I a type of repiratory hazard which uually conit of gaeou material and particulate and reult from operation uch a paint praying

Equilibrium concentrations of reactant and products

CH2Cl2=0.043

CH4=0.136

CCl4=0.136

When both the reactants and products are at concentrations that do not change over time, they are said to be in chemical equilibrium. In this state, the forward reaction rate is equal to the reverse reaction rate.

Explanation:

2CH2Cl2(g) =CH4(g) + CCl4(g)

Initial    0.315mol/L       0                   0

Change    -2x              +x                +x

Equib         0.315-2x     x,               x

Kc = [CH4][CCl4] / [CH2C2] (^2)

10.5 = x(^2) / (0.315 - 2x)^2

Work out the quadratic for x

10.5(4x^2 +0.099225 -1.26x) =x^2

3.90476x^2 -1.26x +0.099225=0

solve for x

discard the negative, can't have less than nothing.

x=0.136

0.315-2x   = 0.315-2*0.136=0.043

Learn more about equilibrium concentrations here:

https://brainly.com/question/13414142

#SPJ4

Marissa is investigating a biochemical reaction involving carbon compounds. the reaction requires a specific enzyme. The role of the enzyme in this reaction is to speed up the chemical reaction.

Enzymes are protein molecules. Enzymes lower the activation energy necessary for the reaction to occur. This allows the reaction to happen more quickly than it would without an enzyme present.

Any reaction requires a specific enzyme. That specific enzyme allow the

reaction to speed up, otherwise there is no change in reaction speed.

Enzymes work by decreasing the activation energy required to start biochemical reactions.

So, the enzyme role of enzyme is to speed up the reaction ad decreasing the activation energy of the reaction.

To learn more about Role of enzymes, Here :

https://brainly.com/question/15806512?referrer=searchResults

#SPJ4

Answer: The atomic mass of an element is not a whole number because it is based on the abundance of each isotope for that element.

Explanation: The atomic mass of an element is not a whole number because it is based on the abundance of each isotope for that element. The atomic mass of an element is a weighted average of the atomic masses of all of its naturally occurring isotopes, taking into account the relative abundance of each isotope. For example, if an element has two isotopes, one with an atomic mass of 10 and the other with an atomic mass of 12, and the isotope with an atomic mass of 12 is more abundant, the atomic mass of the element will be closer to 12 than to 10. This means that the atomic mass of an element is usually not a whole number because it is an average of several different atomic masses.

The pressure in the plastic bag is equal to the initial pressure of the gas in the aerosol can, which is 5.20 atm.

Aerosol is a type of suspension of fine particles or liquid droplets in air or another gas. Aerosols are typically created when a material is dispensed from a pressurized container and dispersed in the form of a spray, mist, foam, or foam. Examples of aerosols include dust, smoke, smog, fog, and spray paint. Aerosols can also be generated naturally, such as the spraying of saltwater droplets from the ocean’s surface. Aerosols are important for many scientific and industrial applications, such as in medicine, agriculture, and manufacturing. They are also essential in the production of consumer products such as cosmetics, paints, and cleaners. Aerosols also play a key role in the global climate system, as they affect the amount of sunlight that reaches the Earth’s surface and the formation of clouds. Aerosols are also used in research and environmental monitoring, as they can provide information about air quality and climate change.

This is because, as the gas is sprayed out of the can into the plastic bag, it expands and its pressure decreases. However, the pressure of the gas in the plastic bag will stay the same as the pressure of the gas in the aerosol can, so long as the temperature of the gas stays constant. This is because, according to the ideal gas law, the pressure of a gas is directly proportional to its temperature. Therefore, the pressure of the gas in the plastic bag will be 5.20 atm.

To learn more about aerosol
https://brainly.com/question/28853452
#SPJ4

Answer: 24.41 The molar heat of combustion of gaseous cyclopro- pane is -2089 kJ/mol; that for gaseous cyclopentane is -3317 kJ/mol. Calculate the heat of combustion per CH2 group in the two cases, and account for the difference.

Explanation:

I used the simulation to model the changes by adjusting the Temperature slider at the bottom. As I increased the temperature, the equilibrium shifted towards the products side.

The temperature is a measure of how hot or cold something is. It is measured using a thermometer and can be expressed in Celsius, Fahrenheit, or Kelvin. Temperature can be affected by many factors, including air pressure, humidity, wind, and the time of day.

