if c(x)=3000 10x−.05x2 then find the marginal average cost function c′ave(x)

a) At least 5,675 adults.

b) if we use the results from the 2014 survey, we still need to survey at least 5,675 adults.

c) It does not have much of an effect on the sample size.

Sample size refers to the number of observations or participants included in a study or survey. In statistical analysis, the size of the sample is an important consideration as it can affect the accuracy and reliability of the results. A larger sample size generally leads to more precise estimates and increased statistical power, while a smaller sample size may be more susceptible to sampling errors and variability.

(a) To find the minimum sample size needed, we can use the formula:

n = (z² × p × (1-p)) / E²

where z is the z-score corresponding to the desired confidence level (99%), p is the estimated proportion of e-cigarette users (3.65% or 0.0365), and E is the desired margin of error (3 percentage points or 0.03).

Plugging in these values, we get:

n = (2.576² × 0.0365 × 0.9635) / 0.03²

n = 5,674.85

Rounding up to the nearest integer, we get:

n = 5,675

Therefore, we need to survey at least 5,675 adults to obtain today's e-cigarette usage rate with a 99% confidence level and a margin of error of 3 percentage points.

(b) If we use the results from the 2014 survey, we can estimate the population proportion of e-cigarette users as 0.0365. Using the same formula as above, we get:

n = (2.576² × 0.0365 × 0.9635) / 0.03²

n = 5,674.85

Rounding up to the nearest integer, we get:

n = 5,675

Therefore, even if we use the results from the 2014 survey, we still need to survey at least 5,675 adults to obtain today's e-cigarette usage rate with a 99% confidence level and a margin of error of 3 percentage points.

(c) The use of the results from the 2014 survey does not have much of an effect on the sample size. This is because the desired confidence level and margin of error are fixed, and the estimated proportion from the 2014 survey is relatively close to the true proportion (since e-cigarette use is still a relatively new phenomenon).

To know more about the sample size visit:

brainly.com/question/5974251

#SPJ1

The explicit formula for the nth term of the sequence 35, 44, 53, ... is given by [tex]a_n = 26 + 9n[/tex].

To find the explicit formula for the sequence 35, 44, 53, ..., we need to first determine the pattern or rule that generates each term of the sequence.

Notice that each term in the sequence is obtained by adding 9 to the previous term. Therefore, we can write the pattern as:

[tex]a_n = a_1 + (n-1)d[/tex]

Substituting the values into the formula, we get:

[tex]a_n = 35 + (n-1)9[/tex]

[tex]a_n = 26 + 9n[/tex]

Therefore, the explicit formula for the nth term of the sequence 35, 44, 53, ... is given by:[tex]a_n = 26 + 9n[/tex].

Learn more about explicit formulas here:

https://brainly.com/question/13877261

#SPJ1

In an LRC circuit problem, the term "C" stands for capacitance (option b).

An LRC circuit consists of three primary components: an inductor (L), a resistor (R), and a capacitor (C). These components are connected in series, and the circuit allows the analysis of the behavior of electrical energy in the presence of these components.

The inductor (L) stores energy in the form of a magnetic field when current flows through it, while the resistor (R) dissipates energy in the form of heat as the current passes through it. The capacitor (C), on the other hand, stores energy in the form of an electric field as it holds a charge across its plates.

Capacitance is a measure of a capacitor's ability to store electrical energy per unit voltage. It is typically measured in farads (F). The capacitance of a capacitor is dependent on its physical properties, such as the surface area of its plates, the distance between the plates, and the dielectric material between the plates.

In an LRC circuit, the interplay of the inductor, resistor, and capacitor components creates a complex electrical behavior that depends on the circuit's characteristics and the applied voltage or current. The analysis of LRC circuits typically involves solving differential equations that describe the relationships between voltage, current, and the properties of the components.

In summary, the term "C" in an LRC circuit problem represents capacitance, which is a measure of a capacitor's ability to store electrical energy per unit voltage. The LRC circuit's behavior results from the combined action of the inductor, resistor, and capacitor components.

To know more about LRC circuit, refer here:

https://brainly.com/question/29045377

#SPJ11

Answer:

the first one

Step-by-step explanation:

the first one is correct

Answer:

the first one

Step-by-step explanation:

the first one is correct

The angle IHJ of the circle H is found to be 216 degrees where the value of HI is 10.

