I need help I don’t really get what I have to do to get the answer

The statement "Hydrogen can be prepared by suitable electrolysis of aqueous cupric (Cu(II)) salts" is false.

Hydrogen gas ([tex]H_{2}[/tex]) is typically generated through the electrolysis of water, not aqueous cupric (Cu(II)) salts. In the process of water electrolysis, the water molecule ([tex]H_{2}[/tex]O) is split into hydrogen gas  ([tex]H_{2}[/tex]) and oxygen gas ([tex]O_{2}[/tex]) by passing an electric current through the water.

The electrolysis of aqueous cupric salts would involve the deposition of copper metal (Cu) at the cathode and the liberation of oxygen gas at the anode, as copper ions (Cu(II)) are reduced to copper metal. This process does not produce hydrogen gas.

Therefore, The statement "Hydrogen can be prepared by suitable electrolysis of aqueous cupric (Cu(II)) salts" is false.

To know more about electrolysis here

https://brainly.com/question/31415983

#SPJ4

1. AldohexoseAldohexose refers to a hexose that contains an aldehyde functional group. An example of this is glucose, which has the formula C6H12O6 and the structural formula H-(C=O)-(CHOH)5-H.

2. Reducing sugarA reducing sugar is a type of sugar that is able to act as a reducing agent due to the presence of a free aldehyde or ketone functional group. When these groups are present, they can undergo oxidation-reduction reactions. Examples of reducing sugars include glucose, fructose, maltose, and lactose.

3. HemiacetalA hemiacetal is a compound that has an -OH group and an -OR group (which can be any alcohol) attached to the same carbon atom. In other words, it is a compound that has both an alcohol and an ether functional group. Hemiacetals can be formed by the reaction of an aldehyde or ketone with an alcohol. For example, glucose can undergo a reaction with an alcohol to form a hemiacetal.

Learn more about functional group here:

https://brainly.com/question/1356508

#SPJ11

The Gibbs free energy change (ΔG°) for a redox reaction where 6 moles of electrons are transferred and E° = -2.60 V is -129,700 J.

The standard Gibbs free energy change (∆G°) for a redox reaction can be calculated using the equation: ∆G° = -nF∆E°, where n represents the number of moles of electrons transferred, F is the Faraday constant (96,500 J/(V∙mol)), and ∆E° is the standard cell potential. In this case, 6 moles of electrons are transferred, and the standard cell potential (∆E°) is given as -2.60 V.

The standard Gibbs free energy change (∆G°) for the redox reaction with 6 moles of electrons transferred and a standard cell potential (∆E°) of -2.60 V can be calculated using the equation ∆G° = -nF∆E°. The Faraday constant (F) is 96,500 J/(V∙mol). We will now compute the value of ∆G° using these values.

Substituting the given values into the equation, we have ∆G° = -(6 mol)(96,500 J/(V∙mol))(-2.60 V). Multiplying these values, we get ∆G° = -1,880,400 J. The negative sign indicates that the reaction is spontaneous in the forward direction under standard conditions. The magnitude of ∆G° represents the maximum work obtainable from the reaction. In this case, the value of ∆G° is 1,880,400 J, which indicates that a significant amount of energy is released during the redox reaction

To learn more about redox reaction here brainly.com/question/28300253

#SPJ11

The required partial pressure of neon in mmHg) in the tank is 272 mmHg.

The partial pressure of neon in the tank is 152 mmHg.A mixture of neon, argon, and helium gases are contained in a tank. The total pressure in the tank is 600. mmHg, while the partial pressures of neon and argon are 120 torr and 0.20 atm, respectively.To calculate the partial pressure of neon in mmHg, we need to convert the pressure of argon to mmHg:0.20 atm x 760 mmHg/atm = 152 mmHgNext, add the partial pressures of neon and argon:120 torr + 152 mmHg = 272 mmHg

Therefore, the answer is 272 mmHg, option (b) is correct.

Learn more about pressure here

https://brainly.com/question/15241334

#SPJ11

Arranging the species by their relative molar amounts in a 1.0×10^−6M solution of Ba(OH)2(aq) at 25 °C:

Greatest amount: OH^-

Ba(OH)2

Ba^2+

H2O

H3O^-

In the given solution of Ba(OH)2(aq), the compound dissociates into its constituent ions, Ba^2+ and OH^-. The concentration of OH^- will be twice the concentration of Ba(OH)2 since each Ba(OH)2 molecule produces two OH^- ions. Therefore, OH^- will be present in the greatest amount.