I also observed the pie graph to see how the system changed. As the temperature increased, the number of molecules for both nitrogen and hydrogen decreased, while the number of molecules for ammonia increased. I also used the pause button on the simulation to observe the number of particles at any point of time. This allowed me to see how the reaction was progressing and how the equilibrium shifted as the temperature increased.

To learn more about temperature

https://brainly.com/question/2339046

#SPJ1

The answer is True.

--In cis-1,2-dimethylcyclohexane, one methyl group is axial and one methyl group is equatorial in both ring flip conformers, so neither conformer is more stable than the other.

What is Isomer?

--In chemistry, isomers are molecules or polyatomic ions with identical molecular formulae – that is, same number of atoms of each element – but distinct arrangements of atoms in space.

--Isomerism is existence or possibility of isomers. Isomers do not necessarily share similar chemical or physical properties

-- Conformational isomerism is a form of stereoisomerism in which the isomers can be interconverted just by rotations about formally single bonds.

Stereochemistry

Stereochemistry is an isomerism formation whereby the molecules have similar formulation of the molecules and bonded atoms sequence,

Please click the below link to learn more about the above question:

https://brainly.com/question/29824552

#SPJ4

Answer:

Wegener's theory was primarily rejected since he offered no explanation for how the continents might move.

Explanation:

The theory also went against many ideas widely accepted in the community.

All other options given apply to exothermic reaction.

Since it is an endothermic reaction, More bond energy is absorbed on the reactants side than is released on the products side.

A chemical reaction is the process of chemical transformation of one group of chemicals into another group.

Classical chemical reactions involve changes that affect only the position of electrons in forming and breaking chemical bonds between atoms, with no changes in the nucleus (no changes in the elements present) and many If , it can be described by a chemical equation. Nuclear chemistry is a subfield of chemistry that deals with chemical reactions of unstable radioactive elements in which both electronic and nuclear changes can occur.

Learn more about reaction here : https://brainly.com/question/6506846

#SPJ4

When 1.9 mol of copper (ii) hydroxide decomposes to form copper (ii) oxide and water, moles of water that formed are 1. 9 moles

The moles that formed can be calculated as follows:

first we should write the balanced reaction

Cu(OH)₂ → CuO + H₂O

The following numbers of moles of each component are involved in the reaction according to reaction stoichiometry, which describes the relationship between the amounts of reagents and products in a chemical reaction, with unitary method we can calculate the moles of H₂O:

Cu(OH)₂: 1 mole

CuO: 1 mole

H₂O: 1 mole

so, 1 mole of Cu(OH)₂ produce 1 mole of H₂O

If 1.9 mol of copper (ii) hydroxide decomposes to form copper (ii) oxide and water so the moles of H₂O is

Moles H₂O = 1/1 x mole of Cu(OH)₂ = 1/1 x 1.9 mol = 1.9 moles

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ4

(a) 57.9 mol moles of carbon dioxide are produced when 19.3 mol of propane gas is burned in excess oxygen.

The combustion reaction can be defined as the complete oxidation of any hydrocarbon; such reactions typically produce just carbon dioxide and water as byproducts.

The following is a representation of the propane combustion reaction, given the specified conditions:

    C₃H₈ + 5O₂  →   3CO₂ + 4H₂O

19.3 mol of propane is available for combustion.

Three moles of CO₂ were produced for every 1 mole of propane that was burned.

19.3 moles of propane will result in

    3 × 19.3 = 57.9 mol

Thus, burning 19.3 moles of propane gas in extra oxygen produces 57.9 moles of CO₂.

The complete question is attached.

You can also learn about combustion reaction from the following question:

https://brainly.com/question/12172040

#SPJ4

The grams of PbBr₂ formed when excess solution is added to 76.0 ml of 0.625 m solution of Pb(NO₃)₂ are 17.4325.

The balanced chemical equation for the process is,

Pb(NO₃)₂(aq) + BaBr₂(aq) → PbBr₂(s) + Ba(NO₃)₂(aq)

So, from the reaction, we can see that when one mole of Pb(NO₃)₂ reacts, one mole of PbBr₂ precipitate is formed.