Let's denote the angle IHJ as θ. The area of a sector with angle θ in a circle with radius r is given by (θ/360)πr². Thus, we can write,

(θ/360)π(10)² = 40π

Simplifying this equation, we get,

θ = (40/25)360

θ = 576 degrees

Note that this angle is greater than 360 degrees, which means it's equivalent to a smaller angle that lies within one full revolution of the circle. To find this smaller angle, we can subtract 360 degrees from 576,

θ = 576 - 360

θ = 216 degrees

Therefore, the angle IHJ is 216 degrees.

To know more about angle in a circle, visit,

https://brainly.com/question/31858078

#SPJ1

Complete question - In circle H, HI=10 and the area of shaded sector = 40π . Find angle IHJ, where I and J are two point on the circle.

A) ) To compute f '(a) algebraically, we need to find the derivative of f(x) and then evaluate it at x = a.

f '(-5) = -6
b) [tex]f '(x) = 8x^3 + 6x^2 - 0\\So, f '(x) = 8x^3 + 6x^2[/tex]
c) the derivative of y with respect to x is 0.
dy/dx = 0
d) To find the derivative of f(x), we apply the power rule and chain rule.  [tex]f '(x) = 3/x^{0.5} + 3/x^{1.5}[/tex]

A) To compute f '(a) algebraically, we need to find the derivative of f(x) and then evaluate it at x = a.
f(x) = −6x + 7
f '(x) = -6 (by power rule for derivatives)
f '(-5) = -6

B) To use the shortcut rules to mentally calculate the derivative of f(x), we apply the power rule and constant multiple rule.
[tex]f(x) = 2x^4 + 2x^3 - 2\\f '(x) = 8x^3 + 6x^2[/tex]
(Note that the derivative of a constant is 0.)
[tex]f '(x) = 8x^3 + 6x^2 - 0\\So, f '(x) = 8x^3 + 6x^2[/tex]

C) To obtain the derivative dy/dx, we need to recognize that y is a constant function (always equal to 13). Therefore, the derivative of y with respect to x is 0.
dy/dx = 0

D) To find the derivative of f(x), we apply the power rule and chain rule.
[tex]f(x) = 6x^{0.5} + 3x^{-0.5}\\f '(x) = 3x^{-0.5} + (6)(0.5)x^{(-0.5-1)}\\f '(x) = 3x^{-0.5} + 3x^{(-1.5)}[/tex]
(Note that we simplified the second term using negative exponent rules.)
So, [tex]f '(x) = 3/x^{0.5} + 3/x^{1.5}[/tex]

learn more about derivative

https://brainly.com/question/30365299

#SPJ11

Mr. Chen's statement is incorrect because 5 hundreds - 3 hundreds does not equal 2 hundreds. 5 hundreds - 3 hundreds equals 2 hundreds and eighty, which is 288. Therefore, Mr. Chen needs a total of 512 - 384 = 128 grams of loose green tea.

The set of strings that satisfy the condition "l= ω∈0, 1* | ω has exactly one pair of consecutive zeros" can be constructed by considering all possible positions of the consecutive zeros and constructing the rest of the string accordingly.

The term "l= ω∈0, 1*" means that we are considering all strings (ω) made up of 0's and 1's of length "l" where "l" is unknown but can be any positive integer. The "|" symbol indicates a condition that must be satisfied by the string. In this case, we are looking for strings that have exactly one pair of consecutive zeros.

To find such strings, we can start by considering the possible positions of the consecutive zeros. They could appear in the first two positions, the last two positions, or somewhere in between.

If the consecutive zeros appear in the first two positions, then the rest of the string can be any combination of 0's and 1's. Similarly, if the consecutive zeros appear in the last two positions, then the rest of the string can also be any combination of 0's and 1's.

However, if the consecutive zeros appear somewhere in between, then the rest of the string must be carefully constructed to ensure that no additional pairs of consecutive zeros appear. For example, if the consecutive zeros appear in the third and fourth positions, then the rest of the string must contain only one more zero and the remaining digits must be 1's.

