We can determine how long it takes for anything to spin through a specific angular displacement by looking at its average angular velocity. The instantaneous angular velocity provides us with information about the rate of rotation of an object. Thus, option C is correct.
What role of Angular velocity in wheel transmission?The angular velocity of a wheel, for instance, is 120 radians per minute if it rotates 60 times in a minute.
A pair of wheels must always move at the same linear speed, regardless of the wheel transmission.
Angular velocity is equal to linear velocity divided by the circumference of the wheel (2×radius).
Radius (Y) / Radius = Angular Velocity (X) / Angular Velocity (Y) (X)
Therefore, : c/w faster The angular velocity of Y is greater than X because its radius is less than X's.
Learn more about Angular velocity here:
https://brainly.com/question/29557272
#SPJ1
The frames of ranges, wall-mounted ovens, counter-mounted cooking units, and clothes dryers under the conditions permitted for existing installations, ___ permitted to be connected to the grounded circuit conductor.
Select one:
a. shall not be
b. can not
c. may be
d. shall be
The correct answer is a. shall not be permitted to be connected to the grounded circuit conductor.
It is forbidden to utilise a building or structure's structural metal frame as a conductor for equipment grounding. One of the following may be the conductor for the common grounding electrode: a conductor with a wire diameter of no less than 250 kcmil or 3/0 AWG for aluminium. Permanently wired use equipment and receptacles must be grounded using an equipment grounding conductor that is routed along with the circuit wires and linked to an equipment grounding bus in the branch-circuit panelboard that is clearly marked "Technical Equipment Ground." In patient care facilities, the equipment grounding conductor must be readily identifiable along its entire length by green insulation with one or more yellow stripes that link to the equipment grounding terminals of isolated ground receptacles.
To learn more about circuit click the link below:
brainly.com/question/27206933
#SPJ4
In using the bolt cutter shown, a worker applies two 300-N forces to the handles. Determine the magnitude of the forces exerted by the cutter on the bolt.
The bolt cutter is exerting a force of -600 N on the bolt. The negative sign indicates that the direction of this force is opposite to that of the forces applied to the handles.
To determine the magnitude of the forces exerted by the bolt cutter on the bolt, we need to use the principle of static equilibrium. This principle states that the sum of the forces acting on an object must be zero in order for the object to be in static equilibrium.
In this case, the forces acting on the bolt are the two 300 N forces applied to the handles of the bolt cutter, and the force exerted by the bolt cutter on the bolt. Let's call this force F. We can represent this situation with the following equation:
F + 2(300 N) = 0
Solving for F, we get:
F = -600 N
Learn more about static equilibrium, here https://brainly.com/question/29316883
#SPJ4
if you apply (taking dot product) a 4 x 4 x 3 filter to an image of 32 x 32 x 3. how many float operations (excludes adding the bias term) would be needed to compute one node of the next layer?
The float operation that needed to compute one node of the next layer is 4x4x3x2.
How to calculate float operation needed?One node of the next layer can be compute by performing dot product between the patch of image and the filter which is 4x4x3. So, the value is 48.
That means we multiply 48 term to obtain the dot product or we already done 48 float operation. But, this result is not precise.
The result is not precise because the first 48 is for a multiplication, after the multiplication we get 48 value. So, we need to add that to get the value of node which is 48+48 then result is 4x4x3x2 or equal to 32x3.
Learn more about float operation here:
brainly.com/question/22237704
#SPJ4
with a one-key encryption standard, both the sender and the receiver need to know the key that is used to scramble the transmitted or stored data. True or False
Symmetric encryption, commonly referred to as pre-shared key encryption, encrypts and decrypts data using the same key. The sender and the recipient must share the same key in order to communicate.Thus, it is true.
What best define about one-key encryption standard?With a one-key encryption standard, the key that is used to encrypt the transmitted or stored data must be known by both the sender and the recipient. The Sarbanes-Oxley Act was passed in part to protect the integrity of IT infrastructure being used by organizations.
Therefore, it is true that one-key encryption standard, both the sender and the receiver need to know the key that is used to scramble the transmitted or stored data.
Learn more about encryption here:
https://brainly.com/question/28100163
#SPJ1
technician a says information from the wheel speed sensors is available to other control modules on the can network. technician b says wheel speed sensors are ac generator-type sensors. who is correct?
