Identify the steps that are followed in taking a stratified random sample. i. Take a sample of size n/k from each strata, where n is sample size and k is the number of strata. ii. Determine what portion of the sample should come from each strata. iii. Measure the size of the strata as a proportion of the population. iv. Take a systematic sample from the population as a whole. Take random samples from each strata.

The balanced form of the chemical equation shown is N₂(g) + 3H₂(g) → 2NH3(g) (option A).

A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation is the same.

According to this question, the chemical equation between nitrogen and hydrogen is given as follows: N₂(g) + H₂(g) → NH3(g)

The balanced form of the chemical equation shown is N₂(g) + 3H₂(g) → 2NH3(g).

Learn more about balanced equation at: https://brainly.com/question/7181548

#SPJ1

The potential energy decreases as kinetic energy increases. Hence, option C is correct.

Potential energy is stored energy that depends upon the relative position of various parts of a system.

To shoot an arrow, the string has to be released. The kinetic energy is converted by the potential energy of the bow. Therefore, potential energy is converted into kinetic energy.

Hence, option C is correct.

Learn more about the potential energy here:

https://brainly.com/question/24284560

#SPJ1

Moles of NaOH required to make a buffer with a pH of 12.4 will be 1.18.

Calculation of moles:

1L of 1M solution of [tex]H_3PO_4[/tex]

Buffer pH= 12.4

As we know

pH + pOH= 14

pOH= 14 - pH

pOH= 14 - 12.4

pOH= 1.6

Also,

[tex]pOH= -log[OH^-]\\[/tex]

By calculating concentration of Hydroxide ion, we can calculate the moles of NaOH required.

[tex]1.6= -log[OH^-]\\[/tex]

Taking antilog, we get

[tex][OH^-]= 1.18M[/tex]

As the volume of the solution is 1L.

Molarity is number of moles of solute in 1L of the solution.

Therefore, moles of [tex][OH^-]= 1.18[/tex]

So, number of moles of NaOH required will be 1.18.

Learn more about Buffer solution here,

https://brainly.com/question/15991816

#SPJ4

Nonmetals have the ability to attract electrons better than metals because they have a higher electron affinity or electronegativity than metals.

Electronegativity is the tendency, or a measure of the ability, of an atom or molecule to attract electrons and thus form bonds.

An element in the periodic table with a high electronegativity will automatically have a high electron affinity.

Metals (low electronegativity) are known to lose electrons to non-metals (high electronegativity), hence, nonmetals have the ability to attract electrons better than metals because they have a higher electron affinity or electronegativity than metals.

Learn more about electronegativity at: https://brainly.com/question/2060520

#SPJ1

Answer:

Covalent bonds form from shared electrons. Nature favors chemical bonding because most atoms have lower potential energy when they are bonded to other atoms than they have when they are independent particles.

Answer:

1.3 L

Explanation:

The volume of a rectangular cube can be calculated using the following formula:

Volume (L) = length (cm) x width (cm) x height (cm)

Keep in mind that 1 L = 1,000 cm³.

Before you can plug the values into the equation, you need to make sure they all have the same unit. Since the length is in meters (m), you need to first convert it to centimeters.

1 meter = 100 cm

 0.159 m           100 cm
---------------  x  ----------------  =  15.9 cm
                           1 m

Now, you can solve for the volume. To find the answer is the unit liters, you need to divide the volume by 1,000.

Volume = l x w x h

Volume = 15.9 cm x 10.5 cm x 7.7 cm

Volume = 1,285.5 cm³

Volume = 1.2855 L ------>  Volume = 1.3 L

Answer:

56 grams

Explanation:

44.8 L = 2 mol

Diatomic nitrogen has a formula mass of 28 g/mol, so 2 moles is 56 grams.

a) 56g

At STP,

22.4 L of N₂ = 1 mol

We have given 44.8 L of N₂, therefore,

44.8 L of N₂ = [tex]\frac{44.8}{22.4}[/tex]

                    = [tex]2[/tex] mol

We know that,

1 mol of N₂ = 28 g

Hence,

2 mol of N₂ = 28 × 2

                   = 56g

Hence, there are 56 g of N₂ in 44.8 L of nitrogen gas.

Learn more about calculation at STP here:

https://brainly.com/question/9509278

#SPJ4

The freezing point depression when sugar is dissolved in water to make a 0.50 molal solution is 0.93 °C.

