Answers
6) When 10.000 g of a hydrated compound are analyzed in the laboratory, the following analysis is obtained: 1.425 g of water, 5.462 g of lead, 1.266 g of carbon, 1.687 g of oxygen, and 0.160 of hydrogen. What are the name and formula of the compound?
The name and formula of the compound can be determined by analyzing the data given in the question. Based on the information provided, the compound contains lead, carbon, oxygen, and hydrogen. The molecular formula for the compound can be determined by adding up the number of atoms of each element present.
From the data given, the compound contains 1.266 g of carbon, which is equivalent to 1.266/12.01 = 0.105 mol of carbon atoms. It also contains 5.462 g of lead, which is equivalent to 5.462/207.2 = 0.026 mol of lead atoms. The compound also contains 1.687 g of oxygen, which is equivalent to 1.687/16.00 = 0.105 mol of oxygen atoms, and 0.160 g of hydrogen, which is equivalent to 0.160/1.01 = 0.158 mol of hydrogen atoms.
The molecular formula for the compound is therefore Pb(C2H2O2). However, it is also mentioned that the compound is hydrated, which means that it contains water. The 1.425 g of water present in the compound is equivalent to 1.425/18.02 = 0.079 mol of water molecules. The compound 1 likely Pb(C2H2O2)·xH2O, where x represents the number of water molecules present in the compound.
Related Questions
The reaction below shows the combustion of propane (C3H8). Why is the mole ratio (3 moles CO2/1 mol C3H8) used to determine the amount of carbon dioxide (CO2) produced when propane (C3H8) combusts in excess oxygen? (1 point) C3H8 + O2 yields CO2 + H2O + heat Propane has a mass that is 3 times greater than that of CO2, so only 1 mole of C3H8 is needed to produce 3 moles of CO2. When the chemical equation for propane combustion is balanced, 1 mole of C3H8 is needed to produce 3 moles of CO2. During combustion, CO2 is approximately 3 times more reactive than C3H8, so less C3H8 will participate in the reaction. Carbon dioxide has a volume of about one-third that of C3H8, so 3 moles of CO2 are needed to react with each mole of C3H8.
Answers
One mole of the propane produces three moles of the carbon dioxide from mole ratio.
What is the mole ratio?When we talk about the mole ratio, we mean the ratio of the species that can be found in the reaction. We can be able to get the mole ratio from the balanced reaction equation and we apply it to solve problems from the stoichiometry of the reaction.
Given the fact that we have the reaction as it has been written in the question, it is clear that we would need about one mole of the propane to produce three moles of carbon dioxide.
We can see that there are three atoms of carbon in the propane and the implication of this is that we are going to produce three atoms of carbon dioxide in the product.
Learn more about mole ratio:https://brainly.com/question/15288923
#SPJ1
in this task, you’ll observe a chemical reaction between baking soda and vinegar. How do you think the temperature of the reactants and the rate of reaction are related? Write a hypothesis to predict the relationship between the two parameters.
Answers
The temperature of both the reactants and the pace of reaction are correlated in the chemical reaction of baking soda and vinegar the warmth of the reactants causes a raise in the rate of action and vice versa.
Which is a chemical reaction *?When two or more compounds come into touch with one another and create a new substance, the process is known as a chemical reaction (s). Reactants or reagents are the name(s) for the substance(s) or substances that are initially incorporated into the chemical process.
What's the most important chemical reactions?A few synthesis processes can produce several products. One of the more significant chemical processes on Earth is photosynthesis. It enables some microorganisms and plants to transform carbon dioxide gas and water into storable glucose and oxygen. For life to exist on Earth, we need this oxygen.
To know more about Chemical reaction visit:
https://brainly.com/question/29762834
#SPJ1
help me i need it asap
Which example is a biotic factor of an aquarium ecosystem?
plastic plants placed in the gravel
algae growing on the glass
rock structure
gravel on the bottom of the aquarium
Which examples are an abiotic factor of an aquarium ecosystem? Select all that apply.
rock structure
temperature of the water
amount of algae on the glass
number of fish
Which example describes an abiotic factor interacting with a biotic factor?
