Answer:
2
Explanation:
the number of H is 1, it means the only electron is on the energy level (1st level, s-electron). All the elements have 2 s-electrons on the 1st energy level.
Some fireplace logs (commercially made) burn with a red and/or green flame. Using the information in this experiment, what elements could be responsible for these colored flames?
Answer:
Because each element has an exactly defined line emission spectrum, scientists are able to identify them by the color of flame they produce. For example, copper produces a blue flame, lithium, and strontium a red flame, calcium an orange flame, sodium a yellow flame, and barium a green flame. When you heat an atom, some of its electrons are "excited* to higher energy levels. When an electron drops from one level to a lower energy level, it emits a quantum of energy. ... The different mix of energy differences for each atom produces different colors. Each metal gives a characteristic flame emission spectrum
When I freeze a water bottle and it breaks open is it because the ice has more matter than the water inside?
Why does hot tea brew faster than cold tea? Provide scientific data.
Answer:
Increased heat makes all the molecules in the tea/water mix vibrate and move around a great deal more, thus increasing the rate of diffusion, and therefore increasing the rate of brewing.
Explanation:
hope i help lol :)
Please help me thanks so much!?!?
Answer:
false
Explanation:
chemical changes turn into new substances
How many total oxygen (O) atoms are present in the reactants side of the equation
C2H20H + 302 – 2002 + 3H20?
2
Answer:
there are 7 total oxygen (O) atoms are present in in the reactants side of the equation
what are the sources of error of electroplating?
Answer:
electroplating is host to several defects due to the complexity of the process. Common electroplating defects often include issues that are present before plating, such as cold shuts, pitting, sharp edges, cleavage points and unclean manufacturing. During plating, flaking or a loss of adhesion can occur.
Explanation:
The ozone "hole" over Antarctica formed as the result of a series of chemical reactions. The loss occurs in part through three consecutive steps in which ozone is broken down: Step 1: Chlorine atoms react with ozone (O3) to form chlorine monoxide and molecular oxygen. Step 2: Chlorine monoxide molecules combine to form ClOOCl gas Step 3: ClOOCl absorbs sunlight and breaks into chlorine atoms and molecular oxygen. a) Write a balanced equation for each step. b) Write an overall balanced equation for the sequence
Answer:
A)
Cl + O3 --> ClO + O2
2ClO --> ClOOCl
ClOOCl --> 2 Cl + O2
B)
Cl2 + 4O3 -> 2 ClO + 5O2
Explanation:
Step 1: Chlorine atoms react with ozone (O3) to form chlorine monoxide and molecular oxygen
Cl + O3 --> ClO + O2
Step 2: Chlorine monoxide molecules combine to form ClOOCl gas
2ClO --> ClOOCl
Step 3: ClOOCl absorbs sunlight and breaks into chlorine atoms and molecular oxygen
ClOOCl --> 2 Cl + O2
B) Overall Balanced equation
Cl2 + 4O3 -> 2 ClO + 5O2
Why is glass NOT a crystal?
A its is a solid
B it is transparent
C it is not a crystalline
D it fractures
Answer:
I think it's B- it is transparent
Answer:A
Explanation:Glass can not be classified as a crystal when it is in its amorphous phase.
The normal boiling point of a certain liquid X is 141.70 °C, but when 68.1 g of barium hydroxide (Ba(OH)) are dissolved in 750. g of X the solution boils at 142.5C instead. Use this information to calculate the molal boiling point elevation constant
Answer:
Explanation:
Normal boiling point = 141.7°C
Elevated boiling point = 142.5°C
Elevation of boiling point Δt = 0.8°C
Formula for elevation of boiling point is as follows .
Δt = 1000 x Kb x w / (MW )
where w is weight of solute , M is molecular weight of solute , W is weight of solvent in grams, Kb is molal boiling point elevation constant .
Mol weight of barium hydroxide = 171 .
