Answer:
See The Explanation
Explanation:
Resistant pests are becoming an increasingly pressing issue in crop production, and they are likely to have a significant impact on the future of agriculture. Here are a few ways that resistant pests could affect crop production in the coming years:
Increased Costs: As pests become more resistant to traditional pesticides, farmers may need to use more expensive and specialized chemicals to control them. This could drive up the costs of crop production, making it more difficult for farmers to stay competitive and profitable.
Reduced Yields: Resistant pests can also cause significant damage to crops, reducing yields and quality. This can result in lower revenues for farmers and higher prices for consumers.
Environmental Impacts: The use of specialized chemicals to control resistant pests could also have negative environmental impacts, such as increased pollution and harm to non-target species. This could lead to increased regulation and public pressure on farmers to adopt more sustainable practices.
Shifts in Crop Selection: In some cases, farmers may need to shift their crop selection to varieties that are more resistant to pests. This could result in changes to the types of crops that are grown in certain regions, potentially impacting local economies and food systems.
Advancements in Pest Management: However, the challenge of resistant pests is also driving advancements in pest management techniques, such as biological control and integrated pest management. These approaches can help farmers reduce their reliance on chemical pesticides and reduce the risk of resistance.
In summary, resistant pests are likely to have a significant impact on crop production in the coming years, but the full extent of that impact remains to be seen. By adopting new pest management techniques, investing in research and development, and promoting sustainable agriculture practices, farmers can help mitigate the risks of resistant pests and continue to provide high-quality crops to consumers.
The presence of resistant pests can have a significant impact on future crop production which include Decreased crop yields, Increased reliance on alternative pest control methods, and the Development and use of new pesticides.
The impacts of resistant pests on crop production are multifaceted and can vary depending on the specific pest, crop, and geographic region.
Decreased crop yields: Resistant pests have the ability to withstand the effects of pesticides or other control measures that were previously effective. Increased reliance on alternative pest control methods: With the rise of resistant pests, farmers may need to explore and adopt alternative methods of pest control. Development and use of new pesticides: The emergence of resistant pests often necessitates the development and use of new pesticides or pest control methods. The continuous reliance on chemical pesticides alone can lead to a cycle of resistance development and pose risks to human health and the environment.Thus, future crop production may be significantly impacted by the presence of pests that are resistant, including decreased crop yields, a greater reliance on alternative pest control strategies, and the development and usage of new pesticides.
To know more about Crop production, click here:
https://brainly.com/question/14512816
#SPJ4
What do businesses in the turfgrass industry produce, and how much does this industry contribute to the US economy?
What percent of the turf area in the United States is for lawns and what are the other uses of turf?
What are some benefits of turf for people and for the environment?
What are some benefits unique characteristics of turf grass that espérâtes it from other plants?
List the unique morphological structures of grasses that can be used to identify them
Describe the three shapes that a grass leaf blade may have
Describe the three growth habits of turf grasses
How are warm-season grasses affected if they are grown in an area where temperatures
Name four grasses suitable for the transition zone
When is the best time of year to establish a lawn with cool-season grasses and what are two methods used?
Why should a grower use certified seed for establishing a lawn?
Answer:
Explanation:
The turfgrass industry produces and sells turfgrass products such as sod, seed, and artificial turf. According to a report by the National Turfgrass Federation, the turfgrass industry contributes approximately $82 billion annually to the US economy.
Approximately 80-90% of the turf area in the United States is used for lawns, while the remaining turf areas are used for athletic fields, parks, golf courses, and other recreational purposes.
Turf provides many benefits for people and the environment. It helps to reduce soil erosion, filter pollutants from water, and provide a cooling effect. It also provides a safe playing surface for sports and recreational activities and adds aesthetic value to landscapes.
Some unique characteristics of turfgrass include the ability to recover quickly from damage, the ability to spread and form a dense turf, and the ability to grow in a wide range of soil types and environmental conditions.
Some morphological structures of grasses that can be used to identify them include leaf blade shape, leaf arrangement, and ligule shape and size.
The three shapes that a grass leaf blade may have are flat, folded, or rolled.
The three growth habits of turf grasses are stoloniferous, rhizomatous, and bunch-type.