Ba(OH)2 will be the next species in terms of molar amounts, followed by Ba^2+ since they are both present at half the concentration of OH^-. Water (H2O) does not participate in the chemical reaction and remains unchanged in terms of molar amounts. H3O^+ is not mentioned in the given compound Ba(OH)2 and is not present in this solution.

Therefore, based on the relative molar amounts, the arrangement of the species is as follows: OH^- (greatest amount), Ba(OH)2, Ba^2+, H2O, H3O^+ (least amount).

Learn more about molar: https://brainly.com/question/837939

#SPJ11

Based on the experimental outcome, the possible pH range of the unknown substance cannot be determined without specific information about the experimental conditions and results.

The pH range of a substance depends on its acidic or alkaline properties. Without knowing the experimental conditions or the specific results, it is not possible to determine the pH range of the unknown substance. pH is a measure of the concentration of hydrogen ions in a solution, and it can range from 0 (very acidic) to 14 (very alkaline), with 7 being neutral. Factors such as the presence of acids, bases, or buffers, as well as the concentration and strength of these substances, can greatly affect the pH range. Therefore, without more information, it is not possible to provide a specific pH range for the unknown substance based solely on the experimental outcome.

Learn more about PH range here ; brainly.com/question/30001446

#SPJ11

The concentration of Mn²⁺ in the voltaic cell is approximately 2314 M².

To calculate the concentration of Mn²⁺ in the voltaic cell, we can use the Nernst equation, which relates the cell potential (Ecell) to the standard cell potential (E°cell) and the concentrations of the species involved.

The Nernst equation is given by:

Ecell = E°cell - (0.0592 V / n) log(Q)

Where:

- Ecell is the cell potential

- E°cell is the standard cell potential

- n is the number of electrons transferred in the balanced redox reaction

- Q is the reaction quotient, which is calculated using the concentrations of the species involved

In this case, the balanced redox reaction for the Mn/Mn²⁺ and Cd/Cd²⁺ half-cells can be written as:

Mn²⁺ + 2e⁻ → Mn

Cd²⁺ + 2e⁻ → Cd

From this equation, we can see that the number of electrons transferred (n) is 2.

Using the standard reduction potentials provided, we have:

E°cell = E°(Mn/Mn²⁺) - E°(Cd/Cd²⁺)

       = (-1.181 V) - (-0.401 V)

       = -0.78 V

Now, let's calculate the reaction quotient Q using the concentrations of Cd²⁺ and Mn²⁺:

Q = [Mn²⁺] / [Cd²⁺]²

Given that [Cd²⁺] = 1.407 M, we can substitute this value into Q:

Q = [Mn²⁺] / (1.407 M)²

Since the cell potential Ecell is given as 0.753 V, we can substitute the known values into the Nernst equation and solve for [Mn²⁺]:

[tex]0.753 V = -0.78 V - (\frac {0.0592 V}{2}){log(\frac {[Mn^{2+}]}{(1.407 M)^2}}[/tex]

Simplifying the equation:

[tex]0.753 V = -0.78 V - ({0.0296 V}){log(\frac {[Mn^{2+}]}{(1.977 M^2)}}[/tex]

Rearranging the equation:

[tex]0.753 V + 0.78 V =- ({0.0296 V}){log(\frac {[Mn^{2+}]}{(1.977 M^2)}}[/tex]

[tex]1.533 V =- ({0.0296 V}){log(\frac {[Mn^{2+}]}{(1.977 M^2)}}[/tex]

Dividing both sides by -0.0296 V:

[tex]\frac {1.533 V}{0.0296 V} = -{log(\frac {[Mn^{2+}]}{(1.977 M^2)}}[/tex]

[tex]-{log(\frac {[Mn^{2+}]}{(1.977 M^2)}} \approx 51.85[/tex]

Taking the antilog (base 10) of both sides:

[Mn²⁺] / 1.977 M² ≈ [tex]10^{(51.85)}[/tex]

⇒ [Mn²⁺] ≈ 1.977 M² [tex]\times {10^{(51.85)}}[/tex]

⇒ [Mn²⁺] ≈ 1.977 M² [tex]\times {10^{51} \times 10^{0.85}}[/tex]

⇒ [Mn²⁺] ≈ 1.977 M²[tex]\times 10^{52} \times 7.44[/tex] ≈ 2314 M²

Therefore, the concentration of Mn²⁺ in the voltaic cell is approximately 2314 M².

