If 30.5 g of 15% potassium nitrate solution are reacted to excess magnesium chloride how many grams of potassium chloride will be form

Answer:

C. cohesion

Explanation:

The cohesive force between liquid molecules are responsible for the phenomenon known as surface tension

Answer:

2,5,6-trimethyloctane

Explanation:

1) Count the number of carbons in the longest chain. If the structure contains a functional group (e.g. double bond, -OH), they have to be part of the chain that you're counting.

• The straight chain is the longest chain, and it contains 8 carbons

• Without the additional 3 methyl (-CH₃) substituents, it would be called octane (since it is an alkane)

2) Assign location numbers for the substituents, ensuring that they are the lowest possible numbers

• From left to right, we could name it as 2,5,6-trimethyloctane

• From right to left of the parent chain, it would be called 3,4,7-trimethyloctane

• Assigning from left to right gives us the lowest location numbers as the sum of the numbers is 13 instead of 14

• Remember to add 'tri' since we have 3 methyl groups

Answer:

solo esto se responderte

Explanation:

Algunos solutos (por ejemplo, cloruro de sodio (NaCl) en agua) exhiben una solubilidad bastante independiente de la temperatura. Unos pocos, como el sulfato de cerio (III) y el carbonato de litio, se vuelven menos solubles en agua a medida que aumenta la temperatura.

Answer:

Use a catalyst, use more reactants, have a larger reactant surface area, more pressure, higher temperature.

Explanation:

Answer:

limiting reactant gives ................

Answer:

Limiting Reagent or Limiting Reactant

Explanation:

And to assess which reactant is which, we must usually have quantities of each reagent in a chemical reaction...and of course we should write a stoichiometric equation that is balanced with respect to mass and charge in order to assess the stoichiometric equivalence.

We could examine for instance, the combustion of methane gas, the which MAY have cooked your dinner … its combustion reaction is as shown...

[tex]CH_4(g) + 2O_2(g) rarr CO_2(g) + 2H_2O(g) + Delta[/tex]

And here conditions of COMPLETE combustion pertain; there is DIOXYGEN in excess, AND methane is the limiting reagent. A [tex]10*g[/tex] mass of methane represents a molar quantity of …

[tex](10.0*g)/(16.01*g*mol^-1)=0.623*mol[/tex]

And with respect to dioxygen we thus require...

[tex]0.623*mol*32.00*g*mol^-1=40*g[/tex]

...but this quantity (AND MORE) is available from the atmosphere....and the methane was the limiting reagent....

Answer:

B. Wall applies equal reaction force on hand

Explanation:

This is newton's third law. You push something, that something pushes you back with same force. The direction is opposite, so if I push a wall, the wall pushes me back with same force just in opposite direction (so wall towards me). This is why option A is incorrect b/c it says force in same direction as wall. C and D talk about unequal force which is incorrect.

Answer:Wall applies equal reaction force on hand

Explanation:

Answer C

Explanation: the solute will be sugar and the solvent will be water :)

Answer:

In this type of neutralization reaction, the acids and bases are the reactants, since they are the materials that will react to form a new solution. The products are water and salt since they have been created following the reaction.

Explanation:

Neutralization occurs when a strong acid and a strong base come together in a chemical reaction to form water and salt.

In chemistry, acids and bases are measured on the pH scale, which ranges from 0 to 14. Pure water sits in the middle, at a neutral 7. Anything below 7 is an acid, and anything above 7 is a base. Often, solutions are either too acidic or too basic, so a reaction must take place in order to achieve neutralization.

That neutralization leads to the formation of water and salt. In chemistry, salt doesn’t necessarily just mean table salt. It is also a broader term that categorizes the compound that is created in the reaction between an acid and a base.

Answer:

Energy costs are high for many school districts. Therefore, unlimited free power generated by the sun can deliver huge cost savings when compared to grid-generated power. With a modestly sized solar array, cost savings are alike modest.

Explanation:

When an acid reacts in a reaction, it donates hydrogen ion as the only positive ion.

According to Bronsted-Lowry's definition, an acid is a substance that donates hydrogen ions as the only positive ion in reactions.

Following this definition, it can be concluded that when an acid reacts with another substance, it donates one or more hydrogen ions.

A good example is shown in the equation below:

[tex]HCl + KOH --- > KCl + H_2O[/tex]

In the reaction above, HCl donated a hydrogen ion.

More on acids can be found here: https://brainly.com/question/14072179

#SPJ1

Answer:

a

Explanation:

just took the quiz and this is correct.

Answer:

C

Explanation:

Actually, arranged to the size of smallest to least atom radius size = C

Atomic sizes generally get smaller as you go from L to R across a row of the periodic table.

The molarity of a solution that contains 4.9 g of [tex]H_2SO_4[/tex] in 400 ml of solution would be 0.12465 M

Define molarity of a solution.

Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.

Mathematically,

[tex]Molality = \frac{Moles \;solute}{olume \;of \;solution \;in \;litre}[/tex]

Mole of 4.9 g [tex]H_2SO_4[/tex]

= [tex]\frac{mass}{molar \;mass}[/tex]

= [tex]\frac{4.9 g}{98.08}[/tex]

= 0.0499

[tex]Molality = \frac{Moles \;solute}{ olume \;of \;solution \;in \;litre}[/tex]

[tex]Molality = \frac{ 0.0499}{0.4}[/tex]

= 0.12465 M

Hence, the molarity of a solution that contains 4.9 g of [tex]H_2SO_4[/tex] in 400 ml of solution would be 0.12465 M.

