how to run and connect a wire from a receptacle in one room to a switch and receptacle in another room

Answers

Answer 1

To run a wire from a receptacle in one room to a switch and receptacle in another room, you will need to follow these steps:

Turn off the power to the circuit that you will be working on at the main electrical panel.Use a voltage tester to confirm that the power is off.Locate the receptacle in the first room and remove the cover plate.Identify the hot, neutral, and ground wires in the receptacle box. The hot wire is typically black or red, the neutral wire is white, and the ground wire is green or bare copper.Measure the distance from the receptacle to the switch and receptacle in the second room, and add a few feet to allow for any necessary bends or turns.Cut a length of wire that is long enough to reach from the receptacle to the switch and receptacle in the second room.Strip the insulation from the ends of the wire.Connect one end of the wire to the receptacle in the first room by attaching the hot wire to the brass terminal, the neutral wire to the silver terminal, and the ground wire to the green or bare copper terminal.Run the wire through the wall or ceiling to the switch and receptacle in the second room. You may need to use wire staples to secure the wire to the framing members.Locate the switch and receptacle in the second room and remove the cover plates.Identify the hot, neutral, and ground wires in the switch and receptacle boxes.Connect the other end of the wire to the switch and receptacle in the second room by attaching the hot wire to the brass terminal, the neutral wire to the silver terminal, and the ground wire to the green or bare copper terminal.Replace the cover plates on the switch and receptacle in the second room.Turn the power back on at the main electrical panel and test the switch and receptacle to confirm that they are working properly.

That electrical work can be dangerous and should only be performed by a qualified electrician. If you are not comfortable or familiar with electrical work, it is recommended that you hire a professional to complete the job for you.

Learn more about electrical, here https://brainly.com/question/12791045

#SPJ4


Related Questions

A car is traveling on michigan street towards ward street. The car plans to turn right onto ward street. What is the angle measure of the turn?.

Answers

The angle measure of the turn is 105 degrees.

Acute Angle: An acute angle is one that is less than 90 degrees. Right Angle: A right angle is one that is exactly 90 degrees. Obtuse Angle An angle larger than 90 degrees is referred to as an obtuse angle.

An automobile moving in the direction of Ward Street on Michigan Street. Onto Ward Street, the automobile intends to turn right. the Ward Street angle is as follows: Michigan St Pennsylvania St The turn's angle is measured as

Since 75+x = 180 (a straight line)

Then x = 180-75=105

Know more about Angles at:

https://brainly.com/question/25716982

#SPJ4

How do you find the frequency of a wavelength example?

Answers

Thus, from largest wavelength radio waves, microwaves, infrared, visible light, ultraviolet, x-rays, and ultimately gamma rays, which have the shortest wavelengths, are available.

How is the frequency example solved? The following are the many types of electromagnetic waves: radio waves, which have the longest wavelengths; microwaves; infrared; visible light; ultraviolet; x-rays; and ultimately, gamma rays, which have the shortest wavelengths.Subtract the duration of the event from the number of occurrences to determine frequency.Example:In Anna's calculation, the time is divided by the total number of webpage clicks (236). (one hour, or 60 minutes).Her average click rate is 3.9 per minute, she discovers.How many whole waves occur in a second is known as frequency.As a measure of frequency,Hertz (Hz = 1/second) is the unit of measurement for frequency.If a wave with a wavelength of 2 meters is moving at a speed of 6 meters per second, then 3 full waves pass by in a second.Consequently, the frequency is 3 waves per second (6/2), or 3.

To learn more about  frequency of wavelength refer

https://brainly.com/question/10728818

#SPJ4

Which is not a property of covalent solids?
A brittleness
B high melting point
C high lattice energy

Answers

Covalent solids exhibit low melting points and boiling points. Therefore, option B is correct.

What are covalent compounds?

In a covalent compound, the covalent bond is formed by the mutual sharing of electrons that can hold all molecules together. Shared electron pairs are difficult to give away as nuclei of two elements together share the electrons therefore these types of bonds are stronger.

A covalent network solid can be described as a chemical compound in which the atoms are bonded by covalent bonds in a continuous network. The covalent solids are generally brittle in nature.

