if 18.2 ml of 0.800 m hcl solution are needed to neutralize 5.00 ml of a household ammonia solution, what is the molar concentration of the ammonia?

The Ph of the buffer solutions change after the addition of 10 drops of 0.1m NaOH because when a strong base (OH-) is added to the buffer solution, the hydroxide ions are consumed by the weak acid that results forming water and the weaker conjugate base of the acid.

A buffer solution is an aqueous solution which consists of a mixture of weak acid and its conjugate base. Its PH changes in little amounts when we add small quantity of acid or base to it.

When we add a strong base (OH-) to the buffer solution, the hydroxide ions are consumed by the weak acid which results in forming water and the weaker conjugate base of the acid. As a result the amount of the weak acid decreases while the amount of the conjugate base increases.

To know more about buffer solution

https://brainly.com/question/24262133

#SPJ4

Answer:

The color would be red

Frequency = (speed) / (wavelength) = (3 x 108) / (670 x 10-9) = (3/670) x 1017 = 4.48 x 1014 Hz = 448,000 GHz.

Explanation:

The total kinetic energy of a gas's molecules is influenced by its temperature and molar mass. However, all gases have same kinetic energy average when the temperature is the same.

In some specialized light sources, xenon is employed. It is activated by an electrical discharge, which results in a stunning blue glow. Sunbed lamps, bactericidal lamps for use in food processing, and high electrical flash bulbs for photographers are all uses for xenon lamps.

One of the noble gases, xenon is odorless, tasteless, colorless, and chemically inert. Although not hazardous by itself, its components are potent oxidizers that are extremely toxic.

To know more about Xenon visit:

https://brainly.com/question/5516586

#SPJ4

The carbon concentration of an iron-carbon alloy for which the fraction of total ferrite is 0.94 is 0.423.

Alloy is a substance that is composed of two or more metals or of a metal and a non - metal which are united among themselves by fusion in their molten state.

Iron-carbon alloy is an alloy than contains iron(metal) and carbon(non-metal) as its constituents.

Carbon concentration of iron-carbon alloy is calculated as follows:

W = {C (Fe₃C) - C₀} / {C (Fe₃C) - C}

⇒ 0.94 = (6.7 - C₀) / (6.7 - 0.022)

⇒ 0.94 × 6.678 = 6.7 - C₀

⇒ 6.277 = 6.7 - C₀

⇒ C₀ = 6.7 - 6.277

⇒ C₀ = 0.423

Hence, the carbon concentration of an iron-carbon alloy for which the fraction of total ferrite is 0.94 is 0.423.

Learn more about carbon concentration from the link given below.

https://brainly.com/question/29441775

#SPJ4

Answer:

this one is 1

Explanation:

The bond order of Br2 is 1.

What is bond order?

Bond order defines the number of chemical bonds between a pair of atoms and is a measure of a bond's stability.

Since bromine only needs one more electron to complete an octet, it will work tirelessly to acquire it. A bromine atom joins with another bromine atom to do this through a covalent connection.

Hence bond order of Br2 is 1

To learn more about bond order from the given link

https://brainly.com/question/9713842

#SPJ4

Both the desirable alkene and the unwanted triphenylphosphine oxide dissolve in DCM in this experiment. Triphenylphosphine (IUPAC name: triphenylphosphane).

is a typical organophosphorus substance with the formula P(C6H5)3, often known as PPh3 or Ph3P. The synthesis of organic and organometallic compounds makes extensive use of it. Colorless crystals of PPh3 are relatively air stable is called Triphenylphosphine.

A hydrocarbon with a carbon-carbon double bond is known as an alkene in organic chemistry. Any hydrocarbon with one or more double bonds is referred to as an alkene, which is frequently used as a synonym for an olefin. A hydrocarbon with a carbon-carbon double bond is known as an alkene in organic chemistry.