Learn more about molarity here:

https://brainly.com/question/3865040

#SPJ1

Remember the relationship

So

The pairs are

And so on

Answer:

Organisms that belong to the same species, form groups, and interact together in the same environment make the level of the population whereas a community has groups of different species living together in an environment. Species are the group of individuals that are genetically related to each other.

19. For the reaction, 2S+ 30=2SO3, how many moles of so3 will be produced from 12.5 g 02 and excess S?

:

For the reaction: 2S(s) + 3O2 -> 2SO2(g) How many moles of SO3 will be produced from 2.0 mol O2 and excess S?

Answer:

Explanation:

19. For the reaction, 2S+ 30=2SO3, how many moles of so3 will be produced from 12.5 g 02 and excess S?

Answer:

the answer is C which says 1 and 2

Answer:

Stage 3 or long-term immersion hypothermia happens after 30 minutes or more. Cold water pulls heat from the body, and the body’s core temperature drops. This eventually leads to loss of consciousness and death.

Answer:

Which half-reaction equation represents reduction?

answer is 2

Answer:

B CU2+ +2e- -> Cu

Explanation:

reduction means something opposite of the word

reduction means an electron is GAINED in the part before the arrow

it's the " + 2e- " part of the equation before the arrow or "->" part

oxidation is the LOSING of an electron so it would show up to the right of arrow or "->" of the equation as "+2e-"

both reduction & oxidation reactions are called "redox"

in a battery

anode is oxidation

cathode is reduction

anode is positive

cathode is negative electrode

decomposing compounds is electrolysis.

https://brainly.com/question/16118863

https://brainly.com/question/15313673

Answer:

Explanation:

Answer

It tells you what method she used and what she wanted to accomplish.  She is using

        an absolute dating method to study a sample of basalt

So the answer you should post is F. F and the quotation above say the same thing.

Answer:

B

Explanation:

Answer:

Taste bufs

Explanation:

May be teenager or adult is the most probable answer because teenager and adult are fully developed species of human so they can have most sensitive taste bud

PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT

Answer:

C

water has undergone a phase change and the composition of a substance was not changed

[tex]Molarity X \frac{0.762 mol}{05.576398 L} = Mass[/tex] is the of [tex]C_8H_1_8[/tex] is in 405,576.398 mL.

Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.

Given data:

Molar mass of  [tex]C_8H_1_8[/tex] = 0.762 mol

Volume of solution = 405,576.398 mL = 405,576.398 mL/1000 = 405.576398 L

Solution:

Step 1: Calculating  moles of [tex]C_8H_1_8[/tex]

• Molarity =[tex]\frac{\;Moles \;of \;solute}{\;Volume \;of \;solution \;in \;litre}[/tex]

• Putting the value in the given formula

• Moles of solute C8H18 = [tex]\frac{\;Mass}{\;Molar \;molar \;mass}[/tex]

• Moles of solute C8H18 = [tex]\frac{\;Mass}{0.762 mol}[/tex]

Now,

Molarity =[tex]\frac{\;Moles \;of \;solute}{\;Volume \;of \;solution \;in \;litre}[/tex]

Molarity =[tex]\frac{\frac{\;Mass}{0.762 mol}}{\;Volume \;of \;solution \;in \;litre}[/tex]

Molarity =[tex]\frac{\frac{\;Mass}{0.762 mol}}{405.576398 L}[/tex]

[tex]Molarity X \frac{0.762 mol}{05.576398 L} = Mass[/tex]

Hence, [tex]Molarity X \frac{0.762 mol}{05.576398 L} = Mass[/tex] is the of [tex]C_8H_1_8[/tex] is in 405,576.398 mL.

Learn more about molarity here:

https://brainly.com/question/2817451

#SPJ1

Balanced one

Moles of Pentyne

Moles of H_2O

1mol releases 241.8KJ

2mol releases 241.8(2)=483.6KJ

The isomer of the molecule in the depicted image would be A.

Isomers are molecules with the same chemical formula but different arrangements of their component atoms. Isomers also have different properties.

The original molecule in the image has a triple bond with 4 carbon atoms. Thus, its isomers must also have a triple bond with 4 carbon atoms.

The only option with a triple bond and 4 carbon atoms in the image is option A.

More on isomers can be found here: https://brainly.com/question/13422357

#SPJ1

Answer:

Here are the following answers to the five questions:

(1) "Form only at boundaries between two continental plates."

(2) "A fault-block mountain"

(3) "Island arcs form when hot, fluid rock rises through thin spots in Earth's crust, whereas hotspot volcanoes form when two oceanic plate boundaries push against each other until subduction happens and the plates partially melt."

(4) "The fault plane runs from the top of the rock to the bottom of the rock at an angle greater than 45 degrees."

(5) "Segments of Earth's crust bent and doubled over, and moving wind and water gradually shaped the rock into gently sloping domes."

Explanation:

Answer:

4Fe+3O2- 2Fe2O3

the ratio: 3:2

x:3.95

x=5.92 moles of O2

Bromine is a chemical element with the symbol Br and atomic number 35. It is the third-lightest halogen and is a volatile red-brown liquid at room temperature that evaporates readily to form a similarly coloured vapour.

Answer:

Bromine is a nonmetal in group 7 or group 17, known as the halogens. It has 7 valence electrons.

So the correct answer is "nonmetal, 7 valence electrons"