It is given that 76ml of 0.625 M Pb(NO₃)₂ is reacting,

We know,

Moles = Molarity x volume (in liters)

Now, putting the value to find the moles of Pb(NO₃)₂ soluton,

Moles of Pb(NO₃)₂  = 76 x 0.625/1000

Moles of Pb(NO₃)₂  = 0.0475 moles.

So, the mole of the precipitate formed is 0.0475 Moles.

Now, we also know,

Moles = Formed mass/Molar mass.

Molar mass of PbBr₂ = 367 g/mol.

Moles of PbBr₂ = 0.0475 moles.

Formed mass of PbBr₂ = 367 x 0.0475

Formed mass of  PbBr₂ = 17.4325 Grams.

So,  17.4325 Grams of PbBr₂ is formed.

To know more about Moles, visit,

https://brainly.com/question/15356425

#SPJ4

This amount of solute would be provided by 2.5 grams of a 10.0% solution.

% (w/v) formula:

[tex]% (\frac{w}{v}) = \frac{grams solute}{mL of solution} *100[/tex][tex](\frac{w}{v})[/tex]%[tex]= \frac{grams solute}{mLof solution} *100[/tex]

[tex]10[/tex]% [tex]NACl(\frac{g}{mL})= \frac{grams NaCl}{25mL} *100[/tex]

To calculate the mass in grams of NaCl required to create a 10% (w/v) NaCl solution, divide 10% by 100 and multiply the result by 25.

[tex]0.1*25 = 2.5g[/tex]

Salt, commonly known as sodium chloride (NaCl), is a substance that our body needs in order to absorb and transport nutrients, regulate blood pressure, maintain fluid balance, convey nerve messages, and contract and relax muscles.

Salt, or sodium chloride, accounts for about 75 to 90 percent of the sodium we consume. Our bodies require sodium, an essential mineral found in salt, for processes including blood pressure regulation and nutrition absorption. In addition to using salt to season food, clean household goods, and treat some medical conditions. Greater health issues like high blood pressure, heart disease, and kidney disease can be brought on by consuming too much salt. Your chance of developing those illnesses can be decreased by consuming less salt and consuming more potassium.

To learn more about solute, refer:-

https://brainly.com/question/15757469

#SPJ4

Considering the definition of complete combustion, the chemical equation for the complete combustion of C₇H₁₆ is:

C₇H₁₆(l) + 11 O₂(g) → 7 CO₂(g) + 8 H₂O(g)

Combustion is a chemical process through which heat is obtained. To achieve this, oxidation reactions are generated that allow the objective to be reached. It is necessary to have several elements:

Complete combustions are those reactions in which the combustible material is completely oxidized (consumed) and other oxygenated compounds are produced, such as carbon dioxide (CO₂) or sulfur dioxide (SO₂), as the case may be, and water (H₂O).

In other words, complete combustion is the result of the complete oxidation of the fuel but not the disappearance of the oxidizer, that is, the oxidation of all the fuel occurs. For this it is necessary that the necessary quantities of oxidizer and dry air intervene. All complete combustion releases, as a product of the reaction, carbon dioxide (CO₂) and water in the vapor state (H₂O).

Considering the definition of complete combustion, you get:

C₇H₁₆(l) + 11 O₂(g) → 7 CO₂(g) + 8 H₂O(g)

Learn more about complete combustion:

brainly.com/question/25485610

brainly.com/question/5015390

#SPJ1

Given that kb for ch3ch2nh2 is 6.3 × [tex]10^{-4}[/tex] at 25 °c, 1.58 x [tex]10^{-11}[/tex]  is the value of ka for ch3ch2nh3 at 25 °c.  

We can use the water auto-ionization constant,

which is written as Kw = Ka* Kb,

where Kw = 1.0 x[tex]10^{-14}[/tex] and ka and kb are the acid and base constants, respectively.

Another thing to keep in mind is that CH3CH2NH3+ and CH3CH2NH2 are an acid/conjugate base pair, so the above equation can be used.

Given the value for Kb, we must substitute it in and solve for Ka.

Ka = Kw/Kb  

= 1.0 x [tex]10^{-14}[/tex] /6.3 x[tex]10^{-4}[/tex]

= 1.58 x[tex]10^{-11}[/tex]

Thus ,the value of ka for ch3ch2nh3 at 25 °c is  1.58 x[tex]10^{-11}[/tex]

For such more questions on Ionisation :

brainly.com/question/27356170

#SPJ4

Atoms with a strong attraction for electrons they share with another atom exhibit a strong covalent bond. This is true.

