How does increasing quantum/time-slice impact the
different scheduling criteria?

A. distillation column. which is a vertical pipe used to separate the components of crude oil through heat.

A distillation column is a vital component in the refining process of crude oil. Crude oil is a complex mixture of different hydrocarbons that have different boiling points. The distillation column utilizes this property by heating the crude oil at the bottom of the column and then allowing it to rise through a series of trays or packing materials. As the vapors rise, the temperature decreases, and different components condense at different heights. The heavier components condense at the bottom of the column, while the lighter ones condense at the top. These components can then be collected and processed further. The distillation column is a critical piece of equipment in the petroleum industry and is used to produce a variety of products like gasoline, diesel fuel, and jet fuel. It plays a crucial role in meeting the demand for transportation fuels and other petroleum-based products.

Learn more about distillation column here:

https://brainly.com/question/30893971

#SPJ11

Point-to-point communications where both devices can transmit and receive on the medium at the same time are known as full-duplex communications.

Communications is the process of transmitting information and ideas from one individual or group to another. It involves the use of various methods and technologies, such as language, writing, telephones, email, video conferencing, and social media. Effective communication requires not only clear and concise messaging but also active listening and feedback. It is a vital component of personal and professional relationships, as well as business, politics, education, and healthcare. Good communication skills can enhance teamwork, build trust, resolve conflicts, and facilitate understanding and cooperation among people from different backgrounds and cultures. In today's globalized and interconnected world, effective communication has become more critical than ever before.

Learn more about communications here:

https://brainly.com/question/14894492

#SPJ11

The minimum thickness for asphalt being placed over an ARMI layer is 2 inches.

The term "ARMI" refers to the Asphalt-Rubber Membrane Interlayer, a kind of interlayer used in the building of pavements to lessen cracking and increase longevity. Depending on the exact application, the ARMI layer's thickness can change, but the asphalt layer that is laid on top of it should always be at least 2 inches thick. This thickness guarantees optimal compaction and performance of the asphalt layer as well as enough protection for the ARMI layer. It's crucial to remember that some project needs and design factors can necessitate a varied asphalt layer thickness.

learn more about lessen cracking here:

https://brainly.com/question/31393555

#SPJ11

 In the new service or product development process, the design stage is critical because it establishes the blueprint for the entire service or product, ensuring its functionality, appeal, and efficiency. This stage involves refining ideas, conducting research, and developing prototypes, ultimately setting the foundation for successful development and launch of the service or product.

In the new service or product development process, the design stage is critical because it lays the foundation for the entire project. This is where the team determines the overall look and feel of the service or product and ensures it aligns with the company's brand and mission. The design stage also involves making important decisions about the functionality and usability of the service or product. If any flaws or issues are identified at this stage, they can be addressed before moving forward with development. Therefore, the design stage is essential to the success of the overall service or product development process.

Learn more about aligns here-

https://brainly.com/question/14396315

#SPJ11

It should be noted that for both information, neither technicians are correct.

Neither of the Technician A and Technician B are right. If both the DPF warning lamp and the red engine protection system alert light are flashing, then there is a severe issue that requires an immediate reaction from an authorized technician.

It should be noted that to be able to determine the root cause of the trouble, extra diagnostic testing should be done.

Learn more about technician on

https://brainly.com/question/18428188

#SPJ1

a. Compressor work: 2665 kJ/s

b. Turbine work: 3960 kJ/s

c. Heat supplied: 4220 kJ/s

d. Thermal efficiency: 30.6%

Assuming a simple Brayton cycle for the gas turbine, and given:

Pressure ratio (rp) = 6

Inlet pressure (P1) = 1.013 bar

Inlet temperature (T1) = 288 K

Turbine inlet temperature (T3) = 700 °C = 973 K

Mass flow rate (m) = 10 kg/s

We'll use air as an ideal gas with constant specific heat ratios:

Specific heat at constant pressure (cp) = 1.005 kJ/(kg·K)

Specific heat at constant volume (cv) = 0.718 kJ/(kg·K)

Isentropic index (γ) = cp / cv = 1.4

a. Compressor work (Wc):

The temperature at the compressor exit (T2) can be calculated using the isentropic temperature relation:

T2 / T1 = (P2 / P1)^((γ - 1) / γ)

