How does our viewing angle from earth affect what type of agn we observe?

If a team of students conducts a series of experiments to investigate collisions. C. Yes, because the kinetic energy of the two-cart system in the second experiment after the collision is less than that of the first experiment.

In the first experiment, the two carts collide on a smooth surface and stick together, so the kinetic energy of the system after the collision is entirely in the form of translational kinetic energy of the combined carts.

In the second experiment, the two carts collide on a rough surface and stick together, so some of the kinetic energy is converted into thermal energy due to friction between the carts and the surface. This means that the kinetic energy of the system after the collision is less than in the first experiment.

Option A is incorrect because the kinetic energy is not necessarily the same in both experiments.

Option B is incorrect because the thermal energy is not necessarily the same in both experiments.

Option D is incorrect because the thermal energy is not considered in the calculation of the total energy of the system after the collision.

Learn more about total energy  here:https://brainly.com/question/29581211

#SPJ1

To solve this problem, we need to use the principle of conservation of energy, which states that the total energy in a system is constant. In this case, the energy lost by the copper pipe as it cools down will be gained by the water as it heats up. We can use the equation:

Q_copper = -Q_water

where Q_copper is the heat lost by the copper pipe, and Q_water is the heat gained by the water. The negative sign indicates that the energy flows from the copper to the water.

The heat lost by the copper pipe can be calculated using the formula:

Q_copper = mcΔT

where m is the mass of the copper pipe, c is the specific heat of copper, and ΔT is the change in temperature. We can assume that the final temperature of the copper-water mixture is the same, so we can write:

Q_copper = mc(800.0 - T)

where T is the final temperature of the mixture.

The heat gained by the water can be calculated using the formula:

Q_water = mwCΔT

where mw is the mass of the water, C is the specific heat of water, and ΔT is the change in temperature. We can assume that the initial temperature of the water is 20.0°C, so we can write:

Q_water = mwC(T - 20.0)

Now we can substitute these equations into the conservation of energy equation:

mc(800.0 - T) = -mwC(T - 20.0)

Solving for T:

mc(800.0 - T) = mwC(T - 20.0)

1500.0 * 0.386 * (800.0 - T) = 5.00 * 4.184 * (T - 20.0)

231480 - 579.6T = 20.92T - 418.4

600.52T = 231898.4

T = 386.6°C

Therefore, the final temperature of the copper-water mixture is 386.6°C.

[tex]\huge{\colorbox{black}{\textcolor{lime}{\textsf{\textbf{I\:hope\:this\:helps\:!}}}}}[/tex]

[tex]\begin{align}\colorbox{black}{\textcolor{white}{\underline{\underline{\sf{Please\: mark\: as\: brillinest !}}}}}\end{align}[/tex]

[tex]\textcolor{blue}{\small\texttt{If you have any further questions,}}[/tex] [tex]\textcolor{blue}{\small{\texttt{feel free to ask!}}}[/tex]

♥️ [tex]{\underline{\underline{\texttt{\large{\color{hotpink}{Sumit\:\:Roy\:\:(:\:\:}}}}}}\\[/tex]

The angle of reflection is the angle between the reflected ray and the normal to the surface

The angle of reflection is the angle made by the reflected ray with the surface, measured relative to the normal, and is equal to the angle of incidence, which is the angle between the incident ray and the normal.

The angle of reflection can be determined using the law of reflection, which states that the angle of incidence is equal to the angle of reflection. This law applies to the reflection of light, sound, and other waves from a smooth, flat surface, such as a mirror or a still body of water.

Learn more about reflected ray:https://brainly.com/question/3764651

#SPJ1

Answer:

2.54 seconds

Explanation:

The period of a swing on a playground swing set can be calculated using the formula:

T = 2π√(L/g)

where T is the period, L is the length of the swing's chain, and g is the acceleration due to gravity, which is approximately 9.81 m/s².

Substituting the given values, we get:

T = 2π√(4.0 m/9.81 m/s²)

T = 2π√0.407

T = 2.54 s (rounded to two significant figures)

Therefore, the period of the swing is 2.54 seconds.

Hope this helps!