Therefore, the set of strings that satisfy the condition "l= ω∈0, 1* | ω has exactly one pair of consecutive zeros" can be constructed by considering all possible positions of the consecutive zeros and constructing the rest of the string accordingly.

To learn more about consecutive zeros here:

brainly.com/question/14962513#

#SPJ11

These calculations, it appears that the sequence of partial sums is convergent, as the values of Sn appear to approach a limit as n increases.

To calculate the sequence of partial sums, we need to add up the first n terms of the series for each n up to 8. The nth term of the series is given by:

an = 2n / (n^5 + 1)

Therefore, the sequence of partial sums is:

S1 = 2/2 = 1

S2 = 2/2 + 3/26 = 1.5874

S3 = 2/2 + 3/26 + 4/641 = 1.3867

S4 = 2/2 + 3/26 + 4/641 + 5/15626 = 1.2600

S5 = 2/2 + 3/26 + 4/641 + 5/15626 + 6/390625 = 1.7000

S6 = 2/2 + 3/26 + 4/641 + 5/15626 + 6/390625 + 7/9765626 = 1.1006

S7 = 2/2 + 3/26 + 4/641 + 5/15626 + 6/390625 + 7/9765626 + 8/244140626 = 1.0455

S8 = 2/2 + 3/26 + 4/641 + 5/15626 + 6/390625 + 7/9765626 + 8/244140626 + 9/6103515626 = 1.0127

From these calculations, it appears that the sequence of partial sums is convergent, as the values of Sn appear to approach a limit as n increases.

To learn more about sequence  visit:

https://brainly.com/question/30262438

#SPJ11

The sum of the series [infinity] an n = 1 whose partial sums are given by sn = 4 − 3(0.7)n is 4.

To find the sum of the series [infinity] an n = 1, we need to take the limit as n approaches infinity of the partial sum formula. In this case, we have:

sn = 4 − 3(0.7)n

Taking the limit as n approaches infinity, we get:

lim n→∞ sn = lim n→∞ (4 − 3(0.7)n)

Since 0.7^n approaches zero as n approaches infinity, we have:

lim n→∞ sn = 4 - 0 = 4

Therefore, the sum of the series [infinity] an n = 1 whose partial sums are given by sn = 4 − 3(0.7)n is 4.

Learn more about Series and Sequences

brainly.com/question/31463410

#SPJ11

For the given question, we get a total of 16 subsets that contain 13 and 5 but no other odd elements.

We need to first identify the odd elements in the set s, which are 1, 3, 5, and 7.

We are told that the subset we are looking for must contain 13 and 5, but no other odd elements.

This means that the subset can contain any of the even elements in the set s, which are 2, 4, 6, and 8, but cannot contain any of the old elements.

There are a few different ways to approach counting the number of such subsets, but one common method is to use the fact that each element in the original set s can either be included or excluded from the subset.

We can represent each subset as a binary string of length 8, where the ith digit is 1 if the ith element is included and 0 if it is excluded.

For example, the subset {2, 5, 6} can be represented by the binary string 01010110.

To count the number of subsets that contain 13 and 5 but no other odd elements, we can first fix the positions of these two elements in the binary string. Since we know they must be included, their digits will be 1.

The remaining 6 digits can each be either 0 or 1, representing whether the corresponding even elements are included or excluded.

However, since we cannot include any of the old elements, we must set their digits to 0.

Therefore, we have 4 even elements to choose from to include in the subset, and for each of these elements, we can either include it or exclude it.

This gives us 2^4 = 16 possible choices for the even elements.

Multiplying this by the number of ways to choose 13 and 5 (which is just 1 since they are fixed),

We get a total of 16 subsets that contain 13 and 5 but no other odd elements.

Learn more about subsets: https://brainly.com/question/13265691

#SPJ11

The maximum displacement current through the cross-sectional area is 1.77 A.

The maximum displacement current through a cross-sectional area can be found using the equation,

[tex]I =\ \in_0(d \phi_{E/dt} )[/tex]

where I is the displacement current, ε₀ is the electric constant [tex]8.85 \times 10^{-12} F/m[/tex], and [tex](d \phi_{E/dt} )[/tex] is the rate of change of the electric flux through the cross-sectional area.

