Answer:
Wegener used fossil evidence to support his continental drift hypothesis. The fossils of these organisms are found on lands that are now far apart.
Explanation:
Grooves and rock deposits left by ancient glaciers are found today on different continents very close to the equator.
. Balance the equations and identify the type of reaction. (48 points total: 6 points per question=2
points per reaction type and 4 points for the coefficients)
a. ___Na3N → ___Na + ___N2 Reaction Type:
b. ___H3PO4 + ___KOH → ___K3PO4 + ___H2O Reaction Type:
c. ___N2 + ___H2 → ___NH3 Reaction Type:
d. ___H2O2 → ___ O2 + ___ H2O Reaction Type:
e. ___Zn+ ___HCl → ___ZnCl2 + ___ H2 Reaction Type:
f. ___C2H6 + ___O2 → ___ CO2 + ___H2O Reaction Type:
g. ___CuCl2 + ___ H2S → ___CuS + ___HCl Reaction Type:
h. ___N2 + ___ O2 → ___ N2O5 Reaction Type:
The balanced equation of the reaction and the reaction types are given below as follows:
a. 2 Na₃N → 6 Na + N₂ Reaction Type: decomposition reaction
b. H₃PO₄ + 3 KOH → K₃PO₄ + 3 H₂O Reaction Type: Neutralization reaction
c. N₂ + 3 H₂ → 2 NH₃ Reaction Type: Synthesis
d. 2 H₂O₂ → O₂ + 2 H₂O Reaction Type: Decomposition
e. Zn+ 2 HCl → ZnCl₂ + H₂ Reaction Type: single displacement
f. 2 C₂H₆ + 7 O₂ → 4 CO₂ + 6 H₂O Reaction Type: Combustion
g. CuCl₂ + H₂S → CuS + 2 HCl Reaction Type: Double displacement
h. 2 N₂ + 5 O2 → 2 N₂O₅ Reaction Type: Synthesis
What are chemical reactions?Chemical reactions are reactions that result in the formation of new substances as a result of chemical changes that occur in the substances undergoing the reaction.
In a chemical reaction, the substances that undergo chemical changes are called reactants while the new substances that are formed are called products.
A balanced equation of a chemical reaction is one in which the moles of atoms of reactants are equal to the moles of atoms of the products involved in the reaction.
Learn more about chemical reactions at: https://brainly.com/question/16416932
#SPJ1
quantum mechanics, although mathematically complex, does far better in describing polyelectron systems than the bohr equation. how many total quantum numbers are required to describe the behavior of an electron in any system? a. 1 b. 2 c. 3 d. 4 e. 5
Quantum mechanics, although mathematically complex is 4
What is quantum number ?
A total of four quantum numbers are used to fully describe the motion and trajectory of each electron in an atom. The combination of quantum numbers of electrons is described by a wavefunction corresponding to the Schrödinger equation. Each electron has a unique set of quantum numbers. According to Pauli exclusion principle, no two electrons share the same combination of he four quantum numbers. Quantum numbers are important because they can be used to determine the electron configuration of atoms and the putative positions of atomic electrons. Quantum numbers are also used to understand other properties of atoms such as: B. Ionization energy and atomic radius. Atoms have four quantum numbers.
Principal (n), orbital angular momentum (l), magnetic (ml), electron spin (ms).
To know more about quantum number , click on the given link ;
https://brainly.com/question/2292596
#SPJ4
Calculate the enthalpy of solution per mole NaOH (s) to form a 1.0 M NaOH solution. The mass of the solution is about 52 g (H2O + NaOH). The specific heat of the NaOH solution is about 3.90 J g-1 °C-1. Show all of your work.
The enthalpy of solution per mole NaOH (s) is 0.075 J.
Enthalpy, belonging to a thermodynamic gadget, is the sum of the machine's inner strength and the made of its stress and volume. it's far a state function used in many measurements in chemical, organic, and bodily systems at a steady pressure, which is without problems furnished by way of the massive ambient environment.
