I AM GIVING A LOT OF POINTS SO PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



Can someone please help me with this?
Rules:

Label the section of the roller coaster where the kinetic or potential energy is.

Answer:

Explanation:

no of moles=given mass/molar mass

no of moles=150 g/207.19

no of moles=0.72

We will use dimensional analysis to answer this question.

[tex]150 g * \frac{1 g}{207.19 mol} = 0.724 mol[/tex]

The answer is 0.724 mol.

Answer:

The leftover is 15 g of oxygen rather than liquid hexane as the fuel limits the reaction.

Explanation:

Hello!

In this case, since the described combustion reaction is:

[tex]C_6H_{14}(l)+\frac{19}{2} O_2(g)\rightarrow 6CO_2(g)+7H_2O(g)[/tex]

Thus, since 5.2 g of hexane (86.2 g/mol) is reacted with 33.0 g of oxygen (32.0 g/mol) we can compute the mass of hexane that was actually consumed via stoichiometry with oxygen (1:19/2 mole ratio):

[tex]m_{C_6H_{14}}^{consumed \ by\ O_2}=33.0gO_2*\frac{1molO_2}{32.0gO_2}*\frac{1molC_6H_{14}}{\frac{19}{2}gO_2 } *\frac{86.2gC_6H_{14}}{1molC_6H_{14}} \\\\m_{C_6H_{14}}^{consumed \ by\ O_2}=9.36gC_6H_{14}[/tex]

It is proved then than the hexane won't have any leftover but oxygen does, as shown below:

[tex]m_{O_2}^{consumed \ by\ C_6H_{14}}=5.2gC_6H_{14}*\frac{1molC_6H_{14}}{86.2gC_6H_{14}} *\frac{\frac{19}{2}molO_2 }{1molC_6H_{14}} *\frac{32.0gO_2}{1molO_2} \\\\m_{O_2}^{consumed \ by\ C_6H_{14}}=18g[/tex]

It means the leftover of oxygen is:

[tex]m_{O_2}^{leftover}=33g-18g\\\\m_{O_2}^{leftover}=15g[/tex]

Regards!

Answer:

An ionic bond forms when atoms transfer electrons.

Explanation:

Ionic bonds are formed when atoms transfer electrons. (In contrast, covalent bonds are formed when atoms share electrons.)

There's a distinction between the two: when two atoms react to form an ionic bond, one atom would completely lose one electron, while the other would completely gain that electron. The atom that loses the electron becomes a positively-charged ion called a cation, whereas the atom that gains the electron becomes a negatively-charged ion called an anion.

For example, consider the reaction between a sodium [tex]\rm Na[/tex] atom and a chlorine [tex]\rm Cl[/tex] atom: [tex]\rm Na + Cl \to NaCl[/tex].

When the sodium atom and the chlorine atom encounter, the sodium atom would lose one electron to form a positively-charged sodium ion, [tex]\rm Na^{+}[/tex]. The chlorine atom would gain that electron to form a negatively-charged chlorine ion [tex]\rm Cl^{-}[/tex].

These two ions will readily attract each other because of the opposite electrostatic charges on them. This electrostatic attraction (between two ions of opposite charges) is an ionic bond.

Overall, it would appear as if the sodium [tex]\rm Na[/tex] atom transferred an electron to the chlorine [tex]\rm Cl[/tex] atom to form an ionic bond.

In contrast, when two atoms react to form a covalent bond, they share electrons without giving any away completely. Therefore, it is possible to break certain covalent bonds apart (using a beam of laser, for example) and obtain neutral atoms.

On the other hand, when an ionic bond was broken, the result would be two charged ions- not necessarily two neutral atoms. The electron transfer could not be reversed by simply breaking the bond.

For example, when table salt [tex]\rm NaCl[/tex] is melted (at a very high temperature,) the ionic bond between the sodium ions and chloride ions would (mostly) be broken. However, doing so would only generate a mixture of [tex]\rm Na^{+}[/tex] and [tex]\rm Cl^{-}[/tex] ions- not sodium and chlorine atoms.

