if a certain silver wire has a resistance of 6.00 ohms at 20 degrees, what is the resistance at 34 degrees

Electromagnetic Wave - oscillating electric charge

Radar - tracking storms

c            - Velocity of light

Photon - behaves as a particle

infrared waves - TV remote control

Frequency - Wavelength

ultraviolet waves - sun burn

Microwaves - Cooking Food

CRT - Television

pager - unique identification number

moving electric field - moving magnetic field

carrier wave - frequency modulation

In physics, electromagnetic radiation (EMR) is made up of electromagnetic (EM) field waves that travel across space carrying velocity and electromagnetic radiant energy. Radio waves, microwaves, infrared, (visible) light, ultraviolet, X-rays, and gamma rays are all examples of electromagnetic radiation.

To know more about microwave :

https://brainly.com/question/15708046

#SPJ1.

The average temperature of the bar would be (15+30)/2 = 22.5 degrees C. To calculate the average temperature, temperature readings are taken at regular intervals, such as hourly or daily, and then the sum of all the readings is divided by the total number of readings taken.

The average temperature of the bar can be found by taking the average of the temperatures at the two ends.  
The temperature of a 10 m long metal bar increases linearly from 15 degrees C at the cooler end to 30 degrees C at the hotter end. To find the average temperature, simply calculate the midpoint between the two temperatures.

Average temperature = (15 + 30) / 2 = 45 / 2 = 22.5 degrees C
The average temperature of the bar is 22.5 degrees C.

Learn more about average temperature here:

https://brainly.com/question/26412728

#SPJ11

A decomposition reaction is a type of chemical reaction in which a single compound is broken down into two or more simpler substances. This process occurs when a molecule is broken down into smaller components, which may be elements or other compounds.

The reaction is often accompanied by the release of energy in the form of heat. This is because breaking the chemical bonds between the atoms in the molecule requires energy input, and when those bonds are broken, energy is released. Decomposition reactions can occur spontaneously or be initiated by the input of energy, such as heat, light, or electricity. Examples of common decomposition reactions include the breakdown of hydrogen peroxide into water and oxygen gas, or the thermal decomposition of calcium carbonate into calcium oxide and carbon dioxide gas.

Learn more about decomposition reaction

https://brainly.com/question/16987748

#SPJ4

a) The acceleration due to gravity at the surface of Mars is 0.38 times the acceleration due to gravity at the surface of Earth.

b) The weight of the Sojourner on the surface of Mars is 4.37 N.

c) The minimum normal force that must be supplied by the ramp is 43.4 N.

a) The acceleration due to gravity at the surface of Mars in terms of g can be calculated using the formula:

g = G * M / r^2

where G is the gravitational constant, M is the mass of Mars, and r is the radius of Mars. Using the given data, we have:

Radius of Mars = 0.53 x Radius of Earth

Mass of Mars = 0.11 x Mass of Earth

Substituting these values into the formula, we get:

g = G * (0.11 x Mass of Earth) / (0.53 x Radius of Earth)^2

g = 0.38 g

Therefore, the acceleration due to gravity at the surface of Mars is 0.38 times the acceleration due to gravity at the surface of Earth.

b) The weight of the Sojourner on the surface of Mars can be calculated using the formula:

Weight = Mass * g

where Mass is the mass of the Sojourner and g is the acceleration due to gravity at the surface of Mars. Substituting the given values, we get:

Weight = 11.5 kg * 0.38 g

Weight = 4.37 N

Therefore, the weight of the Sojourner on the surface of Mars is 4.37 N.

c) The minimum normal force that must be supplied by the ramp can be calculated using the formula:

N = mg / cos(theta)

where m is the mass of the Sojourner, g is the acceleration due to gravity at the surface of Mars, and theta is the angle of inclination of the ramp. Substituting the given values, we get:

N = 11.5 kg * 0.38 g / cos(20 degrees)

N = 43.4 N

Therefore, the minimum normal force that must be supplied by the ramp is 43.4 N.

d) If the Sojourner is traveling at a constant velocity on the Martian surface, the net force on it must be zero, since there is no acceleration. Therefore, the driving force must be balanced by the resistive forces, such as friction and atmospheric drag.

e) The maximum distance that the Sojourner can travel on a horizontal Martian surface using its stored energy can be calculated using the formula:

Distance = Energy Available / Power Required

Substituting the given values, we get:

Distance = 5.4 x 10^5 J / 10 W

Distance = 54000 m

Therefore, the maximum distance that the Sojourner can travel on a horizontal Martian surface using its stored energy is 54000 meters.

f) The magnitude of the drag force can be calculated using the formula:

Drag Force = 0.0001 * Power Required

Substituting the given values, we get:

Drag Force = 0.0001 * 10 W

Drag Force = 0.001 N

Therefore, the magnitude of the drag force is 0.001 N.