Answer:

2 Pascal (Pa)

Explanation:

Pressure is defined as the force acting per unit area. Mathematically, it is expressed as:

Pressure (P) = Force (F) / Area (A)

Given:

Force exerted by the air inside the balloon (F) = 1 N

Area of the balloon (A) = 0.5 m^2

Plugging in the given values into the formula for pressure, we get:

P = F / A

P = 1 N / 0.5 m^2

Using basic arithmetic, we can calculate the pressure inside the balloon:

P = 2 N/m^2

So, the pressure inside the balloon is 2 N/m^2, which is also commonly referred to as 2 Pascal (Pa) since 1 Pascal is equal to 1 N/m^2.

Series (ckt II) will have greater resistor voltage equal to 20v as the voltage will add in series.

Battery current refers to the flow of electric charge in a circuit that is provided by a battery. In simpler terms, it is the amount of electric current that is being drawn from or supplied to a battery. Battery current is measured in amperes (A) and can be either positive or negative, depending on whether the battery is being charged or discharged.

When a battery is being discharged, the current flows from the battery's positive terminal through the external circuit and back to the negative terminal. This is referred to as the discharge current, and its magnitude is determined by the resistance of the circuit and the voltage of the battery.

Read more about resistor voltage here:

https://brainly.com/question/24858512

#SPJ1

The core will collapse under its own gravity, leading to a supernova explosion that expels the outer layers of the star into space, leaving behind either a neutron star or a black hole, depending on the mass of the core.

As the helium in the core is used up, the core will contract and heat up once again until it is hot enough to fuse heavier elements. This process will continue until the core is made up of iron, which cannot be fused further. At this point, the core will collapse under its own gravity, leading to a supernova explosion that expels the outer layers of the star into space, leaving behind either a neutron star or a black hole, depending on the mass of the core.

For high-mass stars, the process is similar, but the fusion reactions proceed more rapidly, leading to a shorter lifespan and a more violent supernova explosion. In both cases, the ultimate fate of the star depends on its mass and the resulting conditions in its core.

When the hydrogen in a star's core is used up, a series of events can occur depending on the mass of the star. For low to medium-mass stars, such as our Sun, the core will contract and heat up until it is hot enough to initiate the fusion of helium into carbon and oxygen. This process, known as the helium-burning phase, will cause the outer layers of the star to expand into a red giant.

To know more about neutron star, visit:

https://brainly.com/question/31087562

#SPJ1

A spinoff, in the context of the aerospace industry, refers to the transfer of technology or knowledge developed for a specific space or aviation program to other fields or industries.

The technology and knowledge developed for aerospace programs often have applications beyond the aerospace industry, and these applications can lead to the creation of new products, services, and industries.

For example, the development of lightweight, high-strength materials for use in spacecraft can also be applied to other industries such as the automotive, sporting goods, and construction industries. Similarly, the development of advanced computer systems and software for use in spacecraft can be applied to other industries such as healthcare, finance, and telecommunications.

Spinoffs from the aerospace industry have contributed to the economy of Florida and the United States by creating new jobs, new products, and new industries. The transfer of technology and knowledge from the aerospace industry to other fields has also led to advancements in a wide range of areas, from medicine to transportation to telecommunications, that have improved the quality of life for people around the world.

To know more about aerospace industry, here

brainly.com/question/969035

#SPJ1

US President Biden signed an agreement to end the national emergency of COVID-19 in advance, but it was strongly opposed by the White House spokesman.

The new coronavirus SARS-CoV-2 is the cause of the extremely contagious disease COVID-19. The virus was discovered for the first time in Wuhan, China, in December 2019, and it spread fast over the world, causing a pandemic. When an infected person coughs, sneezes, or talks, respiratory droplets from their mouth or nose are the main means of disease transmission.

On April 10, 2023, President Biden approved legislation written by Republicans that put an end to the COVID-19 pandemic's state of emergency. Notwithstanding the fact that the White House intended to stop making emergency declarations on May 11, the GOP's proposed legislation received some bipartisan support in Congress. The measure, according to the White House, "would generate widespread turmoil and uncertainty throughout the health care system – for states, for hospitals and doctor's offices, and, most crucially, for tens of millions of Americans," A White House representative, however, downplayed the significance of the law, stating that the end of the emergency "does not affect our ability to wind down authorities in an orderly manner."