The both technician is correct to their statement about wheel speed sensors.
What is wheel speed sensors?Wheel speed sensors is a tool to measure the vehicle's wheel rotation speed, it is a part of tachometer type. The wheel speed sensors is magnetic and generate ac signal.
CAN network or controller area network is purposed to networking intelligent devices with system of high-integrity serial bus. CAN network can be find usually in automotive components and industrial system.
Since, CAN network is to networking intelligent devices with serial bus, it can provide information from wheel speed to other control modules.
Learn more about wheel speed sensors here:
brainly.com/question/29306943
#SPJ4
technician a says that the multimeter is connected in series with the circuit or component to measure the voltage dropped by the circuit resistance. technician b says that the ohmmeter works well in testing semiconductors. who is correct?
The multimeter is linked in series with the circuit or component to measure the voltage dropped by the circuit resistance, which technician an is accurate to state is the case.
When a multimeter is linked in series with an electrical circuit, what may be measured?A multimeter needs to be connected in series with a circuit in order to measure current. See the example below. Placing the dial of the meter at the highest current range (or the 10A range if the probe is in the 10A socket).
How can the resistance of a resistor be measured using a digital multimeter?Select any resistor at random, and then set the multimeter to the 20k preset. Next, apply the same pressure you would use to push a key on a keyboard to the probes against the resistor legs. One of three values—0.00, 1, or the actual resistor value—will be displayed by the meter.
To know more about multimeter visit:-
https://brainly.com/question/29442319
#SPJ1
two gears with a 1:1 ratio and two inches apart on center to center on shafts, what size gears are needed?
What a penny farthing possesses is a 1:1 gear ratio.
What worries about a gear ratio of 1:1?STI shifters, drop bars, and some low gears will all be on my planned randonneur-style bicycle. The cassette might be a typical Shimano 105 11-32, and the crankset may be a "compact plus" (from Sugino, I assume).In this configuration, 28/28 = 1 would be the second-lowest gear ratio.On the entire back wheel, from the cassette to the spokes, I can see how this may add a special mechanical strain. On the other hand, since it isn't the lowest gear, I most likely won't use it for more than a few minutes at a time. Revision: Picture a biker standing and pushing up a steep route while leaning to one side. The rear wheel will always bend in the same manner as long as the 1:1 gear is engaged.To Learn more About gear ratio refer to:
https://brainly.com/question/14455728
#SPJ4
In the homogeneous decomposition of nitrous oxide N20 to form nitrogen and oxygen, it is found that at constant temperature the time needed for half the reaction to be completed (T1/2) is inversely proportional to the initial pressure (po) of N2O. On varying the temperature the following results were obtained. Temperature/K967 Po/Torr T1/2 Is 1030 360 212 1085 345 53 294 1520 You should note that 1 atm 760 Torr = 101.325 kPa, and you may assume that N2O behaves as an ideal gas. Deduce the reaction order and calculate: the rate constant k for the reaction at 967 K expressed in units of dm3mol's The mole fraction of nitrogen in the reaction mixture at time t1/2. (ii)
The reaction order can be determined by plotting the inverse of the pressure (1/po) versus the time (t1/2).
What is reaction?
Reaction is the process of responding to a stimulus or event. It is an essential component of the way living creatures interact with their environment and is often the basis of behavior.
Reaction can be physical, such as a reflex action, or mental, such as an emotional response. Simple reflexes include the eye blink, knee je rk, and breathing. More complex reactions may include fear, joy, or even anger. Reactions to stimuli can be conditioned or instinctual, and can be learned or unlearned.
This should produce a curve with a slope that is equal to the reaction order.
The rate constant k for the reaction at 967 K can then be calculated from the equation:
k = po/t1/2
Using the given data, the rate constant k for the reaction at 967 K can be calculated as:
k = 360/212 = 1.70 dm3mol-1s-1
The mole fraction of nitrogen in the reaction mixture at time t1/2 can be calculated by using the equation:
XN2 = 1/2[1/k(p)t+1]
Using the given data, the mole fraction of nitrogen in the reaction mixture at time t1/2 can be calculated as:
XN2 = 1/2[1/1.70(1030)212+1] = 0.857
To learn more about reaction
https://brainly.com/question/29354598
#SJP4
What impact area are extremely dangerou due to the enitivity of the dud contained within their boundarie?
impact area are extremely dangerous due to the enitivity of the dud contained within their boundaries is high hazard.
