The Total heat required to transform 8 kg of liquid water at 33 °C to the ice at 0 °C is 13,019 J.
The heat required to be removed from a liquid to transform it into a solid is called the heat of fusion. For water, the heat of fusion is approximately 334 J/g. To calculate the amount of heat required to transform 8 kg of liquid water at 33 °C to the ice at 0 °C, we'll need to take into account both the heat of fusion and the heat required to lower the temperature of the water from 33 °C to 0 °C.
First, we'll calculate the heat required to lower the temperature of the water from 33 °C to 0 °C. This can be calculated using the formula:
Q = mcΔT
where Q is the heat required, m is the mass of the water (8 kg), c is the specific heat capacity of water (4.186 J/g·°C), and ΔT is the change in temperature (3temperature change
Q = (8 kg)(4.186 J/g·°C)(33 °C) = 10,347 J
Next, we'll calculate the heat of fusion by multiplying the heat of fusion of water (334 J/g) by the mass of the water (8 kg).
Q = (334 J/g)(8 kg) = 2672 J
To sum up, the total heat required to transform 8 kg of liquid water at 33 °C to ice at 0 °C, is equal to the heat required to lower the temperature + heat of fusion which is 10,347 J + 2672 J = 13,019 J
Learn more about heat:
https://brainly.com/question/1429452
A crate of eggs is located in the middle of a pickup truck as the truck rounds a corner in the road. The curve has a radius of 35 m. If the coefficient of static friction between the crate and the truck is 0.600, how fast can the truck move without the crate sliding
The speed of the truck is 14.3m/s without the crate sliding.
What is the equation for static friction?The resistive friction force (Fr) multiplied by the usual or horizontal pressure (N) pushing the things together yields the frictional coefficient (fr), which is a numerical value. The formula fr = Fr/N serves as a representation of it.
Calculation -:Call the mass of the egg crate m. The forces on it are its weight Fg =mg vertically down, the normal force n of the truck bed vertically up, and static friction (fs) directed to oppose relative sliding motion of the crate on the truck bed. The friction force is directed radially inward. It is the only horizontal force on the crate, so it must provide the centripetal acceleration. When the truck has maximum speed, friction fs will have its maximum value with fs=μn.
Newton’s second law in component form becomes
∑Fy=ma(y) giving n−mg = 0 or n = mg
∑F(x)=ma(x) giving f(s)= ma(r)
From these equations
μ(s)n ≤ mv²/r and μ(s)mg ≤ mv²/r
The mass divides out. The maximum speed is then
v≤[tex]\sqrt{}[/tex]μrg =[tex]\sqrt{}[/tex]0.600(35.0m)(9.80 m/s²) = v ≤1 4.3m/s.
To know more about static friction visit :
brainly.com/question/13000653
#SPJ4
Which term is the rate at which work is done?
a. energy
b. power
c. joules
d. force
The rate at which work is completed is indicated by the power word, hence option b is correct. Power, which can be defined as the amount of work done W.
Is the time rate at which the job is completed or energy is given. Energy transferred, expressed as W/t or energy transferred against the time interval t. Work (or energy) per unit time, foot-pounds per minute, joules per second (or watts), and ergs per second are all ways to express power. Work is defined as involving both force applied to the body and displacement of the body. Consider a block that is resting on a horizontal, frictionless floor. A consistent force is acting on this block.
Learn more about force here
https://brainly.com/question/13191643
#SPJ4
Answer: B.) power
Explanation: Get dem hearts up:)
What is the relationship between mass thermal energy transfer kinetic energy and temperature?
The relationship between mass thermal energy transfer kinetic energy and temperature is: When the temperature of an object raises, the average kinetic energy of its particles raises. When the average kinetic energy of its particles raises, the object's thermal energy raises.
The thermal energy in a substance is the whole kinetic energy of all the particles in the substance. If we warm a substance or object, as each particle speeds up, the average speed of the particles (temperature) raises, and accordingly the total speed (kinetic energy) of the particles (thermal energy).
The total of heat transferred is also directly proportional to the mass. To make an equivalent temperature change in a doubled mass, we need to add twice the heat.
Learn more about thermal energy at: https://brainly.com/question/18989562
#SPJ4
true/false
It is possible to view the Moon in first-quarter phase the day after a total lunar eclipse.
False. The Moon will typically appear in a crescent phase the day after a total lunar eclipse.
What is lunar eclipse?