The melting points for covalent solids are generally low while high melting points for ionic solids.

Learn more about the covalent compound, here:

brainly.com/question/12144907

#SPJ1

If you catch the ruler 8.3 cm from the lower end, what is your reaction time? Express your answer using two significant figures.

Answers

Answer:

Below

Explanation:

The time it take the ruler to fall .083 m is given by

  d = 1/2 a t^2       d = .083 m   a = 9.81 m/s^2

       t = .13 s

A mass spectrometer has a magnetic field of 5.00 mT. It is used to test an unknown particle which has a charge of 2e and is travelling at 100 m/s. If the resulting radius of curvature for the ion is measured to be 1.67 mm:

A. What is the particle's mass?
B. Which element is it? (You may require a periodic table.)

Answers

Answer:

A mass spectrometer uses a magnetic field to separate ions based on their mass-to-charge ratio. The mass of an ion can be calculated from its charge, velocity, and the radius of curvature of its path in the magnetic field, using the formula m = (qBv)/(2πr), where m is the mass, q is the charge, B is the magnetic field, v is the velocity, and r is the radius of curvature.

In this case, the magnetic field is 5.00 mT, the charge of the unknown particle is 2e, and its velocity is 100 m/s. The radius of curvature of the ion's path is measured to be 1.67 mm. Plugging these values into the formula above, we get:

m = (2e * 5.00 mT * 100 m/s) / (2π * 1.67 mm) = 0.24 g/mol

Therefore, the mass of the unknown particle is 0.24 g/mol.

To determine which element the particle is, we can use the periodic table to find an element with a mass-to-charge ratio of 0.24 g/mol. The element with the closest match is magnesium (Mg), which has a mass-to-charge ratio of 24.31 g/mol. Therefore, the unknown particle is likely to be a magnesium ion (Mg²⁺).

What are the example of radiogenic?

Answers

Answer:

Radon and helium both of which form during the decay of heavier elements in bedrock.

(6) Different colors of light correspond to different: (I) frequencies (II) intensities (III) wavelengths (A) I only (B) Il only (C) Ill only (D) I and IlI (E) all of the above

Answers

Answer:e all of the above

Explanation:

What causes thermal energy to transfer between two substances

Answers

What is needed for heat transfer to take place is a difference in temperature between two objects. Without this difference, no heat transfer can take place. Heat can be transferred in three ways: by conduction, by convection, and by radiation.

How is cutoff value calculated?

Answers

The term "cutoff" in theoretical physics refers to an artificial maximum or minimum value of energy, momentum, or length that is used to exclude objects having values that are more or smaller than these physical quantities from calculations.

How often does a cutoff occur?

A cutoff frequency, also known as a corner frequency or break frequency, is the frequency response threshold at which energy begins to be attenuated (reflected or diminished) rather than pass through a system.

The frequency above or below which the power output of a circuit, such as a line, amplifier, or electronic filter (such as a high pass filter), has decreased to a specific percentage of the power in the passband is known as the cutoff frequency or corner frequency in electronics.

The passband power, commonly known as the 3 dB point since a decline of 3 dB roughly equates to half power, is the proportion that occurs most frequently. The voltage ratio is falling in this case.

To learn more about cutoff values or cutoff frequency from given link

https://brainly.com/question/27986610

#SPJ4

How is the rule for the interaction between magnetic poles similar to the rule for the interaction between electrically charged particles?

Answers

In that, it states that similar poles repel, unlike poles attract and that the force is proportional to the inverse square of the distance between two poles.

The pushing or tugging of an object is considered to be exerting force. Whenever two things interact, push and pull are the result. Stretching and crushing are further examples of force expressions.

An external agent known as a force has the power to alter a body's state of rest or motion. There is a direction and a magnitude to it. When applying force, it is important to consider both the direction of the force and the actual application of the force.

You should emphasize this as the main point of your education at this level because a push or a pull is referred to as a force. In our daily lives, forces appear in many different ways.

Learn more about force here:

https://brainly.com/question/29096913

#SPJ4

Suppoe you are in a dark room. Can you ee object in the room? Can you ee object outide the room?

