Answer:
nuclear fusion
Explanation:
A 20 ml solution of sugar with a concentration of
1.0M is diluted to 120 mL, what is the new
concentration?
Answer:
M₂ = 0.16 M
Explanation:
Given data:
Initial volume of solution = 20 mL
Initial concentration = 1.0 M
Final volume = 120 mL
Final/new concentration = ?
Solution:
Formula:
M₁V₁ = M₂V₂
by putting values,
1.0 M × 20 mL = M₂ × 120 mL
M₂ = 1.0 M × 20 mL / 120 mL
M₂ = 20 M.mL /120 mL
M₂ = 0.16 M
Write the chemical equation:
hydrogen peroxide decomposes to yield oxygen gas and water.
Explanation:
2 H2O 2 → 2H 2 O + O2.........
Please help me
What type of action is happening to location B?
Group of answer choices
subduction
divergent
convection
conduction
Answer:
divergent
Explanation:
I believe it is divergent.
Which of the following was not used as evidence to support
continental drift?
A. Continents fitting like puzzle pieces
B. Comparison of regional monsoon variability
C. Similar fossilized organisms found throughout each continent
D. Matching bedrock in Africa and South America
Answer:
B.
Explanation:
Lol notes brought everything but B. Up
what oh yes but no? so yes if no but but no yes then no?
Answer:
ummmm id say god bless you :P
Explanation:
In addition to having a blue color, what other characteristic do Neptune and Uranus share?
no rings
27 moons
no axis tilt
cold temperatures
Answer:
no rings
Explanation:
Answer:
d: cold temperatures
Explanation:
Which substance is most likely metallic
The substance which is most likely metallic is that with least number of valence electrons according to electronic configuration.
What is electronic configuration?
Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.
Learn more about electronic configuration,here:
https://brainly.com/question/29184975
#SPJ6
Which of the following is NOT naturally found as a diatomic
gas?
O Chlorine
O Neon
O Oxygen
O Nitrogen
O Hydrogen
Answer:
Neon
Explanation:
Calculate the energy of a photon of radiation with a wavelength of 6.4 x 10-5 m.
Answer:
The energy is
=
3.11
⋅
10
−
19
J
Explanation:
i hope this helps
Which best describes the difference between radiation and conduction? (1 point)
A.) Conduction cannot happen when both objects are solids.
B.)
Conduction requires two objects to be in physical contact.
C.)
Conduction can occur between two objects that are very far apart.
D.)
Conduction decreases the movement of the atoms in both objects.
Answer:
B) Conduction requires two objects to be in physical contact.
Explanation:
Conduction is when two objects are directly touching each other. So, the objects must come in physical contact with each other.
What would you expect the charge on a bromide ion to be? Why?
The Element Bromine belongs to the 7th group "THE HALOGENS" in the periodic table. The general oxidation number of the Halogens is -1 thus Charge on bromide ion is expected to be -1.
______________________________________Choose all the answers that apply.
Electricity
can be created by moving magnets through a coll of copper wire.
can be used to create a magnetic field.
is caused by moving protons.
flows from negative to positive.
is created by the movement of electrons.
Answer:
can be created by moving magnets through a coll of copper wire.
can be used to create a magnetic field.
flows from negative to positive.
is created by the movement of electrons.
Explanation:
What is the ratio of the side lengths on polygon FGHIJ to the corresponding side lengths on polygon ABCDE? Enter the ratio in the table. How does this ratio relate to the scale factor of the dilation?
Explanation:
this is the exact answer!!
Answer:
The ratio of the side lengths on FGHIJ to the corresponding side lengths on ABCDE is 1 : 2. The scale factor of the dilation that takes the size of ABCDE to the size of FGHIJ is 0.5. The ratio of corresponding side lengths is equal to the scale factor of dilation.
Ratio: 1:2
Explanation:
PLATO
the ratio is 1:2 all the way down for all 5 sections of the side lengths
Which statement describes the moment magnitude scale? Sorry if problemy not chemistry.
