Which statement best describes how water's properties relate to its functions in a human's biological systems?
O Water absorbs a lot of energy from the skin due to its high specific heat.
O Water enters the body and provides support due to capillary action.
O Water helps decrease the body's density to allow it to float.
O Water dissolves and transports nonpolar covalent compounds in the body.
Answer:
A
Explanation:
on edge
Answer:
The answer is a
Explanation:
There is a very slight change in gravity at the top of a mountain. Which property would most likely be less at the top of a mountain?
mass
weight
body density
body temperature
Answer:
The entity that decreases is the Weight.
Explanation:
Every object on the surface of the earth is usually pulled downwards by the action of gravity. The force or weight is W = mg
Now, the farther one gets away from the surface of the earth by climbing a mountain, the further the person is from the Earth's centre of gravity.
We know that the formula for Force of gravity away from the Earth's surface is given by;
F_g = GM1M2/r²
So the greater the distance, the lesser the gravitational force.
Now, the gravitational force equals the weight of the individual.
Thus, the entity that decreases is the Weight of the individual.
PLEASE HELP ME, I AM DESPERATE
Explanation:
for the first one go to the website mathaway and just put the equation in and you would press graph.
If you have 730 moles of a gas at 304 Kelvin in a 4.50 Liter container what
is the pressure of that eas in atmospheres?
Answer:
4046atm
Explanation:
For this question you can use the ideal gas law,
[tex]PV=nRT[/tex]
Where P is pressure, V is volume, n is moles of substance, R is the constant, and T is the temperature.
Because of the units given, R will equal .08026[tex]P=4046 atm[/tex]
Rearrange the equation to solve for pressure:[tex]P=\frac{nRT}{V}[/tex]
Then, plug in the values (I'll be excluding units for simplicity, but they all cancel out for pressure in atm):
[tex]P=\frac{(730)(.08206)(304)}{4.5}[/tex]
This will give you:
[tex]P=4046atm[/tex]
If the hydrogen ion concentration of a solution is 10M, is the solution acidic, alkaline, or neutral? Group of answer choices alkaline neutral acidic The answer cannot be determined.
Answer:
1) If the hydrogen ion concentration of a solution is 10–10M, is the solution is definitely alkaline. The thing I used to determine that fact is basic point - pH above 7 is always alkaine, and as a proof we can see from the task that the concentration of hydroxyl OH- is pretty higher than hydrogen H+, which is a direct charachteristic of alkain solution.
Explanation:Here is a tip for you, I bet it will be useful :
>7 = basic
<7 = acidic
7 = neutral
what is molarity of 3 mole of hydrochloric acid in 3L of water
Answer:
1
Explanation:
Molarity is simply defined as the mole of solute per unit litre of water. Mathematically, it can be expressed as:
[tex]Molarity = \frac{mole}{volume}[/tex]
With the above information in mind, we can obtain the molarity of the hydrochloric acid solution as follow:
Mole of HCl = 3 moles
Volume of water = 3 L
Molarity =?[tex]Molarity = \frac{mole}{volume}\\Molarity = \frac{3}{3}\\Molarity = 1 M[/tex]
Therefore, the molarity of the hydrochloric acid solution is 1 M.
Learn more: https://brainly.com/question/15012982
How many moon phases will we view in one week?
1
2
3
4
Answer:
4
Explanation:
What is the formula for cr2+ no2-
Answer:
Cr (NO2) 2
Explanation:
................
How many atoms are in 17 moles of O?
Answer:
67
Explanation:
In a polar bond, ____
are not shared equally between atoms.
Explanation:
Polar Covalent Bonds. A polar
covalent bond exists when
atoms with different
electronegativities share
electrons in a covalent bond.
Consider the hydrogen chloride
(HCI) molecule. Each atom in
HCI requires one more electron
to form an inert gas electron
configuration.
In 2006, scientists decided that Pluto
had more in common with
than the original 8 planets of the solar
system.
A: the other, newly discovered, dwarf planets
b: the moon
c: the asteroids
Scientists decided that Pluto are more in common with than the original 8 planets of the solar system will be the other, newly discovered, dwarf planets. Option A is correct.