Answer:yea it’s transfer

Explanation:

Answer:

Iron is natural. Paper is man-made

Explanation:

Answer:

iron

Explanation:

Answer:

32°c

Explanation:

Because in F it would be 0°f

Answer:

747mL of the 0.157mL are needed

Explanation:

To find the grams of salt we need to convert these grams to moles using molar mass of magnesium nitrate (148.3g/mol). Then, with the molar concentration we can convert the moles to liters and, as last, to milliliters, as follows:

Moles Mg(NO₃)₂:

17.4g * (1mol / 148.3g) = 0.117 moles of magnesium nitrate

Volume:

0.117 moles * (1L / 0.157moles) = 0.747L

= 747mL of the 0.157mL are needed

In a 0.157M solution there are 0.157 moles per liter of solution

Electromagnetic energy

Explanation:

Growth is one of the characteristics of living things. It refers to the increase of an organism. A leaf is part of a plant, which is a photosynthetic organism i.e. an organism capable of producing its own food using energy from sunlight. Light energy is a part of the ELECTROMAGNETIC ENERGY.

This light energy is used to synthesize glucose (food) via photosynthesis. The glucose, which stores chemical energy in its bond is then broken down to yield ATP used for growth. Hence, the transformation of electromagnetic energy to light energy is how a leaf grow.

Answer:

[tex]55.2gH_2O[/tex]

Explanation:

Hello!

In this case, since the reaction between hydrogen and oxygen to produce water is:

[tex]2H_2+O_2\rightarrow 2H_2O[/tex]

When equal masses of each reactant go in contact to carry out the reaction, we can identify the maximum mass of yielded water as the fewest mass yielded by each reactant, just as shown below:

[tex]m_{water}^{by\ H_2}=49.0gH_2*\frac{1molH_2}{2.02gH_2}*\frac{2molH_2O}{2molH_2}*\frac{18.02gH_2O}{1molH_2O} =170gH_2O\\\\m_{water}^{by\ O_2}=49.0gO_2*\frac{1molO_2}{32.0gO_2}*\frac{2molH_2O}{1molO_2}*\frac{18.02gH_2O}{1molH_2O} =55.2gH_2O[/tex]

Thus, since hydrogen yields more water than real, we limit the maximum mass of water to those 55.2 g yielded by oxygen as hydrogen would be in excess.

Best regards!

pH of buffer solution : 4.32

A buffer solution is a solution that can maintain a good pH value due to the addition of a little acid or a little base or dilution.

The buffer solution can be acidic or basic

Acid buffer solutions consist of weak acids(H₂CO₃) and their salts.(NaHCO₃)

mol H₂CO₃

[tex]\tt 0.032\times 0.25=0.008[/tex]

mol NaHCO₃

[tex]\tt 0.02\times 0.15=0.003[/tex]

[tex]\tt [H^+]=Ka\dfrac{mole~weak~acid}{mole~salt}\\\\(H^+]=1.8\times 10^{-5}\dfrac{0.008}{0.003}=4.8\times 10^{-5}\\\\pH=5-log~4.8=4.32[/tex]

Answer:

76.4oC or 169.52oF

Explanation:

That's the amount of heat needed

The heat capacity is the heat amount lost or gained by the object in a thermodynamic system. The heat needed to raise the temperature of the water is 1117.7 Joules.

Heat capacity (q) is the heat an object loses or gains to alter the temperature of the thermodynamic system by a difference of a degree Celsius. The heat capacity is given by the mass, specific heat capacity, and temperature change.

Given,

Mass of water (m) = 3.50 gm

Specific heat (c) = 4.18 J/ g°C

The temperature change (∆T) = T₂ - T₁

= 98.8 °C - 22.4 °C

= 76.4 °C

The heat capacity is given as,

q = mc∆T

Substituting values above:

q = 3.50 gm × 4.18 J/ g °C × 76.4 °C

q = 1117.7 J

Therefore, 3.50 g of water has a heat capacity of 1117.7 Joules.