Calculation:-
H = mΔHf
ΔHf = H/m
= 3.90/52
= 0.075
Enthalpy is the quantity of inner electricity contained in a compound while entropy is the amount of intrinsic disorder inside the compound. Enthalpy is zero for elemental compounds consisting of hydrogen gas and oxygen gas; consequently, enthalpy is nonzero for water (no matter segment.
In thermochemistry, the enthalpy of solution is the enthalpy exchange related to the dissolution of a substance in a solvent at regular strain resulting in limitless dilution. The enthalpy of the answer is most usually expressed in kJ/mol at a steady temperature.
Learn more about enthalpy here:-https://brainly.com/question/14291557
#SPJ9
based on their positions in the periodic table, predict which atom of the following pair will have the smaller first ionization energy:
based on their positions in the periodic table, the smaller first ionization energy is calcium
Ionization energy is also called as ionization potential is the amount of energy required to remove an electron from an isolated atom or molecule and by looking at the periodic table the beryllium and calcium are in the same group with beryllium being 2 period above calcium and therefore the calcium has the smaller first ionization energy and first ionization energy of chlorine is 12.9676 eV
Know more about atom
https://brainly.com/question/14573545
#SPJ4
I need help with my project!!!!!
Unit Essential Question: How can we harness Earth's energy for our community's needs?
Problem:
We need environmentally-friendly forms of energy.
Wind and solar farms take up lots of space/habitats, and
impact the animals around them.
Challenge
There's a new parcel of land that is being developed in the Antelope
Valley and three companies are bidding on the contract. One company will use solar energy to power the
development, one company plans to use wind power, and your company is using geothermal energy to
power it. Many people don't want to see solar and wind farms for aesthetic reasons and for harm to
natural habitats. So, there's been a growing demand for geothermal energy.
You will be developing a parcel of land with a building that harnesses
geothermal energy from the ground below. You will make a plan and
present it to the class. Create a slides presentation.
Project Criteria for Success:
To prepare for your presentation, discuss the components below. In your presentation, please include the
following:
• A description of your building or development - including what type of building you used (i.e.
school, housing, hospital, church, ranch/farm, park, etc...).
A model (i.e. diagram, physical, or simulation) that describes the forms of energy (i.e. kinetic and
potential energy) involved in your building
how energy (i.e. thermal energy) is transferred in your building
A discussion about the benefits and drawbacks of using geothermal energy in the Antelope Valley
as compared to solar and wind as an energy source.
Answer:
Use a school
Explanation:
You could use a building like a school then you could use the lights as thermal energy then you make up an example of potential energy and when is this assignment due?
Write a balanced equation for the following word equation:nitrogen dioxide + water + oxygen arrow nitric acid
Answer:
2H2O+4NO2+O2=4HNO3
Explanation:
LEFT HAND SIDE(L.H.S) RIGHT HAND SIDE(R.H.S)
N=1X10X2 =20 N=1X10X2=20
H=2X5X2 =20 H=1X10X2=20
O=1X5X2+10X2X2+2 X5 O=3X10X2=60
=60
First multiply H2O by 2 to get an even no. of oxygen on L.H.S
make a similar chart at every turn to record the changes in number.
then multiply R.H.S by 2 to equate the hydrogen
multiply N by 2 on LHS to equate them.
the no of O changes
Multiply RHS by 2 again,
equate the LHS by multiplying NO2 by 2 again, i.e total 4
you now have the answer
The density of WATER is 1gmL. Is the unlabeled clear liquid WATER? Why or why not?
examine the p-block elements of the 2nd period (b through ne). which subshell is being filled while moving across these elements? what is the maximum number of electrons this subshell can hold?
It covers 6 elements, from boron to neon. Boron is in group 13, carbon in group 14, nitrogen in group 15, oxygen in group 16, fluorine in group 17 and neon in group 18. Subshell is being filled while moving across these elements is p subshell with maximum number of electrons this subshell can hold to 6 electrons
Different subshells hold a different maximum number of electrons. Any s subshell can hold up to 2 electrons; p subshell up to 6 electrons; d subshell up to 10; and f subshell up to 14.