.8 = 1000 x Kb x 68.1 / (171 x 750 )
Kb = 1.5°C / m
WORTH 40 POINTS HELLPPPP
What class of element is Astatine (At)?
Answer:
halogen.
nonmetal.
Explanation:
A flask contains 0.160 mol of liquid bromine, what are the number of bromine molecules present
Answer:
9.64 x 10^22
Explanation:
To go from moles to molecules, you multiply by Avogadro's number, 6.022 x 10^23, so you get 9.64 x 10^22.
Heat moves from what source by convection and radiation?
Answer:
heat can move from any source but if we are being legitimate it moves from convection
Explanation:
The octet rule states that atoms in molecules share electrons in such a way that each atom has a full valence shell. Determine whether each structure has the correct number of electrons and obeys the octet rule. Classify structures that have the correct number of electrons and obey the octet rule as valid, and those that do not as invalid. valid structure invalid structure
Answer:
Their must be a picture with this question so we can answer it
Explanation:
According to octet rule the bonded valence shells are completely filled. All the compounds except the first one, CH₃CH₃O is invalid since H does not obey the rule and invalid.
What is octet rule?Octet rule says that an atoms become stable when it completes its valence shell to 8 electrons or 2 electrons for K-shell. Thus bonded shells have to completely filled to be stable.
Each atom shares its electrons based on its valency. For example carbon have a valency of 4 and it forms for bonds and oxygen and sulfur have two and hydrogen forms only one bonds.
In the first compounds CH₃CH₃O, where one H forms two bonds which is not possible and invalid.
In the second compound CONH, all the atoms satisfies its valency including nitrogen having a valency of three forms three bonds. Similarly in CH₂F₂, one fluorine forms one bond and the structure is valid.
In the case of Br₂ , each bromine shares one electron with the other and complete their octet to eight electrons. In NH₃, SCO and COCl₂ all the atoms satisfies their valency and the structures are valid.
Therefore the only invalid structure is first compound, remaining all are valid.
To find more about octet rule, refer the link below:
https://brainly.com/question/11657564
#SPJ2
Your question is incomplete. But most probably your complete question was as in the uploaded image.
An early version of the Periodic Table had the elements listed in order of increasing relative atomic
mass instead of increasing atomic number. Doing so today would result in the reordering of three
pairs of elements in the first five periods. Identify the three element-pairs.
Answer:
Although he was unaware ofit, Mendeleev had actually placed the elements inorder of increasing “atomic number,” a numberrepresenting the amount of positively charged protons in the atom (also thenumber of negatively charged electronsthat orbit the atom). Mendeleev went even further.
Molecule A undergoes isomerization to molecule B in acetone. Using curved arrows, showing key intermediates and any formal charges, propose a detailed mechanism for this isomerization. Provide a brief explanation why this isomerization occurs.
Answer:
hello your question is incomplete attached below is the complete question
answer :
we use Isomerization because conjugated allylic carbocation is more stable when compared to a Non-conjugated Allylic carbocation
Explanation:
Reason for the mechanism
we use Isomerization because conjugated allylic carbocation is more stable when compared to a Non-conjugated Allylic carbocation
attached below is the detailed mechanism
What best describes how the processes of scientific
investigation and technological design are involved in
this situation?
O The clothing company conducted a scientific
investigation to communicate results to researchers,
who then used the knowledge in a technological
design.
O The clothing company conducted a scientific
investigation to produce a product that researchers
could then test while designing new technology.
O The clothing company used technological design to
create a product that helped aid researchers
conducting a scientific investigation.
O The clothing company designed a new technology
that provided information researchers needed in order
to continue with their scientific investigation.
Answer:
O The clothing company conducted a scientific investigation to communicate results to researchers, who then used the knowledge in a technological
design.
Explanation:
The products of scientific investigation are converted into technology for use engineers.
Engineering is the application of science to solve life problems. Science in itself is an inquiry into nature.