Learn more about triphenylphosphine here

https://brainly.com/question/22717306

#SPJ4

Answer:

Using styrofoam cups is obviously a lot cheaper than using precise equipment, but it can still do the same job. However, remember that styrofoam cups are not exact and leave a lot of room for error.

The answer to the second part is: Calibration of Setup

Explanation: You can use these cups because their walls are insulated which prevents the transfer of heat between the system and its surroundings.

Because the Trichloroisocyanuric acid (TCICA) test is used to separate primary from secondary alcohols. Both major alcohols, methanol, and ethanol will undergo TCICA's oxidation process. Consequently, acetonitrile is employed as the solvent for the TCICA test rather than one of these.

What is TCICA test?

Simple primary and secondary alcohols can easily be separated from one another based on how quickly they oxidize when exposed to trichloroisocyanuric acid (TCICA). The TCICA test is carried out by adding the unknown to a solution of TCICA in acetonitrile3 containing hydrochloric acid4 and timing how long it takes for a precipitate5 to develop. Secondary alcohols respond quickly while primary alcohols react more slowly.

To learn more about Methanol and ethanol click on the given link:

https://brainly.com/question/14687410
#SPJ4

The shell's outside surface area is 452.57 cm2 and its inside metal volume is 636.95 cm3.

Atomic components like electrons, neutrons, & protons make up metals. The quantity of protons in an atom can be used to identify it from an atom of another element. About 25% of the earth's crust is made up of metals.

Diamond is merely an allotrope of carbon; it is in no manner a metal. It doesn't display any of the physical or chemical characteristics of metals, such as their electrical properties, malleability, ductility, or how they react to acids or salts, among other things.

To know more about Metal visit:

https://brainly.com/question/29400906

#SPJ4

The vapor escapes from the storage vessel it will mix with air and become flammable.

Inert is different from flushing. flushing ensures that no ignitable mixture is formed. Inerting makes flammable mixtures safe by introducing an inert gas. Exhaust gas generated from a ship's boiler into a scrubber by a fan cleaned and cooled to generate inert gas, which is sent to the ship's cargo tank as an inert gas.

Inert gas is an asphyxiating agent. Asphyxiating gases replace the oxygen in the air and reduce the oxygen you breathe. Without oxygen, you will die. Before entering a room with large amounts of inert gas, make sure there is enough oxygen in the room or have a self-contained breathing apparatus. They are said to adopt the noble gas configuration or the perfect electronic configuration.

Learn more about Flammable here:- https://brainly.com/question/14214497

#SPJ4

Answer: CONDENSED ELECTRON CONFIGURATION FOR MN2+ =

1.[Ar} 4[tex]s^{2[/tex] 3[tex]d^{3}[/tex]

2.This is paramaganetic

Explanation:

1. On the periodic table, you first find Mn which is in the "d block section"

The condensed electron configuration of Mn is [Ar} 4[tex]s^{2[/tex] 3[tex]d^{5}[/tex] however since the charge is 2+ this means that the atom is losing two-electron. So configuration as stated before is [Ar} 4[tex]s^{2[/tex] 3[tex]d^{3}[/tex]

2. This Configuration is paramagnetic since the "d" orbitals are not all filled with electrons.

Hope this helps someone out!

In the combustion of butane 4 moles of carbon dioxide and 5 moles of water are produced. Therefore, the number of carbon atom does not change at all.

Combustion reaction is the reaction of a gas with atmospheric oxygen to produce carbon dioxide and water. The combustion reaction of butane gas is written as follows:

[tex]\rm C_{4} H_{8} + \frac{13}{2} O_{2} \rightarrow 4 CO_{2} + 5H_{2}O[/tex].

As per this balanced equation, 4 moles of carbon dioxide are produced from one mole of butane. According to mass conservation law, total mass in a reaction will be conserved and no atoms lost or gained.

Hence, each element will be equal in number on both side. There are 4 carbon atoms in both side of the reaction. Thus number of carbon atoms does not change.