Warm-season grasses may be affected if they are grown in an area where temperatures drop below their optimal growth range. They may become dormant during the winter or suffer from frost damage.
Four grasses suitable for the transition zone are tall fescue, Kentucky bluegrass, perennial ryegrass, and fine fescue.
The best time of year to establish a lawn with cool-season grasses is in the fall or early spring when temperatures are cooler and there is more rainfall. Two methods used for establishing a lawn with cool-season grasses are seeding and sodding.
A grower should use certified seed for establishing a lawn to ensure that the seed is of high quality, genetically pure, and free of weed seeds and other contaminants. Certified seed is also more likely to produce a uniform stand of grass.
Which sentence is true?
A
B
C
Root cap
Apical meristem
at root tip
A. Cell division takes place in section C, at the tip of the root.
B. Cell division takes place in section B, just above the tip of the root.
C. Cell division takes place in section A, far above the tip of the root.
D. Cell division takes place in all parts of the root.
The right answer is: "A. Cell division occurs in section C, at the root's tip.
Which root cause is related to cell division?The meristematic zone is located just above the root cap. As fresh cells are added, the cells in this zone continue to divide.Just under the root cap is the area where cells divide. Since cells in this area are constantly dividing (mitosis), there is a continuous production of new cells, which causes the root to expand in length (primary growth).
What role does root play?Anchoring the plant, absorbing water and dissolving minerals and transferring them to the stem, and storing reserve food are its main purposes.
To know more about root's tip visit:-
https://brainly.com/question/8647279
#SPJ1
DNA can only be used as a code for making
Answer:
the proteins and molecules essential for our growth, development and health.
Explanation:
As humans, we all are made up of DNA.
Part B click on the map titled "U.S. geothermal resource map." The map shows the approximate temperature of rock at a depth of 6 kilometers throughout the Unites States. Based on the data shown in this map, which parts of the country are best suited for the production of electricity ising geothermal energy?
Based on the U.S. geothermal resource map, the best parts of the country suited for the production of electricity using geothermal energy are the western states, including parts of California, Nevada, Utah, Oregon, and Idaho.
These regions have the highest temperatures at depths of 6 kilometers, indicating that there is a significant amount of geothermal energy that could be harnessed for electricity production.
In particular, the map shows that the region around the Nevada-California border has the highest temperatures, with rock temperatures exceeding 300 degrees Celsius at depths of 6 kilometers. This makes it one of the most promising areas for geothermal energy production in the United States.
To know more about geothermal resource map here
https://brainly.com/question/11203405
#SPJ1
Answer: The western United States has hotter rock formations. So, this region is better suited for the production of electricity using geothermal energy.
Explanation: edmentum answer
Which step happens first in secondary succession?
Responses
Grasses, flowers, and mosses colonize the soil.
Bushes and shrubs return and create a shaded environment.
Bare rock is broken down by roots and lichen to form soil.
Seedlings grow into saplings and then taller trees.
Answer: Grasses, flowers, and mosses colonize the soil.
Explanation:
I took the test and got 5/5
50 Points, at least 1-3 sentences.
how do the skulls of early ancestors compare to modern-day human skulls?
Answer:
Daniel Lieberman can see millions of years of human evolution at a glance. The collection of skulls on his office shelves come from chimpanzees, long-extinct humans, and modern men and women. The hollow eye sockets, ancient teeth, and empty skulls pose the same question every day: What made us different from our archaic ancestors?
Explanation:
i hope this helps.
Will give brainy!
Analyze the given diagram of the carbon cycle below. (10 points)
Part 1: Which process does arrow F represent?
Part 2: Explain how matter is conserved during the process.
Part 3: Justify why this process is a recycling of carbon in the carbon cycle.
Use complete sentences to explain your answer.
Answer:
Part 1: Arrow F represents the process of decomposition in the carbon cycle.
Part 2: During the process of decomposition, organic matter such as dead plants and animals are broken down by bacteria and fungi into simpler inorganic compounds like carbon dioxide and water. In this process, matter is conserved because the total amount of carbon and other elements present in the organic matter before decomposition is the same as the total amount of carbon and other elements present in the inorganic compounds that result from decomposition.