The freezing point depression of a solvent is calculated using the formula below:

Where:

The Van’t Hoff factor for sugar = 1

m = 0.50

Substituting the values:

ΔTf = −1 ×1.86 × 0.50m = − 0.93°C

In conclusion, the freezing point of water is depressed by 0.93 °C.

Learn more about freezing point depression at: https://brainly.com/question/14115775

#SPJ1

The negative effect of technology on Healthcare:

Impersonal treatment, harmful health impacts, higher expenditures, the potential for overuse, and privacy violations are just a few of the negative effects of medical technology.                

Medical technology:

It refers to all technological tools or apparatus utilized to protect human life. Medical equipment such as an insulin pump, a wireless brain sensor, a blood glucose meter, a digital thermometer, pulse oximeters, smart inhalers, etc the tools which had helped patients receive better medical treatment.

Effects of Medical technology:

Medical technology, nevertheless, can potentially cause issues for the patient like:

1. Impersonal treatment: When a healthcare professional uses technology too frequently, they could spend less time getting to know the patient as a person and more time dealing with the equipment.

2. Harmful health impacts: Surgery, radiation therapy, and chemotherapy are a few examples of treatments that might be advantageous but also have risks.

3. Higher expenditures: Due to the research and marketing required to bring new technologies to market and to generate a profit for their creators and manufacturers, they may result in increased patient costs.

4. Potential for overuse: The use of a technology or new product by a medical professional may be encouraged by the manufacturer, regardless of whether it is in the patient's best interest.

5. Privacy violation: Electronic medical records (EMR), for example, collect and manage patient information. This new technology is convenient, but it also has the potential to be misused, compromising patient privacy and personal data.

Learn more about healthcare information technology here:

https://brainly.com/question/14379549

#SPJ4

Answer:

u can just multiply 1

Explanation:

krkrfmfmmfdkd

The  absorption spectrum of an atom shows pattern of dark lines or bands attained by transmitting absorbed light beam into the spectroscope.

By sending an absorbed light beam into a spectroscope, one can create a pattern of black lines or bands.

The vapors or solution of a substance in the discharge tube are illuminated by a white light. After passing through a spectroscope, the transmitted light produces a spectrum of black lines at specific wavelengths. These shady lines match the light radiation wavelengths that the material has absorbed.

An atom, ion, or molecule absorbs photons with energies equal to the energy difference between the two states when it transitions from one to the other. An absorbance spectrum that depicts the intensity of emission as a function of wavelength is the end result.

Learn more about atom at:

https://brainly.com/question/6258301

#SPJ1

Learn more about Ascribed status at:

brainly.com/question/1266835

#SPJ1

Answer:

C.) Chromosomes

Explanation:

Nucleotides are made up of three parts: a deoxyribose sugar, a phosphate, and a nitrogen base.

Chromosomes are long, condensed strands of DNA.

Answer: See below

Explanation:

1.

[tex]\text{2.57 grams C} \, \, \cdot \frac{1 \text{mol C}}{12.011 \text{g}} \cdot \frac{6.022 \cdot 10^{23} \text{atoms}}{1 \text{mol}} = 1.29 \cdot 10^{23} \text{ atoms of C}[/tex]

2.

[tex]108 \text{ grams Cl}_2} \,\, \cdot \frac{2 \text{ Cl atoms}}{1 \text{Cl}_2 \text{ molecule}} \cdot \frac{1 \text{ mol Cl}}{35.453 \text{g}} \cdot \frac{6.022 \cdot 10^{23} \text{atoms}}{1 \text{ mol Cl}} = 3.67 \cdot 10^{24} \text{ atoms of Cl}[/tex]

3.

[tex]1.00 \,\cdot 10^{20} \text{ atoms Na } \cdot \frac{1 \text{mol Na}}{6.022 \cdot 10^{23} \text{ atoms}} \cdot \frac{22.990 \text{g}}{1 \text{mol Na}} = 0.00382 \text{ grams Na}[/tex]

Advantages of mineral-based lubricants:

Chemical stability is the advantage of mineral-based lubricants over vegetable oil-based lubricants when used in aircraft engines.