A White House representative later minimized the bill's effects, saying they would not have an impact on the scheduled wind-down of authority on May 11.

To know more about COVID-19, visit:

brainly.com/question/30975256

#SPJ1

Answer:

To find the net force acting on the object, we need to add the force components along each axis. We are given the acceleration components, which we can use to find the force components using Newton's second law:

F = ma

Along the x-axis:

F_x = ma_x = (11.7 kg)(0.67 m/s^2) = 7.839 N

Along the y-axis:

F_y = ma_y = (11.7 kg)(-0.63 m/s^2) = -7.371 N

The net force is the vector sum of the x and y components of force:

F_net = sqrt(F_x^2 + F_y^2) = sqrt((7.839 N)^2 + (-7.371 N)^2) = 10.925 N

Therefore, the magnitude of the net force acting on the object at time t = 4.47 s is 10.925 N.

The time interval between the man clapping and hearing his echo is approximately 1.75 seconds.

An echo is a repetition or reflection of a sound or signal. It can be caused by sound waves bouncing off a surface, signal interference, or the repetition of a message in communication.

The speed of sound in air at room temperature is approximately 343 meters per second. When a person claps, the sound waves propagate outward in all directions and reach the school building, where they bounce off and return to the person as an echo. The time it takes for the sound to travel the distance to the building and back to the person is the time interval between the clap and the echo.

To calculate the time interval, we can use the following formula:

time = distance / speed

where distance is the total distance traveled by the sound (twice the distance from the person to the school building), and speed is the speed of sound in air.

distance = 2 x 300m = 600m

speed = 343 m/s

time = 600m / 343 m/s = 1.75 seconds (rounded to two decimal places)

Therefore, the time interval between the man clapping and hearing his echo is approximately 1.75 seconds.

Learn more about echo here:

https://brainly.com/question/9527413

#SPJ9

Answer:

Below

Explanation:

In a mass-spring system that is oscillating horizontally, the energy changes between potential energy and kinetic energy. When the mass is at its maximum displacement from the equilibrium position, it has maximum potential energy and zero kinetic energy. As the mass starts to move towards the equilibrium position, its potential energy decreases while its kinetic energy increases. At the equilibrium position, the mass has zero potential energy and maximum kinetic energy. As the mass moves away from the equilibrium position, its kinetic energy decreases while its potential energy increases. This cycle repeats as long as the system is oscillating.

Now, if the support of the system is vibrating vertically, the energy changes that occur during horizontal oscillations cause the mass to move vertically as well. As the mass moves to its maximum displacement from the equilibrium position horizontally, it also moves upwards, gaining potential energy due to its increased height from the ground. As the mass moves towards the equilibrium position horizontally, it also moves downwards, losing potential energy and gaining kinetic energy due to its increased speed towards the ground. At the equilibrium position, the mass has zero potential energy but maximum kinetic energy, which is all in the vertical direction. As the mass moves away from the equilibrium position horizontally, it also moves upwards, gaining potential energy again. The cycle repeats, causing the mass to oscillate vertically as well.

Therefore, the energy changes that occur during horizontal oscillations in a mass-spring system can cause the system to vibrate vertically if the support is vibrating vertically.

Answer:

Flux = Area * Field

A1 = .1 m^3 * cos 64.5     since we need perpendicular area

A1 = .043  m^2          perpendicular to field

A2 = .1 m^3 * cos 45 = .071 m^2

A = (.071 - .043) m^2 = .028 m^2     change in area

Change in flux = .028 m^2 ^ .5 T = .014 T m^2

As per the given data, the speed of the 0.100 kg sphere when it has moved 0.150 m to the left from its initial position is 0.736 m/s.

Since only the gravitational forces are acting on the 0.100 kg sphere, we can use the conservation of energy principle to find its speed at any position.

We can use the initial position of the sphere as the reference point for potential energy and write the initial total energy as the sum of the potential energy and kinetic energy.

At any other position, the total energy will still be the sum of the potential energy and kinetic energy, but their values will be different.

The initial total energy of the system is:

E_i = m_0gh

Where m_0 is the mass of the 0.100 kg sphere, g is the acceleration due to gravity, and h is the height of the sphere above the reference position. In this case, h = 0.4 m.

The final total energy of the system is:

[tex]E_f = m_0v^2/2 + m_0gh_f[/tex]

Where v is the speed of the sphere, and h_f is the height of the sphere above the reference position at the final position.

Since the system is isolated, the initial and final energies must be equal:

E_i = E_f

[tex]m_0gh = m_0v^2/2 + m_0gh_f[/tex]

Solving for v, we get:

v = sqrt(2gh - 2gh_f)

To find the final height h_f, we can use the fact that the center of mass of the system remains fixed throughout the motion.

The initial center of mass is at a distance of 0.4 m from the center of the 5.00 kg sphere, and the masses of the 5.00 kg and 10.0 kg spheres are 5.00 kg and 10.0 kg, respectively.

Therefore, the initial center of mass is at:

x_cm,i = (0.4*0.1 + 5*0 + 10*0)/(0.1 + 5 + 10) = 0.032 m

where we have taken the x-axis to be horizontal and passing through the centers of the 5.00 kg and 10.0 kg spheres.

At the final position, the center of mass must still be at the same horizontal position:

x_cm,f = (5*0.1*(-0.15) + 10*0)/(0.1 + 5 + 10) = -0.011 m

where we have taken the leftward direction as positive.

The final height of the sphere is then:

h_f = 0.4 - x_cm,f = 0.4 + 0.011 = 0.411 m

Substituting the values of g, h, and h_f in the equation for v, we get:

v = sqrt(2*9.81*0.4 - 2*9.81*0.411) = 0.736 m/s (rounded to three significant figures)

Therefore, the speed of the 0.100 kg sphere when it has moved 0.150 m to the left from its initial position is 0.736 m/s.

For more details regarding sphere, visit:

https://brainly.com/question/11374994

#SPJ1

The velocity, measured in the Earth reference frame, of an inertial reference frame in which the cat's kinetic energy does not change is equal to the velocity of the skier before the collision. The velocity of the skier before the collision is 15 m/s.

According to the law of conservation of momentum, the total momentum before the collision must be equal to the total momentum after the collision. This can be expressed as m1*v1 + m2*v2 = (m1 + m2)*vf, where m1 and m2 are the masses of the skier and the cat respectively, v1 is the velocity of the skier, and vf is the velocity of the skier and the cat after the collision.

The kinetic energy converted to internal energy in the Earth reference frame can be determined by applying the law of conservation of momentum.

The amount of kinetic energy converted to internal energy can be calculated as follows:

m1*v1 = (m1 + m2)*vf

vf = (m1*v1)/(m1 + m2)

KE = (1/2)*m2*v2²

KE converted = KE initial - KE final

KE converted = (1/2)*m2*v2² - (1/2)*m2*((m1*v1)/(m1 + m2))²

KE converted = (1/2)*m2*v2² - (1/2)*m2*((60*15)/(60 + 5))²

KE converted = (1/2)*5*3.8² - (1/2)*5*(15²/65)

KE converted = 28.8 - 22.15

KE converted = 6.65 J

The velocity, measured in the Earth reference frame, of an inertial reference frame in which the cat's kinetic energy does not change is equal to the velocity of the skier before the collision.

For more questions related to kinetic energy

https://brainly.com/question/8101588

#SPJ1

(a)

To find the current flowing through each resistor, we can use Ohm's Law, which states that the current (I) through a resistor is equal to the voltage (V) across the resistor divided by the resistance (R) of the resistor:

I = V / R

As there is only one path for the current to go in the series circuit, the current flowing through both resistors is the same.

We can determine the current flowing through the circuit using the values provided in the problem by doing the following:

Total resistance (Rt) = 47 Ώ + 28 Ώ = 75 Ώ

Total current (It) = V / Rt = 12 V / 75 Ώ = 0.16 A

Therefore, the current flowing through each resistor is 0.16 A.

(b)

We may apply Ohm's Law once more to determine the voltage difference between each resistor, but this time we will solve for the voltage:  

V = I x R              

The voltage difference across each resistor can be determined using the values provided in the problem as follows:

Voltage across 47 Ώ resistor = 0.16 A x 47 Ώ = 7.52 V

Voltage across 28 Ώ resistor = 0.16 A x 28 Ώ = 4.48 V

Therefore, the voltage difference across the 47 Ώ resistor is 7.52 V, and the voltage difference across the 28 Ώ resistor is 4.48 V.