In 2006, scientists redefined the definition of a planet, leading to the reclassification of Pluto as a dwarf planet. This decision was influenced by the discovery of other celestial bodies in the outer regions of the solar system that shared similar characteristics with Pluto.
The other, newly discovered, dwarf planets" is correct. Scientists recognized that there were other objects in the solar system, such as Eris, Haumea, Makemake, and Ceres, that shared similar characteristics with Pluto and were classified as dwarf planets alongside Pluto.
This reclassification highlighted the presence of a population of objects in the outer regions of the solar system known as the Kuiper Belt, which consists of numerous icy bodies similar to Pluto. By considering the properties and characteristics of these newly discovered dwarf planets, scientists concluded that Pluto had more in common with these objects than with the original eight planets of the solar system.
The moon and the asteroids are not accurate. While the moon and asteroids are significant celestial objects in the solar system, they do not represent the specific group of objects that are considered dwarf planets and have characteristics similar to Pluto.
Hence, A. is the correct option.
To know more about planets here
https://brainly.com/question/26756957
#SPJ2
WILL GIVE BRAINLIEST!!!!!!!!!!!!
Consider the diagram below.
What best describes this diagram?
A) building blocks for creating fats
B) building blocks for creating proteins
C) building blocks for creating fatty acids
D) building blocks for creating carbohydrates
Answer:
B
Explanation:
building blocks for creating proteins
Mariah wants to determine how much energy is needed to change 500 g of liquid water at 100°C to steam at 100°C. What information will BEST help her make this
calculation?
How many grams are there in 2.5 moles of C2H5OH?
2.5 moles of C2H5OH would be 115.175 grams of the same compound.
Recall that:
Mole = mass/molar massHence,
mass = mole x molar massMolar mass of C2H5OH = 46.07
Mass of 2.5 moles of C2H5OH = 2.5 x 46.07
= 115.175 grams
More on moles and mass can be found here: https://brainly.com/question/2076834?referrer=searchResults
Enrichment of nuclear fuel 2 points A. increases the relative concentration of uranium-235 to 3-20% to produce energy in a power plant. B. increases the relative concentration of uranium-235 to 30-50% to avoid a nuclear explosion at higher percentages. C. increases the relative concentration of uranium-235 from 60% to 90% to achieve maximum electricity generation D. decreases the relative concentration of uranium-235 from 100% to 30-50% to avoid a nuclear explosion at higher percentages.
Answer:
B. increases the relative concentration of uranium-235 to 30-50% to avoid a nuclear explosion at higher percentages.
Explanation:
Uranium enrichment may be defined as a process which is necessary for creating effective nuclear fuel from the mined uranium by mainly increasing the percentage of the uranium-235 that undergoes fission with a thermal neutrons.
The enrichment process removes the unwanted uranium-238, thus making uranium 235 concentration higher. It takes up much work to increase the relative concentration of the uranium 235 to make it 30% to 50% so as to avoid a nuclear explosion at such higher percentages.
On a phase change diagram, such as a heating or cooling curve, the horizontal line
indicates a time when the temperature of the substance is staying the same.
True or false
help asap i don’t understand at all lol
Answer:
a, to reduce air bubbles
Explanation:
all its asking, is what is the purpose of the cover. and a is the most reasonable out of all of them, even though none of them make any sense.
Which source helped the newly formed earth become a sphere in shape?
Answer:
rotation around its north-south axis.
What is the maximum number of valence electrons an element can have?
O A. 6
B. 18
O C. 8
O D. 10
Please help
what is the molar mass of.
3 moles of iodine, 5 moles of gold, and 2.5 moles of potassium
Answer:
choices?
Explanation:
Calculate the molarity of a sugar solution if 4 liters of the solution contains 12 moles of sugar.
Answer:
3M
Explanation:
Molarity is one of the measures of the molar concentration of a solution, which can be calculated by using the formula below:
Molarity = number of moles ÷ volume
From the information given in this question, 4 liters of a solution contains 12 moles of sugar. This means that n = 12mol and V = 4L
Molarity = n/V
Molarity = 12/4
Molarity = 3
Hence, the molarity of the sugar solution is 3mol/L or 3M
If I have an unknown quantity of gas held at a temperature of 1195 K in a container with a volume of 25 liters and a pressure of 1,000 atm, how many moles of gas do I have?