Answers

I may or may not  see object in the dark room or outside the room because it all depends on the presence of light.

We realize that we can see an item when light reflected from its surface enter our eyes.There is no light in obscurity room .As there will be no light in obscurity room there will be no reflection. So we can not see any item in the room, In the event that there is light external the room, we will actually want to see object outside the room. This is on the grounds that the light reflected from object make picture in our eyes. So on the off chance that there is no light we will not ready to see, assuming there is light we will ready to see.

To know more about light, visit here:

https://brainly.com/question/2839762

#SPJ4

How many companies have set Scope 3 targets?

Answers

From 936 firms in 2010 through 3,317 firms in 2021, more businesses reported Scope 3 pollutants in the available CDP dataset.

How many businesses have a science-based objective?

A zero-carbon economy is being implemented around the world.The Research Based Goals initiative (SBTi) is working with more over 4,000 companies and financial institutions to cut their emissions in accordance with climate science.Learn more about their commitments and goals.

How are Scope 3 emissions targeted?

Needed to make an informed transportation decisions, selecting which products or vendors to use, and pushing their suppliers to cut their own emissions are all ways that businesses can lower their Scope 3 emissions.

To know more about Scope 3 visit:

https://brainly.com/question/29546969

#SPJ4

What does N solve mean?

Answers

The function NSolve("Equation", "Variable = starting value") generates a list of numerical solutions for the given equation for the specified unknown variable and its starting value.

What accomplishes N solve?

Searches for solutions over the domain of real numbers in an effort to obtain numerical approximations to the solutions of the system of equations or inequalities for the variables vars.

Is there an infinite number of solutions?

There are some equations that have infinitely many or no solutions. When simplified, equations without solutions won't have the same value. The same constant will be used on both sides to simplify equations having infinite solutions. An inconsistent system is a set of equations that cannot be solved.

To know more about system of equations visit:-

https://brainly.com/question/24065247

#SPJ4

Another piece of copper has a volume of 7 cm3 what is its mass?

Answers

The mass of a piece of copper that has volume of 7[tex]cm^{3}[/tex] is 62.58g.

A piece of copper has a volume of 7 [tex]cm^{3}[/tex], find what is its mass?

The element copper (Cu) is a reddish, very ductile metal belonging to Periodic Group 11 that has an exceptional ability to conduct heat and electricity. In nature, copper can be found in its free metallic state.

Given,

Volume = 7 cm^3

we know that,

The density of copper is 8.960g/cm^3 in room temperature.

Density = mass / volume

Mass = Density x Volume

Mass = 8.960 x 7

Mass = 62.72 g

Mass of copper has a volume of 7 cm^3 is 62.72g.

To learn more about volume refer to

https://brainly.com/question/12410983

#SPJ1

What is the relationship between the mass of a student and the amount of work they do?

Answers

The relationship between the mass of a student and the amount of work they do is that the greater the mass, the more work.

What is Work?

This is referred to as any type of activity which requires the use of physical or mental effort by an individual or thing.

In a scenario where an individual has a greater mass then there will be more work done and vice versa as a result of the formula of work being Force × distance where the Force = mass × acceleration which therefore  explains the relationship between the mass of a student and the amount of work they do.

Read more about Work here https://brainly.com/question/25573309

#SPJ1

What causes magnetic stripes to form?

Answers

Answer:

The striped magnetic pattern develops because, as oceanic crust pulls apart, magma rises to the surface at mid-ocean ridges and spills out to create new bands of ocean floor. Later, after the planet’s magnetic field flips again, the next stripe of new ocean floor aligns its polarity.

Explanation:

hope this helps!

in this experiment, what would be the effect if the point on the arm hanging the bob and the pointer are not on the same vertical line in the experiment?

Answers

If  the point on the arm hanging the bob and the pointer are not on the same vertical line then the torque applied by the bob will not be zero.

When the point of arm and the pointer are in same vertical line than the angle between the point of arm and pointer will not be zero. We know that  Torque is defined as the cross product of distance of  point where force is applied  and force applied on the body.