What is high hazard?A region with a high risk of flooding that stretches from the coast to the interior limit of a primary frontal dune along an open coast, as well as any other region vulnerable to high-velocity wave action from storms or seismic sources.If a structure or area is used to store, produce, or process potentially explosive goods or materials, or goods or materials that are highly flammable or combustible and likely to burn extremely quickly, it must be assigned to the high hazard occupancy group.With a "injury and sickness rate less than the national private-industry average of 1.6 per 100 full-time workers," according to OSHA, a sector is considered low-hazard. Even those fields that are thought to be low-hazard industries are susceptible to work-related accidents.A source or circumstance that has the potential to cause harm to people or the environment, damage to property, or any combination of these is referred to as a hazard.
To learn more about high hazard refer to:
https://brainly.com/question/17483083
#SPJ4
a. a certain element has a phasor voltage of and current of the angular frequency is 500 rad/s. determine the nature and value of the element. b. repeat for and current of c. repeat for and current of
A)The element is a capacitor with a capacitance of 10F.
Since the phase angle between the voltage and current is 90 degrees, the element is a capacitor with a capacitance of
C = V/Iω
= 200∠30∘V / (4∠120∘A)(500 rad/s)
= 10∠−90∘F
= 10 F.
B) )The element is an inductor with an inductance(L) of 20 H.
Since the phase angle between the voltage and current is −90 degrees, the element is an inductor with an inductance of
L = V/Iω
= 40∠−45∘V / (4∠−135∘A)(500 rad/s)
= 20∠135∘H
= 20 H.
C) The element is a resistor with a resistance(R) of 1.75 Ω.
Since the phase angle between the voltage and current is 0 degrees, the element is a resistor with a resistance of
R = V/I
= 7∠45∘V / (4∠45∘A)
= 1.75 Ω.
For more questions like Capacitance click the link below:
https://brainly.com/question/14893729
#SPJ4
Complete question:
A) A certain element has a phasor voltage of V=200∠30∘V and current of I=4∠120∘A. The angular frequency is 500 rad/s. Determine the nature of the element.
Determine the value of the capacitance (C) .
Express your answer to three significant figures and include the appropriate units.
B) Repeat Part A for V=40∠−45∘V and current of I=4∠−135∘A.
Determine the value of the element( L) Industance.
Express your answer to three significant figures and include the appropriate units.
C) Repeat Part A for V=7∠45∘V and current of I=4∠45∘A.
Determine the value of the resistance .
Express your answer to three significant figures and include the appropriate units.
TRUE/FALSE. modern refrigerators, washing machines, and other appliances are controlled by integrated circuits called that combine sensors with processing circuitry.
Modern refrigerators, washing machines, and other appliances are controlled by integrated circuits called Microcontrollers that combine sensors with processing circuitry. [TRUE]
The microcontroller in the equipment functions as control and automation of machines and processes.
What is MicrocontrollerA microcontroller (sometimes abbreviated as µC, UC or MCU) is a small computer on a single integrated circuit that contains a processor core, memory, and programmable input/output peripherals. Program memory in the form of NOR flash or OTP ROM is also often included on the chip, as well as a small amount usually of RAM. Microcontrollers are designed for embedded applications, in contrast to microprocessors used in personal computers or other general purpose applications.
Microcontrollers are used in automatically controlled products and devices, such as automobile engine control systems, implanted medical devices, remote controls, office machines, appliances, power tools, toys and other embedded systems. By reducing size and cost compared to designs that use separate microprocessor devices, memory, and input/output devices, microcontrollers make it economical to digitally control even more devices and processes.
Some microcontrollers can use 4-bit words and operate at clock rates as low as 4 kHz, for low power consumption (single-digit milliwatts or microwatts).
So, we can draw a conclusion that the small core or brain of a computer's work, which is programmed according to the wishes of the programmer, and its use is to make it easier to work so it works automatically without user intervention.
Learn more about microcontroller at https://brainly.com/question/20116168.
#SPJ4
FILL IN THE BLANK pigment names are often derived from their source. for example the pigment that we call umber is named after________ question 1 options: a zinc extraction process the stone lapis lazuli the brown soil of umbria, italy the red soil of afghanistan none of the other answers
The correct option is c. Umbria, Italy. Pigment names are often derived from their source. For example the pigment that we call umber is named after Umbria, Italy.