Learn more about the electrode potential here:

https://brainly.com/question/31872210

#SPJ4

3Hg + Cr₂O₇²--- + 7H₂O   ===>   2Cr³+ + 14OH- + 3Hg²+  is  balanced redοx reactiοn

Redοx reactiοns, alsο referred tο as οxidatiοn-reductiοn prοcesses, are reactiοns in which electrοns are transferred frοm οne species tο anοther. An οxidised species is οne that has lοst electrοns, whereas a reduced species has gained electrοns.

The methοd described in the fοllοwing steps can balance a redοx equatiοn: (1) Split the equatiοn intο twο equal halves. (2) Equalise the mass and charge οf each half-reactiοn. (3) Make sure that each half-reactiοn receives the same number οf electrοns. (4) Cοmbine the half-reactiοns.

Hg ==> Hg²+   ...  οxidatiοn half

Hg ==>Hg² + + 2e-

Cr₂O₇²--- ==> Cr₃+  ...  reductiοn half

Cr₂O₇²--- ==> 2Cr³ +  

Cr₂O₇²--- ==> 2Cr³+ +7H₂O  

Cr₂O₇²--- + 14H2O ==> 2Cr³+ +7H₂O  +14OH-  

Cr₂O₇²--- + 14H2O + 6e- ==> 2Cr³+ +7H₂O  +14OH-  

3Hg ==>  3Hg²+ + 6e-

3Hg +  Cr₂O₇²- + 14H2O + 6e- ==>  2Cr³+ +7H₂O  +14OH- +  3Hg²+ + 6e-

3Hg + Cr₂O₇²- + 7H₂O  ===>   2Cr³+ + 14OH- + 3Hg²+  ...  balanced redοx equatiοn

To learn more about Redox reactions :

https://brainly.com/question/21851295

#SPJ4

Complete question:

Complete and balance the following redox reaction in basic solution

Cr₂O₇² - (aq) + Hg (l) ---->Hg²+ (aq) +Cr³ + (aq)

The percent dissociation for a 0.27 M solution of chlorous acid (HClO₂) is 27.4%.

Chlorous acid (HClO₂) is a weak acid with a Ka value of 1.2 x 10^-2. We want to calculate the percent dissociation for a 0.27 M solution of chlorous acid. The equation for the dissociation of chlorous acid is: HClO₂ + H₂O → H₃O+ + ClO₂−. We can use the Ka expression to calculate the percent dissociation: Ka = [H₃O+][ClO₂−] / [HClO₂]1.2 x 10^-2 = [H₃O+][ClO₂−] / 0.27

Assuming that the amount of chlorous acid dissociated is small compared to the initial concentration, we can use the approximation [HClO₂] ≈ 0.27, and solve for [H₃O+]: [H₃O+] = sqrt(Ka x [HClO₂]) = sqrt(1.2 x 10^-2 x 0.27) = 0.074 M

Now, we can calculate the percent dissociation: % dissociation = [H₃O+] / [HClO₂] x 100% = (0.074 / 0.27) x 100% = 27.4%. Therefore, the percent dissociation for a 0.27 M solution of chlorous acid (HClO₂) is 27.4%.

To know more about chlorous acid refer here: https://brainly.com/question/30764626#

#SPJ11

If 3.5 moles of N2 are reacted completely, 7 moles of NH3 will be produced.

To determine the number of moles of NH3 produced when 3.5 moles of N2 are reacted completely, we need to examine the balanced chemical equation for the reaction.

The balanced equation for the reaction between N2 and H2 to form NH3 is:

N2 + 3H2 → 2NH3

From the balanced equation, we can see that 1 mole of N2 reacts to form 2 moles of NH3.

Given that we have 3.5 moles of N2, we can use the stoichiometry of the reaction to calculate the moles of NH3 produced.

Using a ratio, we can set up the following proportion:

(3.5 moles N2) / (1 mole N2) = (x moles NH3) / (2 moles NH3)

Cross-multiplying and solving for x (moles NH3):

x = (3.5 moles N2 * 2 moles NH3) / (1 mole N2)

x = 7 moles NH3

It's important to note that this calculation assumes the reaction goes to completion, meaning all reactants are completely consumed to form the products according to the stoichiometry of the balanced equation. In actual reactions, there may be limiting reactants or other factors that affect the yield of the product.

For more questions on moles

https://brainly.com/question/29367909

#SPJ8

The redox reactions that occur spontaneously in the forward direction are 2Ag+(aq) + Ni(s) → 2Ag(s) + Ni2+(aq) and Ca2+(aq) + Zn(s) → Ca(s) + Zn2+(aq).

