Answers
2.79 eV
Explanation:Given
The wavelength, λ = 445 nm
The planck's constant, h = 6.626 x 10^-34 m² kg/s
The speed of light, c = 3 x 10^8 m/s
The energy of the photon is calculated as:
[tex]\begin{gathered} E=\frac{hc}{\lambda} \\ \\ E=\frac{6.626\times10^{-34}\times3\times10^8}{445\times10^{-9}} \\ \\ E=\frac{6.626\times3}{445}\times10^{-34+8+9} \\ \\ E=0.0447\times10^{-17} \\ \\ E=4.47\times10^{-2}\times10^{-17} \\ \\ E=4.47\times10^{-19}J \end{gathered}[/tex]But, 1 eV = 1.6 x 10^-19J
[tex]\begin{gathered} E=\frac{4.47\times10^{-19}}{1.6\times10^{-19}} \\ \\ E=2.79eV \end{gathered}[/tex]Related Questions
Exit Slip!
Explain how Earth's tilted
axis and its revolution
around the Sun produces
seasons.
Answers
Earth's tilted axis and revolution around the sun causes the seasons.
Different parts of Earth receive the Sun's direct rays, throughout the year. So, it's summer in the Northern Hemisphere when the North Pole tilts toward the Sun. It's winter in the Northern Hemisphere when south Pole tilts toward the Sun.
As we know that the Earth rotates with a constant speed, so that every hour the direct beam will traverse across a single standard meridian. Rotation of Earth 15 degrees is equivalent to unit of one hour . When Earth rotates in such a way that the beam of the sun shifts +1∘ of longitude from East to West and time taken is 4 minutes.
The tilt of the Earth's axis is important because it governs the strength of warming of the sun's energy. The tilt of the surface of the Earth also causes light to be spread across a larger area of land which is termed as called the cosine projection effect.
To know more about earth and seasons, refer
https://brainly.com/question/15734021
#SPJ13
Sound _____. does not need a medium to travel is reflected when it bounces off a shiny surface moves in longitudinal waves is created by electric and magnetic fields
Answers
Answer:
reflection
Explanation:
it is a regular reflaction of light
FPressure is a function of force and area on which the force is exerted: P =AWhat is the effect of an increase in temperature of a sealed container of gaswith no change in volume?hA. The change in temperature decreases the force of the collisions ofthe container and gas particles, so the pressure decreases.B. The change in temperature increases the force of the collisions ofthe container and gas particles, so the pressure increases.C. The change in temperature decreases the area over whichcollisions of the container and gas particles occur, so the pressureincreases.D. The change in temperature increases the area over whichcollisions of the container and gas particles occur, so the pressuredecreases.
Answers
B: The change in temperature increases the force of the collisions of
the container and gas particles, so the pressure increases.
P = F/A
Force is directly proportional to Force, so , if force increases also Pressure.
Review the statements below. Select the one that best describes the difference between astronomy and cosmology.
A) Astronomy is a much broader study of the universe as a whole, while cosmology is a more focused study on specific objects or celestial bodies contained within the universe.
B) Astronomy is the study of objects in the universe—how they are formed, their composition, and how they change over time. Cosmology is the study of the entire universe—what objects are contained in the universe, and what is happening to the universe over time, including how it may or may not end.
C) Astronomy is a branch of science that focuses on the beginning, middle, and end of the universe. Cosmology is the study of how objects move, interact, and change.
D) Astronomy is the study of space in general through the use of telescopes and other tools, while cosmology is the study of specific objects in space.
Answers
The statement that correctly differentiates between astronomy and cosmology is as follows: Astronomy is a much broader study of the universe as a whole, while cosmology is a more focused study on specific objects or celestial bodies contained within the universe (option A).
What is astronomy?Astronomy is the study of the physical universe beyond the Earth's atmosphere, including the process of mapping locations and properties of the matter and radiation in the universe.
On the other hand, cosmology is the study of the physical universe, its structure, dynamics, origin and evolution, and fate.
Astronomy studies objects and phenomena beyond Earth, whereas cosmology is a branch of astronomy that studies the origin of the universe and how it has evolved.
