How many neutrons are in the nucleus of an atom of 118/50 Sn?

Scientists discovered Pangaea because continuous margins can be articulated as a puzzle, which is consisted of the theory that they were once part of the same landmass.

The idea of Pangaea as an original supercontinent landmass refers to the once that all continents on Earth were part of the same continent that separated and tectonic plates diverged over time.

Therefore, with this data, we can see that idea of Pangaea indicates the presence of a supercontinent over the geological past.

Learn more about the Pangae supercontinent landmass here:

https://brainly.com/question/13705979

#SPJ1

In the given reaction:

2H₂ + O₂ --> 2H₂O

Hydrogen is oxidized, and oxygen is reduced.

The oxidation state of hydrogen changes from 0 to +1 in H₂O. Hence, hydrogen is oxidized. The oxidation state of oxygen changes from 0 to -2 in H₂O. Hence, oxygen is reduced. Oxidation means increase inn oxidation number and reduction means decrease in oxidation number. now here in this reaction hydrogen and oxygen being in molecular state has by default oxidation number as 0(zero). but in water the oxidation number of oxygen is -2 and that of hydrogen is +1. so ON of oxygen decreases hence undergoes reduction, and ON of hydrogen increases so undergoes oxidation. hence it is a redox reaction.

Learn more about redox reaction here:

https://brainly.com/question/13293425

#SPJ11

d. Inadequate ventilation.

Most cases of sick building syndrome (SBS) can be traced to inadequate ventilation. SBS is a condition in which building occupants experience a range of symptoms such as headaches, fatigue, eye and throat irritation, and respiratory problems when spending time in a particular building. The symptoms are often temporary and can improve once the affected person leaves the building.

Inadequate ventilation can cause SBS by allowing the buildup of indoor air pollutants such as carbon dioxide, volatile organic compounds (VOCs), and other contaminants. These pollutants can come from a variety of sources, including building materials, furnishings, cleaning products, and human activities such as cooking and smoking. Without adequate ventilation, these pollutants can accumulate to levels that can cause health problems.

Other factors that can contribute to SBS include poor indoor air quality, high humidity, inadequate lighting, and temperature extremes. However, inadequate ventilation is the most common cause of SBS, and improving ventilation is often the most effective way to prevent and treat the condition.

Visit to know more about Ventilation:-

brainly.com/question/29486484

#SPJ11

The reaction of silver nitrate (AgNO3) in ethanol and in a 50% ethanol:50% water mixture will differ due to the solvent properties.

In pure ethanol, silver nitrate will have limited solubility, and its reactivity may be decreased. This is because ethanol is a polar organic solvent, and silver nitrate is an ionic compound, which generally dissolves better in polar inorganic solvents like water.

In a 50% ethanol:50% water mixture, silver nitrate will dissolve more readily and exhibit increased reactivity. The presence of water, a polar inorganic solvent, enhances the solubility of silver nitrate, allowing for better interaction with other reactants.

In summary, silver nitrate will generally have a more effective reaction in a 50% ethanol:50% water mixture compared to pure ethanol, due to improved solubility and reactivity.

To know more about silver nitrate click here:

https://brainly.com/question/8071605

#SPJ11

a) The degree of ionization of 0.75 M HF is 1.9%. and b) The degree of ionization of 0.12 M HCl is 100%.

The degree of ionization of an acid is defined as the fraction of the acid molecules that dissociate into ions when dissolved in water. The degree of ionization can be calculated using the following formula:

Degree of ionization = (concentration of ionized acid / initial concentration of acid) x 100%

a) For 0.75 M HF:

HF is a weak acid, and its ionization can be represented by the following equilibrium reaction:

HF(aq) + H₂O(l) ⇌ H₃O+(aq) + F⁻(aq)

The equilibrium constant for this reaction is called the acid dissociation constant, Kₐ. For HF, Kₐ = 6.8 x 10⁻⁴ at 25°C.

Assuming that x is the concentration of H₃O⁺ and F⁻ ions produced when HF dissociates, then the equilibrium concentration of HF will be (0.75 - x), and the equilibrium concentrations of H₃O⁺ and F- ions will be x.

