How am i supposed to know if i should use sin/cos/tan when i have 2 unknowns? ​

How Am I Supposed To Know If I Should Use Sin/cos/tan When I Have 2 Unknowns?

Answers

Answer 1

Answer:

a=6.71cm and b= 9.948cm

Explanation:

[tex]\frac{a}{h} = sin(\alpha )\\a=hsin(\alpha )\\\\\\\frac{b}{h} =cos(\alpha )\\b=hcos(\alpha )\\[/tex]

which alpha is 34°


Related Questions

Why is the magnetic force considered to be an action-at-a-distance force?
a
Magnets must be far apart in order to exert a force.
b
Magnets do not have to touch each other to experience a force.
c
Magnets push each other apart to increase the distance between them.
d
Magnets must be large in size in order to exert a force that is strong enough to notice.

Answers

ANSWER:

C.

________________

CAN YOU BRAINLEST ME

**WRITE SHORT ANSWER**


WRITE ONE ADVANTAGE AND ONE DISADVANTAGE OF ALCOHOL AS A LIQUID USED IN THERMOMETERS

Ans =

DIFFERENCE IN FORCES BETWEEN SOLID AND GAS PARTICLES

Ans =

TWO FACTORS TO INCREASE RATE OF EVAPORATION IN LIQUID
Ans =

Answers

Answer:

WRITE ONE ADVANTAGE AND ONE DISADVANTAGE OF ALCOHOL AS A LIQUID USED IN THERMOMETERS

Advantage: Alcohol has a high expansivity.

Disadvantage: Alcohol is not opaque, this may give wrong temperature readings.

DIFFERENCE IN FORCES BETWEEN SOLID AND GAS PARTICLES :

Answer: Solids have stronger intetmolecular forces of attraction than gases.

TWO FACTORS TO INCREASE RATE OF EVAPORATION IN LIQUID :

Answer: Decreasing the volume of the container containing the liquid. This will increase vapour pressure as well the rate of evaporation .

[tex].[/tex]

WRITE ONE ADVANTAGE AND ONE DISADVANTAGE OF ALCOHOL AS A LIQUID USED IN THERMOMETERS

Advantage: Alcohol has a high expansivity.

Disadvantage: Alcohol is not opaque, this may give wrong temperature readings.

DIFFERENCE IN FORCES BETWEEN SOLID AND GAS PARTICLES :

Answer: Solids have stronger intetmolecular forces of attraction than gases.

TWO FACTORS TO INCREASE RATE OF EVAPORATION IN LIQUID :

Answer: Decreasing the volume of the container containing the liquid. This will increase vapour pressure as well the rate of evaporation .

a car travels east with a velocity of 80 km/h for 90 minutes how far did the car travel (show your work)

Answers

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

Given terms :

velocity (v) = 80 km/h

time (t) = 90 minutes = 1.5 hour

As we know, Distance covered is equal to :

[tex]velocity \times time[/tex]

[tex]80 \times 1.5[/tex]

[tex]120 \: \: km[/tex]

Identifying What are five things
that must be true in order for
a substance to be considered a
mineral?

Answers

Answer:

1. Naturally occuring

2. Solid

3. Inorganic

4. Crystalline

5. Specific Chemical Compostion

Explanation:

Minerals are inorganic, crystalline solids that occur during biogeochemical processes in nature like in cooled lava or evaporated sea water. Minerals are not rocks, but are actually the components that make up rocks. Though they vary in color and shape, each mineral has a distinct chemical composition.

1. Minerals are formed by natural geological processes. Most minerals form from molten lava, sea evaporation or hot liquids in caves or cracks. Laboratory-generated minerals like synthetic gems made for commercial purposes are not considered actual minerals.

2. Though minerals vary in shape, color, luster (the way a mineral reflects light) and hardness, all minerals are a solid at a given temperature. If a substance is not in its solid state, it is not currently a mineral. For example, ice is a mineral, but liquid water is not. The Mohr scale, rates a minerals hardness from one to 10, 10 being the hardest. Diamond is the hardest mineral. Talc is a very soft mineral with a Mohr rating of one.

3. Minerals are wholly inanimate, inorganic compounds. But there are exceptions to this qualifier. There are rare organic substances with definitive chemical compositions that are labeled as “organic minerals." The most famous of this oxymoronic exception is whewellite. Whewellite is a component of kidney stones and coal deposits.

4. Most minerals will grow into a crystal shape, space permitting. Mineral deposits are often small because there is usually a variety of minerals in the same vicinity competing for the same room to grow. A mineral’s crystalline structure determines its hardness, cleavage (how it breaks) and color. There are six different crystal shapes: cubic, tetragonal, orthohombic, hexagonal, monoclinic and triclinic.