Therefore, it can be said that astronomy studies the universe from a much broader sense while cosmology is much more specific study.
Learn more about astronomy at: https://brainly.com/question/1826143
#SPJ1
POSSIBLE POINTS: 2The graph below shows the relationship between the force acting on an object and the acceleration of the object. What is the acceleration of the objectwhen a 3 - newton force acts on it?____________What is the object's mass? ____________
Answers
From the graph we notice that when the force is 3 N the acceleration is 0.6 meters per second per second.
Now, to find the mass we use Newton's second law:
[tex]F=ma[/tex]for the point we found earlier we have:
[tex]\begin{gathered} 3=0.6m \\ m=\frac{3}{0.6} \\ m=5 \end{gathered}[/tex]Therefore the mass of the object is 5 kg
A spaceship of mass m has its engines switched off and is moving in a circular orbit at
height R above the surface of a planet of mass M and radius R.
a) Derive an expression for total mechanical energy E of the orbiting spaceship, in terms of G, m,
M and R.
b) Derive an expression for the minimum speed V the spaceship would need to escape from this
orbit into deep space, in terms of system parameters. (The engines can’t fire for the whole trip;
they can only give the spaceship one boost so it obtains this velocity. Ignore all other celestial
objects.)
Answers
The total mechanical energy of a spaceship will be E = - GMm/2(R+h)
which is moving in circular orbit at height R above the surface of a planet of mass M and radius R . Here, m is the mass of spaceship and G is gravitational force.
Mechanical energy, also known as kinetic energy or potential energy, is the energy that an object possesses when it is in motion or the energy that an object stores due to its location. Renewable energy is also fueled by mechanical energy. In order to efficiently produce electricity or convert energy, many sources of renewable energy depend on mechanical energy.The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of the distance between them, according to Newton's universal law of gravitation.Therefore, when the engine of spaceship of mass (m) is switch offed and moving in circular orbit of a planet at height R above the surface of a planet of mass M and radius R then the mechanical energy is given by
E = - GMm/2(R+h)
To know more about mechanical energy
https://brainly.com/question/28821645
#SPJ1
An object is placed in front of a concave mirror between the center of curvature of the mirror and its focal point as shown in the diagram below three light rays are traced along with their corresponding reflected rays which statement below best describes the image formed
Answers
Given:
An object is placed in front of a concave mirror between the center of curvature of the mirror and its focal point.
To find:
The type of the image
Explanation:
The image is real if the rays after reflection from the mirror actually meet.
Here, the object is placed in front of a concave mirror between the center of curvature of the mirror and its focal point.
The rays after reflection actually meet. So, the image is real.
Hence, the image is real.
A 2.55kg block on a horizontal floor is attached to a horizontal spring that is initially compressed 0.0360m . The spring has force constant 870N/m . The coefficient of kinetic friction between the floor and the block is 0.45 . The block and spring are released from rest and the block slides along the floor.
What is the speed of the block when it has moved a distance of 0.0200 m from its initial position? (At this point the spring is compressed 0.0160 m .)
Answers
The speed of the block when it has moved a distance of 0.0200 m from its initial position is 0.29 m/s.
The mass of the block is 2.55 Kg. Coefficient of kinetic friction is 0.45. Spring constant is 870N/m. The final compression of the spring is 0.0160 meters. The block is moved by distance of 0.0200 meters.
By considering the block-spring system, we can use Work energy theorem here,
According to work energy theorem,
Work done by conservative forces on the body + Work done by none conservative forces = Total change in kinetic energy of the body.
Work done by Conservative forces = 1/2Kx².
Where,
K is spring constant,
x is the compression in spring,
Work done by non-conservative forces = umgd
Where,
u is the coefficient of kinetic friction,
m is mass of the block,
d is the distance by which the block moves,
Here, we will take spring force as positive because the spring force and displacement both are in same direction,
Putting all the values,
1/2Kx² - umgd = 1/2mV² - 1/2mU²
1/2(870)(0.016)² - 0.45(2.55)(9.8)(0.02) = 1/2(2.55)V²
0.11136 - 0.22491= (1.275)V²
0.11355/1.275 = V²
V = 0.29 m/s.