In other words, Torque=distance × Force

or Torque=rFsinθ(since cross product involves sinθ) where r is the distance and F is the applied force.

Since angle is not zero, therefore angle(θ) will be greater than zero,so sinθ have some value which is greater than zero,and it is enough to rotate the system from its equilibrium point.Due to torque,system will become unstable.

To know more about torque, visit here:

https://brainly.com/question/5352966

#SPJ4

(Complete question) is:

If a metal bob is rotated in a uniform circular motion in this experiement, what would be the effect if the point on the arm hanging the bob and the pointer are not on the same vertical line?

consider the circuit shown in (figure 1). the initial current in the inductor is is(0+) = 0.

Answers

The questions is incomplete so I answered it in general way.

I= 1/L∫Vdt, where I is the current flowing through the inductor, L is the inductor's inductance, and V is the voltage across the inductor, is the formula that determines the inductor current depending on these input parameters. You will frequently come across the expanded formula I= I0 + 1/L∫Vdt.

A passive two-terminal electrical device known as an inductor, also known as a coil, choke, or reactor, stores energy in a magnetic field as electric current passes through it. Typically, an inductor is made out of insulated wire twisted into a coil.

According to Faraday's law of induction, when the current through the coil changes, the time-varying magnetic field induces an electromotive force (emf) (voltage) in the conductor. Lenz's law states that the induced voltage has an opposing polarity (direction) to the change in current that caused it. Inductors so reject any changes in the current flowing through them.

To know more about inductor

https://brainly.com/question/15893850

#SPJ4

A microwave has a frequency of
90 GHZ. What is the energy of
electromagnetic radiation from
the microwave?

Answers

The energy of the electromagnetic radiation from the microwave is equal to 5.96 × 10⁻²³ J.

What is photon energy?

The energy carried by one photon of any electromagnetic radiation is known as photon energy. This energy is directly proportional to the frequency of electromagnetic radiations and inversely proportional to their wavelength.

To calculate the energy of the photon, we can use the following relation:

The mathematical formula of energy of photon: E = hc/λ

where E is energy, h = Planck's Constant is equal to  6.626 × 10⁻³⁴ Js and c = speed of light = 3 ×10⁸ms⁻¹, λ is wavelength of light

Given, the frequency of the electromagnetic radiation, ν = 90 GHz

ν = 90 ×10⁹ Hz

The energy of one photon microwave radiations is equal to E = hν

E = 6.626 × 10⁻³⁴Js ×  90 ×10⁹ s⁻¹

E = 596.34 × 10⁻²⁵

E = 5.96 × 10⁻²³ J

Learn more about photon energy, here:

brainly.com/question/11016364

#SPJ1

What is the formula used to calculate energy using frequency?

Answers

E = hv is the energy equation. In the formula, E stands for energy, h for Planck's constant (6.626 x 10 -34 J s), and v for frequency. Since frequency rises as energy falls, frequency and energy are related directly in the energy equation. Because h is a constant, this is conceivable.

What is the energy and frequency relation?

Each quantum's energy content is directly influenced by the radiation's frequency. Since the relationship between frequency and wavelength is inverse, the amount of energy carried is also inversely proportional to wavelength.

The link between the energy E and frequency v of a photon is expressed by the equation E=hv, where h is Planck's constant.

In essence, energy is directly proportional to radiation frequency but inversely proportional to wavelength. As a result, energy increases when frequency or wavelength decreases and decreases when frequency or wavelength increases.

To learn more about energy frequency relation from given link

brainly.com/question/13396102

#SPJ4

a lathe rotating at is used to reduce the diameter of an long section of stock metal rod from a diameter of to at a feed rate of . the force measured at the tool post was down and pulling the tool toward the workpart. what is the specific energy of this material?

Answers

If a lathe turning at a feed rate is used to decrease a long section the stock metal rod's diameter from a diameter of to, the material's specific energy M RR = 109.96 cm3/min.

In hydrology, what is specific energy?

At any cross-section section of a canal, measured just above channel bottom, the total energy per cent weight of fluid. Where y is the flow depth, v seems to be the average velocity, & g is gravitational attraction, makes up the formula for specific energy, or E.

