] react to create a carbonyl molecule.

From primary alcohols to aldehydes and from secondary alcohols to ketones, pyridinium chlorochromate oxidizes alcohols one step up the oxidation ladder. pyridinium chlorochromate will not oxidize aldehydes to carboxylic acids, in contrast to chromic acid. Comparable to Pyridine (the Collins reagent) and CrO3 will both oxidize primary alcohols to aldehydes. Here are two instances of pyridinium chlorochromate being used.

Learn more about pyridinium chlorochromate here:-

https://brainly.com/question/28099011

#SPJ4

The described molecule has 2 regions of high electron density (RHEDs). This is determined using the basics of molecule geometry and the VSEPR model.

If a molecule has three atoms, but only two bonds (1 single bond and 1 triple bond), then that molecule needs to be linear, especially because there are no lone pairs on any of the atoms. According to the VSEPR model (valence shell electron pair repulsion), each bond (it doesn't matter if it's a single, double, or triple bond) and lone pair is considered a separate region of high electron density.

Because we only have two bonds and no lone pairs, it follows that we only have two RHEDs.

You can learn more about the VSEPR model here:
brainly.com/question/6803518

#SPJ4

An electrophile substitutes an atom that is affixed to an aromatic ring in electrophilic aromatic substitution reactions, which are organic processes. Typically, in these reactions, an electrophile takes the place of a hydrogen atom from a benzene ring.

Most beginning organic chemistry courses cover six fundamental electrophilic aromatic substitution reactions: chlorination, bromination, nitration, sulfonation, Friedel-Crafts alkylation, and Friedel-Crafts acylation.

Thus, electron density rises in the ortho and para positions of the aromatic ring as a result of the hydroxyl group in phenol acting as an electron donor. Therefore, electrophilic substitution of phenol occurs more readily than that of benzene.

The proton is removed from the benzene ring in the second stage of the aromatic electrophilic substitution process of a benzene ring after the electrophile hits the ring in the first step and forms an intermediate.

learn more about electrophilic substitution refer

https://brainly.com/question/14803468

#SPJ4

We can see that the reaction is endothermic hence it would be shifted to the left by;

1) Decreasing the concentration of ammonia

2) Increasing the pressure of the system

We know that the position of the equilibrium could be affected when the parameters of the reaction are altered. Thus we often say in chemistry that when a constraint is imposed on a system that has already attained equilibrium, then the system must have undergo a through readjustment of itself so that it could be able to annul the constraint.

Let us note that that we want the equilibrium position to move to the left in this case and have more products.

Learn more about equilibrium position:https://brainly.com/question/10374921

#SPJ1

The mineral shown in the photo is Biotite as there are large crystals of a soft, dark, and flaky material.

A typical class of mica group phyllosilicate minerals is called biotite. Between the iron-endmember annite and the magnesium-endmember phlogopite, there is largely a solid-solution series; other more aluminous end-members are siderophyllite and eastonite.

Black mica called "biotite" has flawless cleavage and a vitreous sheen on the faces of the cleavage. Thin sheets of the mineral biotite are flexible but will shatter under heavy bending when separated. The sheets are transparent to translucent and appear brown, gray, or green when held up to the light.

The other mineral options are not correct because Feldspar has a white or light orange shade, Quartz is colourless and shiny, whereas Calcite is usually white or colourless.

The complete question is:

The photo shows a close-up of the surface of one of the sheets from the rock in part 1. Note the large crystals of a dark, soft, flaky mineral. What mineral is it?

a) Feldspar

b) Biotite

c) Quartz

d) Calcite

Learn more about the Biotite here:

https://brainly.com/question/13389983

#SPJ4

Silica gel is polar, sure. If three doors are present at this time and you look at the TNC played here, this door is performing the less polar structure. And the more polar one is displayed here.

The first question in this query asks us about silica gel's polar properties. Silica gel is therefore polar, yes. If three doors are present and the TNC is being played here, this door is performing the least polar structure.

And the more polar one is displayed here. The tile accidents' structure, I believe, is what comes next. As a result, the tile acetate has the following structure. He did it in a similar manner. And the magazine's structure is as follows.