5. A mineral is defined by its chemical composition. A rock, on the other hand, does not have a specific chemical composition because it is a composite of a variety of minerals. Minerals are classified based on their anionic group. The major mineral groups are native elements, sulfides, sulfosalts, oxides and hydroxides, halides, carbonates, nitrates, borates, sulfates, phosphates and silicates. Silica is abundant in the Earth’s crust, so silicates are the most common group of mineral.

insert two arithmetic means between 13 and 18.5​

Answers

Answer:

Describe the process of boiling

Drag each tile to the correct location.
Based on the following statements, determine whether the relative age or absolute age for the events are known:
• Harrison was born 7 years ago, but his sister Meredith was born long before then.
The tree in Jasmine's yard has been there longer than her house has, and her house was built 85 years ago.
The triceratops went extinct 65 million years ago, long after the stegosaurus went extinct.
Relative Age
Absolute Age
Harrison's
birth
Meredith's
. birth
the planting of
Jasmine's tree
the building of
Jasmine's
the extinction of the
triceratops
the extinction of the
stegosaurus
house

Answers

Answer:

Relative: meredith's birth, the planting of jasmine's tree, and the extinction of the stegosaurus

Absolute: harrison's birth, the building of jasmine house, and the extinction of the triceratops

Explanation: plato

True or false? Electrons can move, but positive charges can't.True or false? Electrons can move, but positive charges can't.

Answers

Answer:

true

Explanatio

Damage to the thalamus would be least likely to affect our

Answers

This can cause sensory problems, but it can also lead to behavioral and cognitive changes.

(hope this helps you) :)

A gyroscope is a wheel or disk that spins rapidly around two or more axes. Question options: True False
the answer is false

Answers

The answer to your question is false

Answer: false

Explanation:

A ball is thrown horizontally with an initial velocity of 5.0 meters per second.
The ball travels 15 meters horizontally before it lands. What vertical height
was it thrown from?

Answers

Hi there!

We can begin by calculating the total time of the ball's projectory:

t = d/v

t = 15/5 = 3 sec

We can use the simplified kinematic equation for time:

t = √2h/g

Rearrange to solve for h:

t² = 2h/g

gt² = 2h

gt²/2 = h

Plug in the values: (g = 9.8 m/s²)

9.8(3)² / 2 = 44.1 m

40 meters divided by 5

Answers

Answer:

8 meters

Explanation:

40/ 5 = 8

NEED HELP!!!! 10 POINTS!!!!

Oxygen helps all aspects of the body function better.
A.
True

B.
False

PLEASE NO LINKS

Answers

Answer: True

Explanation: Oxygen is important to every cell in your body. Without it, your cells can't make energy, and their metabolism is less effective.

Explanation:

true. your red blood cells need energy to process through your blood and body. your lungs need oxygen to breathe. the oxygen travels through your lungs into your blood to the organs and tissues which all help the body function

a 15-kg block is on a frictionless ramp that is inclined at 20° above the horizontal. it is connected by a very light string over an ideal pulley at the top edge of the ramp to a hanging 19-kg block, as shown in the figure. the string pulls on the 15-kg block parallel to the surface of the ramp. find the magnitude of the acceleration of the 19-kg block after the system is gently released?

Answers

Hi there!

Since the string is light and there is no friction in the pulley, the acceleration of the system is equal to the acceleration of both blocks.

We can begin by summing the forces of each block:

Block on incline:

- Force of gravity (in the negative direction away from the acceleration)

- Force of Tension

∑F = -M₁gsinФ + T

Block hanging:

- Force of gravity (Positive, in direction of acceleration)

- Force of Tension (Negative, opposite from acceleration)

∑F = M₂g - T

Sum both of these net forces for each block:

∑Fт = -M₁gsinФ + T - T + M₂g

∑Fт = -M₁gsinФ + M₂g

Divide by the mass to solve for acceleration:

[tex]a = \frac{-M_1gsin\theta+M_2g}{M_1+M_2}[/tex]

Plug in the given values:

[tex]a = \frac{-(15)(9.81)(sin20)+19(9.81)}{15+19} = 4.002 m/s^2[/tex]

The magnitude of the acceleration of the 19-kg block is 4.0 m/[tex]s^{2}[/tex].

The 15-kg block is accelerating down the ramp, and the 19-kg block is accelerating up. The string connecting the two blocks is taut, so it must be applying a force to both blocks. The force of the string on the 15-kg block is equal to the force of the string on the 19-kg block.

