Using Phosphoric acid will work perfectly for producing Hydrogen halides because its not an Oxidizing agent. ...
Using an ionic chloride and Phosphoric acid
H3PO4 + NaCl ==> HCl + NaH2PO4
H3PO4 + NaI ==> HI + NaH2PO4
H2SO4 + NaCl ==> HCl + NaHSO4
This method(Using H2So4) will work for all hydrogen hydrogen halide except Hydrogen Iodide and Hydrogen Bromide.
The Sulphuric acid won't be useful for producing Hydrogen Iodide because its an OXIDIZING AGENT. Whist producing the Hydrogen Iodide... Some of the Iodide ions are oxidized to Iodine.
2I-² === I2 + 2e-
PLSS HELPP ME i dont knowww
Answer:
non polar. polar ionic substance
if 19.1 mL of 1.26 M HBr is headed to 23.7g of CAC03 what volume of CO2 would be produced as 713.6 torr and 29.9°C
Answer:
0.32 L
Explanation:
The equation of the reaction is;
2HBr(aq) + CaCO3(s) ----->CaBr2(aq) + H2O(l) + CO2(g)
The number of moles HBr reacted = 19.1/1000 L * 1.26 M = 0.024 moles
According to the reaction equation;
2 moles of HBr produces 1 mole of CO2
0.024 moles of HBr produces 0.024 * 1/2 = 0.012 moles of CO2
For CaCO3
Number of moles = 23.7g/100 g/mol = 0.237 moles
Since the reaction is 1:1, 0.237 moles of CO2 is produced.
Hence HBr is the limiting reactant and 0.012 moles of CO2 is produced.
From PV =nRT
V = nRT/P
P= 713.6 torr
n= 0.012 moles
T = 29.9°C + 273 = 302.9 K
R = 62.36 L torr/mol K
V = 0.012 * 62.36 * 302.9/713.6
V = 0.32 L
Find the horizontal range of a projectile launched at 15 degrees to the horizontal with speed of 40m/s
To Find :
The horizontal range of a projectile launched at 15 degrees to the horizontal with speed of 40 m/s.
Solution :
The horizontal range of a projectile is given by :
[tex]R = \dfrac{u^2 sin 2\theta}{g}[/tex] ( Here, g is acceleration due to gravity = 10 m/s² )
Putting all value in above equation :
[tex]R = \dfrac{40^2 \times sin (2 \times 15)}{10} \ m\\\\R = \dfrac{1600 \times 1}{2\times 10} \ m\\\\R = 80 \ m[/tex]
Therefore, the horizontal range of projectile is 80 m.
Calculate the molecular mass of sodium trioxocarbonate (iv) decahydrate
Answer:
106.180
Explanation:
maybe this is the correct answer
I SAID MAYBE
Question 1
Where does photosynthesis happen in a plant cell?
O Cell membrane
O Cell wall
O Chloroplast
O Mitochondria
Answer:
Chloroplast
Explanation:
Photosynthesis happens in chloroplast of plants. Mitochondira is where the cellular respiration happens.
Look at the reaction below. Upper H subscript 2 upper S upper O subscript 4 (a q) plus upper C a (upper O upper H) subscript 2 (a q) right arrow upper C a upper S upper O subscript 4 (a q) plus 2 upper H subscript 2 upper O (l). Which substance is the base in the reaction? A. 2H2O (l) B. H2SO4 (aq) C. CaSO4 (aq) D. Ca(OH)2 (aq)
Answer:
Its D
Explanation:
Did it on edge
According to the reaction: H₂S0₄ + Ca(OH)₂ → CaSO₄+ 2H₂O, the base is Ca(OH)₂.
What is a base?Base is defined as a substance which can accept protons or any chemical compound that yields hydroxide ions (OH-) in solution.
Generally, base are substances that produces hydroxide ion when dissolve in water.
Base are substances that reacts with acid to produce salt and water. Example of base includes sodium hydroxide, potassium hydroxide, magnesium hydroxide, calcium hydroxide etc.
