How/what do I answer this?--> "heat of the chemical reactions"
like this is the question :/

Answer:

4.78 mol O2

Explanation:

Grams --> moles

Grams/molar mass = moles

153 g O2 / 32 g/mol O2 = 4.78125 (significant figures so round it up; the grams has 3 significant figures, so round it up) 4.78 mol O2

Answer:

65.38 u

Explanation:

hope this helps you out!!!!!!!

They Mean D and not U H just took the test and its D i hope this help

Answer: The concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.

Explanation:

The ratio of concentration of products and reactants raised to the power of their coefficients is called equilibrium constant. The symbol used to denote equilibrium constant is [tex]K_{eq}[/tex].

As the given reaction equation is as follows.

[tex]2NO_{2}(g) \rightleftharpoons N_{2}O_{4}(g)[/tex]

The expression for equilibrium constant of this reaction is as follows.

[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}[/tex]

Now, substitute the given values into above formula as follows.

[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}\\67.3 = \frac{(0.2)}{[NO_{2}]^{2}}\\So, [NO] = \sqrt{\frac{0.2}{67.3}}\\= 0.0545 M[/tex]

Thus, we can conclude that the concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.

Answer:

The appropriate solution is:

(a) n ≈ 900

(b) n ≈ 1165

Explanation:

According to the question,

(a)

The final number of molecules throughout water will be:

= [tex](\frac{1000}{1000}\times 4\times 10 )^n[/tex]

where, n = number of extractions

Now,

The initial number of molecules will be:

= [tex]1.06\times 10^{-4}\times 6.023\times 10^{23}[/tex]

= [tex]6.387\times 10^{19}[/tex]

Final number of molecule,

⇒ [tex]1.566\times 10^{-16}=(\frac{1000}{1040} )^n[/tex]

                       [tex]n \approx 900[/tex]

(b)

Final molecules of X = left (0.01%)

hence,

⇒ [tex]initial = 6.384\times 10^{19}[/tex]

   [tex]\frac{1}{6.384\times 10^{19}} =(\frac{1000}{1040} )^2[/tex]

                 [tex]n \approx 1165[/tex]

Answer:

c

Explanation:

[tex] \huge \mathrm{ \underline{Answer} ࿐}[/tex]

The correct option is B.

A Catalyst is a chemical which promotes or speed up a chemical reaction without undergoing any chemical reaction itself.

for example : potassium permanganate - Hydrogen peroxide will decompose into water and oxygen gas in the presence of KMnO4.

_____________________________

[tex]\mathrm{ \#TeeNForeveR}[/tex]

Answer: 61 μg of aluminum phosphate in grams is equal to [tex]61 \times 10^{-6} g[/tex].

Explanation:

According to standard conversion of units, 1 microgram [tex](\mu g)[/tex] is equal to [tex]1 \times 10^{-6}[/tex] g.

Therefore, [tex]61 \mu g[/tex] is converted into grams as follows.

[tex]1 \mu g = 10^{-6} g\\61 \mu g = 61 \mu g \times \frac{10^{-6}}{1 g}\\= 61 \times 10^{-6} g[/tex]

Thus, we can conclude that 61 μg of aluminum phosphate in grams is equal to [tex]61 \times 10^{-6} g[/tex].

A dry cell is one type of electric battery which is generally used for the home and portable electronic devices. A battery is a device which consists of one or more electrochemical cells. The site of oxidation occurs in solid zinc layer. The correct option is A.

A dry cell is defined as an electrochemical cell which consists of low moisture immobilized electrolytes in the form of a paste which restricts it from flowing. It is developed by the German scientist Carl Gassner which converts chemical energy into electrical energy.

A dry cell consists of a metal container in which a low moisture electrolyte paste covers the graphite rod or a metal electrode. Generally, the metal container will be zinc whose base perform as the negative electrode (anode).

For a dry cell battery to operate, oxidation  will occur from the zinc anode and reduction will take place in the cathode.

Thus the correct option is A.

To know more about dry cell, visit;

https://brainly.com/question/13780178

#SPJ2

Answer:

p o e t i c o

Explanation:

no lo entenderias

Answer:

hot water is thinner than cold water.

Explanation:

The rate of diffusion of a substance has a lot to do with the temperature of a body.

Let us take water for instance, cold water has a greater density than hot water. As a result of this, the molecules in cold water are slower when in motion and more sluggish.

On the other hand, the molecules of hot water are quite faster since hot water has a lower density(thinner than cold water).

Thus, an  increase in temperature will cause an increase in diffusion rate because hot water is thinner than cold water.

Answer:

190 L

Explanation:

Given that:

Number of moles = mass/molar mass

number of moles = 5.64

molar mass of aluminum chloride = 133.34 g/mol

∴

The balanced equation is:

2 Al + 3 Cl2 --> 2AlCl3.

From above reaction:

5.64 mole of  AlCl3 reacts with 3 mole Cl2  to give 2 mole AlCl3

i.e

[tex](5.64 \ mole \ AlCl3) \times (3 \ mole \ Cl2 \ / \ 2 \ mole \ AlCl3)[/tex]

= 8.46 mole Cl2 gas.