Let's call the force of the string on the 15-kg block T. We can use Newton's second law to write two equations for the acceleration of the two blocks:

For the 15-kg block: T - mg sin(θ) = 15a

For the 19-kg block: T = 19a

where:

m is the mass of the block

g is the acceleration due to gravity

θ is the angle of the ramp

a is the acceleration of the block

Plugging the second equation into the first equation, we get:

19a - mg sin(θ) = 15a

Solving for a, we get:

a = (mg sin(θ)) / (4m)

= (15 kg * 9.8  m/[tex]s^{2}[/tex] * sin(20°)) / (4 * 15 kg)

= 4.0 m/[tex]s^{2}[/tex]

Therefore, the magnitude of the acceleration of the 19-kg block is 4.0  m/[tex]s^{2}[/tex].

To know more about acceleration here

https://brainly.com/question/2303856

#SPJ3

Mr lyall was expecting to hear a (1)______ with a (2)_____sound and instead, the student was playing a (3)_______ and a (4)_______.

Choice 1:
lower frequency
higher frequency

Choice 2:
Lower amplitude
higher amplitude

Choice 3:
Lower frequency
higher frequency

Choice 4:
lower amplitude
higher amplitude​

Answers

Answer:

(1)lower frequency

(2)lower amplitude

(3)higher frequency

(4)higher amplitude

Mr. lyall wanter to hear a music (lower frequency and lower amplitude) but, the student was playing a noise (higher frequency and higher amplitude)

Explanation:

brainliest plz

2. Keith took a cube and measured the mass and volume of a
cube. He discovered the mass to be 36g and the volume to be
6 cm3. What is the density of the cube?

Answers

Answer:

6 g/cm³

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\[/tex]

From the question

mass = 36 g

volume = 6 cm³

We have

[tex]density = \frac{36}{6} = 6 \\ [/tex]

We have the final answer as

6 g/cm³

Hope this helps you

For which type(s) of signals does noise alter the original information?

A) analog only

B) digital only

C) both analog and digital

D) neither analog nor digital

Answers

neither analog nor digital

A student wants to use a simple machine to remove a bottle cap.

What is the best simple machine for this task?


a. inclined plane

b. pulley

c. lever

d. screw

Answers

Answer:

inclined plane

is the answer::::::)))

Answer:

d.

Explanation:

screw

An inclined plane wrapped around a cylinder or cone. a conmon use of the screw is to hold objects together, examples include a jar lid and wood screw. A compound machine is s combination of two or more simple machines

.) Explain what an indepent variable is

 Explain what an
dependent variable

Answers

In a science experiment, the dependent variable is the thing that will change based on what else is happening in the experiment. The independent variable is the thing that stays the same every time.

Answer:

An independent variable is a variable that stands alone and isn't changed by the other variables you are trying to measure.

A dependent variable is something that depends on other factors.

For your muscles to get stronger, or your body to get fit, you must work harder when exercising than when you are at rest.

Question 2 options:

Overload


Specificity


Progression


Regularity

Answers

Answer:

Overload

Explanation:

Which of these is an example of weathering?
A
a landslide moving debris down the side of a mountain

B
a large rock cracking into many smaller pieces around a tree root

C
wind blowing sand from one side of a beach to the other

D
glaciers slowly carrying bits of rock along the ground

Answers

Answer: D

Explanation: The weather is making the Bits of rock and the glaciers are moving it so that is weathering.

Imagine that you design running shoes for a living. Which biometric would be most useful?
A.
the average weight of a runner
B.
the number of runners in a popular urban area
C.
the points of impact when the foot hits the ground
D.
the distance that beginning runners attempt to finish

Answers

When designing running shoes, the most useful bio metric is the average weight of a runner.

Usually, running shoes are designed with the particular concerns of the user in mind. A very useful biometric when designing running shoes is the average weight of the runner.

This is important because a heavier runner, for instance, will hit the ground with a greater force leading to greater impact. It is necessary that these runner have shoes that help to cushion this higher impact.

Learn more: https://brainly.com/question/1527403

3. A rescue plane drops a package to a stranded party of explorers. The plane is traveling horizontally at a velocity of
100.0 m/s at a height of 50.0 m above the ground.
a. How long will it take for the package to hit the ground?

Answers

Hi there!

For this part, we can disregard the horizontal velocity because horizontal and vertical motion are INDEPENDENT.

We can used the simplified equation to solve for time:

[tex]t = \sqrt{\frac{2h}{g}}[/tex]

Where:

h = height

g = acceleration due to gravity (assume g = 10 m/s²)

Plug in given values:

[tex]t = \sqrt{\frac{2(50)}{10}} = \sqrt{10}[/tex]

t ≈3.162 sec

What is the number of significant figures in 4.07 × 1016?

Answers

Hello!

4.07x10^16

The number of significant figures is [tex]3[/tex], because all the zeroes are not significant.

Hope this helps!