For more such questions on Sojourner.

https://brainly.com/question/14914686#

#SPJ11

The length of the triangular load is 4.57 m and its position on the beam is 2.59 m from the left end, such that the equivalent result force is zero and the resultant couple moment is 8 kNm clockwise.

According to this principle, the sum of the moments of all the forces acting on a body is equal to the moment of the resultant force. In this case, we want to find the position and length of the triangular load such that the equivalent result force is zero and the resultant couple moment is 8 kNm clockwise.

First, we need to draw a free-body diagram of the beam with the triangular load. We can assume that the triangular load acts at a distance of a from the left end of the beam, and has a length of b. We can also assume that the weight of the beam is negligible.

Next, we can write down the moment equations for the beam. Taking moments about the left end of the beam, we have: Ma - (1/2)(b)(w)(a + (1/3)b) = -8 kNm where Ma is the moment due to any other forces acting on the beam, w is the weight of the load per unit length, and (1/2)(b)(w)(a + (1/3)b) is the moment due to the triangular load.

Since we want the equivalent result force to be zero, we can set the sum of the forces acting on the beam to zero. This gives us: [tex]w(b/2)(a + (2/3)b) = w(b/2)(b/3) = Ma[/tex]

Therefore, we can substitute Ma in the moment equation to get:

[tex]w(b/2)(a + (2/3)b) - (1/2)(b)(w)(a + (1/3)b) = -8 kNm[/tex] Solving for b and a, we get: b = 4.57 m and a = 2.59 m

Therefore, the length of the triangular load is 4.57 m and its position on the beam is 2.59 m from the left end.

Know more about couple moment here:

https://brainly.com/question/30720777

#SPJ11

We need to do 17,799 repetitions to burn off 150 Calories during this workout if weight of barbell is 6.2 Kg.

We need to calculate the work done during each repetition and then determine how many repetitions are needed to burn off 150 Calories.
First, let's find the work done during each repetition:
Work = Force x Distance
Force = Mass x Acceleration due to gravity (9.81 m/s²)
Force = 6.2 kg x 9.81 m/s² ≈ 60.82 N
Now, let's calculate the work:
Work = 60.82 N x 0.58 m ≈ 35.28 J (Joules)
Next, we need to convert 150 Calories to Joules:
1 Calorie = 4.184 kJ (kilojoules)
150 Calories = 150 x 4.184 kJ = 627.6 kJ = 627,600 J
Now, we can calculate the number of repetitions needed:
Number of repetitions = Total energy to burn / Energy burned per repetition
Number of repetitions = 627,600 J / 35.28 J ≈ 17,798.86
Since we need to round up to the nearest rep, the answer is 17,799 repetitions to burn off 150 Calories during this workout.

Learn more about Acceleration :

https://brainly.com/question/12550364

#SPJ11

We need to do 17,799 repetitions to burn off 150 Calories during this workout if weight of barbell is 6.2 Kg.

We need to calculate the work done during each repetition and then determine how many repetitions are needed to burn off 150 Calories.
First, let's find the work done during each repetition:
Work = Force x Distance
Force = Mass x Acceleration due to gravity (9.81 m/s²)
Force = 6.2 kg x 9.81 m/s² ≈ 60.82 N
Now, let's calculate the work:
Work = 60.82 N x 0.58 m ≈ 35.28 J (Joules)
Next, we need to convert 150 Calories to Joules:
1 Calorie = 4.184 kJ (kilojoules)
150 Calories = 150 x 4.184 kJ = 627.6 kJ = 627,600 J
Now, we can calculate the number of repetitions needed:
Number of repetitions = Total energy to burn / Energy burned per repetition
Number of repetitions = 627,600 J / 35.28 J ≈ 17,798.86
Since we need to round up to the nearest rep, the answer is 17,799 repetitions to burn off 150 Calories during this workout.

Learn more about Acceleration :

https://brainly.com/question/12550364

#SPJ11

The most severe flight hazard caused by wingtip vortices of the greatest strength in a large jet airplane typically occurs during low-speed, high-angle of attack conditions, such as during takeoff and landing.

