For his network, Howard uses IPv4 addressing. He has been given the IP address 212.156.78.0 by his internet service provider. With no subnets, he is able to have 254 hosts on his network.
In order to share resources (such printers and CDs), trade files, or enable electronic communications, two or more computers are connected to form a network. A computer network can connect its computers through wires, phone lines, radio waves, satellites, or infrared light beams.
A network that is limited to a small region is called a local area network (LAN). It usually has geographical confinement, like a writing lab, a building, a school, etc.
Workstations or servers are the two broad categories for computers connected to a network. The majority of the time, servers are not directly used by people but rather run continually to offer "services" to the other computers (and their human users) on the network. Printing, faxing, and hosting software are some of the services offered.
Learn more about network here:
https://brainly.com/question/13992507
#SPJ4
if the heap is using the best fit policy in allocating blocks, what is the value of p6 after instruction 10th execution?
The value of p6 for best fit policy after instruction 10th execution is 1.
What is best fit policy?Best fit policy is a memory allocation policy to use the smallest partition that meets requirements of the memory. It is usually slower than first fit policy because it search memory every time.
The following are the stages of the scenario that occur per instruction,
1st - 4th instruction is for initial memory allocation. p1 = 1, p2 = 4, p3 = 7, p4 = 9.5th instruction frees p1. Memory location (1,2,3) is free.6th instruction frees p3. Memory location (7,8) is free.7th instruction use p5. Since the available memory location only (1,2,3,7,8), so under best fit policy memory location (7,8) is used.8th instruction frees p2. Memory location (4,5,6) is free.9th instruction frees p4. Memory location (9,10,11) is free.So, free memory location is 10th instruction use p6. Since the available memory location only (1,2,3,4,5,6,9,10,11), so under best fit policy memory location (1,2,3,4,5,6) is used. So, p6 = 1.You question is incomplete, but most probably your full question was (image attached).
Learn more about memory allocation here:
brainly.com/question/26063713
#SPJ4
suppose you write a program that reads numbers and displays the distinct numbers. the order of the number does not matter. the best data structure for storing the numbers in the program is
Basic actions are carried out through methods in the Collection interface, such as int size(), boolean isEmpty(), boolean contains(Object element), boolean add(E element), boolean remove(Object element), and Iterator iterator ()
Are array lists LIFO or FIFO?
Random access is used in arraylist. Within the list, elements can be added and removed anywhere. Despite not precisely enforcing this behaviour, you can use this as a FIFO data structure. Use Queue in its place if you require strict FIFO.
List or array, is ArrayList?
An object-containing dynamic array is made using the ArrayList class. The index is used to identify and access the elements created by the list interface, which are kept in a sequence. Making an array of objects using ArrayList
To know more about Data structure visit;
https://brainly.com/question/12963740
#SPJ4
the global system for mobile communications (gsm) utilizes what technology to create timeslots on a channel?
Time division multiple access (TDMA) technology is used by the global system for mobile communications (gsm) to establish timeslots on a channel.
The channel access technique known as time-division multiple access (TDMA) is utilized for shared-medium networks. It makes it possible for several users to share a single frequency channel by splitting the signal up into several time slots. Each user utilizes a different time slot and transmits one after the other quickly. This allows a lot of stations to use the same transmission medium by using only a portion of the channel's capacity (such as a radio frequency channel). The TDMA variant known as dynamic TDMA dynamically reserves a variable number of time slots in each frame to variable bit-rate data streams based on the traffic requirements of each data stream.
Examples of mobile phone networks include the Global System for Mobile Communications (GSM), IS-136, Personal Digital Cellular (PDC), and iDEN.
Know more about TDMA here:
https://brainly.com/question/29354258
#SPJ4
a leased line with the hdlc protocol creates a wan link between what two devices on the attached lans?
The two devices on the attached LANs to creates a WAN link from a leased line with the HDLC protocol is routers.
What is HDLC protocol?The HDLC protocol or high-level data link control is a protocol for data link layer. HDLC protocol will provide the encapsulated means for network layer packet.
The means which is provided by leased line is a physical means that can transmit the bits with this way a routers can forward bit packets onto the LANs that connecting them.
