To make a syrup containing 80% w/v of sucrose, a specific amount of a syrup containing 85% w/v of sucrose should be mixed with 150 ml of a syrup containing 60% w/v of sucrose.
Let's assume that x milliliters of the 85% w/v sucrose syrup should be mixed with the 150 ml of the 60% w/v sucrose syrup to obtain the desired 80% w/v sucrose syrup. To determine the amount of sucrose in the final mixture, we need to consider the sucrose content in each syrup. The 85% w/v syrup contains 85 grams of sucrose in 100 ml, so x milliliters of this syrup will contain (85/100) * x grams of sucrose.
Similarly, the 60% w/v syrup contains 60 grams of sucrose in 100 ml, so 150 ml of this syrup will contain (60/100) * 150 grams of sucrose. To find the total amount of sucrose in the mixture, we add the amount of sucrose from each syrup:
(85/100) * x + (60/100) * 150 = (80/100) * (x + 150)
Simplifying this equation allows us to solve for x, which represents the number of milliliters of the 85% w/v sucrose syrup needed to achieve the desired concentration.
Learn more about sucrose here: https://brainly.com/question/477537
#SPJ11
Based on the reduction potential data, What is the standard cell potential for the following electrochemical cell reaction: Zn(s) + Cu^2+(aq) Zn^2+(aq) + Cu(s)? E degree red = -0.763 V for Zn^2+ (aq) + 2e^- Zn(s) E degree red = +0.340 V for Cu^2+(aq) + 2e^- Cu(s). a. -0.423 V b. +1.10 V c. +0.423 V
Based on the reduction potential data, the standard cell potential for the electrochemical cell reaction is +1.10 V. The correct answer is B.
The standard cell potential is the difference between the standard reduction potentials of the two half-reactions. In this case, the half-reactions are:
Zn(s) + 2e- -> Zn²⁺(aq) E° red = -0.763 V
Cu²⁺(aq) + 2e- -> Cu(s) E° red = +0.340 V
The standard cell potential is therefore:
E° cell = E° red (cathode) - E° red (anode)
E° cell = +0.340 V - (-0.763 V)
E° cell = +1.10 V
Therefore, the correct option is B, +1.10 V.
To know more about standard cell potential, refer here:
https://brainly.com/question/29797132#
#SPJ11
la) Determine the upper and lower bounds for an Al2O3 particle - Al matrix composite E(Al)-69 GPa, E(AlbO3)-380 GPa, Volume fraction(Al)-0.40 (1b) Calculate the upper bound for the specific stiffness of this composite. p(Al)-2.71 g/cm3, pAbO3 3.98 g/cm3
The upper bound for the specific stiffness of this composite is 25.36 x 10^6 N/m3.
Upper and lower bounds for an Al2O3 particle - Al matrix composite E(Al)-69 GPa, E(AlbO3)-380 GPa, Volume fraction(Al)-0.40The rule of mixtures is a tool that is used to estimate the properties of composites. This rule is based on the following equation:Em=E1V1+E2V2Where, E is the modulus of elasticity, V is the volume fraction, and the subscripts 1 and 2 denote the individual phases. For this case, we have two phases: Al and Al2O3 particles.To find the upper and lower bounds, we'll use the following equation:Em=V1E1+V2E2Lower bound:Em = 0.4(69) + 0.6(380) = 243 GPaUpper bound:Em = 0.6(69) + 0.4(380) = 177 GPab) Calculate the upper bound for the specific stiffness of this composite.p(Al)-2.71 g/cm3, pAl2O3 3.98 g/cm3Specific stiffness is defined as the ratio of the elastic modulus to density.Specific stiffness, E/ρ = Em/Vm, where Vm is the total volume and can be calculated as:Vm = V1 + V2 = 0.4 + 0.6 = 1.E/ρ= Em/VmSo the upper bound is:E/ρ=177/((0.4 x 2.71) + (0.6 x 3.98))=25.36 x 10^6 N/m3Ans: The upper bound for the specific stiffness of this composite is 25.36 x 10^6 N/m3.
Learn more about stiffness here:
https://brainly.com/question/31172851
#SPJ11
Choose the compound below that should have the highest melting point according to the ionic bonding model.
A) AlN
B) MgO
C) NaCl
D) CaS
E) RbI
According to the ionic bonding model, the compound with the highest melting point is likely to be the one with the strongest ionic bonds.
In the ionic bonding model, compounds form when there is a transfer of electrons from one element to another, resulting in the formation of positive and negative ions. The strength of the ionic bond is influenced by factors such as the charges and sizes of the ions involved.
Among the given compounds, MgO (magnesium oxide) is expected to have the highest melting point. This is because magnesium (Mg) is a metal that tends to lose two electrons and form a 2+ cation, while oxygen (O) is a nonmetal that tends to gain two electrons and form a 2- anion. The resulting Mg2+ and O2- ions have strong electrostatic attraction due to the opposite charges. This strong ionic bond requires a significant amount of energy to break, leading to a high melting point for MgO.
On the other hand, compounds like AlN (aluminum nitride), NaCl (sodium chloride), CaS (calcium sulfide), and RbI (rubidium iodide) also exhibit ionic bonding but with different ion sizes and charges. While these compounds have varying degrees of ionic bonding strength, they are expected to have lower melting points compared to MgO.
In conclusion, based on the ionic bonding model, MgO (option B) is likely to have the highest melting point among the given compounds due to its strong ionic bond resulting from the combination of a 2+ metal cation and a 2- nonmetal anion.
To learn more about compound -brainly.com/question/14186298
#SPJ11
During the microscopic observation of a drop of stagnant pond water, what criteria would you use to distinguish viable organisms from nonviable suspended debris? 50 Experiment 6: Lab Report 5. Because of a snowstorm, your regular laboratory session was can- celed and the Gram staining procedure was performed on cultures incubated for a longer period of time. Examination of the stained B. cereus slides revealed a great deal of color variability, ranging from an intense blue to shades of pink Account for this result. 5. Upon observation of the nutrient agar slant culture, you strongly sus- pect that the culture is contaminated. Outline the method you would follow to ascertain whether your suspicion is justified. 18 Experiment 2: Lab Report
1. Criteria used to distinguish viable organisms from nonviable suspended debris are motility, shape and structure.
2. The variability in color observed during Gram staining of B. cereus slides, ranging from intense blue to shades of pink, can be attributed to the extended incubation period.