Using the equilibrium expression for Kₐ, we have:

Kₐ = [H₃O⁺][F⁻]/[HF]

Substituting the equilibrium concentrations into the above equation, we get:

6.8 x 10⁻⁴ = x² / (0.75 - x)

Solving for x, we get:

x = 1.4 x 10⁻² M

Therefore, the concentration of ionized HF is 1.4 x 10² M, and the

degree of ionization is:

Degree of ionization = (1.4 x 10⁻² / 0.75) x 100% = 1.9%

b) For 0.12 M HCl:

HCl is a strong acid, and it ionizes completely in water to produce H₃O₊ and Cl⁻ ions. Therefore, the concentration of ionized HCl is equal to the initial concentration of HCl, and the degree of ionization is:

Degree of ionization = (0.12 / 0.12) x 100% = 100%

The degree of ionization of 0.75 M HF is 1.9%, and the degree of ionization of 0.12 M HCl is 100%. The difference between these two values reflects the difference in the strength of the acids.

To learn more about ionization, refer to:

https://brainly.com/question/30831422

#SPJ4

To purify meso-hydrobenzoin from its side products, a combination of techniques such as recrystallization, filtration, and washing can be employed. Recrystallization selectively dissolves the desired compound in a suitable solvent at high temperatures, while side products remain in the mixture.

Upon cooling, meso-hydrobenzoin will crystallize and can be separated via filtration, leaving the side products in the filtrate. Washing the crystals helps remove any remaining impurities, resulting in purified meso-hydrobenzoin.

This method works to purify meso hydrobenzoin from its side products due to its solubility in hot ethanol. When the crude mixture is dissolved in hot ethanol, meso hydrobenzoin dissolves readily while the impurities, which have lower solubility in ethanol, are left behind. Upon cooling, meso hydrobenzoin crystallizes out of the solution in a pure form, while the impurities remain in solution or as amorphous solids. This process of hot ethanol recrystallization selectively isolates the desired product and removes impurities, leading to a higher purity of meso hydrobenzoin.

To know more about meso-hydrobenzoin click here:

https://brainly.com/question/31381612

#SPJ11

The OZONE layer protects our environment from ultraviolet (UV) rays. UV rays are a type of electromagnetic radiation that come from the sun and are harmful to living organisms in high doses.  Option 1 is correct.

The OZONE layer, located in the Earth's stratosphere, absorbs much of the UV radiation before it reaches the Earth's surface. Without the OZONE layer, increased exposure to UV radiation could lead to a range of health problems, such as skin cancer, cataracts, and weakened immune systems. Additionally, increased UV radiation can also damage crops and disrupt ecosystems. Therefore, the OZONE layer plays a critical role in maintaining the health and well-being of our planet's inhabitants. Hence the correct answer is 1.

To know more about UV radiation, here

brainly.com/question/13849635

#SPJ1

--The complete Question is, The OZONE layer protects our environment from...

In the star’s spectrum about which elements are most common in the stars.

1. Yes, the spectrum of a star can provide information about which elements are most common in it.

This is because different elements absorb light at different wavelengths, so the presence of specific absorption lines in the spectrum can indicate which elements are present. For example, if a star's spectrum shows strong absorption lines at wavelengths corresponding to hydrogen and helium, it suggests that these elements are abundant in the star.

2. No, the spectra of the two stars will not necessarily contain the same lines for all the elements in the table.

This is because the composition of each star may differ depending on factors such as age, temperature, and chemical history. However, the spectra may contain some similar lines if the stars have similar compositions.

3.The thicker absorption lines of some elements in a star's spectrum can affect the accuracy of measurements by making it more difficult to accurately measure the strength of the line.

This can lead to errors in determining the abundance of the element in the star. To improve measurements, astronomers can use higher resolution spectroscopy, which allows for finer detail in the spectrum to be observed, or they can use multiple observations and analyze the average to reduce errors.

To know more about star’s spectrum here

https://brainly.com/question/26672435

#SPJ1

The average mass of one sulfur atom is approximately 32.07 amu. The correct answer is option B.

The average mass of one sulfur (S) atom can be found by considering its atomic mass, which is commonly expressed in atomic mass units (amu). Sulfur has an atomic mass of approximately 32.07 amu, which corresponds to option B) in your list. This value represents the weighted average of the masses of all naturally occurring isotopes of sulfur, taking into account their relative abundance.

It is important to note that the atomic mass of an element is different from its molar mass, which is expressed in grams per mole (g/mol). For sulfur, the molar mass is also approximately 32.07 g/mol, as the numerical value remains the same when converting from amu to g/mol.

Therefore, option B is correct.

For more such questions on average mass, click on:

https://brainly.com/question/31562188

#SPJ11

The coefficient of H2SO4 in the balanced equation is 8, and the answer is B) 8.

To balance the given equation:

Ca3(PO4)2 + H2SO4 → CaSO4 + H3PO4

We need to ensure that the number of atoms of each element is the same on both sides of the equation.

First, we can balance the phosphorus and calcium atoms by placing a coefficient of 3 in front of Ca3(PO4)2:

3Ca3(PO4)2 + H2SO4 → CaSO4 + H3PO4

Now, there are 9 oxygen atoms on the left side and only 5 on the right side. To balance the oxygen atoms, we can add a coefficient of 8 in front of H2SO4:

3Ca3(PO4)2 + 8H2SO4 → CaSO4 + H3PO4

Finally, we can balance the hydrogen atoms by placing a coefficient of 2 in front of H3PO4:

3Ca3(PO4)2 + 8H2SO4 → CaSO4 + 2H3PO4.

For such more questions on H2SO4:

https://brainly.com/question/30356536

#SPJ11

The age range of the fossil, accounting for the 4% error during testing, would be approximately 134,400 to 145,600 years

What is Fossil Fuels?

Fossil fuels are hydrocarbon-based energy resources that are formed from the remains of ancient plants and animals that lived millions of years ago. Over time, these organic materials have been subjected to heat, pressure, and geological processes, resulting in the formation of fossil fuels, which are found underground in rock formations or deposits.

Carbon-14 dating, also known as radiocarbon dating, is a method used to determine the age of organic materials containing carbon, such as fossils, up to a certain range. The half-life of Carbon-14 is approximately 5,730 years, which means that after that amount of time, half of the Carbon-14 in a sample would have decayed.

Learn more about Fossil Fuels from the given link

https://brainly.com/question/79954

#SPJ1

When preparing for spotting, developing, and visualizing, there are several precautions that should be taken to ensure accurate observations and results. Firstly, it is important to properly clean and maintain equipment to prevent contamination and inaccuracies.

Additionally, following proper protocols and procedures for sample preparation and handling can help minimize errors and ensure consistency.

If these precautions are not followed, it can lead to flawed observations and inaccurate results. Contamination of equipment or samples can lead to false positives or negatives, while improper handling or preparation can lead to inconsistent or unreliable data. This can have significant impacts on research outcomes and can ultimately compromise the validity of the findings.

Therefore, it is crucial to prioritize proper preparation and handling techniques to minimize the potential for errors and ensure the most accurate and reliable results possible. By taking these precautions, researchers can better ensure the integrity of their work and increase the credibility of their findings.

You can learn more about protocols and procedures at: brainly.com/question/6367295

#SPJ11

Mutation testing is a powerful technique for evaluating the effectiveness of test suites in detecting faults in software systems.

It involves introducing small changes or mutations into the code, simulating the effects of real-world errors or bugs, and then running the test suites to see if they are able to identify the mutated code as faulty. By measuring the percentage of mutations that are detected by the test suites, developers can gain insights into the overall quality and effectiveness of their testing practices, and identify areas where improvements are needed.

Overall, mutation testing is an essential tool for ensuring the reliability and robustness of complex software systems. Mutation testing is a structural testing method designed to evaluate and enhance the effectiveness of test suites while estimating the number of faults in systems under test. This approach helps ensure more robust test suites and reliable systems.

To know more about systems click here

brainly.com/question/10969133

#SPJ11

Mutation testing is a structural testing method aimed at assessing and improving the adequacy of test suites, as well as estimating the number of faults present in systems under test.

1. First, the original program, also known as the "base program," is analyzed to identify areas that could potentially have faults or errors.

2. Next, a series of "mutants" are created by making small, deliberate changes to the base program. These changes represent potential faults or errors.

3. The test suite is then run against both the base program and each of the mutants. The goal is to see if the test suite can detect the differences between the base program and the mutants, indicating the presence of a fault.

4. If the test suite is successful in detecting a difference, the mutant is said to be "killed." If the test suite cannot detect a difference, the mutant is said to have "survived."

5. The mutation score is calculated by dividing the number of killed mutants by the total number of mutants. This score represents the effectiveness of the test suite in detecting faults.

6. If the mutation score is low, the test suite may be improved by adding or modifying test cases to better detect the surviving mutants. This process is repeated until the desired level of adequacy is reached.

By performing mutation testing, developers can assess and improve the quality of their test suites, ultimately leading to more robust and reliable software systems.

To know more about "base program" :

https://brainly.com/question/13597551

#SPJ11

Need the BOD results for each sample to determine which one had the lowest level of organic material, and we can graph the BOD values to visually compare the levels of organic material in each sample.

To determine which water sample had the lowest level of organic material, we need to look at the BOD (biochemical oxygen demand) results for each sample. The BOD test measures the amount of oxygen consumed by microorganisms as they decompose organic material in the water. The lower the BOD value, the less organic material is present.
Unfortunately, without the BOD results for each sample, we cannot determine which sample had the lowest level of organic material. We would need to know the BOD values for samples A, B, C, and D to make this determination.
Once we have the BOD results, we can graph them to visually compare the levels of organic material in each sample. The sample with the lowest BOD value (and therefore the lowest level of organic material) would be the point on the graph that is closest to zero.

The amount of dissolved oxygen that microorganisms consume to decompose organic materials in water is known as the "biochemical oxygen demand" (BOD). In order to gauge the amount of organic contaminants in water, it is a frequently utilised criterion.

Learn more about biochemical oxygen demand here

https://brainly.com/question/31023104

#SPJ11

Answer:

Have a Nice Best Day : )

The minor head losses are caused by a combination of factors including sudden changes in direction or velocity of flow, slime growths, corrosion, scaling, the type of material, and the "C" factor. Understanding these factors is important for designing and maintaining efficient fluid flow systems.

Minor head losses in fluid flow systems are caused by various factors. One major cause is sudden changes in direction or velocity of flow, such as in bends, elbows, and valves. These changes result in turbulence and eddies in the fluid, which cause energy losses as the fluid is forced to change its direction or speed. Another factor that contributes to minor head losses is the presence of slime growths, corrosion, or scaling inside the pipes. These deposits can cause roughness on the pipe surface, which increases the frictional resistance and decreases the flow rate.

The type of material and "C" factor also play a role in causing minor head losses. The "C" factor, also known as the friction factor, represents the resistance to flow caused by the pipe's roughness and diameter. Pipes with a larger diameter and smoother surface will have a lower "C" factor, resulting in lower head losses.

Conversely, pipes with a smaller diameter and rougher surface will have a higher "C" factor, leading to higher head losses.Corrosion and tuberculation, which is the formation of small, rough nodules on the inside of pipes, can also cause minor head losses. These deposits increase the roughness of the pipe surface, resulting in higher frictional resistance and energy losses.

For such more questions on Minor head losses:

https://brainly.com/question/17070820

#SPJ11

The formula for the ionic compound containing iron (III) ions and iodide ions is FeI3. The correct answer is option D.

This can be determined by understanding the valency of both iron and iodide ions. Iron has a valency of +3, which means that it can form ionic bonds with three negatively charged ions. Iodide ions, on the other hand, have a valency of -1, which means that they can bond with positively charged ions with a valency of +1.

To form a stable compound, three iodide ions are needed to balance the charge of one iron (III) ion, which has a charge of +3. Therefore, the formula for the ionic compound is FeI3, which means that there are three iodide ions for every one iron (III) ion.

It is important to note that the subscript after each element represents the number of atoms of that element in the compound. In this case, there is one iron (III) ion and three iodide ions, which is why the formula is FeI3. Knowing the valencies of the elements involved can help in determining the correct formula for an ionic compound.

Therefore, option D is correct.

For more such questions on ionic compound, click on:

https://brainly.com/question/2687188

#SPJ11

To convert grams of X to grams of Y for a generic reaction, the following steps can be performed: 1) Write the balanced chemical equation for the reaction.

2. Calculate the molar mass of X and Y.
3. Use stoichiometry to convert grams of X to moles of X using the molar mass of X.
4. Use the mole ratio from the balanced equation to determine the moles of Y produced.
5. Convert moles of Y to grams of Y using the molar mass of Y.

Therefore, the statements consistent with these steps would include the terms "balanced chemical equation," "molar mass," "stoichiometry," "moles," and "molar mass." Convert the moles of Y obtained in step 4 to grams by multiplying by the molar mass of Y. These steps ensure accurate conversion between grams of X and grams of Y in the context of a generic reaction.

To know more about chemical click here

brainly.com/question/25931113

#SPJ11

"Select the statements that are consistent with the steps that you would perform in converting grams of X to grams of Y for the following generic reaction."

1. Determine the molar mass of X and Y: To begin, find the molar mass of X and Y using their chemical formulas and the atomic weights of the elements involved.

2. Convert grams of X to moles of X: Divide the given mass of X (in grams) by its molar mass (in grams/mol) to convert it to moles.

3. Use the stoichiometry of the reaction: Identify the mole ratio between X and Y from the balanced chemical equation. This will help you determine how many moles of Y are produced for each mole of X consumed.

4. Convert moles of Y to grams of Y: Multiply the number of moles of Y obtained in the previous step by the molar mass of Y (in grams/mol) to convert it to grams.

These steps will help you convert grams of X to grams of Y for the given generic reaction.

To know more about stoichiometry :

https://brainly.com/question/29775083

#SPJ11

The most dangerous of the particulate air pollutants in terms of human health are Aerosols, which can contain a variety of harmful pollutants such as fine particulate matter, heavy metals, and organic compounds.

Dust can also be harmful, but typically contains less harmful pollutants compared to aerosols. These tiny particles can be easily inhaled, carrying pollutants deep into the lungs, which can be particularly dangerous for human health. Dust, pollens, and dirt can also cause issues, but aerosols pose the greatest risk among these options.

Volcanoes, dust storms, fires, vegetation, sea spray, burning of fossil fuels, and land usage all produce aerosols. Particles that are immediately released into the atmosphere are considered primary aerosols. It happens when aerosols from many sources mingle on the surface of the planet.

Learn more about Aerosols here:
brainly.com/question/12628227

#SPJ11

Answer:

5. x = 1218/79 or 15.4 (rounded)

6. x = 1429/26 or 56.9 (rounded)

Answer:

Explanation:

Answer:

Why can a liquid take the shape of the bottom of its container?

Answer :

Liquids have a fixed volume but not have a fixed shape :

» The interparticle forces of attraction in liquids are strong enough to keep the particles together, therfore, they have a fixed volume.

» But these forces are not strong enough to keep the particles together, therefore, liquids do jot have a fixed shape.

» They take up the shape of the vessel in which they are kept.

The empirical formula for C6H14O is B) C3H7O. This is because the empirical formula represents the simplest whole number ratio of atoms in a compound, and in this case, dividing all the subscripts by the greatest common factor of 2 gives C3H7O.

The empirical formula for C6H14O is B) C3H7O. An empirical formula represents the simplest whole-number ratio of elements in a compound. In this case, you can divide each element's subscript by the greatest common divisor (which is 2) to get C3H7O.

The simplified versions of molecular formulas are called empirical formulas. Similar to lowering a fraction, determining a molecule's empirical formula is a straightforward operation. The molecular formula of a molecule must be split into each of its component parts using a common value.

To know more about empirical formula click here:

https://brainly.com/question/14044066

#SPJ11

NaBH4, or sodium borohydride, is a selective reducing agent commonly used in organic chemistry for the reduction of carbonyl compounds such as aldehydes and ketones to their corresponding alcohols.

However, it is inert towards certain functional groups, including carboxylic acids, esters, amides, and nitriles. Additionally, NaBH4 does not generally react with carbon-carbon double or triple bonds (alkenes and alkynes), nor does it reduce aromatic rings, nitro groups, or halides.

This inertness of NaBH4 towards specific functional groups is due to its relatively mild reducing nature compared to more powerful reducing agents such as lithium aluminum hydride (LiAlH4). The selective reactivity of sodium borohydride allows for the reduction of particular functional groups in a molecule without affecting others, making it an essential tool for organic chemists in the synthesis of complex organic molecules.

In summary, NaBH4 is inert towards carboxylic acids, esters, amides, nitriles, alkenes, alkynes, aromatic rings, nitro groups, and halides, allowing for selective reduction of carbonyl compounds in organic synthesis.

To learn more about, Sodium

https://brainly.com/question/25597694

#SPJ11

The chemical formulas of molecular compounds show the number and type of atoms in each molecule Sometimes True.

Molecular compounds are formed when two or more atoms of different elements share electrons to form a molecule. The chemical formula of a molecular compound shows the number and types of atoms in a molecule. However, it may not always indicate the actual arrangement of atoms within the molecule.