So, the LAN connection will be forward by routers with leased line as transmitter of bits and HDLC protocol will encapsulated that to network layer packet and create WAN link.
Learn more about LAN here:
brainly.com/question/8118353
#SPJ4
monitor calibration is not enough to ensure total image accuracy through the process. a. evaluation b. manipulation c. output d. input
Monitor calibration is insufficient to guarantee complete image accuracy during output.
Why does the photograph usually go through the matting process before being framed?The mat, when used in a frame, prevents the picture from contacting and sticking to the glass. Matting can be completed totally with historical materials, unlike other presenting approaches, and it is simple to undo.
What justifications exist for matting an image?Artwork can be protected by matting. Unframed art can be handled by artists and collectors without really touching the piece thanks to a mat. A mat enables airflow between the artwork and the glazing substance.
To know more about output visit:-
https://brainly.com/question/14227929
#SPJ4
which is true? a. a program must import java.io.system to use system.out b. system.output.print() only outputs objects of type string c. the output of println() for an object reference includes all data stored in the object d. data written to system.out are placed in a buffer and eventually output
Data written to System.out are initially stored in a buffer before being output.
What use do Java's System in and System out functions serve?Similar to how System.out is the console's connected output stream, System.in is its connected input stream. System.in can be forwarded from a shell in the same way as stdin can be in Unix or C terms. Java's static in field is called System.in.
In Java, what does System out Println () mean?System. out. println() is a Java statement that prints the argument that was supplied to it. Results are shown on the monitor through the println() technique. A method is often called by an objectname.
To know more about System.out visit :-
https://brainly.com/question/14686510
#SPJ4
asynchronous transfer mode is a better internet protocol. why is tcp/ip the most common protocol used today?
The most widely used email protocol, SMTP, which is a component of the TCP/IP package, regulates how email clients transmit users' email messages. Email messages are sent from the client to the email server to the receiving email server via SMTP on email servers.
The four tiers of TCP/IP functionality each have a different set of protocols: Applications can share data in a standardized manner thanks to the application layer. HTTP, FTP, Post Office Protocol 3, Simple Mail Transfer Protocol, and Simple Network Management Protocol are some of its protocols. Given that there are at least one billion hosts and an additional one billion websites on the worldwide Internet, the TCP/IP protocol stack or suite is well-liked. Additional security safeguards are needed for the protocol suite. A upper layer protocol used by apps is called the Hypertext Transfer Protocol (HTTP). Due to its widespread usage, this is significant. VPN tunnels and web sockets have both been known to use it in addition to web pages and online services.
To learn more about SMTP click the link below:
brainly.com/question/15071479
#SPJ4
bentley is the head of a software development team and needs to use a web app for project management. which of the following web apps best suits his needs? a. docs b. slack c. trello d. powerpoint
Option A is correct. The most likely causes, given that you are troubleshooting a failing notebook computer system, are alternatives A.
The LCD assembly's inverter has stopped functioning properly. It is necessary to replace the cold cathode fluorescent light because it has burned out. Troubleshooting, a methodical approach to problem-solving, is widely used to locate and fix issues with complex equipment, electronics, computers, and software systems. A common method of problem-solving used to repair malfunctioning parts or functions on a machine or system is troubleshooting. A rational, thorough search for the problem's cause is necessary in order to address a problem and bring the product or process back in operation. To locate the symptoms, troubleshooting is necessary.
Learn more about computer here-
https://brainly.com/question/28479203
#SPJ4
wilson has requested your help to suggest an encryption method that will provide the highest security against attacks. which encryption process should you suggest?
Susan's private key (The message must be encrypted using Susan's key so that she can decrypt it and read it).
Utilize: Bob's secret key. (Bob encrypts the hash using his private key. Asymmetric cryptography's most popular algorithm. The XTS-AES 128-bit encryption algorithm is used by BitLocker Device Encryption. HTTPS encrypts messages using an encryption protocol. Previously known as Secure Sockets Layer, the technology is now known as Transport Layer Security (TLS) (SSL). Diffusion refers to the idea that altering only one input character will result in numerous output characters changing. A particular family of algorithms is employed to secure the integrity of trades in addition to cryptographic techniques that are used to ensure the confidentiality of conversations. The term "cryptographic hash functions" refers to them.