Therefore, according to the reaction:
H₂S0₄ + Ca(OH)₂ → CaSO₄+ 2H₂O
The base is Ca(OH)₂.
learn more on chemical reaction here: https://brainly.com/question/14575718
What is the pH if the [H+] concentration is 3 x10^-13
Answer:
pH = 12.52
Explanation:
Given that,
The [H+] concentration is [tex]3\times 10^{-13}[/tex].
We need to find its pH.
We know that, the definition of pH is as follows :
[tex]pH=-log[H^+][/tex]
Put all the values,
[tex]pH=-log[3\times 10^{-13}]\\\\pH=12.52[/tex]
So, the pH is 12.52.
Which of the following statements is FALSE. Select one: A. Two of the statements are false. B. In the synthesis of aspirin, the main impurities are salicylic acid and acetic acid. C. Aspirin was purified in the lab by recrystallizing the crude aspirin. The melting point of the purified aspirin is expected to be lower than the melting point of crude aspirin. D. In the analysis of aspirin, the greater the amount of salicylic acid impurity in the aspirin, the smaller the amount of NaOH needed for the hydrolysis of aspirin. E. If the crude aspirin is not entirely pure, the temperature range at which it melts will be larger than pure aspirin.
Answer:
Aspirin was purified in the lab by recrystallizing the crude aspirin. The melting point of the purified aspirin is expected to be lower than the melting point of crude aspirin.
Explanation:
The presence of impurities in a sample lowers the melting point of the impure substance. Hence the melting point of an impure substance is always less than the melting point of the corresponding pure substance.
Bearing this in mind, the statement "Aspirin was purified in the lab by recrystallizing the crude aspirin. The melting point of the purified aspirin is expected to be lower than the melting point of crude aspirin." is found to be false since impure substances tend to have a slightly lower melting point than the pure substance, and a broader melting temperature range.
Which compounds are most likely ionic? compounds A and B O compounds B and C compounds C and D O compounds D and A
Answer:
compounds D and A
Explanation:
The ionic compound can conduct electricity therefore, the compounds A and D are most likely ionic. Therefore, option (4) is correct.
What are ionic compounds?Ionic compounds can be defined as crystalline solids produced by closely packed ions with opposite charges. The formation of an Ionic compound takes place when metal reacts with non-metal.
In ionic compounds, the ions of the compound are generally linked together by ionic bonds. The ions of an atom are formed by gaining or losing electrons in order to get the noble gas electronic configuration.
In a reaction, the metals are generally electropositive so they can lose electrons to complete their octet while non-metals will gain electrons from the metals to complete their octet.
Ionic compounds can conduct electricity in a molten state and aqueous solution because then they have free ions that can move from one place to another to conduct an electric current.
Learn more about ionic compounds, here:
brainly.com/question/17217225
#SPJ6
g What is the relationship between the moles of the limiting reagent and the change in temperature (i.e. directly proportional or indirectly proportional)
Answer:
number of moles is inversely proportional to the Temperature
Explanation:
As we know
PV = nRT
where P is the pressure
V is the volume
n is the number of moles
R is the gas constant
and T is the temperature
If we see the equation, we can find that n is inversely proportional to the Temperature
How many liters of carbon dioxide gas are produced from 0.012 moles oxygen and excess propane at STP? 1 C3H8 (g) + 5 O2 (g) → 3 CO2 (g) + 4 H2O (g) ______ Liters CO2
Answer:
0.16 L
Explanation:
Step 1: Write the balanced equation
C₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(g)
Step 2: Calculate the moles of CO₂ produced from 0.012 moles of O₂
The molar ratio of O₂ to CO₂ is 5:3. The moles of CO₂ produced are 3/5 × 0.012 mol = 0.0072 mol.
Step 3: Calculate the volume occupied by 0.0072 moles of CO₂ at standard temperature and pressure
At STP, 1 mole of CO₂ occupies 22.4 L.