The temperature of the air affecting the wind direction
Water eroding a rock
Cows eating nearby grass
The amount of sunlight affecting the growth of a plant.
Students in Ms. Brown's class are making observations in the garden outside of the school. They make a list of all the abiotic and biotic factors in their notebook. Part of the list is below:
Gravel
Grass
Butterfly
Sunflower
Bird feeder
Flowerpots
Which items on the list are a part of the garden ecosystem?
Grass, butterfly, sunflower
None of the listed items are a part of the ecosystem
All the listed items are part of the ecosystem
Gravel, bird feeder, flowerpots
Answers
The biotic factor of an aquarium ecosystem is algae growing on the glass.
The abiotic factors of an aquarium ecosystem are rock structure, temperature of the water, and amount of sunlight.
The example that describes an abiotic factor interacting with a biotic factor is the amount of sunlight affecting the growth of a plant.
All the listed items in Ms. Brown's class, including gravel, grass, butterfly, sunflower, bird feeder, and flowerpots, are a part of the garden ecosystem.
What is an ecosystem?An ecosystem is a community of living organisms (biotic factors) interacting with each other and with their physical environment (abiotic factors) in a specific area. It includes all the living and non-living components of the environment that interact with each other. Examples of ecosystems include a coral reef, a forest, a desert, and even an aquarium or a garden. Ecosystems can be large or small and can be found on land or in water. They are essential for the survival of living organisms as they provide food, shelter, and other resources necessary for life.
Read more on ecosystem here:https://brainly.com/question/842527
#SPJ1
What's the lewis structure of NO3- and O3?
I end up finding the apparently wrong ones for both, and am probably missing out on an important notion.
Answers
The lewis structure of NO₃⁻ is trigonal planar and the Lewis structure of ozone (O₃) has a resonance form.
What are Lewis structures?Lewis structures which are also often referred to as Lewis dot formulas, Lewis dot structures, electron dot structures, or Lewis electron dot structures, depict the interactions between the atoms in a molecule as well as any lone pairs of electrons that may be present.
NO₃⁻ has a trigonal planar Lewis structure. It has one nitrogen atom, three oxygen atoms, and covalent bonds holding the three oxygen atoms together. The sp² hybridization of the nitrogen atom gives NO₃⁻- its trigonal planar structure.
Three oxygen atoms make up the oxygen allotrope known as ozone (O₃). One double bond and one single bond make up the Lewis structure of ozone. Additionally, two oxygen atoms in the Lewis structure of O3 carry charges.
Learn more about Lewis structures at: https://brainly.com/question/20300458
#SPJ1
No Constant Variable
A 2.00L sample of gas at STP is heated to 500K and compressed to 200 kPa. What is
the new volume of the gas?
I’ll give you all my points
Answers
The new volume of the gas will be 1.85L.
The three gas laws are what?According to Boyle's Law, as pressure lowers, gas volume grows. According to Charles' Law, when the temperature rises, the volume of the gas also rises. Avogadro's Law also states that as the amount of gas increases, so does the volume of the gas.
Given, initial volume of gas V1 = 2L
initial temp T1 = 273K
initial pressure P1 = 101.3 kPa
final temperature, T2 = 500K
Final pressure, P2 = 200 kPa
let final or new volume be V,
now for a constant moles of gas,
by using ideal gas equation,
P1×V1/T1 = P2×V/T2
101.3×2/273 = 200×V/500
202.6/273 = 2V/5
V = 0.742×5/2
V = 1.85 L
The new volume of the gas will be 1.85L.
To know more about Gas laws visit
https://brainly.com/question/12669509
#SPJ1
For the reaction C + 2H2 → CH4, how many grams of carbon are required to produce 14 moles of methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element Molar Mass
Hydrogen 1
Carbon 12
Answers
The amount, in grams, of carbon required to produce 14 moles of methane according to the reaction would be 168.0 grams.