Part 3: Decomposition is a recycling of carbon in the carbon cycle because it converts organic carbon compounds back into inorganic carbon compounds such as carbon dioxide, which can be used again by plants for photosynthesis. The carbon dioxide released during decomposition can enter the atmosphere and be taken up by plants during photosynthesis, which is the process by which plants convert carbon dioxide into organic molecules. Therefore, decomposition plays an essential role in returning carbon from dead organisms back into the atmosphere or soil, where it can be reused by living organisms in the carbon cycle.
Explanation:
I hope this might help you :)
Arrow F in the given diagram represents the process of respiration in the carbon cycle. During respiration, living organisms, such as plants and animals, release carbon dioxide into the atmosphere.
Matter is conserved during the process of respiration because although carbon is being released into the atmosphere, it is not being created or destroyed. The carbon dioxide that is produced during respiration is simply a rearrangement of the carbon atoms that were already present in the organic molecules consumed by the organisms. Therefore, the total amount of carbon in the cycle remains the same.
Respiration is considered a recycling process in the carbon cycle because the carbon dioxide released during respiration can be taken up by plants during photosynthesis. In photosynthesis, plants use carbon dioxide, along with sunlight and water, to produce glucose and release oxygen. This glucose is then used as a source of energy by the plant or stored as starch. The carbon from the glucose is then incorporated into the plant's tissues.
In summary, arrow F represents the process of respiration in the carbon cycle. Matter is conserved during this process as carbon is rearranged but not created or destroyed. Respiration is a recycling process because the carbon dioxide released can be taken up by plants during photosynthesis, completing the cycle.
If AB+ is donated to AB-, will the blood coagulate(clump)?
If AB+ donates blood to AB- the blood will not clot.
Why would this happen?Because of the A and B antigens.Because of the Rh factor.AB+ blood has the A and B antigens, in addition to having the Rh factor, and for this reason, is identified with the positive symbol (+). AB- blood has the A and B antigens but lacks the Rh factor.
The incompatibility between the antigens in the blood is what can cause clotting. However, as AB+ and AB- blood have the same antigens, AB- blood can receive AB+ blood without clotting. The Rh factor in this case does not interfere with the transfusion.
Learn more about blood types:
https://brainly.com/question/256625?
#SPJ1
According to the picture, what organisms do wolves eat? Select all that
apply
foxes
prairie dogs
bison
prairie dogs
prairie grasses
foxes
wolves
prairie grasses
bison
Answer:
Explanation:
for the ansAnswer:
Wolves like to eat elf, deer, rabbits, and mice.
i'm srry if not correct and also yr thing is repeating itself for the Answer choices
Explanation:
Answer:
prairie dogs
bisons
foxes
Explanation:
Hope this helps! =D
8) The logistic growth function f(t)=320/1+7.0e^-.27t
describes the population of a species of butterflies t months
after they are introduced to a non-threatening habitat. How many butterflies were initially introduced to the
habitat?
A population in biology is a collection of organisms belonging to the same species that coexist and interact in the same habitat. A population might consist of plants, animals, or microbes and can range in size from a few to millions of individuals.
We must utilize the logistic growth function to solve for the starting population (P0) of butterflies with t=0 in order to determine the initial population of butterflies.
[tex]f(t) = 320/1 + 7.0e^(^-^0^.^2^7^t^)[/tex]
When t=0,
[tex]f(0) = 320/1 + 7.0e^(^-^0^.^2^7^*^0)\\f(0) = 320/1 + 7.0e^(^0^)\\f(0) = 320/1 + 7.0(1)\\f(0) = 320 + 7.0 f(0) = 327[/tex]
Therefore, 327 butterflies were the initial population transferred to the area.
Learn more about Population, here:
https://brainly.com/question/15872322
#SPJ1
Lipase is a type of enzyme found in the digestive tract of earthworms and is produced by
specialized cells. Lipase is important because it breaks down fats during digestion.
Humans also have specialized cells that produce lipase in their digestive tract. What
would you expect to find in the gene sequences that are responsible for the production of
lipase in both earthworms and humans?
