Answer:
I got 2508 J
Explanation:
q=mct
125-95
= 30 * 4.18 * 20
= 2508
You have just learned that the planet core of Mars is no longer radiating heat like the core of Earth. With this information what would you communicate to building designers as the lead geologist in regards to suitable building locations on the surface of Mars? Remember your informing builders about locations that would best avoid natural disasters like marsquakes and volcanoes? What evidence or theories do you have to support your statements?
Answer:
Explanation:
That is a fun question!
Without a hot radiating core like Earth, Mars will have very different geological and seismic events. The Mars core will be relatively cold and there will not be any molten magma. So Mars will not have earthquakes or volcano activities. Both only occur when there is magma flowing or tectonic plate motion and they will not occur with a cold core.
HELP PLEASE
A virtual image is produced by a convex mirror that is 1.60 cm from the mirror. If the magnification is 0.20, how far from the mirror is the object?
The distance of the object from the mirror Is = –8 cm
Calculation of the object distance of a mirrorThe image distance from the mirror = –1.60cm
The magnification of the image = 0.20
The distance of the object from the mirror can be calculated using the formula below:
magnification= – image distance/ object distance
Substitute the available values into the equation above,
0.20 = – 1.60/ X
Make X the subject of formula,
X = – 1.60/0.20
X = – 8cm
The negative sign indicates that the image is virtual which is formed behind the mirror.
Therefore, the distance of the object from the mirror Is = –8 cm.
Learn more about mirror equations here:
https://brainly.com/question/26257987
Does Anybody Know The Answers?
Answer:
I was going to give you the paper where I saw it but since you are not giving enough points I can not give you so I am only going to give you some of these that are here sorry
Explanation:
1.
[tex]9^{2} + 12^2 = x^2\\81 + 144= x^2\\\sqrt{225} = \sqrt{x} \\ 15=x\\\\ 2.\\x^2+12^2+=13^2\\x^2+144 =169\\x^2 = 25\\\sqrt{x^2 =\sqrt{25\\\\[/tex]
x=5
[tex]3.\\12^2+32^2 = x^2\\34.176= x[/tex]
7.
5,12,13
9.
[tex]\frac{x}{4} ,\frac{12}{4} ,\frac{20}{4}\\\\\frac{x}{4},3,5 \\\\x=16\\\\12. \\x^2 + 48^2=50^2\\\\x^2=196\\x=14[/tex]
22. White noise is ...
a very loud sound
a single frequency at the same time
a very quiet sound
a whole bunch of frequencies at the same ttim
23: what does the law of conservation of energy state?
both of these
neither of these
energy can be created
energy can be destroyed
Answer:
white noise is a bunch of frequencies at the same time :)
Explanation:
Write a short narrative from the perspective of a mineral moving through the rock cycle. The mineral must undergo at least four changes.
Answer: Mineral and non- mineral components circulate in the environment in different forms whether it is in the form of solid, liquid, or gas.
Explanation:
Plants take up the minerals like calcium, potassium, nitrogen, sulphur, and others from the soil and utilize them for their survival and growth. These minerals are stored in the flowers, leaves, roots, and other plant parts and these plant parts are consumed by humans and animals. So, inorganic minerals from the soil are converted into organic forms by the plants again the minerals are decomposed into inorganic forms after the death of organisms and again mineral is converted into inorganic form in the soil and these minerals can become the component of the rocks after the sedimentation of the soil.
(marking brainliest) pease help asap! both of the questions are in the pdf, and please let me know which is question one and which is question two, ty!
1) The relationship in between the electrical energy carriesd by the transmission wires and the amount of the heat loss in it is due to the reason that when the electricity is flown through the wires there are some resistance found in these wires which creates a disturbance in the efficient flow of electricty.Also we know that current have an heating effect when it is in motion as due to if a large amount or magnitude of electricity is flown through the transmission wires it will carry a larger heat effected and also due to the resistance is provided by the wires and so the process of heat loss takes place.