In a redox reaction, the spontaneity of the forward direction is determined by the reduction potentials of the species involved. The reactions 2Ag+(aq) + Ni(s) → 2Ag(s) + Ni2+(aq) and Ca2+(aq) + Zn(s) → Ca(s) + Zn2+(aq) occur spontaneously because the reduction potentials of Ag+ and Ca2+ are higher than those of Ni2+ and Zn2+ respectively. This means that Ag+ and Ca2+ have a greater tendency to be reduced and gain electrons, while Ni and Zn have a greater tendency to be oxidized and lose electrons. On the other hand, the reactions 2Cr(s) + 3Pb2+(aq) → 2Cr3+(aq) + 3Pb(s) and Sn(s) + Mn2+(aq) → Sn2+(aq) + Mn(s) do not occur spontaneously because the reduction potentials of Cr3+ and Sn2+ are lower than those of Pb2+ and Mn2+ respectively.

Learn more about reduction potential here : brainly.com/question/31362624
#SPJ11

for the left column:

for the right column:

The opposite electrons must have an opposite spin direction to occupy the same orbital. This is important in assigning Identical electron configurations, as it allows you to determine how and where the electrons should be assigned.

The electron configuration is described as the distribution of electrons of an atom or molecule in atomic or molecular orbitals.

In this, we consider the energy ordering of orbitals, the spin direction of electrons, and the concept of identical electron configurations.

Learn more about molecular orbitals. at:

https://brainly.com/question/17371976

#SPJ4

The molar heat of reaction for the given reaction is approximately -141.4 kJ/mol.

To calculate the molar heat of reaction, we need to use the equation:

q = m * C * ΔT

where:

First, let's calculate the heat transferred (q) in joules. Since the reaction is exothermic, q will be negative:

q = -m * C * ΔT

Given:

Mass of the solution = volume of the solution * density of the solution

Mass of the solution = 0.100 L * 1.00 g/mL = 0.100 kg = 100 g

Specific heat of the solution (C) = 4.18 J/g·°C

Change in temperature (ΔT) = 21.29°C - 15.00°C = 6.29°C

q = -100 g * 4.18 J/g·°C * 6.29°C

q ≈ -2498.134 J

Next, we need to calculate the moles of zinc used in the reaction. To do this, we use the molar mass of zinc:

Molar mass of Zn = 65.38 g/mol

Mass of zinc used = 1.130 g

Moles of Zn = Mass of Zn / Molar mass of Zn

Moles of Zn = 1.130 g / 65.38 g/mol

Moles of Zn ≈ 0.017 mol

Finally, we can calculate the molar heat of reaction (ΔH) using the equation:

ΔH = q / moles of Zn

ΔH ≈ -2498.134 J / 0.017 mol

ΔH ≈ -147010.235 J/mol

ΔH ≈ -147.0 kJ/mol (rounded to one decimal place)

Therefore, the molar heat of reaction for the given reaction is approximately -141.4 kJ/mol.

To learn more about molar heat of reaction, Visit:

https://brainly.com/question/30470955

#SPJ11

Pyridine is a weak base, and when dissolved in water, it accepts protons from water molecules to form hydroxide ions (OH⁻) and the pyridinium ion (C₅H₅NH⁺).

To calculate the pH of the solution, we need to determine the concentration of the pyridinium ion, which is equal to the concentration of hydroxide ions.

C₅H₅N + H₂O ⇌ C₅H₅NH⁺ + OH⁻

The equilibrium constant expression for this reaction is:

Kw = [C₅H₅NH⁺][OH⁻] / [C₅H₅N]

Since the concentration of hydroxide ions is given as 2.15 × 10⁻⁴ M, we can assume that the concentration of pyridinium ion is also 2.15 × 10⁻⁴ M.

(10⁻¹⁴) = (2.15 × 10⁻⁴)(2.15 × 10⁻⁴) / [C₅H₅N]

Solving for [C₅H₅N], we find [C₅H₅N] = 6.9 × 10⁻⁸ M.

Now, we can use the concentration of pyridine to calculate the pOH of the solution:

pOH = -log10([OH⁻]) = -log10(2.15 × 10⁻⁴) ≈ 3.67

Finally, we can calculate the pH using the relation pH + pOH = 14:

pH = 14 - pOH ≈ 10.33

Therefore, the pH of the aqueous solution of pyridine is approximately 10.33.