The atomic number of boron is 5. Here is the electronic configuration:
B₅ = 1s² 2s² 2p¹
The atomic number of carbon is 6. Here is the electronic configuration:
C₆ = 1s² 2s² 2p²
The atomic number of nitrogen is 7. Here is the electronic configuration:
N₇ = 1s² 2s² 2p³
The atomic number of oxygen is 8. Here is the electronic configuration:
O₈ = 1s² 2s² 2p⁴
The atomic number of fluorine is 9. Here is the electronic configuration:
F₉ = 1s² 2s² 2p⁵
The atomic number of neon is 10. Here is the electronic configuration:
Ne₁₀ = 1s² 2s² 2p⁶
It can be seen that each electron configuration is embedded with a 2p subshell with maximum number of electrons this subshell can hold to 6 electrons.
learn more about subshell here:
https://brainly.com/question/27960485
#SPJ4
the decomposition of hi(g)hi(g) at 298k298k is represented by the equilibrium equation above. when 100.torr100.torr of hi(g)hi(g) is added to a previously evacuated, rigid container and allowed to reach equilibrium, the partial pressure of i2(g)i2(g) is approximately 3.7torr3.7torr. if the initial pressure of hi(g)hi(g) is increased to 200.torr 200.torr and the process is repeated at the same temperature, which of the following correctly predicts the equilibrium partial pressure of i2(g)i2(g), and why?
PI2 ≈ 7.4 torrPI2 ≈ 7.4 torrs because it is directly proportional to the initial pressure of HIHI.
At equilibrium, the forward and reverse reactions occur at the same rate. Once equilibrium is reached, the amounts of each reactant and product remain constant. The equilibrium constant equation is a mathematical relationship that describes how the concentrations of products vary with the concentrations of reactants.
The state of a system whose properties are fixed under unvarying external conditions is called the equilibrium state. Chemical equilibria are dynamic in nature because reactants turn into products and products turn into reactants even after equilibrium is reached. However, the speed of forward and backward reactions is the same. Examples of balance include A book placed on the table. A car that moves at a constant speed. A chemical reaction in which the forward and reverse reaction rates are equal.
Learn more about The equilibrium here:-https://brainly.com/question/517289
#SPJ4
Subatomic particles can usually pass undeflected through an atom because the volume of an atom is composed of.
Subatomic particles can usually pass undeflected through an atom because the volume of an atom is composed of mostly space.
What are subatomic particles?The positively charged nucleus of an atom is surrounded by a cloud of negatively charged electrons. The electrons are in constant motion, moving around the nucleus in a random pattern. The size of an atom is determined by the size of this electron cloud. Most of the volume of an atom is actually empty space.
Subatomic particles are usually able to pass through an atom undeflected because they are so much smaller than the atom itself. The nucleus of an atom is only a tiny fraction of the size of the atom, and the electrons are even smaller. Subatomic particles can easily pass through the spaces between the nucleus and the electrons.
Learn more about Subatomic particles:
https://brainly.com/question/2166462
#SPJ4
Create an energy transformation for a whistling tea kettle on a stove. EX: THERMAL TO ELECTRICAL
Answer: thermal from electrical you would need something to take the heat to electrical energy.
Explanation: it creating heat not electricity
Clo3− draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons. Show the formal charges of all nonhydrogen atoms.
The formal charges of all nonhydrogen atoms are -1.
Solution:-
O 7-4 = 3 O Double bond on one H 5-4 = 1
O-Cl-O 6-7 = -1x4 = -4 N 5-4=1 H-N-H 1-1=0
O 3-4= -1 O O 6-7 = -1(2)=-2 H 1-0=+1
6-6 = 0 1-2 = -1
It will percentage its last valence electron thru a single bond to the terminal oxygen atom. This is in agreement with carbon and hydrogen atoms that each need to form 4 and 1 covalent bonds respectively. because the terminal oxygen atom best has a single covalent bond, it'll have a proper rate of -1.