In a covalent bond, atoms share electrons in order to achieve a stable, lower-energy configuration. The strength of the covalent bond depends on the electronegativity of the atoms involved and the distance between them. Atoms with high electronegativities, such as oxygen and fluorine, tend to have a strong attraction for the electrons they share with another atom, resulting in a strong covalent bond.

In general, covalent bonds are relatively strong compared to other types of chemical bonds, such as ionic bonds or hydrogen bonds. They are also generally more directional, meaning that they are more directional and tend to be more directional in nature, which gives rise to the formation of specific geometries in molecules.

To know more about atoms visit :

https://brainly.com/question/1641336?referrer=searchResults

#SPJ4

Atoms with a strong attraction for electrons they share with another atom exhibit a strong covalent bond. This is true.

In a covalent bond, atoms share electrons in order to achieve a stable, lower-energy configuration. The strength of the covalent bond depends on the electronegativity of the atoms involved and the distance between them. Atoms with high electronegativities, such as oxygen and fluorine, tend to have a strong attraction for the electrons they share with another atom, resulting in a strong covalent bond.

In general, covalent bonds are relatively strong compared to other types of chemical bonds, such as ionic bonds or hydrogen bonds. They are also generally more directional, meaning that they are more directional and tend to be more directional in nature, which gives rise to the formation of specific geometries in molecules.

To know more about atoms visit :

https://brainly.com/question/27950782?referrer=searchResults

#SPJ4

The bond between adjacent amino acids is a covalent peptide bond. A protein is made up of a lengthy chain of amino acids that are connected by peptide bonds.

A water molecule is removed during a biological process that links the carboxyl group of one amino acid to the amino .Peptide bonds are the connected that hold the amino acids of a peptide together in a particular order. Two atoms share an electron pair equally in a covalent link. Peptide (amide) and disulfide links between amino acids, as well as C-C, C-O, and C-N bonds within amino acids, are examples of significant covalent bonds.

To learn more about peptide bond, click here.

https://brainly.com/question/28295128

#SPJ4

The molecular dipole moments of the substituents, which are used to quantify their effect on electron donating or withdrawing, may be associated with the deactivation of the aromatic ring toward electrophilic substitution.

A substituted ring with an activating group undergoes the EAS reaction more quickly than benzene. A substituted ring with a deactivated group, on the other hand, moves more slowly than benzene. By using resonance or inductive electron donation, activating groups accelerate the EAS reaction. The reaction rate with regard to benzene is increased or decreased by the group(s) linked to the aromatic ring. the new substituent's entrance position. Activating and deactivating groups, respectively, affect the rate of the electrophilic aromatic substitution process with regard to benzene..

To know more about aromatic ring please click on the link brainly.com/question/14651665

#SPJ4

The half-life of iodine-123 is 13.3 hours: Option B: 3.13 mg of a 25.0 mg sample will remain after 39.9 hours.

Initial figure at a constant pace K. equivalent to two lawns over the half-life. One of the two over the half-life would be this. 13.3 hours is iodine 123. This would give us.05 hours to the negative one. then take K. T. out. So much homosexual is equivalent to the original dosage, which is 225 mg. Make a note of 25 mg, -15 hours, and 2 -1 39.9 hours. Therefore, using this would require using a lot of 25 3.22 -9.9 2.08 3 22 for more or less two months. A launch at 1.14. is the same as 1.14. You receive 3.13. It would be measured in milligrams. Thus, 3.13 mg would still be in my system after 39.9 hours.

To learn more about the half-life of iodine Please click on the given link:

https://brainly.com/question/25222687

#SPJ4

The energy is required to take a 15.0-g sample of ice at −15.0 °c to liquid water at 45.0 °c is 8.30kj.

The term enthalpy is defined as the sum of the system's internal energy and the product of its pressure and volume.  