To know more about work-energy theorem, visit,
https://brainly.com/question/22236101
#SPJ1
What is the acceleration of a car,
moving along a straight line, that
increases its velocity from 0 to 15
m/s in 10 s?
Answers
The acceleration of a car, moving along a straight line, that increases its velocity from 0 to 15 is A=1.5m/s.
Acceleration = Velocity Change / Time Interval
So,
A=15/10
A=1.5m/s .
A slowing car slows down. It also accelerates because the speed changes. Imagine a car driving down the street. As speed increases, the car has positive acceleration. When a car turns a corner at a constant speed it changes direction and thus accelerates. The faster the rotation the greater the acceleration.
Therefore, any change in velocity in magnitude and direction causes acceleration. The main causes of poor acceleration are air and fuel issues and sensor issues. However mechanical problems can also cause poor performance. The car is moving forward and accelerating in the positive direction so the acceleration is in the same direction as the car is moving. An object can also have positive acceleration if it slows down while moving in a negative direction.
Learn more about The acceleration here:-https://brainly.com/question/14344386
#SPJ1
Imagine you are an alien from a distant galaxy. Your home planet does not have any gravity. You have just landed on Earth and make a few observations about the planet.
What are some ways you might first observe gravity?
How might you test gravitational force?
How would you describe gravity to other aliens back at your home planet?
Use details to support your answer.
Answers
The first thing an alien would notice about gravity on earth is how it affects their movement. If their planet is closer to the sun in their solar system, they'd be accustomed to a higher pull of gravity, hence weight. Based on the above, an alien will feel lighter on earth without auto-assistive gravity adjuster technology.
The simplest way to test gravity is by comparing my weight using "homemade" scales on the ship, then checking that against my weight off the ship.
The simplest way to describe Earth's gravity to those the home planet is to use scientific language. The acceleration of gravity at the Earth's surface is approximately 9.8 meters (32 feet) per second every second. This is constant.
What is Gravity?Gravity, often known as gravitation, is a force that exists between all physical things in the universe. The force of gravity seeks to draw any two objects or particles with nonzero mass toward one other. Gravity affects things of all sizes, from subatomic particles to galaxy clusters.
Einstein proposed that the geometry of spacetime is what causes the force we call gravity. A mass (or energy) concentration, such as the Earth or sun, bends space around it in the same way as a boulder bends the flow of a river. As a result, gravity was created.
Learn more about Gravity:
https://brainly.com/question/557206
#SPJ1
What is the electric field between the plates of a capacitor that has a charge of 10.75 microC and voltage difference between the plates of 97.87 Volts if the plates are separated by 2.11 mm?
Answers
The eletric field on a capacitor is given by the following formula:
[tex]E=\frac{Q}{A\epsilon_0}=\frac{V}{d}[/tex]Where Q is the difference of charge between plates, A is the area, and e0 is a constant. It can also be written as the second formula, where V is the voltage, and d is the distance between plates.
When we use the second formula, with the values from the exercise, we get:
[tex]E=\frac{97.87}{2.11*10^{-3}}=46383.886[\frac{V}{m}][/tex]Thus, our final answer is E=46383.886 V/m
Jack drops off 10m high red bridge into swimming waters below. Assuming acceleration to be 9.91 m/s^2
A. What Jack speed as he hits the water?
Answers
Jack speed as he hits the water is 14.13m/s
What is speed?
The speed of an object, also known as v in kinematics, is the size of the change in that object's position over time or the size of the change in that object's position per unit of time, making it a scalar quantity. The instantaneous speed is the upper limit of the average speed as the duration of the time interval approaches zero. The average speed of an item in a period of time is equal to the distance travelled by the object divided by the duration of the period. Velocity and speed are not the same thing.
The only force on Jack is gravity, which points straight down, and has an acceleration of 9.91m/s². Whether he's falling off a bridge or simply standing still on the surface of the earth, the acceleration due to gravity is the same.
If you're looking for the speed of Jack as he hits the water, you just need to solve for v in the equation[tex]$v^2 = v_0^2 + 2ad$[/tex].