The electric flux [tex]\phi_E[/tex] through a surface is given by:

[tex]\phi_E = \int E\times dA[/tex]

where E is the electric field and dA is the differential area vector.

For a uniform electric field perpendicular to the surface, the electric flux through the surface is simply:

[tex]\phi_E = E\times A[/tex]

where E is the magnitude of the electric field and A is the area of the surface.

In this case, the magnitude of the electric field is given by:

[tex]E = E_0\ Cos(\omega t)[/tex]

The maximum value of E is [tex]E_0 =20 V/m[/tex], which occurs when [tex]Cos(\omega t) =1[/tex]

The maximum electric flux through the cross-sectional area [tex]A = 0.60 m^2[/tex] is therefore:

[tex]\phi_E = E \times A = (20 V/m) \times (0.60 m^2) = 12 V[/tex]

To find the maximum displacement current, we need to differentiate the electric flux with respect to time:

[tex]d\phi_{E/dt} = -E_0\ \omega Sin(\omega t)[/tex]

The maximum value of sin(ωt) is 1, so the maximum value of [tex]d\phi_{E/dt}[/tex] is:

[tex]d\phi_{E/dt} = -E_0\ \omega Sin(\omega t) = -20V/m \times (1.0 \times 10^7 s^{-1}) \times 1 \\d\phi_{E/dt} = -2.0 \times 10^8 V/s[/tex]

Therefore, the maximum displacement current through the cross-sectional area is:

[tex]I =\ \in_0(d \phi_{E/dt} ) = (8.85 \times 10^{-12} F/m)\ \times (-2.0 \times 10^8 V/s) =-1.77A\\[/tex]

The negative sign indicates that the displacement current is flowing in the opposite direction to the electric field. However, the magnitude of the displacement current is always positive.

To know more about area, visit:

brainly.com/question/27683633

#SPJ1

The maximum displacement current through the cross-sectional area of this volume is approximately 1.06 milliamperes (mA), or 1.06 × 10⁻³A.

In mathematics, maximum displacement refers to the maximum deviation of a point or object from its equilibrium position, as it undergoes a displacement or vibration.

The maximum displacement current through a cross-sectional area A can be found using the equation:

I = ε₀ A (dE/dt)

where ε₀ is the permittivity of free space, A is the cross-sectional area, and dE/dt is the time rate of change of the electric field.

In this case, the electric field is given by E = E₀ cos(ωt), so we can find its time derivative as follows:

dE/dt = -E₀ω sin(ωt)

The maximum displacement current occurs when sin(ωt) is equal to 1, which corresponds to the maximum value of the time-varying electric field. At this point, the displacement current is:

I = ε₀ A (dE/dt) = ε₀ A (-E₀ω)

Substituting the given values, we get:

I = (8.85 × 10⁻¹²C²/Nm²)(0.60 m²)(-20 V/m)(1.0 × 10⁷ s⁻¹)

I ≈ -1.06 × 10⁻³ A

Note that the negative sign indicates that the displacement current is flowing in the opposite direction to the time-varying electric field.

To know more about cross-sectional area visit:

https://brainly.com/question/13029309

#SPJ1

-1/5n + 6/5, is not the correct formula for this sequence as it doesn't capture the alternating signs and the geometric nature of the sequence.

The pattern in the sequence is that each term is the previous term multiplied by -1/5. Therefore, we have:

a1 = 1
a2 = -1/5 * 1 = -1/5
a3 = -1/5 * (-1/5) = 1/25
a4 = -1/5 * (1/25) = -1/125

And so on. We can see that the denominator of each term is increasing by a factor of 5 each time, so the general formula for the nth term is:

an = (-1/5)^(n-1)

Now, if we substitute n = 1 into the formula you provided, we get:

an = -1/5(1) + 6/5 = 1

This is not equal to the first term in the sequence, which is 1. Therefore, your formula is not correct.
find the general term of the given sequence. The sequence you provided is:

\({1, -1/5, 1/25, -1/125, 1/625,...}\)

This sequence alternates between positive and negative terms and has a common ratio of -1/5. To find the general term, we can use the geometric sequence formula:

\(a_n = a_1 * r^{n-1}\)

where \(a_n\) is the general term, \(a_1\) is the first term, \(r\) is the common ratio, and \(n\) is the term number.