Science uses a series of methodical approaches to conduct investigations and researches. The product of the research is taken up by an engineer. The engineer deploys this into the right and applicable technology available. In the clothing company, the product of the investigation are relayed to the engineers who uses technological innovations to design a new tool for use.How many moles of phosphoric acid would be needed to produce 15 grams of water?
Moles of phosphoric acid would be needed : 0.833
Further explanationGiven
15 grams of water
Required
moles of phosphoric acid
Solution
Reaction(decomposition) :
H3PO4 -> H2O + HPO3
mol water (H2O :
= mass : MW
= 15 g : 18 g/mol
= 0.833
From the equation, mol ratio H3PO4 = mol H2O = 1 : 1, so mol H3PO4 = 0.833
Which equation shows how to solve for enthalpy of solution based on the information in tables?
Answer: B. triH sol Mgl2= -triHlat+ triHhydr Mg^2+ 2triHhydr^l-
Explanation:
Just did it and it was right
what is the formula for H-H
Answer:
H-H equation is written as follows:
pH=pK + log
{HCO3-}(base)
{H2CO3}(acid)
A quantity of water is heated from 25.0°C to 36.4°C by absorbing 325 J of heat energy. If the specific heat of water is 4.18 J / g°C, what mass is this quantity of water?
Answer:
6,8 g
Explanation:
c = 4.18 J/(g * °C) = 4180 J / (kg * °C)
[tex]t_{1}[/tex] = 25 °C
[tex]t_{2}[/tex] = 36,4 °C
Q = 325 J
The formula is: Q = c * m * ([tex]t_{2} - t_{1}[/tex])
m = [tex]\frac{Q}{c * (t_{2} - t_{1} )}[/tex]
Calculating:
m = 325 / 4180 * (36,4 - 25) ≈ 0,0068 kg = 6,8 g
The mass of the quantity of water heated from 25.0°C to 36.4°C by absorbing 325 J of heat energy is 6.8grams.
HOW TO CALCULATE MASS:
The mass of a substance can be calculated by using the following formula:
Q = m × c × ∆T
Where;
Q = quantity of heat absorbed (J)c = specific heat capacity (4.18 J/g°C)m = mass of substance∆T = change in temperature (°C)According to this question;
m = ?
∆T = 36.4°C - 25°C = 11.4°C
Q = 325J
325 = m × 4.18 × 11.4
325 = 47.65m
m = 325 ÷ 47.65
m = 6.8g
Therefore, the mass of the quantity of water heated from 25.0°C to 36.4°C by absorbing 325 J of heat energy is 6.8grams.
Learn more about specific heat capacity at: https://brainly.com/question/2530523?referrer=searchResults
What element has the same electron configuration of 1s2 2s2 2p6 3s2 3p6 ?
Answer:
Ar
Explanation:
1s2|2s2 2p6|3s2 3p6 means 2+2+6+2+6=18 electrones. Also it means the number in the table.
According to the №18 the requested element is Argon.
The element argon with atomic number 18 is found to has the electronic configuration 1s² 2s² 2p⁶ 3s² 3p⁶. Here the element 'Ar' belongs to the 18th group of the periodic table.
What is electronic configuration?The electronic configuration is defined as a method which represents the arrangement of electrons in the atomic orbitals. Each of the elements have a unique electronic configuration.
The physical, chemical and magnetic properties of the elements can be predicted by knowing their electronic configuration. Sometimes the term electron structure can also be used instead of electronic configuration.
The species K⁺ ion has the same electronic configuration of 'Ar'. The atomic number of 'K' is 19 and K⁺ is formed by the lose of one electron from 'K'. Here K⁺ has 18 electrons and its electronic configuration is:
1s² 2s² 2p⁶ 3s² 3p⁶.
Thus the element argon has the electronic configuration 1s² 2s² 2p⁶ 3s² 3p⁶.