3. We can use Visual Examination and Smell Test to ascertain whether your suspicion is justified.
1. To distinguish viable organisms from nonviable suspended debris in a drop of stagnant pond water during microscopic observation, the following criteria can be used:
Motility: Observe if the organisms are showing any signs of movement. Viable organisms are more likely to exhibit motility, while nonviable debris will remain stationary.Shape and Structure: Examine the morphology and structure of the organisms. Viable organisms will typically have distinct shapes and structures, such as identifiable cell walls, organelles, or appendages. Nonviable debris may appear more amorphous and lack identifiable cellular structures.Reproduction: Look for signs of reproductive structures, such as budding, spores, or division. Viable organisms will display reproductive capabilities, while nonviable debris will not exhibit such characteristics.Cellular Integrity: Assess the overall integrity of the cells. Viable organisms will have intact and well-defined cellular structures, while nonviable debris may show signs of degradation or disintegration.By considering these criteria, you can differentiate between viable organisms and nonviable suspended debris in the pond water sample.2. The variability in color observed during Gram staining of B. cereus slides, ranging from intense blue to shades of pink, can be attributed to the extended incubation period. Gram staining is a differential staining technique used to categorize bacteria into two major groups: Gram-positive and Gram-negative, based on their cell wall composition.
During prolonged incubation, B. cereus cells may undergo physiological changes, including alterations in their cell wall structure and composition. These changes can affect the uptake and retention of the Gram stain.Intense blue coloration indicates that the cells retained the crystal violet dye, characteristic of Gram-positive bacteria. Shades of pink, on the other hand, suggest that the cells did not retain the crystal violet dye effectively, potentially due to modifications in their cell wall or the presence of Gram-negative-like characteristics.Extended incubation can lead to variations in the Gram staining results, highlighting the importance of performing the staining procedure within the recommended timeframe to obtain accurate and consistent results.3. To ascertain whether a nutrient agar slant culture is contaminated, the following steps can be followed:
Visual Examination: Observe the nutrient agar slant culture for any visible signs of contamination, such as discoloration, abnormal growth, or presence of mold, fungal growth, or unusual colonies. Any visible signs of contamination indicate a potential problem.Smell Test: Take a whiff of the culture to detect any unusual or foul odors. Strong, unpleasant odors may indicate contamination.Subculturing: Take a small portion of the suspected contaminated culture and streak it onto a fresh nutrient agar plate. Incubate the plate under appropriate conditions. If the suspected contaminants grow as separate colonies on the fresh plate, it confirms the presence of contamination.Microscopic Examination: Prepare a microscope slide by placing a small amount of the suspected contaminated culture onto a slide and observe under a microscope. Look for any unusual or non-characteristic microbial morphology that could indicate contamination.Confirmatory Tests: Perform additional specific tests or assays, if available, to confirm the nature of the contamination. For example, biochemical tests, molecular techniques, or selective media can be used to identify the contaminants and differentiate them from the desired culture.By following these steps, you can gather evidence to determine whether a nutrient agar slant culture is contaminated or not.
The correct question is:
1. During the microscopic observation of a drop of stagnant pond water, what criteria would you use to distinguish viable organisms from nonviable suspended debris?
2. Because of a snowstorm, your regular laboratory session was canceled and the Gram staining procedure was performed on cultures incubated for a longer period of time. Examination of the stained B. cereus slides revealed a great deal of color variability, ranging from an intense blue to shades of pink Account for this result.
3. Upon observation of the nutrient agar slant culture, you strongly suspect that the culture is contaminated. Outline the method you would follow to ascertain whether your suspicion is justified.
To know more about Gram staining follow the link:
https://brainly.com/question/4129405
#SPJ4
Which element can form acidic compounds? Check all that apply.
Sulfur
rubidium
arsenic
selenium
silicon
zenon
antimony
The elements that can form acidic compounds are sulfur, arsenic, selenium, and antimony.
Sulfur (S), arsenic (As), selenium (Se), and antimony (Sb) are the elements that can form acidic compounds. These elements have the ability to gain electrons or donate hydrogen ions, resulting in the formation of acidic species.
Sulfur is commonly found in various acidic compounds, such as sulfuric acid (H_{2}SO_{4}), sulfurous acid ([tex]H_{2}SO_{3}[/tex]), and sulfides (e.g., hydrogen sulfide, H2S). Arsenic can form acids like arsenic acid ([tex]H_{3}AsO_{4}[/tex]) and arsenous acid (H_{3}AsO_{}). Selenium can form selenous acid ([tex]H_{2}SeO_{3}[/tex]) and selenic acid (H_{2}SeO_{4}). Antimony can react with oxygen to form antimony pentoxide ([tex]Sb_{2}O_{5}[/tex]), which can further react with water to produce antimony acid (HSb([tex]OH_{6}[/tex])).
On the other hand, rubidium (Rb), silicon (Si), and xenon (Xe) do not typically form acidic compounds. Rubidium is an alkali metal and is more likely to form basic compounds. Silicon is a nonmetal and is commonly found in covalent compounds rather than acidic ones. Xenon is a noble gas and is generally inert, meaning it does not readily form compounds, including acidic ones.
In summary, sulfur, arsenic, selenium, and antimony are the elements that can form acidic compounds, while rubidium, silicon, and xenon do not typically exhibit acidic properties.
Learn more about compounds here: https://brainly.com/question/13762398
#SPJ11
Explain what happens using chemical equation when a piece of magnesium ribbon is dropped into dilute HCl
The reaction between magnesium ribbon and dilute hydrochloric acid results in the formation of magnesium chloride and the release of hydrogen gas.
When a piece of magnesium ribbon is dropped into dilute hydrochloric acid (HCl), a chemical reaction occurs, resulting in the formation of magnesium chloride (MgCl2) and the release of hydrogen gas (H2). This reaction can be represented by the following balanced chemical equation:
Mg + 2HCl → MgCl2 + H2
In this reaction, the magnesium (Mg) reacts with the hydrochloric acid (HCl). The magnesium atoms lose two electrons to form Mg2+ ions, while the hydrogen ions (H+) from the hydrochloric acid gain these electrons to form hydrogen gas molecules (H2). The chlorine ions (Cl-) from the hydrochloric acid combine with the magnesium ions to form magnesium chloride.
The reaction is exothermic, meaning it releases heat energy. As the magnesium ribbon reacts with the hydrochloric acid, you may observe effervescence, as bubbles of hydrogen gas are released. The solution may also become warmer due to the exothermic nature of the reaction.
For more such questions on magnesium ribbon visit:
https://brainly.com/question/23259866
#SPJ8
A major component of gasoline is octane. When octane is burned in air, it chemically reacts with oxygen gasto produce carbon dioxideand water.
What mass of carbon dioxide is produced by the reaction ofof octane?
Round your answer tosignificant digits.
Please be detailed with your explanation.
The mass of carbon dioxide produced by the combustion of octane can be calculated using the balanced chemical equation for the reaction and the molar mass of octane and carbon dioxide.
The balanced chemical equation for the combustion of octane (C8H18) is:
2 C8H18 + 25 O2 → 16 CO2 + 18 H2O
From the balanced equation, we can see that for every 2 moles of octane burned, 16 moles of carbon dioxide are produced. To calculate the mass of carbon dioxide, we need to convert the moles of octane to moles of carbon dioxide using the molar ratio.