In this case, \(a_1 = 1\) and \(r = -1/5\). Plugging these values into the formula, we get:

\(a_n = 1 * (-1/5)^{n-1}\)

So, the formula for the general term of the sequence is:

\(a_n = (-1/5)^{n-1}\)

To learn more about denominator visit;

brainly.com/question/7067665

#SPJ11

The degree of the polynomial is 3

Algebraic expressions are defined as expressions that are made up of terms, variables, constants, factors and coefficients.

These expressions are also made up of mathematical operations, such as;

Polynomials are algebraic expressions with a degree that is greater than Note that the height exponent is the same as the degrees.

From the information given, we have;

C+cd² +6d³

Degree = 3

Learn more about algebraic expressions at: https://brainly.com/question/4344214

#SPJ1

By solving this double integral, we can determine the value of the constant C. Then, we have a complete description of the joint PDF for the given random variables X and Y.

The joint PDF of two random variables X and Y is given by fx,y (x, y) = C, where 0 < x < 9 and 0 < y < x. We need to find the value of the constant C. To do this, we can use the fact that the total probability over the region of interest must equal 1. Integrating the joint PDF over the region of interest gives: ∫∫ fx,y (x, y) dx dy = ∫0^9 ∫0^x C dy dx = C ∫0^9 x dx = C (1/2) (9^2) = 81C/2 Setting this equal to 1, we get: 81C/2 = 1 C = 2/81

Therefore, the joint PDF of X and Y is: fx,y (x, y) = (2/81), where 0 < x < 9 and 0 < y < x.The joint PDF of two random variables X and Y, denoted as fX,Y(x, y), represents the probability density function of both variables. In this case, fX,Y(x, y) = C, where C is a constant. The conditions given are 0 < x < 9 and 0 < y < x.To find the constant C, we need to satisfy the property that the total probability of the joint PDF should equal 1. To do this, we can integrate fX,Y(x, y) over the given range:∫∫fX,Y(x, y) dy dx = ∫(from 0 to 9) ∫(from 0 to x) C dy dx = 1

Learn more about variables here: brainly.com/question/2466865

#SPJ11

The relative minimum points are (-1/2, 1, -19/4) and no saddle points of the function f(x,y) = 7x² - 8y² + 7x + 16y + 8. The only critical point is (-1/2, 1).

To find the critical points of the function f(x,y) = 7x² - 8y² + 7x + 16y + 8, we need to solve the system of partial derivatives equal to zero:

f x = 14x + 7 = 0

f y = -16y + 16 = 0

Solving for x and y, we get:

x = -1/2

y = 1

So the only critical point is (-1/2, 1).

To classify the critical point, we need to calculate the second-order partial derivatives:

f xx = 14

f xy = 0

f yx = 0

f yy = -16

Using the Hessian matrix at the critical point is:

D = f xx f yy - f xy f yx = (14)(-16) - (0)(0) = -224

Since D < 0 and f xx > 0, we have a relative minimum at (-1/2, 1).

Since there is only one critical point, there are no saddle points.

Know more about critical point here:

https://brainly.com/question/31017064

#SPJ11

Answer:

Step-by-step explanation:

y=7

y=12

y=42

y=52

sub in x with values to find y

To find the length of a path between two points (3, 5) and (2, 5) over the interval 4 ≤ t ≤ 5, we need to understand what is happening within that interval. However, there's no mention of a function or curve that the points lie on.

Assuming that the path is a straight line between the two points, we can find the distance between them.

Step 1: Identify the coordinates of the two points. Point A: (3, 5) Point B: (2, 5)

Step 2: Use the distance formula to find the length of the path. Distance = √[(x2 - x1)^2 + (y2 - y1)^2]

Plugging in the coordinates: Distance = √[(2 - 3)^2 + (5 - 5)^2]

Distance = √[(-1)^2 + (0)^2] Distance = √[1 + 0] Distance = √1

Step 3: Calculate the result. Distance = 1 The length of the path between points (3, 5) and (2, 5) is 1 unit.

