If a naturally occurring sample of an unidentified element is found to contain three isotopes (A, B, and C) and consists of 90.5% isotope A (mass number 20), 0.3% isotope B (mass number 21), and 9.3% isotope C (mass number 22), the atomic weight of the element measured from the sample will be greater than 21 amu.
To calculate the average atomic mass, multiply the fraction through the mass number for every isotope, then add them together. Whenever we do mass calculations concerning elements or compounds (combos of elements), we usually use average atomic loads.
For instance, carbon-14 is a radioactive isotope of carbon that has six protons and 8 neutrons in its nucleus. We name it carbon-14 because the overall range of protons and neutrons within the nucleus also called the mass number, provides up to fourteen (6+8=14).
Together, the quantity of protons and the range of neutrons determine an detail's mass variety. Due to the fact, that an element's isotopes have barely unique mass numbers, the atomic mass is calculated by obtaining the suggested mass numbers for its isotopes.
Learn more about atomic mass here https://brainly.com/question/1358482
#SPJ4
The atmospheric pressure on mars is around 7 millibar, where the gravitational constant
is 3.7 m/s² instead of Earth's 9.8 m/s². What height of water column would be stable on
Mars? Assume a density of water of 1.0g/mL.
The height of water column would be stable on Mars is 1.89 m
To answer the question, we need to know what the pressure on mars is
What is the pressure on mars?The pressure on mars P = ρgh where
ρ = density of water = 1.0 g/mL = 1.0 × 10⁻³ kg/1 × 10⁻³ L = 1 kg/L = 1 kg/1 × 10⁻³ m³ = 1000 kg/m³, g = acceleration due to gravity on mars = 3.7 m/s² and h = height of water column.Height of water columnMaking h subject of the formula, we have
h = P/ρg
Since
P = 7 mbar = 7 × 10⁻³ bar = 7 × 10⁻³ × 10⁵ Pa = 700 Pa,ρ = 1000 kg/m³ and g = 3.7 m/s²Substituting the values of the variables into the equation, we have
h = P/ρg
h = 700 Pa/(1000 kg/m³ × 3.7 m/s²)
h = 700 Pa/370 kg/m²s²
h = 1.89 m
So, the height of water column would be stable on Mars is 1.89 m
Learn more about height of water column here:
https://brainly.com/question/12451614
#SPJ1
A gas is contained in a thick-walled
balloon. When the pressure
changes from 1.21 atm to 2.52 atm,
the volume changes from 3.75 L to
1.72 L and the temperature changes
from 293 K to____________ K.
Which variable is held constant?
A.P B.V C.n D.T
Thank you! :)
Answer:
C.) n
Explanation:
-----> P = pressure (atm)
-----> V = volume (L)
-----> T = temperature (K)
-----> n = number of moles
According to the problem, it seems like pressure (P), volume (V), and temperature (T) are all changing. The problem never brings up whether the number of moles (n) has changed. Therefore, the number of moles (n) must have been held constant.
________________________________________________________
If you need to know what the temperature changes to....
When the number of moles is held constant, you can find the change in the other variables using the Combined Gas Law equation:
P₁V₁ / T₁ = P₂V₂ / T₂
In this formula, "P₁", "V₁", and "T₁" represent the initial pressure, volume, and temperature. "P₂", "V₂", and "T₂" represent the final pressure, volume, and temperature. You can find the final temperature by plugging in the given values and simplifying.
P₁ = 1.21 atm P₂ = 2.52 atm
V₁ = 3.75 L V₂ = 1.72 L
T₁ = 293 K T₂ = ? K
P₁V₁ / T₁ = P₂V₂ / T₂ <----- Equation
(1.21 atm)(3.75 L) / (293 K) = (2.52 atm)(1.72 L) / T₂ <----- Insert values
0.015486 = (2.52 atm)(1.72 L) / T₂ <----- Simplify left side
0.015486 = 4.3344 / T₂ <----- Multiply 2.52 and 1.72
0.015486 x T₂ = 4.3344 <----- Multiply both sides by T₂
T₂ = 279.885 <----- Divide both sides by 0.015486
T₂ = 280 K <----- Answer in correct sig figs
Water, water everywhere. water is an abundant compound on our planet and it is sometimes known as "the universal solvent" because of it's unique properties, such as polarity and it's ability to dissolve almost any other substance. what implications does this have for the water found on earth? from the water in our oceans to the groundwater found deep beneath our soil? does this property benefit our planet? is there any problems you think the planet may face because of these unique properties?