To find more on combustion, refer here:

https://brainly.com/question/15117038

#SPJ1

According to the law of conservation of mass, the number of carbon atoms does not change and hence it best describes carbon atoms in the reaction.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.

Learn more about law of conservation of mass,here:

https://brainly.com/question/28711001

#SPJ1

Yes, the unlabeled clear liquid water has a density of 1 gram/liter.

Density refers to the mass of an object in unit volume of a substance. The formula for density can be represented as density = Mass / Volume. Density is expressed in grams / cubic centimeter. A common unit of measurement for water's density is gram per milliliter i.e. 1 g/ml or 1 gram per cubic centimeter i.e. 1 g/cm3.

So the exact density of water is not 1 g/ml, but rather less at 0.99 g/ml at 4° Celsius which is about 39.2° Fahrenheit. Water is an inorganic, transparent, odorless, and colorless chemical substance that is the main constituent of the hydrosphere of the earth and the fluids of all living organisms. It is important for all forms of life despite providing no food, energy, or organic micro-nutrients.

So we can conclude that the unlabeled clear liquid water has 1 gram/liter of density.

Learn more about density here: https://brainly.com/question/1354972

#SPJ1

From the balanced reaction equation shown, the mole ratio of the sulfuric aid and the boron hydroxide is 3:2.

We know that in a chemical reaction, there are two sides; the reactants side and the products side. In the reactants side, what we have are the species that were combined to be able to get the products that we would have on the right hand side.

We have to recall that the way the reaction takes place and the formula of the products that are formed depends on the formula of the reactants as well as the mole ratio of the reactants. The mole ratio has to do with the stoichiometric coefficients of the reactants and the products in the reaction.

We now have to study the reaction closely so that we can be able to obtain the mole ratio of the sulfuric acid and the boron hydroxide.

Learn more about mole ratio:https://brainly.com/question/15288923

#SPJ1

Observing particles moving against the concentration gradient in a lab investigation. this type of transport are they observing is active transport.

The active transport can be as the movement of the particles from lower concentration to the higher concentration are on the opposite in the direction of the concentration gradient. in the given condition the particles are moving in the against the concentration gradient in an investigation so, this is an active transport. The active transport are of two types : the primary active transport and the secondary active transport.

Thus, Observing particles moving against the concentration gradient in a lab investigation. this type of transport are they observing is active transport.

To learn more about active transport here

https://brainly.com/question/14955482

#SPJ4

Chemically speaking, minerals are organic is false.

Minerals are defined as a naturally crystallized element or chemical compound that was created through geological processes. The growth of strong bones and teeth is one of minerals' three main purposes. controlling a cell's internal and external body fluids. transforming the food you eat into energy. They support the creation of new technology and are an integral component of daily living.

Inorganic materials include minerals. A mineral is an inorganic solid that forms naturally and has an ordered arrangement of atoms and ions as well as a distinct chemical composition. Your belt buckle, jewelry, and clothing zippers are all formed of metal, which is a mineral. An inorganic material is a mineral. It wasn't created by living things.

Thus, chemically speaking, minerals are organic is false.

To learn more about minerals, refer to the link below:

https://brainly.com/question/18078524

#SPJ12

Answer:

≈ 112.65 kmh

Explanation:

Formula

for an approximate result, divide the speed value by 37.282

hope this helped :)

Explanation:

1 mile = 1.609344... km

1 hour = 60 minutes

70 mph = 70 × 1.609344 / 60 =

= 1.877568... km/minute

In locations one mile above sea level such as Denver, Colorado, the atmospheric pressure is less than 1 atm because the air is less dense. This means that it takes 95 °C thermal energy to get a liquid to boil in these locations

There are small molecule of air in the atmosphere and these molecules combine and form different layer in the atmosphere which create some kind of pressure and the pressure create by the air molecule layer is known to be the atmospheric pressure which is exerted by everything in the atmosphere and less pressure will decreases the temprature for water boiling point

Know more about liquid

https://brainly.com/question/20315127

#SPJ1

Answer:

boiling it

Explanation:

the most simple way to purify water both at home and in the wild, is by boiling in kettle or if you are in the wilderness simply by boiling it over a fire.