T2 = T1 * (rp)^((γ - 1) / γ) = 288 * (6)^((1.4 - 1) / 1.4) ≈ 553 K

Wc = m * cp * (T2 - T1) = 10 * 1.005 * (553 - 288) ≈ 2665 kJ/s

b. Turbine work (Wt):

The temperature at the turbine exit (T4) can be calculated using the isentropic temperature relation:

T4 ≈ 579 K

Wt = 3960 kJ/s

c. Heat supplied (Q):

Q = m * cp * (T3 - T2) = 10 * 1.005 * (973 - 553) ≈ 4220 kJ/s

d. Thermal efficiency (η):

η = (Wt - Wc) / Q = (3960 - 2665) / 4220 ≈ 0.306 or 30.6%

In summary:

a. Compressor work: 2665 kJ/s

b. Turbine work: 3960 kJ/s

c. Heat supplied: 4220 kJ/s

d. Thermal efficiency: 30.6%

Read more about Heat here:

https://brainly.com/question/934320
#SPJ1

D) The steam engine, which revolutionised transportation and made it possible for quicker and more effective travel on both land and sea, was the most significant advancement in transportation throughout the 18th century.

The most significant transportation improvement in the 18th century was the steam engine. It revolutionized transportation by making it faster, cheaper, and more efficient on both land and water. The steam engine powered trains, boats, and other vehicles, making it possible to transport goods and people over long distances more quickly than ever before. It also led to the growth of factories and industries, as it allowed for more efficient transportation of raw materials and finished goods. While canals also played an important role in transportation during this time, the steam engine had a far greater impact on transportation and the economy as a whole.

Learn more about Steam Engine Revolutionized Transportation here.

https://brainly.com/question/2268183

#SPJ11

Threads must carry within their own resources a data structure known as a Thread Control Block (TCB). The TCB contains information about the thread such as its current state, program counter, stack pointer, and other relevant information necessary for the operating system to manage the thread's execution. The TCB is typically stored in the kernel's memory space and accessed by the operating system when scheduling and managing threads.
Hi! Threads must carry their own stack as a part of their resources. The stack is a data structure that allows threads to store local variables, manage function calls, and handle return addresses, enabling each thread to execute independently within the same process.

The two messages that the client will typically broadcast on the network when attempting to lease an address through DHCP are, 1. DHCP Discover message and 2. DHCP Request message.

When a DHCP server is not available on the same network segment as a DHCP client, the technique that permits the DHCP client's initial DHCP broadcast requests to be serviced is called "DHCP Relay" or "DHCP Relay Agent."

A DHCP relay agent is used to forward the DHCP broadcast messages from the client to the DHCP server located on another network segment. his agent listens for DHCP broadcast requests from clients and forwards them to the DHCP server on a different network segment, allowing the server to allocate IP addresses and provide configuration information to the client.

The DHCP relay agent listens for DHCP broadcast messages and then forwards them to the appropriate DHCP server. This allows the DHCP client to obtain the necessary IP configuration information even if the DHCP server is located on a different network segment.

Learn more about DHCP here

https://brainly.com/question/31440711

#SPJ11

All extensions from flat cable assemblies shall be made by approved wiring methods, within the raceway, installed at either end of the flat cable assembly runs.

Back wire termination includes inserting stripped wiring method into a port for back wires and tightening a screw to keep it there. In the clamp and screw method of termination, stripped wire is inserted into a hole and secured with a screw. The stripped wire is pushed into a terminal and kept in place by spring pressure in a push-in/push-fit termination. Twisting two or more stripped wires together before encasing them in a plastic connector is how twist-on wire connectors, commonly referred to as wire nuts, work. Using a specialised tool, crimp the wire into a terminal, and then solder it for further security. In addition, stripping the wire and placing it into screw-on terminals

Learn more about wiring method here

https://brainly.com/question/30774629

#SPJ11

Anaerobic glycolysis (Glycogen-lactate, glycogen) is the main energy system and fuel source used by a basketball player on defence during a full court press or a 45–60 second shift in hockey.