Learn more about technology here-
https://brainly.com/question/8645052
#SPJ4
a good way to help manage the scope of a project is: . check all that apply. group of answer choices implement a formal change approval process use jad and prototyping to minimize potential of scope creep defer additional requirements as future system enhancements beware of scope creep
Scope creep refers to project scope changes done without following any control mechanisms, such as change requests.
What is scope creep, and what effects does it have on project management?Simply described, scope creep is the addition of new features, modification of current requirements, or alteration of the pre-established project goals. Because they demand extra resources, time, and money that were not anticipated at the start, they can enter at any point and upset your entire project approach.
What does a scrum scope creep mean?When a project expands beyond its initial goals while still under development, this is known as scope creep (i.e., work added that was not part of an original sprint, epic, or even release). There are several causes of scope creep, including: market circumstances Conditions alter, necessitating a new feature set.
To know more about scope creep visit:-
https://brainly.com/question/13175798
#SPJ4
discuss what information can be gleaned from a cockpit that basically has an analog array of instruments?
The cockpit houses all the display, control, and communications gear that the crew needs to fly and manage the aircraft both on the ground and in the air, all within easy reach of the sitting crew.
We utilize cockpit because...The area where the pilot and co-pilot control the aircraft is known as the cockpit. The cockpit's two primary purposes are to give the pilot an excellent view and to make all control elements easily accessible to them.
What does a cockpit now go by?The cockpit is where the pilots and crew sit when operating an aircraft. One pilot may sit in the cockpit of a small aircraft. A flight deck, often known as a cockpit, is similar to a ship's bridge or the driver sits in the cab of a truck, which is where the vehicle is controlled.
To know more about cockpit visit:-
https://brainly.com/question/10733947
#SPJ4
which would you use to replace the contents of an html page with the value stored in a variable named student?
Answer:
(Student.innerHTML);
a remote access policy tends to cover every remote access option. what are some common remote access methods?
Some of the common remote access methods are Dial-up, VPN, web portal access.
With the aid of a network connection, an authorized user can connect to a computer or network remotely from another location.
Users who are located remotely can at any time access data and other system resources from any servers or devices that are linked to the network. Employee productivity rises as a result, and employees are better able to work with colleagues throughout the world.
Technical support staff members can connect remotely to users' computers to assist them in resolving problems with their software or systems.
A virtual private network (VPN) connection for remote access is a popular way to grant remote access. The development of VPN technology made it possible for branch offices and distant users to securely access business apps and other resources.
To learn more about Remote access click here:
brainly.com/question/28900477
#SPJ4
a network administrator configures the port security feature on a switch. the security policy specifies that each access port should allow up to two mac addresses. when the maximum number of mac addresses is reached, a frame with the unknown source mac address is dropped and a notification is sent to the syslog server. which security violation mode should be configured for each access port?
warning
protect
shutdown
restrict
Answer:
protect
Explanation:
When the "protect" mode is configured, the port security feature on the switch will drop any frames with unknown source MAC addresses and send a notification to the syslog server when the maximum number of allowed MAC addresses is reached. This allows the network administrator to be notified of potential security violations, while still allowing the port to continue functioning and forwarding frames.
The other security violation modes have different behavior:
"warning" mode sends a notification to the syslog server but does not drop frames with unknown source MAC addresses."shutdown" mode disables the port when the maximum number of allowed MAC addresses is reached."restrict" mode drops all frames with unknown source MAC addresses, but does not send a notification to the syslog server.what accesses organizational databases that track similar issues or questions and automatically generates the details to the customer service representative who can then relay them to the customer?
Call scripting makes use of organizational databases that keep track of similar problems or inquiries and automatically generates information that is then given to the customer service agent so that they can explain it to the consumer.
any collection of data, or information, that is carefully structured for quick search and retrieval by a computer. Also known as an electronic databases. In order to make it easier to store, retrieve, modify, and delete data while carrying out various data-processing tasks, databases are designed in this manner. When a user makes a query, a database management system (DBMS) pulls the relevant data from the database.