What is a substance's particular energy?

The proportion of necessary energy (E) towards the volume of removed material is referred to as specific energy (SE) (V). This variable can be used to calculate how much energy is expended on removing material.

To know more about specific energy visit;

https://brainly.com/question/29829977

#SPJ4

what parameters do hubble's law relate to each other? galaxy rotation speed and luminosity galaxy classification and mass cepheid star period and luminosity galaxy recession velocity and distance galaxy mass and distance

Answers

The fundamental relationship between recessional velocity and distance is known as Hubble's law. The relationship between recessional velocity and redshift, excepting very small redshifts, depends on the cosmological model used.

What can we infer about the connection between distance and recessional velocity from Hubble's law?

One observational consequence of the expansion is that galaxies appear to move away from you more quickly the further they are from you. As a result, the recessional velocity and distance are related. The Hubble's Law is the name of this phenomenon.

What main principle underlies Hubble's law?

In big bang cosmology, the Hubble law postulates that galaxies move away from the Earth at a rate that is proportional to their distance.

To know more about Hubble's law visit:-

https://brainly.com/question/13705068

#SPJ4

Which of the following statements is false? The magnetic field of a current-carrying wiredepends on the magnitude of the current. decreases inversely with the distance from the wire. is directed circularly around the wire. exists only if the current in the wire is changing.

Answers

The magnetic field produced by a conductor that is carrying current relies on the conductor's current and the point's distance from it. The magnetic field runs parallel to the wire in a perpendicular direction.

Given by r = 2 m and B = 5, the magnetic field strength created by a straight wire carrying current is 5. Inquiry 4: As seen in the diagram below, a straight conductor carrying a current of 10A is parallel to another conductor carrying a current of 5A on the other side. Since all closed-loop currents make their own magnetic fields and magnetic fields operating on closed-loop circuits may produce current, magnetism and electricity are closely related. Oersted made the discovery that electric current had a magnetic influence.

To learn more about magnetic field please click on below link

https://brainly.com/question/14848188

#SPJ4

Ms. Johns shows her class a correct model of the solar system. What can the model show that is just like the real solar system?.

Answers

The model will be just like the real solar system when it shows the moon and other satellites revolve around the earth.

Heliocentric model is the most accepted model of the solar system. Heliocentrism is the astronomical model in which the Earth and planets revolve around the Sun at the center of the universe.

The moon and the other satellites revolve around the earth due to the force of gravitation. The moon orbits the Earth once every 27.322 days. It also takes approximately 27 days for the moon to rotate once on its axis. As a result, the moon does not seem to be spinning but appears to observers from Earth to be keeping almost perfectly still. Scientists call this synchronous rotation.

learn more about solar system:

https://brainly.com/question/12075871

#SPJ4

What are elements with 2 electrons called?

Answers

Elements with 2 electrons are called as Group 2 Elements.

As the name says elements with 2 electrons.

Such elements have 2 electrons in their outermost orbit, due to the presence of these 2 electrons in the outermost orbit such elements are not stable.

So, for becoming stable and completing the octet in the outermost orbit the elements need to lose their 2 electrons which are present in the outermost orbit.

Some common examples of such elements is Magnesium, Calcium, and Strontium.

The valency of such elements is 2.

As we know, valency is nothing but the number of electrons which are either lost or taken by the atom for completing their octet.

For more questions on Cations and Anions

https://brainly.com/question/29881978

#SPJ4

Natural rubidium has the average mass 85. 4678 amu and is composed of isotopes rb-85 (mass = 84. 9117 amu) and rb-87. The ratio of atoms rb-85/rb-87 in natural rubidium is 2. 591. Calculate the mass of rb-87.

Answers

The correct response is 86.913 amu for Rb-87's mass.

Two isotopes of the rubidium (Rb) element exist: Rb-85, which has an atomic mass of 84.9117 amu, and Rb-87, which has an atomic mass of 86.9092 amu. Rubidium has an average atomic weight of 85.4678.

Both isotopes have a ratio of 2.591 to 1. Consequently, there is one Rb-87 atom for every 2.591 Rb-85 atoms.