Lubricants used in aircraft engines:

Mineral oils are used in modern aircraft engines because they can maintain a specified viscosity over a wide range of temperatures. For instance, the capacity to function in temperatures between -10°C and 40°C is crucial for the start-up of an aircraft engine. Greater grade oils can be utilized at higher ambient and startup temperatures, but they are useless in arctic or freezing circumstances, where a synthetic multigrade would be more appropriate.

Because mineral oils are more fluid even at low temperatures, they can reach every part of an aircraft's engine far faster than vegetable oils can. As a result, the engine will start up with less wear.

Additionally, compared to vegetable oils, mineral oils can result in significant fuel savings of between 1.5 percent and 3 percent. The usage of mineral oils makes sense for operators attempting to stay competitive in the airline industry since it results in lower fuel costs as well as reduced expenses for maintenance and engine downtime due to excessive wear and extended active service life.

Learn more about lubricants here;

https://brainly.com/question/1472706

#SPJ4

The ions are as follows;

A cation is a positive ion while an anion is a negative ion. Ionic compounds are composed o cations and anions.

The anions and cations in the ionic compounds in the table are shown below;

Learn more about cations and anions:https://brainly.com/question/4933048

#SPJ1

Answer:

Matter is all around you. All atoms and compounds are made up of very small pieces of matter. Such atoms continue to build the everyday things you see and touch. Matter is defined as anything that has mass (it has volume) and takes up space.

Explanation:

The three states of matter are the three distinct physical forms which matter can take in most environments: solid, liquid , and gas. Other states, such as plasma, Bose-Einstein condensate, and neutron stars, may be present in extreme environments.

P 15 atm

V₁ = 12x103 m3 -3 3 V₁ = 12x10 m" T₁ = 25°c T= 28815 K

P₁ = 1.52x10 Pa

Now, Finel quantities, T₂ = 35°C = 308.15 °K

V2= 851 = -3 3

Now

by ideal gas equation

P2Y2 T2

= PV, T2

1152 X106 x 12x16 3 x 308115 8,5×103 x 288,15 = Pa

=

21294×10 Pa

P₂ = 21264 Atm

final

pressure will be

21264 Adm.

Please check the attached file for a brief answer.

Learn more about the temperature at

https://brainly.com/question/24746268

#SPJ4

Answer:

21.2 g

Explanation:

From the coefficients of the equation, we know that for every mole of nitrogen produced, 3 moles of CuO are consumed.

CuO has a formula mass of 79.545 g/mol, so 181 g is equal to 181/79.545 = 2.275 mol.

This means we need 2.275/3 = 0.758 mol of nitrogen.

Nitrogen has an atomic mass of 28.014 g/mol, so the answer is (28.014)(0.758) = 21.2 g to 3 sf

A student measures the molar solubility of silver carbonate in a water solution to be 1.24 × 10⁻⁴ M. Based on her data, the solubility product constant for this compound is 7.63 × 10⁻¹² M³.

Stoichiometry helps us use the balanced chemical equation to measure quantitative relationships and it is to calculate the amounts of products and reactants that are given in a reaction.

Silver carbonate dissociates as follows

Ag₂CO₃ (s) ⇄ 2Ag⁺ (aq) + CO₃⁻² (aq)

To find the solubility product constant use the expression

[tex]K_{sp} = [A^{+}]^{a} [B^{-}]^{b}[/tex]

where

[tex]K_{sp}[/tex] = Solubility product constant

A⁺ = cation in an aqueous solution

B⁻ = anion in an aqueous solution

a, b = concentration of a and b

Molar Solubility (S) = 1.24 × 10⁻⁴ M

Solubility, Ag⁺ = 2S

Solubility, CO₃⁻² = S

Put the value in above expression, we get

[tex]K_{sp} = [A^{+}]^{a} [B^{-}]^{b}[/tex]

       = [Ag⁺]² [CO₃⁻²]¹

       = [2S]² [S]¹

       = 4S² × S

       = 4S³

       = 4 × ( 1.24 × 10⁻⁴ M)³

       = 7.63 × 10⁻¹² M³

Thus from the above conclusion we can say that A student measures the molar solubility of silver carbonate in a water solution to be 1.24 × 10⁻⁴ M. Based on her data, the solubility product constant for this compound is 7.63 × 10⁻¹² M³.