The properties of water benefits our planet.
Does this property benefit our planet?Yes, the properties of water benefits our planet because it can dissolve huge number of solutes due to its polarity while on the other hand, its normal viscosity allows water to flow easily around the globe.
Is there any problems you think the planet may face because of these unique properties?No, in my opinion the planet may face no problems because of these unique properties because these properties are important for us.
Learn more about water here: https://brainly.com/question/1313076
#SPJ1
Answer ASAP please!!!!!!
Answer:
They fall slower.
Explanation:
moon's gravitation force is effected by the mass of the moon
but because the moon has less mass,
objects fall slower because it has less gravitation force
________________________________________________
Hope this helped.
How many grams of magnesium chloride must be added to 725 mL of water to create a solution with an anion concentration equal to 0.800 M
55.2218 grams of magnesium chloride must be added to 725 mL of water to create a solution with an anion concentration equal to 0.800 M.
How to calculate the no. of moles ?To calculate the number of moles from molarity as
[tex]\frac{\text{x moles}\ MgCl_2}{0.725\ \text{L solution}} = \frac{0.8\ \text{moles}\ MgCl_2}{1.0\ \text{L solution}}[/tex]
x moles MgCl₂ = [tex]\frac{0.8\ \text{moles}\ MgCl_2}{1.0\ \text{L solution}} \times 0.725\ \text{L solution}[/tex]
= 0.58 moles MgCl₂
What is Molar Mass ?Mass of one mole of substance is known as molar mass.
Molar mass of MgCl₂ = Atomic mass of Mg + 2 (Atomic mass of Cl)
= 24.31 + 2 (35.5)
= 95.21
Convert moles to grams
0.58 moles MgCl₂ × [tex]\frac{95.21\ g}{1\ \text{mole}\ MgCl_2}[/tex]
= 55.2218 grams
Thus from the above conclusion we can say that 55.2218 grams of magnesium chloride must be added to 725 mL of water to create a solution with an anion concentration equal to 0.800 M.
Learn more about the Molar mass here: https://brainly.com/question/837939
#SPJ4
In a filtration experiment 25cm of a solution of a sodium hydroxide contain 8g per litre was required for complete neutralization of 0.245g of a diabasic acid. Calculate the relative molecular mass of the acid (Na= 23, O=16,H=1)
The relative molecular mass of an element is a proportion of the mass of the unified amu. The relative molecular mass of sodium hydroxide is 40.
What is molecular mass?The molecular mass of a substance is an addition of the individual masses of the element that makes the compound.
Moles of NaOH = 8 mole
Molarity = 0.2 M
Moles of sodium hydroxide in 25 cm³: 25 × 0.2 = 0.005 moles
The mole ratio between the two moles:
0.2 ÷ 0.005 = 40
Therefore, 40 is the relative molecular mass of the acid.
Learn more about relative molecular mass here:
https://brainly.com/question/20382674
#SPJ1
The concentration ratio for an oligopoly is Group of answer choices Over 60 percent 90 percent 100 percent Under 40 percent
The concentration ratio for an oligopoly is Over 60 percent.
The concentration ratio reveals the intensity of rivalry among the businesses that make up an industry. It measures the size of the firms in relation to the total industry. The presence of a monopoly in a certain industry or the absence of competition for such enterprises are both indicated by high concentration ratios that are closer to 100%.As a general rule, an oligopoly is present when the top five companies in the market account for more than 60% of all market sales. When one company's concentration ratio equals 100 percent, the market is said to be monopolized.learn more about oligopoly here: https://brainly.com/question/13635083
#SPJ4
What conclusion can you make about the atomic number and the number of neutrons for the first 20 elements of the Periodic Table?