To know more about the electronic configuration, visit;
https://brainly.com/question/30161188
#SPJ6
Submit your organization chart about the fictional elements. Remember to proofread your work before submitting.
Answer:
follow the picture,,, it includes the normal elements too
The reason why I organized these specific elements from the list of elements that you provided me is because they have to do with color. I believe organizing by color would be much easier for me to understand. There is also a somewhat equal amount for each color. For example I used the colors: orange, green and red In my chart because there are four of each color in the list you provided me.
identify the reactants and products in the following chemical reaction C r 2 O 3 + 3 C ---> 2cr + 3CO
Answer:
Cr2O3 and 3C are the reactants
2Cr and 3CO are the products
Explanation:
Cr2O3is reacting with 3C to form 2Cr + 3CO
What is important to do after an experiment to make sure the results are valid and reliable? PLEASE ANSWER ASAP!!! IF YOU ANSWER CORRECTLY I WILL GIVE POINTS AND BRAINLIEST! THANK YOU :)
1 Define Soft water and Hard water.
Answer:
software is a collection of codes installed onto your computer hard drive and hardware is any physical device that we used in or with your machine.
hope it helps.
Answer: soft water is water with a low concentration of ions and hard water is one with a high concentration of water e.g rainwater
Explanation:
The atomic number of an atom is always equal to the total number of
A. neutrons in the nucleus
B. protons in the nucleus
C. neutrons plus protons in the atom
D. protons plus electrons in the atom
Answer:
yep C is correct!!
Explanation:
A chemist has a block of copper metal (density is 8.96). They drop the metal into a graduated cylinder containing water, and find the volume change is 2.90 mL. What is the mass of the block , in grams?
Answer:
26g
Explanation:
Given parameters:
Density = 8.96g/cm³
Volume of metal = 2.9mL
Since 1mL = 1cm³;
Volume = 2.9cm³
Unknown:
Mass of the blocks in grams = ?
Solution:
Density is the mass per unit volume of a substance;
Mass = density x volume = 8.96 x 2.9 = 26g
The density of a sample of gasoline is 0.70 g/cm3. What is the mass of 1 liter of this gasoline?
Group of answer choices
0.7 g
70 g
700 g
1,429 g
Answer:
700g
Explanation:
Given parameters:
Density of gasoline = 0.7g/cm³
Volume of gasoline = 1L = 1000cm³
Unknown:
Mass of the gasoline = ?
Solution:
Density is the mass per unit volume of a substance. It can be expressed as;
Density = [tex]\frac{mass}{volume}[/tex]
So;
Mass = density x volume
Mass = 0.7 x 1000 = 700g
What is the iupac name of the following compound?
2,2-dimethyl-4-ethylheptane
Answer:
The IUPAC name of the compound has already been given which is 2,2-dimethyl-4-ethylheptane.
Explanation:
The IUPAC (International Union of Pure and Applied Chemistry) is an authority in chemistry that provides a guideline and standardized methods in the naming of compounds formed from the periodic table.
In order the give an IUPAC name to a compound, certain steps needs to be followed, these includes:
--> Identify the functional group in the compound as this will form the suffix. For example if the functional group is an alkane the suffix will be -ane.
--> Identify the longest carbon chain (it may not be a straight chain) that contains the functional group. This forms the prefix. Example: if the longest carbon chain is 7 carbon atoms then the prefix will be hept-
--> All the carbons of the longest chain should be numbered
--> Identify branched groups on the chain and name them according to the number of carbon atoms. They usually end with -yl.
--> Finally, combine the elements of the name is a single word.
The structural formula of the IUPAC compound can be found in the attached file for a better understanding. The branched groups are circled.
A mixture in which one substance is evenly mixed with another substance is called a..
A) Solvent
B)Solute
C)Solution
D) Heterogeneous
Answer:
C solution
Explanation:
i hope that i got it right im not very good with questions