Lipase is a type of enzyme found in the digestive tract of earthworms and is produced by specialized cells to digest fat and oil. The LIPA gene provides the instructions for making an enzyme called lysosomal acid lipase.
Lipase resides in cellular compartments called lysosomes, where it digests and recycles substances the cell no longer needs. Lysosomal acid lipase breaks down fats such as triglycerides and cholesteryl esters. This enzyme is found primarily on the surface of cells that line small blood vessels in muscle and adipose tissue.
Learn more about lipase, here:
https://brainly.com/question/2847647
#SPJ1
20. A protein molecule has a molar absorption coefficient () of 28430 M^-1.cm^-1 at 280 nm wave length. An absorbance value of 0.15 has been measured using a spectrophotometer at the same wave length using a standard 1cm cuvette. Calculate how many nanomoles of protein would there be in 1 ml solution?
There are 5.28 x [tex]10^3[/tex] nanomoles of protein in 1 ml of solution, as found by Beer-Lambert Law.
The Beer-Lambert Law states that the amount of light absorbed by a solution is directly proportional to the concentration of the absorbing species in the solution. The equation for this is:
A = εlc
where A is the absorbance, ε is the molar absorption coefficient, l is the path length (in cm), and c is the concentration (in M).
In this case, we know that ε = 28430 [tex]M^-^1.cm^-^1[/tex], l = 1 cm, and A = 0.15. We can rearrange the equation to solve for c:
c = A/εl
Substituting the values we know, we get:
c = 0.15 / (28430 [tex]M^-^1.cm^-^1[/tex] x 1 cm)
c = 5.28 x [tex]10^-^6[/tex] M
Now we can convert this concentration to nanomoles per milliliter:
1 M = 1000 mM
1 mM = [tex]10^6[/tex] nM
So, 5.28 x [tex]10^-^6[/tex] M
= 5.28 x [tex]10^-^3[/tex] mM
= 5.28 x [tex]10^3[/tex] nM.
To know more about Beer-Lambert Law, refer:
https://brainly.com/question/29434481
#SPJ1
WILL GIVE BRAINLIST, Investigation #2 (9 points): Cells come from existing cells.
Observe the two flasks, and record information about their appearance.
HINT: What do you see with your eyes? If nothing has changed write “no change”
Day
Flask with open (broken) neck
Flask with intact neck
1
2
3
4
5
Day
Flask with open (broken) neck
Flask with intact neck
1
24
5
What is the effect of predation on prey?
Predation will make prey organisms wait longer to reproduce.
Predation makes all of the individuals in the populations being preyed upon less fit.
Predation doesn't have any long term effects on prey organisms
Predation is a strong selective force for prey organisms.
Birds build their nests in trees. Which of the following symbiotic relationships is
most like the one between birds and trees?
A. insects gathering nectar while pollinating flowers
B. moss growing on the sides of tree trunks
C. mosquitoes sucking blood from mammals to warm their eggs
squirrels eating acorns from oak trees
D.
Compare the density of stomata between the two varieties of olive plant, A and B, shown
in Fig
The comparison of stomata density between olive plant varieties A and B reveals that plant A has a higher density of stomata on its lower leaf surface compared to plant B.
Stomata are tiny pores on the surface of leaves that allow for gas exchange and water vapor transpiration. The density of stomata can vary among plant species, and within the same species, it can vary based on environmental conditions.
In the given images of stomata on the lower leaf surfaces of olive plants A and B, it is clear that plant A has a higher density of stomata per unit area than plant B. This suggests that plant A has a higher capacity for water uptake compared to plant B. The higher stomata density of plant A may be an adaptation to a drier environment, allowing it to better cope with water stress.
To learn more about stomata follow the link:
https://brainly.com/question/14351755
#SPJ1
The complete question is:
Water reaches the leaves from the roots through the xylem. Fig. 4.1 shows images of stomata on the lower surfaces of leaves of two varieties of olive plant, A and B. Both are shown at the same magnification.
Compare the density of stomata between the two varieties of olive plant, A and B, shown in Fig. 4.1.
What social and environmental factors affect human population size?
Answer:
Many factors influence the size of a population. Food, water, shelter, predation, and density are all things that can allow a population to grow or cause it to decline.