Stoichiometric problemFrom the balanced equation of the reaction, the mole ratio of the carbon that reacts and the methane produced is 1:1. In other words, 1 mole of carbon will produce 1 mole of methane.
Thus, for the production of 14 moles of methane:
1 mole methane = 1 mole carbon
14 moles methane = 14 x 1/1 = 14 moles carbon.
Recall that, mass = mole x molar mass.
The molar weight of carbon is given as 12 g/mol
Mass of 14 moles carbon = 14 x 12 = 168 grams
In other words, for the illustrated reaction, the amount of carbon required to produce 14 moles of methane would be 168.0 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/29775083
#SPJ1
_____ molecules are always synthetic.
Answers
A synthetic ingredient is a substance that has been synthesized in a lab using different chemical procedures. Its goal is to mimic a natural chemical to duplicate its structure and, consequently, its fragrance.
What is synthetic ingredient?In most cases, it refers to a naturally occurring substance, like hyaluronic acid, which was formerly extracted from animals and has now been molecularly copied in a laboratory to provide the same results. Not everything that is manufactured or chemical is inherently harmful to you. Although not all synthetic cosmetic components are the same, some have been proven to be toxic, accumulate in the body over time, and have been associated with cancer as well as irritations of the skin and mucous membranes.
To know more about synthetic ingridient, check out:
https://brainly.com/question/29774084
#SPJ1
C(s) + O2(g) → CO2(g) ΔHº = -94.6 kJ
H2(g) + \scriptsize \frac{1}{2}O2(g) → H2O(l) ΔHº = -286.0 kJ
2C2H2(g) + 5O2(g) → 4CO2(g) + 2H2O (l) ΔHº = -2598.8 kJ
calculate the value of ΔHº for the final reaction:
2C(s) + H2(g) → C2H2(g) ΔHº = kJ
Answers
The value of enthalpy(ΔHº) for the final reaction (2C(s) + H₂(g) → C₂H₂(g) ) is -1932.8KJ.
Enthalpy change: what is it?A system's enthalpy is its heat capacity. A reaction's enthalpy change is roughly equivalent to how much energy is lost or gained throughout the reaction. If the enthalpy of the system decreases over the reaction, the reaction is preferred.
C(s) + O₂(g) → CO₂(g) ΔHº = -94.6 kJ --- (1)
H₂(g) + O₂(g) → H₂O(l) ΔHº = -286.0 kJ ---(2)
2C₂H₂(g) + 5O₂(g) → 4CO₂(g) + 2H₂O (l) ΔHº = -2598.8 kJ ---(3)
The value of ΔHº for the final reaction,
2C(s) + H₂(g) → C₂H₂(g)
ΔH₄° = 2× ΔH₂º + ΔH₃º - ΔH₁º
ΔH₄° = 2× -286.0 + ( -2598.8) - (- 94.6)
ΔH₄° = 2× -286.0 -2598.8 + 94.6
ΔH₄° = 666 - 2598.8
ΔH₄° = -1932.8KJ.
To know more about enthalpy visit:
https://brainly.com/question/13979547
#SPJ1
Map of structure of an Atom?
Answers
Atoms are made up of a very tiny, positively charged nucleus that is encircled by a sea of negatively charged electrons. Despite often being less than a tenth of an atom's size, the nucleus makes up more than 99.9% of the atom's mass.
What is the structure of an Atom?The term "atomic structure" describes the structure of an atom, which has a nucleus (centre) that contains both protons (positively charged) and neutrons (neutral). The centre of the nucleus is circled by the negatively charged electrons.
Positively charged protons, negatively charged electrons, and neutral neutrons make up the three types of subatomic particles that make up an atom. Nearly equal in mass, protons and neutrons are found in the dense nucleus of the atom.
Thus, Atoms are made up of a very tiny, positively charged nucleus that is encircled by a sea of negatively charged electrons.