A lunar eclipse is an astronomical event that occurs when the Moon passes directly behind the Earth into its umbra (shadow). During a lunar eclipse, the Earth blocks the light from the Sun from reaching the Moon.
The Moon, in turn, takes on a reddish hue as the Earth's shadow covers it. A lunar eclipse can only occur at Full Moon, when the Sun and Moon are in exact alignment with Earth in the middle. The Moon will usually appear larger than usual during a lunar eclipse, due to the reddish hue it takes on.
To learn about more lunar eclipse
https://brainly.com/question/29734849
#SPJ4
A 2.00-kilogram object weighs 19.6 newtons on Earth. If the acceleration due to gravity on Mars is 3.7 1 m/s^2, what is the object's mass on Mars
The 2.00-kilogram object weighs 19.6 newtons on Earth, its weight on the Mars is 2.00 kg.
The mass is known as the amount of matter which is contained in a body. It is a property which is consistent in a body regardless of the body's current location, gravitational pull and various other factors which exist.
Mass and weight are two separate quantities. Weight is computed as a product of mass and acceleration. Mass has a property to remain constant and it means that whether the object is on any planet, irrespective of that, it will be constant. The mass remains the same that is 2.00 kg.
Learn more about mass:
brainly.com/question/13040516
#SPJ4
1. Calculate the size of the gravitational pull of a sphere of mass 10 kg on a mass 2.0 kg. When their
centres are 200 mm apart. What is the force of the 2.0 kg mass on the 10 kg mass?
Please answer with an explanation if you can!!!
Explanation:
Let a be the sphere of mass 10 kg and b be the sphere of mass 20 kg. According to Newton's universal law of gravitation, the gravitational force of a on b is expressed as:
F
a
b
=
G
m
M
d
2
, where:
G
=
6.67
×
10
−
11
N
m
2
/
k
g
2
is the gravitational constant
m = 2 kg is the mass of a
M = 10 kg is the mass of b
d = 0.2 m is the separation between the two spheres
So:
Fab=GmMd26.67
×
10
−
11
×
2
×
10
0.2
2
How far do you have to move the moon so the force of gravity on it doubles?
The gravitational attraction between two objects grows in strength with each object's mass. The gravitational force between two objects doubles when one of the objects' masses doubles.
Is gravity 9.8 meters?The acceleration that gravity imparts to objects falling freely is used to quantify gravity. At the surface of the Earth, gravity accelerates at a rate of around 9.8 meters (32 feet) per second. As a result, an object in free fall accelerates by 9.8 meters per second for every second that it is falling.
Is the gravitational field constantly 9.8 N kg strong?The gravitational field strength of the Earth is 9.8 N/kg. Accordingly, an item will feel 9.8 N of force for every kg of mass. That weight of a thing is lower if the gravitational field is weaker. The Moon, for instance, has a gravitational field that is 1.6 N/kg strong.
To know more about gravity visit:
https://brainly.com/question/14874038
#SPJ1
What is the role of diffusion in the dialysis process?
A concentration gradient drives the ion-exchange membrane (IEM) separation procedure known as diffusion dialysis (DD).
Diffusion dialysis is referred to be a spontaneous separation technique since the concentration gradient primarily drives the separation process. A membrane separation procedure is DD.
Diffusion is the movement of a solute along a concentration gradient through a membrane. Small molecules are eliminated in this manner during hemodialysate. Diffusion is the net transfer of a substance from a location of high concentration to a region of low concentration, according to physicists and chemists.
Diffusion in hemodialysis is formally defined as the transport of solutes as a result of random molecular motions down its concentration gradient through a semipermeable membrane. Diffusion is how most toxins are removed during dialysis.
To know more about diffusion dialysis
https://brainly.com/question/28502435
#SPJ4
Classify the phase-change scenarios according to the direction of the heat flow in each case. No net transfer of heat occurs Heat is transferred from the water to the surroundings Heat is transferred to the water from the surroundings
When working through these problems, think about the heat in terms of movement of the molecules of water.
Heat is transferred from the water to the surroundings --- water molecules slowing down.