Answer:
Explanation:
The moment magnitude scale is a scale that rates earthquakes by estimating the total energy released by an earthquake . Estimating the total amount of energy released, enables comparison of earthquakes more accurately
i hope this helps :)
define Nuclear Fission with an example of it
Answer:
Fission is the splitting of an atomic nucleus into two or more lighter nuclei accompanied by energy release. ... The energy released by nuclear fission is considerable. For example, the fission of one kilogram of uranium releases as much energy as burning around four billion kilograms of coal
Explanation:
The area of a square is 200 cm2. What is an
estimation of its side?
a) 20 cm
C) 14 cm
b) 10 cm
d 50 cm
Answer:
14cm
Explanation:
s x s=area
s²=200cm²
s=14.1421356237cm
s=14cm
Match the element with its description. Match Term Definition Sodium A) Has properties of both metals and nonmetals Silicon B) Highly reactive gas Bromine C) Malleable, soft, and shiny Argon D) Nonreactive gas
Answer:
Sodium - malleable, soft, and shiny
Silicon - has properties of both metals and nonmetals
Bromine - highly reactive gas
Argon - non-reactive gas
Explanation:
Sodium is an alkaline metal. Just like other alkaline metals, it's malleable, soft, and shiny.
Silicon is a metalloid. Metalloids are elements that have properties of both metals and nonmetals.
Bromine a highly reactive chemical element. It is a fuming red-brown liquid at room temperature that evaporates to form a similarly coloured gas.
Argon is a noble gas. Just like other noble gases, it's non-reactive.
Chemists want to place 2 x 10^24 atoms of carbon in a chemical reaction. How would they obtain this amount?
Answer:
Explanation:
To determine what is been asked in this question, firstly, the formula to determine the number of atoms present in a substance must be used. The formula is
number of atoms = n × 6.02 × 10²³
where n is the number of moles
6.02 × 10²³ is avogadro's number
The number of atoms needed (to be present) has already been provided in the question as 2 × 10²⁴
Thus;
2 × 10²⁴ = n × 6.02 × 10²³
n = 2 × 10²⁴ ÷ 6.02 × 10²³
n = 3.32
The number of moles of carbon that will be placed in the reaction will be 3.32 but to determine the amount/mass of carbon that will be used in the reaction, we will use the formula
n = mass/molar mass
The molar mass of carbon is 12 g/mol
Thus;
3.32 = mass/12
mass = 3.32 × 12
mass = 39.84 g
The mass of carbon that will be required for the reaction will be 39.84, the procedure above shows how to obtain this amount.
How many atoms of oxygen are in the following compound? Ba3(PO4)2
Answer: 8 atmos
Explanation: In one formula unit of barium phosphate there are 3 atoms of barium (Ba) (2)(1) = 2 atoms of phosphorus (P) (2)(4) = 8 atoms of oxygen (O).
2) A gas takes up a volume of 15 liters, has a pressure of 3.3 atm, and a temperature of
299 K. If I raise the temperature to 350 K and lower the pressure to 1050 mmHg, what is the
new volume of the gas?
3) A gas that has a volume of 28 liters, a temperature of 65 °C, and an unknown pressure
has its volume increased to 36 liters and its temperature decreased to 35 °C. If I measure the
pressure after the change to be 2.0 atm, what was the original pressure of the gas?
work too pls !!! thank you so much !!!
Answer:
Explanation:
[tex]\frac{P1V1}{T} = \frac{P2V2}{T2} = \frac{3.3 *15}{299} = \frac{1050*V}{760*350}[/tex]
v= 41.9 L
b) using the same formula as above [tex]P1= \frac{P2V2*T1}{T2 * V1}= \frac{36*2*338}{308*28} = 2.8 atm[/tex]
hope it helps
Add 2 teaspoons of baking soda and 2 teaspoons of citric acid to the foam cup. Add the half cup of water to the cup and stir. Is a chemical reaction taking place? How do you know?
Answer:
Yes a chemical reaction is taking place
Explanation:
In this cooking procedure, a chemical reaction is taking place because the citric acid and the baking soda are both chemical species combining together.
At the end a new produce is formed. It is accompanied by a release of heatThe stirring helps to increase the rate of chemical reaction between the citric acid and baking sodaAnswer:
The temperature for it is between 50-55 degrees
Explanation:
In the liquid, there are hydrogen bonds that form between molecules of water and covalent bonds that form between hydrogen and oxygen within a water molecule. Which statement(s) are true about When water is boiling, which statement(s) are true?
a) The covalent bonds between hydrogen and oxygen are broken.
b) The hydrogen bonds between water molecules are broken.
c) both are true
d) neither are true
Answer:
c
Explanation:
How does the level of intermoleculars bonding between the particles in matter affect the state of matter the particles are taking
Explanation:
Intermolecular force s between particles in a matter holds particles of molecules together in substances.