Learn more about Distance,

https://brainly.com/question/26046491

#SPJ11

To find the length of a path between two points (3, 5) and (2, 5) over the interval 4 ≤ t ≤ 5, we need to understand what is happening within that interval. However, there's no mention of a function or curve that the points lie on.

Assuming that the path is a straight line between the two points, we can find the distance between them.

Step 1: Identify the coordinates of the two points. Point A: (3, 5) Point B: (2, 5)

Step 2: Use the distance formula to find the length of the path. Distance = √[(x2 - x1)^2 + (y2 - y1)^2]

Plugging in the coordinates: Distance = √[(2 - 3)^2 + (5 - 5)^2]

Distance = √[(-1)^2 + (0)^2] Distance = √[1 + 0] Distance = √1

Step 3: Calculate the result. Distance = 1 The length of the path between points (3, 5) and (2, 5) is 1 unit.

Learn more about Distance,

https://brainly.com/question/26046491

#SPJ11

A value x with a z-score of 3.4 is an example of an outlier. An outlier is a data point that lies outside the overall pattern in a distribution.

A value that differs significantly from the other values in a data set is referred to as an outlier. In other words, outliers are values that deviate unusually from the mean.

Most of the time, outliers affect the mean but not the median or mode. As a result, the outliers' impact on the mean is crucial.

To find the outliers, there is no rule. However, if a value exceeds 1.5 times the value of the interquartile range outside of the quartiles, some books refer to it as an outlier.

In order to find the outliers, the data can also be plotted as a dot plot on a number line.

Visit here to learn more about  outlier : https://brainly.com/question/26958242
#SPJ11

Logical expression that is equivalent to: b. ∃y∀x(¬P(x)∨Q(x,y))

We should analyze each option and compare them to the original statement. The given statement is:

∃y∀x(¬P(x)∨Q(x,y))

Now let's analyze each option:

a. Not provided.
b. ∃y∀x(¬P(x)∨Q(x,y)): This expression is identical to the given statement, so it is equivalent.
c. ∀y∃x(¬P(x)∨¬Q(x,y)): This expression is not equivalent to the given statement because it uses ¬Q(x,y) instead of Q(x,y).
d. ∃x∀y(¬P(x)∨¬Q(x,y)): This expression swaps the order of quantifiers (∃ and ∀) and uses ¬Q(x,y) instead of Q(x,y), so it's not equivalent to the given statement.
e. ∀x∃y(¬P(x)∨¬Q(x,y)): This expression swaps the order of quantifiers (∃ and ∀) but it also has ¬Q(x,y) instead of Q(x,y), so it's not equivalent to the given statement.

After analyzing each option, we can conclude that the logical expression equivalent to the given statement is:

Your answer: b. ∃y∀x(¬P(x)∨Q(x,y))

Learn more about Logical expression.

brainly.com/question/30038488

#SPJ11

Based on the information given, we can determine that the equivalent Z score for someone who has completed 18 years of education is 1.3774. This indicates that the individual's education level is 1.3774 standard deviations above the mean.

To get the percentile rank for a score of 18 using the Frequencies procedure, we would need to know the complete distribution of the EDUC variable. However, assuming that the distribution is approximately normal, we can use the Z score we calculated earlier to estimate the percentile rank.
Using a standard normal table or calculator, we can find that a Z score of 1.3774 corresponds to a percentile rank of approximately 93.7. This means that an individual who has completed 18 years of education is at or above the 93.7th percentile in terms of education level compared to the rest of the population.

Learn more about percentile rank here, https://brainly.com/question/28839672

#SPJ11

There is a table and line plot which consists a group data of students with their measured the shoes lengths. The incorrect data point is equals to [tex]7 \frac{1}{2} [/tex] and it is Don's data point.

The line plot displays data frequencies along a number line. We have a data of a group of students measured the lengths of their shoes. The lengths are listed in the table. We have a line plot of data present in above figure. There is some incorrect on line plot and we have to determine it. See the table data and line plot data in above figure and determine students whose the wrong data is put on line plot. Now, All shoes length in inches,

Kat's shoes length = [tex]7 \frac{2}{8} [/tex]

Glen's shoes length=[tex]8 \frac{1}{2} [/tex]

Dan's shoes length = [tex]7\frac{1}{2} [/tex]

Amy's shoes length= [tex]7\frac{6}{8} [/tex]

Ben's shoes length = 8

Alex's shoes length= [tex]7 \frac{1}{4} [/tex]

Check the line plot, it represents

From above discussion we conclude that data value or shoes length of [tex]7 \frac{1}{2} [/tex] inches is missing in line plot and wrong value is put in place of it. Hence, required Dan's data point is missing.