Heat is transferred to the water from the surroundings --- water molecules heating up.
a cloud of steam condenses into liquid water - Heat is transferred from the water to the surroundings. Steam has more molecules moving around than liquid water. Therefore the molecules had to slow down, thereby transferring heat to the surroundings.a block of ice sublimates into water vapor - Heat is transferred to the water from the surroundings --- water molecules are heating upa block of ice melts - Heat is transferred to the water from the surroundings. The water molecules are basically not moving. Therefore heat has to be introduced to the molecules, which causes the melting.a puddle of water evaporates - Heat is transferred to the water from the surroundings. The water molecules are moving in the liquid state. However, when more heat is introduced to the liquid, the molecules move more rapidly and evaporate.a puddle of water freezes into ice - Heat is transferred from the water to the surroundings --- water molecules slowing down as they go from a liquid state to a solid state. ABOUT HEAT TRANSFERHeat transfer is the transfer of energy due to the difference of temperature between two different places. The main discussion in heat transfer is how the energy in heat can move places and the rate of transfer under certain conditions. Heat transfer includes the processes of inflow and outflow of heat. In industrial processes, heat transfer is used to achieve the required temperature in the industrial process and maintain the required temperature throughout the process.
Heat transfer from one object to another can occur by conduction, convection, and radiation. The determinant of heat transfer is the temperature difference. The direction of heat transfer starts from a medium with a high temperature to a medium with a lower temperature. Heat transfer can occur with a single process or multiple processes.
Learn more about heat transfer at https://brainly.com/question/13433948.
#SPJ4
Two ropes are tied to a steel ring, and a student holds the free end of each rope. The students then pull on the ropes in a tug-of-war. If the forces exerted by the students are unbalanced, what happens to the ring ?
A. The ring remains at rest.
B. The ring moves at a constant velocity.
C. The ring accelerates in the direction of the net unbalanced force.
D. The ring accelerates in the direction opposite the net unbalanced force.
The ring accelerates in the direction of the net unbalanced force. Thus option C is the correct answer.
According to Newton's second law of motion, the net force acting on an object is equal to the mass of the object multiplied by its acceleration. If the forces exerted by the two students in the tug-of-war are unbalanced, there will be a net force acting on the steel ring.
The direction of this net force will be in the direction of the stronger force. As a result, the ring will accelerate in the direction of the net unbalanced force. This means that the ring will begin to move, and its velocity will change as long as the net force is applied.
Since the steel ring is accelerating, it can no longer be at rest, and it will not move at a constant velocity. The ring will move in the direction of the stronger force until the forces exerted by the students are balanced again.
To learn more about Force,
https://brainly.com/question/28012687
#SPJ4
In designing rotating space stations to provide for artificial-gravity environments, one of the constraints that must be considered is motion sickness. Studies have shown that the negative effects of motion sickness begin to appear when the rotational motion is faster than approximately 1.65 revolutions per minute. On the other hand, the magnitude of the centripetal acceleration at the astronauts' feet should equal the magnitude of the acceleration due to gravity on earth. Thus, to eliminate the difficulties with motion sickness, designers must choose the distance between the astronaut's feet and the axis about which the space station rotates to be greater than a certain minimum value. What is this minimum value
This minimum value is 223.9 m.
The attribute of motion of an item travelling a circular path is characterised as centripetal acceleration. Centripetal acceleration is defined as any item travelling in a circle with an acceleration vector pointing towards the centre of that circle.
The acceleration felt when moving in a uniform circular motion is known as centripetal acceleration. It always points toward the rotational centre. It is parallel to the linear velocity. The centripetal force is measured in an inertial frame of reference, whereas the centrifugal force is measured in a non-inertial frame of reference. Centripetal force is directed towards the axis of rotation or the centre of curvature, whereas centrifugal force is directed away from the circle's centre.
To learn more about centripetal acceleration, here
https://brainly.com/question/14465119
#SPJ4
The tape in a videotape cassette has a total length 196 m and can play for 2 h. As the tape starts to play, the full reel has an outer radius of 48 mm and an inner radius of 14 mm. At some point during the play, both reels will have the same angular speed. What is this common angular speed
Both reels will rotate at the same pace at some time throughout the game. This usual angle of rotation is 0.763 rad/s.
Given data:
The total length of the videotape cassette is, L = 196 m.
The time interval for the play is, t=2h=2×3600=7200s
The outer radius of the tape is, r₀ = 48mm
The inner radius of the tape is, r[tex]_{i}[/tex] = 14mm
The rotating motion of the videotape is indicated by the value of the angular velocity, which is as follows:
[tex]\omega=\frac{v}{r}[/tex].............................................................................(1)
Here, v denotes the cassette's linear speed, while r denotes the cassette's effective radius.
r=[tex]\sqrt{ \frac{r_{o}^{2} + r_{i}^{2} }{2} }[/tex]
r= [tex]\sqrt{ \frac{48^{2} + 14^{2} }{2} }[/tex]
r=35.35 mm
r ≅ 0.03535 m
And the cassette's linear speed is specified as,
[tex]v=\frac{L}{t}[/tex]
[tex]v[/tex] = 196/7200
[tex]v[/tex] = 0.027 m/s
Substitute the values in equation (1) as
[tex]\omega[/tex] = 0.027/0.03535
[tex]\omega[/tex] = 0.763 rad/s
As a result, we can infer that at some point throughout the game, both reels will be spinning at the same speed of 0.763 rad/s.