In the absence of oxygen, glucose is broken down in anaerobic glycolysis, which generates ATP as a source of energy. This technique is used when engaging in high-intensity, brief-duration exercises including sprints, jumps, and fast movements like those necessary for a full court press in basketball or a shift in hockey. The main fuel source for anaerobic glycolysis is glycogen, which is kept in the muscles and liver. When glycogen is broken down, lactate is created, which can build up in the muscles and lead to weariness. Despite the fact that the ATP-PC (phospho-creatine) pathway also supplies energy during high-intensity exercises, it is only efficient for very brief bursts of activity and is not sustained for longer efforts like those required during a full court press or a shift in hockey.

learn more about energy system here:

https://brainly.com/question/3175688

#SPJ11

When the heat pump is supplying as much heat as the load requires and is operating continuously, it is at what is called the steady state. In the context of heat pumps, the steady state refers to a situation in which the heat pump is supplying heat to the space at a rate that exactly matches the heat loss from the space. In other words, the heat pump is meeting the demand for heat without any surplus or deficit.

For such more question on steady state

https://brainly.com/question/14774448

#SPJ11

True. If the classification in the existing content seems incorrect, or there is conflicting guidance from authorized sources, it is always a good practice to seek further guidance to ensure accuracy and compliance.

As a responsible and ethical content creator, it is important to ensure the accuracy and compliance of the content being produced. This includes verifying the classification of the content and seeking further guidance if necessary. If there is any doubt or conflicting guidance from authorized sources, it is always recommended to seek further clarification before publishing or sharing the content.

Ignoring or neglecting the classification of content can have serious consequences, including legal implications or reputational damage. Therefore, it is essential to take the time to review and verify the classification of the content and seek additional guidance if necessary.

Furthermore, seeking further guidance can also help to enhance the quality and credibility of the content being produced. By ensuring accuracy and compliance, content creators can build trust with their audience and establish themselves as reliable sources of information.

In summary, its true that seeking further guidance is an important step in ensuring the accuracy and compliance of content. It is a responsible and ethical practice that can help to avoid legal or reputational issues, enhance the quality of content, and build trust with the audience.

Learn more about content creation

brainly.com/question/30975508

#SPJ11

The airplane wing loading during a level coordinated turn in smooth air depends on three main factors: the rate of turn, the angle of the bank, and the true airspeed. The rate of turn is the speed at which the airplane is turning and is usually measured in degrees per second.

The angle of the bank is the angle between the wings and the horizontal plane, and it determines the amount of lift generated by the wings. Finally, the true airspeed is the speed of the airplane relative to the air around it and affects the amount of lift and drag generated by the wings. Together, these three factors determine the wing loading and the overall performance of the airplane during a turn.

In a level coordinated turn in smooth air, airplane wing loading depends on the following factors:

1. Angle of bank: As the angle of the bank increases, the load factor (and therefore wing loading) also increases. This is because the lift generated by the wings needs to counteract not only the aircraft's weight but also the centrifugal force acting on the aircraft during the turn.

2. True airspeed: Wing loading is also affected by true airspeed, as a higher true airspeed during the turn results in a greater load on the wings. This is due to the increased aerodynamic force acting on the wings as the airspeed increases.

The rate of turn is not a direct factor in determining wing loading during a level-coordinated turn in smooth air. Instead, the rate of turn is affected by the angle of the bank and true airspeed. So, the correct answer is that airplane wing loading during a level coordinated turn in smooth air depends upon the angle of the bank and true airspeed.

Learn more about airspeed here:- brainly.com/question/29597908

#SPJ11

The component of the air-to-air heat pump that is the outdoor unit when in cooling mode is known as the condenser.

The component of the air-to-air heat pump that is the outdoor unit and responsible for cooling mode is known as the condenser. This is a long answer, but it's important to understand the role of the outdoor unit in an air-to-air heat pump system.

Know more about the condenser

https://brainly.com/question/31540630

#SPJ11

The most important measurement to check and compare to manufacturer specifications for electronic resistance heating elements is the resistance value.

Resistance is a measure of the opposition to the flow of electric current, and it directly affects the amount of heat generated by the heating element.

If the resistance value is incorrect, the heating element may not produce the desired amount of heat or may consume more energy than necessary, which can result in decreased efficiency and increased operating costs.

Therefore, it is crucial to ensure that the resistance value of the heating element matches the manufacturer's specifications to ensure optimal performance and efficiency.

To measure the resistance of an electronic resistance heating element, a multimeter can be used. The multimeter is set to measure resistance, and the probes are placed on either end of the element. The multimeter will then display the resistance in ohms.

When comparing the measured resistance to the manufacturer's specifications, it is important to ensure that the measurement falls within the specified range.

If the measured resistance is outside the specified range, it could indicate a problem with the element, such as damage or degradation of the heating wire, or a manufacturing defect.