Hope it helped! :)
What is the BEST way to identify the external phenotype of an animal?
O A electron microscopy
O B. observation
OC. dissection
OD. DNA analysis
The most accurate method for determining an animal's outward phenotype is observation.
What is a phenotypic example?The term "phenotype" refers to the observable physical characteristics of an organism, such as its structure, course of development, and behaviour. The genotype, or collection of genes that make up an organism, as well as environmental factors that affect these genes, are what determine an organism's phenotype. Among the human phenotypes include height, blood type, eye color, freckles, and hair colour. Height, eye color, and blood type are examples of observable qualities, or phenotype, of a person. The genetic makeup of an individual is called their genotype. The two alleles that a person has inherited for a single gene are referred to by this phrase in more detail. A patient's clinical presentation is the observable manifestation of this genotype, or phenotype.To learn more about phenotype, refer to:
https://brainly.com/question/11754095
How many ways does plant excrete
Answer:
It Excretes In Different Ways :-
1:Through Leaves
2:Through Stems
3:Through Roots
4:Through Shedding
Fossil fuels that are used to make plastic bags are collected through either mining or drilling. Mining involves digging or scraping to expose and excavate natural resources. Drilling reaches resources which are deep within the ground and allows those resources to flow to the surface. Both methods result in disruptions to the local habitat and emit large amounts of carbon into the atmosphere. Based on this information, which statement best identifies one advantage and one disadvantage of the "It's in the Bag" program?
A
The program reduces carbon emissions released during mining and drilling. However, animals would be negatively affected by the increased number of plastic bags polluting their habitats.
B
The program eliminates the need for fossil fuels by reusing plastic. However, the environment is negatively affected by habitat destruction since the program harvests composite lumber from natural areas.
C
The program eliminates the need to mine resources since composite lumber is made from recycled bags. However, animals would be negatively affected by the decreased number of trees in their habitats.
D
The program reduces the need for harvesting lumber by replacing wood with composite lumber. However, the environment is negatively affected by habitat destruction since the program uses products made from fossil fuels.
The statement that best identifies one advantage and one disadvantage of the "It's in the Bag" program :
The program eliminates the need to mine resources since composite lumber is made from recycled bags. However, animals would be negatively affected by the decreased number of trees in their habitats.
Therefore option C is correct.
What is a habitat?Habitat can be described as summarizing the array of resources, physical and biotic factors that are present in an area, such as to support the survival and reproduction of a particular species.
The Advantage is that : The program eliminates the need to mine resources since composite lumber is made from recycled bags.
The Disadvantage is that : Animals would be negatively affected by the decreased number of trees in their habitats.
Learn more about habitats at: https://brainly.com/question/728057
#SPJ1
What Is a density independent factor that sometimes helps trees reproduce ?
The density independent factor that sometimes helps trees reproduce are windstorm, or landslide.
What are density independent factor?A density-dependent factor can be described as the factor that its effects can be seen on the size or growth of a population which can be related to the population density.
It should be noted that the Density-dependent factors can be seen to ionvolves the biotic factors, such as the food, parasitism, predation, disease howevr the density-independent factor, can be reagrde as the limiting factor, in ecology, which have effect on the size of a population of living things.
Learn more about density at:
https://brainly.com/question/26364788
#SPJ1
____1. Breaking a reactant into small pieces.
____2. Increasing the temperature.
____3. Putting foods in the fridge.
____4. Diluting solutions.
____5. Adding heat.
Explanation:
Increase 1.Breaking a reactant into small pieces.
Increase 2.Increasing the temperature.
Decrease 3. Putting foods in the fridge.
Decrease 4. Diluting solutions.
Increase 5. Adding heat.
Explanation:
1 increased
2 increased
3 decreased
4 decreased
5 increased
3. Describe In your own words, explain the Law of Universal Gravitation and how it affects Earth's orbit. sc.8.E.5.4, SC.8.E.5.9
A scientific idea known as the Law of Universal Gravitation describes how gravity draws all objects in cosmos together.