A coloured substance that is entirely or almost entirely insoluble in water is called a pigment. Contrarily, dyes are usually soluble, at least initially, during their use. In general, pigments are frequently inorganic substances while dyes are frequently organic molecules. Umbers, ochres, and siennas are examples of naturally occurring inorganic pigments since they are extracted from the earth. The same names of pigments are also made synthetically. Titanium white, cobalt blue, and cadmium yellow/orange/red are more examples of manufactured inorganic pigments. Materials are given colour by adding pigments, which are chemicals. Through art, fashion, computer displays, and even health, this seemingly straightforward application has influenced how we see the world. Paints, inks, plastics, textiles, cosmetics, and food all include pigments.
Learn more about Pigment here
https://brainly.com/question/1056549
#SPJ4
Pigment names are often derived from their source. For example the pigment that we call umber is named after ______.
a. a zinc extraction process
b. the stone lapis lazuli
c. Umbria, Italy
d. Afghanistan
e. none of these
Darwin has purchased a laptop for the purpose of running his stock brokerage activities from home. He has contracted Navin, a network engineer, to install a software specifically for his workstation so that the software can protect the network from certain traffic. Analyze which of the following firewalls is best applicable in this scenario.
a. A host-based firewall
b. An HIDS
c. A network-based firewall
d. A proxy server
Answer:
d. A proxy server d. A proxy serverd. A proxy server
Explanation:
d. A proxy server
what ancient civilization is most associated with innovations in plumbing and sewage systems?
nickel additions to low-carbon steel increase the ductile-to-brittle transition temperature to very high temperatures.
According to this finding, low-carbon steels with grain sizes of 6.3 mm or more show complete brittle fracture even at 196 °C, while those with grain sizes of 4.3 mm or less show complete ductile fracture.
A notched bar is broken in a pendulum-style impact tester to determine the ductile/brittle transition temperature for every specific steel sample. The energy absorbed during the fracture is then calculated. Steel 1045 specimens break apart when the temperature drops below zero and display brittle-like fracture (specimens 1 to 4 from -200oC to 0.0oC), however when the temperature rises, the specimens display ductile-like fracture (specimens 5 to 7 from 24oC to 100oC). Mild steel is malleable and ductile because it contains between 0.05 and 0.30 percent carbon. This steel has low carbon, with a carbon concentration of about 0.3%, making it neither overly brittle nor overly ductile. It is utilized practically everywhere since it is in the middle, which strikes a good balance.
Learn more about brittle here
https://brainly.com/question/29860308
#SPJ4
Assuming x is 5, y is 6, and z is 8, which of the following is false?
1. x == 5;
2. 7
3. z < = 4;
4. (1 + x) != y;
5. z >= 8;
6. x >= 0;
7. x
Select one:
a. 3 and 4 are false.
b. 3, 4, 6, 7 are false.
c. Only 5 is false.
d. All are false.
e. None of these
d. All are false.
Explanation:
It seems option d. all are false.
When does congestion collapse happen and how congestion collapse is handled at the transport layer?
TCP congestion control, which is utilized at the transport layer, is a well-known and often used close-loop control method. By adjusting the window size, which designates the number of unacknowledged packets permitted by the source process, control alters the transmission rate dynamically.
The additive increase/multiplicative decrease (AIMD) scheme is one of several techniques used by the Transmission Control Protocol (TCP) to minimize network congestion. Other schemes used by TCP include the delayed start and congestion window (CWND) schemes. The TCP congestion-avoidance algorithm serves as the cornerstone of Internet congestion management. According to the end-to-end approach, internet hosts, not the network itself, are primarily responsible for congestion control. The method is implemented in many forms and versions in the operating systems' protocol stacks of computers that connect to the Internet. TCP employs a multifaceted congestion-control method to prevent congestive breakdown. The total number of unacknowledged packets that can be in transit end-to-end is constrained by the CWND that TCP maintains for each connection. This is comparable to the sliding window flow control method employed by TCP.
Learn more about TCP congestion control here
https://brainly.com/question/18914242
#SPJ4
fill in the blank: a formula is a set of instructions used to perform a specified calculation; whereas a function is_____
A formula is defined as a set of instructions used to perform a particular calculation; whereas a function is a predefined operation.