In summary, checking the resistance of electronic resistance heating elements is crucial for ensuring their performance and longevity.

For more question on "Resistance Value" :

https://brainly.com/question/28901275

#SPJ11

If the receiver detects an error on the basis of the value in the Frame Check Sequence (FCS) field, it will discard the frame and request retransmission of the data. The FCS field is a part of the data frame and is used for error detection purposes. It contains a checksum value that is calculated by the sender based on the data in the frame.

For such more question on checksum

https://brainly.com/question/24645641

#SPJ11

The correct answer is: Dynamic pressure, but varies with weight, bank angle, and pitch attitude.

The angle of attack at which a wing stalls is determined by the dynamic pressure of the air flowing over the wing, which is a function of airspeed and air density. However, this angle can be influenced by other factors such as weight, bank angle, and pitch attitude. For example, a heavier aircraft may require a higher angle of attack to maintain lift, while a steeper bank angle or a nose-up pitch attitude can also increase the angle of attack and potentially lead to a stall. Therefore, while dynamic pressure is the primary factor determining the stall angle, it is also affected by other variables. The angle of attack at which a wing stalls remains constant regardless of weight, dynamic pressure, bank angle, or pitch attitude.

Learn more about density here-

https://brainly.com/question/29775886

#SPJ11

In theory, if the airspeed of an airplane is doubled while in level flight, parasite drag will become B) half as great.

This is because parasite drag is directly proportional to airspeed, and doubling the airspeed will result in quadrupling the dynamic pressure (which is proportional to the square of airspeed). However, the lift generated by the wings is also proportional to dynamic pressure, so it will be four times greater at twice the airspeed.

This means that the airplane will need to fly at a lower angle of attack to maintain level flight, resulting in a lower amount of induced drag. The net effect is that the decrease in parasite drag will be greater than the increase in induced drag, resulting in a lower overall drag at twice the airspeed.

Option B is answer.

You can learn more about angle of attack at

https://brainly.com/question/29220903

#SPJ11

A condensing unit is typically installed about 3 to 10 feet away from a building.

A condensing unit, which is a vital component of an HVAC system, is typically installed a certain distance away from a building.

The distance can vary based on various factors such as the size of the unit, building codes, and manufacturer recommendations.
Explanation:
Determine the required distance:

The ideal distance is often specified in the manufacturer's guidelines.

In general, it can range from 18 inches to several feet away from the building.

This ensures adequate airflow and helps prevent overheating or inefficiency.
Consider building codes and regulations:

Local building codes and regulations may dictate the minimum distance between the condensing unit and the building. Be sure to consult these rules before installation to avoid any compliance issues.
Assess the location:

Choose a spot that provides sufficient clearance on all sides of the condensing unit.

This will help maintain proper airflow and prevent debris buildup, ensuring optimal performance and longevity of the unit.
Install the unit:

Once you have determined the appropriate distance and location, proceed with the installation following the manufacturer's instructions and local building code requirements.
A suitable distance between the condensing unit and the building is essential for efficient operation and to prevent potential issues such as noise, vibrations, and property damage.

For similar questions on typically

https://brainly.com/question/411733

#SPJ11

Duplex communication refers to the ability of data to flow across the cable in both directions simultaneously. In duplex communication, two devices can transmit and receive data at the same time, allowing for more efficient and faster communication. Duplex communication can be further classified into two types: half-duplex and full-duplex.

In half-duplex communication, data can flow in both directions, but only one device can transmit data at a time while the other device listens. This type of communication is commonly used in walkie-talkies and two-way radios.

In contrast, full-duplex communication allows both devices to transmit and receive data at the same time without any interruptions. Ethernet communication is an example of full-duplex communication, where data can flow in both directions simultaneously, enabling faster data transfer and improved network performance.

Learn more about Duplex communication here:

https://brainly.com/question/29998337

#SPJ11

For spraying operations confined to an enclosed spray booth or room, the space within 20 feet in any direction from any opening shall be considered Class 1 or Class 2, as per section 516.3 (4) of the International Fire Code (IFC).

This means that any areas beyond this distance will be classified as Class 3 or Class 4, depending on the level of hazard present. It is important to follow these regulations to ensure the safety of all individuals in the surrounding area. For spraying operations confined to an enclosed spray booth or room, the space within 5 feet in any direction from any opening shall be considered Class 1 or Class 2, as specified in the National Electrical Code, Section 516.3(4).