In the form of a file or group of files, a database is kept. The data included in these files can be divided up into records, each of which has one or more fields. The basic units of data storage are fields, and each field typically contains data related to one feature or attribute of the thing that the database is used to represent.
Learn more about databases here:
https://brainly.com/question/29633985
#SPJ4
the neurotransmission system of the human body is a communication network. what is this network composed of? (mark all that apply.)
The neurotransmission system of the human body is a communication network that is composed of A: Synapses B: Neurotransmitters and C: Receptors.
The neurotransmission system of the human body is a communication system of the human brain that is estimated to contain 86 billion neurons. In the neurotransmission system, those billions of brain neurons communicate with one another by passing chemical messages at the synapse - the small gap between cells. Receptors in neurotransmission are resonpislbe to set the motion of chemical signaling events within the cell. While neurotransmitters are vital components of neurotransmission that carry chemical signals from one neuron to the target cell. Without neurotransmitters, the human brain and body cannot function.
"
Complete question:
the neurotransmission system of the human body is a communication network. what is this network composed of? (mark all that apply.)
Synapses
Neurotransmitters
Receptors
Antigens
"
You can learn more about neurotransmission system at
https://brainly.com/question/14307178
#SPJ4
confirm form resubmissionthis webpage requires data that you entered earlier in order to be properly displayed. you can send this data again, but by doing so you will repeat any action this page previously performed. press the reload button to resubmit the data needed to load the page. err_cache_miss
I don't know if this will help but.
Right click on your chrome shortcut, select properties. In the target field, add: “-disable-prompt-on-repost” without the quotes after chrome.exe
when passing an array as a parameter, which array element type does not require a second parameter defining the number of elements in the array?
Pass an array as a pointer to pass it as a parameter to a function (since it is a pointer). For instance, the following method sets array A's first n cells to 0.
In C++, an entire array cannot be provided as an argument. However, by mentioning the array's name, you can supply a pointer to an array without an index.
Only the array name is supplied as a parameter to pass a full array to a function. calculateSum(num), result But take note of how [] is used in the function specification. This tells the compiler that you are handing the function a one-dimensional array.
When we provide an array to a function as an argument, we are actually passing the address of the array in memory, which is the reference. To pass an array to a function, simply pass the array as the function's parameter (like normal variables).
Know more about array here:
https://brainly.com/question/19570024
#SPJ4
Which of the following is not an inheritance mapping strategies?
a) Table per hierarchy
b) Table per concrete class
c) Table per subclass
d) Table per class
Answer:
option d
Explanation:
I think it is not an inheritance mapping strategies
which of the following traverses a significant distance and usually supports very high data throughput? question 11 options: a) lan b) wan c) can d) man
A traverse that has a significant distance and usually supports very high data throughput is known as the WAN. Thus, the correct option for this question is B.
What is a Traverse?A traverse may be defined as the process of visiting or touching the elements of the structure and doing something with the data. Traversing is a process in which each element of a data structure is accessed successfully.
A WAN (wide area network) traverses a significant distance and usually supports very high data throughput. A wide area network (also known as WAN), is a large network of information that is not tied to a single location.
WANs can facilitate communication, the sharing of information, and much more between devices from around the world through a WAN provider.
Therefore, a traverse that has a significant distance and usually supports very high data throughput is known as the WAN. Thus, the correct option for this question is B.
To learn more about WAN, refer to the link:
https://brainly.com/question/1167985
#SPJ1
a coin is tossed 10 times and the output written as a string. what is the expected number of hh? note that in hhh, number of hh
The result is written as a string after 10 coin tosses. The predicted amount of hh is nine.
The recursive relation I came up with is
E(10)=1/2E(9)+1/4E(8)+1/4(E(9)+1)
The last toss has a probability of 1/2, so we only need to look at the number of consecutive heads in the first nine tosses. However, if the last toss is H, it matters what the second last toss was; if it was TH, then the number of consecutive heads was the same as in the first eight tosses; however, if it was HH, then the number of consecutive heads was one more than the number of heads in the first nine tosses.
The solution given states the following recursive relation
E(10)=1/2E(9)+1/4E(9)+1/4(E(9)+1)
In programming, a string is a form of data that is used to represent text rather than integers. Letters, numbers, symbols, and even spaces can all be found in a string, which is a collection of characters. For it to be recognized as a string, it needs to be encapsulated in quotation marks.