In the context of the Excel sheet, a formula refers to a statement that performs a specified calculation. On the other hand, a function is a type of formula which is predefined. It is permitted to perform any type of operation with a formula as per need to calculate a value. In the case of a function, customization is not allowed; the function only performs a pre-existent operation.
Thus, the formula is defined to be a set of instructions to be used to perform any specified calculation; while a function refers to a predefined operation.
You can learn more about function and formula at
https://brainly.com/question/27927845
#SPJ4
while erp systems offer many competitive advantages to users, particularly those in upper management, a significant disadvantage is their
ERP software's high prices, complexity, lengthy deployment, and data migration are some of its main drawbacks. Purchasing a P2P solution with ERP system integration is the ideal option if you want your procurement process to be as effective as possible.
What is ERP ?Accounting, purchasing, project management, risk management and compliance, and supply chain management are just a few of the everyday business tasks that are managed by firms using enterprise resource planning (ERP) software.ERP systems can operate with a variety of deployment model options and fall into one of three primary categories. The three types of ERP systems that are most frequently used are hybrid, on-premise, and cloud-based.By automating tasks and minimizing human labor, an ERP system is designed to increase the effectiveness of all company activities.Users can automate laborious daily chores with the help of ERP packages like Netsuite, SYSPRO, and Epicor. Rather of wasting time each day on routine tasks or obtaining reports from many systemsTo learn about erp refer to:
brainly.com/question/15685153
#SPJ1
technician a says a faulty unlock relay could cause the power door locks to lock but not unlock the doors. technician b says a faulty actuator could cause this. who is correct?
According to the condition and information, technician A is correct and conveys that a faulty unlock relay could cause the power door locks to lock but not unlock the doors.
What is the Technician's responsibility?The technician's responsibility may be characterized as those features that include monitoring and servicing systems, diagnosing problems and troubleshooting equipment, running tests and completing reports, updating and improving existing systems, and repairing or replacing faulty equipment.
According to the context of this question, technicians install, troubleshoot, and fix the hardware and software in a computer system. With respect to the same ideology, the recommendation of technician A seems more accurate as compared to that of technician B.
Therefore, technician A is correct and conveys that a faulty unlock relay could cause the power door locks to lock but not unlock the doors.
To learn more about Technicians, refer to the link:
https://brainly.com/question/18428188
#SPJ1
FILL IN THE BLANK. The amplitude of the sinusoidal symmetrical ac component of the three-phase short-circuit current of an unloaded synchronous machine decreases from a high initial value to a lower steady-state value, going through the stages of _____ and _____ periods.
An unloaded synchronous machine's three-phase short-circuit current undergoes a series of sub transient and transient episodes as the amplitude of the sinusoidal symmetrical ac component decreases from a high beginning value to a lower steady-state value.
First off, the term "subtransient" describes how quickly this quantity changes—faster than even "transient" itself. Technically speaking, the subtransient time period lasts from 16.7 milliseconds to 50 milliseconds, or around one to three cycles (assuming a power frequency of 60 Hz). There are three time periods: During the sub-transient period, the AC current is very big and falls quickly after the fault; during the transient period, the current falls more slowly; and during the steady-state period, the current reaches its steady value. In the computation of fault current, transient and sub-transient reactance are often the words that are used. Subtransient reactance, which is generally represented by the symbol X"d, is the reactance that is used to estimate the current during the first cycle after the occurrence of the fault.
Learn more about Sub transient here
https://brainly.com/question/15099024
#SPJ4
if the 240- lb block is released from rest when the spring is unstretched, determine the velocity of the block after it has
The velocity of the block use this equation.
[tex]v = \sqrt{(\frac{2PE_{initial}- 2PE_{spring}}{m} }[/tex]
[tex]v= \sqrt{\frac{238304 lbft - 2*(\frac{1}{2} )k(5 ft)^2}{240 lb} }[/tex]
Potential energy is the energy possessed by an object because of its Write the symbol of sqrt in proper symbol. Write the exponent part in proper superscript or other terms in proper subscript. The entire solution is not clear and hard to understand. Give clear and step by step calculation.ergy is often associated with the forces acting on an object, such as the gravitational force or the elastic force in a spring.
To solve this problem, we need to apply the principles of conservation of energy.
The initial potential energy of the block is given by:
PEₐ = mgh = (240 lb)(32.2 [tex]\frac{ft}{s^2}[/tex])(5 ft) = 38304 lb.ft
The final kinetic energy of the block is given by:
KEₓ = 1/2 * m * [tex]v^2[/tex]
The total energy of the system is conserved, so the initial potential energy of the block must equal the final kinetic energy of the block plus the potential energy of the spring:
PEₐ= KEₓ + [tex]PE_{spring}[/tex]
The potential energy of the spring is given by:
[tex]PE_{spring}[/tex] = 1/2 * k * [tex]x^2[/tex]
where k is the spring constant and x is the displacement of the spring from its equilibrium position. The displacement of the spring is equal to the distance the block has traveled, which is 5 ft.
Substituting these expressions into the equation for conservation of energy and solving for the velocity of the block gives:
[tex]v = \sqrt{(\frac{2PE_{initial}- 2PE_{spring}}{m} }[/tex]
[tex]v= \sqrt{\frac{238304 lbft - 2*(\frac{1}{2} )k(5 ft)^2}{240 lb} }[/tex]
Since the weight of the drum and the radius of gyration are not needed to solve this problem, we can ignore them.
To find the velocity of the block, we need to know the value of the spring constant k. Without this information, it is not possible to determine the velocity of the block
The missing part in the question is shown below.
If the 240-lb block is released from rest when the spring is unstretched; determine the velocity of the block after it has descended 5 ft The drum has & weight of 70 Ib and a radius of (gyration of ko 0.5 ft about its center of mass 0. Express your answer to three significant fligures and include the appropriate units.
Learn more about potential energy, here https://brainly.com/question/24284560
#SPJ4
x=5 and y=x++, find the value of y?
A brother and sister are playing in the woods, when suddenly the brother realizes that they are separated. The last place he remembers seeing his sister is at a particularly large tree. The brother traveled d1=22.5 m at ?1=20.0? from the tree then turned and traveled d2=12.0 m at ?2=130?. Meanwhile, the sister traveled d3=19.0 m at an angle of ?3=?117? from the tree. The angles are given with respect to east with counterclockwise being defined as positive
Distance between brother and sister is distance between (13.42963 , 16.88798)and (-8.62581 , 16.92912) = 22.05547 m
According to problem ,
initially assume both are at origin .
brother moved 22.5m at an angle of 20degrees. so now he is at (22.5cos20 , 22.5sin20).
later he moved 12m at 130 degrees to tree. so now he is at (22.5cos20+12cos130 , 22.5sin20+12sin130)= (21.14308-7.71345 , 7.69545+9.19253) =(13.42963 , 16.88798)
sister moved 19m at 117 degrees. she is at (19cos117 , 19sin 117)=(-8.62581,16.92912)
distance between brother and sister is distance between (13.42963 , 16.88798)and (-8.62581 , 16.92912) = 22.05547 m
The distance between two points in a plane is the length of the line segment separating the two locations. Typically, the equation d=((x2 - x1)2 + (y2 - y1)2) is used to calculate the distance between two locations.
Learn more about Distance here:
https://brainly.com/question/1429636
#SPJ4
Many newer cars do not carry the current for the headlights and use a ________ (MUX) switching signal.
Many more automobiles have an analogue (MUX) switching signal instead of carrying the electricity for the headlights.
What exactly is an automobile?Automobiles, sometimes referred to as sports cars just cars, are mainly four-wheeled transportation vehicles. combustion engines that consume volatile fuels are typically used to power them.
What is an example of a car?There are a wide range of autos, including cars, buses, trucks, motorcycles, etc. An automobile, such as a car, a bus, a truck, etc., is a soul vehicle that utilizes a fusion reactor for propulsion and that is used to transport people and things over land.
To know more about the Automobile visit :
https://brainly.com/question/28992824
#SPJ1
define electrical engineering?
Answer:
Electrical engineering is an engineering discipline concerned with the study, design, and application of equipment, devices, and systems which use electricity, electronics, and electromagnetism. It emerged as an identifiable occupation in the latter half of the 19th century after commercialization of the electric telegraph, the telephone, and electrical power generation, distribution, and use.
Explanation:
A load P is supported by a structure consisting of rigid bar ABC, two identical solid aluminum alloy [E = 73 GPa] rods (1), and a solid bronze [E = 105 GPa] rod (2), as shown in Figure P5.23. The aluminum rods (1) each have a diameter of 12 mm and a length of L_1 = 2.3 m. They are symmetrically positioned relative to middle rod (2) and the applied load P. Bronze rod (2) has a diameter of 18 mm and a length of L_2 = 1.6 m. If all bars are unstressed before the load P is applied, determine the normal stresses in the aluminum and bronze rods after a load of P = 50 kN is applied to the rigid bar.
In machining, welding, and structural applications, aluminum bars, rods, and discs are utilized to create and build parts because they are strong, lightweight, and corrosion-resistant.
These days, engine manufacturers are attempting to maintain the excess mass at the bottom of the rod and remove more weight from the piston; for this reason, an aluminum rod is advantageous. They are nonetheless stronger for their weight than steel rods since there is a lot more substance at the bottom, according to Antony. The well-known properties of aluminum make the process of bending it quite simple. Aluminum is a soft, ductile, malleable, and light metal in its highest purity forms. These characteristics enable aluminum to be bent without running the risk of breaking or developing fractures. A useful metal that is lightweight, corrosion-resistant, and simple to produce is the aluminum alloy rod.
To learn more about aluminum rods click the link below:
brainly.com/question/13862183
#SPJ4
a building foundation made up of a base of poured concrete where finished flooring is installed on top of the cured concrete is best described as
The supporting load-bearing components of the structure will rest on footings that make up a slab on grade foundation. Concrete slabs are poured for the remaining portion of the ground floor. The entire finished flooring is put in place immediately on top of the concrete slab.
Modern structures frequently use concrete slabs as structural support for their flat, horizontal surfaces. While thinner mud slabs may be used for outside paving, steel-reinforced slabs, typically between 100 and 500 mm thick, are most frequently utilized to construct floors and ceilings (see below). The ground floor of many residential and commercial buildings is constructed from a large concrete slab that is either supported by foundations or rests directly on the subsoil. These slabs are often categorized as suspended or ground-bearing. If a slab rests directly on the foundation, it is considered to be ground-bearing; otherwise, it is suspended. There are numerous typical slab designs for multi-story structures (see "Design" for more types): Applications for beam and block, also known as rib and block, are mostly found in residential and commercial settings. Pre-stressed beams and hollow blocks make up this sort of slab, which is temporarily supported until it sets, usually after 21 days. A precast hollow core slab that is crane-installed on the job site. Thinner, pre-cast concrete slabs are strung between the steel frames of high rise buildings and skyscrapers to create the floors and ceilings on each level. Along with homes, high rise structures and sizable shopping centres also use cast in-situ slabs. Shutters and reinforced steel are used to cast these in-situ slabs on the spot.
Learn more about Concrete slabs here
https://brainly.com/question/23421328
#SPJ4
the advantage of routine patch cycles is that they allow for thorough review of the patch and testing cycles before deployment.
The benefit of having routine patch cycles is that they enable a thorough review of the patch and testing cycles before deployment. Thus, this is said to be a true statement.
The patch cycle is the mechanism of distributing and applying updates to software and application. These patches are often important to correct errors or bugs in the software. It is considered a good practice that patches should be applied every thirty days from their release. The advantage of having routine patch cycles is that they enable a thorough review of the patch and testing cycles before the deployment of the software. Therefore, the given statement reflects to be true.
"
Complete question is:
the advantage of routine patch cycles is that they allow for thorough review of the patch and testing cycles before deployment.
True
False
"
You can learn more about patch at
https://brainly.com/question/1090549
#SPJ4
When connecting a multiwire (3-wire) circuit to a single phase panel, one ungrounded conductor must be connected to the ____ phase and the other ungrounded conductor must be connected to the ____ phase.
The correct answer is multiwire branch circuit phase and the other ungrounded conductor must be connected .
According to NEC Article 100, a multiwire branch circuit is made up of two or more ungrounded conductors with a voltage between them and a grounded conductor connected to the neutral or grounded conductor of the system. This grounded conductor has an equal voltage between it and each ungrounded conductor in the circuit. Two 120V parallel circuits become one 240V series circuit if the grounded (neutral) line is opened. A connection that has many circuits using the same neutral is known as a shared neutral. The circuits and neutral together are frequently referred to as an Edison circuit. This is also known as a common neutral.
To learn more about multiwire branch circuit click the link below:
brainly.com/question/29081366
#SPJ4