If a sample contains 12.5% parent, how many half lives ave passed? If the radioactive pair is K-40 and Ar-40, what is the actual age of the sample?

The area under the standard normal curve to the left of z = -1.76 and to the right of z = 0.07 is 0.5113 square units

To find the area under the standard normal curve to the left of z = -1.76, we can use a standard normal distribution table or a calculator with a normal distribution function. The table or calculator will give us the probability that a standard normal random variable is less than or equal to -1.76.

Using a standard normal distribution table, we can find that the area to the left of z = -1.76 is 0.0392 (rounded to four decimal places).

To find the area under the standard normal curve to the right of z = 0.07, we can subtract the area to the left of z = 0.07 from the total area under the curve, which is 1. Using a standard normal distribution table or calculator, we can find that the area to the left of z = 0.07 is 0.5279. Therefore, the area to the right of z = 0.07 is

1 - 0.5279 = 0.4721

Rounding this to four decimal places, we get 0.4721.

Therefore, the area under the standard normal curve to the left of z = -1.76 and to the right of z = 0.07 is

0.0392 + 0.4721 = 0.5113

Learn more about area here

brainly.com/question/12972781

#SPJ4

The value of x in the intersection of chords is 15.

option A.

The value of x is calculated by applying the following formula as shown below;

Based on intersecting chord theorem, the arc angle formed at the circumference due to  intersection of two chords, is equal to half the tangent angle.

∠RFE = ¹/₂ x 104⁰

∠ RFE = 52

The sum of ∠GFE  = 90 (line GE is the diameter)

∠GFE = ∠GFR + ∠RFE

90 = (x + 23) + 52

90 = x + 75

x = 90 - 75

x = 15

Learn more about chord angles here: brainly.com/question/23732231

#SPJ1

There are 16807 combinations when digits can be used more than once, 2520 permutations when digits cannot be repeated, but can come in any order, 21 combinations when digits cannot be repeated and must be written in increasing order. (a) is neither combination nor permutation, (b) is a permutation and (c) is a combination.

(a) Using digits 2-8, and allowing repetition, the number of different 5-digit numbers can be found using the multiplication principle. There are 7 choices for each digit, making a total of 7⁵ = 16,807 combinations.

(b) Using digits 2-8, without repetition, the number of 5-digit numbers is found using permutation. There are 7 choices for the first digit, 6 for the second, 5 for the third, 4 for the fourth, and 3 for the last. This is calculated as 7x6x5x4x3 = 2,520 permutations.

(c) Using digits 2-8, without repetition and in increasing order, there are 7 digits to choose from, and we need to pick 5. This is a combination and can be calculated using the formula: [tex]C(n,r) = n!/(r!(n-r)!),[/tex]

where n=7 and r=5.

So,[tex]C(7,5) = 7!/(5!2!)[/tex]

= 21 combinations.

(d) The counting question in (a) is neither combination nor permutation as repetition is allowed. (b) is a permutation since order matters and repetition is not allowed. (c) is a combination because order does not matter and repetition is not allowed.

This makes sense as combinations and permutations are used to count different types of arrangements, considering the importance of order and the possibility of repetition.

To know more about permutations refer here:

https://brainly.com/question/29855401#

#SPJ11

The correct answer is A. The statement is false. R3 is not even a subset of R2. This can be answered by the concept of three-dimensional vector.

The statement is false because R3, which represents a three-dimensional vector space, cannot be a subspace of R2, which represents a two-dimensional vector space. In order for a set to be a subspace, it must satisfy three conditions: (1) it contains the zero vector, (2) it is closed under vector addition, and (3) it is closed under scalar multiplication.

R2 and R3 have different dimensions, and therefore, they do not have the same number of components in their vectors. Consequently, vector addition and scalar multiplication, which are defined component-wise, cannot be applied between vectors from R2 and R3. Therefore, R3 cannot be a subspace of R2.

Therefore, the correct answer is A. The statement is false. R3 is not even a subset of R2

To learn more about three-dimensional vector here:

brainly.com/question/30531953#

#SPJ11

Therefore, the equation that models the number of total downloads y years after launch is: a. [tex]D = 200(1.16)^y:12[/tex].

An equation is a mathematical statement that shows the equality of two expressions. It usually consists of two sides separated by an equal sign (=). The expressions on both sides of the equal sign can include numbers, variables, and mathematical operations such as addition, subtraction, multiplication, and division.

Here,

The initial equation D = 200 (1.16) models the number of total downloads, D, for an app Carrie created m months after its launch. We know that there are 12 months in a year. So, we need to convert y years into months to use the given equation.

y years = 12y months

Substituting this value into the equation, we get:

[tex]D = 200(1.16)^{12y/12}:12[/tex]

[tex]D = 200(1.16)^y[/tex]

To know more about equation,

https://brainly.com/question/649785

#SPJ1

The statements that are true are "f(x) may have a global maximum at more than one x-value." and "f(x) may or may not have global extrema." Therefore, options A. and B. are true.

Consider a continuous function f(x) defined on the interval -∞ to ∞. Let's consider the given statements:

A. f(x) may have a global maximum at more than one x-value:

This statement is true. A function can have multiple x-values where the global maximum occurs.

B. f(x) may or may not have global extrema:

This statement is true. Depending on the function, it may have a global minimum, a global maximum, both, or neither.

C. f(x) may have a global minimum or a global maximum, but cannot have both:

This statement is false. A continuous function defined on an unbounded domain can have both a global minimum and a global maximum, such as a parabolic function.

D. f(x) must have both a global maximum and a global minimum:

This statement is false. There's no guarantee that a continuous function defined on an unbounded domain must have both a global maximum and a global minimum.

E. f(x) cannot have any global extrema:

This statement is false. A continuous function defined on an unbounded domain can have global extrema.

Therefore, options A. and B. are true.

Learn more about maximum:

https://brainly.com/question/12446886

#SPJ11

Yes,the size of the grand prize affect your chance of​ winning because your expected profit increases as the grand prize increases. Therefore Option C would be the correct answer.

This is because the higher the grand prize, the more people are likely to enter the lottery, increasing the overall amount of money being paid into the lottery.

This, in turn, increases the size of the prize pool, which increases the expected profit for each winner. However, it's important to note that the odds of winning are still determined by the properties of the lottery, such as the number of tickets sold and the number of possible winning combinations.

Visit here to learn more about  profit : https://brainly.com/question/21297845
#SPJ11

The solution for the equation log₃(x⁸) * log₃(x) = 2 is [tex]x = 9^{(1/9)}[/tex].

In mathematics, the logarithm is the inverse function to exponentiation. That means the logarithm of a number x to the base b is the exponent to which b must be raised, to produce x.

We have to solve the equation log₃(x⁸) * log₃(x) = 2.

Rewrite the given equation using the properties of logarithms.
log₃(x⁸) * log₃(x) = log₃(x⁸) + log₃(x¹)

(using the property of logarithms that [tex]log_a(b) \times log_a(c) = log_a(b) + log_a(c)[/tex])

Simplify the expression.
log₃(x⁸) + log₃(x¹) = log₃(x⁸ × x¹)

(using the property of logarithms that [tex]log_a(b) + log_a(c) = log_a(b c)[/tex])

Rewrite the equation.
log₃(x⁸ * x¹) = 2

Eliminate the logarithm using the property of logarithms that if [tex]log_a(b) = c[/tex], then [tex]a^c = b[/tex].
3² = x⁸ × x¹

Simplify the equation.
9 = x⁹

Solve for x.
[tex]x = 9^{(1/9)}[/tex]
This is the required solution.

Learn more about a solution:

https://brainly.com/question/25326161

#SPJ11

The directional derivative is (-3/2√10) + (2 ln(2)/√10).

To compute the directional derivative of f(x,y) = y² ln(x) at the point (2,1) in the direction of the vector v = -3i + j, first find the gradient of f and then take the dot product with the unit vector in the direction of v.

The gradient of f(x, y) is given by (∂f/∂x, ∂f/∂y) = (y²/x, 2y ln(x)). At the point (2,1), this becomes (1/2, 2 ln(2)).

Next, find the unit vector of v by dividing v by its magnitude: u = v/||v|| = (-3, 1)/√((-3)² + 1²) = (-3, 1)/√10.

Now, take the dot product of the gradient and the unit vector: ((1/2, 2 ln(2)) · (-3/√10, 1/√10)) = (-3/2√10) + (2 ln(2)/√10).

To know more about directional derivative click on below link:

https://brainly.com/question/30365299#

#SPJ11

The correct answer to the question is "You think the 1968 minimum wage was at most $10.86 when, in fact, it was not."

Explanation: -

In statistical hypothesis testing, a Type I error is the rejection of a null hypothesis when it is actually true.

In this scenario, the null hypothesis is that the 1968 minimum wage is p≤$10.86. If a researcher thinks that the 1968 minimum wage was at most $10.86, but in reality, it was not, this would be a Type I error. In other words, the researcher rejected the null hypothesis (that the minimum wage was $10.86 or less) when it was actually true.

To determine the probability of making a Type I error, we use the significance level, denoted by α. The significance level is the probability of rejecting the null hypothesis when it is actually true. If we set α=0.05, this means that there is a 5% chance of making a Type I error. So, if we reject the null hypothesis that the 1968 minimum wage is $10.86 or less, when in fact, it is true, we are making a Type I error with a probability of 0.05 or 5%.

Therefore, the correct answer to the question is "You think the 1968 minimum wage was at most $10.86 when, in fact, it was not."

Know more about "null hypothesis" click here:

https://brainly.com/question/28920252

#SPJ11

The within sum of squares, which both represent the variability within subjects that cannot be explained by the treatment effect.

In a 1-factor repeated-measures ANOVA, the error sum of squares represents the variability in the data that cannot be explained by the treatment effect, i.e., the variability within subjects. The within sum of squares also reflects this variability within subjects, as it is calculated by summing the squared deviations of each individual score from their respective group means.

Therefore, the correct answer is A: the error sum of squares equals the within sum of squares.

Option B (the subject sums of squares) and Option C (minus the subject sum of squares) are not correct because the subject sums of squares represent the variability between subjects, which is not included in the error sum of squares or the within sum of squares.

Option D (minus the between group sum of squares) is also not correct because the between group sum of squares represents the variability between groups (i.e., the treatment effect) and is not included in the error sum of squares or the within sum of squares.

In summary, the error sum of squares in a 1-factor repeated-measures ANOVA equals the within sum of squares, which both represent the variability within subjects that cannot be explained by the treatment effect.

To learn more about represent visit:

https://brainly.com/question/13246446

#SPJ11

The size of the reflex angle POR is 302 degrees.

Since the angle PQR is given as 29 degrees and it lies on the circumference of the circle, we know that it is an inscribed angle that intercepts the arc PR. The measure of an inscribed angle is half the measure of the intercepted arc. Therefore, we can find the measure of the arc PR as:

Arc PR = 2 × Angle PQR = 2 × 29 = 58 degrees

Since angle POR is a reflex angle that contains the inscribed angle PQR and the arc PR, we can find its measure by subtracting the measure of angle PQR from 360 degrees:

Angle POR = 360 - Arc PR = 360 - 58 = 302 degrees

To learn more about reflex angle here:

https://brainly.com/question/30847676

#SPJ1

The solution to the nonhomogeneous differential equation y′′+9y=cos(3x)+sin(3x) with initial conditions y(0)=3 and y′(0)=1 is y(x) = c1*cos(3x) + c2*sin(3x) + (1/6)*x*sin(3x) - (1/18)*cos(3x).


Step 1: Find the complementary function, y_h, which is the general solution to the associated homogeneous equation y'' + 9y = 0. The characteristic equation is r^2 + 9 = 0, so r = ±3i. Hence, y_h = c1*cos(3x) + c2*sin(3x).

Step 2: Find a particular solution, y_p, to the nonhomogeneous equation. Assume y_p = A*cos(3x) + B*sin(3x) + C*x*cos(3x) + D*x*sin(3x). Plug this into the nonhomogeneous equation and simplify to determine A, B, C, and D. We get A=-1/18, B=0, C=0, D=1/6.

Step 3: Combine the complementary function and particular solution: y(x) = y_h + y_p = c1*cos(3x) + c2*sin(3x) - (1/18)*cos(3x) + (1/6)*x*sin(3x).

Step 4: Apply initial conditions to find c1 and c2. y(0) = 3 => c1 = 3 + 1/18, y'(0) = 1 => c2 = 1/6. Thus, y(x) = (3+1/18)*cos(3x) + (1/6)*sin(3x) + (1/6)*x*sin(3x) - (1/18)*cos(3x).

To know more about differential equation click on below link:

https://brainly.com/question/14620493#

#SPJ11

By strong induction, we have proven that for all n ≥ 30, n cents of postage can be formed using just 4-cent and 11-cent stamps.

To prove that any amount of postage greater than or equal to 30 cents can be formed using just 4-cent and 11-cent stamps, we will use strong induction.

Base Case: For n = 30, we can form 30 cents of postage using three 10-cent stamps.

Inductive Hypothesis: Assume that for all k such that 30 ≤ k ≤ n, we can form k cents of postage using just 4-cent and 11-cent stamps.

Inductive Step: We want to show that we can form (n+1) cents of postage using just 4-cent and 11-cent stamps.

Case 1

We use at least one 11-cent stamp to form (n+1) cents of postage.

If we use one 11-cent stamp, we need to form (n+1-11) cents of postage using just 4-cent and 11-cent stamps. By our inductive hypothesis, we know that we can form (n+1-11) cents of postage using just 4-cent and 11-cent stamps since 30 ≤ (n+1-11) ≤ n. Thus, we can add one 11-cent stamp to the solution for (n+1-11) cents to get a solution for (n+1) cents.

If we use more than one 11-cent stamp, we can use one less 11-cent stamp and add some combination of 4-cent stamps to get a solution for (n+1) cents. By our inductive hypothesis, we know that we can form the remaining amount using just 4-cent and 11-cent stamps.

Case 2

We use only 4-cent stamps to form (n+1) cents of postage. In this case, we need to form (n+1) cents of postage using only 4-cent stamps, which means we need to use (n+1)/4 stamps. If (n+1) is not divisible by 4, then we can use one 11-cent stamp to make up the difference. Otherwise, we can use (n+1)/4 4-cent stamps to form (n+1) cents of postage.

Since we have shown that we can form (n+1) cents of postage using just 4-cent and 11-cent stamps in both cases, our inductive step is complete.

Learn more about strong induction here

brainly.com/question/31450966

#SPJ4

The given question is incomplete, the complete question is:

Prove the statement that n cents of postage can be formed with just 4-cent and 11-cent stamps using strong induction, where n ≥ 30.

The particular solution satisfying the initial condition y(0) = 2 is y(x) = 2e^(-8x).

To solve the separable differential equation dy/dx = -8y and find the particular solution satisfying the initial condition y(0) = 2, follow these steps:

Step 1: Identify the given equation and initial condition
The given equation is dy/dx = -8y, and the initial condition is y(0) = 2.

Step 2: Separate the variables
To separate the variables, divide both sides by y and multiply by dx:
(dy/y) = -8 dx

Step 3: Integrate both sides
Integrate both sides with respect to their respective variables:
∫(1/y) dy = ∫-8 dx

The result is:
ln|y| = -8x + C₁

Step 4: Solve for y
To solve for y, use the exponential function:
y = e^(-8x + C₁) = e^(-8x)e^(C₁)

Let e^(C₁) = C₂ (since C₁ and C₂ are both constants):
y = C₂e^(-8x)

Step 5: Apply the initial condition
Now, apply the initial condition y(0) = 2:
2 = C₂e^(-8 * 0)
2 = C₂

Step 6: Write the particular solution
Finally, substitute the value of C₂ back into the equation:
y(x) = 2e^(-8x)

learn more about the differentiable: https://brainly.com/question/15406243

#SPJ11

We want to write this in the form given in the question, we can let c_n = e²/n!: \displaystyle \sum_{n=0}\infty c_n(x-2), where c_n = e²/n!

The Taylor series for f(x) = e{x} about x=2 can be written as:

\displaystyle \sum_{n=0}\infty \frac{f{(n)}(2)}{n!}(x-2)n

Since f(x) = e{x}, we can find the derivatives of f(x) and evaluate them at x=2:

f'(x) = e{x}, f''(x) = e{x}, f'''(x) = e{x}, and so on.

So, we have:

f(2) = e²
f'(2) = e²
f''(2) = e²
f'''(2) = e²
and so on.

Plugging these values into the formula for the Taylor series, we get:

\displaystyle \sum_{n=0}\infty \frac{e²}{n!}(x-2)

Know more about Taylor series here:

https://brainly.com/question/29733106

#SPJ11

write the taylor series for f(x) = e^{x} about x=2 as \displaystyle \sum_{n=0}^\infty c_n(x-2)^n. Find the first five coefficients.

c0=

c1=

c2=

c3=

c4=

To understand the relation between Hollerith card code, EBCDIC, and ASCII, and how they relate to binary and hexadecimal number systems.
The relation between Hollerith card code, EBCDIC, and ASCII lies in their purpose, which is to represent data and characters using different encoding systems.

Explanation: -

1. Hollerith Card Code: Invented by Herman Hollerith, this code is used to represent data on punched cards. Each card contains a series of punched holes that correspond to characters or numbers, allowing data to be stored and processed.

2. EBCDIC (Extended Binary Coded Decimal Interchange Code): Developed by IBM, this character encoding system is used primarily in IBM mainframe computers. EBCDIC represents alphanumeric characters and special symbols using 8-bit binary codes.

3. ASCII (American Standard Code for Information Interchange): This widely-used character encoding system represents alphanumeric characters, control characters, and special symbols using 7-bit binary codes.

Here's how these encoding systems relate to binary and hexadecimal number systems:

Binary: Each character in EBCDIC and ASCII is represented using a unique combination of 0s and 1s. For example, in ASCII, the character 'A' is represented by the binary code '1000001'.

Hexadecimal: This number system is used to represent binary values in a more compact and human-readable format. It uses base 16 (0-9 and A-F) to represent binary numbers. For example, the binary code '1000001' (which represents 'A' in ASCII) can be represented in hexadecimal as '41'.

In summary, Hollerith card code, EBCDIC, and ASCII are different methods for encoding characters and data. They relate to binary and hexadecimal number systems by using these systems to represent characters in a compact, machine-readable format.

Know more about " Ebcdic and ascii" click here:

https://brainly.com/question/7851735

#SPJ11

The number line and graph of the inequality −3 ≤ x ≤ 0 represents -3 and 0 both are included points.

The inequality is written as,

−3 ≤ x ≤ 0

Plot the given inequality  -3 ≤ x ≤ 0 on the number line.

On the number line, we can represent this as ,

Value of x is in between -3 and 0.

Number line is attached.

The interval between -3 and 0, including both endpoints, represents the region that satisfies the inequality.

On the coordinate plane, we can represent this inequality on the x-axis as a shaded region between -3 and 0, including both endpoints:

Graph of the inequality is also attached here.  

The shaded region between -3 and 0, including both endpoints, represents the region that satisfies the inequality.

Therefore, the inequality region include both the endpoints -3 and 0 on number line and coordinate plane.

Learn more about inequalities here

brainly.com/question/8086298

#SPJ1

The given question is incomplete, I answer the question in general according to my knowledge:

Find the region which satisfies the inequality −3≤ x ≤0 on the number line or coordinate plane.

Answer:

C

Step-by-step explanation:

7 + 45/5 = 16

If an estimated regression line has a y-intercept of 10 and a slope of 4, then when x = 2 the actual value of y is 18, the actual value of y remains unknown.

When working with an estimated regression line, we typically use the equation y = b0 + b1x, where y is the dependent variable (the value we want to predict), x is the independent variable, b0 is the y-intercept, and b1 is the slope of the line.

In this case, the estimated regression line has a y-intercept (b0) of 10 and a slope (b1) of 4. So, the equation of the line is y = 10 + 4x.

Now, you want to know the actual value of y when x = 2. To find the estimated value of y, plug x = 2 into the equation:

y = 10 + 4(2) = 10 + 8 = 18.

However, it's important to note that the estimated regression line is only an approximation of the relationship between x and y. It does not provide the exact value of y for a given x; instead, it provides a prediction based on the observed data used to generate the line. In reality, there may be other factors influencing the value of y that are not accounted for by the regression line.

So, while the estimated value of y when x = 2 is 18, the actual value of y remains unknown. It could be close to the estimated value or significantly different, depending on the degree of variation in the data and any additional factors that may affect the relationship between x and y.

To know more about estimated regression refer here:

https://brainly.com/question/28461635

#SPJ11

It is generally recommended to keep the load factor below 0.75 for hash tables using either linear probing or chaining.

No, neither linear probing nor chaining can function properly with a load factor greater than 1.

When the load factor exceeds 1, it means that the number of items in the hash table exceeds the number of available buckets, and collisions become unavoidable.

In linear probing, this results in an endless loop of searching for an empty bucket, making it impossible to insert new items or retrieve existing ones.

In chaining, a high load factor can cause the chains to become very long, slowing down retrieval operations significantly.

In extreme cases, the chains can become so long that the hash table degenerates into a linked list, rendering the hash table useless.

Therefore, it is generally recommended to keep the load factor below 0.75 for hash tables using either linear probing or chaining.

Learn more about load factor.

brainly.com/question/30429887

#SPJ11

The expected value of X is then calculated as E(X) = ∫x f(x) dx from 0 to 1, which simplifies to E(X) = k∫x⁵ dx from 0 to 1. Evaluating this integral gives us the expected value of X, which is equal to 5/6.

The expected value of the random variable X with a probability density function (pdf) of f(x) = kx⁴ is calculated as E(X) = ∫x f(x) dx from negative infinity to positive infinity.

Integrating f(x) from negative infinity to positive infinity gives us the normalizing constant k, which is equal to 1/∫x⁴ dx from 0 to 1. Simplifying this gives us k = 5.

The expected value of X is then calculated as E(X) = ∫x f(x) dx from 0 to 1, which simplifies to E(X) = k∫x⁵ dx from 0 to 1. Evaluating this integral gives us E(X) = k/6, which is equal to 5/6. Therefore, the expected value of X with f(x) = kx⁴ pdf is 5/6.

In summary, the expected value of a random variable X with a probability density function (pdf) of f(x) = kx⁴ is calculated by integrating x f(x) from negative infinity to positive infinity. Integrating f(x) from negative infinity to positive infinity gives us the normalizing constant k, which is equal to 1/∫x⁴ dx from 0 to 1.

To know more about probability density function click on below link:

https://brainly.com/question/30403935#

#SPJ11

The magnitude and the direction of the vectors  v=⟨−12,5⟩ in degrees for the condition 0 ≤ θ < 360 is equal to 13 and -22.62 degrees respectively.

Let us consider two vectors named v₁ and v₂.

Here, in degrees

0 ≤ θ < 360

v=⟨−12,5⟩

This implies that

The value of the vector 'v₁' = -12

The value of the vector 'v₂' = 5

Magnitude of the vectors v₁ and v₂ is equals to

=√ ( v₁ )² + ( v₂)²

Substitute the values of the  vectors v₁ and v₂ we get,

⇒Magnitude of the vectors v₁ and v₂ = √ (-12 )² + ( 5)²

⇒Magnitude of the vectors v₁ and v₂ = √144 + 25

⇒Magnitude of the vectors v₁ and v₂ = √169

⇒Magnitude of the vectors v₁ and v₂ = 13

Direction of the vectors for the condition 0 ≤ θ < 360 defined by

θ = tan⁻¹ ( v₂ / v₁ )

⇒ θ = tan⁻¹ ( 5 / -12 )

⇒ θ = -22.62 degrees.

Therefore, the magnitude and the direction of the vectors is equal to 13 and -22.62 degrees respectively.

learn more about vectors here

brainly.com/question/4309149

#SPJ4

a. To find the standard error of the sampling distribution of sample means:

Standard deviation = sqrt(Variance of the population)

Since the population standard deviation is not given, we assume it is 1.

Standard error = (Standard deviation) / sqrt(n)

        = (1) / sqrt(100)

        = 0.01  (rounded to 2 decimal places)

b.

Standard error = 0.01  (from part a)

z = (4.7 - mean) / 0.01

        = (4.7 - 5) / 0.01

        = -0.3  (rounded to 2 decimal places)

Chance that sample mean is between 4.7 and 5.9 hours

        = P(z > -0.3) + P(z < 0.3)

        = 0.762 + 0.761

        = 0.7524  (rounded to 4 decimal places)

c.

Standard error = 0.01  (from part a)

z = (5.1 - mean) / 0.01

        = 0.1  (rounded to 2 decimal places)

Chance that sample mean is between 5.1 and 5.5 hours

        = P(z > 0.1) + P(z < -0.1)

        = 0.4583 + 0.4603

        = 0.4593  (rounded to 4 decimal places)

d.

Standard error = 0.01  (from part a)

z = (7.60 - mean) / 0.01

        = 3  (rounded to 2 decimal places)

Chance that sample mean is greater than 7.60 hours

        = P(z > 3)

        = 0  (rounded to 4 decimal places)

This would be very unlikely.

Answer:

To find out what should be subtracted from -5/4 to get -1, we need to solve the equation if you dont know something in math you can always put it as x first.

-5/4 - x = -1

where x is the number that needs to be subtracted.

To solve for x, we have to simplify the left side of the equation:

-5/4 - x = -1

-5/4 + 4/4 - x = -1  (adding 4/4 to both sides)

-1/4 - x = -1

Now, we can isolate x by adding 1/4 to both sides of the equation:

-1/4 - x = -1

-1/4 + 1/4 - x = -1 + 1/4  (adding 1/4 to both sides)

-x = -3/4

Finally, we can solve for x by multiplying both sides by -1:

-x = -3/4

x = 3/4

Therefore, the number that should be subtracted from -5/4 to get -1 is 3/4.

To calculate the iterated integral of the function (6x^2y - 2x) with respect to y from y=0 to y=3 and with respect to x from x=1 to x=2, first integrate the function with respect to y. Then evaluate the integral at the given limits for y. Next, integrate the resulting expression with respect to x and evaluate the integral at the given limits for x. The final result will be the value of the iterated integral.

1. First, integrate the function with respect to y:

∫(6x^2y - 2x) dy = 3x^2y^2 - 2xy + C(y)

2. Now, evaluate the integral at the given limits for y:

[3x^2(3)^2 - 2x(3)] - [3x^2(0)^2 - 2x(0)] = 27x^2 - 6x

3. Next, integrate this result with respect to x:

∫(27x^2 - 6x) dx = 9x^3 - 3x^2 + C(x)

4. Finally, evaluate the integral at the given limits for x:

[9(2)^3 - 3(2)^2] - [9(1)^3 - 3(1)^2] = (72 - 12) - (9 - 3) = 60 - 6 = 54

So, the iterated integral of the given function is 54.

Learn more about the iterated integral :

https://brainly.com/question/31433890

#SPJ11

We need a sample size of at least 1536 to be 95% confident that our sample mean will be within 0.0005 inches of the true mean.

To determine how large a sample is needed, we can use the formula for the margin of error:
To determine the required sample size for a 95% confidence interval with a specified margin of error, we'll use the following formula:
n = (Z * σ / E)^2
where:
- n is the sample size
- Z is the Z-score for a given confidence level (1.96 for a 95% confidence interval)
- σ is the population standard deviation
- E is the margin of error (0.0005 inches in this case)

The margin of error = Z-score * (standard deviation / square root of sample size)

Since we want to be 95% confident, the Z-score will be 1.96. We are given that we want the sample mean to be within 0.0005 inches of the true mean, so the margin of error will be 0.0005.

Thus, we can rearrange the formula to solve for the sample size:

Sample size = (Z-score)^2 * (standard deviation)^2 / (margin of error)^2

Since we do not know the population standard deviation, we can use the sample standard deviation as an estimate. Let's assume the sample standard deviation is 0.001 inch.

Plugging in the values, we get:

Sample size = (1.96)^2 * (0.001)^2 / (0.0005)^2

Sample size = 1536

Therefore, we need a sample size of at least 1536 to be 95% confident that our sample mean will be within 0.0005 inches of the true mean.

Learn more about Sample size:

brainly.com/question/25894237

#SPJ11