At Standard temperature and pressure:

= (22.4 L/1 mole gas) * (8.46 mole Cl2)

= 190 L chlorine gas

Answer:

moles MgCl₂ = 5.97 moles

Explanation:

First, let0s write the overall reaction that is taking place here:

Mg(OH)₂ + HCl ----------> MgCl₂ + H₂O

Now, we need to balance this reaction:

Mg(OH)₂ + 2HCl ----------> MgCl₂ + 2H₂O

Now, the exercise already stated that the HCl is in excess, so we can assume the magnesium hydroxide is the limiting reactant. If this is true, then, to get the moles of MgCl₂ produced, all we need to do is calculate the moles of Mg(OH)₂ that reacted, using the following expression:

moles = mass / MM

The atomic weights for Mg, O and H are:

Mg: 24.305 g/mol;  H: 1 g/mol;  O = 15.999 g/mol

Let's determine the molar mass of Mg(OH)₂:

MM = 24.305 + (2 * 15.999) + (2 * 1) = 58.303 g/mol

Now, let's determine the moles:

moles = 348 g / 58.303 g/mol = 5.97 moles of Mg(OH)₂

As we can see in the overall reaction, there is a mole ration between Mg(OH)₂ and MgCl₂ of 1:1, that's why we can conclude that the moles of Mg(OH)₂ would be the same moles of MgCl₂:

Hope this helps

Answer:ee

Explanation:

Answer:

Explanation:

Answer:

- log{H+ }= - log {5}= -0.6990

Answer:

I'm not really sure but I thinks its

A:veuns

[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:⌐■-■}}}}}[/tex]

Definition:-

The organ of government that primarily looks after the function of implementation and administration is called the executive.

Function:-

Executive is the branch of government responsible for the implementation of laws and policies adopted by the legislature.

Answer:

ako po kailangan ko po nga ayuda

Explanation:

thanks for the points ❤️

Answer:

A

Explanation:

got from another website

The simulation which is least suitable to scientists for solving a problem is when performing an experiment that would be too costly or dangerous to conduct in the real world.

Scientific approach is an empirical method of acquiring knowledge and result. This method involved the careful observation of the problem, applying skepticism about the problem and giving cognitive assumptions also.

If a scientist wants to investigate several problems, then they will perform a large no. of trials at regular intervals to get the required result. But if performing of any experiment is dangerous to conduct in the real world then scientists will ignore to solve that problem.

Hence, option (C) is correct.

To know more about scientific approach, visit the below ink:

https://brainly.com/question/497944

Answer:

four

is the answer

Answer:

Taxonomy

Explanation:

Answer: There are [tex]145 \times 10^{23}[/tex] atoms in 24 moles of Fe.

Explanation:

According to the mole concept, 1 mole of a substance contains [tex]6.022 \times 10^{23}[/tex] atoms.

Therefore, atoms present in 24 moles of Fe are calculated as follows.

[tex]24 mol \times 6.022 \times 10^{23} atoms/mol\\= 144.52 \times 10^{23} atoms\\or, 145 \times 10^{23} atoms[/tex]

Thus, we can conclude that there are [tex]145 \times 10^{23}[/tex] atoms in 24 moles of Fe.

When leaves fall from a tree and decompose on the soil it benefits the ecosystem as nutrients are released into the soil.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/1673533

#SPJ6

Answer:

Ag(I)C2H3O2 ....................

Silver only has a single valence value (+1) so you really don't need to put the (I) in the chemical formula.

Answer:

2.82 g

Explanation:

Step 1: Write the balanced precipitation reaction

3 Ba(NO₃)₂ (aq) + Al₂(SO₄)₃ (aq) ⇒ 3 BaSO₄(s) + 2 Al(NO₃)₃(aq)

Step 2: Calculate the reacting moles of Ba(NO₃)₂

45.0 mL (0.0450 L) of 0.548 M Ba(NO₃)₂ react.

0.0450 L × 0.548 mol/L = 0.0247 mol

Step 3: Calculate the moles of Al₂(SO₄)₃ that react with 0.0247 moles of Ba(NO₃)₂

The molar ratio of Ba(NO₃)₂ to Al₂(SO₄)₃ is 3:1. The reacting moles of Al₂(SO₄)₃ are 1/3 × 0.0247 mol = 8.23 × 10⁻³ mol

Step 4: Calculate the mass corresponding to 8.23 × 10⁻³ moles of Al₂(SO₄)₃

The molar mass of Al₂(SO₄)₃ is 342.2 g/mol.

8.23 × 10⁻³ mol × 342.2 g/mol = 2.82 g

Answer:

I'd there and pictures?? can put the list

Answer:

The right answer is "[tex][Na^+]=5.57 \ ppm[/tex]".

Explanation:

The given values are:

[tex]\frac{A_s}{A_{coffee}} =\frac{0.840}{1.000}[/tex]

According to the question,

The concentration of standard will be:

=  [tex]\frac{7.80}{50.00}\times 4.80[/tex]

=  [tex]0.156\times 4.80[/tex]

=  [tex]0.748 \ ppm[/tex]

Coffee after dilution,

⇒  [tex]\frac{A_{coffee}}{C_{coffee}} =F\times \frac{A_s}{C_s}[/tex]

or,

⇒  [tex]C_{coffee}=\frac{A_{coffee}}{A_s}\times \frac{C_s}{F}[/tex]

On substituting the values, we get

⇒               [tex]=\frac{1.000}{0.840}\times \frac{0.748}{1.68}[/tex]

⇒               [tex]=1.191\times 1.3104[/tex]

⇒               [tex]=1.561 \ ppm[/tex]

hence,

In unknown sample, the concentration of coffee will be:

=  [tex]1.561\times \frac{50}{14}[/tex]

=  [tex]\frac{78.05}{14}[/tex]

=  [tex]5.57 \ ppm[/tex]