Here,
v is Jack's speed as he hits the water,
[tex]$v_0$[/tex] is Jack's initial speed (which is zero since he's not moving when he jumps),
a is Jack's acceleration (which is 9.91m/s²), and
d is Jack's displacement (which is the height of the bridge, which you said is 10m).
This gives you an answer of [tex]$v = \sqrt{2ad} = \sqrt{2(9.91)(10)} = 14.13 \ \mathrm{m/s}$[/tex]
To learn more about speed
https://brainly.com/question/4931057
#SPJ9
This is physics 11th grade and a homework question I don’t understand how to do this or what the question is asking me
Answers
a) Frequency is the number of complete oscillations per second. Looking at the graph, there are 9 complete oscillations in 5 seconds. Thus,
Frequency = 9/5 = 1.8 oscillations per second
Frequency = 1.8 Hz
Period = 1/frequency = 1/1.8
Period = 0.056 s
b) When we differenctiate displacement with respect to time, the result is velocity.
Recall, period = 1/f = 5/9 cycles
1/4 cycle behind = 1/4 x 5/9 = 5/36
It is delayed with 5/36 sec with respect to displacement.
5/36 sec = 0.139 sec
Acceleration = first derivative of velocity = second derivative of displacement = 1/4 cycle behind velocity = 1/2 cycle behind displacement =
5/36 = 0.139 sec delayed with respect to velocity
= 5/18 = 0.2777 secs delayed with respect to displacement
Thus, the number of seconds out of phase with the displacements is 0.278 seconds
c) The formula for calculating the period of an ideal pendulum anywhere is
T = 2π√length/local gravity). We would calculate the local gravity.
From the information given,
length = 0.2
T = P = 5/9
Thus,
5/9 = 2π√0.2/local gravity)
(5/9)/2π = √0.2/local gravity
Square both sides. It becomes
[(5/9)/2π]^2 = 0.2/local gravity
local gravity = 0.2/[(5/9)/2π]^2
local gravity = 25.56 m/s^2
Thus,
acceleration due to gravity = 25.56 m/s^2
Recall, earth's gravity = 9.8 m/s^2
number of g forces = 25.56/9.8
number of g forces = 2.61
A Porsche 914 accelerates uniformly from 0 to 60 miles perhour in 5 seconds. Assuming a frictionless air track and a glider mass of 550grams, find the mass M2 that one must hang from the glider in order to obtain an accelerationequal to that of the Porsche.
Answers
The mass M₂ that one must hang from the glider in order to obtain an acceleration equal to that of the Porsche is 0.664 kilograms.
The initial velocity U of the porche is 0miles/hours or 0m/s.
The final velocity V of the porche is 60miles/hours or 26.84 m/s.
Total time period is 5 seconds,
Using equation of motion,
V+U = at
Putting all the values,
26.84= a(5)
a = 5.364 m/s².
Now, the mass of the glider is 0.550 Kg.
Let us assume that the glider and the mass are connected by a string. The tension in the string is T.
The mass M2 is hanged from one end the glider is on the horizontal surface.
When the system is released,
Total force on glider,
(0.550)a = T
Total force on the mass M2,
M2(a) = M2g - T.
Putting the value of T,
M2a = M2g - (0.550)a
(0.550)a = M2(g-a)
M2 = (0.550)×5.364/(9.8-5.364)
M2 = 0.664 Kg.
The required mass to be hung is 0.664 Kg.
To know more about tension in string, visit,
https://brainly.com/question/24994188
#SPJ1
PLS help due today number in the picture are 15 and 0
Answers
As the horizontal component of the velocity is constant throughout the projectile, the time of the flight of the projectile is independent of the horizontal velocity, therefore the correct answer is option E .
What is a projectile motion ?It is the motion of any object or body when it is ejected off the surface of the earth and follows any curving path while being affected by the gravitational pull of the planet .
The total time of the flight of the projectile = 2uSinθ / g
Thus , the time of the flight of the projectile is independent of the horizontal velocity, therefore the correct answer is option E.
To learn more about projectile motion here, refer to the link ;
brainly.com/question/11049671
#SPJ1
Calculate the net force.
Answers
The net force acting on the box is 15 N. The force acting on a box is unbalanced because the force on one side is 7 N while the force on other side is 8 N.