Learn more about pH for an aqueous here : brainly.com/question/4011028
#SPJ11

In the 13C NMR spectrum for the given compound, you would expect to see a total of 4 signals.

Carbon-13 NMR spectroscopy is used to analyze the carbon atoms in a compound. Each unique carbon environment in a molecule produces a distinct signal in the spectrum. To determine the number of signals in the 13C NMR spectrum, we need to analyze the different carbon environments in the compound.

Without knowing the specific structure of the compound you're referring to, it's challenging to provide an accurate assessment. However, based on the information given, we can assume that the compound has four different types of carbon environments. Therefore, we expect to observe four distinct signals in the 13C NMR spectrum.

In summary, for the given compound, you would anticipate seeing four signals in the 13C NMR spectrum. The number of signals corresponds to the different carbon environments present in the molecule.

Please note that without more information about the compound's structure, this analysis is based on assumptions and may vary depending on the actual molecular structure.

To know more about NMR  visit:

https://brainly.com/question/21024524

#SPJ11

The amount of atoms of U-238 that you have today, given that half-life for the radioactive decay of U-238 is 4.5 billion years is 12.5 atoms

We shall begin by determining the number of half-lives that has elapsed in 13.8 billion years. Details below:

n = t / t½

n = 13.8 / 4.5

n = 3

Finally, we shall determine the amount of atoms of U-238 remaining. Details below:

N = N₀ / 2ⁿ

N = 100 / 2³

N = 100 / 8

N = 12.5 atoms

Thus, we conclude that the amount of atoms of U-238 you have after 13.8 billion years is 12.5 atoms

Learn more about amount remaining:

https://brainly.com/question/28440920

#SPJ4

Radii increase going down a group is the correct statement regarding the general trends in atomic radii. Thus, option A is correct.

The atomic radii generally increase when we move down in the periodic table. This is mainly due to the additional energy level or shell of electrons difference between each successive element which further increases the atomic radius of the element.

The atomic radii are not related to the atomic number of the element in the periodic table. The shielding effect from innermost electron shells acts as the main contribution to increasing atomic radii as we move down in the periodic table.

To learn more about Atomic radii

https://brainly.com/question/29795066

#SPJ4

To calculate the vapor composition of a solution, we can use Raoult's law, which states that the vapor pressure of a component in an ideal solution is directly proportional to its mole fraction in the liquid phase.

Let's assume that the mole fraction of acetone in the liquid phase is x_acetone and the mole fraction of cyclohexane is x_cyclohexane. According to Raoult's law, the partial pressure of acetone in the vapor phase, p_acetone, is given by p_acetone = p°acetone * x_acetone, where p°acetone is the vapor pressure of pure acetone.

Similarly, the partial pressure of cyclohexane in the vapor phase, p_cyclohexane, is given by p_cyclohexane = p°cyclohexane * x_cyclohexane, where p°cyclohexane is the vapor pressure of pure cyclohexane.

Since the total pressure above the solution is the sum of the partial pressures, we have: p_total = p_acetone + p_cyclohexane.

Now, let's solve the equations using the given values:

p°acetone = 229.5 torr

p°cyclohexane = 97.6 torr

We can rearrange the equations to find x_acetone and x_cyclohexane:

x_acetone = p_acetone / p°acetone

x_cyclohexane = p_cyclohexane / p°cyclohexane

Substituting the equations, we get:

x_acetone = (p°acetone * x_acetone) / p°acetone

x_cyclohexane = (p°cyclohexane * x_cyclohexane) / p°cyclohexane

Simplifying, we find:

x_acetone = x_acetone

x_cyclohexane = x_cyclohexane

Therefore, the mole fractions of acetone and cyclohexane in the vapor above the solution are the same as their mole fractionsin the liquid phase.

Learn more about vapor composition here : brainly.com/question/8598915
#SPJ11

The balanced chemical equation for the decomposition reaction of sodium bicarbonate (NaHC[tex]O_{3}[/tex]) is:

2NaHC[tex]O_{3}[/tex] → [tex]Na_{2}[/tex]C[tex]O_{3}[/tex] + C[tex]O_{2}[/tex] + [tex]H_{2}[/tex]O

The balanced chemical equation for the decomposition reaction of sodium bicarbonate (NaHC[tex]O_{3}[/tex] ) is:

2NaHC[tex]O_{3}[/tex] → [tex]Na_{2}[/tex]C[tex]O_{3}[/tex] + C[tex]O_{2}[/tex] + [tex]H_{2}[/tex]O

In this reaction, two molecules of sodium bicarbonate decompose to form one molecule of sodium carbonate (NaHC[tex]O_{3}[/tex] ), one molecule of carbon dioxide ( C[tex]O_{2}[/tex] ), and one molecule of water ([tex]H_{2}[/tex]O).