The stronger the intermolecular forces the more solid a substance is. The weakest intermolecular attraction are found in gases as they have negligible attractive forces in between their particles. Solids are held together by very strong attractive forces. Liquids have weak forces holding them in place and this allows for a little movement. Gases are typically have very weak to negligible attractive forces.The
percent yield for the reaction in which 15.6 g of aluminum
hydroxide is reacted in excess hydrogen chloride gas is 92.5
%. What is the actual yield of aluminum chloride?
Answer:
24.6
Explanation:
N2 + 3 H2 --> 2 NH3
The balanced equation above indicates that if 2 moles of N2 react, then
2 moles of H2 will also react
3 moles of H2 will also react
4 moles of NH3 will be produced
2 moles of NH3 will be produced
Answer:
4 moles of NH3 will be produced
Explanation:
The reaction expression is given as:
N₂ + 3H₂ → 2NH₃
We have to check that the equation of the reaction is balanced.
Then;
if 2 mole of N₂ reacts;
1 mole of N₂ will react with 3 mole of H₂ to produce 2 mole of NH₃
2 mole of N₂ will react with (2x3)mole of H₂ to produce (2x2)mole of NH₃
6mole of H₂ to produce 4 mole of NH₃
Answer:
According to the balanced chemical equation N2 + 3 H2 --> 2 NH3, for every 1 mole of N2 that reacts, 3 moles of H2 are required to react completely to form 2 moles of NH3. Therefore, if 2 moles of N2 react, then 6 moles of H2 will also react to form 4 moles of NH3.
So the correct answer is: 6 moles of H2 will also react, and 4 moles of NH3 will be produced.
Explanation:
PLZ HELP!! WILL GIVE BRAINLIEST
Two students made the Lewis dot diagrams of H2O. The diagrams are as shown.
Two visual diagrams of an H two O molecule are shown. Student As diagram on the left has oxygen at the center and connects with two hydrogen atoms by way of straight lines. There are two pairs of dots above the oxygen atom. Student Bs diagram is identical except it has one pair of dots and instead of lines, and it has an arrow between the oxygen and each hydrogen.
Which student drew the correct Lewis dot diagram?
Only Student A
Only Student B
Both Student A and Student B
Neither Student A nor Student B
Answer:
It is only student A
Explanation:
I just took the quiz and got a 100% good luck to whever is reading this.
Student A has drew the correct Lewis dot diagram.
What is Lewis Structure?The valence shell electrons in a molecule are depicted in an extremely simplified manner by a Lewis Structure. It is used to demonstrate how the electrons in a molecule are positioned around particular atoms.
Electrons are shown as "dots" or, in the case of a bond, as a line connecting the two atoms. The octet rule and formal charges must be met in order to achieve the "optimal" electron configuration.
Lewis electron dot structures, Lewis dot diagrams, and electron dot structures are a few names for Lewis structures. All of these titles allude to the same type of diagram that is used to depict the positions of bonds and electron pairs.
Therefore, Student A has drew the correct Lewis dot diagram.
To learn more about Lewis structure, refer to the link:
https://brainly.com/question/20300458
#SPJ2
12. What is the smallest particle that can be called an element?
Answer:
Atom
Explanation:
Answer:
atom
Explanation:
oof its atom but i need 2p characters
Week 12.1 & 2
Monday/Tuesday 11/30 - 12/01/20
19
Talling
1. Most elements that form a zigzag line in the
periodic table belong to which major group?
2. True or False- metalloids make up most of the
elements on the periodic table.
3. Would Co, and NaCl be considered an element
or compound? Explain.
os E 240 PM
11/30/20
Answer:
1 metalloids
2 false
3 compound because it has more than one letter.
Explanation:
Given the nuclear equation: 19Ne → X + 19F What particle is represented by X?
alpha
beta
neutron
positron
Answer:
Beta
Explanation:
Answer:
Positron
Explanation:
Castle learning
what is a catalyst?what is the catalyst used for manufacturing ammonia?
Answer:
finely divided iron is used as catalyst in the manufacture of ammonia by haber's process