The molar mass of octane is approximately 114.22 g/mol, and the molar mass of carbon dioxide is approximately 44.01 g/mol. Therefore, the molar ratio of octane to carbon dioxide is 2:16 or 1:8.
To calculate the mass of carbon dioxide produced, we can use the formula:
Mass of carbon dioxide = (moles of octane) × (molar ratio) × (molar mass of carbon dioxide)
The exact mass calculation would require the quantity of octane, but once the moles of octane are known, the mass of carbon dioxide can be determined using the formula above.
Learn more about molar mass, below:
https://brainly.com/question/31545539
#SPJ11
Match the following.
Drag the terms on the left to the appropriate blanks on the right. Note: not all labels will be used.
ΔG>0, ΔG<ΔG∘, equilibrium, K=0, ΔG>ΔG∘, standard state, ΔG<0
1. Q > K -
2. Q > 1 -
3. Q = 1 -
4. Q < K -
5. Q = K -
6. Q < 1 -
a. ΔG>0 - 4. Q < K - This match indicates that if the change in Gibbs free energy (ΔG) for a reaction is greater than zero, it implies that the reaction is not at equilibrium.
a. ΔG>0 - 4. Q < K
b. ΔG<ΔG∘ - 1. Q > K
c. equilibrium - 5. Q = K
d. K=0 - Not applicable
e. ΔG>ΔG∘ - 2. Q > 1
f. standard state - Not applicable
g. ΔG<0 - 6. Q < 1
a. ΔG>0 - 4. Q < K
This match indicates that if the change in Gibbs free energy (ΔG) for a reaction is greater than zero, it implies that the reaction is not at equilibrium. In terms of the reaction quotient (Q) and the equilibrium constant (K), if Q is less than K, it means the reaction is not yet at equilibrium. This is because the ratio of the concentrations of the reactants and products, as represented by Q, is smaller than the equilibrium constant K, indicating that the reaction has not reached a state of equilibrium.
b. ΔG<ΔG∘ - 1. Q > K
When the change in Gibbs free energy (ΔG) for a reaction is less than the standard Gibbs free energy change (ΔG∘), it implies that the reaction is spontaneous in the forward direction. In terms of Q and K, if Q is greater than K, it means that the reaction has proceeded further than the equilibrium position, indicating that the reaction is spontaneous in the forward direction.
c. equilibrium - 5. Q = K
At equilibrium, the reaction quotient (Q) is equal to the equilibrium constant (K). This means that the concentrations of the reactants and products in the reaction have reached a balance, and there is no net change in the system over time.
d. K=0 - Not applicable
This label does not have a corresponding match. K=0 would indicate that the equilibrium constant is zero, which is not a valid scenario as equilibrium constants are always positive values.
e. ΔG>ΔG∘ - 2. Q > 1
When the change in Gibbs free energy (ΔG) for a reaction is greater than the standard Gibbs free energy change (ΔG∘), it indicates that the reaction is non-spontaneous in the forward direction. In terms of Q and K, if Q is greater than 1, it means that the reaction has proceeded further in the forward direction than it would be at equilibrium, indicating that the reaction is non-spontaneous in the forward direction.
f. standard state - Not applicable
This label does not have a corresponding match in the given options.
g. ΔG<0 - 6. Q < 1
If the change in Gibbs free energy (ΔG) for a reaction is less than zero, it implies that the reaction is spontaneous in the forward direction. In terms of Q and K, if Q is less than 1, it means that the reaction has not proceeded as far as it would be at equilibrium, indicating that the reaction is spontaneous in the forward direction.
The correct question is:
Match the following (a-g with 1.-6). Note: not all labels will be used.
a. ΔG>0,
b. ΔG<ΔG∘
c. equilibrium
d. K=0
e. ΔG>ΔG∘
f. standard state
g. ΔG<0
1. Q > K
2. Q > 1
3. Q = 1
4. Q < K
5. Q = K
6. Q < 1
To know more about Gibbs free energy (ΔG) follow the link:
https://brainly.com/question/30870882
#SPJ4
Without doing any calculations, determine the sign of ΔSsys for each of the following chemical reactions. which is ΔSsys greater than 0 and which is ΔSsys smaller than 0.
a) 2H3O^+ (aq) + CO3^2- (aq) --> CO2 (g) + 3H2O (l)
b) CH4 (g) + 2O2 (g) --> CO2 (g) + 2H2O (l)
c) PCl3 (l) + Cl2 (g) --> PCl5 (s)
d) SO3 (g) + H2O (l) --> H2SO4 (l)
Change in entropy of the system ΔSsys would be positive, negative, negative, negative respectively.
The term "ΔSsys" refers to the change in entropy of the system. The entropy change of a system is determined by considering the system's state before and after the reaction occurred. Here are the sign of ΔSsys for each of the given chemical reactions:
a) 2H3O+ (aq) + CO32- (aq) → CO2 (g) + 3H2O (l)
The reaction involves the formation of one gas molecule and three liquid molecules from two aqueous solutions. Because gas molecules have a higher entropy than liquids, the entropy of the system would rise if the reaction were to take place. Therefore, ΔSsys would be positive.
b) CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l)
The reaction involves the formation of one gas molecule and two liquid molecules from two gas molecules. The entropy of the system would therefore decrease. Therefore, ΔSsys would be negative.
c) PCl3 (l) + Cl2 (g) → PCl5 (s)The reaction involves the formation of a solid product from a liquid and a gas. Because solids have lower entropy than liquids or gases, the entropy of the system would decrease. Therefore, ΔSsys would be negative.
d) SO3 (g) + H2O (l) → H2SO4 (l)The reaction involves the formation of a liquid from two gases. The entropy of the system would therefore decrease. Therefore, ΔSsys would be negative.
Learn more about Change in entropy here:
https://brainly.com/question/28244712
#SPJ11
1. what type of polymer would you obtain if sorbital (a sugar alcohol found in sugar free gum) was used as a plasticizer addictive?
2a. Starch-borate and starch-glycerol polymers have been used for encapsulation of pharmaceutical drugs or pesticides. Explain what effect ths might have and why it would be beneficial.
2b. Are these polymers considered to be biodegradable? why or why not?
1. The type of polymer that would you obtain if sorbitol is a polyol.
2a. The use of starch-borate and starch-glycerol polymers for the encapsulation of pharmaceutical drugs or pesticides would have a number of beneficial effects.
2b. Yes, these polymers are considered to be biodegradable.
1. The type of polymer that would you obtain if sorbitol (a sugar alcohol found in sugar-free gum) was used as a plasticizer additive is a polyol. This is because sorbitol is a polyol, which is a substance used to modify the properties of polymers. The process of polymer modification involves adding polyols to the polymer matrix, which helps to reduce the glass transition temperature of the polymer. Sorbitol can be used as a plasticizer addictive because it is a natural and non-toxic compound that is biodegradable.