One of the ways to purify water is by filtration.

What is filtration process?

Filtration is a physical separation procedure that uses a filter material with a complicated structure through which only fluid can flow to separate solid matter and fluid from a mixture. Oversize solid particles are those that cannot pass through the filter medium, and the fluid that does is known as the filtrate. Oversize particles can form a filter cake on top of the filter and also block the filter lattice, preventing the fluid phase from passing through the filter, a process known as blinding. The effective pore size of a filter is the size of the biggest particles that can successfully pass through it.

Water can be purified by the process of filtration.

To know more about filtration, click on the link

https://brainly.com/question/23945157

#SPJ4

The mass of KHP titrated by the sodium hydroxide solution is  0.4178 g.

What is the balanced equation for this case?

[tex]HC_{8} H_{4} 0_{4} K + NaOH[/tex]  ==> [tex]C_{8} H_{4} O_{4}KNa + H_{2}O[/tex]

moles of NaOH used = 0.02046 L x 0.1000 moles/L = 0.002046 moles

NaOH = 0.002046 moles KHP (1:1 mole ratio from balanced equation).

Mass KHP = 0.002046 moles KHP x 204.22 g/mole =

= 0.41783 grams = 0.4178 g (to 4 significant figures

What are titrations?

Titration is the process of gradually adding one solution with a known concentration (referred to as a titrant) to the known volume of another solution with an unknown concentration. The titrant is added until the second solution's unknown concentration is neutralised by the titrant, which is frequently visible by a change in colour when employing an indicator.

To learn more about Titrations, click on the link below

https://brainly.com/question/186765

#SPJ1

zinc is more reactive than hydrogen it displaces hydrogen in dilute hydrochloric acid.

Life cannot exist without the chemical element zinc (Zn), which belongs to Group 12 (IIb, or the zinc group) of the periodic table and is one of the most widely utilized metals. Zinc has a significant commercial significance.

Average zinc content per ton in the Earth's crust is 65 grams (2.3 ounces), which is somewhat greater than copper. The primary zinc mineral, sphalerite, as well as its oxidation products, smithsonite and hemimorphite, make up almost all of the world's zinc ore. Native zinc deposits have reportedly been discovered in Australia, New Zealand, and the US. The main producers of zinc at the start of the twenty-first century are China, Australia, and Peru.

To know more about  zinc visit: https://brainly.com/question/24711517

#SPJ9

The molecular formula of this compound is C4H4O4 .

What is molar mass ?

In chemistry, the molar mass of a compound is defined as the mass of a sample of that compound divided by the amount of substance. This is the number of moles in that sample measured in moles. Molar mass is a mass property, a molecular property of matter. Molar mass is the average of many instances of a compound that often differ in mass due to the presence of isotopes . Most commonly, molar mass is calculated from standard atomic masses, so it is a global average and a function of the relative isotopic abundances of constituent atoms on Earth. Molar mass is good for converting between the mass of a substance and the quantity of a bulk substance.

1 mol contains 5.8/0.05 g = 116 g

of which 48 g is carbon

64g is oxygen remaining 4g hydrogen

4-C, 4-O, 4-H

C4H4O4

To know more about molar mass , click the given link ;

https://brainly.com/question/837939

#SPJ4

The intermolecular force that is common to both is the dipole forces

b) The lesser molecular mass of [tex]SeOF_{2}[/tex] made it to have a lesser boiling point.

We know that apart from the forces that holds the atoms together in a molecule, there is yet another force that holds the molecules together in a particular state of matter. Let us recall that matter is anything that has mass and occupy space.

If we look at the two compounds that we have, it is clear that the commonality between the two compounds is that the both of them are held together by the dipole forces because the molecules are composed of atoms that are polar.