Ice warming Cs = 2.09 J/g∙°C

Enthalpy of fusion ∆H = 6.02 kJ/mol

Liquid water warming Cs = 4.18 J/g∙°C

Enthalpy of vaporization ∆H = 40.7 kJ/mol

Steam Warming Cs = 2.01 J/g∙°C

Step 1: Warm ice from −15.0°C to 0°C.

q1 = 470.25 joule

Step 2: Melt ice.

q2 = 5016.66

Step 3: Warm liquid water from 0°C to 45.0°C.

q3 = 2821.5 joule

The total energy is the sum of the energy of each step.

q = q1 + q2 + q3

= 470.25 + 5016.66 + 2821.5

= 8.30kj

Thus, energy is required to take a 15.0-g sample of ice at −15.0 °c to liquid water at 45.0 °c is 8.30kj.

To learn more about the enthalpy, follow the link;

https://brainly.com/question/3393755

#SPJ2

The rate constant for H2SO4 is 1.02 x 10-2 and the rate constant for Na2C2O4 is 5.3 X 10-5.

Ka2  is the second rate dissociation constant.

Kb2 is the second base dissociation constant.

H2SO4 is a di-basic acid. Whose Step wise dissociation is given below :

H2SO4 = H++ HSO4- ---(1)

Where the rate constant is ka1 .

Now Again HSO4-  will dissociates in the following way :

HSO4- = H+ + SO42- -----(2)

Where the rate constant is Ka2 .

So , the equation for Ka2 is :

Ka2=[H+][SO42-]/[HSO4-]

The rate constant is 1.02 x 10-2.

Similarly step-wise dissociation of Disodium oxalate (Na2C2O4)  is

Na2C2O4 = NaC2O4- + Na+ -----(1)

Second dissociation equation is

NaC2O4- = C2O42- + Na+ ----(2)

So , the rate constant for the second equation is:

Ka2=[Na+][C2O42-]/[NaC2O4-]

The rate constant is  5.3 X 10-5.

To learn more about rate constant check the link below:

https://brainly.com/question/8813467

#SPJ4

[tex]H_{b} < H_{c} < H_{a} < H_{d}[/tex]  is the increasing order of acidity in given compound.

where  [tex]H_{b}[/tex] is least acidic and  [tex]H_{d}[/tex] is most acidic

Higher the stabilization of negative charge produced as a result of removal of proton higher the acidity.  [tex]H_{d}[/tex]  is most acidic because after removal of  [tex]H_{d}[/tex] ,negative charge on oxygen is resonance stabilized by (c=o) group .

similarly after   [tex]H_{d}[/tex]  , [tex]H_{a}[/tex]  is most acidic because negative charge on oxygen is stabilized by conjugation with benzene.

After  [tex]H_{a}[/tex]  , [tex]H_{c}[/tex]  is more acidic than [tex]H_{b}[/tex]  because negative charge on oxygen  is more stabilized while negative charge is less stabilized in carbon.

So to decide the order the stabilization of negative charge produced as a result of removal of proton is checked.

To know more about Acidity click below:

https://brainly.com/question/11543614#

#SPJ4

complete question:

rank the labeled protons (ha-hd) in order of increasing acidity, starting with the least acidic for  below figure.

0.3 M is the  molarity of the solution in which the mass of the plant pieces would not change .

The moles of a solute per litres of a solution known as molarity. The molar concentration in a solution is another term for molarity. Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in litres, is the most widely used unit to express solution concentration: litres of solution/moles of solute equals M.

One litre of a solutions with a 1.00 molar concentration (1.00 M) contains 1.00 moles of solute. Molarity is measured in mol/L. The molarity, which is given as moles/liter, is the quantity of moles of solute per litre of the solution. Measures of the concentration of a mixture of chemicals include molarity and molality. The main distinction between the two is based on mass.

For such more questions on Molarity :

brainly.com/question/8732513

#SPJ4

Nothing would happen if the solutions were switch so that the first incubation was in the pH 8 solution and he second one was in the pH 4 solution.

The H+ gradient would be in the wrong direction, ATP synthase would not work.

pH is a measure of how acidic/basic water is. The range goes from 0 to 14, with 7 being neutral. pHs of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base. pH is really a measure of the relative amount of free hydrogen and hydroxyl ions in the water.

pH is an important quantity that reflects the chemical conditions of a solution. The pH can control the availability of nutrients, biological functions, microbial activity, and the behavior of chemicals.