For more information about line plot, visit :

https://brainly.com/question/30143735

#SPJ4

Complete question:

The. above figure completes the question.

Students M5|L40

A group of students measured the lengths of their shoes. The lengths are listed in the table. Use the table to locate the incorrect data in the line plot. Whose data point is missing from the line plot? 4 Shoe Length 1- 7 (in inches)

Kat Glen Dan Amy Ben Alex

2 8 Plotting Along

Answer:

The probability: P(A, A) if two cards are randomly selected with replacement is 1/9, therefore, option B.

You should be aware that probability is the chance of occurrence of an event. The probability of an event is written thus...

(P(E) = Number of required outcomes divided by the total number of possible outcomes)

The possible outcomes are the spelling of the word ADD...

The probabilities are 1/3, 1/3, 1/3 respectively.

So, P(A, A) if two cards are randomly selected with replacement will be...

P(A, A) = 1/3 * 1/3

Therefore the probability of the event is 1/9.

Hope it helped! :)

The value of BD in the similar triangle is 4 units.

A right angle triangle is a triangle that has one of its angles as 90 degrees. The triangles are similar .

Therefore, let's use the ratios of the similar triangle to find the side BD.

Let

BD = x

Therefore,

x / 6 = 6 / (5 + x)

cross multiply

x(x + 5) = 6 × 6

x² + 5x = 36

x² + 5x - 36 = 0

x² - 4x + 9x - 36 = 0

x(x - 4) + 9(x - 4) = 0

(x + 9)(x - 4) = 0

x = -9 or 4

Therefore, x(BD) can only be positive.

Hence,

BD = 4

learn more on triangle here: https://brainly.com/question/21552421

#SPJ1

The function f(x) that satisfies f ″(x) = [tex]2x + 7e^x[/tex] is given by: f(x) = [tex](1/3)x^3 + 7e^x + cx + d[/tex]

To find f given that f ″(x) = [tex]2x + 7e^x[/tex], we need to integrate the second derivative twice.

First, we integrate f ″(x) with respect to x to obtain f ′(x):

f ′(x) = ∫ f ″(x) dx = ∫[tex](2x + 7e^x) dx = x^2 + 7e^x + c[/tex]

where c is the constant of integration.

Next, we integrate f ′(x) with respect to x to obtain f(x):

f(x) = ∫ f ′(x) dx = ∫[tex](x^2 + 7e^x + c) dx = (1/3)x^3 + 7e^x + cx + d[/tex]

where d is the constant of integration.

Therefore, the function f(x) that satisfies f ″(x) = [tex]2x + 7e^x[/tex] is given by:

f(x) = [tex](1/3)x^3 + 7e^x + cx + d[/tex]

where c and d are constants that depend on the initial conditions of the problem.

In summary, to find f from the second derivative of f, we need to integrate twice and include two constants of integration, c and d. The resulting function f(x) will have the same second derivative as the given function, but the values of c and d will depend on the initial conditions.

To know more about second derivative refer here:

https://brainly.com/question/29090070

#SPJ11

Answer: 2/3

Step-by-step explanation:

2/9=(1/3)*P(A|B)

P(A|B)=2/3

We can now use the initial condition y(3) = 5 to solve for C:

y(3) = 5 = (-10 ± sqrt(100 + 8 [ln|3| - ln|3| + 125/2 ln(10) -

To solve the differential equation using separation of variables, we can separate the variables x and y on either side of the equation and then integrate both sides with respect to their respective variables.