Answer: It has more neutrons. Its mass number is larger than the atomic mass number for carbon.
Explanation:
We can see that all the isotopes of Carbon occupies the same slot in the periodic table and thus the same periodic number.
Atomic number of carbon = 6
Periodic Table gives us the information of Atomic number and mass number of atoms of an element.
Atomic number does not give any information about the number of neutrons of an atom. Atomic number of an element is the number of protons in the nucleus of each atom of that element.
Mass number is defined as the total number of protons and neutrons in an atom. Mass number of a typical carbon atom is equal to 12.
Isotopes are variants of a particular chemical element which differ in number of neutrons. Hence, the mass number of different isotopes of the same element varies and gives us information about the number of neutrons present in that atom at the same time.
The mass number of Carbon-14 is equal to 14.
Atomic number of C-14 = Protons in Carbon-14 = 6
Neutrons in Carbon-14 = Mass Number - Atomic Number
Neutrons in C-14 = 14-6
= 8
What does the development of hook-and-loop tape illustrate?
Answer:
the role of the microscope world in creating new material.
Explanation:
Trust me ;)
C₂H5OH +202 → 2CO2 + 3H₂O + 1367 kJ
What is the ratio between the energy and oxygen based on the equation?
-[?] kJ
[?]mol O2
The ratio between the energy and oxygen based on the equation is 683.5 KJ/mol
Data obtained from the questionEquation => C₂H₅OH + 2O₂ → 2CO₂ + 3H₂O + 1367 KJEnthalpy change (ΔH) = 1367 KJRatio of energy to oxygen =?How to determine the ratio of energy to oxygenFrom the equation, we obtained the following:
Energy = 1367 KJMole of O₂ = 2 molesThus, the ratio of energy to oxygen is given as:
Energy / Oxygen = 1367 / 2
Energy / Oxygen = 683.5 KJ/mol
Learn more about enthalpy change:
https://brainly.com/question/11967318
#SPJ1
Given that the initial rate constant is 0.0110s−1 at an initial temperature of 21 ∘C , what would the rate constant be at a temperature of 150∘C for the same reaction described in Part A?
This was part A
The activation energy of a certain reaction is 45.5 kJ/mol . At 21 ∘C , the rate constant is 0.0110s−1 . I got 32.4 degree C
The rate constant is mathematically given as
K2=2.67sec^{-1}
What is the Arrhenius equation?The rate constant for a particular reaction may be calculated with the use of the Arrhenius equation. This constant can be stated in terms of two distinct temperatures, T1 and T2, as follows:
[tex]ln(\frac{K2}{K1})= (\frac{Ea}{R})*(\frac{1}{T1}-\frac{1}{T2})[/tex]
Therefore
KT1= 0.0110^{-1}
T1= 21+273.15
T1= 294.15K
T2= 200
T2=200+273.15
T2= 473.15K
Ea= 35.5 Kj/Mol
Hence, in j/mol R Ea is
Ea=35.5*1000 j/mol R
[tex]ln(\frac{K2}{0.0110})= (\frac{35.5*1000}{8.314})*(\frac{1}{294.15}-\frac{1}{473.15}\\\\ln(\frac{K2}{0.0110})=5.492[/tex]
K2/0.0110 =e^(5.492)
K2/0.0110 =242.74
K2= 242.74*0.0110
K2=2.67sec^{-1}
In conclusion, rate constant
K2=2.67sec^{-1}
Read more about rate constant
https://brainly.com/question/20305871
#SPJ1
What volume of SO2, at room temperature and pressure is produced on heating 9.7g
of Zinc Sulphide (ZnS) if reaction takes place as follows
2ZnS()+ 302(g)
→2ZnO(+2SO2(g)
(A) 2.4 dm³
(B) 4.8 dm³
(C) none of these
Answer:
C. None of these
2 volumes of zinc sulphide produces two volumes of Sulphur dioxide. So, 9.7g of ZnS will produce nothing less than 9.7g of SO2.
How many moles of hydrogen atoms are contained in one mole of C6H12?
Answer:
72264x10²³moles
Explanation:
By Avogadro constant one mole of a substance is equal to 6022x10²³. so 12 hydrogen atoms =
12×6022x10²³=72264x10²³ moles.
In terms of carbon monoxide, 1 marijuana joint is the equivalent of how many cigarettes?.
The main chemical compound in marijuana that has a harmful effect on cells lining the airways is tetrahydrocannabinol, or THC. This compound is similar to nicotine, which is the primary harmful chemical compound in cigarette smoke.
In addition to THC, marijuana smoke also contains more tar than cigarette smoke. Tar is made up of small particles that are easily inhaled and are known to be carcinogenic. The combination of the THC, nicotine, and tar in marijuana smoke is what makes it so damaging to cells lining the airways.
The daily smoking of one marijuana joint is equivalent to the amount of damage to cells lining the airways as around five cigarettes.
To know more about cigarettes, visit;
https://brainly.com/question/30902635
#SPJ1
why aluminium is used in aeroplane ?
Answer:
Aluminum plays a vital role in the construction of aircraft. Its high resistance to corrosion and good weight to strength to cost ratio makes it the perfect material for aircraft construction. But the one property that makes aluminum the ideal metal for aircraft construction is its resistance to UV damage.
Explanation:
it's quite long but hope it helps
There are two stable isotopes of carbon, carbon -
12
and carbon -
13
. Carbon -
12
has a mass of exactly
12
amu, and carbon -
13
has a mass of
13.003
amu. The average atomic mass of carbon
is
12.011 amu. What does this tell you about the
relative abundances of the two isotopes?
a. Carbon -
12
is more abundant than carbon
13
because the average atomic mass is closer
to the mass of carbon
12
b. There is not enough information to
determine anything about the relative
abundances of the two isotopes.
c. Carbon
13
is more abundant than carbon
12
because the average atomic mass is closer
to the mass of carbon
13
d. Carbon
12
and carbon -
13
are equally abundant
There is not enough information to determine anything about the relative abundances of the two isotopes.
What are isotopes?Isotopes are atoms that have the same atomic number but different mass numbers. We know that all the isotopes of an element are not available to the same extent in nature.
Hence, from the average atomic mass of carbon, we can see that there is not enough information to determine anything about the relative abundances of the two isotopes.
Learn more about isotopes:https://brainly.com/question/11680817
#SPJ1
Answer: Carbon-12 is more abundant than carbon —13 because the average atomic mass is closer to the mass of carbon —12
Explanation: took the test and got it right
How many grams of aluminum phosphate is produced from 7.5 g of lithium phosphate in this balanced equation? 2Li3PO4 + Al2(SO4)3 = 3Li2SO4 + 2AlPO4
7.8049856 g of aluminium phosphate is produced from 7.5 g of lithium phosphate in this balanced equation.
What are moles?A mole is defined as 6.02214076 × [tex]10^{23}[/tex] of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
Given data:
[tex]2Li_3PO_4 + Al_2(SO_4)_3[/tex]→ [tex]3Li_2SO_4 + 2AlPO_4[/tex]
Moles of 7.5 g of lithium phosphate.
The molar mass of lithium phosphate is 115.79 g/mol.
Moles = [tex]\frac{mass}{molar \;mass}[/tex]
Moles =[tex]\frac{7.5 g}{115.79 g/mol}[/tex]
Moles = [tex]\frac{7.5 g}{115.79 g/mol}[/tex]
Moles = 0.06477243285
Now we will compare the moles of [tex]AlPO_4[/tex] with [tex]Li_3PO_4[/tex].