0.0072 mol × 22.4 L/1 mol = 0.16 L
If a point is chosen inside the square, what
is the probability that it will also be inside the
circle?
1
Point to be present exactly at midway between center and circumference of circle (let’s say radius = r) should lie at circumference of circle of radius r/2.
Favorable outcome = 2*pi*r/2
Total outcome = Point can be anywhere inside the circle of radius r = Area of circle = pi * r * r
Probability = (2*pi*r/2) / pi * r* r = 1/r.
Not completely sure about correctness . Waiting for comments to verify.
The idea that light can act like packets led to what new field on science?
Light acting as 'packets' of exact amounts of energy (a particle-like quality) called quanta led to the development of quantum mechanics. Light also has wave qualities (wavelength, frequency, amplitude) which is referred to as particle-wave duality.
In the reaction between CH4 and O2, if 25.0 g of CO2 are produced, what is the minimum amount of each reactant needed?
PLS HELP
Answer:
25 gram
Explanation:
the minimum amount of the reactant needed is equal to the mass of the product because of the law of conservation of mass ok
What is the temperature of 0.750 mol of a gas stored in a 6,050 mL cylinder al 221 atm?
atm
Use and
molek
5.24K
138 K
246 K
Answer:
T = 246 K
Explanation:
Given that,
Number of moles, n = 0.750 mol
The volume of the cylinder, V = 6850 mL = 6.85 L
Pressure of the gas, P = 2.21 atm
We need to find the temperature of the gas stored in the cylinder. We know that,
PV= nRT
Where
R is gas constant
T is temperature
So,
[tex]T=\dfrac{PV}{nR}\\\\T=\dfrac{2.21\times 6.85}{0.75\times 0.0821}\\T=245.85\ K[/tex]
or
T = 246 K
So, the temperature of the gas is equal to 246 K.
Calculate the volume of an
object with dimensions
measuring:
9.0 mm x 2.0 mm x 2.0 mm
[ ? ] mm3
Answer:
9.0mm x 2.0mm x 2.0mm
= 18mm3
Answer:
36mm^3
Explanation:
This is easy
Please help this is due tonight
Help plz:)))I’ll mark u Brainliest
Explanation:
LCCEB is the answer
Which point defect in its crystal units alters the density of a solid?
please please answer
Answer:
Schottky defect
Explanation:
Schottky defect in crystals units alters the density of a solid.
How many total carbon atoms are in the structure 2 methyl, 3, 4 diethyl decane?
12
15
14
10
Answer:B
15 carbon atoms
What types of reactions are these 3 chemical equations?-
*2Kl+Pb(NO3)2=PbI2+2KNO3
*2Al+3CuSO4=Al2(SO4)3+3Cu
*C2H5OH+3O2=2CO2+3H2O
Answer:
*2Kl+Pb(NO3)2=PbI2+2KNO3: double replacement.
*2Al+3CuSO4=Al2(SO4)3+3Cu: single replacement.
*C2H5OH+3O2=2CO2+3H2O: combustion.
Explanation:
Hello there!
In this case, according to the required, it turns out necessary for us to recall the five types of reactions, combination, decomposition, single and double replacement and combustion as shown on the attached figure.
In such a way, since the first reaction follows the pattern AB+CD-->AD+CB we infer it is double replacement; the second reaction follows the patter A+BC-->AC+B and therefore it is single replacement; and the last one follows the pattern of combustion reaction due to the presence of CO2 and H2O on the products side.
Regards!
Alcohols have more hydrogen bonding .
(True or False) ?!
Answer:
True
Explanation:
An alcohol is an organic molecule containing an -O-H group. Any molecule which has a hydrogen atom attached directly to an oxygen or a nitrogen is capable of hydrogen bonding.