2a. The use of starch-borate and starch-glycerol polymers for the encapsulation of pharmaceutical drugs or pesticides would have a number of beneficial effects. These polymers are natural and non-toxic, and they are biodegradable, which means that they do not pose a risk to the environment. Additionally, they can be used to modify the properties of the drugs or pesticides, making them more effective and reducing their toxicity.
2b. Yes, these polymers are considered to be biodegradable. This is because they are made from natural materials that can be broken down by biological processes. Starch-borate and starch-glycerol polymers are particularly attractive for use in biodegradable materials because they are non-toxic and biocompatible. They can be used in a variety of applications, including packaging materials, agricultural films, and medical devices, where their biodegradability is an important factor.
To know more about polyol visit:
https://brainly.com/question/32067095
#SPJ11
Which of the following is not a colorimetric method for Protein Quantitation? a. Biuret Test b. Folin-Ciocalteu (Lowry) Assay c. Bradford Assay d. Amino Acid Analysis e. Bicinchoninic Acid (BCA) Assay
The correct option is (d.) Amino Acid Analysis. While a valuable technique for amino acid composition analysis, is not a colorimetric method for protein quantitation.
Amino Acid Analysis is not a colorimetric method for protein quantitation. It is a technique used to determine the composition and concentration of amino acids in a protein sample, but it does not rely on colorimetric reactions to quantify the protein content.
The other options listed (a. Biuret Test, b. Folin-Ciocalteu (Lowry) Assay, c. Bradford Assay, and e. Bicinchoninic Acid (BCA) Assay) are all colorimetric methods commonly used for protein quantitation.
Amino Acid Analysis, while a valuable technique for amino acid composition analysis, is not a colorimetric method for protein quantitation. The other methods mentioned are commonly used for protein quantitation and rely on colorimetric reactions to measure protein concentration.
To know more about colorimetric , visit:
https://brainly.com/question/30227806
#SPJ11
a solution of acetic acid that has a concentration of 0.10 moles per liter has a ph of 2.87. what is the likely ph of a 0.10 mole per liter solution of the conjugate base sodium acetate?
0.10 moles per liter solution of the conjugate base sodium acetate is likely to have a pH greater than 7.
Is the pH of a 0.10 mole per liter solution of the conjugate base sodium acetate likely to be acidic or basic?When acetic acid (CH3COOH) donates a proton, it forms its conjugate base, acetate ion (CH3COO-). In the given scenario, the acetic acid solution has a pH of 2.87, indicating acidity. The lower pH value suggests a higher concentration of H+ ions. As a weak acid, acetic acid partially dissociates, releasing H+ ions and acetate ions. When sodium acetate (CH3COONa) dissolves in water, it completely dissociates into sodium ions (Na+) and acetate ions. The presence of acetate ions (the conjugate base) from sodium acetate will react with the excess H+ ions in the solution, shifting the equilibrium towards the formation of acetic acid and water. This process, called the hydrolysis of salts, will consume the H+ ions, thereby increasing the pH of the solution. Consequently, the 0.10 mole per liter solution of sodium acetate is likely to have a pH greater than 7, making it basic.
Learn more about pH
brainly.com/question/2288405
#SPJ11
Calculate the change in pH when 9.00 mL of 0.100 M HCl(aq) is added to 100.0 mL of a buffer solution that is 0.100 M in NH3(aq) and 0.100 M in NH4Cl(aq). Consult the table of ionization constants as needed.
ΔpH=
Calculate the change in pH when 9.00 mL of 0.100 M NaOH is added to the original buffer solution.
ΔpH=
In both cases, the change in pH is 0.18 because the amount of HCl or NaOH added is equal to the buffer capacity of the buffer solution.
How to find pH?The buffer solution is a weak base-weak acid buffer. The pH of a buffer solution is given by the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
where:
pH = pH of the solution
pKa = negative logarithm of the acid dissociation constant
[A⁻] = concentration of the conjugate base
[HA] = concentration of the acid
The pKa of ammonia is 9.25. The concentration of ammonia is 0.100 M and the concentration of ammonium chloride is 0.100 M.
Substituting these values into the Henderson-Hasselbalch equation:
pH = 9.25 + log([NH₃]/[NH₄Cl])
pH = 9.25 + log(0.100/0.100)
pH = 9.25
When 9.00 mL of 0.100 M HCl is added to the buffer solution, the concentration of HCl is 0.0090 M. The HCl will react with the ammonia in the buffer solution to form ammonium chloride. The reaction is:
HCl + NH₃ ⇔ NH₄Cl
The concentration of ammonia will decrease and the concentration of ammonium chloride will increase. The new concentration of ammonia will be 0.091 M and the new concentration of ammonium chloride will be 0.109 M.
Substituting these values into the Henderson-Hasselbalch equation:
pH = 9.25 + log(0.091/0.109)
pH = 9.07
The change in pH is:
ΔpH = 9.25 - 9.07 = 0.18
Calculating the change in pH when 9.00 mL of 0.100 M NaOH is added to the original buffer solution:
The NaOH will react with the ammonium chloride in the buffer solution to form ammonia and water. The reaction is:
NaOH + NH₄Cl ⇔ NH₃ + H₂O + NaCl
The concentration of ammonia will increase and the concentration of ammonium chloride will decrease. The new concentration of ammonia will be 0.109 M and the new concentration of ammonium chloride will be 0.091 M.
Substituting these values into the Henderson-Hasselbalch equation:
pH = 9.25 + log(0.109/0.091)
pH = 9.43
The change in pH is:
ΔpH = 9.43 - 9.25 = 0.18
In both cases, the change in pH is 0.18. This is because the amount of HCl or NaOH added is equal to the buffer capacity of the buffer solution. The buffer capacity is the amount of acid or base that can be added to a buffer solution before the pH changes by 1 unit.
Find out more on pH here: https://brainly.com/question/26424076
#SPJ4
50 ml of 0.600 m sr(no3)2 with 50 ml of 1.60 m kio3 caculatte the equilibreum sr2
The equilibrium Sr2+ is 0.15 M.
The chemical reaction that occurs when 50 ml of 0.600 M Sr(NO3)2 reacts with 50 ml of 1.60 M KIO3 is: 2 Sr(NO3)2 + 2 KIO3 → Sr(IO3)2 + 2 KNO3From this balanced equation, it can be seen that 2 moles of Sr(NO3)2 produce 1 mole of Sr(IO3)2.
Therefore, moles of Sr(NO3)2 present initially = 0.600 × 0.050 = 0.03 mol Moles of KIO3 present initially = 1.60 × 0.050 = 0.08 mol
Since the ratio of moles of Sr(IO3)2 to Sr(NO3)2 is 1:2, therefore moles of Sr(IO3)2 formed = 0.03 / 2 = 0.015 mol
The final volume of the mixture is 50 + 50 = 100 ml
Number of moles of Sr(IO3)2 in 100 ml solution = 0.015 mol
Molarity of Sr(IO3)2 = (Number of moles of Sr(IO3)2) / (Volume of solution in L) = (0.015 mol) / (0.100 L) = 0.15 M
Therefore, the equilibrium Sr2+ is 0.15 M.