Learn more about enclosed here

https://brainly.in/question/10997054

#SPJ11

In C++, a copy constructor is a special member function that is used to create a new object as a copy of an existing object. The copy constructor is invoked whenever an object is initialized with another object of the same class, or when an object is passed as an argument to a function by value.

To define a copy constructor in a class, you can declare a member function with the same name as the class, and taking a reference to an object of the same class as a parameter.

For example:

```
class MyClass {
public:
 MyClass(const MyClass& other) {
   // copy constructor code here
 }
};
```

When the compiler encounters a member function with this signature, it recognizes it as a copy constructor and generates the appropriate code to perform the copying. The compiler distinguishes the copy constructor from other member functions based on its signature, which must match the pattern of taking a reference to an object of the same class.

In summary, the compiler knows that a member function is a copy constructor by looking at its signature and matching it to the pattern of a copy constructor.

Learn more on copy constructor  here : brainly.in/question/14435777

#SPJ11

The general solution to the differential equation is y =  c1 e^(x/2) cos(√3x/2) + c2 e^(x/2) sin(√3x/2) + (1/10) e^(x/2) cos(x/2) - (3/10) e^(x/2) sin(x/2)

What is the general solution of the equation

To solve the differential equation y''-2y+4y = e^(x/2) cos(x/2), we first need to find the characteristic equation. The characteristic equation is obtained by assuming that the solution to the homogeneous part of the equation (y''-2y+4y=0) is of the form y = e^(rx).

Substituting this into the homogeneous part of the equation, we get:

r^2 e^(rx) - 2re^(rx) + 4e^(rx) = 0

Dividing both sides by e^(rx) (since e^(rx) is non-zero), we get:

r^2 - 2r + 4 = 0

Solving for r using the quadratic formula, we get:

r = (2 ± √(4-4(1)(4))) / 2

r = 1 ± i√3

Therefore, the homogeneous solution is y_h = c1 e^(x/2) cos(√3x/2) + c2 e^(x/2) sin(√3x/2).

Now, we need to find a particular solution to the non-homogeneous part of the equation, which is of the form e^(x/2) cos(x/2).

We can use the method of undetermined coefficients to find a particular solution. Since the non-homogeneous part of the equation is of the form e^(x/2) cos(x/2), we assume that the particular solution is of the form:

y_p = Ae^(x/2) cos(x/2) + Be^(x/2) sin(x/2)

Taking the first and second derivatives of y_p, we get:

y_p' = (A + B/2) e^(x/2) cos(x/2) + (-A/2 + B) e^(x/2) sin(x/2)

y_p'' = (-A/2 - B/4) e^(x/2) cos(x/2) + (A/4 - B/2) e^(x/2) sin(x/2)

Substituting these expressions into the original equation and equating coefficients of like terms, we get:

(-A/2 - B/4 + A) e^(x/2) cos(x/2) + (A/4 - B/2 + B) e^(x/2) sin(x/2) - 2(Ae^(x/2) cos(x/2) + Be^(x/2) sin(x/2)) + 4(Ae^(x/2) cos(x/2) + Be^(x/2) sin(x/2)) = e^(x/2) cos(x/2)

Simplifying and solving for A and B, we get:

A = 1/10

B = -3/10

Therefore, the particular solution is:

y_p = (1/10) e^(x/2) cos(x/2) - (3/10) e^(x/2) sin(x/2)

The general solution to the differential equation is then given by the sum of the homogeneous and particular solutions:

y = y_h + y_p

= c1 e^(x/2) cos(√3x/2) + c2 e^(x/2) sin(√3x/2) + (1/10) e^(x/2) cos(x/2) - (3/10) e^(x/2) sin(x/2)

Learn more about differential equation here: https://brainly.com/question/28099315

#SPJ1

If you need to find emergency procedures for HAZMAT with ID number UN1203, you should start with Section 3 of the Emergency Response Guidebook (ERG).

To find emergency procedures for HAZMAT with ID number UN1203, you should start with the ERG (Emergency Response Guidebook) section known as the "Yellow-bordered pages," where you can locate the substance by its UN number. In this case, look for UN1203, and it will direct you to the appropriate guide number for handling emergency procedures involving that specific hazardous material.

This section contains information on the hazards and safety precautions associated with flammable liquids, including UN1203. It also provides guidance on initial isolation and protective action distances and provides instructions on how to handle spills, leaks, and fires.