To learn more about resistor

https://brainly.com/question/31483369

Answer:

9N

Explanation:

The difference between the weight of the brick in air and the weight of the brick underwater is equal to the buoyant force exerted by the water on the brick.

Weight of the brick in air = 21 N

Weight of the brick underwater = 12 N

Therefore, the buoyant force exerted by the water on the brick is:

Buoyant force = Weight of the brick in air - Weight of the brick underwater

Buoyant force = 21 N - 12 N

Buoyant force = 9 N

So the size of the buoyant force exerted by the water on the brick is 9 N. Answer: 9N.

Hope this helps!

Ja Morant's total hang time is 0.53 seconds.

The initial vertical velocity, Vi, is 0 since he starts from rest. The final vertical displacement, Δy, is 1.35m. We can assume that air resistance is negligible, so we can use the acceleration due to gravity, g, which is -9.81 m/s².

To find the speed he leaves the ground, we can use the equation:

Vf² = Vi² + 2gΔy

Vf² = 0 + 2(-9.81)(1.35)

Vf = 5.89 m/s

Therefore, Ja Morant leaves the ground at a speed of 5.89 m/s.

To find the total hang time, we can use the equation:

Δy = ViT + 1/2 gT²

1.35 = 0T + 1/2(-9.81)T²

[tex]T = \sqrt{(2(1.35)/9.81)[/tex]

T = 0.53 seconds

To know more about initial vertical velocity, here

brainly.com/question/18965435

#SPJ1

Answer:

P V = N R T   ideal gas equation

V2 / V1 = T2 / T1      since P, N, R are constant

V2 = 573 / 303 * V1 = 1.89 V1

V = π R^2 h     volume of cylinder

V1 = 3.14 * .05^2 * h1 = .00785 h1

V2 = .0148 h1

A (h1 + h)  = A * h2

h = h2 - h1 = (.0148 - .00785) h1 = .00695 h1     distance moved by piston

Use V1 = N R T1 / P1 = A h1     to calculate h1

h1 = N R T1 / (A * P1)      A * F/A = F        to simplify denominater

h1 = .37 * 8.31 * 303 / (50 * 9.8) = 1.90 m     P = F / A

Δh = .00695 h1 = .0132 m = 1.32 cm

Math should be checked!

Answer: 1.68 A (Amperes)

Explanation:

To calculate the current flowing through the silicon rod, we need to use Ohm's law, which states that the current (I) flowing through a conductor is equal to the voltage (V) applied across it divided by the resistance (R) of the conductor:

I = V/R

The resistance (R) of the silicon rod can be calculated using the formula:

R = ρL/A

where ρ is the resistivity of silicon, L is the length of the rod, and A is the cross-sectional area of the rod.

The resistivity of pure silicon at room temperature is approximately 2.3 x 10^-3 Ω m. The cross-sectional area of the rod can be calculated using the formula for the area of a circle:

A = πr^2

where r is the radius of the rod, which is half of its diameter. Substituting the given values, we get:

r = 2.54/2 = 1.27 cm = 0.0127 m

A = π(0.0127)^2 = 5.083 x 10^-4 m^2

Now we can calculate the resistance of the rod:

R = (2.3 x 10^-3 Ω m)(20.0 cm/100 cm)/5.083 x 10^-4 m^2 = 9.035 Ω

Finally, we can use Ohm's law to calculate the current flowing through the rod:

I = V/R = (1.00 x 10^3 V)/9.035 Ω = 1.68 A

Therefore, the current flowing through the silicon rod is 1.68 Amperes.

The gauge pressure of the water at the exit end of the pipe is -1281.125 kPa. Note that the negative sign indicates that the pressure is below atmospheric pressure, as gauge pressure is measured relative to atmospheric pressure.

What is Atmospheric Pressure?

Atmospheric pressure, also known as air pressure, is the force per unit area exerted by the weight of the Earth's atmosphere on a surface. It is the pressure exerted by the air molecules in the Earth's atmosphere due to their gravitational attraction towards the center of the Earth. Atmospheric pressure is caused by the weight of the air above a given surface pressing down on it.

To solve this problem, we can apply Bernoulli's equation, which relates the pressure, velocity, and height of a fluid flowing through a pipe.

We can start by calculating the velocity at the exit using the equation of continuity, which states that the mass flow rate of an incompressible fluid remains constant along a streamline:

Substituting the given values:

[tex]V^{2}[/tex] = (0.025[tex]m^{2}[/tex] * 2.5 m/s) / 0.010 [tex]m^{2}[/tex]

[tex]V^{2}[/tex] = 62.5 m/s

Now, we can substitute the known values into Bernoulli's equation to find the gauge pressure at the exit:

[tex]P^{2}[/tex]= P1 + (1/2)ρ([tex]v1^{2}[/tex] - [tex]v2^{2}[/tex])

[tex]P^{2}[/tex]= 46 kPa + (1/2) * 1000 kg/m^3 *[tex](2.5 m/s)^{2}[/tex] - [tex](62.5 m/s)^{2}[/tex]

[tex]P^{2}[/tex] = 46 kPa + 625 kPa - 1953.125 kPa

[tex]P^{2}[/tex] = -1281.125 kPa

Learn more about Atmospheric Pressure from the given link

https://brainly.com/question/19587559

#SPJ1

You should use the error propagation formulas to calculate the uncertainties of the final result for any given mathematical operation.

When propagating uncertainties using the error propagation formulas, the rules for adding, subtracting, multiplying, and dividing depend on the specific mathematical function being applied. It's essential to use the appropriate formula for each function to obtain accurate results.

Therefore, you should use the error propagation formulas to calculate the uncertainties of the final result for any given mathematical operation. These formulas take into account the uncertainties of the individual components and the functional relationship between them, and provide a more accurate way to estimate the overall uncertainty of the final result.

Read more about Uncertainty

brainly.com/question/1970053

#SPJ1

The magnitude of the resulting angular acceleration about the pivot point is approximately 0.0021 rad/s^2.

To solve this problem, we need to use the equation for the torque on a rigid body:

τ = Iα

where τ is the torque, I is the moment of inertia, and α is the angular acceleration. We can also use the fact that the torque is given by:

τ = r × F

where r is the vector from the pivot point to the point of application of the force, and F is the force. The vector cross product r × F gives the torque about the pivot point.

First, we need to find the vector r. Since the force is acting at an angle of 95° to the horizontal, the vertical component of the force is given by:

Fy = F sin(95°) = 1.5 sin(95°) ≈ 0.15 N

The horizontal component of the force is given by:

Fx = F cos(95°) = 1.5 cos(95°) ≈ 0.04 N

The vector r points vertically downward from the pivot point and has a magnitude equal to half the length of the rod:

|r| = 0.5(1.9 m) = 0.95 m

Therefore, the vector r is given by:

r = -0.95j

where j is the unit vector in the vertical direction.

The torque about the pivot point is given by:

τ = r × F = (-0.95j) × (0.04i + 0.15j) = -0.15k

where i is the unit vector in the horizontal direction and k is the unit vector in the direction perpendicular to the plane of the rod and pointing out of the page.

Substituting the moment of inertia and torque into the equation for angular acceleration, we have:

α = τ/I = (-0.15k)/(930.02/12) ≈ -0.0021 rad/s^2

Therefore, the magnitude of the resulting angular acceleration about the pivot point is approximately 0.0021 rad/s^2.

Learn more on  angular acceleration here https://brainly.com/question/1980605

#SPJ1

The ratio of density of fluid A to that of fluid B is 1/3.

From the figure,

The distance of the fluid A to the line B from the top of the fluid, d₁ = 3h

The distance of the fluid B to the line B from the top of the fluid, d₂ = h

According to Pascal's law, pressure of A is equal to that of B, along the same horizontal line.

P(A) = P(B)

ρ₁gd₁ = ρ₂gd₂

Therefore, the ratio of density of fluid A to that of fluid B,

ρ₁/ρ₂ = d₂/d₁

ρ₁/ρ₂ = h/3h

ρ₁/ρ₂ = 1/3

To learn more about density of fluids, click:

https://brainly.com/question/24280763

#SPJ1

Your question was incomplete. Attaching the image file here.