Know more about equilibrium :
https://brainly.com/question/30325987
#SPJ11
The equilibrium Sr²⁺ concentration in the solution will be approximately 0.600 mol/L.
To calculate the equilibrium Sr²⁺ concentration in the solution, we need to determine whether a precipitation reaction occurs between Sr(NO₃)₂ and KIO₃, and if so, how much Sr²⁺ precipitates.
The balanced chemical equation for the precipitation reaction between Sr(NO₃)₂ and KIO₃ is;
2Sr(NO₃)₂ + KIO₃ → Sr(IO₃)₂ + 2KNO₃
We can see that for every 2 moles of Sr(NO₃)₂, 1 mole of Sr(IO₃)₂ precipitates.
First, let's calculate the moles of Sr(NO₃)₂ and KIO3 in the solution;
Moles of Sr(NO₃)₂ = Volume (L) × Concentration (M)
= 0.050 L × 0.600 M
= 0.030 mol
Moles of KIO₃ = Volume (L) × Concentration (M)
= 0.050 L × 1.60 M
= 0.080 mol
From the balanced equation, we can see that the limiting reagent is Sr(NO₃)₂ because it has fewer moles than KIO₃.
Since 2 moles of Sr(IO₃)₂ precipitate for every 2 moles of Sr(NO₃)₂, we can conclude that all the Sr(NO₃)₂ will react and form Sr(IO₃)₂.
Now, let's calculate the concentration of Sr²⁺ ions in the solution after the reaction:
The total volume of the solution is 50.0 mL + 50.0 mL = 0.100 L
Since 2 moles of Sr(NO₃)₂ give 2 moles of Sr²⁺ ions, and we have 0.030 mol ofSr(NO₃)₂;
Concentration of Sr²⁺ ions = Moles of Sr²⁺ ions/Volume of the solution
= (2 × 0.030 mol) / 0.100 L
= 0.600 M
Therefore, the equilibrium Sr²⁺ concentration in the solution is 0.600 mol/L.
To know more about precipitation reaction here
https://brainly.com/question/29762381
#SPJ4
--The given question is incomplete, the complete question is
"A solution is prepared by mixing 50.0 mL of 0.600 M Sr(NO₃)₂ with 50.0 mL of 1.60 M KIO₃. Calculate the equilibrium Sr²⁺ concentration in mol/L for this solution. Ksp for Sr(IO₃)₂ = 2.30E-13."--
Calculate the amount of energy needed to change 441 g of water ice at -10 degree Celsius to steam at 125 degree Celsius. The following constants may be useful:
Cm (ice)=36.57 J/(mol⋅∘C)
Cm (water)=75.40 J/(mol⋅∘C)
Cm (steam)=36.04 J/(mol⋅∘C)
ΔHfus=+6.01 kJ/mol
ΔHvap=+40.67 kJ/mol
Express your answer with the appropriate units.
Therefore, the amount of energy required to change 441 g of water ice at -10 degree Celsius to steam at 125 degree Celsius is 18.1 MJ.
The given problem is about calculating the energy needed to change 441 g of water ice at -10 degree Celsius to steam at 125 degree Celsius. The following constants may be useful:Cm (ice)=36.57 J/(mol⋅∘C)Cm (water)=75.40 J/(mol⋅∘C)Cm (steam)=36.04 J/(mol⋅∘C)ΔHfus=+6.01 kJ/molΔHvap=+40.67 kJ/molThe specific heat capacity of ice: Cm (ice) = 36.57 J/(mol °C).The ice needs to be heated from -10°C to 0°C before it can be melted. The energy required will be:ΔH = Cm (ice) * mass * ΔTΔH = 36.57 * 441 * 10 = 161617.7 JThe energy required to melt ice at 0°C is given by the latent heat of fusion: ΔHfus = 6.01 kJ/mol ΔHfus = 6010 J / molAmount of energy needed to melt 441 g of ice = (ΔHfus / Molar mass) * massAmount of energy needed to melt 441 g of ice = (6010 / 18) * 441 = 1,986,850 JThe energy required to heat the water from 0°C to 100°C will be:ΔH = Cm (water) * mass * ΔTΔH = 75.40 * 441 * 100 = 3,313,440 JThe energy required to boil the water to steam is given by the latent heat of vaporization: ΔHvap = 40.67 kJ/mol ΔHvap = 40,670 J / molAmount of energy needed to boil 441 g of water = (ΔHvap / Molar mass) * massAmount of energy needed to boil 441 g of water = (40670 / 18) * 441 = 10,270,850 JThe energy required to heat the steam from 100°C to 125°C will be:ΔH = Cm (steam) * mass * ΔTΔH = 36.04 * 441 * 25 = 399,366 JTherefore, the total amount of energy needed to change 441 g of water ice at -10°C to steam at 125°C is:ΔHtotal = ΔH1 + ΔH2 + ΔH3 + ΔH4ΔHtotal = 161617.7 + 1986850 + 3313440 + 10270850 + 399366ΔHtotal = 18,081,123.7 J or 18.1 MJ.
To know more about energy visit:
https://brainly.com/question/13777679
#SPJ11
With the aid of a periodic table, arrange the following in order of increasing electronegativity: Li, Na Ca
B, Be, Li
S, Se, Cl
The complete order of increasing electronegativity is:Be < B < Li < Na < Ca < S < Se < Cl
Electronegativity is the tendency of an atom to attract the electrons of a covalent bond towards itself. It can be arranged using a periodic table by determining the groups and periods. The trend is the increase of electronegativity from left to right and bottom to top. The elements that are further from each other in the periodic table will have a higher electronegativity.Here's how to arrange the following elements in order of increasing electronegativity:Li < Na < CaFor B, Be, Li, it is arranged as: Be < B < LiFor S, Se, Cl, it is arranged as: S < Se < ClSo, the complete order of increasing electronegativity is:Be < B < Li < Na < Ca < S < Se < Cl.
Learn more about electronegativity here:
https://brainly.com/question/3393418
#SPJ11
Calculate the number of grams of Al3+ ions needed to replace 10 cmolc of Ca2+ ion from the exchange complex of 1 kg of soil
A soil has been determined to contain the exchangeable cations in these amounts: Ca2+ = 9 cmolc, Mg2+ = 3 cmolc, K+ = 1 cmolc, Al3+ = 3 cmolc. (a) What is the CEC of this soil? (b) What is the aluminum saturation of this soil?
a) The Cation Exchange Capacity, CEC, of the soil is 16 cmolc.
b) The aluminum saturation of the soil is approximately 18.75%.