To learn more about an atom, follow the link;
https://brainly.com/question/29695801
#SPJ1
How many grams are in 4.2 × 10²² atoms of iron?
Answers
Answer:0.226 gram
Explanation:you can get the answer in two steps calculate 3.40 . 10^22 atoms =
Answer:
4.2 × 10²² ÷ 6.022× 10²³
4.2 × 10²² equals 0.069 moles (approx)
weight of 1 mole of iron = 56g
therefore, 0.069 moles = 56 × 0.069 = 3.9 g
Sorry for lazy work.. :P
A scientist did a test to compare two substances: substance Q and substance R. At room temperature, both substances are liquid. When the scientist transferred the same amount of energy out of both substances, only one substance changed phase while the other did not. Which substance changed phase, and how did it change?
Responses
a
Substance Q changed phase because the attraction of the molecules was able to overcome their slower movement. Its molecules now move in place.
Substance Q changed phase because the attraction of the molecules was able to overcome their slower movement. Its molecules now move in place.
b
Substance Q changed phase because the strong attraction between molecules made their movement slower. Its molecules now move in place.
Substance Q changed phase because the strong attraction between molecules made their movement slower. Its molecules now move in place.
c
Substance R changed phase because the weak attraction between molecules let them move faster. Its molecules now move around each other.
Substance R changed phase because the weak attraction between molecules let them move faster. Its molecules now move around each other.
d
Substance R changed phase because the attraction was able to overcome the slower molecules. Its molecules now move away from each other.
Substance R changed phase because the attraction was able to overcome the slower molecules. Its molecules now move away from each other.
Answers
Substance R changed phase because the weak attraction between molecules let them move faster. Option C
What is phase change?We know that a change of phase has to do with the movement of a material from a given state of matter to the other. Net us note that when there is a change of state, we are going to notice that the force of attraction in the molecule would also change.
Since we know that the substance that we have are liquid at room temperature, we know that the supply of some energy may cause to be bale to change its phase.
Learn more about phase change:https://brainly.com/question/12390797
#SPJ1
Calculate the osmotic pressure of 5 % glucose solution and the osmotic pressure of 0.2 %, 0.9 % and 10 % sodium chloride solutions on the base of Van’t Hoff’s law (d = 1.1 g/ml for 10 % NaCl).
Answers
Based on Van't Hoff's law, the osmotic pressure of 5% glucose solution with 0.2%, 0.9%, and 10% sodium chloride solutions is 0821 liter atm K1mol1).
What is the osmotic pressure Van t Hoff law?Boyle, Van't Hoff The rule of solution: In a delute solution, the osmotic pressure () is directly proportional to the molar concentration (C) or inversely proportional to the volume (V) of the solution at constant temperature. Reason: C but C = Vn.
What does class 12 osmotic pressure formula mean?Pi=iMRT is the formula for osmotic pressure. The osmotic pressure increases with a solution's concentration (M) or temperature (T).
To know more about osmotic pressure visit:-
https://brainly.com/question/29819107
#SPJ1
Are all antigens foreign substances?
Answers
No, not all antigens are foreign substances.
An antigen is any substance that can trigger an immune response, including the production of antibodies. Some antigens are naturally present in the body and are called "self" antigens which are usually not harmful, but in some cases, the immune system can mistakenly recognize them as foreign and attack them which can lead to autoimmune diseases.
Antigens bind together with antibodies and promote the elimination of harmful pathogens present in the body. They alert other parts of the immune system to take over which helps to neutralize the threat from pathogens.
To learn more about antigen:
brainly.com/question/15694610
Which of the following best represents the structure of an amino acid in basic solution (pH = 11)?
Answers
Answer:
Explanation:
In basic solution (pH = 11), an amino acid typically exists in its zwitterionic form. This means that the amino acid has both a positive and a negative charge, due to the presence of both a basic amino group (-NH2) and an acidic carboxyl group (-COOH).