2)It is important to minimize current in transmission wires due to minimize the heat loss and resistance on flowing electric current to make the system more efficient
3)Given Resistance = 250 ohms
Electric potential = 150 volts
so we know Power =
volt^2/Resistance =
=(150^2/250)(ohms/volts)
=(22500/250)watt = 90 watt
4)Heat energy (H) = Power(P)×Time(t)
4)Heat energy (H) = Power(P)×Time(t)= (90×2)joules = 180 joules
Hope it helps
A voltage source provides ____ required for electric current. A. the electrons B. the potential difference C. the resistance D. the pathway
(reply with an answer to the question or get reported) Please solve it with the steps ty
Answer:
vertical force=50
horizontal force=35
Nathan is walking to the store and sees a snake slithering across the sidewalk. He jumps over it with an initial vertical velocity of 10 ft/s. How long does it take for Nathan to land back on the ground
Answer:
[tex]0.62\:\mathrm{s}[/tex]
Explanation:
Since the universal SI unit for velocity is meters/second, let's convert ft/s to m/s:
[tex]10\:\mathrm{ft/s}=3.048\:\mathrm{m/s}[/tex]
We can use the following kinematics equation to solve this question:
[tex]v_f=v_i+at[/tex]
What we know:
The initial velocity, [tex]v_i[/tex], is [tex]3.048\:\mathrm{m/s}[/tex] (physics concept) The final velocity must be equal in magnitude but opposite in direction to the initial velocity ([tex]v_f=-3.048\:\mathrm{m/s}[/tex]) Acceleration, [tex]a[/tex], is acceleration due to gravity at about [tex]9.8\:\mathrm{m/s}[/tex]Solving for [tex]t[/tex]:
[tex]-3.048=3.048+(-9.8t),\\-6.096=-9.8t,\\t=\frac{-6.096}{-9.8}\approx \boxed{0.62\:\mathrm{s}}[/tex]
Do any of y’all know the answer to this? Please help, I’ve been stuck on this question forever
Answer:
I think it's B , maybe wrong tho....
Need help asap! you are the star soccer player and you are late to your game. Everyone is happy to see you and wants you to jump in and play. The safest thing to do in this situation is to
avoid the coach since you were late
go back home to avoid injury and ridicule
jump in and play to make up for being late
warm up your muscles before playing
Answer:
c and d
what i would do is ask the coach if you could take a minute to stretch and as soon as posible jump into the game
Explanation:
i play soccer lol
Answer: i'm pretty sure its warm up your muscles before playing
Explanation:
if you don't u get hurt.
PLS HELP. URGENT.
I WILL MARK HIM/HER AS BRAINLIEST.
Answer:
Explanation:
frequency=1/time period
50=1/time
time=1/50
time=0.020 s
Answer: A
Explanation:
Suppose the height of object is +3cm and height of image is -12 cm. What is its magnification?
Answer:
magnification is 4
Explanation:
m= image height / object height
m= 12/3
m= 4
A spring with a spring constant of 2.5 N/m is stretched by 0.2 m. What is the potential energy in the spring
Answer:
Explanation:
PE = [tex]\frac{1}{2}k[/tex](Δ[tex]x^2[/tex])
where k is the spring constant and Δx is the displacement of the spring when an object is hung from it. Plugging in:
[tex]PE=\frac{1}{2}(2.5)(.2^2)[/tex] which gives us
PE = .05 J
What wave phenomena best describes the reason for the dark and light bands that
appear on the optical screen during the double slit experiment?
Answer:
Interference
Explanation:
Interference is the phenomenon in which two waves superimpose to form a wave with smaller, larger or same amplitude.
There are two types of interference namely, constructive interference and destructive interference.
Constructive interference occurs when the waves are in phase and destructive interference occurs when the waves are out of phase.
In a double slit experiment, the two slits acts as sources of light and thus the waves combine to produce interference patterns. When the waves are in phase, that is the angle between them is 0°, they form a constructive interference pattern which gives rise to a light band. When the waves are out of phase, that is the angle between them is 180°, they form a destructive interference pattern which gives rise to a dark band.