~Just a joyful teen

[tex]GraceRosalia[/tex]

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The required number is :

[tex]4.14 \times 10 {}^{3} [/tex]

The number of significant figures = 3

Refer to attachment for solution ~

A water bottle contains 15.0 ounces of water. A person drinks 0.5 ounces per minute. How many hours will it take to drink all of the water?

Answers

It would take 30 minutes

You would do 15.0 divided by 0.5

what is a contact time​

Answers

Answer:

Contact time—or “wet time”—is how long a disinfectant needs to stay wet on a surface in order to be effective

Explanation:

Contact times can range from as little as 15 seconds for common hand sanitizer, to as long as 30 minutes for chlorine oxides used in laboratories.

An object initially traveling at 20 Meters per second west accelerates uniformly at 4.0 meters per second squared east for 2.0 seconds The displacement of the object during these 2.0 seconds is

Answers

The displacement of the object during these 2.0seconds is; 32 meters west

According to the question;

Initial velocity, u = 20m/s

Acceleration, a = 4m/s²

Time, t = 2s

Displacement, S = ?

However, since the acceleration of the object is in the opposite direction; the equation of motion that can be used to find the Displacement is;

S = ut - at²/2

By substituting values as given in the question; we have;

S = (20 × 2) - (4 × 2²)/2

S = 40 - 8

S = 32m west

Read more:

https://brainly.com/question/24527971

what activities areaways to overcome barriers to physical fitness

Answers

Answer:

No Time

Schedule activities into your day and use an exercise log so you can see how little time it takes.

Build activities into everyday tasks no matter where you are: Bike to work. Use the stairs. Take walk breaks at work. Garden. ...

Find an activity you enjoy that works for your schedule

Measurements of the height of various plants in an experiment are called

Answers

Answer:

ExplaMeasurements of the height of various plants in an experiment are called (Data).nation:

Add vectors 7.5 m/s and the vector -2.9 m/s

Answers

How To:

How do you add two vectors?  

To add or subtract two vectors, add or subtract the corresponding components. Let →u=⟨u1,u2⟩ and →v=⟨v1,v2⟩ be two vectors. The sum of two or more vectors is called the resultant. The resultant of two vectors can be found using either the parallelogram method or the triangle method .

3 a There is a thin layer of water between the blade and the ice. Suggest how this affects friction .​

Answers

Answer:

The water acts like a lubricant therefore has a smooth motion over the ice.

Other Questions
1) Danielle completely covered a square window using 18.4 ft of contact paper without anyoverlap. Which measurement is closest to the side length of this window in feet?A 5 ftB 4 ftC 9 ftD 3 ft How does Douglass use tone to effectively convey his message in "What the Black Man Wants"?O Douglass uses a passionate tone to strengthen the logical arguments he makes about universal suffrage.O Douglass uses an angry tone to convey the idea that the black man is bitter about the absence of universal suffrage.Douglass uses a sorrowful tone to elicit sympathy and guilt in hopes of achieving universal suffrage.Douglass uses a threatening tone to issue the inflexible demands he has prepared about universal suffrage. Please help me on my homework What happens to the oxygenthat is formed when water moleculesare split during photolysis Sheila walks 3 miles in of an hour. How fast does she walk per hour? CAN SOMEONE HELP PLSSSS ITS THE LAST QUESTION Intro to Solving Literal Equations and Formulas Picture Below: I really don't know how to do give a comment so here is a comment I'd like to share this answer was totally incorrect, but I hate being rude or mean or even disrespectful to one's self but this was an incorrect answer for me PLEASE HELP WILL MARK BRAINEST!!!!Whats the answer to number 7? Question 2: 2.1 This poem contains words that are not grammatically correct or are informal. Explain why this type of language is acceptable in certain poems and stories but not in formal language. How does the poem benefit from the use of such language? (10) 2.2 The above poem suggests that the speaker has not had an easy life. Explain how the writer's choice of words influences the mood and feeling of the poem overall. Give three specific examples from the poem and elaborate on the feelings they generate. (10) Anyone know this please?! This art style depicts.objects.in its basic geometric forms Someone help me with this I will make you brain Parallel Lines Practice NO LINKS PLEASE and please explain this for me so i can understand What determines the price of goods in a free enterprise system? A. Agreement among producers B. Supply and demand C. Government agencies D. Five-year plans Which one is bigger, -3.142 or -0.5? Why would lines segments, rays, or planes not exist if points do not exist Indicate which property is illustrated in step 1 Which statement could describe the following sentence?"Scarlett needs to turn in their book to the library before late charges apply."1.The sentence is grammatically correct.2. There is a person agreement problem.3. There is a number agreement problem.4. There is a gender agreement problem. the colour of the shadow of coloured objects is not same as the colour of the objects