In these situations, the airplane generates a large amount of lift, which in turn produces strong wingtip vortices, potentially posing a risk to nearby aircraft.
One of the key factors that determines the strength of wingtip vortices is the weight of the aircraft. Heavier planes tend to create stronger vortices, which can be particularly hazardous during takeoff and landing when other aircraft may be in close proximity.
Another important factor is the speed of the aircraft. When planes are flying at low speeds, such as during takeoff or landing, the vortices tend to be more intense and longer-lasting than at higher speeds.
Finally, weather conditions can also play a role in the severity of wingtip vortices.

To know more about speed visit :-

https://brainly.com/question/28224010
#SPJ11

a) Emf developed is 0.0225 V ;  b) Magnitude of electric field felt by electrons in the rod is 0.161 V/m ;  c) Direction of electric field felt by electrons in the rod is up.

A magnetic field is a force field that is generated by the motion of electric charges.

As we know, Emf = BLv

B is magnetic field strength, L is length of the conductor, and v is velocity.

a) Emf = (0.810 T) * (0.14 m) * (0.195 m/s) = 0.0225 V

Therefore, emf developed is 0.0225 V.

b) As emf = E*L

E is electric field strength and L is length of the conductor.

E = emf/L

E = 0.0225 V / 0.14 m = 0.161 V/m

Therefore, magnitude of electric field felt by electrons in rod is calculated as 0.161 V/m.

c) In this case, the motion of the conductor is to the right, the magnetic field is into the page (since the problem doesn't specify the direction, we can assume it is perpendicular to the plane of the page), so the induced current and the electric field will be in the direction pointed by the middle finger, which is up.

So, electric field felt by electrons in the rod is in up direction.

To know more about magnetic field, refer

https://brainly.com/question/14411049

#SPJ1

The probe's Mach number of its initial speed is 15,000 km/h is 94.7.

To calculate the probe's Mach number when its initial speed is 15,000 km/h and the speed of sound on the planet is 44 m/s, we first need to convert the probe's speed to meters per second (m/s).

1 km/h = 1000 m / 3600 s

15,000 km/h = 15,000 * (1000/3600) m/s

= 4166.67 m/s

Now we can find the Mach number:

Mach number = Probe's speed / Speed of sound

Mach number = 4166.67 m/s / 44 m/s

= 94.7

So, the probe's Mach number is 94.7 when its initial speed is 15,000 km/h in the thin atmosphere of the planet where the speed of sound is 44 m/s.

Learn more about probe: https://brainly.com/question/15039118

#SPJ11

The rate at which the current in the inductor must change to induce an emf of 1000 V is 10,000 A/s. The correct answer is (d) 10,000 A/s.

To determine the rate of change of current required to induce an emf of 1000 V in a 100-mH inductor, we can use the formula:
emf = L × [tex]\frac{dI}{dt}[/tex]

An electromotive force is an EMF. It is the amount of energy that an energy source, like a battery or an electric generator, imparts per unit of electric charge. The device has two terminals, one of which is positive and the other negative. When no current flows, it is also known as terminal potential difference.
Where emf is the electromotive force, L is the inductance, dI is the change in current, and dt is the change in time. In this case, emf = 1000 V and L = 100 mH (0.1 H). We need to find (dI/dt).
Rearranging the formula to solve for (dI/dt):
[tex]\frac{dI}{dt}[/tex] = emf / L
Now, plug in the given values:
[tex]\frac{dI}{dt}[/tex] = 1000 V / 0.1 H
[tex]\frac{dI}{dt}[/tex] = 10,000 A/s
So, emf =10000 A/s

Learn more about electromotive force here

https://brainly.com/question/24182555

#SPJ11

The rate at which the current in the inductor must change to induce an emf of 1000 V is 10,000 A/s. The correct answer is (d) 10,000 A/s.

To determine the rate of change of current required to induce an emf of 1000 V in a 100-mH inductor, we can use the formula:
emf = L × [tex]\frac{dI}{dt}[/tex]

An electromotive force is an EMF. It is the amount of energy that an energy source, like a battery or an electric generator, imparts per unit of electric charge. The device has two terminals, one of which is positive and the other negative. When no current flows, it is also known as terminal potential difference.
Where emf is the electromotive force, L is the inductance, dI is the change in current, and dt is the change in time. In this case, emf = 1000 V and L = 100 mH (0.1 H). We need to find (dI/dt).
Rearranging the formula to solve for (dI/dt):
[tex]\frac{dI}{dt}[/tex] = emf / L
Now, plug in the given values:
[tex]\frac{dI}{dt}[/tex] = 1000 V / 0.1 H
[tex]\frac{dI}{dt}[/tex] = 10,000 A/s
So, emf =10000 A/s

Learn more about electromotive force here

https://brainly.com/question/24182555

#SPJ11

The wavelength changes by a factor of 0.86, or 86%.