Learn more about heat capacity here:

https://brainly.com/question/19569570

#SPJ2

Answer:

A river and its tributaries make up a watershed (aka river system or drainage basin)

Pls mark me as brainliest

Answer:

river system

Explanation:

a river and all its tributaries make up a river system

We are given:

P1 = 1 atm                 P2 = 3 atm

T1 = 300 K               T2 = 600 K

V1 = 6 L                    V2 = v L

Finding the final Volume:

From the ideal gas equation:

PV = nRT

since in the given scenario, the universal gas constant (R) and number of moles(n) are constant

So, for both the cases, the value of n*R will be a constant k

Hence, we can write that:

PV / T = k        [where k is a constant]

Since the constant 'k' is the same for both the cases, we can write that:

P1V1 / T1 = P2V2 / T2

replacing the variables

1 * 6 / 300 = 3 * v / 600

1/50 = v / 200

v = 200/50

v = 4 L

Therefore, the volume of the gas at 600K and 3 atm will have a volume of 4 L

The procedure that Dr. Simmons will not include as part of her scientific experiment is uncontrolled variables.

When a scientific investigation is carried out, experiments are used as a method of verifying results. Generally, when an experiment is carried out, you want to verify that given circumstances generate a specific result.

The experiments must be as controlled as possible so that they can be repeated and thus create reliable laws. Therefore, Dr. Simmons will not include uncontrolled variables in her experiment, because these variables can modify the result of an investigation in many ways and limit the production of new knowledge.

Uncontrolled variables are generally not included in scientific investigations because they cannot be modified and they influence various results that cannot be considered reliable knowledge.

Learn more in: https://brainly.com/question/3109450

Answer:

Changes in Properties Changes in properties result when new substances form. For instance, gas production, formation of a precipitate, and a color change are all possible evidence that a chemical reaction has taken place. ... Change in Color A color change can signal that a new substance has formed.

Explanation:

The chemical reaction indicate the formation of new substance by change in nature of original compound and shows chemical changes in the reaction.

Chemical reaction is defined as  process in which two or more molecules collide with the proper orientation and enough force to produce a new product.

It is also defined as a procedure in which one or more compounds, known as reactants, are changed into one or more distinct substances, known as products.

There are mainly seven types of reaction.

Thus, the chemical reaction indicate the formation of new substance by change in nature of original compound and shows chemical changes in the reaction.

To learn more about chemical reaction, refer to the link below:

https://brainly.com/question/3461108

#SPJ5

Answer:

it is C

Explanation:

because Potassium iodide (KI) is an ionic compound which is made of the following ions: K+I−

Answer:

true

Explanation:

Answer:

carbon-13

Explanation:

Answer:

0.548 moles of HBr are required

Explanation:

Given data:

Number of moles of  hydrobromic acid = ?

Moles of bromine formed = 0.274 mol

Solution:

Chemical equation:

2HBr     →   H₂  + Br₂

Now we will compare the moles of HBr with Br₂.

               Br₂           :           HBr

               1               :            2

               0.274       :           2×0.274=0.548

Thus, 0.548 moles of HBr are required.

Answer:

0.805 M.

Explanation:

Hello!

In this case, since the molarity of a solution is computing by dividing the moles of solute over the volume of solution in liters (M=n/V), for 15.0 g of potassium chloride (74.55 g/mol) we compute the corresponding moles:

[tex]n=15.0gKCl*\frac{1molKCl}{74.55gKCl}=0.201molKCl[/tex]

Next, since the volume is 0.2500 in liters, the molarity turns out:

[tex]M=\frac{0.201mol}{0.2500L} \\\\M=0.805M[/tex]

Best regards!

Answer: d

Explanation:

On edg

Answer:

there is your answer hope it helped :3

Answer:

A is probably ur answer

Explanation:

but if I'm wrong My bad and at least I tried

Answer:

It emits 1.64 x 10⁻¹⁸J of energy

Explanation:

The n = 1 is a lower quantum level compared to n = 2.

When a hydrogen atom moves from a higher level to a lower one, it simply emits the energy difference between the two levels.

Answer:

4

Explanation:

[tex]\int\limits^a_b {x} \, dwetjernjtnx[/tex]