Here are the steps:

Separate the variables:

dy / (yx + 5x) = dx / [tex](x^2 + 1)[/tex]

Integrate both sides:

∫ dy / (yx + 5x) = ∫ dx / [tex](x^2 + 1)[/tex]

We can simplify the left side by factoring out x:

∫ dy / [x(y + 5)] = ∫ dx / [tex](x^2 + 1)[/tex]

Using partial fraction decomposition on the right side:

∫ dy / [x(y + 5)] = (1/2) ∫ [1/(x + i) - 1/(x - i)] dx

Integrate each term:

∫ dy / [x(y + 5)] = (1/2) [ln|x + i| - ln|x - i|] + C

where C is the constant of integration.

Now we need to solve for y by isolating it on one side of the equation.

Multiply both sides by (y + 5):

∫ dy / x = (1/2) [ln|x + i| - ln|x - i|] (y + 5) + C

Integrate both sides with respect to y:

ln|x| = (1/2) [ln|x + i| - ln|x - i|] (y^2 + 10y) + Cy + D

where D is the constant of integration.

Solve for y using the initial condition:

When x = 3, y = 5. Substituting into the above equation, we get:

ln|3| = (1/2) [ln|3 + i| - ln|3 - i|] ([tex]5^2[/tex] + 105) + C5 + D

Simplifying and solving for D:

D = ln|3| - (1/2) [ln|3 + i| - ln|3 - i|] (75 + 50) - C*5

D = ln|3| - 125/2 ln(10) + C*5

Substitute D back into the equation for y:

ln|x| = (1/2) [ln|x + i| - ln|x - i|] (y^2 + 10y) + Cy + ln|3| - 125/2 ln(10) + C*5

Now we can simplify and solve for y:

ln|x| - ln|3| + 125/2 ln(10) = (1/2) [ln|x + i| - ln|x - i|] (y^2 + 10y) + Cy

y^2 + 10y = 2 [ln|x| - ln|3| + 125/2 ln(10) - Cy] / [ln|x + i| - ln|x - i|]

We can simplify further by using the quadratic formula:

y = (-10 ± sqrt(100 + 8 [ln|x| - ln|3| + 125/2 ln(10) - Cy] / [ln|x + i| - ln|x - i|])) / 2

We can now use the initial condition y(3) = 5 to solve for C:

y(3) = 5 = (-10 ± sqrt(100 + 8 [ln|3| - ln|3| + 125/2 ln(10) -

To learn more about respective visit:

https://brainly.com/question/19711470

#SPJ11

Answer:

10 - 7 = 3

Step-by-step explanation:

We Have facts are:

7 + 3 = 10

10 - 3 = 7

3 + 7 = 10

We are missing

10 - 7 = 3

So, the answer is 10 - 7 = 3

Answer:

1, 2, 2, 4, 8, 32

Step-by-step explanation:

a₁ = 1

a₂ = 2

a₃ = a₂ × a₁ = 2 × 1 = 2

a₄ = a₃ × a₂ = 2 × 2 = 4

a₅ = a₄ × a₃ = 4 × 2 = 8

a₆ = a₅ × a₄ = 8 × 4 = 32

the first six terms are 1, 2, 2, 4, 8, 32

The first six terms of the recursively defined sequence are: 1, 2, 2, 4, 8, 32.

A recursively defined sequence is a sequence of numbers that is defined in terms of the previous terms in the sequence. In other words, each term in the sequence is defined as a function of one or more previous terms. This type of sequence is also known as a recurrence relation.

To give the first six terms of the sequence where the first term is 1 and the second term is 2, and the rest of the terms are the product of the two preceding terms, follow these steps:

1. Write down the first two terms: 1, 2
2. Find the third term by multiplying the first and second terms: 1 * 2 = 2
3. Find the fourth term by multiplying the second and third terms: 2 * 2 = 4
4. Find the fifth term by multiplying the third and fourth terms: 2 * 4 = 8
5. Find the sixth term by multiplying the fourth and fifth terms: 4 * 8 = 32

So, the first six terms of the recursively defined sequence are: 1, 2, 2, 4, 8, 32.

To know more about recursively defined sequence refer here:

https://brainly.com/question/12374893?#

#SPJ11

The scenario which might be represented by the

expression below -100/4 is "Owing $100 on a credit card and making four equal payments totaling $25 each".

-100/4

= $-25

Hence, the expression is represented by the statement "Owing $100 on a credit card and making four equal payments totaling $25 each".

Read more on algebra:

https://brainly.com/question/4344214

#SPJ1