The structure of an amino acid in basic solution (pH = 11) can be represented as follows:
The central carbon atom (also known as the alpha carbon) is bonded to a hydrogen atom, an amino group (-NH2), a carboxyl group (-COOH), and a side chain R group.
The amino group is positively charged due to the loss of a proton (H+).
The carboxyl group is negatively charged due to the gain of a proton (H+).
Overall, the amino acid has a net charge of zero, due to the equal and opposite charges of the amino and carboxyl groups. This is known as the zwitterionic form of the amino acid.
Here is a visual representation of the structure of an amino acid in basic solution (pH = 11):
H |
N-C-COOH
|
R
Regenerate response
Why atoms form compounds
Answers
Answer:
Because the atoms are trying to reach the most stable ( lowest energy ) state they can.
Please show all of your work, I need to understand all steps:
A student collected time (t) and concentration ([A]) data at
295 K for the reaction 2A→B. These time and concentration data are shown in the table to the right. The student then plotted graphs of [A] versus t (Figure 1) , ln[A] versus t (Figure 2) , and 1/[A] versus t (Figure 3) .
Figure 1:
t (s) (A)(M) ln(A) 1/ (A)
0.00 0.500 −0.693 2.00
20.0 0.389 −0.944 2.57
40.0 0.303 −1.19 3.30
60.0 0.236 −1.44 4.24
80.0 0.184 −1.69 5.43
i.) What is the rate of the reaction?
ii.) What is the value of the rate constant for this reaction?
iii.)
Next, the student ran the same reaction at a different temperature and measured a different reaction rate, with the following results:
T(K) k(s-1)
295 0.0125
325 0.0357
What is the activation energy of this reaction?
Express your answer to three significant figures and include the appropriate units.
Answers
Answer:
a because the x and y value is the same
When air moves in small circular patterns, it moves within a
Answers
Answer:
Convection
Explanation:
If 467.08 grams of Oz are reacted, how many grams of C6H5CH3 will also be reacted?
Answers
In order to react with 467.08 grams of O2, 4034.95 g of toluene (C6H5CH3) is required.
What are some uses for toluene?Toluene is a white liquid hydrocarbon found in petroleum and coal tar that is employed like a solvent and in the synthesis of organic compounds. Toluene is a naturally occurring substance found in crude oil and is used for oil refining as well as the production of glues, lacquers, paints, and explosives. Toluene can be discovered in household products like paint, paintbrush cleaner, nail polish, glue, inks, and stain removers.
For the balanced equation
2C6H5CH3 + 3O2 → 7CO2 + 4H2O
We required three steps
1.) Convert mass of O2 to mol of O2
mole = mass / molar mass
2.) Find mole of C6H5CH3 by multiply mol O2 by the mol ratio between O2 and C6H5CH3 in balanced equation.
3.) Find mass C6H5CH3 by multiply mol C6H5CH3 by its molar mass (92.14 g/mol)
= 467.08 gm /15.999 gm × 3/ 2 ×92.14 gm
= 4034.95 gm. of C6H5CH3
To know more about Toluene visit :
https://brainly.com/question/6181289
#SPJ1
What is the molecular weight of (NH4)2SO4
Answers
The molecular weight of [tex](NH_4)_2SO_4[/tex] would be 132 g/mol.
Calculation of molecular weightsThe molecular weight, otherwise known as the molar mass of substances is the sum of the molar weights of individual atoms that make up the substance.
[tex](NH_4)_2SO_4[/tex] is made up of 2 atoms of N, 8 atoms of H, 1 atom of S, and 4 atoms of O.
Molar weight of N is 14 g/molMolar weight of H is 1 g/molMolar weight of S is 32 g/molMolar weight of O is 16 g/molThus, the molecular weight of [tex](NH_4)_2SO_4[/tex] = (14x2) + (1x8) + 32 + (16x4)
= 132 g/mol
In other words, the molecular weight of [tex](NH_4)_2SO_4[/tex] is 132 g/mol.