[tex]Li_3PO_4[/tex] : [tex]AlPO_4[/tex]
2 : 2
0.385 : 2÷2× 0.064 = 0.064 mol
Mass of [tex]AlPO_4[/tex] :
Mass of [tex]AlPO_4[/tex] = moles × molar mass
Mass of [tex]AlPO_4[/tex] =0.064 mol × 121.9529 g/mol
Mass of [tex]AlPO_4[/tex] = 7.8049856 g
Hence, 7.8049856 g of aluminium phosphate is produced from 7.5 g of lithium phosphate in this balanced equation.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
Increased concentrations of alpha-fetoprotein (AFP) in adults are most characteristically associated with:
Concentrations of alpha-fetoprotein (AFP):
Increased concentrations of alpha-fetoprotein (AFP) in adults are most characteristically associated with Hepatocellular carcinoma.
Alpha Fetoprotein (AFP):
It is a protein produced in a developing baby's liver. When a newborn is born, their AFP levels are typically high, but by the time they turn one, they are quite low. AFP levels in healthy persons should be extremely low. For adults, a typical AFP level ranges from 10 ng/mL to 20 ng/mL.
In reaction to cancer in the body, normal or cancerous cells produce chemicals known as tumor markers. High levels of AFP can indicate noncancerous liver illnesses such as cirrhosis and hepatitis as well as cancers of the testicles, ovaries, or liver.
Thus, one of the risk factors for Hepatocellular carcinoma has been proven to be a persistent increase in AFP serum levels.
Learn more about the carcinoma here,
https://brainly.com/question/19043156
#SPJ4
Guanine pairs with cytosine using ______ noncovalent hydrogen bonds, while adenine pairs with thymidine using ______ noncovalent hydrogen bonds. Multiple choice question. two; two
Guanine pairs with cytosine using three noncovalent hydrogen bonds, while adenine pairs with thymidine using two noncovalent hydrogen bonds.
Why does cytosine and guanine have 3 hydrogen bonds?Cytosine and guanine are joined by three hydrogen bonds. The Watson and Crick bases differ from one another in strength as a result. Thymine and adenine bonded base pairs in DNA are weaker than guanine and cytosine bonded base pairs. Size and structure of the specific nucleotides cause Adenine and Thymine to always pair together while Cytosine and Guanine always pair together.
Adenine and thymine can make two hydrogen bonds, while cytosine and guanine can form three hydrogen bonds. Or, to put it more simply, A and G form bonds. Because each base can only link with one other base, the process is known as complementary base pairing.
Learn more about hydrogen bonds here:
brainly.com/question/9790513
#SPJ4
Hello! So I need help with these neutralization reactions and its fill in the blank. The question asks,
Balance the following neutralization reactions:
_______ HBr + _______ KOH _______KBr + _______H2O
_______ HF + _______ Fe(OH)3 _______FeF3 + ______ H2O
______HCl + _______ Ca(OH)2 _______CaCl2 + ______ H2O
The balanced equation for the neutralization reactions is as below.
Balancing chemical reaction equationsIn order for chemical equations to be balanced, the number of atoms of each element before and after the reaction must be equal.
Thus:
[tex]HBr + KOH --- > KBr + H_2O[/tex][tex]3HF + Fe(OH)_3 --- > 3 H_2O + FeF_3[/tex][tex]2HCl + Ca(OH)_2 --- > CaCl_2 + 2H_2O[/tex]More on balancing chemical equations can be found here: https://brainly.com/question/15052184
#SPJ1
what piece of glassware (beaker, flask, graduated cylinder ) should be used to accurately measure out liquids? justify your answer
Answer:
graduated cylinder
Explanation:
that is the most accurate one of the 3. The lines on a beaker or flask are just indicative.
Pt 2. Chem Reactions 50 PTS
Hey, I need help with Chemistry. Please also provide an explanation as well!!
The red colour is the limiting reactant.
Red-blue colour ball and two white balls attached together are reactants.
Red-blue colour ball and two white and one red colour ball attached to each other are products.
What is a limiting reagent?The reactant that is entirely used up in a reaction is called a limiting reagent.
A reactant is a substance that is present at the start of a chemical reaction. The substance(s) to the right of the arrow are called products.
A product is a substance that is present at the end of a chemical reaction.
Hence,
The red colour is the limiting reactant.
Red-blue colour ball and two white balls attached together are reactants.
Red-blue colour ball and two white and one red colour ball attached to each other are products.
Learn more about limiting reagents here:
brainly.com/question/26905271
#SPJ1
What volume is occupied by 9.50 g c6h12 at stp (standard temperature and pressure)?
Molar mass
6(12)+12(1)7(12)84g/molNo of moles
Given mass/Molar mass9.5/840.113molVolume
22.4L(0.113)2.5LWhat volume (in mL) of 0.108 M aluminum hydroxide is required to neutralize 30.00 mL of 0.175 M nitric acid
The volume of aluminum hydroxide required for neutralization is 24.30 mL.
Acid and base:
The compounds which gives H+ ions in the aqueous solution are called acids while those which gives OH- ions are called base.
Neutralization reaction:
It is a chemical reaction that involves a reaction between the equal molar amount of acid and base and form a solution that has pH = 7.
Calculations:
The reaction between aluminum hydroxide and nitric acid is expressed as:
Al(OH)2 + 2HNO3 ----> Al(NO3)2 + 2H2O
The number of moles of nitric acid is calculated as:
Moles of HNO3 = 0.175 M x (30.00/1000) L = 0.00525 mol
The number of moles of Al(OH)2 required for the neutralization is:
Moles of Al(OH)2 = 0.00525 mol/2 = 0.002625 mol
The volume of Al(OH)2 is calculated as:
Volume = 0.002625 mol/0.108 M = 0.0243 L = 24.30 mL
Learn more about neutralization reaction here:
https://brainly.com/question/20038776
#SPJ4
Perform an online search to find the structures of the compounds in the questions that follow. Provide a method for separating the mixtures of two or three compounds, dissolved in a solvent diethyl ether. In each case one of the components will be a neutral compound. You should give your answer in the form of a flow chart.
a) Benzophenone and tributylamine
b) 4-Bromoaniline, 3-nitrobenzoic acid, and benzoin
c) Fluorenone, octanoic acid, and dicyclohexylamine
d) 1-Hexanol and 4-bromoaniline
The chemical separation method for two of the above named mixtures or compound indicated above are explained below.
What is a Chemical compound?A chemical compound is a material generated by the chemical union of two or more elements in set quantities.
What are the separation methods?Benzophenone and tributylamine
The combination of benzophenone and tributylamine is in diethyl ether (given in question). Tributylamine is a base that may readily be changed to a water soluble salt by adding an aqueous acid.
Add dilute aqueous acid to the solution. The amine salt will be present in the aqueous layer, whereas benzophenone will be present in the ether layer. A separatory funnel will isolate levels.
Fluorenone, octanoic acid, and dicyclohexylamine
Fluorenone, Octanoic acid, and dicyclohexyl amine: The combination comprises both an acid (octanoic acid) and a base (dicyclohexyl amine) (dicyclohexyl amine).
Add the diluted aqueous base to the solution (like NaCO3). Divide the two layers.
The acid is present in the aqueous layer as a salt, while the fluorenone and amine are present in the ether layer.
Add weak aqueous acid to this combination of fluorenone and dicyclohexyl amine.
Divide the two layers. The amine is present in the aqueous layer, and fluorenone is present in the ether.
Learn more about chemical separation at;
https://brainly.com/question/17143033
#SPJ1
A solution of 0.600m hcl is used to titrate 15.00 ml of koh solution. the endpoint of
titration is reached after the addition of 27.13 ml of hci. what is the concentration of
the koh solution?
9.000m
o 1.09m
o 0.332m
0 0.0163m
The final concentration is 0.332 M.
Calculation:Here, dilution formula is used,
The concentration of a solution is lowered by the process of dilution. This is commonly accomplished by increasing the solvent content of the solution, which lowers the moles per liter.
M₁V₁ = M₂V₂
where,
M₁ = Initial concentration
V₁ = Initial volume
M₂ = Final concentration
V₂ = Final volume
Given,
M₁ = 0.600 M
V₁ = 15.00 mL
V₂ = 27.13
To calculate,
M₂ =?