What is force?Force is defined as a push or pull exerted on an object as a result of the interaction of the object with another object.
It can also be defined as a factor that can alter how an object moves.
Net force is defined as the force that is the result of all forces concurrently acting on an object.
It can also be defined as all of the forces acting on an object are added together into a vector.
Net force = F1 + F2 + F3
= 7N + 4N + 4N
= 15 N
Thus, the net force acting on the box is 15 N. The force acting on a box is unbalanced because the force on one side is 7 N while the force on other side is 8 N.
To learn more about force, refer to the link below:
https://brainly.com/question/13191643
#SPJ1
Element x is a non metal in which position of the periodic table can element x be found
Answers
Answer:
To the right
Explanation:
Metals are to the left, nonmetals are to the right. There's a border I drew that separates nonmetals and metals
what is the formula to use when measuring specific heat capacity by method of mixtures?
Answers
Answer: Cs = [m1c1(T - T1) + mcCc(T - Ts)]/Ms(Ts - T)
Explanation:
The concept of heat exchange which is expressed as
heat lost by a hot body = heat gained by a cold body
The specific heat of a solid substance as determined by the method of mixture using the heat exchange concept would be
Heat lost by substance = heat gained by liquid + heat gained by calorimeter
Thus,
MsCs(Ts - T) = m1c1(T - T1) + mcCc(T - Tc)
Dividing both sides by Ms(Ts - T)
The formula for calculating the specific heat capacity by method of mixtures is
Cs = [m1c1(T - T1) + mcCc(T - Ts)]/Ms(Ts - T)
Where
m1 = mass of liquid
c1 = specific heat of liquid
ms = mass of substance
Cs =specific heat of substance
mc = mass of calorimeter
Cc = specific heat of material used in making the calorimeter
T = Final temperature of the mixture
T1 = initial temperature of the liquid
Ts = initial temperature of the substance
A solid cylinder (mass 0.274 kg, radius 2.00 cm) rolls without slipping at a speed of 5.00 cm/s. What is its total kinetic energy?
Answers
Given data
*The given mass of the solid cylinder is m = 0.274 kg
*The given radius of the cylinder is r = 2.00 cm = 0.02 m
*The given speed is v = 5.00 cm/s = 0.05 m/s
The formula for the total kinetic energy is given as
[tex]\begin{gathered} U_T=U_k+U_R \\ U_T=\frac{1}{2}mv^2+\frac{1}{2}I\omega^2 \\ =\frac{1}{2}mv^2+\frac{1}{2}(\frac{1}{2}mr^2)(\frac{v}{r})^2 \end{gathered}[/tex]*Here U_K is the translation kinetic energy
*Here U_R is the rotational kinetic energy
*Here 'I' is the moment of inertia of the solid cylinder
Substitute the known values in the above expression as
[tex]\begin{gathered} U_T=\frac{1}{2}(0.274)(0.05)^2+\frac{1}{2}(\frac{1}{2}\times0.274\times(0.02)^2)(\frac{0.05}{0.02})^2 \\ =0.000342+0.000171 \\ =5.13\times10^{-4}\text{ J} \\ =5.13\times10^{-1}\text{ mJ} \end{gathered}[/tex]Hence, the total kinetic energy is U_T = 5.13 × 10^-1 mJ
Question 8 of 10 A scientist adds different amounts of salt to 5 bottles of water. She then measures how long it takes for the water to boil. What is the responding variable in this experiment? A. The brand of salt used B. The time it takes for the water to boil C. The kind of bottles used D. The amount of salt added to the water SUBMIT it's B
Answers
Answer:
Explanation:
A scientist adds different amounts of salt to 5 bottles of water. She then measures how long it takes for the water to boil. What is the responding variable in this experiment? A. The time it takes for the water to boil B. The amount of salt added to the water C. The kind of bottles used D. The brand of salt used
1) What is the horizontal force on block A due to block B?2) What is the net horizontal force on block B?3) What is the horizontal force on block B due to block C?