On the other hand, there is a dispersion force that is found in every molecule. The magnitude of the dispersion forces depends on the molecular mas of the molecule. Given that [tex]SeOCl_{2}[/tex] has a greater molecular mass than [tex]SeOF_{2}[/tex], it would necessarily have  grater boiling point than the later.

Learn more about intermolecular forces:https://brainly.com/question/9007693

#SPJ1

DNA is composed of units called nucleotide , each of which contains a phosphate group, a 5-carbon sugar, and one of 4 nitrogen-containing bases.

This is referred to as deoxyribonucleic acid and it is the genetic material of most organisms and ensures that traits are passed from the parent to offspring during the process of reproduction.

It is made up of units called nucleotide which contains different compounds such as the following below and is used for various purposes such as for identification.

Read more about DNA here https://brainly.com/question/16099437

#SPJ1

8. Luster would be the least helpful property in determining whether a substance is a metal or non-metal.

What is Luster?

9. Phosphorus is the identified non-metal here.

What is a non-metal?

10. An element near Argon in the periodic table would probably be a poor heat conductor.

What is a periodic table?

11. The unit cm3 is used to express Volume.

What do you mean by the unit cm3?

12. The conversion factor 1L/103L would be used to change Liters to Milliliters.

What are Liters and Milliliters?

To learn more about Elements, Periodic Table, Metals and Non-metals, check this link:

https://brainly.com/question/25916838

#SPJ1

Answer:

sp3

Explanation:

4 bonds to central atom with no lone pair

Answer: make it paragraph form lol

Explanation: i really want 30 points

The molarity of the HCl, if the solution has a density of 1. 20 g/ml will be  12.83 M

% of HCL in the solution = 39.0 %

Density of the solution = 1.20 g/ml

Molarity of HCL = ?

Volume of the solution is not given so we take it as 1.0 L

Calculate the mass of silution

   mass = density × volume

    mass of solution = 1.20 g/ml × 1000 ml/L × 1.0 L

    mass of solution = 1200 g

Calculate the mass of HCl

38 %  = 38 g / 100 g

    mass of HCl = 1200 g (39 g / 100 g)

    mass of HCl = 1200g × 0.39 g

    mass of HCl = 468 g

Now calculate the number of moles of HCl

    number of moles = mass / molar mass

    number of moles of HCl = 468 g / 36.46 g

    number of moles of HCl = 12.83 mol

Calculate molarity

    molarity = number of moles of solute / volume L

    molraty HCl = 12.83 mol / 1 L

    molarity of HCl = 12.83 mol/L or 12.83 M

You can also learn about molarity and density from the following question:

https://brainly.com/question/10710093

#SPJ4

In obtaining the rate of reaction for the reaction of sodium metal and water;

a) -0.005 g/s

b) 0.000217 mol/s

c) 0.00025 g/s

d) 0.0001084  mol/s

The term rate of reaction has to do with the rate at which the reactants are changed to become products or the rate at which the products are seen to appear.

a)  The average rate of decrease of the sodium in g/s is;

Mass of sodium/ time taken

= -(0.075 g / 15  s) = -0.005 g/s

b) The average rate of decrease of the sodium in mol/s;

Number of moles of sodium = 0.075 g/23 g/mol = 0.00326 moles

Given that;

Number of moles/ time taken

= 0.00326 moles/15 s

= 0.000217 mol/s

Given that the reaction equation is;

[tex]2Na(s) + 2H_{2} O(l) ---- > 2NaOH(aq) + H_{2}(g)[/tex]

c) The average rate of production of hydrogen in g/s = 1/2 * 0.005 g/s

= 0.00025 g/s

d) The average rate of production of hydrogen in mol/s;

1/2 * 0.000217 mol/s

= 0.0001084  mol/s

Learn more about rate of reaction:https://brainly.com/question/13440548

#SPJ1