For instance, "liquid" and the question "What is liquid? Both of these strings are in a template language. Even the letter combination "98OkJJ$%janUJ£" is regarded as a string.
Let's look at an instance where we might use this. Let's say we only want to display a particular sentence if the company type is limited. We first make a variable called company type and assign it the word "limited." Depending on the specific data type and programming language.
Learn more about string here:
https://brainly.com/question/13088993
#SPJ4
which type of fiber optic cable supports 10 gigabit ethernet with a maximum segment length of up to 40 km?
A segment length of up to 40 kilometers can be supported by 10GBasER single-mode fiber optic cable for 10 gigabit ethernet.
What is the 10Gb Ethernet standard?10 Gigabit Ethernet, which adheres to IEEE 802 standard, is an electronic data transmission system that allows data to be transferred at a rate of 10 billion bits per second. Additionally, it is referred to as 10GbE, 10GE, and 10GigE.
What kind of cable is utilized for high bandwidth and broadband 10 Gbps Ethernet?Cat6 cable offers more bandwidth and data transfer rates of up to 1 Gbps over 100 m, the same as Cat5e, as compared to Cat5e.However, Cat6 is able to achieve 10 Gbps speeds over shorter distances of up to 37 m because of its improved shielding and larger capacity (121 ft).
To know more about ethernet visit:-
https://brainly.com/question/13441312
#SPJ4
a(n) ____ is a built-in formula that uses arguments to calculate information.
A function is a built-in formula that uses arguments to calculate information.
It is a type of formula that takes certain values, or arguments, and performs a calculation.
Using Functions to Calculate Information in ExcelFunctions can be used to calculate:
Mathematical equationsStatistical information CalculationsFunctions are widely used in Excel, with hundreds of formulas available to use. The syntax of a function is usually the function name followed by parentheses containing the arguments.
For example, the SUM function adds up all of the values in a range of cells, and is written as SUM(range).Functions can be combined with other formulas and functions to create a more powerful and complicated formula.
For example, the MAX function can be combined with the MIN function to find the largest and smallest values in a range.Learn more about Functions: https://brainly.com/question/22340031
#SPJ4
What does ""we have received notice that the originating post is preparing to dispatch this mail piece"" mean (from USPS)?
It indicates that the item or items you are shipping through the USPS have had tracking information generated for them, have typically been scanned into the system, and that the originating post, which serves as the starting point for those packages, is preparing to move that shipment through the USPS infrastructure.
What is USPS (U.S. Postal Service)?
The U.S Post Office, also referred to as the United States Postal Service (USPS).
The delivery of mail service throughout the United States, including its associated states and insular territories, is the responsibility of U.S. Mail, an independent executive branch organization.
It is one of the few governmental organizations that the US Constitution expressly grants authority to.
516,636 career employees and 136,531 non-career employees work for the USPS as of 2021.
To know more about USPS, visit: https://brainly.com/question/28163049
#SPJ4
what kind of policy defines the actions users may perform while accessing systems and networking equipment?
A due process policy is a policy that defines the actions users may perform while accessing systems and networking equipment.
Architecture. The foundation of a peer-to-peer network is the notion that equal peer nodes can simultaneously act as "clients" and "servers" to other nodes. The client-server paradigm, in which communication normally travels to and from a central server, is different from this method to network design. Detective. Detective controls are designed to spot dangerous events as they happen and to support investigations and audits after the fact. The network of all the individuals, organisations, enterprises, assets, tasks, and technical developments involved in the manufacture and distribution of an item is known as a supply chain. The distribution of raw materials from the supplier to the manufacturer and on to the ultimate delivery to the client make up the entirety of the supply chain.
To learn more about accessing systems click the link below:
brainly.com/question/14128322
#SPJ4
refer to the exhibit. an administrator is trying to configure the switch but receives the error message that is displayed in the exhibit. what is the problem?
An administrator is trying to configure the switch but receives an error message. The administrator is attempting to configure the switch without first enabling privileged EXEC mode, which is the problem.