The angle of rotation in mathematics is a measurement of how much, specifically by what angle, a figure is rotated about a fixed point, frequently the center of a circle. Since an anticlockwise revolution of 310 degrees is equivalent to a full turn of 360 degrees because 310 degrees plus 50 degrees equals 360 degrees, an anticlockwise rotation of 310 degrees is also referred to as a rotation of -50 degrees.
Learn more about angle of rotation here:
https://brainly.com/question/29779210
#SPJ4
A 50 kg person and a 70 kg person are sitting on a bench close to each other about .5 m apart.
Estimate the magnitude of the gravitational force each exerts on the other.
Answer:
1.0 x 10-6 N.
Explanation:
The gravitational force
Fg = G m1 m2 / r2 = (6.673 x 10-11) (50 kg) (75 kg) / (0.50 m)2 = 1.0 x 10-6 N.
How much energy is released when 110 g of steam condenses?
Answer:
To determine the amount of energy released when 110 g of steam condenses, we can use the latent heat of vaporization formula, which states that the energy released is equal to the mass of the steam multiplied by the latent heat of vaporization. The latent heat of vaporization of water is 2256.7 J/g, so the energy released would be equal to 110 g x 2256.7 J/g = 248230 J. This value can be converted to kilojoules by dividing it by 1000, resulting in approximately 248.2 kJ.
It is important to note that the specific heat capacity and the change in temperature are not required to calculate the energy released during the condensation of steam. Instead, we only need the mass of the steam and the latent heat of vaporization. The latent heat of vaporization is a measure of the amount of energy required to change the state of a substance from a vapor to a liquid at a constant temperature, and it is specific to each substance.
Explanation:
A baseball has a momentum of 6.0kg*(m)/(s) south and a mass of 0.15kg. What is the baseball's velocity?
A baseball weighs 0.15kg and has a south momentum of 6.0kg m/s. The speed of the baseball was (v) = 40 m/s south.
It's a physical magnitude that measures the product of the mass by the velocity of a particle. Its units in the International System is kg. m/s and the formula is
p = mv
where
m is the mass of the object
v is its velocity
In this problem, we know:
p = 6.0 kg m/s is the momentum of the baseball
m = 0.15 kg is its mass
Therefore, we can re-arrange the equation to find the baseball's velocity:
v = p/m
v = 6.0/0.15
v = 40 m/s south
Learn more about velocity problems
https://brainly.com/question/28320861
What is the tangential speed of a passenger on a Ferris wheel that has a radius of 42 m and rotates once in 25 sec
Where r is the radius, v is the tangential speed, and is the angular speed The tangential speed is 2.1 m/s as a result.
Any object traveling in a circular motion has a linear speed known as tangential velocity. On a turntable, a point in the center moves less distance in a full rotation than a point near the outside edge. Tangential speed and tangential velocity are not the same thing. The amount of tangential velocity, which is generally referred to as velocity, is what you are referring to. Technically, the nomenclature is incorrect, and speed is actually its magnitude whereas tangential velocity comes with the direction, a.The circle's circumference divided by the duration required for one complete spin gives us the tangential velocity: 2*pi*r/t. The relationship between it and angular velocity is also shown by the formula V = w * r, w.To know more about tangential velocity here
https://brainly.com/question/19660334
#SPJ4
how to say hi in french
Explanation:
Bonjour
it is hi or hello you can also say the name after
Example:Bonjour(say the name of the person you want to greet)
Answer:
Bonjour
Explanation:
Its just bonjour, you could always expand and say more then just Hi though.
Is it possible to whirl a bucket of water fast enough in a vertical circle so the water won't fall out if so, what is the minimun speed
Yes, it is possible to whirl a bucket of water fast enough in a vertical circle so the water won't fall out.
The minimum speed required to do this is known as the “Centrifugal Force Limit” and is calculated based on the size and shape of the bucket and the weight of the water. Generally, a speed of at least 20-30 revolutions per minute is required to keep the water from spilling out.