Note also that diffraction patterns are also observed for wide slits but can be neglected for smaller slits.
a bag of sugar is found to have the same weight on planet earth as an identical bag of dry sawdust on planet Jupiter explain why the masses of the two bags must be different
Answer:
Because Jupiter is a much larger planet than Earth, its gravitational pull is 240% stronger than that of earth. This is why sawdust, which is lighter than its equivalent measure of sugar would weigh more on Jupiter.
Explanation:
Let's assume that a type of bag can contain 50 kilograms of sugar. If that same bag was filled up with sawdust instead, it would weigh far less than 50Kg.
If that bag of sawdust, on earth weighed 35Kg for instance, on Jupiter, the new weight would be:
35Kg x 2.4 = 84Kg
Put differently, Jupiter simply has a stronger gravitational pull than earth. This extra pull is attributed to its size.
Cheers
The distance between two successive crests of a certain transverse wave is 1.40 m. Eight crests (7 waves) pass a given point along the direction of travel every 15.0 s. How fast are the waves traveling
Answer:
the speed of the wave is 0.65 m/s
Explanation:
Given;
distance between two successive crests, λ = 1.4 m
number of crests, n = 8
number of waves formed = 7
The total distance covered by the wave, d= 7λ = 7 x 1.4 = 9.8 m
time of motion of the wave, t = 15 s
The speed of the wave is calculated as;
V = d/t
V = 9.8 / 15
V = 0.65 m/s
Therefore, the speed of the wave is 0.65 m/s
A cyclist rides at an average speed of 1.9 m/s for 3h 30min. How many kilometers does he travel
A portion size is always equivalent to the serving size listed on the label. A. True B. False
Answer:
Hi, there your answer is False
Explanation:
Two forces of 8N and 10N CANNOT give a resultant of
a. 1 N
b. 2 N
c. 9 N
d. 18 N
Answer:
Answer is gonna be B. 2N
This is the Answer for your question :3
I hope you are having a great day ❤️❤️❤️❤️
The resultant force is indeed the single force and corresponding tension derived by vector addition when combining any system of torques acting on a solid body.
Its associated torque is generated mostly by the time of filing the compliance.The Pythagorean theorem is being used to determine the resulting force whenever one force acts perpendicularly to another. Calculating the resultant force which not includes force: [tex]\to 10-8= 2\ N[/tex]Therefore, the final answer is "Option b".
Learn more:
brainly.com/question/23869482
Planets in the solar system revolve around the Sun in an orbital path and can vary from rocky and terrestrial objects to gaseous and liquid object. Which set of characteristics is unique to the outer planets
Answer:
Gaseous; liquid.
Explanation:
A planet can be defined as a large celestial body having sufficient mass to allow for self-gravity and make it assume a nearly circular shape (hydrostatic equilibrium), revolves in an orbit around the Sun in the solar system and has a cleared neighborhood.
Some examples of the planet are Mars, Venus, Earth, Mercury, Neptune, Jupiter, Saturn, Uranus, Pluto, etc.
Basically, the planets are divided into two (2) main categories and these includes;
I. Inner planets: these planets are the closest to the sun and comprises of mercury, venus, earth and mars.
II. Outer planets: these planets are beyond the asteroid belt and comprises of jupiter, saturn, uranus and neptune, from left to right of the solar system.
These outer planets are made mostly of gases (hydrogen and helium) causing them to be less dense than the solid inner planets. These gases are generally known to be less dense in terms of physical properties.
In conclusion, Planets in the solar system can vary from rocky and terrestrial objects to gaseous and liquid object.
However, the set of characteristics which is unique to the outer planets are gaseous and liquid.
A 6.93*10-4 C charge has a
potential energy U = -3.09 J at a
point in space. What is the electric
potential V at that point?