According to the lewis structure of SO2, The critical atom is sulfur and it is bonded with 2 oxygen atoms thru a double bond. each oxygen atom acquires 2 lone pairs of electrons and the primary sulfur atom has 1 lone pair of electrons.
Learn more about Nonhydrogen atoms here:-https://brainly.com/question/2822744
#SPJ4
What dose Eph stand for
The following properties are either physical or chemical. Which one is different from the rest based on those two categories? density flammability heat of combustion reactivity.
Density is different from the rest based on those two categories. density is a physical property.
Physical properties can be observed or measured without changing the composition of matter. Physical properties are used to observe and describe matter. Two types of it intensive and extensive properties. This classification relates to the dependency of the properties upon the size or extent of the system or object in question.
An intensive property is a bulk property, meaning that it is a physical property of a system that does not depend on the system size or the amount of material in the system. Examples of intensive properties include temperature, refractive index, density, and hardness of an object.
Chemical properties of matter describes its "potential" to undergo some chemical change or reaction by virtue of its composition. What elements, electrons, and bonding are present to give the potential for chemical change. For example : Metals in general have they chemical property of reacting with an acid.
Flammability - The susceptibility to combustion is a chemical property and the susceptibility to combustion is unknown. Fire tests are performed to determine how difficult or easy it is to burn a particular material.
Heat of Combustion - This chemistry is the amount of energy released as heat when a substance burns with oxygen.
To learn more about Chemical and physical properties, refer:
https://brainly.com/question/17436856
#SPJ4
.
ayou are trying to determine the age of a lava flow using an isotope with a half-life of 1.5 million years. if the sample has gone through four half-lives, what is the age of the rock?
The age of the rock is 6 million years.
What is a half-life of an isotope?
A radionuclide's half-life is the amount of time it takes for half of its radioactive atoms to decay.
Do all isotopes have a half-life?
All isotopes have a half-life if proton decay is real, but those that are stable in a universe without proton decay will simply live a lot longer than the others.
Why are isotopes measured in half-lives?
Due to an isotope sample's exponential rate of decay over time, the half-life is used as a practical measurement. In a fixed amount of time, each atom is given the same chance of decaying, which causes exponential decay.
Age=4 half lives * 1.4MY/half life
Age=6 million years.
Thus, the age of the rock is 6 million years.
To know more about the half-life of an isotope:
https://brainly.com/question/19337635
#SPJ4
If 250 ml of methane, ch4, effuses through a small hole in 28 s, the time required for the same volume of helium to pass through the hole under the same conditions will be.
Answer: 10s
Explanation:
Ideal gas law is valid only for ideal gas not for vanderwaal gas. To solve such, we need to know the relation between rate of effusion and molar mass of gases. Therefore, the same volume of helium to pass through the hole under the same conditions will be same.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature.
Mathematically the relation between rate of effusion of gases and their molar masses can be given as:
rate of effusion of unknown gas/rate of effusion of methane gas=√molar mass of methane/molar mass of particular gas
The same volume of helium to pass through the hole under the same conditions will be same according to grahams law of diffusion.
Therefore, the same volume of helium to pass through the hole under the same conditions will be same.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ2
how many atoms in bcc
In a bcc unit cell, there is one atom in the body's center and eight others in each of the cell's eight corners. The unit cell is entirely made up of the atom at the center of the body. Each corner atom contributes one eight to the unit cell. Therefore, 818+1=2 atoms make up the entire number of atoms in the unit cell.
the body-centered cubic is named after the central atom. However, there are eight corners, each of which has a shared atom with seven unit cells nearby. As a result, each corner of the unit cell contains 1/8 of an atom, which adds up to 1 whole atom.