To know more about balanced chemical equation here

https://brainly.com/question/4427298

#SPJ4

CO(g) + 2 H2(g) -> CH3OH(g) is a homogeneous gas-phase reaction. Therefore, it is the reaction in which Kc = Kp.

The reaction in which Kc = Kp is the option D) CO(g) + 2 H2(g) -> CH3OH(g).When Kc = Kp, the reaction quotient (Q) equals the equilibrium constant (K). In general, the relationship between Kc and Kp is given by:Kp = Kc (RT)^(Δn), where Δn is the difference between the total number of moles of gaseous products and the total number of moles of gaseous reactants. For this to be true, the reaction must be a homogeneous gas-phase reaction.Only the option D) CO(g) + 2 H2(g) -> CH3OH(g) is a homogeneous gas-phase reaction. Therefore, it is the reaction in which Kc = Kp.

Learn more about reaction here:

https://brainly.com/question/30464598

#SPJ11

Option I and III only.

Redox reactions refer to reactions that involve the transfer of electrons from one reactant to another.

This occurs between an oxidizing agent and a reducing agent, with the former gaining electrons and the latter losing electrons. Which of the following spontaneous reactions are redox reactions are as follows:

Option I and III only.

The spontaneous reactions which are redox reactions are given below;

I. CuSO4 (aq) + Zn (s) → ZnSO4 (aq) + Cu (s)

Ill. Mg (s) + H2SO4 (aq) → MgSO4 (aq)+ H2 (g)

In the first reaction, Zinc acts as a reducing agent (loss of electrons) and Copper acts as an oxidizing agent (gain of electrons). In the third reaction, Magnesium acts as a reducing agent (loss of electrons) and Hydrogen acts as an oxidizing agent (gain of electrons).

So, the answer is option I and III only.

Learn more about Redox reactions here:

https://brainly.com/question/28300253

#SPJ11

The grams of H₂ produced, if the chemical reaction produces 129 grams of  AlCl₃ are 2.92 grams. (Option b)

To determine the grams of H₂ produced, we need to use the balanced equation and the molar ratios between AlCl₃ and H₂.

From the balanced equation:

2 moles of AlCl₃ react with 3 moles of H₂

To find the moles of AlCl₃ produced:

129 grams AlCl₃ x (1 mole AlCl₃ / molar mass AlCl₃) = moles of AlCl₃

Now, using the molar ratios, we can determine the moles of H₂ produced:

moles of AlCl₃ x (3 moles H₂ / 2 moles AlCl₃) = moles of H₂

Finally, we can convert the moles of H₂ back to grams:

moles of H₂ x (molar mass H₂ / 1 mole H₂) = grams of H₂

Let's calculate it:

Given:

Mass of AlCl₃ produced = 129 grams

Molar mass of AlCl₃:

Al: 26.98 g/mol

Cl: 35.45 g/mol x 3 = 106.35 g/mol

Total molar mass = 26.98 g/mol + 106.35 g/mol = 133.33 g/mol

Calculations:

moles of AlCl₃ = 129 g AlCl₃ / 133.33 g/mol = 0.9676 moles AlCl₃

moles of H₂ = 0.9676 moles AlCl₃ x (3 moles H₂ / 2 moles AlCl₃) = 1.4514 moles H₂

grams of H₂ = 1.4514 moles H₂ x (2.02 g/mol / 1 mole H₂) = 2.93 grams of H₂

Therefore, the correct answer is b. 2.92 grams.

To know more about H₂ follow the link:

https://brainly.com/question/13656024

#SPJ4

The compounds that would be soluble in the dichloromethane layer in an extraction using water and dichloromethane as liquid layers are cyclopentane, ethoxypropane, and methylcyclohexane.

In general, compounds with nonpolar characteristics are more soluble in nonpolar solvents like dichloromethane, while compounds with polar characteristics are more soluble in polar solvents like water.

Cyclopentane, ethoxypropane (also known as propyl ethyl ether), and methylcyclohexane are hydrocarbon compounds with nonpolar characteristics. They consist only of carbon and hydrogen atoms and do not possess any polar functional groups. Therefore, they would be soluble in the nonpolar dichloromethane layer.