This is a magazine, then. Nixon is made up of 12345 and six carbon atoms. This has six carbons in it.

In response to the second question, 75% of respondents indicated that they would be highly hesitant to give Zane a hug. The answer is 75/25". Since there is a greater amount of polar solvent, it will hesitate, and the magazine is a non-polar solvent.

Therefore, the new solvent is more dated than Poehler's new solvent. R. F values for sports rise as solvent concentration rises. Therefore, as the polarity of the solvent grows, our F values, office boards, and material become more connected to the solvent and move with it. Thus, all winter sports are faster in pollers. These sports have quicker paces.

To know more about polar click on the link:

https://brainly.com/question/3184550

#SPJ4

There is the neutron's total kinetic energy. E is the same as the final kinetic energy of the EF-2 carbon nucleus. Okay, I'm down one from k E F one. In other words, Jews, this is 1.3 incremental -13 -4, -3.69 into 10 to the Power -14. 1.3 into a power of 10 to the -13th Minour.

Two will equal twelve in one if we subscribe one river to the neutron and another to carbon. Okay. EI one, which is a brand-new drone's first kind of technology, is equivalent to one three into ten to thirteen. For the first support, no. Half of Mnu square is equal to E I and E F, respectively, as well as one V squared. Additionally, if you apply the law of conservation of momentum, M 1 - M 2 will equal 1 + M 2 into Vi, giving you v = 2 and M 1 - M 2. And to you, multiplied by M1 + M2, is mmhmm.

As a result, if you substitute, the answer to the second equation will be K E F 1, which is equal to half of M 1, which is divided by M 1 plus M 2 entire square to give you square. We make this much simpler. And if we divide KEF one by KEI one, we get four, which is equal to M1 plus M2 divided by M1. Cool square, can you divide 4 M1 12 by M 1 + 12? My father has all this. One divided by M. They were by 1 69, which is equal to 40.

This serves as the first support's response. The final kinetic energy is provided by k e F one as a result of the neutron's current technology being transmitted to carbon during the collision's second support. That is equivalent to 3.69 into 10 and 48 x 1, respectively, and to 1.3 into 10 to the power of 13 and 69. Jews, to the Power -14. There is the neutron's total kinetic energy. E is the same as the final kinetic energy of the EF-2 carbon nucleus. Okay, I'm down one from k E F one. In other words, Jews, this is 1.3 incremental -13 -4, -3.69 into 10 to the Power -14. 1.3 into 10 to the power -13 Minor of the original solution.

To know more about kinetic energy click on the link:

https://brainly.com/question/999862

#SPJ4

A list of techniques or tools that are used to record weather are:

The meteorologist's window into witnessing powerful storms is Doppler radar. It uses 159 radar towers spread out over the country to find all kinds of precipitation, the rotation of thunderstorm clouds, tornado debris in the air, and wind speed and direction.

Temperature is measured via thermometers. Humidity is measured via hygrometers. The quantity of water vapor in the air is known as humidity.

From space, weather satellites keep an eye on Earth and collect observational data that our scientists study. Geostationary satellites orbit the Earth at a fixed altitude, taking pictures of the entire planet as regularly as every 30 seconds.

Lastly, The upper stratosphere is where radiosondes float, where they gather and transmit information about air pressure, temperature, relative humidity, wind speed, and wind direction every second.

Learn more about weather from

https://brainly.com/question/920732

#SPJ1

In a titration, acetic acid is used as the analyte and sodium hydroxide is used as the titrant. At the equivalence point,  ph be higher than 7.

The equivalence point of the titration is that point at which enough titrant has been added to react with all of the substance being titrated. A strong acid with a weak base gives a slightly acidic salt. Likewise, a strong base with weak acid gives slightly basic salt.

When acetic acid react with NaOH then a salt sodium acetate and water is formed. Acetic acid, CH3COOH react with sodium hydroxide, to produce sodium acetate, CH3COONa and water

CH3COO- + H2O ---> CH3COOH + OH-

This reaction of the acetate ion makes the ph greater than 7.