A unit cell is the smallest repeating arrangement of atoms found in a crystal. The body-centered cubic (BCC) unit cell, a third typical metal packing arrangement, includes one atom in the cube's core in addition to atoms at each of its eight corners. The corner atoms in each unit cell will be divided among eight unit cells because each corner atom is the corner of another cube. The central atom and the eight eighths from the corners make up the BCC unit cell's total of two atoms.
To know more about body-centered cubic, click on the link below:
https://brainly.com/question/14671480
#SPJ4
(a) indicate which orbitals in the following list fill before the 4p orbitals. 3d 4s 4d 5s (b) what is the maximum number of electrons in the 4s subshell? (c) an electron in an orbital has the following quantum numbers: n
a. In the following list 4s orbital can be filled before 4p orbital.
b. The maximum number of electrons in 4s subshell is 2.
c. An electron in an orbital has 4 quantum numbers n, l, ml, ms.
According to the Aufbau principle, electrons first occupy lower-energy atomic orbitals before moving on to higher-energy ones. Hence 4s orbitals filled before 4p followed by filled d orbitals. similarly the maximum capacity of s subshell to hold electron is 2, while p subshell is 6, 10 for d subshell and 14 for f subshell. Electron in an orbital can be completely described by principle quantum number n which represents the main electronic shell, Azimuthal quantum number l determines an orbital's shape, magnetic quantum number ml defines how many orbits there are and how they are oriented within a subshell and spin quantum number ms describes the spin of electrons.
To learn more about Quantum numbers click here
brainly.com/question/16977590
#SPJ4
Can the element gold kick out magnesium from a compound?
Gold cannot replace Magnesium from a compound as gold is placed lowest in the reactivity series of metals. It won't even react with the compound let alone replace it. Gold has great ductile strength and malleability.
Features of Reactivity Series of Metals
The metals at the top of the reactivity series are powerful reducing agents since they are very easily oxidized. These metals tarnish or corrode very easily though.The reducing ability of the metals grows weaker while traversing down the reactivity series.The electro-positivity of the elements also reduces while moving down the reactivity series of metals. All metals that are found above hydrogen in the activity series liberate H2 gas upon reacting with dilute hydrochloric acid(HCl) or dilute sulphuric acid(H2SO4).Metals than on the reactivity series have the ability to displace metals that are placed lower from their salt solutions such as Mg can replace Au but Au cannot replace Mg as Au is kept lowest in the reactivity seriesHigher ranking metals require greater energy for their isolation from ores and other compounds to stay highly reactive.Therefore Gold cannot replace Magnesium from a compound as it is the least reactive metal and therefore, comes lower than Magnesium in the reactivity series
Learn about reactivity series
https://brainly.com/question/15304384
in the cytoplasm, some of the lactose is converted into , which binds the site of the lac repressor.
The lac operon is a group of genes that make up an mRNA. These genes are those that allow the consumption of lactose through the proteins of the bacteria, as is the case with E. Coli.
The Lake RepressorThe lac operon is made up of three genes, which constitute the mRNA, that is, the factor responsible for promoting the union and decomposition of lactic acid in bacteria, the process occurs as follows:
The lacZ gene codes for lactose and breaks it down into molecules called monosaccharides.The lacY gene favors the transport of lactose within the bacterium.Once the product reaches the positive regulator, transcription is achieved thanks to the binding of the catabolite-activating protein.For more information about lactose here: https://brainly.com/question/1453722
#SPJ4
Uv rays are a type of ""ionizing radiation"" and are energetic enough to damage biological tissue such that they degrade into ions and electrons. What other forms of electromagnetic radiation do you think could be ionizing?.
Other forms of electromagnetic radiation that could cause ionization are X-rays and gamma rays
Ionizing radiation is a form of energy that acts generally by removing electrons from atoms and molecules of materials that include air, water, and living tissue etc. Ionizing radiation can travel unseen and can pass through these materials.
Human activities, such as making medical x- rays, generating electricity from nuclear power plants , testing the nuclear weapons, and producing a wide variety of common products such as smoke detectors which usually contains radioactive materials, can cause additional exposure to ionizing radiation as well.