Answers
Given data:
Mass of each block;
[tex]m=12\text{ kg}[/tex]Acceleration;
[tex]a=1.2\text{ m/s}^2[/tex]The free-body diagram for A,
The free-body equation for A is given as,
[tex]F-N_1=ma\ldots(1)[/tex]The free-body diagram for B is given as,
The free-body equation for B is given as,
[tex]\begin{gathered} F_B=N_1-N_2 \\ ma=N_1-N_2\ldots(2) \end{gathered}[/tex]The free-body equation for C is given as,
The free-body equation for C is given as,
[tex]\begin{gathered} F_c=ma \\ N_2=ma\ldots(3) \end{gathered}[/tex]Equating equation (2) and (3),
[tex]\begin{gathered} N_1-N_2=N_2_{} \\ N_1=2N_2 \\ N_1=2ma \end{gathered}[/tex]Part (1),
The horizontal force on block A due to block B is given as,
[tex]\begin{gathered} F_{AB}=N_1 \\ =2ma \end{gathered}[/tex]Substituting all known values,
[tex]\begin{gathered} F_{AB}=2\times(12\text{ kg})\times(1.2\text{ m/s}^2) \\ =28.8\text{ N} \end{gathered}[/tex]Therefore, the net horizontal force on block A due to block B is 28.8 N.
Part (2)
The net horizontal force on block B is given as,
[tex]\begin{gathered} F_B=N_1-N_2 \\ =2ma-ma \\ =ma \end{gathered}[/tex]Substituting all known values,
[tex]\begin{gathered} F_B=(12\text{ kg})\times(1.2\text{ m/s}^2) \\ =14.4\text{ N} \end{gathered}[/tex]Therefore, the net horizontal force on block B is 14.4 N.
Part (3)
The horizontal force on block B due to block C is given as,
[tex]\begin{gathered} F_{BC}=N_2 \\ =ma \end{gathered}[/tex]Substituting all known values,
[tex]\begin{gathered} F_{BC}=(12\text{ kg})\times(1.2\text{ m/s}^2) \\ =14.4\text{ N} \end{gathered}[/tex]Therefore, the horizontal force on block B due to block C is 14.4 N.
Circular Motion
The Trajectory of a mass point is a helix:[tex]r(t)=\left[\begin{array}{ccc}rcos(wt)\\rsin(wt)\\ht\end{array}\right]\\[/tex]
a) Compute the velocity v(t)=r(t) and the acceleration a(t).
b) What is the angel between the velocity and the acceleration?
c) If h=0, what is the radial acceleration and the velocity of the mass point at r=2m and 40rpm
No idea how to answer this question, I have never seen anything like it.
Any help would be awesome :)
Answers
Answer and step by step explanation:
First of all, I'm assuming you have had calculus, or this is going to be very awkward. Then, I'm replacing w with the Greek letter omega, it's a pet peeve of mine, sorry.
Shockingly, the derivative of a vector is computed by taking the derivative of each component (by linearity). If you've never heard the word derivative yet, you can think of the x and y components as two harmonic motions out of phase by 90°, and the z component as having constant speed h (harmonic motion is what you see when a mass moves along a circle with constant angular velocity and you look at it from the side).
At this point, let's use the derivative method for question a:
[tex]v(t)=\dot{r}(t)=\left[\begin{array}{ccc}-\omega r\sin(\omega t)\\\omega r\ cos(\omega t)\\h\end{array}\right]; a(t)=\dot v(t)=\ddot{r}(t)=\left[\begin{array}{ccc}-\omega ^2r\cos(\omega t)\\-\omega ^2r\ sin(\omega t)\\0\end{array}\right]\\[/tex]
Point b requires computing angles, which screams dot product to me.
[tex]\vec v(t) \cdot \vec a(t) =\left[\begin{array}{ccc}-\omega r\sin(\omega t)\\\omega r\ cos(\omega t)\\h\end{array}\right]\cdot \left[\begin{array}{ccc}-\omega ^2r\cos(\omega t)\\-\omega ^2r\ sin(\omega t)\\0\end{array}\right] = + \omega^3r^2 sin (\omega t) cos (\omega t) -\omega^3r^2 cos (\omega t) sin (\omega t) = 0 = ||\vec v|| ||\vec a|| cos \theta \implies cos\theta = 0 \implies \theta=\frac \pi2[/tex]
Now, the implied part is granted by the fact that we are assuming neither the velocity nor the acceleration are both zero, so the only option is for the cosine being zero, that makes the two vector orthogonal.