The buoyant force acting on the ball is 5134.7 N and the water displaced by the ball is 0.5236 [tex]m^{3}[/tex] (or 523.6 L).

We use the following formula:

Weight of displaced water = Buoyant force

Volume of water displaced times water's density equals the weight of the water.

The first step is to calculate the volume of the ball:

Volume of ball = ([tex]\frac{4}{3}[/tex]) × π × [tex]\frac{diameter}{2}^3[/tex]

Volume of ball = ([tex]\frac{4}{3}[/tex]) × π × [tex](\frac{50 cm}{2})^3[/tex]

Volume of ball = 0.5236 [tex]m^{3}[/tex]

Next, calculate water displaced:

Density of water = 1000 [tex]\frac{kg}{m^3}[/tex](at standard conditions)

Weight of water displaced = 1000 [tex]\frac{kg}{m^3}[/tex] × 0.5236 [tex]m^{3}[/tex]

Weight of water displaced = 523.6 kg

Finally, we can calculate the buoyant force:

Buoyant force = weight of water displaced

Buoyant force = 523.6 kg x 9.81 [tex]\frac{m}{s^2}[/tex]

Buoyant force = 5134.7 N

To know more about buoyant force, visit:

https://brainly.com/question/15706301

The difference between an atom's mass number (A) and atomic number (Z) is equal to the number of neutrons.

1) H – Hydrogen - 1 proton, 1 electron, 0 neutrons

2) He – Helium - 2 protons, 2 electrons, 2 neutrons

3) Li – Lithium - 3 protons, 3 electrons, 4 neutrons

4) Be – Beryllium - 4 protons, 4 electrons, 5 neutrons

5) B – Boron - 5 protons, 5 electrons, 6 neutrons

6) C – Carbon - 6 protons, 6 electrons, 6 neutrons

7) N – Nitrogen - 7 protons, 7 electrons, 8 neutrons

8) O – Oxygen - 8 protons, 8 electrons, 8 neutrons

9) F – Fluorine - 9 protons, 9 electrons, 10 neutrons

10)Ne – Neon - 10 protons, 10 electrons, 10 neutrons

11) Na – Sodium - 11 protons, 11 electrons, 12 neutrons

12) Mg – Magnesium - 12 protons, 12 electrons, 12 neutrons

13) Al – Aluminium - 13 protons, 13 electrons, 14 neutrons

14) Si – Silicon - 14 protons, 14 electrons, 14 neutrons

15) P – Phosphorus - 15 protons, 15 electrons, 17 neutrons

16) S – Sulphur - 16 protons, 16 electrons, 16 neutrons

17) Cl – Chlorine - 17 protons, 17 electrons, 18 neutrons

18) Ar – Argon - 18 protons, 18 electrons, 22 neutrons

19) K – Potassium - 19 protons, 19 electrons, 20 neutrons

20) Ca – Calcium - 20 protons, 20 electrons, 28 neutrons

To learn more about atomic number, click:

https://brainly.com/question/8834373

#SPJ1

Answer:

[tex]0.225\; {\rm \Omega}[/tex] (assuming that internal resistance in the battery is negligible.)

Explanation:

Let [tex]R[/tex] denote the resistance of this resistor.

Let [tex]V[/tex] denote the voltage across this resistor. In this question, it is given that [tex]V = 1.5\; {\rm V}[/tex].

By Ohm's Law, the current [tex]I[/tex] going through this resistor would be equal to:

[tex]\displaystyle I = \frac{V}{R}[/tex].

The power [tex]P[/tex] consumed in an electric circuit is equal to the product of voltage and current:

[tex]P = V\, I[/tex].

Substitute [tex]I = (V / R)[/tex] into this equation:

[tex]\displaystyle P = \frac{V^{2}}{R}[/tex].

Rearrange to find resistance [tex]R[/tex]:

[tex]\begin{aligned} R &= \frac{V^{2}}{P} \\ &= \frac{(1.5\; {\rm V})^{2}}{(10\; {\rm W})} \\ &=0.225\; {\rm \Omega}\end{aligned}[/tex].