What is Wavelength?

Wavelength refers to the distance between two consecutive points on a wave that are in phase, or in other words, the distance between two similar points on a wave that are at the same point in their cycle. It is commonly denoted by the symbol "λ" (lambda) and is typically measured in meters (m) or other units of length.

If the wave speed decreases from c to 0.86c, we can use the formula for the wavelength of a wave to calculate the change in wavelength. The formula is:

λ' = λ * (v' / v)

where λ' is the new wavelength, λ is the original wavelength, v' is the new wave speed, and v is the original wave speed.

Plugging in the given values:

λ' = λ * (0.86c / c)

Simplifying:

λ' = λ * 0.86

The wavelength of a wave is inversely proportional to its wave speed, so if the wave speed decreases, the wavelength will also decrease.

Learn more about Wavelength from the given link

https://brainly.com/question/10750459

#SPJ1

The force of friction that must be overcome if i push with 20N force down on the box at a 45 degree angle is 19.29 N.

To determine the force of friction that must be overcome, we need to first calculate the normal force and the horizontal pushing force. Since you're pushing down at a 45-degree angle, we can use trigonometry to split the applied force into its horizontal and vertical components.
Given:
Applied force (F) = 20 N
Angle (θ) = 45 degrees
Box weight (W) = 10 kg
Coefficient of friction (µ) = 0.23
First, we find the horizontal and vertical components of the applied force:
Horizontal component (Fx) = F * cos(θ) = 20 * cos(45) ≈ 14.14 N
Vertical component (Fy) = F * sin(θ) = 20 * sin(45) ≈ 14.14 N
Next, we calculate the gravitational force acting on the box:
Gravitational force (Fg) = mass * gravity = 10 kg * 9.8 m/s² = 98 N
Now, we find the net normal force (Fn):
Fn = Fg - Fy = 98 N - 14.14 N ≈ 83.86 N
Finally, we determine the force of friction (Ff):
Ff = µ * Fn = 0.23 * 83.86 N ≈ 19.29 N
So, the force of friction that must be overcome is approximately 19.29 N.

To know more about friction please refer: https://brainly.com/question/13000653

#SPJ11

The force of friction that must be overcome if i push with 20N force down on the box at a 45 degree angle is 19.29 N.

To determine the force of friction that must be overcome, we need to first calculate the normal force and the horizontal pushing force. Since you're pushing down at a 45-degree angle, we can use trigonometry to split the applied force into its horizontal and vertical components.
Given:
Applied force (F) = 20 N
Angle (θ) = 45 degrees
Box weight (W) = 10 kg
Coefficient of friction (µ) = 0.23
First, we find the horizontal and vertical components of the applied force:
Horizontal component (Fx) = F * cos(θ) = 20 * cos(45) ≈ 14.14 N
Vertical component (Fy) = F * sin(θ) = 20 * sin(45) ≈ 14.14 N
Next, we calculate the gravitational force acting on the box:
Gravitational force (Fg) = mass * gravity = 10 kg * 9.8 m/s² = 98 N
Now, we find the net normal force (Fn):
Fn = Fg - Fy = 98 N - 14.14 N ≈ 83.86 N
Finally, we determine the force of friction (Ff):
Ff = µ * Fn = 0.23 * 83.86 N ≈ 19.29 N
So, the force of friction that must be overcome is approximately 19.29 N.

To know more about friction please refer: https://brainly.com/question/13000653

#SPJ11

The driver produces a torque of 26.5 N-m while changing the flat tire using a tire iron 50.0 cm long and exerting a force of 53.0 N.

To calculate the torque produced by the driver when changing a flat tire using a tire iron 50.0 cm long and exerting a force of 53.0 N, you can follow these steps:

Step 1: Convert the length of the tire iron from centimeters to meters.
1 meter = 100 centimeters
50.0 cm = 50.0 / 100 = 0.5 meters

Step 2: Determine the angle between the force applied and the tire iron. Since the driver is applying the force perpendicularly to the tire iron, the angle is 90 degrees.