Finally, for point c, let's just take the moduli of both velocity and acceleration [tex]||\vec v|| = \omega r; ||\vec a||=\omega^2 r[/tex] and let's convert the angular velocity in civiliz... err, IS units: [tex]40 rpm = 40\times \frac{2\pi}{60}rad/s = \frac 43 rad/s[/tex]
Let's replace and we get
[tex]v=\frac83= 2.6 m/s\\a= \frac{32}3 = 10.5 m/s^2[/tex]
how long must a 50 N force act on a 400 kg mass to raise its speed from 10 m/s to 12 m/s
Answers
Answer:
see below
Explanation:
F=ma
50 = 400 a
A = 50/400 = .125 m/s^2
Accel = change in v / change in t
.125 = (12-10) / t Shows t = 16 seconds
A steel railroad track has a length of 24 mwhen the temperature is 8°C.What is the increase in the length of therail on a hot day when the temperature is36 °C? The linear expansion coefficient ofsteel is 11 x 10-6(°C)-1.Answer in units of m.Answer in units of mSecond part:- Suppose the end of rail are rigidly clamped eight Celsius degrees to prevent expansion calculate the thermal stress in the rail if it’s temperature is raised to 36 Celsius degrees Young’s module for Steel is 20×10 to the power of 10 and N/m to the power of two answer in units of N/m to the power of two.
Answers
Given:
• Length = 24 m
,• Temperature, T1 = 8°C
,• Expansion coefficient = 11 x 10⁻⁶(°C)⁻¹
Let's solve for the following:
• (a). The increase in length of the rail when the temperature is 36 °C
To find the increase in length, apply the formula:
[tex]L=L_o*\alpha *(T_2-T_1)[/tex]Where:
Lo = 24 m
α = 11 x 10⁻⁶(°C)⁻¹
T2 = 36 °C
T1 = 8°C
Thus, we have:
[tex]\begin{gathered} dL=24*11\times10^{-6}*(36-8) \\ \\ dL=24*11\times10^{-6}*(28) \\ \\ dL=0.0074\text{ m} \end{gathered}[/tex]The increase in length is 0.0074 m.
• (b). Let's calculate the thermal stress.
To find the thermal stress, we have the formula:
[tex]\text{ thermal stress = }Y\frac{dL}{L}[/tex]Where:
Y is the young modulus = 20 x 10¹⁰ N/m
dL is the change in length = 0.0074 m
L is the length = 24 m
Input values in the formula and solve:
[tex]\begin{gathered} \text{ thermal stress = 20}\times10^{10}*\frac{0.0074}{24} \\ \\ \text{ thermal stress = 6.17}\times10^7\text{ N/m}^2 \end{gathered}[/tex]The thermal stress is 6.17 x 10⁷ N/m².
ANSWER:
• (a). 0.0074 m.
• (b). 6.17 x 10⁷ N/m²
A object has a mass of 4 kg and is accelerating at 3 m/s2.The net force acting on the object is [] N.
Answers
In order to calculate the net force acting on the object, we can use the second law of Newton:
[tex]\sum ^{}_{}F=m\cdot a[/tex]So, for a mass of 4 kg and an acceleration of 3 m/s², we have:
[tex]\begin{gathered} F=4\cdot3 \\ F=12\text{ N} \end{gathered}[/tex]Therefore the net force is 12 Newtons.