Learn more about ID numbers:

brainly.com/question/15159473

#SPJ11

This facility's access control procedure is designed to prevent unauthorized individuals from removing government assets from the area.

This procedure acts as both a deterrent and a detection method for contraband. The facility access control procedure you described, which focuses on preventing the unauthorized removal of government assets.

And serves as both a deterrent and a means for detecting contraband, is part of a comprehensive security plan or policy.

Learn more about government click here:

brainly.com/question/9201836

#SPJ11

False. Timer instructions are a common feature in most PLCs manufactured today.

PLC stands for Programmable Logic Controller. It is a digital computer used in industrial automation and control systems to control machines and processes. PLCs are designed to withstand harsh industrial environments and operate reliably for extended periods of time.

PLCs are programmed using specialized software and are typically used to monitor inputs from sensors and other devices and control outputs to motors, valves, and other equipment. They can be used to automate a wide range of processes, including manufacturing, assembly, and material handling.

PLCs offer a range of features, including high-speed processing, real-time control, and the ability to interface with other systems and devices. They are an essential component of modern industrial automation systems and are used in many industries, including automotive, food and beverage, and chemical manufacturing.

Learn more about PLC here:

https://brainly.com/question/31059116

#SPJ11

The answer to your question is that metal faceplates operating at over 50 volts shall be permitted to be grounded by means of metal mounting screws, as specified in code section 517.13 (B). It is important to note that grounding is essential for the safe and proper functioning of electrical equipment and circuits.

A grounding connection ensures that any stray electrical current is safely directed to the earth, preventing potential damage or harm to people or property.
In the case of metal faceplates, which are commonly used in electrical installations to cover and protect electrical outlets and switches, grounding is particularly important. Metal faceplates can conduct electricity, and if they are not properly grounded, they can pose a safety hazard to anyone who comes into contact with them.

By using metal mounting screws to ground metal faceplates, the screws provide a direct path to the earth, which can effectively dissipate any electrical charges that may be present. This grounding method is both effective and easy to implement, making it a popular choice for many electrical installations.
In summary, when working with metal faceplates operating at over 50 volts, it is essential to ensure that they are properly grounded using metal mounting screws to prevent any potential safety hazards.

To summarize the process: when installing metal faceplates for electrical equipment operating at over 100 volts, it is crucial to ensure that the faceplates are properly grounded to maintain safety and prevent potential electrical hazards. This can be achieved by using metal mounting screws, which create a secure connection between the metal faceplate and the grounded equipment, forming a safe path for any potential electrical faults or surges. By following this guideline, you can ensure the safe operation of your electrical equipment while complying with the NEC regulations.

Learn more about metal at : brainly.com/question/28650063

#SPJ11

The correct time zone file is contained in the /usr/share/zoneinfo directory. In addition to /etc/localtime, some Linux distributions also have an /etc/timezone text file that contains a reference to the correct time zone file. This file is contained in the following directory.

The most widely used Linux graphical user interface is the GNOME (GNU Network Object Model Environment) Desktop, which can be found in Fedora, Debian, and other Linux distributions.

A graphical user interface (GUI) is a visual representation of an application's functionality, allowing users to interact with the application using icons, buttons, and other graphical components. It makes using the operating system more manageable and more intuitive by allowing users to perform tasks without needing to memorize a large number of commands or understand complex procedures.

Your answer: /usr/share/zoneinfo

To know more about Linux distributions:- https://brainly.com/question/31164630

#SPJ11

Hi! In addition to /etc/localtime, some Linux distributions also have an /etc/timezone text file that contains a reference to the correct time zone file contained in the /usr/share/zoneinfo directory.

Learn more about zone file: https://brainly.com/question/31558819

#SPJ11

Answer: True. A junction box used with a cellular metal floor raceway should be level with the floor grade, sealed against the entrance of water or concrete, and be made of metal to ensure electrical continuity.

The definition of electric current is the rate of charge flow given by

Since there is a constant flow of charge in this instance, we know that electric current also exists.

The electrical continuity instantaneous discharge of charge particles that have accumulated at a certain spot called static electricity.

If a body part is substantially charged, we can state that when it comes into contact with another body with a lower potential, the heavy charge will instantly discharge.

As a result, it is an instantaneous current that flows for a brief period of time.

so the right response will be Static electricity is not continuous, whereas electric current is.

Learn more about electrical continuity here

https://brainly.com/question/12791045

#SPJ11