Step 3: Calculate the torque.
Torque (τ) = Force (F) × Distance (d) × sin(θ)
where θ is the angle between the force and the tire iron.

Step 4: Plug in the values.
τ = 53.0 N × 0.5 meters × sin(90°)

Step 5: Calculate sin(90°).
sin(90°) = 1

Step 6: Multiply the values.
τ = 53.0 N × 0.5 meters × 1
τ = 26.5 N-m

The driver produces a torque of 26.5 N-m while changing the flat tire using a tire iron 50.0 cm long and exerting a force of 53.0 N.

To know more about torque refer here:

https://brainly.com/question/29024338#

#SPJ11

Three books (X, Y, and Z) rest on a table, the force of book Z on book Y is 5N. Therefore, the correct answer is (B)

To determine the force of book Z on book Y, we need to consider the gravitational force acting on book Y due to book Z.

This force is equal to the weight of book Y times the gravitational acceleration, which is 9.8 m/s^2.

The weight of book Y is given as 5N, so the force of book Z on book Y is:F = 5N * 9.8 m/s^2 = 49N

However, the weight of book Z is given as 10N, which is greater than the force it exerts on book Y.

This means that book Z is not heavy enough to lift book Y off the table, and the force of book Z on book Y is simply the weight of book Y, which is 5N.

Therefore, the correct answer is (B)

To know more about force, click here.

https://brainly.com/question/13191643

#SPJ4

If you plug your hair dryer with resistance obeying Ohm's law into a 240-V outlet in Europe when it's designed for 120-V outlets in the United States, its power output would increase by a factor of 4, which could potentially damage the hair dryer or cause it to malfunction.

Assuming that the resistance of your hair dryer obeys Ohm's Law, if you plug it into a 240-V outlet in Europe while it's designed for 120-V outlets in the United States, the power output would increase.

1. Ohm's Law states that Voltage (V) = Current (I) x Resistance (R). In this case, the resistance (R) of your hair dryer remains constant.
2. The original voltage designed for the hair dryer is 120 V. Let's call the original current I1. So, 120 = I1 x R.
3. When you plug the hair dryer into a 240-V outlet, the voltage doubles. Let's call the new current I2. So, 240 = I2 x R.
4. From steps 2 and 3, we can deduce that I2 = 2 x I1 since the voltage doubled.
5. The power output (P) can be calculated as P = V x I. The original power output is P1 = 120 x I1, and the new power output is P2 = 240 x I2.
6. Substituting I2 = 2 x I1 into the equation for P2, we get P2 = 240 x (2 x I1) = 480 x I1.
7. Comparing P1 and P2, we can see that P2 = 4 x P1.

So, if you plug your hair dryer into a 240-V outlet in Europe when it's designed for 120-V outlets in the United States, its power output would increase by a factor of 4, which could potentially damage the hair dryer or cause it to malfunction.

Learn more about "Ohm's law": https://brainly.com/question/14296509

#SPJ11

The magnetic flux through the circular loop is 7.95 x 10⁻⁴ Wb.

To find the magnetic flux through a circular loop with a diameter of 4.6 cm, oriented at 56 degrees to a uniform 75 mT magnetic field, follow these steps:

1. Calculate the area (A) of the circular loop using the formula A = πr², where r is the radius (half the diameter): A = π(0.023 m)²≈ 1.66 x 10⁻³ m².

2. Convert the magnetic field (B) from mT to T: B = 75 mT × 10⁻³ = 0.075 T.

3. Calculate the angle (θ) in radians: θ = 56° × (π/180) ≈ 0.977 radians.

4. Use the magnetic flux (Φ) formula: Φ = B × A × cos(θ).

5. Calculate the magnetic flux: Φ = 0.075 T × 1.66 x 10⁻³ m² × cos(0.977) ≈ 7.95 x 10⁻⁴ Wb.

To know more about magnetic flux click on below link:

https://brainly.com/question/24214683#

#SPJ11

Answer:

I believe it is C but I could be wrong

Explanation:

From the picture it shows the eco/voice coming from room to room. I hope this helped have a wonderful day or night!

The angular speed at the time t/2 is half of the angular speed at time t.

Calculation of the angular speed:

1: If the angular speed of the object is ω after the time t, its angular displacement can be calculated as θ = ωt. Therefore, at the time t/2, the angular displacement would be θ/2 = (ωt)/2 = (1/2)ωt.