F = (m * v^2) / r
Where:
F = centrifugal force (N) m = mass of water (kg) v = linear velocity (m/s) r = radius of the circle (m)Learn more about speed:
https://brainly.com/question/27888149
#SPJ4
You're in the back of a friend's pickup truck when it stalls on a hill. You jump out, get behind the truck and push with all your might (300 N) in a vain attempt to keep the truck from accelerating down the hill. The force the truck exerts on you is: less than 300 N 300 N greater than 300 N
The force the truck exerts on you is 300 N.
What is meant by force?
A force in physics is an effect that has the power to alter an object's motion.Intuitively, a push or a pull can also be used to describe force.Being a vector quantity, a force has both magnitude and direction. The SI unit of newton is used to measure it (N). The letter F stands for force (formerly P).According to Newton's second law's original formulation, an object's net force is equal to the speed at which its momentum is changing over time. According to this law, an object's acceleration is inversely proportional to the net force acting on it, is in the direction of the net force, and is directly proportional to the mass of the object if its mass is constant.To learn more about force refer to
https://brainly.com/question/12970081
#SPJ4
What is the spring constant of a spring of negligible mass which gained 8 joules of potential energy as a result of being compressed 0.4 meter
Answer:
[tex]100N/m[/tex]
Explanation:
The formula to find the spring constant given the potential energy and sprint displacement is:
[tex]E=\frac{1}{2} kx^{2}[/tex]
where:
[tex]E[/tex] is the energy ( in Joules)
[tex]k[/tex] is the constant ( in Newtons per meter)
[tex]x[/tex] is the extension ( in meters)
thus, by rearranging the formula we can get:
[tex]k=2\frac{E}{x^{2} }[/tex]
[tex]k=2\frac{8}{0.16}[/tex]
[tex]k=2*50=100N/m[/tex]
A 1.5 kg ball falls onto a floor. Just before it strikes the floor, its velocity is 12 m/s. The ball bounces up with a velocity of 10 m/s. Find the impulse on the ball.
Answer:33Ns
Explanation:
A 14 N force to the right keeps a 72 N normal force mass at constant
velocity on a horizontal surface. What is the coefficient of kinetic friction
between the surface and the mass?
The coefficient of kinetic friction between the surface and the mass is 0.1944.
What is kinetic friction?A force that acts between moving surfaces is referred to as kinetic friction. A force acting in opposition to the direction of a moving body on the surface is felt. The two materials' coefficient of kinetic friction will determine how much force is applied.
The ratio of the normal force to the kinetic friction force generated by contacting surfaces is known as the coefficient of kinetic friction.
Hence, The coefficient of kinetic friction between the surface and the mass is = 14 N/72 N
= 0.1944
Learn more about kinetic friction here:
https://brainly.com/question/19180015
#SPJ1
at the top of a pole vault, an athelete actually can do work pushing on the pole before releasing it. suppose the pushing force that the pole ecerts back on the athelete is given by F(x)=(1.5*10^2N/m)x-(1.9*10^2N/m^2)x2 acting over a distance of 0.20m. how much work is done on the athelete?
2.49 Joules have been performed on the athlete, in accordance with the provided statement.
What in science is a force?In science, the word "force" has a concrete meaning. At this point, referring to a force as a push or simply a yank is perfectly appropriate. An constituent does not "have in it" or "contain" a factor. A force is felt by one entity coming from another. The idea of a force encompasses both living and non-living entities.
You must incorporate the work expression because it is a vital part of Fdx.
Gained is
W = integral of ( 150x - 190 x 2 ) dx
= 75 x2 - 63.333 x3
So now...
work done = 75 *0.202 - 63.333 *0.203 = 2.49Joules
To know more about Force visit:
https://brainly.com/question/13191643
#SPJ4
If you pound a feather with a hammer, which one feels a greater force? a. always the hammer both feather moves, then it felt the greater force. b. therwise the force the same on both. c. always the feather d. The size of the force is always exactly the same on both of them.
If you pound a feather with a hammer, which one feels a greater force always the hammer both feather moves, then it felt the greater force.
What is the force?
Force is an influence that produces a change in the motion of an object. It is measured in units of mass times acceleration, or newtons (N). Force is a vector quantity, meaning it has both magnitude and direction. Force can cause an object to accelerate, decelerate, remain in motion, change direction, or alter shape. Examples of forces include gravity, friction, tension, and magnetism. Forces can also be generated by electrical, thermal, and nuclear energy. All forces are generated by the interaction of two objects and can be balanced or unbalanced. Unbalanced forces will cause an object to move or accelerate and balanced forces will cause an object to remain stationary or in motion at a constant speed.