What is EXEC mode?One advantage of turning on privileged EXEC mode is that it gives the administrator the most access and control possible over the switch. The administrator can customize the switch to their particular needs because they have the highest level of access.
This entails configuring particular access control lists and making adjustments to the switch's configuration files. The administrator does not have access to all the commands and options that are available in privileged EXEC mode while operating in user EXEC mode.
Therefore, the issue is that the administrator is trying to configure the switch without first enabling privileged EXEC mode.
To learn more about EXEC mode, refer to the link:
https://brainly.com/question/10937817
#SPJ1
1. prior to java 7, you write to a file with a call to the bufferedwriter class's write() method. true or false? true false
True. The BufferedWriter class provides a write() method that can be used to write characters, strings, and arrays of characters to a file. Before Java 7, you would use the BufferedWriter class to write to a file.
In Java, the BufferedWriter class is a type of Writer that provides buffering for output streams. It stores output in an internal buffer, which is written to the underlying output stream only when the buffer is full or when the flush or close method is called. This can improve the performance of output operations by reducing the number of calls to the underlying system, which can be expensive. It is important to call the close method when you are finished using the BufferedWriter, as this will release any resources that it is using and ensure that the output is properly written to the underlying stream.
Learn more about BufferedWriter, here https://brainly.com/question/13101214
#SPJ4
molly has just taken a test of her capacity to learn to be a computer programmer. this is an example of a(n) test.
Where Molly has just taken a test of her capacity to learn to be a computer programmer. this is an example of a(n) Aptitude test.
What is an Aptitude Test?The Computer Aptitude Test is a scientifically proven test that assesses your ability to operate with computers. Essentially, it assesses your capacity to solve issues rapidly, which is required to fully excel in the sector of information technology. This exam does not require any computer skills or experience.
The Programmer Aptitude Test is intended to assist organizations in hiring entry-level programmers by assessing a candidate's ability to acquire and apply the skills required to be a successful programmer. The exam assesses two critical skills for strong IT performance: 1) linear thinking and 2) learning capacity.
Learn more about Computer Programming:
https://brainly.com/question/14618533
#SPJ1
laura wants to deploy a wpa2 secured wireless for her small business, but she doesn't have a radius server set up. if she wants her wi-fi to be encrypted, what is her best option for wireless authentication?
Her best option would be to use WPA2-Personal or WPA-Personal, which are pre-shared key (PSK) authentication methods that do not require a RADIUS server.
What is WPA2?
WPA2 is a security protocol used to protect wireless networks. It is the successor to the original Wi-Fi Protected Access (WPA) protocol, and is one of the most widely used wireless security protocols. WPA2 uses a combination of encryption and authentication to provide strong security for wireless networks. The encryption used by WPA2 is based on the Advanced Encryption Standard (AES), which is considered to be one of the strongest available. Additionally, WPA2 uses an authentication protocol known as 802.1x, which requires users to authenticate with a username and password before they can access the network. WPA2 also provides enhanced security features such as robust key management, message integrity checks, and secure remote access. WPA2 is the most secure wireless security protocol available, and is recommended for all wireless networks.
These methods use a shared password, which is entered into the wireless router and all clients that connect. This password is used to encrypt the data transmitted over the wireless connection.
To learn more about WPA2
https://brainly.com/question/28255091
#SPJ1
which extended acl port number parameter indicates a direct match for a specific application/application number?
The port number parameter in an extended access control list (ACL) can be used to specify a specific application or application number that should be directly matched by the ACL.
For example, if you wanted to allow or deny access to a specific application that uses a particular port number, you could use the port number parameter in the ACL to specify that port number.
What is the Port number parameter?
Overall, the port number parameter in an extended ACL allows you to specify a specific application or application number that should be matched by the ACL, allowing you to more precisely control access to specific applications or services on your network.
For example, you could use the port number parameter to allow or deny access to a specific application that uses TCP port 80 (which is commonly used for HTTP traffic) by including a rule in the ACL that matches traffic on TCP port 80. Similarly, you could use the port number parameter to allow or deny access to a specific application that uses UDP port 53 (which is commonly used for DNS traffic) by including a rule in the ACL that matches traffic on UDP port 53.
To learn more about access control list (ACL), visit: https://brainly.com/question/29526734
#SPJ4