Learn more about pH here:- https://brainly.com/question/172153

#SPJ4

The safest and most accurate way to measure the temperature of the saltwater solution in a beaker is to use a thermometer with a protective sheath.

This type of thermometer is designed to protect the user from potential burns or injury and is also more accurate than other thermometers. The sheath should be made of a material that is heat resistant, such as stainless steel.

The thermometer should also be inserted into the solution as far as possible without touching the sides of the beaker. The thermometer should be left in the solution for a few minutes to allow it to reach equilibrium with the temperature of the solution before reading it.

Finally, the thermometer should be wiped off with a clean cloth before taking the reading. This will ensure the accuracy of the reading and reduce the risk of contamination.

For more questions like Thermometer reading click the link below:

https://brainly.com/question/2275528

#SPJ4

False. It is more crucial to arrange the components of a scientific process in a manner that is understandable to you than it is to list them in sequentially when modeling it.

The engineers can now do their tasks continuously instead of sequentially as they did in the past. pertaining to or founded on a procedure for testing a statistics hypothesis that requires looking at a series of samples before deciding whether to approve or reject the theory or to keep sampling from each one. sequentially.

Sequential tasks involve steps in a together that and follow a sequential order or sequence. Writing a message, creating a recognisable image, and piecing together a puzzle are a few examples of these activities.

To know more about sequentially visit:

https://brainly.com/question/29039103

#SPJ4

Answer:

a) Ca+ H2O = Ca(OH)2 + H2

5.87 g of nickel (Ni), is deposited when 0.2 faraday of electrical charge is transmitted through a solution of NiS[tex]O_{4}[/tex].

The balanced Equation of nickel is :

Ni²⁺ + 2e —> Ni

The Molar mass of nickel is 59 g[tex]mol^{-1}[/tex]

The Molar mass of Ni= 1×59=59 g[tex]mol^{-1}[/tex]

Number of faraday =2                                      (∵ Nickel losses 2 electrons )

To Determine the mass of Ni deposited.

2 faraday deposits 59 g[tex]mol^{-1}[/tex] of nickel.

To get 0.2 farad deposits what mass of nickel , we have,

2 farad = 59  g[tex]mol^{-1}[/tex] of nickel

0.2 farad = ?

⇒[tex]\frac{(59 gmol^{-1} )(0.2 )}{2}[/tex]

⇒5.87  g[tex]mol^{-1}[/tex] ≈ 5.9 g [tex]mol^{-1}[/tex]

Electroplating is essentially the hydrolysis-based plating of one metal onto another, either to stop corrosion of the metal or for ornamental purposes. In order to create a slim coherent metal coating on the electrode, the technique reduces dissolved metal cations using an electric current. When anions are electrically oxidized on a solid substrate, such as when silver chloride is formed on silver wire to create silver chloride electrodes, electroplating is frequently used.

To know more about Electroplating refer here

https://brainly.com/question/20112817#

#SPJ4

The mass of 560 cm³ (at STP) of an unknown gas is 1.60 g. This gas is sulfur dioxide (64 g/mol)

The STP condition in an ideal gas is the standard state of the gas. The STP state is defined as the state of standard pressure and temperature. The standard pressure at STP is 22400 cm³ for every 1 mol.

→ 560 gases will have 1/22400 x 560 = 0.025 moles.

Mass = 1.60 g

So:

Number of mols = Mass/Molar Mass

Molar mass = Mass/mols

Molar mass = 1.60 g/0.025 mol

Molar mass = 64 g/mol
So, this gas will be sulfur dioxide.

Learn more about Molar mass from unknown gas at https://brainly.com/question/18128652

#SPJ4

In industrial, sodium hydroxide is a well-liked strong base. In order to make sodium salts and detergents, regulate pH levels, and synthesise organic compounds, sodium hydroxide is employed.

Since aqueous solutions are more convenient and affordable to handle, they are typically handled in bulk. When it is preferable to make a mixture more alkaline or to neutralise acids, sodium hydroxide is frequently utilised. For instance, sodium hydroxide is a drilling mud additive that is used in the petroleum sector to raise the viscosity and alkalinity of bentonite mud systems as well as to neutralize any acid gases that may be discovered in the geological formation as drilling advances. Salt also has a use.

M1V1 = M2V2

Learn more about sodium hydroxide here

https://brainly.com/question/29327783

#SPJ4