What is the cation exchange capacity of the soil?(a) The CEC (Cation Exchange Capacity) of the soil is calculated from the sum of the exchangeable cations present in the soil.
CEC = Ca²⁺ + Mg²⁺ + K⁺ + Al³⁺
CEC = 9 cmolc + 3 cmolc + 1 cmolc + 3 cmolc
CEC = 16 cmolc
(b) To calculate the aluminum saturation of the soil, we need to determine the percentage of the CEC occupied by Al³⁺ ions.
Aluminum Saturation = (Al³⁺ / CEC) * 100
Aluminum Saturation = (3 cmolc / 16 cmolc) * 100
Aluminum Saturation ≈ 18.75%
Learn more about cation exchange capacity at: https://brainly.com/question/30689981
#SPJ4
What property is used to calculate the ph of a solution
A. The hydrogen ion concentration in mol/L
B. The hydrogen ion concentration in ppm
C. The hydrogen ion concentration in mg/dL
D. The hydrogen ion concentration in mol/kg
The property that is used to calculate the pH of a solution is (A) the hydrogen ion concentration in mol/L.
pH is a measure of the acidity or basicity of a solution. The pH scale ranges from 0 to 14, with 7 being neutral, values below 7 being acidic, and values above 7 being basic.
To calculate the pH of a solution, you need to know the concentration of hydrogen ions (H+) in mol/L (A).
pH is defined as the negative logarithm (base 10) of the hydrogen ion concentration, so the equation for calculating pH is:
pH = -log[H+]
For example, if the hydrogen ion concentration is 1 x 10^-4 mol/L,
the pH would be:
pH = -log(1 x 10^-4)
pH = 4
Note that pH is typically reported, so in this case, the pH would be reported as 4.0.
To know more about hydrogen ion visit:
https://brainly.com/question/8069088
#SPJ11
acrylonitrile, c3h3n, has the lewis structure shown in the figure. the molecule has ______ σ bonds and ______ π bonds.
The total number of σ bonds is 6 and the total number of π bonds is 2.
Acrylonitrile, C3H3N, has the Lewis structure shown in the figure. The molecule has 6 σ bonds and 2 π bonds.How is the Lewis structure of acrylonitrile drawn?The Lewis structure for acrylonitrile is shown below:A molecule with one triple bond (which contains one sigma bond and two pi bonds) and three single bonds (which contain sigma bonds) is acrylonitrile. The molecular geometry of acrylonitrile is linear with a bond angle of 180 degrees since the carbon atoms at either end are both sp hybridized. Nitrogen has one lone pair, while the carbon atoms are joined by a triple bond, and all atoms are in the same plane. There are 3 σ bonds (single bonds between N and C) and 3 σ bonds (1 in each of the C-C bonds and 1 in the C=N bond).Thus, the total number of σ bonds is 6 and the total number of π bonds is 2.
Learn more about C3H3N here,
https://brainly.com/question/31664279
#SPJ11
amino acids can be synthesized by reductive amination. draw the structure of the organic compound that you would use to synthesize aspartic acid.
One of the two acidic amino acids is aspartic acid. As generic acids in enzyme active sites, aspartic and glutamic acids are crucial for preserving proteins' solubility and ionic nature and aspartic acid.
Thus, The charged amino acids are primarily responsible for the buffering characteristics of proteins, which are important for preserving the body's pH balance in the serum.
A carboxylic acid group is substituted for one of the hydrogens in alanine to create aspartic acid. A polypeptide's aspartic acid's carboxyl group has a pKa of around 4.0.
A pyruvate is the -keto homolog of alanine, so too does aspartic acid have a -keto homolog in oxaloacetate. A straightforward transamination reaction can interconvert aspartic acid and oxaloacetate.
Thus, One of the two acidic amino acids is aspartic acid. As generic acids in enzyme active sites, aspartic and glutamic acids are crucial for preserving proteins' solubility and ionic nature and aspartic acid.
Learn more about aspartic acid, refer to the link:
https://brainly.com/question/9379332
#SPJ4
To make aspartic acid via reductive amination, we must start with an amine and an aldehyde or ketone.
In this case an amine compound, such as ammonia [tex](NH_3)[/tex], and an aldehyde or ketone chemical would be used.
The following describes the structure of an organic chemical that can be used to make aspartic acid via reductive amination.
[tex]H_2N-CO-CH_2-CH_2-COOH[/tex]
2-Aminobutanedioic acid, also known as -aminosuccinic acid, is the name of this substance. Aspartic acid can be made via reductive amination by reducing the chemical's carbonyl group (C=O) using a reducing agent such as sodium borohydride[tex](NaBH_4)[/tex] and reacting it with ammonia.
Learn more about reductive amination, here:
https://brainly.com/question/14207331
#SPJ4
calculate+the+empirical+formula+from+the+given+percent+compositions.+82%+nitrogen+(n),+18%+hydrogen+(h)
The mole ratio for 82% nitrogen (N) and 18% hydrogen (H) is roughly 1:3. As a result, the compound's empirical formula is NH₃ (one nitrogen and three hydrogen atoms).
To calculate the empirical formula from the given percent compositions, we need to convert the percentages into moles and find the simplest whole-number ratio between the elements. Here's the calculation:
Assuming we have 100 grams of the compound, we would have:
- 82 grams of nitrogen (N)
- 18 grams of hydrogen (H)
Now, we need to convert these masses into moles using the molar mass of each element:
- Nitrogen (N): 1 mole of N = 14.01 grams
[tex]\begin{equation}\text{Moles of N} = \frac{82 \text{ grams}}{14.01 \text{ g/mol}} \approx 5.85 \text{ mol}[/tex]
- Hydrogen (H): 1 mole of H = 1.01 grams
[tex]\[\text{Moles of H} = \frac{18 \text{ g}}{1.01 \text{ g/mol}} \approx 17.82 \text{ mol}\][/tex]
Next, we need to find the simplest whole-number ratio between nitrogen and hydrogen by dividing each number of moles by the smaller value (5.85 mol, in this case):
[tex]\[\text{Moles of N (rounded)} = \frac{5.85 \text{ mol}}{5.85 \text{ mol}} = 1\][/tex]
[tex]\[\text{Moles of H (rounded)} = \frac{17.82 \text{ mol}}{5.85 \text{ mol}} \approx 3.04\][/tex]
The ratio between N and H is approximately 1:3, so the empirical formula of the compound is NH₃ (1 nitrogen atom, 3 hydrogen atoms).
To know more about the mole ratio refer here :
https://brainly.com/question/32125056#
#SPJ11
The mole fraction of O2 in air is 0.21. If the total pressure is 0.83 atm and kH is 1.3 x 10-3 M/atm for oxygen in water, calculate the solubility of O2 in water.