More on molecular weights can be found here: https://brainly.com/question/14507491
#SPJ1
8. Jill conducted an experiment to investigate which plant food would make her
plants grow faster. She tried four different plant foods on plants of the same
type and age. Jill concluded that the plant that was fed Brand A grew the
fastest. Jill did not realize that the plant that was fed Brand A also received
more sunlight. (SC.7.N.1.5.3)
What error did Jill make in her experiment?
a) She used the wrong kind of plant.
b) She used too much plant food.
c) She did not control the variables.
Answers
In her experiment, Jill did not take into account the fact that the plant that was fed Brand A also received more sunlight. This means that there is another variable, besides the plant food, that could have affected the growth rate of the plant. By not controlling this variable, Jill's conclusion that Brand A was the best plant food may not be accurate. To properly control variables and make a valid conclusion, Jill should have ensured that all plants received the same amount of sunlight, or use other methods to control this variable as well.
I need help with how to do question c, d, and e
Answers
The answer of the following question of concentration are:
c) The law expression for this reaction is k[A].
d) The value of k including its units is on the specific reaction.
e) The half-life of the reaction is T1/2 = 0.693/k.
What is concentration?
Concentration in chemistry is a measure of the amount of a substance that is present in a given volume. It is usually expressed in terms of mass, moles, or volume.
c) The law expression for this reaction is rate = k[A], where k is the rate constant. This is because in a first-order reaction, the rate of reaction is proportional to the concentration of the reactant.
d) The value of k depends on the specific reaction, and can be determined by measuring the reaction rate at different concentrations of A and plotting a graph of rate versus concentration of A.
e) The half-life of a first-order reaction is given by T1/2 = 0.693/k, where T1/2 is the half-life and k is the rate constant. The units of the half-life are seconds.
To learn more about concentration
https://brainly.com/question/26255204
#SPJ1
What is the number of chloride ions (Cl-) in 250 mL of a 0.2M magnesium chloride solution?
a. 0.1 mol c. 0.62 mol
b. 0.16 mol d. 1.6 mol
Answers
According to molar concentration and mole concept, there are 0.1 mole of chloride ions in 250 mL of a 0.2 M magnesium chloride solution.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.
By substituting values in given formula, number of moles=0.2×0.250=0.05 moles .Now this values is subtracted from molar mass of magnesium chloride that is 95.211-0.05=95.161 moles which is finally divided by 95.211=0.999 which is approximately 0.10 mole.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ1
Balance the following Equation (do not leave any empty blanks, you must enter 1 if the value is 1):
___ Na2S + ___ HCl --> ___ NaCl + ___ H2S
(Refer to image)
What type of reaction is it?
(Question one is a _______ type of reaction.)
Answers
Answer: this looks hard
Explanation:
Answer:
1 Na2S + 2 HCl ===> 2 NaCl + 1 H2S
In these reactions, two compounds exchange ions to form two new compounds.
Explanation:
--- Na2S + ---- HCl ===> ---- NaCl + ---- H2S
Na = 2 Na = 1 * 2 = 2
S = 1 S = 1
H = 1 * 2 = 2 H = 2
Cl = 1 * 2 = 2 Cl = 1 * 2 = Cl
In these reactions, two compounds exchange ions to form two new compounds.
REACTION TYPE:
DOUBLE DISPLACEMENT REACTION/DOUBLE REPLACEMENT
I hope that helps, have a wonderful day!!!!
Which of these is an example of a physical property?
A. Iron combines with oxygen to rust.
B. Potassium reacts in water to form a base.
C. Sodium metal is soft and malleable.
D. Sodium ignites when placed in water.
Answers
Option C. Sodium metal is soft and malleable is an example of a physical property.
What is a physical property?A physical property can be defined as any feature of a substance that can be really observed and also measured without changing its chemical composition such as for example, the color, density of a metal, boiling point, conductivity, etc.
Therefore, with this data, we can see that physical properties have a significant impact on the performance and use of a given chemical product and they are associated with intrinsic features of the chemical material that forms molecules.