Step 2: The formula for angular velocity, which is given by ω = Δθ/Δt, where Δθ is the change in angular displacement and Δt is the change in time
ω = Δθ/Δt
ω = [(1/2)ωt - 0]/[t/2 - 0]
ω = (1/2)ωt / (t/2)
ω = (1/2)ω
Hence, the angular speed at the time t/2 is half of the angular speed at time t.

Learn more about angular speed:

https://brainly.com/question/14001220

#SPJ11

Answer:The longest wavelength of light that could be emitted by an electron in a hydrogen atom transitioning directly to the ground state is approximately 121.5 nm.

Explanation:To determine the longest wavelength of light emitted by an electron in a hydrogen atom transitioning directly to the ground state, we'll use the Rydberg formula:

1/λ = R_H * (1/n1² - 1/n2²)

Where λ is the wavelength, R_H is the Rydberg constant for hydrogen (approximately 1.097 x 10^7 m⁻¹), n1 and n2 are the principal quantum numbers of the initial and final energy levels, respectively.

For the longest wavelength, we need the smallest possible energy difference, which occurs when an electron transitions from the second energy level (n2 = 2) to the ground state (n1 = 1).

1/λ = R_H * (1/1² - 1/2²) = R_H * (1 - 1/4) = R_H * 3/4

Now, to find λ:

λ = 1/(R_H * 3/4) = 4/(3 * R_H) ≈ 4/(3 * 1.097 x 10^7 m⁻¹) ≈ 1.215 x 10^-7 m

Converting to nanometers (nm):

λ ≈ 1.215 x 10^-7 m * (10^9 nm/m) ≈ 121.5 nm

Hence, The longest wavelength of light that could be emitted by an electron in a hydrogen atom transitioning directly to the ground state is approximately 121.5 nm.

Learn more about wavelength: brainly.com/question/31143857

#SPJ11

Answer: The speed of the airliner is approximately 258.2 m/s.

Explanation: We can use the formula for kinetic energy:

K.E. = 1/2mv^2

where K.E. is the kinetic energy, m is the mass, and v is the velocity (speed).

Rearranging the formula to solve for v, we get:

v = sqrt(2K.E./m)

Substituting the given values, we get:

v = sqrt(2(2x10^9 J)/(6x10^4 kg))

v = sqrt(66666.67 m^2/s^2)

v ≈ 258.2 m/s

The x-component of the 1 kg object's velocity just after the collision is 4.5 m/s.

To find the x-component of the 1 kg object's velocity just after the collision, we will use the conservation of momentum principle. Here's a step-by-step explanation:

1. Calculate the initial momentum of the 2 kg object:

p1_initial = m1 * v1_initial = 2 kg * 3 m/s = 6 kg*m/s.

2. Calculate the final momentum of the 2 kg object:

p1_final = m1 * v1_final = 2 kg * 1.5 m/s = 3 kg*m/s.

3. Find the x-component of the final momentum of the 2 kg object using the angle given:

p1_final_x = p1_final * cos(60°) = 3 kg*m/s * 0.5 = 1.5 kg*m/s.

4. Apply the conservation of momentum principle in the x-direction:

p1_initial_x = p1_final_x + p2_final_x.

Since the 1 kg object is initially at rest, its initial x-component of momentum is zero.

5. Calculate the x-component of the final momentum of the 1 kg object:

p2_final_x = p1_initial_x - p1_final_x = 6 kg*m/s - 1.5 kg*m/s = 4.5 kg*m/s.

6. Finally, find the x-component of the 1 kg object's velocity just after the collision:

v2_final_x = p2_final_x / m2 = 4.5 kg*m/s / 1 kg = 4.5 m/s.

Learn more about velocity:

https://brainly.com/question/80295?source=archive

#SPJ11

False,

In the method of joints, the moment equilibrium equation can be used at a joint to solve for unknown member forces. However, the method primarily relies on the force equilibrium equations at each joint to determine the unknown member forces.

In the method of joints, the moment equilibrium equation can be used at a joint to solve for unknown member forces, but it is not always necessary to use it. The moment equilibrium equation states that the sum of the moments about a point must be equal to zero, which can be used to determine the unknown forces acting on members that are subject to bending moments.

However, it is important to note that the method of joints primarily makes use of the force equilibrium equations at each joint to determine the unknown member forces. The moment equilibrium equation is only used when necessary to solve for an unknown force.

Visit to know more about Equilibrium:-

brainly.com/question/517289

#SPJ11

a) It takes approximately 3.83 seconds for the truck to stop.
b) The magnitude of the truck's constant acceleration as it slows down is 6.52 m/s^2.

a) To find the time required for the truck to stop, we can use the equation:
v_f = v_i + at

Where v_f is the final velocity (0 m/s, since the truck stops), v_i is the initial velocity (25.0 m/s), a is the acceleration, and t is the time.

First, we need to find the acceleration using the equation:
v_f^2 = v_i^2 + 2as

Where s is the distance traveled (48.0 m). Plugging in the values, we get:
0 = (25.0)^2 + 2a(48.0)

Solving for a:
a = - (25.0)^2 / (2 * 48.0) = -6.52 m/s^2 (rounded to 2 decimal places)

Now, we can find the time using the first equation:
0 = 25.0 + (-6.52)t

Solving for t:
t = 25.0 / 6.52 ≈ 3.83 seconds (rounded to 2 decimal places)

b) The magnitude of the truck's constant acceleration as it slows down is 6.52 m/s^2.

For more such questions on Acceleration.

https://brainly.com/question/13435996#

#SPJ11

A square loop which has 40 turns that are 17 cm on a side, placed in a uniform magnetic field of 0.55 is  1.15 A Current needed.

In order to calculate the current needed to create a maximum torque of 6 Nm for a square loop with 40 turns and 17 cm on a side placed in a uniform magnetic field of 0.55 T, we can use the formula for torque in a current-carrying loop:
Torque (τ) = N × B × A × I × sin(θ)
where N is the number of turns, B is the magnetic field, A is the area of the loop, I is the current, and θ is the angle between the normal to the loop and the magnetic field. For maximum torque, sin(θ) = 1.
Now, let's follow these steps:
1. Calculate the area of the square loop:
A = side × side
A = 0.17 m × 0.17 m
A = 0.0289 m²
2. Substitute the values into the torque formula:
6 Nm = 40 turns× 0.55 T×0.0289 m² × I × 1
3. Solve for the current (I):
I = 6 Nm / (40 turns × 0.55 T ×0.0289 m²)
I = 1.15 A
So, the current needed to create a maximum torque of 6 Nm is approximately 1.15 A.

Learn more about Torque here

https://brainly.com/question/30337233

#SPJ11

The final temperature of air is approximately 198.6°C when it is expanded isentropically from 1000 kPa and 477°C to 100 kPa in a piston-cylinder device.

The final temperature when air is expanded isentropically from 1000 kPa and 477°C to 100 kPa in a piston-cylinder device can be determined using the ideal gas law and the isentropic process equation. The final temperature is approximately 198.6°C.

Initial pressure, P1 = 1000 kPa

Initial temperature, T1 = 477°C

Final pressure, P2 = 100 kPa

Assuming isentropic process, we have:

P1^(γ) / T1 = P2^(γ) / T2

where γ = Cp / Cv is the ratio of specific heats.

For air, Cp = 1.005 kJ/kgK and Cv = 0.718 kJ/kgK at room temperature.

Solving for T2, we get:

T2 = T1 * (P2 / P1)^(γ-1)

Substituting the given values, we get:

T2 = 477 + 273.15 * (100 / 1000)^(1.4-1)

T2 = 471.75 K or 198.6°C (approximately)

Therefore, the final temperature of air is approximately 198.6°C when it is expanded isentropically from 1000 kPa and 477°C to 100 kPa in a piston-cylinder device.

For more questions like Temperature click the link below:

https://brainly.com/question/11464844

#SPJ11

The rate of thermal energy dissipation in the battery can be found using the formula P = I² * r, where P is the power, I is the current (60 A), and r is the internal resistance (0.050 Ω). So, P = (60)² * 0.050 = 3600 * 0.050 = 180 W.  The potential difference will be V = emf + I * r = 12 + (60 * 0.050) = 12 + 3 = 15 V.    (a) The rate of thermal energy dissipation remains the same as in (b), which is 180 W

(a) The potential difference across the terminals can be found using Ohm's Law: V = emf - IR, where V is the potential difference, emf is the electromotive force of the battery, I is the current flowing through the battery, and R is the internal resistance of the battery. Plugging in the given values, we get V = 12 V - (60 A)(0.050 Ω) = 9 V.