In the diagram, 91 = -6.39*10^-9 C andq2 = +3.22*10^-9 C. What is the electricfield at point P? Include a + or - sign tomindicate the direction.q2q1P0.424 m-** 0.636 m(Remember, E points away from + charges,and toward - charges.)(Unit = N/C)Enter
Answers
The magnitud of an electric field is given as:
[tex]E=\frac{1}{4\pi\epsilon_0}\frac{\lvert q\rvert}{r^2}[/tex]For the charge 1 the magnitude is:
[tex]\begin{gathered} E_1=\frac{1}{4\pi\epsilon_0}\frac{\lvert-6.39\times10^{-9}\rvert}{(0.424)^2} \\ E_1=319.543 \end{gathered}[/tex]Now, since charge 1 is negative this means that this field points towards the charge, in this case to the left, then the electric field for charge one is:
[tex]\vec{E_1}=-319.543[/tex]For the charge 2 the magnitude is:
[tex]\begin{gathered} E_2=\frac{1}{4\pi\epsilon_0}\frac{\lvert3.22\times10^{-9}\rvert}{(0.636)^2} \\ E_2=71.565 \end{gathered}[/tex]Now, since charge 2 is positive this means that this field points away from the charge, in this case to the left, then the electric field for charge two is:
[tex]\vec{E_2}=-71.565[/tex]Now, the total field on point P is the sum of both electric fields, then the total electri field on this point is:
[tex]E=-391.108[/tex]7.0 mm diameter copper wire carries a current of 7.0 μA. What is the current density?
Answers
The current density of a 7.0 mm diameter copper wire that carries a current of 7.0 μA is 18.19 × 10⁻³ A/m².
The quantity of electric modern-day journeying in step with the unit move-phase region is known as current density and is expressed in amperes per rectangular meter. The more present-day a conductor, the higher could be the modern-day density. current density is the quantity of electrical modern flowing in step with the unit move-sectional region of a material.
subsequently, the SI unit of current density needs to be Ampere/meter2. Ohm's law relates the current flowing via a conductor to the voltage V and resistance R; this is, V = IR. An alternative assertion of Ohm's law is I = V/R.
current I = 0.7 μA
r = 3.5mm
J = I/A = I/πr³
J = 0.7 × 10⁻⁶ / 3.14 × (3.5 × 10⁻³)²
J = 18.19 × 10⁻³ A/m²
Learn more about current density here:- https://brainly.com/question/15266434
#SPJ1
Giant electric eels can deliver a shock of 590 V with up to 1.0 A of current for a brief time. A snorkeler in salt water has a body resistance of about 770 Ω. A current of about 500 mA can cause heart fibrillation and death if it lasts too long.
A)What is the maximum power max a giant electric eel can deliver to its prey?
B)If the snorkeler is struck by the eel, what current will pass through her body?
C)Is this current large enough to be dangerous?
D)What power received does the snorkeler receive from the eel?
Answers
Answer:
Explanation:
Given:
U = 590 V
I = 1.0 A
R₁ = 770 Ω
I* = 500 mA = 0.5 A
_________________
P - ?
A)
Power:
P = U·I = 590·1.0 = 590 W
B)
Сurrent:
I₁ = U / R ₁ = 590 / 770 = 0.770 A = 770 mA
C)
This current is life-threatening!!!
I₁ > I* (700 mA > 500 mA)
D)
Energy received:
E = I₁²·R₁ = 0.770²· 770 ≈ 460 W
Hi Can you help out with this physics question? We may learn a new thing
Answers
Features that must be present for a stable well-designed racing car.
For, a racing car the speed is high and also to finish the race, the car should be easy to turn around.
Lower the centre of gravity more will be its stability.
A low centre of gravity is a must for a stable well-designed racing car.
Inside the nucleus, two protons are held together by a force which overcomes the repulsion. This force is called
Answers
Inside the nucleus, two protons are held together by a strong nuclear force which overcomes the repulsion. This is sometimes referred to as strong interaction.
What is strong nuclear force?The strong nuclear force or the strong interaction is strong enough to overcome the repulsive force between the two positively charged protons and thereby allowing protons and neutrons to stick together even in a small space. Protons are held together by the strong attractive nuclear force that binds together protons and neutrons.
The strong force is one of the four fundamental forces of nature that include gravity, electromagnetism, and the weak nuclear force. The strong force holds protons and neutrons within the nucleus of the atom and thus creating densest environments in nature.
The strong force dies off very fast with distance more than gravity or the electromagnetic force. It's difficult to detect the strong force outside of a nucleus.
To know more about strong nuclear force, refer
https://brainly.com/question/8695581
#SPJ13