X-rays and gamma rays have enough energy so that during interaction with atoms, they are capable to remove electrons and cause the atom to become charged or ionized. hence we can call them to be ionizing radiation.
To know more about ionization
https://brainly.com/question/26660482
#SPJ4
Create an energy transformation for playing the piano. EX: Thermal to Electrical
A piano contains both mechanical and acoustic energy. Mechanical energy is created when you press a key; as a result, the strings vibrate when the hammer strikes them, producing sound.
What converts thermal energy to electrical energy?
Using a thermoelectric generator, thermal energy can be transformed into electrical energy.
What is thermal energy?
The term "thermal energy" is used a lot of different ways in physics and engineering. It may be related to a number of different physical concepts.
What is electric energy?
Electrical energy is related to forces on electrically charged particles and the motion of electrically charged particles, frequently electrons in wires.
Hence mechanical and acoustic energy is a correct answer.
To know more about thermal energy follow link
https://brainly.com/question/19666326
#SPJ1
Explain how the information from the timuli i communicated to the brain. Pleae Hurry Do not know how to give brainliet but if I figure it out I will try if I have ome. And pleae make ure the anwer i right, Thankyou
We know; Neurons communicate using both electrical and chemical signals.
What is neuron?
The basic building blocks of the brain as well as nervous system are neurons. They are the cells that receive sensory information from the outside world, send motor commands to our muscles, as well as transform and relay electrical signals at each stage along the way. Beyond that, our interactions with them shape who we are as people. However, our approximately 100 billion neurons can interact closely with other cell types that are generally referred to as glia. Neurogenesis, which can occur in adults, is the process of the brain producing new neurons. Consider a neuron as a tree for an effective analogy. Dendrites, axons, and the cell body, or soma, are the three main components of a neuron.
To learn more about neuron from the given link
https://brainly.com/question/13061744
#SPJ4
Compound X has a relative molecular mass of 88
Deduce the molecular formula of compound X.
Answer:
Explanation:
Butanoic acid С₄Н₈0₂
M = 4·12 + 8·1 + 2·16 = 88
The empirical formula represents the simplest whole number ratio. The molecular formula of the compound X with a relative molecular mass of 88 is Butanoic acid and the molecular formula is C₄H₈O₂.
What is molecular formula?The formula in which the actual number of all the atoms of various elements present in one molecule of the compound is represented is known as the molecular formula.
The molecular formula of a compound is a whole number multiple of its empirical formula.
Molecular formula = n × Empirical formula
Here butanoic acid has the molar mass 88.11 g/ mol and its molecular formula is C₄H₈O₂. It is a straight chain alkyl carboxylic acid and it is an oily colourless liquid. It is also used as a food flavoring agent and a safe food additive.
Thus the compound X is Butanoic acid or Butyric acid.
To know more about empirical formula, visit;
https://brainly.com/question/14044066
#SPJ2
80 g of sodium hydroxide reacts with excess sulfuric acid to produce 142 g of sodium sulfate. What mass of sodium hydroxide would be needed in order to make 50 g of sodium sulfate?.
28.16 grams of Sodium hydroxide would be required to make 50 grams of sodium sulfate.
The gram is a unit of mass in the International System of Units (SI) which is equal to one thousandth of a kilogram. Gram is something that is related to the mass as well.
Mass is actually the measure of the amount of matter in a substance or any object. The basic SI unit for mass is the kilogram (kg), but usually the smaller masses may be measured in grams (g). To measure mass, you would use a balance or even a scale.
In the above question it is said that 80 grams of Sodium hydroxide reacts with sulfuric acid to produce 142 grams of sodium sulfate. So then to produce 50 grams of sodium sulfate, the amount of Sodium hydroxide will be;
⇒ 80 × 50 = 28.16 grams
142
To know more about grams
https://brainly.com/question/11260752
#SPJ4
Which of these "curved arrows" describe a mechanism for the formation of a carbocation that has roughly the same stability as this one? HHH - H- C- C 70-I CH H H-C-H Н AA only [B] B only [C] C only [D] B and C only [E] A and C only Explanation for your choice (4 pts)
The correct answer is B and C only.