At the equivalence point, moles of acetic acid is equal to the moles of sodium hydroxide. The solution will turn pink as more of sodium hydroxide is added.

To know more about equivalence point,  refer

https://brainly.com/question/24584140

#SPJ4

Gas is a type of matter that has no defined shape or volume. Gases can be made up of a single element, such as hydrogen gas (H2), a compound, such as carbon dioxide (CO2), or a mixture of several gases, such as air.

A gas is a sample of matter that conforms to the shape of a container in which it is held and acquires a uniform density inside the container, even in the presence of gravity and regardless of the amount of substance in the container.

By evaluating the four major gases you're searching for—oxygen (O2), carbon monoxide (CO), hydrogen sulphide (H2S), and methane (CH4)—a 4 gas monitor can help you protect your employees in any setting.

Natural gas is an odorless, gaseous mixture of hydrocarbons—predominantly made up of methane (CH4).

In a gas when Volume increase Temperature decreases.

To learn more about Gas refer to:

https://brainly.com/question/25736513

#SPJ13

Elodea leaves will extract CO2 from water and make glucose through photosynthesis when placed in a light environment with water. When CO2 dissolves in water, it combines with the water to produce carbonic acid (H2CO3) and acidify the water (pH 7).

Elodea are herbaceous perennials with whorls of two to seven dark green leaves grouped along the stem. Plants often generate seeds in ellipsoid or oval capsules and are dioecious (individuals only bear one type of flower, either male or female).

It is widely recommended for demonstrating oxygen formation during photosynthesis. Elodea is cheap and easy to grow. When the original pH of the water was low, Elodea had the potential to raise it, which led to more Cd accumulating in the water. The pH difference was more noticeable the more densely planted an area was. Since the pH rise was more noticeable in the absence of DCMU and in the dark, it cannot have been caused by photosynthetic activity. Cadmium was the cause of Elodea's pH increase.

for more information about elodea,visit-

https://brainly.com/question/14368932

#SPJ4

Answer:

-A positively charged nucleus is surrounded by one

or more negatively charged electrons.

The IUPAC terminology is based on the longest chain of carbons connected by a single bond, whether it be a continuous chain or a ring.

All deviations, whether multiple bonds or atoms other than carbon and hydrogen, are identified by prefixes or suffixes in accordance with a particular set of priorities.

A functional group's naming IUPAC

To assist you in identifying the compound, the carbon atoms have been given numbers.

An organic compound's systematic IUPAC name has four components.

To know more about IUPAC(1984) and Bohr(1920) schemes, click on the link below:

https://brainly.com/question/12744396

#SPJ9

The moles of ions present in the solution when a solution is prepared by dissolving 0.69 mol of mgcl2 in 0.40 kg of water is 2.0 moles.

0.69 moles of MgCl2 in 0.4 kg water

MgCl2 disassociates as Mg2+ + 2Cl-

So 1 MgCl2 from 3 moles

Moles of ion present is 3x0.69=2.0 moles

To learn more about significant figures visit:

brainly.com/question/17396594

#SPJ4

In contrast to an inhibitory transmitter, an excitatory transmitter encourages the development of an electrical signal known as an action potential in the receiving neuron.

Depolarization is brought on by excitatory neurotransmitters (decrease in membrane potential). Hyperpolarization is brought on by inhibitory neurotransmitters (increase in membrane potential).

Neurotransmitters fall into two categories: excitatory and inhibitory. While inhibitory neurotransmitters work to stop an action potential, excitatory neurotransmitters function to activate receptors on the postsynaptic membrane and enhance the effects of the action potential.

While inhibitory neurons release neurotransmitters that prevent action potential firing, excitatory neurons release neurotransmitters that cause an action potential to occur in the postsynaptic neuron.

Let's know more about Excitatory & Inhibitory

https://brainly.com/question/13021637

Oxygen forms two bonds and the configuration is 1s₂ 2s₂ 2p₄, Phosphorus forms three bonds and the configuration is [Ne]3s₂ 3p₃, Gallium forms four bonds and the configuration is [Ar] 3d₁₀ 4s₂ 4p₁

To learn more about VBT, refer

brainly.com/question/11625586

#SPJ4