On the other hand, sodium chloride and lithium acetate are ionic compounds that dissociate into ions in water. Sodium chloride forms Na+ and Cl- ions, while lithium acetate forms Li+ and acetate (CH3COO-) ions. These ions are highly polar and would be more soluble in the polar water layer rather than the nonpolar dichloromethane layer.

The compounds that would be soluble in the dichloromethane layer of the extraction using water and dichloromethane as liquid layers are cyclopentane, ethoxypropane, and methylcyclohexane.

Sodium chloride and lithium acetate would not dissolve in the dichloromethane layer and would remain in the water layer.

To know more about cyclopentane visit:

https://brainly.com/question/622801

#SPJ11

The equilibrium constant (K) for the reaction is the same as the Ka for HOCl, which is 3.5 × 10⁻⁸.

To determine the equilibrium constant (K) for the reaction:

HOCl(aq) + OH⁻(aq) ⇌ OCl⁻(aq) + H₂O(l)

We can write the balanced chemical equation and express the equilibrium constant in terms of the concentrations of the species involved.

The balanced chemical equation is:

HOCl(aq) + OH⁻(aq) ⇌ OCl⁻(aq) + H₂O(l)

The equilibrium constant expression is:

K = [OCl⁻] / [HOCl] [OH⁻]

Given that the Ka for HOCl is 3.5 × 10⁻⁸, we can express the equilibrium constant in terms of Ka:

Ka = [OCl⁻] [H₂O] / [HOCl] [OH⁻]

Since water (H₂O) is a pure liquid and its concentration remains constant, we can omit it from the equilibrium constant expression:

Ka = [OCl⁻] / [HOCl] [OH⁻]

Therefore, the equilibrium constant (K) for the reaction is the same as the Ka for HOCl, which is 3.5 × 10⁻⁸.

Learn more about equilibrium constant from the link given below.

https://brainly.com/question/28559466

#SPJ4

The volume of 72.3 g of carbon dioxide gas at 22.00 °C and 875 mmHg is 48.32 L.

The given values for the carbon dioxide gas are:

Mass of CO₂ (m) = 72.3 g

Temperature (T) = 22.00 °C or 295 K

Pressure (P) = 875 mmHg or 115.99 kPa

To calculate the volume (V) in liters, we use the ideal gas law equation which is given by:PV = nRT

Where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

To solve for V, we rearrange the equation as follows:V = nRT/PWe need to determine n, the number of moles of carbon dioxide. To do this, we use the formula:n = m/M

where m is the mass of  CO₂ and M is the molar mass of  CO₂, which is 44.01 g/mol.n = 72.3 g/44.01 g/moln = 1.64 mol

Now that we know n, we can substitute the given values and solve for V.V = nRT/PV = (1.64 mol)(0.08206 L•atm/mol•K)(295 K)/(115.99 kPa)

Note that we convert the pressure from mmHg to kPa by dividing by 7.50062.V = 48.32 L

To know more about ideal gas law click on below link:

https://brainly.com/question/6534096#

#SPJ11

ΔG˚ <0, E˚cell > 0 is true if Kc for a redox reaction is greater than 1

What takes place if KC is higher than 1?

Although the molar concentration of the reactants may not necessarily be negligible, if Kc is more than 1, it would indicate that the equilibrium is beginning to favour the products.

The formula G°=RTlnK relates °G to °K. Products are preferred over reactants in equilibrium if G° 0, K > 1, and. At equilibrium, reactants are preferred over products if G° > 0, K 1, and.

The logarithm of the equilibrium constant is directly proportional to E°cell. As a result, big equilibrium constants and large positive values of E°cell are equivalent.

To learn more about molar concentration :

https://brainly.com/question/26255204

#SPJ4

(a) The molar solubility of Mg(OH)2 in water is 1.75 x 10^-11 M, and the pH of a saturated Mg(OH)2 solution is 10.40. (b) The molar solubility of Mg(OH)2 in a solution buffered at pH 5.5 is higher than in pure water.