Nonlinear arrows with barbs on one-stop are used to signify electron waft. A double-barbed arrow suggests the motion of an electron pair, while an unmarried-barbed arrow indicates the movement of an unmarried electron. A full head on the arrow indicates the movement or shift of an electron pair A partial head at the arrow indicates the shift of an unmarried electron.
The factor of the curved double-headed arrow is to expose the movement of an electron pair. They start on the tail and end up at the pinnacle. Arrows are universally acknowledged for indicating guidelines. they may be broadly used on signage and for wayfinding, and are frequently used in avenue surface markings. Upward arrows are frequently used to indicate a growth in a numerical fee and downward arrows suggest a decrease.
Learn more about Curved arrows here:-https://brainly.com/question/24080876
#SPJ4
If you forgot to add the primers to your pcr reaction, what would happen and why?.
Your experiment would not work because Taq polymerase needs a tiny bit of DNA to add bases to. Due to the lack of an enzyme that could add new nucleotide bases, your process would not succeed.
What would happen if the primers for your PCR reaction were left out?The primers are absolutely necessary for a PCR reaction to work. The RNA primers must anneal before the heat-resistant DNA polymerases may start replicating DNA. The DNA polymerase cannot work without the primers, and as a result, no product will be produced.
DNA polymerase requires a primer on which it may add the first nucleotide since it can only add a nucleotide onto an already-existing 3'-OH group. This prerequisite allows the researcher to identify a particular area of the template sequence that they want to amplify.
To learn more about PCR reaction refer to
https://brainly.com/question/17555761
#SPJ4
Identify What season is the Northern
Hemisphere experiencing in the image above?
Season is the northern hemisphere experiencing in the image above is winter
Northern hemisphere is the half of the earth that lies north of the equator and earth tilted axis causes the season and throughout the year different part of the earth receive the sun most direct rays and so when the north pole tilt toward the sun and when its south pole tilt toward the sun its winter in the northern hemisphere and our northern winter is in dec, Jan and Feb
Know more about season
https://brainly.com/question/13661560
#SPJ1
The sarcoplasmic reticulum calcium transport ATPase (SERCA) D351A mutant has the P domain Asp 351 residue replaced by alanine. How would this affect the Ca2 ATPase?
SERCA D351A cannot be phosphorylated by it.
What happens if you have low calcium levels?Calcium deficiency can affect every part of the body, resulting in thin, brittle skin, sluggish hair growth, and brittle nails. Calcium has a critical role in both the neurotransmitter release and indeed the contraction of muscles. As a result, persons who are calcium deficient and otherwise healthy may experience seizures.
What happen if you consume too much calcium?Too much blood calcium can harm your bones, develop kidney stones, and have an impact on how well your heart and brain work. Usually, parathyroid glands that are overactive lead to hypercalcemia. These four tiny glands are situated near the thyroid in the neck.
To know more about Calcium visit:
https://brainly.com/question/9584549
#SPJ4
select the single best answer. identify the relationship in the following pair. do the drawings represent constitutional isomers or stereoisomers, or are they just different ways of drawing the same compound? if they are stereoisomers, are they enantiomers or diastereomers? h571915x and h571915b
They are just different ways of drawing the same compound, the following pair are diastereomers.
The given pair of compounds are not constitutional isomers, because constitutional isomers have the same molecular formula but different bond connectivity. But the given pair have the same bond connectivity.
The given pair of compounds are stereoisomers because they have the same molecular formula but the 3D space arrangement is different. And finally, the given compounds are not mirroring images of each other so we call them diastereomers, not enantiomers. As enantiomers are superimposable mirror images of each other. The structures of the given pair of compounds are attached as a picture.
You can also learn about diastereomers from the following question:
https://brainly.com/question/21506956
#SPJ4