Indicate which aqueous solution has the highest boiling point elevation. (Kb for water = 0.512 °C/m)
Answer:
carbon tetrachloride
Explanation:
Boiling point elevation of a liquid or a compound is defined as the boiling point of a liquid that is that will be higher when some other other compound is added. It means that the solution has a higher boiling point than the solvent. When a non volatile solute is added to the pure solvent like water, it results in the highest boiling point elevation.
Carbon tetrachloride, Kb = 5.03°C/m shows highest boiling point elevation when it is used to make a 0.10 m non - electrolyte solution.
Consider the sugar below. Which term best describes this sugar? disaccharide monosaccharide polysaccharide saccharide
oh wait i wrote whole paragraphs let me fix this
okay so you mean this ?
a term for disaccharides would be double sugar or boise!
monosaccharides are simple sugars soluble in water. any class of sugars like glucose.
polysaccharide is starch, cellulose, or glycogen. with molecules together. a carbohydrate.
saccharide knows as to the term structure of carbohydrates. carbohydrates are plain simple? organic compounds that are aldehyde or ketone functional group. with the general chemical formula of carbohydrates is c (H O)
n. 2. n
To solve this we must be knowing each and every concept related to monosaccharide, polysaccharide and disaccharide. Therefore, monosaccharide is the term which describes the given sugar.
What is sugar?Sugar is the generic term for a variety of sweet-tasting, soluble sugars, many of which are utilized in food. Glucose, galactose, and fructose are examples of simple sugars, often known as monosaccharides.
Disaccharides comprise sugars (carbohydrate compounds) created when two simple sugars, or monosaccharides, combine to create a disaccharide.
Polysaccharides, also known as polycarbohydrates, are among the most common carbohydrates present in foods. They are polymeric long-chain carbohydrates made up of monosaccharide units linked together by glycosidic bonds.
Therefore, monosaccharide is the term which describes the given sugar.
To know more about sugar, here:
https://brainly.com/question/29766825
#SPJ5
Explain the difference between mass and weight and
how they are measured.
MERE
Answer:
The difference between mass and weight is that mass is the amount of matter in a material, while weight is a measure of how the force of gravity acts upon that mass. Mass is the measure of the amount of matter in a body. Mass is denoted using m or M.
Explanation:
the different between mass and weight is that the weight is the measure of the force of gravity on an object and the mass of an object will never change ,but the weight of an iteam can change based on its location
explain why the boiling tube was slanted of the hydrated copper II sulfate
How much stock solution is needed to make 250 mL of a 6.0 M solution. The stock solution has a molarity of 18 M.
Answer:
83 mL
Explanation:
Use the dilution equation M1V1 = M2V2
M1 = 18 M
V1 = ?
M2 = 6.0 M
M2 = 250 mL
Solve for V1 --> V1 = M2V2/M1
V1 = (6.0 M)(250 mL) / (18 M) = 83 mL
Can someone balance this equation
CH₄ + 2O₂ = CO₂ + 2H₂O
HEEEEELPPPPP PLZZZZZZ How many liters of water would you need to add to 4.36 moles of NaCl to create a 1.3 M solution?
Answer:
4.67 moles of Li2SO3 dissolved to make 2.04 liters of solution. 4.67 mol ... water. In the second solution, I use 1.0 mole of salt to make a 1.0 L solution. Do the two ... How many milliliters are needed to make. 100.0 mL of ... 4. If I add 25 mL of water to 125 mL of a 0.15 M Naoh solution, what will the molarity of the diluted ...
Explanation:
How do doctors know that Lyme disease is caused by a bacterium and NOT a virus?
Answer: Doctors can diagnose the disease through physical findings such as a "bull's-eye" rash along with a history of symptoms. But not everyone has the rash, and not everyone can recall being bitten. Special blood tests can be taken three to four weeks after suspected contact to confirm the diagnosis.
Explanation: HOPE THIS HELPS HAVE A GOOD DAY!;)