Rb-85 abundance is 2.591/3.591 = 0.722% for 100% naturally occurring Rb, while Rb-87 abundance is 1 - 0.722 = 0.278.

84.9117 × 0.722 + X × 0.278 = 85.4678

X = 24.1618 / 0.278 X = 86.913 amu 61.306 + X 0.278 = 85.4678 X 0.278 = 85.4678 - 61.306 X 0.278 =86.913

To learn more about mass  please click on below link

https://brainly.com/question/26789700

#SPJ4

What is the value of 1 to the power n?

Answers

It's kind of in the definition of what 1 is to say that 1 to the power of anything is 1. You can use complicated powers, but the outcome will always be 1.

How do you calculate n's power?

The simplest method for determining a number's nth power is to multiply it exactly n times. In this situation, we might simply calculate pow(2,-3) = 1/(23), which is the inverse of its positive power.

How is 1 n solved?

Divide both sides by the left-hand integer to create a ratio with the notation 1: n. Divide both sides by the right-hand integer to represent the ratio as n: 1. to check if you're right.

To know more about nth power visit:-

https://brainly.com/question/29216288

#SPJ4

value: 10.00 points The embroyblast eventually differentiates into the O zygote. O blastocyst O primary germ layers. O sperm and egg ReferenceseBook & Resources Multiple Choice

Answers

The zygote has only one cell. The embryo has many cells. A zygote is known as a zygocyte in medicine. A diploid eukaryote is the name given to the embryo. During the zygote's mitosis, an embryo is created.

A stage after the zygote stage is an embryo. Fertilization is the process that creates the zygote. Human blastocyst (day 5), also known as a blastula, is the term used to describe the hollow cellular mass that develops in the early stages of development. The blastocyst is made up of cells that form an inner cell mass (ICM, embryo blast), an exterior trophectoderm (TE, trophoblast) layer, and a blastocoel (fluid-filled cavity). The first week after conception is when the zygote stage develops. The mix of DNA in the zygote's genome is.

To learn more about zygocyte please click on below link

https://brainly.com/question/29769026

#SPJ4

should the speed of the goose be increased or decreased to make the total momentum of the three birds add up to zero? verify your answer by calculating the required speed

Answers

The birds' collective momentum is in the same direction as a goose's, i.e., the right way, but the goose's momentum is more than that of two ducks.

In order to make the goose's overall momentum zero, we employ the idea of momentum to determine the lowered speed.Given that the speed of the goose is greater than the sum of the speeds of the two ducks, it is necessary to decrease the momentum of the goose in order to zero out the overall momentum.P total = Pd + Pd + Pg

       0=-2md vd + mg vg

       2md vd/ mg = v g =2 (40) (1.1) /7.6kg

       vg =1.2m/s

       when total momentum is set to zero.

​For more information on momentum kindly visit to

https://brainly.com/question/24030570

#SPJ1

For what value of lambda are the vectors perpendicular?

Answers

Consequently, if =3, vectors are perpendicular to one another.

Describe lambda.

Greek letter lambda is part of the alphabet.

Lambda is mostly used as a variable in physics to indicate or denote the wavelength of any wave.

Lambda is the term used to describe the radioactive decay constant in nuclear physics and radioactivity.

Lambda is also used to refer to the linear charge density of a uniform line of electric charge in electric fields.