Learn more about physical properties here:
https://brainly.com/question/12330204
#SPJ1
ammonia chemically reacts with oxygen gas to produce nitric oxide and water. what mass of oxygen gas is consumed by the reaction of 8.4 g of ammonia?
Answers
the mass of nitric oxide produced by the reaction of 8.4 g of oxygen gas is 4.32 g. ammonia chemically reacts with oxygen gas to produce nitric oxide and water.
What oxygen is used for?Common uses of oxygen include production of steel, plastics and textiles, brazing, welding and cutting of steels and other metals, rocket propellant, oxygen therapy, and life support systems in aircraft, submarines, spaceflight and diving.
Why is oxygen important?Oxygen helps organisms grow, reproduce, and turn food into energy. Humans get the oxygen they need by breathing through their nose and mouth into their lungs. Oxygen gives our cells the ability to break down food in order to get the energy we need to survive.
To know more about oxygen visit
https://brainly.com/question/13370320#SPJ1
Balancing chemical reactions. What is it and examples
Answers
Answer: A balanced chemical reaction is A balanced chemical equation where the number of atoms of each type in the response is the same on both reactants and product sides.
Explanation: Burning, and cooking are 2 examples.
Imagine that you are a scientist working in a very dry desert environment. This location has been experiencing a terrible drought, so there has been very little rainfall over the last few years. The drought is affecting the local farms, especially the farms that grow corn. You are asked to help choose a variety of corn that will grow the best in these drought conditions.
Which of the four varieties of corn that you tested in the lab would you choose?
Sunburst Variety
Golden Kernel Variety
Chok Full 'O Goodness Variety
Cob-o-Rama Variety
Why do you think this variety is the best choice?
Answers
Based on the information provided, I would recommend the Sunburst Variety of corn as the best choice for growing in the drought conditions of the desert environment.
What is the corn about?Sunburst Variety of corn has been specifically developed to be drought-tolerant, meaning that it can survive and produce a good yield even with minimal rainfall.
Therefore, I would recommend the Sunburst variety of corn as the best choice for growing in the desert environment due to its drought-tolerance, deep root system, heat tolerance, high yield, and good quality grain.
Learn more about corn from
https://brainly.com/question/397421
#SPJ1
PLEASE HELP! 80 POINTS
Create a VESPR drawing for
NH3
CH20
N3
SO2CI2
BrF5
Answers
Answer:
hope it helps you
determine the amount of time it takes for 3/4 of a radioactive sample of an isotope of bromine to decay. The half-life of the isotope is 16.5 hours.
Answers
Based on the given half-life, the amount of time it takes for 3/4 of a radioactive sample of an isotope of bromine to decay is 33 hours.
What is the half-life of a radioactive isotope?The time needed for a quantity to decrease to half of its initial value is known as the half-life. In nuclear physics, the phrase is frequently used to indicate how rapidly unstable atoms decay radioactively or how long stable atoms last.
Any substance that contains unstable atoms that release ionizing radiation during their natural decay is considered radioactive material.
Given the half-life of the radioactive sample of an isotope of bromine to be 16.5 hours. The amount of time it takes for 3/4 of a radioactive sample of an isotope of bromine to decay is calculated as follows:
After one half-life, half of the sample remains, and half decays
After two half-lives, 1/4 of the sample remains, and 3/4 decays
The time for two half-lives = 16.5 hours * 2
The time for two half-lives = 33 hours.
Learn more about half-lives at: https://brainly.com/question/1160651
#SPJ1
Compared to a human, what is similar about how blue whales get molecules from food and air?
Answers
Answer: Blue whales, like humans, obtain molecules from food and air through a process of digestion and respiration. During digestion, molecules in food are broken down and absorbed into the bloodstream, while during respiration, oxygen molecules in the air are absorbed into the bloodstream. Both processes enable blue whales to obtain the necessary molecules for energy, growth, and development.