Put the given values in the above formula,
M₁V₁ = M₂V₂
0.600 × 15.00 = M₂ × 27.13
9 = M₂ × 27.13
M₂ = 9/27.13
M₂ = 0.332 M
Therefore the final concentration is 0.332 M.
Learn more about dilution formula here:
https://brainly.com/question/7208546
#SPJ4
A woman walks into a carpet store wearing high-heeled shoes with a circular heel of diameter 0.987 cm. To the dismay of the store manager, she balances on one heel on an expensive carpet sample. If she has a mass of 45.5 kg, determine the pressure she exerts on the carpet sample.
The pressure she exerts on the carpet sample:-5.8279 MPa
Calculation of Pressure exerted on the carpet:-P = F/A
Where,
F= Force
A = Area
Given that;
d= 0.987 cm =0.987 x 10^-2 m
m= 45.5 kg
Area = πr^2= (π(0.987 x 10^-2)^2/2)
=7.6511 x 10^-5 square meter
Force= mg
= 45.5 x 9.8
=445.9 N
Pressure = force/ area
=445.9/7.6511 x 10^-5
=5.8279 MPa
The pressure she exerts on the carpet sample:-5.8279 MPa
Learn more about Pressure here:-
https://brainly.com/question/13502302
#SPJ4
How many unique tripeptides can be formed from 1 serine residue, 1 threonine residue, and 1 isoleucine residue
Answer:
6 (STI, SIT, TIS, ITS, IST
Element Z has the following properties: a. silvery-white solid at room temperature b. malleable c. used as a catalyst d. conducts electricity
Element Z can be classified as a metal and will be found to the left of the zigzag line of the periodic table.
Hence, option 3 is correct answer.
What is Metal and Non metal ?Metals are solid at room temperature. Metals are malleable. Metals loses electrons easily. Metal are less electronegative. Non metals are non malleable. Non metals cannot loses electron. Non metals are more electronegative.
What is Zig-Zag line in periodic table ?The Zig-Zag line called the amphoteric line, the semimetal line, the metal non metal line, the stair case and the metalloid line on the periodic table separates the metals from the non metals.
Thus from the above conclusion we can say that Element Z can be classified as a metal and will be found to the left of the zigzag line of the periodic table.
Hence, option 3 is correct answer.
Learn more about the Metal and Non-metal here: https://brainly.com/question/4701542
#SPJ4
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Question: Element Z has the following properties:
a. silvery-white solid at room temperature
b. malleable
c. used as a catalyst
d. conducts electricity
Element Z can be classified as a _________ and will be found ________ the zigzag line of the periodic table.
(1) non-metal; along side of
(2) metal; along side of
(3) metal; to the left of
(4) metalloid, along side of
(5) non-metal; to the right of
Option 3 is correct
Element Z can be classified as a metal and will be found to the left of the zigzag line of the periodic table.
As the element Z conducts electricity, so it is a metal.
Metals can be hammered, crushed, or rolled into thin sheets without breaking due to a feature known as malleability.
As the given element Z is malleable, so it is a metal.
Most transition metals are also used as catalyst because they can activate other compounds by adsorbing them to their surface. As the element Z is used as catalyst, so it is metal.
Some other physical properties of metals are :
1) They are also good conductor of heat.
2) Highly ductile
3) They are lustrous
4) They are sonorous
Metals are present on the left side of the zig-zag line (the line that separates metals and non metals) whereas non-metals are present on the right side of this line.
As the Element Z is metal on the basis of the given properties left side of the zig-zag line, so it will be found to the left of the zigzag line of the periodic table.
Hence option (3) is correct
Learn more about properties of metals and non-metals here
https://brainly.com/question/398038
#SPJ4
What is the oxidation state of cobalt (III)?
The oxidation state of cobalt (III) is: +3
Meaning of Oxidation stateOxidation state can also be referred to as oxidation number.
Oxidation state can be defined as total number of electrons that an atom must either loose or gain for it to form a chemical bond with another atom.
In conclusion, The oxidation state of cobalt (III) is: +3
Learn more about Oxidation state: https://brainly.com/question/8990767
#SPJ1