2.3 x 10⁻⁴ M
1.1 x 10⁻³ M
2.7 x 10⁻⁴ M
1.3 x 10⁻³ M
Impossible to determine
Given that the mole fraction of O2 in the air is 0.21, the total pressure is 0.83 atm, and Henry's law constant (kH) for O2 in water is 1.3 x 10-3 M/atm, the solubility of O2 in water can be calculated to be 2.7 x 10⁻⁴ M.
According to Henry's law, the solubility of a gas (in this case, O2) in a liquid (water) is given by the equation: C = kH * P, Where: C is the concentration of the gas in the liquid (solubility),kH is Henry's law constant for the specific gas, P is the partial pressure of the gas. Given that the mole fraction of O2 in the air is 0.21, we can calculate the partial pressure of O2 in the air as follows: PO2 = XO2 * PT, Where: PO2 is the partial pressure of O2, XO2 is the mole fraction of O2 in air, PT is the total pressure. Substituting the given values, we have PO2 = 0.21 * 0.83 atm = 0.17343 atm. Now, we can calculate the solubility of O2 in water using Henry's law: C = kH * P = (1.3 x 10-3 M/atm) * (0.17343 atm) ≈ 2.7 x 10⁻⁴ M.
To learn more about Henry's law, click here: brainly.com/question/30636760
#SPJ11
A buffer contains 0.15 mol of propionic acid (C2H5COOH) and 0.10 mol of sodium propionate (C2H5COONa) in 1.20 L. a) What is the pH of this buffer? b) What is the pH of the buffer after the addition of 0.01 mol of NaOH? c) What is the pH of the buffer after the addition of 0.01 mol of HI?
a) The initial pH of the buffer is approximately 4.76.
b) The pH of the buffer after the addition of 0.01 mol of NaOH is approximately 4.74.
c) The pH of the buffer after the addition of 0.01 mol of HI is approximately 4.61.
To solve these questions, we need to consider the acid-base reactions of propionic acid (C₂H₅COOH) and sodium propionate (C₂H₅COONa) with the added substances. Let's break down each part:
a) To find the initial pH of the buffer, we need to determine the pH based on the acid dissociation of propionic acid. Propionic acid is a weak acid, so we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
Where pKa is the negative logarithm of the acid dissociation constant (Kₐ), [A⁻] is the concentration of the conjugate base (C₂H₅COO⁻) (in this case, from sodium propionate), and [HA] is the concentration of the weak acid (C₂H₅COOH).
First, we need to find the pKa of propionic acid. The pKa can vary depending on the source, but a commonly used value is approximately 4.87 for propionic acid.
Using the given concentrations:
[A⁻] = 0.10 mol / 1.20 L = 0.0833 M
[HA] = 0.15 mol / 1.20 L = 0.125 M
pH = 4.87 + log(0.0833/0.125)
pH ≈ 4.76
Therefore, the initial pH of the buffer is approximately 4.76.
b) After the addition of 0.01 mol of NaOH, we need to consider the reaction between NaOH and the weak acid (propionic acid). The NaOH will react with propionic acid to form sodium propionate (C₂H₅COONa) and water (H₂O). Since the concentration of propionic acid (weak acid) decreases, the pH will increase.
The reaction equation is:
C₂H₅COOH + NaOH → C₂H₅COONa + H₂O
The balanced equation shows a 1:1 stoichiometric ratio between C₂H₅COOH and NaOH. Since we added 0.01 mol of NaOH, the same amount of propionic acid will react, resulting in a decrease of 0.01 mol of C₂H₅COOH.
To calculate the new concentration of C₂H₅COOH:
[HA] = (0.15 mol - 0.01 mol) / 1.20 L ≈ 0.1167 M
Now we can calculate the new pH using the Henderson-Hasselbalch equation as we did in part a):
pH = 4.87 + log(0.0833/0.1167)
pH ≈ 4.74
Therefore, the pH of the buffer after the addition of 0.01 mol of NaOH is approximately 4.74.
c) After the addition of 0.01 mol of HI, we need to consider the reaction between HI and the conjugate base (C₂H₅COO⁻) (from sodium propionate). The HI will react with C₂H₅COO⁻ to form propionic acid (C₂H₅COOH) and water (H₂O). Since the concentration of the conjugate base (C₂H₅COO⁻) decreases, the pH will decrease.
The reaction equation is:
C₂H₅COO⁻ + HI → C₂H₅COOH + I⁻
The balanced equation shows a 1:1 stoichiometric ratio between C₂H₅COO⁻ and HI. Since we added 0.01 mol of HI, the same amount of C₂H₅COO⁻ will react, resulting in a decrease of 0.01 mol of C₂H₅COO⁻.
To calculate the new concentration of C₂H₅COO⁻:
[A⁻] = (0.10 mol - 0.01 mol) / 1.20 L ≈ 0.075 M
Now we can calculate the new pH using the Henderson-Hasselbalch equation:
pH = 4.87 + log(0.075/0.1167)
pH ≈ 4.61
Therefore, the pH of the buffer after the addition of 0.01 mol of HI is approximately 4.61.
Learn more about Buffer solution from the link given below.
https://brainly.com/question/31428923
#SPJ4
"Crystal of atom" is
a)cubical
b)rhombus
c)octahedral
d) combination of all
The answer is d) combination of all. Crystals can have different shapes and structures depending on the arrangement of atoms in the crystal lattice. Some crystals may have a cubic structure, while others may have a rhombus or octahedral structure. Therefore, "crystal of atom" can have a combination of all these structures.
[tex]\huge{\mathfrak{\colorbox{black}{\textcolor{lime}{I\:hope\:this\:helps\:!\:\:}}}}[/tex]
♥️ [tex]\large{\textcolor{red}{\underline{\mathcal{SUMIT\:\:ROY\:\:(:\:\:}}}}[/tex]
9. A student was provided with only a thermometer, a stopwatch and a beaker. What could the student measure? A 10.5g solid and 24.8 cm³ liquid B 10.5g solid and 25°C C D 24.8 cm³ liquid and 45 seconds 25°℃ and 45 seconds
The student can measure 10.5g solid and 25°C using the given equipment (thermometer, stopwatch, and beaker). Option B.
Based on the given equipment (thermometer, stopwatch, and beaker), let's examine the options to determine what the student can measure:
A. 10.5g solid and 24.8 cm³ liquid: The student cannot directly measure the mass of a solid using a thermometer, stopwatch, and beaker. Measuring the volume of a liquid would require a graduated cylinder or a measuring pipette, which is not mentioned in the given equipment. Therefore, this option is not feasible.
B. 10.5g solid and 25°C: The student can measure the temperature of an object using the thermometer, and it is possible to measure the mass of a solid by weighing it. Therefore, this option is valid. The student can weigh the solid using the balance and measure the temperature of an object using the thermometer.
C. 24.8 cm³ liquid and 45 seconds: The student can measure the volume of a liquid using the beaker. However, the stopwatch is not suitable for measuring volume or time intervals in seconds. It is specifically used for measuring time. Therefore, this option is not valid.