How many grams of oxygen are necessary to react completely if you have 4.0 moles of oxygen
Answer:
1.3 × 10² g
Explanation:
Step 1: Given data
Moles of oxygen: 4.0 mol
Step 2: Calculate the mass corresponding to 4.0 moles of oxygen
For a given chemical reaction, we need 4.0 moles of oxygen and we want to find what mass in grams it represents. To convert moles to mass, we need a conversion factor: the molar mass. The molar mass of oxygen is 32.00 g/mol.
4.0 mol × 32.00 g/mol = 1.3 × 10² g
NEED HELP ASAP!!!.....Which is not true about the ionic compound sodium chloride (NaCl)? A.)it was formed when electrons were shared B.)it is electrically neutral C.)it has properties different from the atoms from which it is formed D.)it is a white crystalline solid
El osmio es un metal sólido que tiene una densidad
de 22 600 kg/m?, ¿qué volumen ocuparán 100 g de
este metal?
Respuesta:
4.42 × 10⁻⁶ m³
Explicación:
Paso 1: Información provista
Densidad del osmio (ρ): 22600 kg/m³Masa de osmio (m): 100 gPaso 2: Convertir 100 g a kilogramos
Usaremos el factor de conversion 1 kg = 1000 g.
100 g × 1 kg/1000 g = 0.100 kg
Paso 3: Calcular el volumen ocupado por 0.100 kg de osmio
La densidad es una propiedad intensiva, igual al cociente entre la masa y el volumen.
ρ = m/V
V = m/ρ
V = 0.100 kg / (22600 kg/m³) = 4.42 × 10⁻⁶ m³
Which reaction represents a double replacement reaction?
A
C2H4 + 302 --> 2CO2 + 2H2O
B
NH3 + H20 --> NH4OH
с
CuBr2 + 2K --> 2KBr + Cu
D
2FeCl3 + 3Na2CO3 --> Fe2(CO3)3 + 6Naci
Answer:
D
Explanation:
D shows a double displacment reaction
the other ones show combustion, synthesis and single displacment
Los catalizadores sirven para detener una reacción química ?
Answer:
si
Explanation:
Los catalizadores son sustancias que aceleran una reacción química, proporcionando una ruta alternativa para romper y formar nuevos enlaces entre átomos. Su importancia reside en el hecho de que este nuevo camino requiere menos energía que el original, lo que facilita el proceso.
Chemical properties of an element are primarily dependent upon Group of answer choices the electron configuration of the element atomic weight of the element the number of main energy levels (electron shells) of the element the number of electrons in the innermost shell of the atom
Answer:
The answer is "the electron configuration of the element".
Explanation:
Electronics are distributed in atomic and molecular orbit via electrons from an atom or a molecule.
It reflects a most frequent dependence on valence electrons in the outer.
Through analyzing the context of the regular periodic table, the individual atoms are helpful. That's also important to understand chemical connections, which hold electrons together. This similar approach helps to explain the specific characteristics of lasers or semiconductors for bulk materials.
ved:
Chapter
Chapter List
CH5.3
Problem
Problem List
10SMB
Printed circuit boards are used in the electronics industry to both connect and hold components in place. In production, 0.03 in. of copper foil is laminated to an insulating plastic board. A circuit pattern made of a chemically resistant polymer is then printed on the board. Next, the unwanted copper is chemically etched away by using selected reagents. If copper is treated with Cu(NH3 ) 4Cl2 (cupric ammonium chloride) and NH4OH (ammonium hydroxide), the products are water and Cu(NH3) 4Cl (cuprous ammonium chloride). Once the copper is dissolved, the polymer is removed by solvents, leaving the printed circuit ready for further processing. If a single-sided board 4 in. by 8 in. is to have 75% of the copper layer removed using these reagents, how many grams of each reagent will be consumed? Data: The density of copper is 8.96 g/cm3.
ladoooooooooioooooioiiioooo
The stream table shows the time needed for water to soak into the playfield soil.
Answer:
TRUE
Explanation:
plz brian list
Answer:
True
Explanation: