The number of moles of ideal gas in a 325 mL container that has a pressure of 695 torr at 19 °C: B. 1.48 × 10^(-2) mol.
To find the number of moles of ideal gas in a 325 mL container that has a pressure of 695 torr at 19 °C, we can use the Ideal Gas Law equation, which is:
PV = nRT
Where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First, we need to convert the given values to appropriate units:
1. Pressure: 695 torr to atm (1 atm = 760 torr)
P = 695 torr * (1 atm / 760 torr) = 0.914 atm
2. Volume: 325 mL to L (1 L = 1000 mL)
V = 325 mL * (1 L / 1000 mL) = 0.325 L
3. Temperature: 19 °C to Kelvin (K = °C + 273.15)
T = 19 °C + 273.15 = 292.15 K
Now we can plug in the values into the Ideal Gas Law equation and solve for n (moles):
0.914 atm * 0.325 L = n * (0.0821 L atm/mol K) * 292.15 K
n = (0.914 atm * 0.325 L) / ((0.0821 L atm/mol K) * 292.15 K) = 1.48 × 10^(-2) mol
So, the answer is B. 1.48 × 10^(-2) mol.
To learn more about Ideal Gas Law, visit:
https://brainly.com/question/25290815
#SPJ11
Use the reaction shown below to answer these questions. 2CO(g)+2NO(g)→N2(g)+2CO2(g)2CO(g)+2NO(g)→N2(g)+2CO2(g) a. What is the volume ratio of carbon monoxide to carbon dioxide in the balanced equation? b. If 42.7 g of CO is reacted completely at STP, what volume of N2N2 gas will be produced?
a. The volume ratio of carbon monoxide to carbon dioxide in the balanced equation is 2:2, which can be simplified to 1:1. This means that for every one volume of CO gas that reacts, one volume of CO2 gas is produced.
b. To solve for the volume of N2 gas produced, we need to use the balanced equation to determine the stoichiometry of the reaction. From the equation, we can see that for every two volumes of CO gas that react, one volume of N2 gas is produced.
First, we need to convert the given mass of CO to moles using the molar mass of CO:
42.7 g CO x (1 mol CO/28.01 g CO) = 1.524 mol CO
Next, we can use the stoichiometry of the reaction to calculate the moles of N2 produced:
1.524 mol CO x (1 mol N2/2 mol CO) = 0.762 mol N2
Finally, we can use the ideal gas law to calculate the volume of N2 gas produced at STP (standard temperature and pressure, which is 0°C and 1 atm):
PV = nRT
(1 atm)(V) = (0.762 mol)(0.08206 L atm/mol K)(273 K)
V = (0.762 mol)(0.08206 L atm/mol K)(273 K)/(1 atm) = 17.6 L
Therefore, 42.7 g of CO will produce 17.6 L of N2 gas at STP.
To know more about stoichiometry, click here:-
https://brainly.com/question/29775083
#SPJ11
explain why hc--ch is more acidic than ch3ch3, even though the c-h bond in hc-ch has a higher bond dissociation energy than the ch bond in ch3ch3
HC≡CH (ethyne) is more acidic than CH3CH3 (ethane) because of the difference in hybridization and electronegativity between their carbon atoms.
In HC≡CH, the carbon atoms are sp-hybridized, which have a higher s-character (50%) than the sp3-hybridized carbon atoms in CH3CH3 (25%). The reason why HC--CH is more acidic than CH3CH3 is due to the stability of the resulting carbocation after protonation.
HC--CH has a triple bond, which means that the electrons are more tightly held and closer to the carbon atoms, making them more easily removed by an acid. This results in a more stable carbocation intermediate. On the other hand, CH3CH3 has only single bonds, which means that the electrons are further away and less easily removed, resulting in a less stable carbocation intermediate.
Despite the fact that the C-H bond in HC--CH has a higher bond dissociation energy than the C-H bond in CH3CH3, the stability of the resulting carbocation makes HC--CH more acidic.
To learn more about carbon atoms click here
brainly.com/question/30507533
#SPJ11
Classify each of the following diatomic molecules as polar or nonpolar. Drag the appropriate items to their respective bins. Reset Help CO F2 HBr O, 7 Polar Nonpolar Classify each of the following diatomic molecules as polar or nonpolar. Drag the items into the appropriate bins. Reset Help N, 12 HCI NO Polar Nonpolar
The molecules can be classifed as, Polar: HCl, NO, CO, HBr, O Nonpolar: F₂.
Polarity in a molecule refers to the separation of electric charge caused by differences in electronegativity between atoms. In a diatomic molecule, if the two atoms have the same electronegativity, they will share electrons equally and the molecule will be nonpolar.
However, if the atoms have different electronegativities, the electrons will be more attracted to the more electronegative atom, causing a partial negative charge on that atom and a partial positive charge on the other atom. This creates a dipole moment and makes the molecule polar. HCl, NO, CO, HBr, and O are all polar because of the differences in electronegativity between their constituent atoms, while F₂ is nonpolar because the two atoms have the same electronegativity.
To know more about polar molecules, here
brainly.com/question/31023968
#SPJ4
--The complete question is, Classify each of the following diatomic molecules as polar or nonpolar. Drag the appropriate items to their respective bins. Classify each of the following diatomic molecules as polar or nonpolar.
HCI
NO
CO
F2
HBr
O--
a buret contains 0.0010 m hcl up to the 9.12 ml volume mark. at the end of a titration, the hcl was at the 22.77 ml mark. how many moles of hcl were dispensed during the titration?
During the titration, 1.365 x 10-5 moles of HCl were released. By reacting a sample with a drug whose concentration is known, titration is a laboratory technique used to measure the concentration of a material in a sample.
We must utilise the equation to solve this issue:
HCl concentration times HCl volume equals moles of HCl.
The amount of HCl that was dispensed during the titration must first be determined. This equates to:
Final volume minus beginning volume equals volume discharged.
dispensed volume = 22.77 mL - 9.12 mL
dispensed volume: 13.65 mL
The volume is then converted to litres:
volume dispensed is equal to 13.65 mL times (1 L/1000 mL)
volume delivered equals 0.01365 L
The moles of HCl discharged can now be calculated using the equation above:
HCl concentration times HCl volume equals moles of HCl.
1.365 x 10-5 moles of HCl are equal to 0.0010 M x 0.01365 L of HCl.
Learn more about titration here:
https://brainly.com/question/29491609
#SPJ11
at 375 k the decomposition of copper oxide
At 375 K, copper oxide undergoes decomposition. This means that it breaks down into its constituent elements, copper and oxygen.
The decomposition reaction of copper oxide can be represented as: 2CuO → 2Cu + O2, This reaction requires energy to occur, and at 375 K the thermal energy is sufficient to overcome the activation energy needed for the reaction to take place. As a result, the copper oxide decomposes into copper and oxygen gas.
At 375 K, the decomposition of copper oxide occurs. Copper oxide is a compound made of copper and oxygen. During decomposition, the copper oxide breaks down into its constituent elements, releasing copper and oxygen gas.
To know more about reaction click here
brainly.com/question/30564957
#SPJ11
Fill in the left side of this equilibrium constant equation for the reaction of 4 - bromoaniline (C6H4BrNH2), a weak base, with water.
The equation for the reaction of 4-bromoaniline with water can be written as follows: C₆H₄BrNH₂ + H₂O ⇌ C₆H₄BrNH₃ + OH⁻
To fill in the left side of the equation, we need to think about what products might form when 4-bromoaniline reacts with water. Since 4-bromoaniline is a weak base, it can accept a proton (H⁺) from water to form its conjugate acid, which would be the product on the left side of the equation. So, we can write the equation like this:
C₆H₄BrNH₂ + H₂O ⇌ C₆H₄BrNH₃ + OH⁻
In words, this equation represents the reaction of 4-bromoaniline with water to form its conjugate acid (C₆H₄BrNH₃⁺) and hydroxide ions (OH⁻). The equilibrium constant (K) for this reaction can be calculated by dividing the concentration of the products (C₆H₄BrNH₃⁺ and OH⁻) by the concentration of the reactants (4-bromoaniline and water) at equilibrium.
Learn more about conjugate acid at https://brainly.com/question/12584785
#SPj11
what characteristics should a good sample for melting point determination have? select one or more:a) thoroughly dry b) solid phase c) small particlesd) large clumps e) liquid phase
The right response is solid phase (option b). A solid phase sample that is completely dry and free of moisture is ideal for melting point analysis.
What qualities should a good sample have in order to determine its melting point?A melting point analysis capillary tube, which is just a glass capillary tube with one open end, should then be filled with the dry sample. A sample size of just 1 to 3 mm is sufficient for analysis.
What aspects of a material can change its melting point?Pressure: Increasing pressure lowers the melting point of compounds that shrink upon melting whereas increasing pressure raises it for compounds that expand upon melting.
To know more about melting point visit:-
https://brainly.com/question/29578567
#SPJ1
define the "common ion effect." if outside sources are consulted (such as a textbook, etc.), be sure to cite where the information was obtained.
The common ion effect is a phenomenon in which the presence of an ion in a solution decreases the solubility of a compound that contains that ion.
What is Common Ion Effect?The common ion effect occurs when a weak electrolyte is combined with a strong electrolyte containing a common ion, resulting in a decrease in the solubility of the weak electrolyte due to the presence of the common ion. This phenomenon is an application of Le Chatelier's principle, which states that a system at equilibrium will shift to counteract any changes applied to it.
For example, if a solution of sodium chloride is mixed with hydrochloric acid, the concentration of chloride ions will increase due to the dissociation of HCl. As a result, the solubility of NaCl in the solution will decrease due to the common ion effect.
To know more about Common Ion Effect:
https://brainly.com/question/30772969
#SPJ11
Does a reaction occur when aqueous solutions of sodium hydroxide and manganese(II) sulfate are combined? yes no If a reaction does occur, write the net ionic equation. Use the solubility rules provided in the OWL Preparation Page to determine the solubility of compounds. Use the pull-down boxes to specify states such as (aq) or (s). If a box is not needed leave it blank.
Yes, a reaction occurs when aqueous solutions of sodium hydroxide and manganese(II) sulfate are combined.
Mn²⁺(aq) + 2OH⁻(aq) → Mn(OH)₂(s)
This is the net ionic equation for the reaction between aqueous solutions of sodium hydroxide and manganese(II) sulfate.
This reaction is a double displacement reaction, which results in the formation of manganese(II) hydroxide and sodium sulfate.
Here's the balanced chemical equation:
MnSO₄(aq) + 2NaOH(aq) → Mn(OH)₂(s) + Na₂SO₄(aq)
Now, let's write the net ionic equation:
Mn²⁺(aq) + SO₄²⁻(aq) + 2Na⁺(aq) + 2OH⁻(aq) → Mn(OH)₂(s) + 2Na⁺(aq) + SO₄²⁻(aq)
As sodium ions and sulfate ions do not participate in the reaction, we can exclude them as spectator ions:
Mn²⁺(aq) + 2OH⁻(aq) → Mn(OH)₂(s)
Learn more about sodium ions Refer: https://brainly.com/question/29704319
#SPJ11
what special precautions should be used when performing the lucas test
When performing the Lucas test, special precautions should be taken to ensure safety and accurate results. To differentiate between primary, secondary, and tertiary alcohols, chemists utilize the Lucas test.
These precautions include:
1. Wear appropriate safety gear: Always wear safety goggles, gloves, and a lab coat to protect yourself from any spills or splashes.
2. Use a well-ventilated area: Carry out the Lucas test in a fume hood or well-ventilated space, as the reagent (Lucas reagent) contains concentrated hydrochloric acid and can produce harmful fumes.
3. Handle reagents carefully: The Lucas reagent is corrosive and can cause severe burns on contact. Handle it with care and avoid direct contact with your skin or eyes.
4. Avoid heating: Do not heat the reaction mixture, as this can cause violent reactions or the release of toxic fumes.
5. Dispose of waste properly: After completing the test, dispose of any waste according to your institution's guidelines for hazardous waste disposal.
By following these precautions, you can perform the Lucas test safely and effectively.
Learn more about Lucas test here
https://brainly.com/question/31420169
SPJ11
The synthesis of sulfanilamide as described in the textbook begins with acetanilide (1), which is an amide: Yet; the final product has an amino group attached to the benzene ring. So the question becomes, (a) why not start the synthesis with aniline (3), which is already an amine?(b) Let's consider the reaction of (1) with chlorosulfonic acid in the first step of the synthesis outlined in question 1. The product is (2). But if we started the synthesis with (3), what would be the product of the reaction with chlorosulfonic acid? Write the equation showing how (3) would react with chlorosulfonic acid and what the product would be.
The reason why the synthesis of sulfanilamide starts with acetanilide instead of aniline is because acetanilide is more easily obtained and purified compared to aniline.
Acetanilide also has a lower tendency to undergo undesirable side reactions during the synthesis.
When aniline is reacted with chlorosulfonic acid, the amino group on the benzene ring reacts with the acid to form an ammonium ion. This ammonium ion then undergoes a nucleophilic substitution reaction with the chloride ion, resulting in the formation of p-chloroaniline. The reaction can be represented as:
C6H5NH2 + HClSO3 → C6H5NH3+ ClSO3^-
C6H5NH3+ ClSO3^- + H2O → C6H4ClNH2 + H2SO4
So if we started the synthesis with aniline instead of acetanilide, the product of the reaction with chlorosulfonic acid would be p-chloroaniline instead of p-chloroacetanilide.
Visit here to learn more about aniline brainly.com/question/31081529
#SPJ11
. recall the experiment you did in the first general chemistry lab. how did we measure the heat of a reaction?
In the first general chemistry lab, we measured the heat of a reaction using a device called a calorimeter. The calorimeter is designed to isolate the reaction from the surrounding environment, so that the heat generated or absorbed by the reaction can be accurately measured.
To measure the heat of a reaction, we first placed a known amount of water in the calorimeter and recorded its initial temperature. Next, we added the reactants to the calorimeter and stirred the mixture until the reaction was complete. Finally, we recorded the final temperature of the water in the calorimeter. By measuring the change in temperature of the water, we were able to calculate the heat of the reaction using the formula Q = mcΔT, where Q is the heat absorbed or released by the reaction, m is the mass of the water in the calorimeter, c is the specific heat capacity of water, and ΔT is the change in temperature of the water.
To learn more about calorimeter visit;
https://brainly.com/question/4802333
#SPJ11
what likely happened if you didn't recover any crystals after the recrystallization and where did the missing compound go? what could you do if this occurs?
If you didn't recover any crystals after recrystallization, it's likely that the compound either remained dissolved in the solvent or was lost during the process. To address this issue, you could try using a different solvent, adjusting the cooling rate, or using a smaller volume of solvent.
In recrystallization, a compound is dissolved in a solvent at a high temperature, and then the solution is allowed to cool. As the solution cools, the solubility of the compound decreases, causing it to form crystals. If no crystals are recovered, it's possible that the compound remained dissolved due to an inappropriate solvent choice or an excess of solvent, preventing proper crystal formation. Another possibility is that the compound was lost during the process, such as during filtration or transfer steps.
If this issue occurs, you could try using a different solvent with better solubility properties for the compound or using a smaller volume of solvent to increase the concentration of the compound and promote crystal formation. Additionally, adjusting the cooling rate (slow cooling might help in forming crystals) or using a better filtration method can help prevent the loss of the compound during the process.
Learn more about recrystallization here:
https://brainly.com/question/29215760
#SPJ11
The Ksp of iron(II) carbonate, FeCO3, is 3.13 � 10-11. Calculate the solubility of this compound in g/L.
Please show work
The Ksp of iron(II) carbonate,[tex]FeCO_{3}[/tex], is 3.13,then the solubility of [tex]FeCO_{3}[/tex]in g/L is 6.47 x [tex]10^{-4}[/tex] g/L.
To calculate the solubility of ,[tex]FeCO_{3}[/tex]in g/L, we need to use the Ksp expression, which is:
Ksp = [Fe2+][[tex]CO_{3}[/tex]2-]
Where [Fe2+] is the molar concentration of Fe2+ ions and [[tex]CO_{3} 2-[/tex] -] is the molar concentration of [tex]CO_{3} 2-[/tex] - ions in the solution.
Since ,[tex]FeCO_{3}[/tex]is a sparingly soluble compound, we can assume that the concentration of Fe2+ and [tex]CO_{3} 2-[/tex] ions in the solution is equal to the amount of ,[tex]FeCO_{3}[/tex]that dissolves. Therefore, we can write:
Ksp = [Fe2+][[tex]CO_{3} 2-[/tex] -] = s x s
Where s is the solubility of ,[tex]FeCO_{3}[/tex]in mol/L.
Now, we can solve for s:
s = sqrt(Ksp) = sqrt(3.13 x[tex]10^{-11}[/tex]) = 5.59 x [tex]10^{-6}[/tex] g/L mol/L
Finally, we can convert the solubility from mol/L to g/L using the molar mass of ,[tex]FeCO_{3}[/tex]:
Molar mass of ,[tex]FeCO_{3}[/tex]= 56.85 g/mol + 12.01 g/mol + 3 x 16.00 g/mol = 115.85 g/mol
Therefore, the solubility of ,[tex]FeCO_{3}[/tex]in g/L is:
s(g/L) = s(mol/L) x Molar mass = 5.59 x [tex]10^{-6}[/tex]mol/L x 115.85 g/mol = 6.47 x [tex]10^{-4}[/tex] g/L
So, The Ksp of iron(II) carbonate, ,[tex]FeCO_{3}[/tex], is 3.13,then the solubility of ,[tex]FeCO_{3}[/tex]in g/L is 6.47 x [tex]10^{-4}[/tex] g/L
learn more about carbonate here
https://brainly.com/question/22530423
#SPJ11
For the reaction H2(g) + I2(g) -> 2HI(g) , K = 57.0 at 700K what can be said about this reaction at this temperature? what can be said about this reaction at this temperature? For the reactionwhat can be said about this reaction at this temperature? The equilibrium lies far to the right. The reaction will proceed very slowly. The reaction contains significant amounts of products and reactants at equilibrium. The equilibrium lies far to the left.
For the reaction [tex]H_{2}[/tex] (g) + [tex]I_{2}[/tex] (g) -> 2HI(g) at 700K with K = 57.0, it can be said that the equilibrium lies far to the right.
What happens at equilibrium for a reaction?Based on the given equilibrium constant (K = 57.0) for the reaction [tex]H_{2}[/tex] (g) + [tex]I_{2}[/tex] (g) -> 2HI(g) at 700K, it can be inferred that the equilibrium lies far to the right, meaning the formation of HI (hydrogen iodide) is favored at this temperature. This is because a large value of K indicates that the reaction favors the formation of products. Therefore, at this temperature, the reaction contains significant amounts of products and a smaller amount of reactants at equilibrium.
Also, at 700K, the forward reaction (formation of 2HI from [tex]H_{2}[/tex] and [tex]I_{2}[/tex] ) is highly favored over the reverse reaction (formation of [tex]H_{2}[/tex] and [tex]I_{2}[/tex] from 2HI). As a result, significant amounts of products (2HI) are formed, while the concentrations of reactants are relatively low at equilibrium.
To know more about Equilibrium:
https://brainly.com/question/6659238
#SPJ11
For the reaction [tex]H_{2}[/tex] (g) + [tex]I_{2}[/tex] (g) -> 2HI(g) at 700K with K = 57.0, it can be said that the equilibrium lies far to the right.
What happens at equilibrium for a reaction?Based on the given equilibrium constant (K = 57.0) for the reaction [tex]H_{2}[/tex] (g) + [tex]I_{2}[/tex] (g) -> 2HI(g) at 700K, it can be inferred that the equilibrium lies far to the right, meaning the formation of HI (hydrogen iodide) is favored at this temperature. This is because a large value of K indicates that the reaction favors the formation of products. Therefore, at this temperature, the reaction contains significant amounts of products and a smaller amount of reactants at equilibrium.
Also, at 700K, the forward reaction (formation of 2HI from [tex]H_{2}[/tex] and [tex]I_{2}[/tex] ) is highly favored over the reverse reaction (formation of [tex]H_{2}[/tex] and [tex]I_{2}[/tex] from 2HI). As a result, significant amounts of products (2HI) are formed, while the concentrations of reactants are relatively low at equilibrium.
To know more about Equilibrium:
https://brainly.com/question/6659238
#SPJ11
carvone is the major constituent of spearmint oil. draw the major organic product of the reaction of carvone with lialh4, then h3o .
The major organic product of this reaction is (1R,2S,5R)-2-methyl-5-(propan-2-yl)cyclohexan-1-ol, also known as spearmint alcohol.
When carvone is treated with LiAlH4 followed by H3O+, it undergoes reduction followed by hydrolysis to form a secondary alcohol.
The reaction mechanism is as follows:
Step 1: Reduction of carbonyl group to alcohol using LiAlH4
Step 2: Protonation of the intermediate using H3O+
The final product has the same molecular formula as carvone but differs in its functional group, with a secondary alcohol replacing the carbonyl group.
LiAlH4 (lithium aluminum hydride) is a powerful reducing agent that can reduce a variety of functional groups, including carbonyl groups (such as those found in aldehydes, ketones, and carboxylic acids) to form alcohols. In this case, the carbonyl group of carvone is reduced to an alcohol.
The reduction of the carbonyl group by LiAlH4 is an example of a nucleophilic addition reaction. The hydride ion (H-) from LiAlH4 acts as a nucleophile, attacking the carbonyl carbon and forming a new bond with it. This leads to the formation of an intermediate alkoxide ion, which is then protonated by H3O+ to form the final alcohol product.
learn more about Hydrolysis here:
https://brainly.com/question/12237250
#SPJ11
Would the atomic weight of neon (Ne) necessarily be the same on Mars as on Earth?
a. Yes .The atomic weight of neon (Ne) would necessarily be the same on Mars as on Earth. Atomic weight is a fundamental property of an element, based on the weighted average of the isotopes' atomic masses.
The atomic weight of an element is the average weight of its atoms, taking into account the relative abundance of each isotope. Neon (Ne) has a standard atomic weight of 20.18, which means that its average atomic mass is 20.18 atomic mass units (amu). This value is based on the abundance of its two stable isotopes, Ne-20 and Ne-22, which occur in natural neon in a ratio of approximately 90:10.
Whether the atomic weight of neon on Mars would be the same as on Earth depends on whether the isotopic composition of neon on Mars is the same as on Earth. If Mars has a similar distribution of isotopes as Earth, then the atomic weight of neon would be the same. However, if Mars has a different isotopic composition, then the atomic weight of neon on Mars would be different.
learn more about Neon Refer: https://brainly.com/question/24481291
#SPJ11
complete question:
Would the atomic weight of neon (Ne) necessarily be the same on Mars as on Earth?
a. yes
b. no
the ph of pure water at 10°c is 7.27. what is the value of kw at 10°c?
The value of Kw at 10°C is Kw = [H+][OH-] = 10^-7.27 x Kw / 10^-7.27, which simplifies to Kw = 1.0 x 10^-14. The value of Kw, also known as the ion product constant of water, is the equilibrium constant for the reaction in which water molecules ionize into hydronium ions (H3O+) and hydroxide ions (OH-) in aqueous solution.
The value of Kw at 10°C can be calculated using the formula Kw = [H+][OH-]. Since pure water has a pH of 7.27 at 10°C, we can determine the concentration of H+ ions using the formula pH = -log[H+]. Therefore, [H+] = 10^-7.27.
To find the concentration of OH- ions, we can use the equation Kw = [H+][OH-]. Substituting the value of [H+], we get Kw = 10^-7.27 x [OH-]. Solving for [OH-], we get [OH-] = Kw / 10^-7.27. Kw plays an important role in the chemistry of aqueous solutions, as it helps determine the acidity or basicity of a solution through the calculation of pH. For example, if the concentration of hydronium ions in a solution is greater than the concentration of hydroxide ions, the solution is acidic and the pH will be less than 7. On the other hand, if the concentration of hydroxide ions is greater than the concentration of hydronium ions, the solution is basic and the pH will be greater than 7.
Learn more about The value of Kw here:
https://brainly.com/question/31328202
#SPJ11
Determine the resulting pH when 0.003 mol of solid NaOH is added to a 100.0 mL buffer containing 0.13 M HClO and 0.37 M NaClO. The value of Ka for HClO is 2.9 × 10⁻⁸. Determine the moles of the ractant and product after the reaction of the acid and base.
The resulting pH after adding 0.003 mol of solid NaOH to a 100.0 mL buffer containing 0.13 M HClO and 0.37 M NaClO is 8.08.
1. Calculate moles of HClO and NaClO in the buffer:
Moles HClO = 0.13 M × 0.100 L = 0.013 mol
Moles NaClO = 0.37 M × 0.100 L = 0.037 mol
2. Find moles of HClO and NaClO after NaOH reacts with HClO:
Moles HClO remaining = 0.013 mol - 0.003 mol = 0.010 mol
Moles NaClO produced = 0.037 mol + 0.003 mol = 0.040 mol
3. Calculate the concentrations of HClO and NaClO after the reaction:
[HClO] = 0.010 mol / 0.100 L = 0.10 M
[NaClO] = 0.040 mol / 0.100 L = 0.40 M
4. Use the Henderson-Hasselbalch equation to find the pH:
pH = pKa + log ([NaClO] / [HClO])
pKa = -log(2.9 × 10⁻⁸) = 7.54
pH = 7.54 + log (0.40 / 0.10) = 8.08
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/13423434#
#SPJ11
200. ml of 2.50 m h2so4 is added to 300. ml of 4.00 m h2so4. assuming that the volumes are additive, the final concentration is __.
Using the formula: (2.50 M × 200 mL + 4.00 M × 300 mL) / (200 mL + 300 mL) = (500 + 1200) / 500 = 1700 / 500 = 3.40 M So, the final concentration of H2SO4 after the solutions are added is 3.40 M.
To find the final concentration, we need to first calculate the total moles of H2SO4 present after the two solutions are added.
Moles of H2SO4 in 200 ml of 2.50 M H2SO4 = (200/1000) x 2.50 = 0.5 moles
Moles of H2SO4 in 300 ml of 4.00 M H2SO4 = (300/1000) x 4.00 = 1.2 moles
Total moles of H2SO4 = 0.5 + 1.2 = 1.7 moles
Now, we need to calculate the final volume of the solution:
Final volume = 200 ml + 300 ml = 500 ml
Finally, we can calculate the final concentration:
Final concentration = Total moles of H2SO4 / Final volume
Final concentration = 1.7 moles / (500/1000) L
Final concentration = 3.4 M
Therefore, the final concentration is 3.4 M (sulfuric acid).
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ11
estimate the freezing point of 200 cm3 of water sweetened by the addition of 2.5 g of sucrose. treat the solution as ideal.
The solution's freezing point is approximately 0.0678 °C lower than that of pure water.
The freezing point is what?The temperature at which a liquid, under atmospheric pressure, transitions from a liquid to a solid is known as the freezing point. Both the solid and liquid states coexist at the freezing point because these two phases, liquid and solid, are in equilibrium there.
We can use the formula:
ΔT_f = K_f * m
ΔT_f = freezing point depression
K_f = freezing point depression constant for the solvent
m = molality of the solution
The molar mass of sucrose = 342.3 g/mol,
Therefore, 2.5 g of sucrose is:
n = m/M = 2.5 g / 342.3 g/mol = 0.007305 mol
The mass of 200 cm^3 of water is:
m_water = density_water * V_water = (1 g/cm^3) * (200 cm^3) = 200 g
So the molality,
m = n_sucrose / m_water = 0.007305 mol / 0.2 kg = 0.0365 mol/kg
The freezing point depression constant for water = 1.86 K/m,
ΔT_f = K_f * m = 1.86 K/m * 0.0365 mol/kg = 0.0678 K
So,
T_f = 0°C - ΔT_f = 0°C - 0.0678 K = -0.0678°C
To know more about the freezing point visit:
https://brainly.com/question/31440246
#SPJ1
What is the difference between odichlorobenzene and p dichlorobenzene
Dichlorobenzene and p-dichlorobenzene are two different compounds that belong to the family of chlorobenzenes. The main difference between the two is the position of the two chlorine atoms on the benzene ring.
In dichlorobenzene, the two chlorine atoms are located on adjacent carbon atoms, while in p-dichlorobenzene, they are located on opposite sides of the ring, on the 1,4 positions. This structural difference between dichlorobenzene and p-dichlorobenzene affects their physical and chemical properties. For example, p-dichlorobenzene has a higher boiling point and is more stable than dichlorobenzene. Additionally, p-dichlorobenzene is commonly used as a moth repellent and air freshener, while dichlorobenzene is mainly used in the production of other chemicals.
Both compounds are toxic and can cause harm to human health and the environment. However, p-dichlorobenzene is considered to be less harmful than dichlorobenzene due to its lower volatility and slower release into the atmosphere.
In summary, the main difference between dichlorobenzene and p-dichlorobenzene is the position of the two chlorine atoms on the benzene ring. This difference affects their properties and uses, and highlights the importance of understanding the molecular structure of chemicals and their potential impact on human health and the environment.
Learn more about compounds here:
brainly.com/question/29588489
#SPJ11
17.44 predict the product of the following reaction and propose a mechanism for its formation: na, ch3oh
In this reaction, sodium reacts with methanol to form sodium methoxide (NaOCH3) and hydrogen gas (H2).
Based on the given terms, it seems that you are looking for the product and mechanism of a reaction involving sodium (Na) and methanol (CH3OH).
In this reaction, sodium reacts with methanol to form sodium methoxide (NaOCH3) and hydrogen gas (H2). The reaction is as follows:
2Na + 2CH3OH → 2NaOCH3 + H2
The mechanism for this formation involves sodium donating an electron to methanol, causing the O-H bond in methanol to break. As a result, sodium bonds with the oxygen atom (forming NaOCH3) and hydrogen gas is released.
Know more about Methanol here:
https://brainly.com/question/3006705
#SPJ11
use the chemical agcl to describe solubility molar solubility and solubility product
Using the chemical AGCL, solubility, molar solubility, and solubility product are important concepts that help to understand the dissolution and equilibrium of sparingly soluble compounds
Using the chemical AgCl (silver chloride) as an example, solubility refers to the maximum amount of the compound that can dissolve in a given amount of solvent at a specific temperature. Silver chloride has low solubility in water, meaning only a small amount of it dissolves in water to form a saturated solution. Molar solubility, on the other hand, is the number of moles of AgCl that can dissolve per liter of solvent to form a saturated solution. It is expressed in mol/L. For silver chloride, the molar solubility in water is approximately 1.3 x 10^-5 mol/L at 25°C.
Solubility product (Ksp) is an equilibrium constant that describes the degree of dissolution of a sparingly soluble compound like AgCl in a solvent, it is calculated by multiplying the molar concentrations of the dissociated ions, each raised to the power of their stoichiometric coefficients. For AgCl, the dissociation is AgCl(s) ⇌ Ag+(aq) + Cl-(aq). The Ksp expression for this reaction is Ksp = [Ag+][Cl-]. The Ksp value for silver chloride in water is 1.8 x 10^-10 at 25°C. In summary, solubility, molar solubility, and solubility product are important concepts that help to understand the dissolution and equilibrium of sparingly soluble compounds like AgCl in a solvent.
Learn more about solubility at:
https://brainly.com/question/9098308
#SPJ11
In which of these substances are the atoms held together by metallic bonding?
A. Cr
B. Si
C. S8
D. CO2
E. Br2
In the given list of substances, the atoms held together by metallic bonding are found in option A, Chromium (Cr).
The substance in which the atoms are held together by metallic bonding is A, Cr (Chromium). Metallic bonding is a type of bonding that occurs between metal atoms, where the outermost electrons of the atoms are free to move around and are not associated with any one particular atom, resulting in a "sea" of delocalized electrons. This allows for strong bonds between the metal atoms, which is why metals tend to be strong and malleable. Metallic bonding occurs between metal atoms, and Chromium is the only metal on the list. Therefore the right option is A.
Learn more about Metallic bonding: https://brainly.com/question/21081009
#SPJ11
Convert 2. 1 mole of Al2(SO4)3 ionic units to a number of particles.
We can estimate that 2.1 moles of Al2(SO4)3 comprise roughly 1.263 x 1024 particles of the material.
The quantity of a substance is frequently expressed in terms of moles. There are a lot of particles in one mole of any substance—roughly 6.02 x 1023 particles per mole.
If we multiply 2.1 moles of Al2(SO4)3 by Avogadro's number, we may translate it to the number of particles. The number of Al2(SO4)3 ions found in 2.1 moles of the compound, or 1.263 x 1024 particles, are obtained.
In conclusion, we can estimate that 2.1 moles of Al2(SO4)3 comprise roughly 1.263 x 1024 particles of the material.
Learn more about Al2(SO4)3:
https://brainly.com/question/20543705
#SPJ4
If the ratio of the rate of diffusion of two gases is 1:3, then what is the ratio of the molecular weight?
The ratio of the molecular weights of the two gases is 1:9, which can be determined using Graham's law of effusion/diffusion, where the rate of diffusion is inversely proportional to the square root of molecular weight.
According to Graham's law of diffusion, the rate of diffusion of a gas is inversely proportional to the square root of its molecular weight. Therefore, if the ratio of the rate of diffusion of two gases is 1:3, then the ratio of the square roots of their molecular weights will also be 1:3. This means that the ratio of their molecular weights will be the square of this ratio, which is 1:9. So, the molecular weight of the heavier gas will be nine times that of the lighter gas. This relationship is important in various applications, such as in the separation of gases in industry and in understanding the diffusion of gases in the atmosphere.
Learn more about molecular weight here:
https://brainly.com/question/27988184
#SPJ11
What is the minimum amount of 6.0 M H2SO4 necessary to produce 25.0 g of H2 (g) according to the reaction between aluminum and sulfuric acid?
2 Al(s) + 3 H2SO4(aq)-> Al2(SO4)3(aq) + 3 H2(g)
The minimum amount of 6.0 M H2SO4 necessary to produce 25.0 g of H2 is approximately 2.06 liters.
To find the minimum amount of 6.0 M H2SO4 necessary to produce 25.0 g of H2, we can use stoichiometry.
First, convert the mass of H2 to moles:
25.0 g H2 * (1 mol H2 / 2.02 g H2) ≈ 12.38 mol H2
Now, use the balanced chemical equation to find the moles of H2SO4 required:
12.38 mol H2 * (3 mol H2SO4 / 3 mol H2) = 12.38 mol H2SO4
Finally, use the molarity of H2SO4 to find the volume needed:
12.38 mol H2SO4 * (1 L / 6.0 mol H2SO4) ≈ 2.06 L
So, the minimum amount of 6.0 M H2SO4 necessary to produce 25.0 g of H2 is approximately 2.06 liters.
Know more about Molarity here:
https://brainly.com/question/8732513
#SPJ11
Individual nitrogen atoms are
paramagnetic
diamagetic
pseudomagnetic
Individual nitrogen atoms are paramagnetic.
Paramagnetism refers to the property of certain materials or atoms that are attracted to an external magnetic field. In the case of nitrogen atoms, they possess an unpaired electron in their 2p orbital, which makes them paramagnetic. Nitrogen has an electron configuration of 1s2 2s2 2p3, with three unpaired electrons in its 2p sublevel.
Unpaired electrons have a net spin, creating a magnetic moment. When an external magnetic field is applied, the unpaired electrons align with the field, resulting in a weak attraction. This property is characteristic of paramagnetic substances.
Diamagnetism, on the other hand, refers to the property of substances that are weakly repelled by magnetic fields due to the presence of paired electrons. Pseudomagnetism is not a recognized term in the context of magnetic properties.
In conclusion, individual nitrogen atoms are paramagnetic due to the presence of unpaired electrons in their electron configuration.
To learn more about nitrogen atoms click here
brainly.com/question/2396742
#SPJ11
At 50°C the value of Kw is 5.5 x 10-14. An acidic solution at 50°C has. A) [H3O+] < 2.3 x 10-7M< [OH] • B) [H30+1 = [OH] < 2.3 x 10-7M. C) [H3O+] < [OH] < 2.3 x 10-7M. D) [OH] < 2.3 x 10-7M< < [H3O+]
Option D - [OH⁻] < 2.3 x 10⁻⁷M < [H3O⁺]. At 50°C the value of Kw is 5.5 x 10-14. An acidic solution at 50°C has [OH⁻] < 2.3 x 10⁻⁷M < [H3O⁺].
At 50°C, Kw (the ion product constant for water) is 5.5 x 10⁻¹⁴. This means that [H3O⁺][OH⁻] = 5.5 x 10⁻¹⁴.
In an acidic solution, [H3O⁺] is greater than [OH⁻]. So, we know that [H3O⁺] > [OH⁻] in this scenario.
Using the Kw expression, we can rearrange to solve for [OH⁻].
[H3O⁺][OH⁻] = 5.5 x 10⁻¹⁴
[OH⁻] = 5.5 x 10⁻¹⁴ / [H3O⁺]
Since [H3O⁺] is greater than [OH⁻], we can substitute in the smallest possible value for [H3O⁺], which is 2.3 x 10⁻⁷M (given in the answer choices).
[OH-] = 5.5 x 10⁻¹⁴ / 2.3 x 10⁻⁷M
[OH-] = 2.39 x 10⁻⁸M
Therefore, the answer is D) [OH⁻] < 2.3 x 10⁻⁷M < [H3O⁺].
Know more about ion product constant for water - brainly.com/question/9876097
#SPJ11