D. 25°C and 45 seconds: The student can measure the temperature using the thermometer. Additionally, the stopwatch can accurately measure a time interval of 45 seconds. Therefore, this option is valid. Option B is correct.
For more such question on thermometer. visit :
https://brainly.com/question/2339046
#SPJ8
A solution that contains 100.0 mL of 0.40 M of NH4Cl is O a strong acid O a strong base O a weak acid O a weak base O a buffer
A solution that contains 100.0 mL of 0.40 M of NH₄Cl is a weak acid.
Option (c) is correct.
NH₄Cl is the salt formed from the weak base ammonia (NH₃) and the strong acid hydrochloric acid (HCl). In aqueous solution, NH₄Cl dissociates to release ammonium ions (NH₄+) and chloride ions (Cl-).
The ammonium ion (NH₄+) acts as a weak acid since it can donate a proton (H+) to water, resulting in the formation of hydronium ions (H₃O+). Therefore, the solution containing NH₄Cl can be considered as a weak acid solution due to the presence of the NH₄+ ions.
It is important to note that although NH₄Cl contains the chloride ion (Cl-), which is the conjugate base of the strong acid HCl, the presence of the weak acid NH₄+ dominates the solution's acid-base behavior.
Therefore, the correct option is (c).
To learn more about weak acid here
https://brainly.com/question/13032224
#SPJ4
Complete question is:
A solution that contains 100.0 mL of 0.40 M of NH₄Cl is
a) a strong acid
b) a strong base
c) a weak acid
d) a weak base
e) a buffer
Determine the electron geometry (eg) and molecular geometry (mg) of SiF4.
A) eg=tetrahedral, mg=trigonal pyramidal
B) eg=octahedral, mg=square planar
C) eg=trigonal bipyramidal, mg=trigonal pyramidal
D) eg=tetrahedral, mg=bent
E) eg=tetrahedral, mg=tetrahedral
D) The electron geometry (eg) of SiF₄ is tetrahedral, and the molecular geometry (mg) is bent.
In SiF₄, silicon (Si) is the central atom bonded to four fluorine (F) atoms. To determine the electron geometry, we consider both the bonding and non-bonding electron pairs around the central atom. SiF4 has four bonding pairs of electrons and no lone pairs on the central atom. This arrangement gives a tetrahedral electron geometry.
However, when we consider the positions of the atoms only, without taking into account the lone pairs, we find that SiF₄ has a bent molecular geometry. The fluorine atoms are arranged in a V-shape, with the silicon atom at the center and the fluorine atoms slightly bent away from the central atom due to the repulsion between the bonding pairs.
Therefore, the correct answer is D) eg=tetrahedral, mg=bent. The tetrahedral electron geometry arises from the arrangement of bonding and non-bonding pairs around the central atom, while the bent molecular geometry results from the actual positions of the atoms in the molecule.
To learn more about molecular geometry, here
https://brainly.com/question/31993718
#SPJ4
Which of the following metals will dissolve in nitric acid but not hydrochloric?
a. Fe
b. Pb
c. Cu
d. Sn
e. Ni
Among the given metals, copper (Cu) is the one that will dissolve in nitric acid but not in hydrochloric acid.
Option (c) is correct
Nitric acid is a strong oxidizing acid that can dissolve a variety of metals, including copper. When copper reacts with nitric acid, it undergoes oxidation, and copper(II) ions ( are formed.
However, hydrochloric acid (HCl) is not a strong oxidizing agent, and it primarily acts as a proton donor (acid) in aqueous solutions. Copper does not readily react with hydrochloric acid to form soluble copper compounds. Instead, it may undergo a slow reaction with chloride ions present in hydrochloric acid to form insoluble copper chloride compounds.
To summarize, among the given metals, copper (Cu) will dissolve in nitric acid but not in hydrochloric acid (HCl).
Therefore, the correct answer will be option (c)
To know more about metals
https://brainly.com/question/29404080
#SPJ4
combine the cations listed in the left column with the corresponding anions listed on the top row to make a neutral compound in the box where the two meet.
In order to combine the cations listed in the left column with the corresponding anions listed on the top row to make a neutral compound in the box where the two meet, we need to cross-multiply the charges of the cation and anion so that the total charge equals zero.
This is because in order for a compound to be neutral, it must have a total charge of zero.
For example, if we have sodium cation and chloride anion, we can cross-multiply their charges so that the total charge is zero. Na+ has a charge of +1 and Cl- has a charge of -1, so we can combine them to form NaCl, which is a neutral compound with a total charge of zero.
Similarly, we can combine other cations and anions in the same way to form neutral compounds. For instance, we can combine (magnesium cation) and (sulfate anion) to form MgSO₄, which is a neutral compound with a total charge of zero.
Overall, to form a neutral compound from cations and anions, we need to cross-multiply their charges so that the total charge equals zero. We can then write the resulting compound in the box where the two meet.
To know more about neutral compound click on below link:
https://brainly.com/question/30308505#
#SPJ11
According to Coulomb's law, which ionic compound A-D has the largest electrostatic potential energy (i.e., largest in magnitude)? CaCl2 AlCl3 CoCl2
The required correct answer is AlCl3
Explanation: According to Coulomb's law, the ionic compound with the largest electrostatic potential energy is the compound having the largest magnitude.
Electrostatic potential energy (EPE) of ionic compounds is calculated by the Coulomb's law equation which states that:EPE ∝ (Q1 × Q2) / rwhere,Q1 and Q2 are the charges of two ionic particles.r is the distance between the two ionic particles.The larger the values of Q1 and Q2, the larger will be the EPE of the compound.
Now, looking at the given compounds:
CaCl2 has two charges of 1- and 2+, thus Q1 and Q2 values are both
Calculating the EPE of CaCl2 we get;EPE of CaCl2 = (1 × 2) / (1.5 × 10⁻¹⁰) = 1.33 × 10¹⁰ J/mol
AlCl3 has three charges of 1- and 3+, thus Q1 and Q2 values are both
Calculating the EPE of AlCl3 we get;EPE of AlCl3 = (1 × 3) / (1.5 × 10⁻¹⁰) = 2.00 × 10¹⁰ J/mol
CoCl2 has two charges of 1- and 2+, thus Q1 and Q2 values are both
Calculating the EPE of CoCl2 we get;EPE of CoCl2 = (1 × 2) / (1.5 × 10⁻¹⁰) = 1.33 × 10¹⁰ J/mol
Therefore, AlCl3 has the largest magnitude of EPE of 2.00 × 10¹⁰ J/mol as compared to the other ionic compounds CaCl2 and CoCl2. Hence, the ionic compound AlCl3 has the largest electrostatic potential energy among the given compounds.
Learn more about electrostatic potential energy here https://brainly.in/question/19615914
#SPJ11