(b) The rate at which thermal energy is being dissipated in the battery can be found using the formula: P = I^2R, where P is the power dissipated as thermal energy. Plugging in the given values, we get P = (60 A)^2(0.050 Ω) = 180 W.

(c) The rate at which electric energy is being converted to chemical energy can be found using the formula: P = VI, where P is the power used to charge the battery. Plugging in the given values, we get P = (12 V)(60 A) = 720 W.

(d) When the battery is used to supply 60 A to the starter motor, the potential difference across the terminals will be the same as in part (a), which is 9 V. The rate at which thermal energy is being dissipated in the battery can be found using the same formula as in part (b), since the internal resistance of the battery is the same. Plugging in the given values, we get P = (60 A)^2(0.050 Ω) = 180 W.

Learn more about thermal energy here:

https://brainly.com/question/14668303

#SPJ11

The speed of the 300 g block is 5.57 m/s, and the tension in the 56.0 cm-long string is 16.6 N

To find the speed of the 300 g block and the tension in the 56.0 cm-long string, we can follow these steps:
Step 1: Convert the given values to SI units
Mass (m) = 300 g = 0.3 kg
Length of the string (L) = 56.0 cm = 0.56 m
Angular velocity (ω) = 95.0 rpm = 95 × (2π/60) rad/s = 9.95 rad/s
Step 2: Calculate the linear speed (v) of the block
Use the formula v = ω × r, where r is the radius of the circle (equal to the length of the string)
v = 9.95 rad/s ×0.56 m = 5.57 m/s
Step 3: Calculate the tension (T) in the string
Use the formula T = m ×r × ω²
T = 0.3 kg ×0.56 m × (9.95 rad/s)² = 16.6 N
The speed of the 300 g block is 5.57 m/s, and the tension in the 56.0 cm-long string is 16.6 N.

To learn more about tension https://brainly.com/question/24994188

#SPJ11

The energy associated with the change of orientation of a free electron in a 3.84 T magnetic field is [tex]2.92 × 10^-24 J.[/tex]

The energy associated with flipping the orientation of a free electron in a magnetic field is given by [tex]ΔE = gμBΔmB[/tex] , where g is the electron's g-factor, μB is the Bohr magneton, Δm is the change in the electron's magnetic quantum number, and B is the magnetic field strength. For an electron flipping its orientation from parallel to anti-parallel in a 3.84 T magnetic field, [tex]Δm = 1 and g = 2.0023.[/tex]  Plugging in these values, we get [tex]ΔE = 2.92 × 10^-24 J.[/tex]

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ11

The steady- state value of the angle theta if a) the steady-state value of the angle θ will be 0° in this case, b) the steady-state value of the angle θ in this case will be 90°.

Angle is a geometric concept that describes the relationship between two lines or planes intersecting at a common point. It is measured in degrees and is used in mathematics to define the size, shape, and orientation of objects in space.

a) For a=0: The steady-state value of the angle θ will be 0° in this case. This is because there is no external force (a) acting on the bar, so it will remain in its equilibrium position.

b) For a=g/2: The steady-state value of the angle θ in this case will be 90°. This is because the external force (a) acting on the bar is equal to half of the gravitational force (g) so the bar will pivot and come to a rest in a vertical position.

The value of a for which the steady-state value of theta will be zero is a=0. This is because when there is no external force (a) acting on the bar, it will remain in its equilibrium position.

To learn more about angle

https://brainly.com/question/29506154

#SPJ4

Energy : 3.99keV and Number of photons : 6.47 * 10^9.

We can use the equation E = hc/λ

λ = 0.0305 nm = 0.0305 x 10^-9 m

E = hc/λ = (6.626 x 10^-34 J s)(2.998 x 10^8 m/s)/(0.0305 x 10^-9 m) = 6.41 x 10^-16 J

1 eV = 1.602 x 10^-19 J

E = 6.41 x 10^-16 J x (1 eV/1.602 x 10^-19 J) = 3.99 keV

Therefore, the energy of a single photon of these x-rays is 3.99 keV.

To determine the number of photons absorbed during the dental x-ray, we can use the formula:

number of photons = energy of x-ray / energy of a single photon

4.15 μJ = 4.15 x 10^-6 J

number of photons = 4.15 x 10^-6 J / 6.41 x 10^-16 J = 6.47 x 10^9 photons

Therefore, about 6.47 x 10^9 photons are absorbed during the dental x-ray.

learn more about photons questions,

https://brainly.com/question/30130156

#SPJ11