For further information on lambda

Visit

https://brainly.com/question/15728222

#SPJ4

Other Questions
an increase in investment by americans in canada will have which of the following immediate effects? select an answer and submit. for keyboard navigation, use the up/down arrow keys to select an answer. a an increase in the u.s. financial account surplus b a decrease in the u.s. financial account surplus c an increase in the u.s. financial account deficit d a decrease in the u.s. financial account deficit e an increase in the u.s. current account deficit the external and internal circumstances that surround the business are referred as according to the cognitive hypothesis, experiences that occur during periods of rapid personal development followed by periods of stability tend to be easier to remember due to which of the following? Which revision best uses dialogue to improve thesentence?O "Yup, it was a big surprise," I told them. "I'm excitedthat my painting was selected! Especially since I feltso incompetent at the beginning and the competitionwas so ruthless.""Honestly, was surprised," I told them truthfully."The competition was ruthless, and I felt incompetentat the beginning. It's really exciting to have mypainting selected!""I'm in! My painting is in! I feel a fist pump and a littledance coming on, said, grinning. I thought abouthow I felt so incompetent at the beginning becauseof the ruthless competition."Did you hear?" asked them. "My painting gotselected! Exciting, right?" I smiled. "Especially giventhat I felt so incompetent at the beqinning and that the competition was ruthless! What are the uses of vehicle? Which of the following represents a linear inequality in open-sentence form? (Select all that apply.) 2x + 8 = 10y2x - 7y > 10 8 + x > 5 3 < 5 What techniques does Robert Frost use in the road not taken? 3,286-(1,221+217). Suppose that a volcano is erupting and readings of the rate r(t) at which solid materials are spewed into the atmosphere are given in the table. The time t is measured in seconds and the units for r(t) are measured in tonnes (metric tons) per second. Note that r(t) is increasing over the interval [0, 6]. t 0 1 2 3 4 5 6 r(t) 28 18 34 48 54 60 (a) Give upper and lower estimates (in tons) for the total quantity Q(6) of erupted materials after six seconds. (Use six equal subintervals.) lower estimate Q(6) tons upper estimate tons = 016) (b) Use the midpoint rule to estimate Q(6) (in tons). (Use three equal subintervals.) Q(6) = tons Oil leaked from a tank at a rate of r(t) liters per hour. The rate decreased as time passed, and values of the rate at two-hour time intervals are shown in the table. t(h) 0 2 4 6 8 10 r(t) (L/h) 8.6 7.5 6.7 6.4 5.7 5.1 Find lower and upper estimates for the total amount of oil in liters) that leaked from the tank over the interval [0, 10]. (Use five equal subintervals.) lower estimate upper estimate The current in a wire is defined as the derivative of the charge: l (t) = Q (t). (See Example 3 in Section 3.3) What does b l (t) dt represent? which of the following statements regarding sibling relationships in remote rural areas of asia, africa, oceania, and central and south america is true? How many grams of NaCl, m.w. 58.5 daltons, are necessary to make 1 liter of 5% saline? A. 58.5 B.1 C. 6.02 X 10^23 0.2.9 E. 50 Which lines from beowulf help develop the theme that a hero should win glory through acts of bravery? responses. Rick, a computer consultant, owns a separate business (not real estate) in which he participates. He has one employee who works part-time in the business. No ones else works in the business. Which of the following is INCORRECT regarding that business.a. If Rick participates for 400 hours and the employee participates for 420 hours during the year, Rick qualifies as a material participant.b. If Rick participates for 550 hours and the employee participates for 2,000 hours during the year, Rick qualifies as a material participant.c. If Rick participates for 120 hours and the employee participates for 120 hours during the year, Rick does not qualify as a material participant.d. If Rick participates for 95 hours and the employee participates for 5 hours during the year, Rick probably does not qualify as a material participant.e. All of the above teachers' salaries california and new york lead the list of average teachers' salaries. the california yearly average is while teachers in new york make an annual salary of . random samples of teachers from each state yielded the following. california new york sample mean population standard deviation use for the average teachers' salaries in california. at , is there a difference in means of the salaries? which of the following is characteristic of cardiac muscle? cardiac muscle cells achieve tetany with every contraction. cardiac muscle cells are striated. neurons that innervate cardiac muscle tissue are under voluntary control. cardiac muscle fibers are faster than skeletal muscles. cardiac muscle fibers are multinucleated. What are homophones and homonyms write 30 examples of each? Is stockbroker a good career in India? if the court allows someone with a first operating under the influence (oui) conviction to complete an alcohol education course , what happens to the license suspension ? If f(x) is a third degree polynomial function and g(x) = f(2x), which of the following is NOT true?F f(x) and g(x) have the same x-intercepts.G f(x) and g(x) have the same y-intercept.H f(2) = g(1)J f(x) and g(x) have the samenumber of zeros.