For example, the chemical formula for glucose is C6H12O6, indicating that it has six carbon atoms, twelve hydrogen atoms, and six oxygen atoms. However, it does not indicate the actual arrangement of these atoms in the molecule, which is a complex, three-dimensional structure.

Learn more about molecular compound

https://brainly.com/question/30328923

#SPJ4

P is = 622 mmHg per one atm/760 mmHG = 0.818 atm V =? = 0.582 moles. R=0.0821 L atm/moles.KT = 15 C plus 273 = 288 a K Determine volume: V = nRT/P = 0.582 moles,.0821 L atm/moles K, (288 K),/0.818 atm, or 16.8 L

The volume occupied is one mole or a or chemical compound in standard temperature & pressure (STP) is known as the molar volume (Vm). By dividing the mass density () by the molar mass (M), it can be computed.

The volume occupied in a gas sample is proportional to its molecular weight under constant temperature and pressure. Therefore, V = kn or V is proportional to n. At identical pressure and temperature, V1n1 ≈ V2n2 (the same T, P) for two distinct gas samples.

To know more about moles visit:

https://brainly.com/question/20486415

#SPJ1

Vinyl and aryl halides do not undergo SN1 reactions due to the unique nature of their molecular structures and the stability of their intermediate carbocations. SN1 reactions involve a two-step mechanism that first forms a carbocation intermediate and then undergoes nucleophilic attack.

In vinyl halides, the halogen atom is directly attached to a carbon-carbon double bond (alkene). This structure results in a high degree of electron density around the double bond, which prevents the formation of a stable carbocation intermediate necessary for SN1 reactions. Moreover, the sp2 hybridization of the carbon atom in vinyl halides further reduces the likelihood of a carbocation being formed.

Similarly, aryl halides have a halogen atom attached to an aromatic ring. The resonance stabilization in the aromatic ring contributes to the overall stability of the molecule, and the formation of a carbocation intermediate would disrupt this stabilization. Additionally, the partial double bond character in the carbon-halogen bond of aryl halides due to resonance makes it difficult for the bond to break in the first step of the SN1 reaction.

In summary, vinyl and aryl halides do not undergo SN1 reactions because their molecular structures prevent the formation of stable carbocation intermediates, which are necessary for the reaction to proceed. The electron density and resonance stabilization in these compounds is key factors contributing to this behavior.

learn more about SN1 reactions here: brainly.com/question/18503359

#SPJ11

Explanation:

CnH2n−2

is the formula for ____________.

A) True. For an endothermic reaction, heat is treated as a reactant, and increasing the temperature of the system will shift the equilibrium towards the products to counteract the increase in heat.

As a result, the equilibrium constant will be higher at higher temperatures, as the reaction will favor the products more strongly.

The equilibrium constant (K) is a measure of the extent to which a chemical reaction proceeds to form products, and is defined as the ratio of the concentrations of products to reactants at equilibrium. For a reaction at constant temperature, the value of K is constant and depends only on the nature of the reactants and products involved.

For an endothermic reaction, the reaction absorbs heat, which is treated as a reactant. According to Le Chatelier's principle, when a system at equilibrium is subjected to a change in temperature, pressure, or concentration, the system will shift to counteract the change and establish a new equilibrium state. In the case of an endothermic reaction, increasing the temperature of the system will cause the equilibrium to shift towards the products, as the reaction will favor the formation of products to counteract the increase in heat.

As a result, the equilibrium constant for an endothermic reaction is higher at higher temperatures, as the reaction will be more strongly shifted towards the products. Conversely, for an exothermic reaction, the equilibrium constant is higher at lower temperatures, as the reaction will favor the formation of products at lower temperatures to counteract the loss of heat.

To know more about equilibrium

brainly.com/question/30694482

#SPJ11

Because calcium chloride pellets absorb moisture from the air rather than the reaction mixture, they cannot be employed to remove water from the esterification reaction.

Desiccant calcium chloride pellets are routinely used to absorb moisture from the air. They cannot, however, be utilized to remove water from an esterification reaction because their water absorption is not selective.

It means that, calcium pellets will absorb the moisture from the surroundings including the air. In contrast, azeotropic distillation employs a solvent to generate an azeotrope with water that can be removed from the reaction mixture, essentially removing water from the reaction.

To know more about esterification reaction, visit,

https://brainly.com/question/28118164

#SPJ4