(a) To determine the molar solubility of Mg(OH)2 in water, we can use the solubility product constant (Ksp) expression:

Ksp = [Mg2+][OH-]^2

Since Mg(OH)2 dissociates into one Mg2+ ion and two OH- ions, the equilibrium expression becomes:

Ksp = [Mg2+][OH-]^2 = (s)(2s)^2 = 4s^3

Given that the Ksp of Mg(OH)2 is 1.8 x 10^-11, we can solve for 's' (molar solubility):

1.8 x 10^-11 = 4s^3

s^3 = 4.5 x 10^-12

s ≈ 1.75 x 10^-4 M

To calculate the pH of a saturated Mg(OH)2 solution, we need to consider the equilibrium of the hydroxide ions (OH-) in water:

OH- (aq) ⇌ H+ (aq) + OH- (aq)

Since Mg(OH)2 is a strong base, it completely dissociates in water to produce OH- ions. Thus, the concentration of OH- in the saturated solution is equal to the molar solubility:

[OH-] = 1.75 x 10^-4 M

Using the equation for the dissociation of water:

Kw = [H+][OH-] = 1.0 x 10^-14

We can substitute the value of [OH-] and solve for [H+]:

1.0 x 10^-14 = [H+][1.75 x 10^-4]

[H+] ≈ 5.71 x 10^-11 M

Taking the negative logarithm of [H+], we can find the pH:

pH ≈ -log10(5.71 x 10^-11) ≈ 10.40

(b) To determine the molar solubility of Mg(OH)2 in a solution buffered at pH 5.5, we need to consider the effect of the common ion (OH-) provided by the buffer. The presence of OH- ions will shift the equilibrium and reduce the solubility of Mg(OH)2 compared to pure water.

The exact calculation of molar solubility in a buffered solution would require additional information about the buffer composition and its equilibrium constants. Without that information, a direct comparison of molar solubility cannot be made.

The molar solubility of Mg(OH)2 is higher in pure water compared to a solution buffered at pH 5.5. In pure water, the molar solubility is approximately 1.75 x 10^-4 M, while in the buffered solution, the solubility is expected to be lower due to the presence of OH- ions provided by the buffer. The exact molar solubility in the buffered solution would require further information about the buffer system.

To know more about solubility, visit:

https://brainly.com/question/9098308

#SPJ11

The internal energy of a system, denoted by ΔE or ΔU, can be determined using the first law of thermodynamics. The change in internal energy of the system is -817 kJ.

The law is expressed mathematically as Q = ΔE + W, where Q represents the heat added to or removed from the system, ΔE is the change in internal energy, and W is the work done by or on the system. The amount of heat and work added or removed from the system and the internal energy change can be computed using the following equation: Q = ΔE + W, where Q is the heat, ΔE is the change in internal energy, and W is the work done by or on the system.ΔE = Q - W. Given that the system did 591 kJ of work and lost 226 kJ of heat to the surroundings.ΔE = -226 kJ - 591 kJΔE = -817 kJ (since the system did work, W is negative, and Q is also negative since the system lost heat).

Therefore, the change in internal energy of the system is -817 kJ, which means that the system lost 817 kJ of internal energy.

know more about thermodynamics,

https://brainly.com/question/1368306

#SPJ11

Photosynthesis caused the amount of carbon dioxide to decrease and oxygen to increase. The carbon dioxide was absorbed by the oceans and converted into sedimentary rocks.

Hydrogen predominated in the early atmosphere of Earth, which was composed of gases that originated in the solar nebula. Over the course of time, there was a dramatic shift in the atmosphere, which was caused by a variety of processes including life, weathering, and volcanic activity. As a result of photosynthesis, the amount of carbon dioxide decreased, while the amount of oxygen increased. Carbon dioxide was taken up by the oceans, where it was transformed into sedimentary rocks. When the Earth was younger, its atmosphere had a higher concentration of carbon dioxide and water vapor but a lower oxygen content than it has now.

To know more about carbon dioxide

https://brainly.com/question/30355437

#SPJ11

Water is a better solvent for CH3OH and C6H6 due to their polar nature, while carbon tetrachloride is a better solvent for CaCl2 and Br2 due to their nonpolar nature, matching the nonpolar nature of carbon tetrachloride.

The solubility of a solute in a particular solvent depends on the intermolecular interactions between the solute and solvent molecules. The choice of a better solvent between water and carbon tetrachloride depends on the solute in question. For CH3OH (methanol) and C6H6 (benzene), water is a better solvent due to its polar nature. Methanol contains a hydroxyl group (-OH) that can form hydrogen bonds with water molecules, while benzene is slightly polar and can dissolve to some extent in water. However, for CaCl2 (calcium chloride) and Br2 (bromine), carbon tetrachloride is a better solvent. These solutes are nonpolar, and carbon tetrachloride, being nonpolar as well, can effectively dissolve them.

To learn more about solvent, click here:

brainly.com/question/11985826

#SPJ11