What are the three global gravitational laws?The first law states that a force must be applied to an object before it may influence its motion. An object experiences a force equal to its mass times its acceleration, per the second law. According to the third law, when two things contact, they exert forces on one another that are both equal in strength and directed in the opposite direction.
What is the simple definition of Newton's law of universal gravitation?The gravitational force between any two bodies in space is governed by Newton's law of universal gravitation, which states that the force is inversely proportional to the mass of each object and the distance between them.
To know more about Gravitation visit:-
https://brainly.com/question/858421
#SPJ1
one way in which stigma is adapted for reproduction in plants
Answer:
In a flower, this landing zone and entrance is the stigma. It plays a pivotal role in reproduction. Most stigmas are adapted to trap pollen with hairs, flaps and other surfaces to increase their efficiency. Most stigmas are covered with a waxy, sticky substance.
In South America near the Andres Mountains and in Africa near Mt. Kilimanjaro, the climate is cold. Why do you think this is so?
The cold climate near the Andes Mountains in South America and Mt. Kilimanjaro in Africa is primarily due to their high elevations. As air rises over mountain ranges, it cools and loses moisture, resulting in lower temperatures and arid conditions on the leeward side of the mountains.
What is the height of Mt. Kilimanjaro?Mount Kilimanjaro is the highest peak in Africa, rising over 19,000 feet above sea level. The mountain's height and location near the equator result in a unique climate that includes freezing temperatures at the summit despite its proximity to the hot and humid tropics below.
The cold climate near the Andes Mountains and Mount Kilimanjaro is a result of their high elevations and their location on the leeward side of mountain ranges, where air cools and loses moisture as it rises.
Learn about Mt. Kilimanjaro here https://brainly.com/question/23413938
#SPJ1
Beginning with carbon fixation arrange the steps of the calvin cycle in correct order
use of enzyme and ATP to form 5-carbon compound
formation of a stable 3
compound
carbon dioxide reacts with a 5-carbon compound
use of ATP to form a high-energy
3-carbon compound
formation of an unstable 6-carbon
Correct order carbon fixation of the Calvin cycle is:
Carbon dioxide reacts with a 5-carbon compound.Formation of an unstable 6-carbon compound.The unstable 6-carbon compound quickly breaks down into two molecules of a stable 3-carbon compound.Use of ATP to form a high-energy 3-carbon compound.Use of enzyme and ATP to form a 5-carbon compound.The Calvin cycle is the process by which carbon dioxide is fixed into glucose in photosynthetic organisms. The cycle begins with the reaction between carbon dioxide and a 5-carbon compound called ribulose-1,5-bisphosphate (RuBP), which is catalyzed by an enzyme called RuBisCO. The resulting unstable 6-carbon compound quickly breaks down into two molecules of a stable 3-carbon compound called 3-phosphoglycerate (3-PGA).
ATP is then used to convert 3-PGA into a high-energy 3-carbon compound called glyceraldehyde-3-phosphate (G3P), which can be used to produce glucose and other carbohydrates. Some of the G3P is used to regenerate RuBP, so the cycle can continue. This regeneration step requires the use of an enzyme and ATP to form a 5-carbon compound, which can then react with more carbon dioxide to begin the cycle again.
To learn more about Calvin cycle here
https://brainly.com/question/30808721
#SPJ1
Please help i need the answers within 5mins!!!
In the graham cracker model, the amount of water used is the total volume of water that is dripped onto the cracker during the experiment, which can be measured using a graduated cylinder or other measuring device.
What is the Graham cracker model?In the graham cracker model:
The location on the cracker where water will be dripped is the point where the two lines intersect, which is the center of the cracker.
The height of the eyedropper above the cracker is the distance between the tip of the eyedropper and the surface of the cracker, which can be adjusted by the experimenter.
The rate at which the water will be dripped is the speed at which drops of water fall from the eyedropper, which can also be adjusted by the experimenter.
Learn more about Graham cracker model at: https://brainly.com/question/28689239
#SPJ1
Which Kingdom includes organisms that cannot make their own food, eukaryotic, mobile,
and muticellular?
O Fungi
O Animalia
O Protista
O Plantae
Which is an example of a MIXTURE:
salt
or
soil
which biome is Pennsylvania