To learn more about force
https://brainly.com/question/12785175
#SPJ4
If a non-rotating object has no acceleration, then we can say for certain that it is A) in mechanical equilibrium. B) moving at constant non-zero velocity. C) at rest. D) all of the above E)none of the above
(A) in mechanical equilibrium is correct option, as there is no net force acting on it. A non-rotating object that has no acceleration can be said to be in mechanical equilibrium.
What is the definition of mechanical equilibrium?Mechanical Balance When all forces acting on an object of interest are equal to zero, mechanical equilibrium has occurred. The balance of all the forces must exist for this to occur.
What distinguishes mechanical equilibrium from static equilibrium?A reversible reaction is in a stable state called dynamic equilibrium when the rate of the forward reaction equals the rate of the backward reaction. The reaction has come to an end when there is static equilibrium, sometimes referred to as mechanical equilibrium. Or to put it another way, the system is idle.
Can mechanical equilibrium exist for an object in motion?When an object's acceleration is equal to zero, it is said to be in mechanical equilibrium. The object is either at rest with no change in position over time or it is traveling at a constant pace in this state. The net force acting on the object is equal to zero since the acceleration is zero.
To know more about acceleration visit:
https://brainly.com/question/460763
#SPJ4
Complete this sentence. If the cone of force is facing an observer, the impact comes from the ________ side of the observer.
left
same
right
opposite
If the cone of force is facing an observer, the impact comes from the opposite side of the observer.
What is Newton's third law of motion?
Newton's third law of motion states that action and reaction force are equal and opposite. That is for every action, there is an equal and opposite reaction.
Mathematically, the formula for Newton's third law of motion is given as;
Fa = - Fb
where;
Fa is the impact force or force exerted on BFb is the reaction force of B due to applied force of AThus, when a force is applied from a side, the observed force or reaction will be directed in opposite direction. The force exerted and the reaction force are both equal in magnitude but occurs in opposite direction.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
What is the amount of torque produced if the angle between the force and the lever arm is zero?
The amount of torque produced if the angle between the force and the lever arm is zero is zero.
The formula for torque is:
Torque (τ) = Force (F) x Lever arm (r) x sin(θ)
This is because torque is defined as the product of force and the perpendicular distance from the line of action of the force to the axis of rotation. When the angle between the force and the lever arm is zero, the force is acting parallel to the lever arm, meaning that there is no perpendicular distance between the force and the axis of rotation, resulting in a torque of zero. In other words, the torque is zero when the force is applied in the same direction as the lever arm.
To know more about Torque click below:
brainly.com/question/6855614#
#SPJ4
30kg Michaela is swinging on a swing. Her total mechanical energy is 600 J. At what height will she be when she has a velocity of 2 m/s?
Please show all work!
40 points!!
Answer:
1.84 m
Explanation:
ME = KE + PE = 1/2mv² + mgh
600 J = 1/2(30 kg)(2 m/s)² + (30 kg)(9.8 m/s²)h
Solve for h:
600 J = 60 J + (294 kg·m/s²)h
h = 540J/294kg·m/s² = 1.84 m
Draw the phasor for the emf = (170 V) cos ((2pi*60 Hz)t) at t = 60 ms. Tail at the origin.
Answer:
9798687564=-=-=97858
Explanation:oy 8gyf86 r = 76y
Every year, new records in track and field events are recorded. Let's take a historic look back at some exciting races. On August 20, 1989, in Cologne, West Germany, Said Aouita of Morocco also established a world record when he ran the 3000. m run in 7 minutes, 29.45 seconds. What was his average speed (in m/s) for the race
Said Aouita's average speed for the race was 12.089 m/s. To calculate this, we need to divide the total distance (3000 meters) by the total time (7 minutes and 29.45 seconds).
Converting the time to seconds, we get 449.45 seconds.
Therefore,
3000 / 449.45 = 12.089 m/s.
This is an impressive speed for a 3000 m race and it was a new world record at the time. Aouita was the first runner to break the eight minute barrier in the 3000 m, a feat he accomplished in 1987. His world record lasted for almost 3 years until it was broken by Moses Kiptanui in 1992. Aouita's world record is a testament to his incredible speed and endurance.
Learn more about speed:
https://brainly.com/question/26046491
#SPJ4