Learn more about the Solubility Product Constant here: https://brainly.com/question/1419865

#SPJ4

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: A student measures the molar solubility of silver carbonate in a water solution to be 1.24 × 10⁻⁴ M. Based on her data, the solubility product constant for this compound is ..........

Anions are solvated in protic hydrogen-bonding solvents (such as ethanol). Consequently, nucleophiles are less reactive. Since soft nucleophiles are less strongly solvated than hard nucleophiles, these solvents boost the relative reactivity of soft anions.

The ethanol is a base  Because carbocation is an extremely reactive species, a base or nucleophile as weak as ethanol can replace or remove it. SN1 and E1 would not be conceivable without the carbocation or a strong departing group.

In polar aprotic solvents, nucleophilic substitution reactions of anionic nucleophiles often proceed more quickly. The normal relative reactivity order in such solvents (like DMSO)is Anions are solvated in protic hydrogen-bonding solvents (such as ethanol). Consequently, nucleophiles are less reactive.

Learn more about nucleophiles here:-

https://brainly.com/question/27127109

#SPJ4

Answer:

C.) H₂O and CO₂

Explanation:

A product is what is created during reaction (the things on the right side of the chemical equation). A combustion reaction always forms water, carbon dioxide, and heat. In this case, the equation looks like this:

2 C₂H₆ +7 O₂ ----> 6 H₂O + 4 CO₂

Answer:

same question can I copy the answer

Explanation:

haha sorry

Answer:

S

Explanation:

Reactivity goes UP as you go to the right or upward on the periodic table

  S is above and to the right of As     so we would expect it to be the more reactive  of the two.

The new pressure is 81.675 torr

Since temperature and moles are held constant, we use Boyle's Law:

A gas law known as Boyle's law asserts that a gas's pressure is inversely proportional to its volume when it is held at a fixed temperature and of a given mass.

To put it another way, as long as the temperature and volume of the gas remain constant, the pressure and volume of the gas are inversely proportional to one another.

The Anglo-Irish chemist Robert Boyle proposed Boyle's law in the year 1662.

P1V1=P2V2. Simply plug in your values. The units can remain in torr. Converting to atmospheres is not needed.

(242 torr)(27.0 L)=P2(80.0 L)

P2=[(242)(27)]/80 = 81.675 torr

Hence The new pressure is 81.675 torr

Learn more about Boyle's Law here

https://brainly.com/question/26040104

#SPJ4

Answer:

Ca and O₂

Explanation:

In the chemical reaction producing calcium oxide (CaO), the reactants are Ca and O₂. The reactants are the substances that are reacted to make the new substance(s). The products are the new substances created from the reaction. The reactants are generally to the left of the arrow and products are to the right of the arrow.

Answer:

The gas fumes are toxic

Explanation:

The extremely high concentrations of carbon monoxide produced by an engine can raise CO concentrations in a closed building so quickly that a person may collapse before they even realize there is a problem. Carbon monoxide reduces the amount of oxygen to the brain, causing CO intoxication, and lack of reasoning.

Molar mass of ethanol

Mass:-

Answer:

Molar mass of ethanol (C2H5OH) 

=2(12)+6(1)+16.1

=46.1 g/mol

How many grams I.e.,

mass = no. of moles × molar mass

= 2.6×46.1

The Average atomic weight of X is 28.7amu

Isotopes are atoms with the same number of protons but differing numbers of neutrons.

Different isotopes have various atomic masses.

The proportion of atoms with a particular atomic mass that can be found in a naturally occurring sample of an element is known as the relative abundance of an isotope.

An element's average atomic mass is computed as a weighted average by multiplying the relative abundances of its isotopes by their respective atomic masses, then adding the resulting products.

Using mass spectrometry, it is possible to determine the relative abundance of each isotope.

The atomic weight of the element will be a weighted average of the isotopes based on the relative abundance:

(27.730 x 0.6058) + (28.841 x 0.1835) + (31.321 x 0.2107) = 16.7988 + 5.2923+ 6.599 = 28.690 = 28.7 amu.

Average atomic weight of X is 28.7amu

Learn more about Average Atomic Weight here

https://brainly.com/question/6200158

#SPJ4

Answer:

1.44 L

Explanation:

If the temp does not change

P1V1 = P2V2

1 * 3.6   = 2.5 * V2

V2 = 1.44 L