Include the sign, + or -
(Unit = V)
Answer:
P = V * Q potential energy = potential * charge
V = =3.09 J / 6.93 * 10E-4 C = 4460 Joules / Coulomb
The electric potential, V at the point given the data from the question is –4458.87 V
What is electric potential?The electric potential or electromotive force (EMF) is defined as the energy supplied by a battery per unit charge. Mathematically, it can be expressed as:
Electromotive force (EMF) = Work (W) / charge (Q)
V = EMF = W / Q
How to determine the Electric potentialwork (W) = –3.09 JCharge on electron = 6.93×10⁻⁴ CElectric potential (V) =?V = W / Q
V = –3.09 / 6.93×10⁻⁴
V = –4458.87 V
Learn more about electric potential:
https://brainly.com/question/820393
#SPJ2
A student uses the circuit shown to determine the resistance of two identical resistors.
H--
А.
V
The voltmeter reading is 2.2V and the ammeter reading is 0.25A.
What is the resistance of each resistor?
A 0.2752
B
0.552
C 4.4Ω
D
8.82
Answer:
B. 0.552
Explanation:
To find the resistance in the circuit above, u simply divide the current in the circuit by the voltage to get the resistance.
A 3 kg book is at rest on the table. What is the magnitude of the normal force that the table is exerting on the book?
Answer:
30 N
Explanation:
The normal force is the component of a contact force that is perpendicular to the surface that an object contacts. This normal force prevents the surfaces from penetrating each other.
Let us assume that the acceleration due to gravity (g) is 10 m/s². Hence the weight of the book (W) is:
W = mass of book * acceleration due to gravity = 3 kg * 10 m/s² = 30 N
The normal force ([tex]F_n[/tex]) is gotten using:
Summation of vertical force = m[tex]a_y[/tex]
[tex]F_y=ma_y\\\\F_n-mg=0\\\\f_n=mg=3kg(10m/s^2)=30\ N[/tex]
a 5 kg block is on a frictionless surface. A 15 N force is applied to the block in a direction parallel to the surface. what is the acceleration of the block?
A. 3 m/s^2
B. 10 m/s^2
C. 20 m/s^2
D. 75 m/s^2
Answer:
D 75
Explanation:
I'm pretty sure it's just 5x15=75
Answer:
the answer would be 3/s^2
Explanation:
because all u have to do is divide 15 by 5 and u would get 3
help me calculate the kinetic energy (just the middle column) ASAP! SHOW WORK! ON PAPER
Answer:
Explanation:
I can tell you what the answers for the middle column are, but if you don't know how to solve total energy problems, they won't make any sense to you at all.
First row, KE = 0
Second row, KE = 220500 J
Third row, KE = 183750 J
Fourth row, KE = 205800 J
That's also not paying any attention to significant digits because your velocity only had 1 and that's not enough to do the problem justice. I left all the digits in the answer. Round how your teacher tells you to.
Lamar is testing several solutions to identify which ones are acids, which ones are bases, and which one is water. He hypothesizes that solution number 3 is water. For Lamar’s hypothesis to be supported by his data, which of the following pH values must solution number 3 be near? SC.8.N.1.3
A
1.0
B
9.0
C
7.0
D
12.0
I NEED HELP PLEASE HELP ME
A 2400 Kg Space Capsule is on the moon. What is its weights on earth ?
Answer:
24000N
Explanation:
The mass of the object stays the same, regardless of its gravitational field strength. But, weight=mass*gravitational field strength.
So, the gravitational field strength on Earth is 10N. 2400*10=24000.
hope this helps
How does a circuit breaker protect a refrigerator?
Answer:
When the circuit breaker trips and turns off, it can shut off power to the appliance. This not only protects your home from damage, but it also protects the appliance itself.
Explanation:
What is a circuit breaker. A circuit breaker is an electrical switch designed to protect an electrical circuit from damage caused by overcurrent/overload or short circuit. Its basic function is to interrupt current flow after protective relays detect a fault.
Can someone help please
Ans: The velocity of the bobsled at the bottom of the hill is = 57.7 [tex]\frac{m}{s}[/tex]
Explanation: (see image attached)
Hope this helps! Good luck with future work! :)